home-manager: prepare release 24.05

README.md

@@ -28,7 +28,7 @@ Releases
 Home Manager is developed against `nixpkgs-unstable` branch, which often causes
 it to contain tweaks for changes/packages not yet released in stable [NixOS][].
 To avoid breaking users' configurations, Home Manager is released in branches
-corresponding to NixOS releases (e.g. `release-23.11`). These branches get
+corresponding to NixOS releases (e.g. `release-24.05`). These branches get
 fixes, but usually not new modules. If you need a module to be backported, then
 feel free to open an issue.
 
@@ -49,7 +49,7 @@ dconf store and cannot tell whether a configuration that it is about to be
 overwritten was from a previous Home Manager generation or from manual
 configuration.
 
-Home Manager targets [NixOS][] unstable and NixOS version 23.11 (the current
+Home Manager targets [NixOS][] unstable and NixOS version 24.05 (the current
 stable version), it may or may not work on other Linux distributions and NixOS
 versions.
 

docs/manual/installation/nix-darwin.md

@@ -15,10 +15,10 @@ $ nix-channel --add https://github.com/nix-community/home-manager/archive/master
 $ nix-channel --update
 ```
 
-and if you follow a Nixpkgs version 23.11 channel, you can run
+and if you follow a Nixpkgs version 24.05 channel, you can run
 
 ``` shell
-$ nix-channel --add https://github.com/nix-community/home-manager/archive/release-23.11.tar.gz home-manager
+$ nix-channel --add https://github.com/nix-community/home-manager/archive/release-24.05.tar.gz home-manager
 $ nix-channel --update
 ```
 
@@ -45,7 +45,7 @@ home-manager.users.eve = { pkgs, ... }: {
 
   # The state version is required and should stay at the version you
   # originally installed.
-  home.stateVersion = "23.11";
+  home.stateVersion = "24.05";
 };
 ```
 

docs/manual/installation/nixos.md

@@ -17,10 +17,10 @@ $ sudo nix-channel --add https://github.com/nix-community/home-manager/archive/m
 $ sudo nix-channel --update
 ```
 
-and if you follow a Nixpkgs version 23.11 channel, you can run
+and if you follow a Nixpkgs version 24.05 channel, you can run
 
 ``` shell
-$ sudo nix-channel --add https://github.com/nix-community/home-manager/archive/release-23.11.tar.gz home-manager
+$ sudo nix-channel --add https://github.com/nix-community/home-manager/archive/release-24.05.tar.gz home-manager
 $ sudo nix-channel --update
 ```
 
@@ -44,7 +44,7 @@ home-manager.users.eve = { pkgs, ... }: {
 
   # The state version is required and should stay at the version you
   # originally installed.
-  home.stateVersion = "23.11";
+  home.stateVersion = "24.05";
 };
 ```
 

docs/manual/installation/standalone.md

@@ -19,10 +19,10 @@
     $ nix-channel --update
     ```
 
-    and if you follow a Nixpkgs version 23.11 channel you can run
+    and if you follow a Nixpkgs version 24.05 channel you can run
 
     ``` shell
-    $ nix-channel --add https://github.com/nix-community/home-manager/archive/release-23.11.tar.gz home-manager
+    $ nix-channel --add https://github.com/nix-community/home-manager/archive/release-24.05.tar.gz home-manager
     $ nix-channel --update
     ```
 

docs/manual/nix-flakes/standalone.md

@@ -11,10 +11,10 @@ then to generate and activate a basic configuration run the command
 $ nix run home-manager/master -- init --switch
 ```
 
-For Nixpkgs or NixOS version 23.11 run
+For Nixpkgs or NixOS version 24.05 run
 
 ``` shell
-$ nix run home-manager/release-23.11 -- init --switch
+$ nix run home-manager/release-24.05 -- init --switch
 ```
 
 This will generate a `flake.nix` and a `home.nix` file in
@@ -30,7 +30,7 @@ $ # Edit files in ~/.config/home-manager
 $ nix run home-manager/$branch -- init --switch
 ```
 
-Where `$branch` is one of `master` or `release-23.11`.
+Where `$branch` is one of `master` or `release-24.05`.
 
 After the initial activation has completed successfully then building
 and activating your flake-based configuration is as simple as

docs/manual/usage/configuration.md

@@ -20,7 +20,7 @@ A fresh install of Home Manager will generate a minimal
   # You can update Home Manager without changing this value. See
   # the Home Manager release notes for a list of state version
   # changes in each release.
-  home.stateVersion = "23.11";
+  home.stateVersion = "24.05";
 
   # Let Home Manager install and manage itself.
   programs.home-manager.enable = true;
@@ -65,7 +65,7 @@ follows:
   # You can update Home Manager without changing this value. See
   # the Home Manager release notes for a list of state version
   # changes in each release.
-  home.stateVersion = "23.11";
+  home.stateVersion = "24.05";
 
   # Let Home Manager install and manage itself.
   programs.home-manager.enable = true;

docs/release-notes/rl-2405.md

@@ -1,7 +1,6 @@
 # Release 24.05 {#sec-release-24.05}
 
-This is the current unstable branch and the information in this section
+The 24.05 release branch became stable in May, 2024.
-is therefore not final.
 
 ## Highlights {#sec-release-24.05-highlights}
 
@@ -89,4 +88,4 @@ The state version in this release includes the changes below. These
 changes are only active if the `home.stateVersion` option is set to
 \"24.05\" or later.
 
--   Nothing, yet.
+- There was no state version change in this release.

home-manager/home-manager

@@ -359,7 +359,7 @@ $xdgVars
   # You should not change this value, even if you update Home Manager. If you do
   # want to update the value, then make sure to first check the Home Manager
   # release notes.
-  home.stateVersion = "23.11"; # Please read the comment before changing.
+  home.stateVersion = "24.05"; # Please read the comment before changing.
 
   # The home.packages option allows you to install Nix packages into your
   # environment.
@@ -857,7 +857,7 @@ function doUninstall() {
   uninstall = true;
   home.username = "$USER";
   home.homeDirectory = "$HOME";
-  home.stateVersion = "23.11";
+  home.stateVersion = "24.05";
 }
 EOF
             # shellcheck disable=2064

modules/misc/uninstall.nix

@@ -21,7 +21,7 @@ in {
   config = mkIf config.uninstall {
     home.packages = lib.mkForce [ ];
     home.file = lib.mkForce { };
-    home.stateVersion = lib.mkForce "23.11";
+    home.stateVersion = lib.mkForce "24.05";
     home.enableNixpkgsReleaseCheck = lib.mkForce false;
     manual.manpages.enable = lib.mkForce false;
     news.display = lib.mkForce "silent";

tests/integration/nixos/basics.nix

@@ -15,7 +15,7 @@
     };
 
     home-manager.users.alice = { ... }: {
-      home.stateVersion = "23.11";
+      home.stateVersion = "24.05";
       home.file.test.text = "testfile";
       # Enable a light-weight systemd service.
       services.pueue.enable = true;

tests/integration/standalone/alice-home-init.nix

@@ -13,7 +13,7 @@
   # You should not change this value, even if you update Home Manager. If you do
   # want to update the value, then make sure to first check the Home Manager
   # release notes.
-  home.stateVersion = "23.11"; # Please read the comment before changing.
+  home.stateVersion = "24.05"; # Please read the comment before changing.
 
   # The home.packages option allows you to install Nix packages into your
   # environment.

tests/integration/standalone/alice-home-next.nix

@@ -3,7 +3,7 @@
 {
   home.username = "alice";
   home.homeDirectory = "/home/alice";
-  home.stateVersion = "23.11";
+  home.stateVersion = "24.05";
   home.packages = [ pkgs.hello ];
   home.file.test.text = "test";
   home.sessionVariables.EDITOR = "emacs";