Unison supports the same option to be given several times as a command
line argument (e.g. unison -path xxx -path yyy).
This commit adds Home Manager support for this by allowing a list of
strings to be given to services.unison.pairs.<name>.commandOptions values.
# Veuillez saisir le message de validation pour vos modifications. Les lignes
* imapnotify: expose package (and exe) options
There are multiple packages that provide an imapnotify interface. Those
packages have differently named executables. This can now be customized.
This change also means test configurations can use stub packages.
* imapnotify: use/create config in configHome
Exposing the configuration file makes testing imapnotify configurations much
easier. It also allows for golden tests in home-manager.
* imapnotify: extend with launchd agent
Now that home-manager supports launchd agents, the imapnotify service
can be configured (and enabled) for darwin. The configuration matches
that of the linux/systemd version. In particular, by not setting a
`UserName`, this runs as the user whose configuration includes the
module.
Due to the launchd `Program` implementation (it must take an absolute
path) it is not possible to use that for the program and stub the path
in tests. Instead, this uses `ProgramArguments` for the program name.
The `ThrottleInterval` is equivalent to `RestartSec`. `KeepAlive` is
equivalent to `Restart`.
The `ExitTimeOut` default is 20 seconds, but goimapnotify should not
time out — this is achieved by setting the `ExitTimeout` to 0.
* imapnotify: add launchd plist test
This only tests the generated plist (which is new), not the original
systemd implementation, nor the json config file.
(Note the lack of a newline at the end of the plist file.)
This will reduce the system closure size by about 200MB under NixOS by
sharing the glibcLocales package.
When home-manager is installed on Linux without the NixOS module, all
glibc locales are installed, as before.
Resolves: #2333
The current `lla` alias, together with the `total-size` option try to get
the size of the `..` directory, and for this has to recursively open all
sibling folders. This may be super slow if some of those siblings
contain too many files, and raise a ton of useless errors if some of
those siblings contains non-readable files.
I'm suggesting to use `-A` instead, which will skip the obvious `.` and
`..` folders.
While here, I think we could also add `llt`.
Many of the terminals supported inside emacs work perfectly fine with STARSHIP.
The TERM=dumb case already handles the tramp and eterm cases, so as far as I can
tell, this is basically just a check for the benefit of OLD versions of
term-mode (see
emacswiki.org/emacs/AnsiTerm#:~:text=Historically%2C%20'M%2Dx%20ansi%2Dterm,the%20older%20'C%2Dc'%20binding.,
which indicates that it also now handles colors).
PR #3747 renamed the option wayland.windowManager.sway.systemdIntegration
to wayland.windowManager.sway.systemd.enable.
This commit simply updates documentation to reference the new format.
Starship has an advanced, experimental feature where fancy stuff in the
prompt can be replaced with something more simple after the command is
ran. This is very helpful for copy and pasting shell history somewhere
else.
docs: https://starship.rs/advanced-config/#transientprompt-and-transientrightprompt-in-fish
Fish is currently the only shell as far as I can tell that both
home-manager and starship support for this feature. Since the function
has to be called after starship is loaded, this seems like the best
place to put it.
format
* qt: always apply qt.style.package
Before this commit this was only being applied if `qt.platformName` was
set to "gnome". With this change we will always apply the package.
* qt: only set ~/config/Trolltech.conf in GTK or GNOME
* qt: add qtstyleplugin-kvantum-qt4 and qt6Packages.qtstyleplugin-kvantum
qt: add qtstyleplugin-kvantum-qt4
* news: add news entry about the qt module refactors
* qt: add thiagokokada as maintainer
* qt: add "qtct" to qt.platformTheme
This allows usage of qt5ct/qt6ct tool to configure Qt theme/icons/fonts
in non-KDE platforms.
* qt: add missing relatedPackages for qt.platformTheme = "kde"
* qt: add "kvantum" for qt.styles.name
This allow you to configure Qt integration using KDE instead of
qgnomeplatform or qtstyleplugins. Useful if your theme supports both GTK
and KDE, for example Nordic.
To use this properly you will need to do some manual configuration for
now. You can set the theme settings using `~/.config/kdeglobals`.
Example:
```nix
{ ... }:
{
qt = {
enable = true;
platformTheme = "kde";
};
xdg = {
configFile.kdeglobals.text = lib.generators.toINI { } {
General = {
ColorScheme = "nordicbluish";
Name = "nordic-bluish";
shadeSortColumn = true;
};
Icons = {
Theme = "Nordic-bluish";
};
KDE = {
LookAndFeelPackage = "Nordic-bluish";
contrast = 4;
};
};
dataFile = {
# For General.ColorScheme
color-schemes = {
source = "${pkgs.nordic}/share/color-schemes";
recursive = true;
};
# For KDE.LookAndFeelPackage
plasma = {
source = "${pkgs.nordic}/share/plasma";
recursive = true;
};
};
};
}
```
* aerc: add space after definitions
* aerc: only generate files, if options were set
* aerc: improve file permission warning
* aerc: remove redundant access to builtins
* aerc: allow overwriting of derived values
the order of merging the config subsets did not allow the user to specify
outgoing, source and password command values,
if they were previously derived from the SMTP, IMAP, Maildir etc config.
The values from `account.<name>.extraAccounts` now have the highest precedence.
Appropriate tests were added as well.
* aerc: write primary account first
* Add infrastructure for contacts and calendars
This also adds the modules
- programs.vdirsyncer,
- programs.khal, and
- services.vdirsyncer
that integrate with the new infrastructure.
Co-authored-by: Andrew Scott <3648487+ayyjayess@users.noreply.github.com>
Co-authored-by: Sebastian Zivota <sebastian.zivota@mailbox.org>
wip
* vdirsyncer: allow option userName, disallow userNameCommand
1. account option `userName` is now allowed by `programs.vdirsyncer`
2. The commented out account option `userNameCommand` was required to be set
by `programs.vdirsyncer` (e.g. as `null`).
It is now disallowed (commented out) by vdirsyncer.
* khal: added options 'color' and 'priority'
* Apply nixfmt
---------
Co-authored-by: Sebastian Zivota <sebastian.zivota@mailbox.org>
Co-authored-by: Johannes Rosenberger <johannes.rosenberger@jorsn.eu>
Co-authored-by: Johannes Rosenberger <johannes@jorsn.eu>
Co-authored-by: Robert Helgesson <robert@rycee.net>
* sway: add support for XDG autostart using systemd
Using the option wayland.windowManager.sway.systemd.xdgAutostart, users
can now choose to start applications present in
$XDG_CONFIG_HOME/autostart when starting their sway session.
This change also renames wayland.windowManager.sway.systemdIntegration
to wayland.windowManager.sway.systemd.enable;
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* sway: add Scrumplex to maintainers
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
---------
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* boxxy: add module
* boxxy: added nikp123 to maintainers list
* boxxy: use mkPackageOption instead for the package
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: use yaml generator instead of json
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: various fixes
* boxxy: various fixes (part 2)
* boxxy: various fixes (part 3)
* boxxy: various fixes (part 4)
forgot to run ./format, whoops
* boxxy: use literalExpression for the rewrite example
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: add news entry
---------
Co-authored-by: Naïm Favier <n@monade.li>
* Revert "maintainers: add rasmus-kirk as a maintainer"
This reverts commit 301b364892.
* Revert "joshuto: add the joshuto file manager"
This reverts commit e7fdcb40b2.
* Fix espanso module to work with 2.x version
* espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and
`match` folder.
* Espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and `match` folder.
Add descriptions
* Add versionAtLeast and mkRemovedOptionModule
* Correct maintainers list
* remove config key from example
* format basic-configuration.nix
* Update modules/services/espanso.nix
Co-authored-by: Naïm Favier <n@monade.li>
* fix maintainers list
---------
Co-authored-by: Naïm Favier <n@monade.li>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
* home-environment: add `home.sessionVariablesPackage`
Allow the `hm-session-vars.sh` derivation to be referenced from other
modules, e.g. to translate it to fish with babelfish at build time.
* fish: use babelfish for `hm-session-vars.sh`
Translate `hm-session-vars.sh` to fish at system build time,
significantly decreasing shell startup time.
Based on https://github.com/NixOS/nixpkgs/pull/108947 by @kevingriffin.
This is backwards compatible and allows for more flexibility(eg.
allows for defining custom waybar modules in separate nixos modules,
before merging them together)
Co-authored-by: mae <git@badat.dev>
Make use of the recently added nullable `mkPackageOption` feature
to disable installing an SSH client by default: most people should use
the client provided by their system.
The generation activation script should be run by the user specified
in `home.username` and `home.homeDirectory`. If some other user runs
the activation script, then files may end up in the wrong place or
with the wrong owner.
This commits adds a check early in the activation script that verifies
that the running user match the user in the configuration.
Fixes#4019
Kitty provides integrations for bash, fish and zsh. The new
programs.kitty.shellIntegration options allow the configuration of
these integrations.
See <https://sw.kovidgoyal.net/kitty/shell-integration> for more details.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* zellij: adds options to integrate with zsh, bash and fish shells
* zellij: add tests for shell integration options
* zellij: eval setup auto start for fish integration
* zellij: use interactiveShellInit for fish integration
* zellij: fixes format issues
* zellij: enable shell integrations by default
* zellij: compresses shell integration test cases
* zellij: removes the disabled shell integration tests
* zellij: formats tests
* pass-secret-service: Add dbus file, assert
Add the dbus service file in the package folder to XDG_DATA_HOME, as
well as adding an assertion to ensure both it and `gnome-keyring` aren't
enabled at the same time.
* pass-secret-service: Add self to CODEOWNERS
* pass-secret-service: Call out conflicting module(s)
* pass-secret-service: Revert `storePath` change
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* pass-secret-service: Add password-store module default changes info
* pass-secret-service: Fix default info, modularize conflict checks
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* Revert "pass-secret-service: Fix default info, modularize conflict checks"
This reverts commit 851df4fe49.
* pass-secret-service: Fix default info
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* pass-secret-service: Indent `storePath` description
---------
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* himalaya: add soywod to maintainers
* himalaya: make the config safer
Also added two services and more tests.
* himalaya: fix doc + typos
* himalaya: use freeform
* himalaya: run ./format
* himalaya: make use of mkPackageOption
It's pretty common to need multiple bindings to
history-substring-search, since different terminals will send different
keys for up/down.
This does not break back-compatibility, and introduces a new test
The current zplug nixpkgs puts everything under `$out/`. It pollutes the nix
profile dir.
This is a breaking change. It depends on an change of the output path in the
nixpkgs zplug package.
Virtual mailboxes (described by Notmuch queries) can now configured for each account in NeoMutt.
Plus, it is possible to disable Notmuch section for a specific account.
Without this, even if you configure a preference for Electron apps to
use Ozone by setting `NIXOS_OZONE_WL=1`, GUI apps launched through
systemd user services use XWayland, since the variable is not set in
their environment.
This fixes that issue by importing it, like we do other variables.
The previous implementation tried to rename the tag named "default" to
the first tag in `cfg.tags`. This was a wrong approach because if a
tag with the same name already existed, the renaming failed and the
default tag would continue to exist.
The looking up of the default tag also contained a bug because it
should have used `by-name` in the path.
Before this change, the default config provided by this module wrote
an empty file to `$HOME/.config/avizo/config.ini`, which caused a
bunch of errors, as Avizo tries to read a 'group' from the ini file,
which fails.
This commit also adds associated test cases.
PR #3871
The added extraConfig option allowes users to insert custom text at
the end of the generated profile `user.js` file. This allows the users
to import templates as part of their configuration.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
The Nix profiles path may not exist right after installing Nix. In
that case, it is created on demand by the Nix CLI tools. However, Home
Manager assumes it exists and fails if it doesn't.
This change makes sure to trigger the creation of the Nix profiles
path before attempting to access it.
If the user runs a recent Nix version that places per-user profiles in
`$XDG_STATE_DIR/nix/profiles`, then migrate the home-manager profile
there.
Also clean up `setupVars` a bit.
While technically dconf on darwin could work, our activation step
requires dbus, which only *lightly* supports Darwin in general, and not
at all in the way it's packaged in nixpkgs. Because of this, we just
disable dconf for darwin hosts by default.
In the future, if someone gets dbus working, this _could_ be re-enabled,
unclear whether there's actual value in it though.
link the packpath in expected folder so that even unwrapped neovim can pick home-manager's plugins.
I sometimes need to run neovim not wrapped/configured by nix (when
developing neovim or when other projects bring their own neovim in
PATH). Currently they dont find plugins installed by home-manager in the
cases where packpath is not set to the generated nix packpath directory.
With this change, neovim can discover HM-installed plugins by itself.
Some of the email providers (like GMail and Fastmail) save Sent messages
automatically, so make the folders optional in the configuration.
Make Drafts folder optional as well, to allow it to be configured
manually in the extraConf with location outside of the maildir.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
* i3status-rust: update it to handle 0.30.x releases
0.30.0 is a major release that brings many breaking changes to the
configuration file. See:
https://github.com/greshake/i3status-rust/blob/master/NEWS.md#i3status-rust-0300
The only one that actually affects the module though is the change in
how the theme/icons are defined. Other changes are mostly on how to
specify formatting/blocks, and since we just generate the TOML as-is, it
needs changes in the user side.
So most changes in this commit are documentation updates, having
up-to-date examples from things that changed, e.g.: the new `click`
attribute that now can be applied to any block.
* i3status-rust: only use new format if i3status-rust >= 0.30.0
* news: document the i3status-rust changes
* i3status-rust: add thiagokokada as maintainer
The `XCURSOR_*` environment variables specified in libxcursor
are used by many applications and libraries to load and configure
cursor settings. Setting these variables is a no-op if ignored but
is useful as a fallback when other sources of configuration are
unreliable.
This commit sets some commonly used `XCURSOR_*` environment variables
(i.e XCURSOR_THEME, XCURSOR_SIZE) by default when `home.pointerCursor`
is enabled.
The init command is essentially the old install script but integrated
into the home-manager tool. This simplifies things slightly since we
can use the existing code infrastructure.
The init command is Nix flake aware in the sense that, if we detect
that the user's Nix setup supports flakes, then we also create an
initial `flake.nix` file.
Finally, we update the installation instructions for the Nix flakes
standalone setup to use the new init command.
Zsh completion update provided by Anund <anundm@gmail.com>.
This command adds the ability to specify lists of qutebrowser
commands as values for key bindings, which avoids the need for
concatenating commands with ` ;; `.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
This changes the default configuration location for Home Manager
configurations from
$XDG_CONFIG_HOME/nixpkgs
to
$XDG_CONFIG_HOME/home-manager
The old location is still supported but using it will trigger a
warning message.
Fixes#3640
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
Added a generator for the KDL document language.
This is in order for home-manager to natively generate
the new config format for zellij, as described in nix-community#3364.
There is not a one to one mapping between KDL and nix types,
but attrset translation is heavily based on KDLs JSON-IN-KDL microsyntax.
The exception here is the `_args` and `_props` arguments, which lets you
specify arguments and properties as described in the spec.
See more here:
- https://kdl.dev/
- https://github.com/kdl-org/kdl/blob/main/SPEC.md
The generator also conforms to the interface from the nixpkgs manual:
https://nixos.org/manual/nixpkgs/stable/#sec-generators
Co-authored-by: Gaetan Lepage <gaetan@glepage.com>
Specifically, if the global per-user profiles path do not exist and we
cannot create it during the activation, then place our profile in the
Home Manager data directory. We prefer to use the global location,
though, since it makes it visible to `nix-collect-garbage`.
This is intended to improve compatibility with Nix version 2.14 and
later, which no longer creates the per-user directories.
Also, use the Home Manager data directory to manage the gcroot for the
current generation. It does not have to sit in the global per-user
gcroots directory since it should never be eligible for GC.
If used inside the NixOS/nix-darwin module, we get conflicting definitions
of `name` inside the specialization: one is the user name coming from the
NixOS module definition and the other is `configuration`, the name of this
option. Thus we need to explicitly wire the former into the module arguments.
See discussion at https://github.com/nix-community/home-manager/issues/3716
* exa: add more options
* exa: use `escapeShellArgs`
* exa: don't hardcode executable path in aliases
Prevents aliases from going stale in open terminals when the system is updated.
* exa: use `command` for self-referential alias
Otherwise fish complains about the recursive call.
Drop the aliases from ion shell since it doesn't implement the POSIX
`command` built-in.
* exa: re-add ion aliases
* exa: drop `command`
Fish doesn't complain about recursion if `exa` isn't escaped.
---------
Co-authored-by: Naïm Favier <n@monade.li>
The `-X` prevents that screen is cleared when showing a diff that's
larger than my screen.
I.e. when running `git diff` and press `q`, the last thing I want to see
is the prompt with `git diff` and *not* the part of the diff I browsed,
to be clear
$ git diff
$ <cursor>
Considering that this is somewhat opinionated, I decided to build an
option which allows you to pass arbitrary commands to the less
invocation.
Xsession (and hence ~/.xsession) is executed in bash but does not set
SHELL to the full path to bash. In case the user's login shell is
something other than bash then SHELL is set to that shell. Keychain
inspects the SHELL variable to find out what shell it has to generate
code for, so in .xsession it generates code for the user's login shell
instead for bash.
This change forces SHELL to bash for keychain when invoked from
.xsession, the same way it's done when generating keychain's code for
bash integration.
Closes#3693
* vscode: add extensions.json file in extensions dir
This change generates an 'extensions.json` file the same way that
nixpkgs' vscode-with-extensions does, and makes sure it is placed in the
directory with the extensions.
* vscode: remove leftover trace
Co-authored-by: Naïm Favier <n@monade.li>
* vscode: fix adding extensions.json with mutable extension dir
Co-authored-by: Naïm Favier <n@monade.li>
* vscode: let vscode regenerate the mutable extensions.json
* Remove nixpkgs duplication; only apply on vscodes new enough to need it
* Use lib.versionAtLeast
Co-authored-by: Naïm Favier <n@monade.li>
* Format vscode.nix
---------
Co-authored-by: Naïm Favier <n@monade.li>
Allow modules to define systemd services on macOS. It won't actually
have any effect, but it would allow modules to define both systemd
services and launchd agents without boilerplate conditionals.
As a consequence of this change, each module would have to check for
compatibility with the OS target instead.
Internally we already managed them per-profile but exposed a global
option to maintain backwards compatibility. The benefit to having
per-profile extensions is quite large though, so it is time to switch.
Users of the global extensions option will get an error message that
indicates how to edit their configuration to work again.
Firefox internally only supports bool, int, and string types for
preferences, but often stores objects, arrays and floats as strings.
This change makes it nicer to specify those type of preferences in
Nix, and it also makes it possible to merge objects & arrays across
multiple modules.
This reflects a systemd service sample file change made in borgmatic
1.7.6, commit 2e9f70d49647d47fb4ca05f428c592b0e4319544:
When backing up a machine with a monitor using logind to control
idle timeout and things like DPMS, borgmatic can block the screen
from turning on/off with systemd-inhibit. This is because by
default systemd-inhibit will block
"idle:sleep:shutdown". Borgmatic does not need to care about idle,
only about suspend and shutdown. So, add an explicit `--what` flag
for what borgmatic should inhibit.
For more information see systemd-inhibit(1).
Some JVMs pass through `home` as a derivation rather than as a string, as `openjdk` does. Since the module option for session variables expects a string, this is a type error. I suspect that this incorrect, and have changed the assignment here to coerce the `cfg.package.home` attribute to a string to be safe.
After discussing with @NobbZ, we have decided it is best to mitigate this problem in HM rather than to make potentially breaking changes to Nixpkgs.
Please do mention if you think we ought to propose a change to Nixpkgs instead.
Allow setting the application package and storePath used by the
config. Since the `programs.password-store` Home Manager module sets
config values via global environment variables, the default behavior
of the module should continue to behave as before for the user.
Additionally,
- Adds a few tests.
- Use "escapeShellArg" function call to the path parameter call to
ensure paths with spaces work.
- Allow not setting storePath, which will cause `pass_secret_service`
to default to using `~/.password-store`.
- If `pass-secret-service` is enabled, set its store path to default
to the one defined in our password-store environment settings.
- Add myself (houstdav000) as maintainer.
Fish shell doesn't require arguments to `eval` to be double quoted
like in a bash shell. At the moment doing so gives us the following
error:
~/.config/fish/config.fish (line 12): $(...) is not supported. In fish, please use '(/nix/store/8asq…)'.
eval "$(/nix/store/8asqgnhs89wzyjvs8p1n5hvxn7lkn9wa-opam-2.1.3/bin/opam env --shell=fish)"
^
from sourcing file ~/.config/fish/config.fish
called during startup
source: Error while reading file “/home/user/.config/fish/config.fish”
This commit fixes the above error.
The default value of `programs.ncmpcpp.mpdMusicDir` is taken from
`services.mpd.musicDirectory` if the mpd module is enabled, which has
type `either path str`. `programs.ncmpcpp.mpdMusicDir` did not accept
`str` values, though, so an error was raised when the default value was
used and `services.mpd.musicDirectory` was set to a value of type `str`.
This commit changes the type of `programs.ncmpcpp.mpdMusicDir` to also
accept `str` to reflect the type of `services.mpd.musicDirectory`.
Fixes#3560
* home-environment: use `lazyAttrsOf` for `home.sessionVariables`
`attrs` has unreasonable merge semantics and is deprecated. `attrsOf`
doesn't support variables depending on each other as is recommended in
the option's description.
* home-environment: restrict `sessionVariables` type
The consumer is `toString`, but we don't want to accept e.g. lists.
Assigning to `programs.neovim.extraLuaPackages` a function taking a lua package set as input
and returning a list of packages, as described in the documentation,
threw an error because the rest of the code assumed that the value was always a plain list.
Using `lib.types.coercedTo`, we can accept such functions, as per the documentation,
as well as plain lists, which we then convert to a function ignoring its input argument.
We print a warning when a plain list is assigned, since the function
form is preferred, as it ensures that the right lua package set is used.
For the lua packages, we also get the lua package set from the
finalPackage, to make sure that we are always using the same package set
as the actual unwrapped neovim package being built.
For `programs.neovim.extraPythonPackages` I did the same.
I updated the test case so that we test both ways of setting these options.
This enables nushell integration by default for direnv, similar to
bash/zsh/fish. The slightly verbose way of setting this is to ensure
that peoples' existing nushell configuration isn't overwritten, only
appended to, as would be the case if we just used the integration
example from the nushell docs:
https://www.nushell.sh/cookbook/direnv.htmlCloses#3520
Previously the nushell module did not differentiate between Linux and
Darwin when deciding where to place config files, whereas nushell
does. This commit fixes that.
The default value for `xsession.windowManager.herbstluftwm.tags` is an
empty list, but the config file uses `builtins.head` on it, which causes
an error upon evaluation. With this change the tags configuration is
skipped if the list is empty.
The previous variant used IFD to generate the `JAVA_HOME` variable and relied on internal hooks of the `java` package, this failed for a user cross compiling their configuration.
This PR changes that and uses the `home` attribute, as documented in the very last sentence of the https://nixos.org/manual/nixpkgs/stable/#sec-language-java chapter.
The old trigger would actually never cause a restart since the path
doesn't change. With this change the trigger is now using the actual
configuration path in the Nix store, which depends on the content.
While this is created to match `himalaya`’s configuration API, this
could easly be reused for other programs that consume the email module
by concatination the strings.
The previous version linked the file into home, then sourced that. Since
nothing else expects that file to be there, this is unnecessary.
Additionally, doing so made it impossible to test a built config without
switching, e.g. using `XDG_CONFIG_HOME=… nvim` or `nvim -u`. This
remedies that, at least for this particular reference.
To test this, change from asserting contents of the config file to
actually starting nvim, outputting sentinel values, and then asserting
their values are present. This way it’s tested that nvim loaded the
config, rather than that some config is in a specific place.
This is all in one commit as the test, as written now, would not have
worked before since the previously hard-coded home path was not an
actual file in the test environment.
Specifically, inform the command about the absolute path of
dbus-daemon. Otherwise it will try running dbus-daemon from PATH,
which may not always work.
PR #3405
* ssh: add generic Match support for matchBlocks
Introduce conservative support for actual `Match`
blocks in ssh config.
"Conservative" means this PR doesn'tt try to process
the `match` expression and simply uses it as a string
provided by the user.
If set, `match` has precedence over `host` meaning
if both are set, `match` is used and `host` is ignored.
* Add news entry
Rather than reject a configuration when this option is set, just
silently ignore it when the platform isn't darwin. The name makes it
obvious that it won't be applied outside of darwin, and this allows
people to use the same configuration between hosts without any special concern.
Co-authored-by: Nicholas Sielicki <git@opensource.nslick.com>
This commit allows imperative management of "urls" file. It can be
useful if "urls" file is treated as a secret.
With this change, it's possible to provision "urls" via Syncthing,
agenix, sops-nix or other means, while still managing Newsboat
declaratively.
`--experimental-backends` flag was removed in the recent released picom
v10. Using it now will result in the program exiting.
v10 also introduces its counter-part, `--legacy-backends`. However this
will be removed soon. Instead of adding this as an separate option, add
`extraArgs` option so for those that they want they can pass it manuall.
It is also more future proof.
Previously, this module was all-or-nothing with its pre-defined user
dirs. This allows e.g. `xdg.userDirs.desktop = null;` to opt-out of
some configuration while still benefiting from the rest.
Starting with state version 22.11 we completely reset the PATH
variable in the activation script. This is to avoid impurities and
unexpected results if the activation script accidentally uses a
command found in the user's PATH.
When using the new style profiles we get conflicts when trying to
replace the old `home-path` derivation. To avoid this conflict we
delete the old `home-path` before the install.
Unfortunately, `nix profile` does not yet have a equivalent for
`nix-env --set` and we have to do this hackish workaround. See
https://github.com/NixOS/nix/issues/6349
for the associated issue in Nix.
Fixes#2848
Add a new Thunderbird module that uses the configuration in
`accounts.email.accounts` to setup SMTP and IMAP accounts.
Multiple profiles are not supported at this point.
- The `XDG_SESSION_TYPE` environment variable is used by some applications and frameworks to
detect wayland sessions (i.e qt5/6, electron/chromium). It is set by wlroots since version 0.13.0 [1].
- Propagating `XDG_SESSION_TYPE` to the systemd user environment is necessary when processes launched by
services (e.g emacs) need to inherit the environment variable.
[1] - 90c8452959
Update notification popups are annoying when vscode/vscodium is
managed by Home Manager. However, as these settings also require the
configuration to be managed via `userSettings`, they are disabled by
default.
This commits adds a file `hm-version` to the generated generation
directory. This file will contain the release version, and if
available, the Git commit hash.
With this change, it's now possible to configure the default search
engine in Firefox with
programs.firefox.profiles.<name>.search.default
and add custom engines with
programs.firefox.profiles.<name>.search.engines.
It's also recommended to enable
programs.firefox.profiles.<name>.search.force = true
since Firefox will replace the symlink for the search configuration on
every launch, but note that you'll loose any existing configuration by
enabling this.
This will cache the output of `passwordCommand` per authentication
realm.
Context: the `credentials` key in `sbt` is a `TaskKey[Seq[Credentials]]`.
In `sbt`, tasks are evaluated on-demand and their output is not cached.
This particular key is referenced by all submodules in a project. When
the command is relatively expensive (e.g.: `pass show foo`), this
results in several seconds of delay when doing basic things like
`compile` or `test` which makes this unusable without some kind of
caching.
sbt allows overriding the default repositories to use to resolve
dependencies. This is often used with proxies and/or private
repositories to host internal packages.
This change adds a `repositories` attribute to `sbt` to allow
specifying the values that will go in `~/.sbt/repositories` file.
To support the above change we also deprecate the `baseConfigPath`
option in favour of `baseUserConfigPath` which points one level higher
by default. This allows not using relative paths to refer to the
top-level configuration directory.
Also adds tests for the new option and the deprecation of the previous
one.
At commit [5666e6b9](5666e6b9fb),
broot refactored the content of the file `/resources/default-conf.hjson`
into multiple files under the directory `/resources/default-conf`, using
[`imports`](5666e6b9fb/resources/default-conf/conf.hjson (L152-L165))
to refer to other configurations.
This refactoring is effective since version 1.14.0 of broot.
After this refactoring, in `xdg.configFile.broot` (which defaults to
`~/.config/broot`):
- we need to copy all potentially referenced files (all files under
`resources/default-conf`),
- except we need to leave out `conf.hjson` which conflicts with the
`conf.toml` generated by home-manager (because broot [accepts both conf.toml and conf.hjson](https://dystroy.org/broot/conf_file/))
To implement this, we use `symlinkJoin` to create the content of
`xdg.configFile.broot` by merging multiple sources.
* broot: use freeformType for config
* broot: use defaults from upstream
closes#2395
* broot: generate shell function
* broot: add @dermetfan to CODEOWNERS
* broot: rename `config` option to `settings`
* broot: make example more idiomatic
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
We change the current logic: instead of writing an init.vim which loads
lua/init-home-manager.lua, we write an init.lua that sources init.vim
This commit also avoids writing any of these files if the plugins have
no config.
Some configuration options can take space separated strings; for
example `SSLVersions` can be configured with multiple allowed
versions.
SSLVersions TLSv1.3 TLSv1.2
This can now be represented in Home Manager.
SSLVersions = [ “TLSv1.3” “TLSv1.2” ];
In implementing this change, it uses oneOf for config type, as it is a
cleaner way to represent the union than the nested eithers
formulation.
Also add SSLVersions to test lists of strings in
`account.extraConfig`.
If the user has enabled the XDG user directories module then we can
use the XDG music directory in the MPD module. Otherwise we'll leave
the option undefined so that the user is forced to define the
directory to use.
This applies to state version 22.11 and above.
Fixes#3225
Instead of referencing the `HOME` environment variable, use the
`home.homeDirectory` option. This allows other modules to reference an
XDG user directory without having to support shell syntax.
Units with
Install.RequiredBy = [ target ]
set will now be linked in the
${target}.requires
directory. Similar to how `Install.WantedBy` already causes a link in
the
${target}.wants
directory.
The `tag.gpgSign` config option was added in Git 2.23.0 and seems like
it should be set in addition to `commit.gpgSign` when
`programs.git.signing.signByDefault` is enabled
The GNU Privacy Guard 2.3 man page for `gpg-agent` describes the
`--grab` and `--no-grab` options as follows:
> Tell the pinentry to grab the keyboard and mouse. This option should
> be used on X-Servers to avoid X-sniffing attacks. Any use of the
> option --grab overrides an used option --no-grab. The default is
> --no-grab.
Therefore Home Manager should explicitly output `grab` when
`cfg.grabKeyboardAndMouse` is true. Previously Home Manager emitted
`no-grab` when `cfg.grabKeyboardAndMouse` was false.
PR #3192
everything is now covered by other settings that are more user friendly
than this big opaque attrset.
Also 'configure' wont do anything with nixpkgs-unstable the way HM
configures neovim. so no need to keep it, the deprecation warning is > 1
year old.
This adds support for configuring email accounts, with automatic smtp, imap,
sendmail (msmpt) and maildir (mbsync, offlineimap) setup in aerc,
via `accounts.email`.
The XDG Desktop Entry spec mentions that multiple values per key may be
optionally terminated by a semicolon. An example for this is the Firefox
desktop file, which has no trailing semicolon. This breaks the sed regex
used in `mimeAssociations`.
Fix the regex by matching the end of string, optionally preceded by a
semicolon, or any other semicolon. This makes it work with both
semicolon-terminated and non-semicolon-terminated desktop files.
In the scenario where some XDG user directory is a symlink defined by
`home.file`, we want the symlink to be created before we try to
`mkdir -p` that directory, as it will then silently succeed. On the
other hand, if we create the directory first, creating the symlink
will fail.
We lose nothing by doing this as `linkGeneration` creates the
directories it needs.
This patch follows a similar patch[1] in nixpkgs. With this patch,
fish can complete manpages for programs installed through
home-manager, e.g., using home.packages.
[1]: https://github.com/NixOS/nixpkgs/pull/91794
Specifically,
- directly export `modules/lib/dag.nix` instead of renaming
attributes,
- run through utilities to reuse code where possible,
- expose `lib.hm.dag.isEntry` and reuse it in
`modules/lib/types-dag.nix`,
- reuse utilities through `lib` set instead of passing imports to
functions, and
- eta reduction of `map`, `entryAnywhere`, `entryAfter` and
`entryBefore`.
bash and zsh apparently handle command substitution slightly differently
than fish. in bash/zsh:
$ export FOO=x
$ FOO=y echo $(sh -c 'echo $FOO')
x
whereas in fish:
$ export FOO=x
$ FOO=y echo $(sh -c 'echo $FOO')
y
so we have to assign $SHELL within the substitution for bash and zsh.
The `services.picom.opacityRule` option was renamed to
`services.picom.opacityRules`.
This was missed in #2939
Signed-off-by: Sumner Evans <me@sumnerevans.com>
swayidle executes commands using "sh -c" and so its PATH must contain
a shell. This adds such PATH entry to the environment of the systemd
service.
Fixes#2811.
Removes the `uniq` constraint on `after` and `before` so that we can
merge multiple definitions for the same DAG entry:
{
dag = mkMerge [
{
foo = lib.hm.dag.entryBefore [ "bar" ] {
# definition 1
};
}
{
foo = lib.hm.dag.entryBefore [ "qux" ] {
# definition 2
};
}
{
foo = {
# definition 3
};
}
];
}
In this example `foo` will come before `bar` and `qux`.
This brings a few advantages:
- Use of float instead of strings to represent float values,
- Use of structure settings, and
- Better type checking for some settings
Also add thiagokokada as codeowner of picom.
Adds option settings, which writes settings to
.config/udiskie/config.yml.
Note, the option takes precedence against other options like notify,
automount or tray if they are configured in settings.program_options.
Per the [docs], MCFLY_FUZZY is no longer a boolean, taking now a
positive integer that controls the fuzziness factor.
[docs]: https://github.com/cantino/mcfly#fuzzy-searching
Co-authored-by: Robert Helgesson <robert@rycee.net>
mujmap is a tool that synchronizes mail between a mail server and
notmuch via JMAP. It's very similar to lieer, so I heavily based the
implementation of the notmuch module on lieer's. I did not include an
equivalent to lieer's periodic synchronization service, however,
because I plan to soon introduce a daemon mode to mujmap.
https://github.com/elizagamedev/mujmap
The user should always explicitly set the state version they wish to
use. Indeed, the configuration generated by the Home Manager install
script has set this option for a long time. This removal should
therefore not affect many users.
Add services.emacs.startWithUserSession boolean to indicate that Emacs
must be started with the systemd user session. This is true by default
unless socket activation is also true.
In the past, the user had to choose between socket activation (to get
the Emacs service started when the user uses emacsclient) and
immediate start with the user session. When choosing immediate start
over socket activation and if the Emacs service is stopped at some
point, using emacsclient would start a new Emacs daemon but the
service would still be turned off. This situation would prevent
`home-manager switch` from completing successfully because it wouldn't
be able to start the Emacs service as Emacs is already running.
This new setting makes it possible to have both socket activation and
immediate start at the same time. In this scenario, Emacs is started
with the user session and, after the Emacs service is stopped, using
emacsclient starts the service again.
This new settings also makes it possible to have neither socket
activation nor immediate start.
Currently translated at 100.0% (14 of 14 strings)
Add translation using Weblate (Catalan)
Co-authored-by: Leix b <abone9999@gmail.com>
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/ca/
Translation: Home Manager/Home Manager Modules
* Add flake.lock and clean up flake.nix
Add a lockfile to work around https://github.com/NixOS/nix/issues/6541
(and because it's a good idea anyway).
Also use flake-utils, and restrict ourselves to the five platforms
supported by nixpkgs. Otherwise, the IFD for nmd fails on weird
platforms. This fixes `nix flake check`.
Remove the redundant `apps` output, see https://github.com/nix-community/home-manager/pull/2442#issuecomment-1133670487
* nixos,nix-darwin: factor out into a common module
* nixos,nix-darwin: make `home-managers.users` shallowly visible
Make sure the option is included in the NixOS/nix-darwin manual (but the
HM submodule options aren't).
Also add a static description to the HM submodule type so that we don't need to
evaluate the submodules just to build the option manual. This makes
nixos-search able to index the home-manager flake.
Also clean up some TODOs.
* flake: add nmd and nmt
This avoids having to use `pkgs.fetchFromGitLab` in an IFD, which causes
issues when indexing packages with nixos-search because `pkgs` is
instantiated with every platform.
The `getmail` package will soon be removed from nixpkgs. The
`nixos-unstable` channel already has it removed and using the service
will result in:
error: getmail has been removed from nixpkgs, migrate to getmail6
Upgrade to the getmail6 package which is already available and backwards
compatible.
M_SHARE is not a valid column on Darwin. It seems that previously htop
ignored unknown columns, but the current version does not display all
subsequent columns.
This is adapted from the `services.mopidy` NixOS module. The
difference is the setting can be configured with Nix language, taking
advantage of generators from nixpkgs. The module is also suited more
for user-specific configuration, removing the `extraConfigFiles` and
`dataDir` option.
- Change the example value of `gtk.theme.package` from
`pkgs.gnome.gnome_themes_standard` was an alias that was removed on 2022-01-13,
`pkgs.gnome-themes-extra`, which references the actual package.
- Change the example value of `gtk.icon.package` from `pkgs.adwaita-icon-theme` to
`pkgs.gnome.adwaita-icon-theme`, as this package is in the `gnome` package set.
* home.pointerCursor: init
The current architecture for cursor configurations is composed of individual
options for different backends. For example, X specific settings are managed under
`xsession.pointerCursor` and gtk specific settings are managed under `gtk.cursorTheme`.
While this architecture is modular, it causes duplication of similar structures for
each component. In theory, this provides flexibility because the components are independent
of each other which can be arranged in arbitrary ways to achieve the desired result.
However in practice, users wish to have one cursor theme applied to their entire system
The duplication of options correspond to duplication of settings on the user side and it
becomes a burden to keep track of all necessary settings.
This commit is an attempt to unify cursor configurations for different window systems and
GUI toolkits based on https://github.com/nix-community/home-manager/pull/2481#issuecomment-978917480.
`home.pointerCursor` is introduced as the interface for all cursor configurations.
It contain all options relevant to cursor themes with eneral options delcared under `home.pointerCursor.*`
and backend specific options declared under `home.pointerCursor.<backend>.*`. By default, a backend
independent configuration is generated. Backend specific configurations can be toggled via the
`home.pointerCursor.<backend>.enable` option for each backend. This was decided over using a
list of enums because it allows easy access to the state of the backend. Note generating different
cursor configurations for different backends is still possible by defining only `home.pointerCursor`
and managing the respective options manually.
* xcursor: migrate options to home.pointerCursor
- Removed `xession.pointerCursor` as x11 cursor configurations are now handled in `home.pointerCursor.x11`.
- Updated `meta.maintainer` field in `home.pointerCursor` and CODEOWNERS.
