From 104b771429c672e9c8dc7d29459147ebeffb0603 Mon Sep 17 00:00:00 2001
From: Aditya Patil <72488360+PythonHacker24@users.noreply.github.com>
Date: Thu, 4 Apr 2024 14:40:01 +0530
Subject: [PATCH 1/2] Update uart.md

Using Arduino UNO R3 (Non-SMD) with a quick hack to get UART connection.
---
 todo/hardware-hacking/uart.md | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/todo/hardware-hacking/uart.md b/todo/hardware-hacking/uart.md
index fe5fd92b2..df89e10bb 100644
--- a/todo/hardware-hacking/uart.md
+++ b/todo/hardware-hacking/uart.md
@@ -78,6 +78,14 @@ Configure the settings such as baudrate and device name in the `Serial port setu
 
 After configuration, use the command `minicom` to start get the UART Console.
 
+# UART Via Arduino UNO R3 (Remoable Atmel 328p Chip Boards)
+
+Incase UART Serial to USB adapters are not available, Arduino UNO R3 can be used with a quick hack. Since Arduino UNO R3 is usually available anywhere, this can save a lot of time. 
+
+Arduino UNO R3 has a USB to Serial adapter built on the board itself. To get UART connection, just plug out the Atmel 328p microcontroller chip from the board. This hack works on Arduino UNO R3 variants having the Atmel 328p not soldered on the board (SMD version is used in it). Connect the RX pin of Arduino (Digital Pin 0) to the TX pin of the UART Interface and TX pin of the Arduino (Digital Pin 1) to the RX pin of the UART interface. 
+
+Finally, it is recommended to use Arduino IDE to get the Serial Console. In the `tools` section in the menu, select `Serial Console` option and set the baud rate as per the UART interface. 
+
 # Bus Pirate
 
 In this scenario we are going to sniff the UART communication of the Arduino that is sending all the prints of the program to the Serial Monitor.

From b0c8188eef1960c6f1371bedddb468eca66ab9dc Mon Sep 17 00:00:00 2001
From: Aditya Patil <72488360+PythonHacker24@users.noreply.github.com>
Date: Thu, 4 Apr 2024 14:40:57 +0530
Subject: [PATCH 2/2] Update uart.md

Fixed Type in the heading
---
 todo/hardware-hacking/uart.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/todo/hardware-hacking/uart.md b/todo/hardware-hacking/uart.md
index df89e10bb..201cf2410 100644
--- a/todo/hardware-hacking/uart.md
+++ b/todo/hardware-hacking/uart.md
@@ -78,7 +78,7 @@ Configure the settings such as baudrate and device name in the `Serial port setu
 
 After configuration, use the command `minicom` to start get the UART Console.
 
-# UART Via Arduino UNO R3 (Remoable Atmel 328p Chip Boards)
+# UART Via Arduino UNO R3 (Removable Atmel 328p Chip Boards)
 
 Incase UART Serial to USB adapters are not available, Arduino UNO R3 can be used with a quick hack. Since Arduino UNO R3 is usually available anywhere, this can save a lot of time.