h4cker/virl_topologies/8.6.virl
2017-09-08 14:42:42 -04:00

1407 lines
41 KiB
XML

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.95" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.95/virl.xsd">
<extensions>
<entry key="AutoNetkit.infrastructure_only" type="Boolean">false</entry>
<entry key="management_network" type="String">flat</entry>
<entry key="AutoNetkit.enable_cdp" type="Boolean">true</entry>
<entry key="AutoNetkit.IGP" type="String">ospf</entry>
</extensions>
<node name="iosvl2-1" type="SIMPLE" subtype="IOSvL2" location="296,180">
<extensions>
<entry key="config" type="string">! IOSvL2 Config generated on 2017-08-27 23:10
! by autonetkit_0.23.5
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
vtp domain virl.lab
vtp mode transparent
!
vlan 2
name ank_vlan2
vlan 3
name ank_vlan3
!
!
!
!
cdp run
!
!
!
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
!
interface GigabitEthernet0/0
description OOB management
! Configured on launch
no switchport
vrf forwarding Mgmt-intf
no ip address
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-2
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to iosv-1
switchport access vlan 2
switchport mode access
no shutdown
!
interface GigabitEthernet0/3
description to kali-1
switchport access vlan 2
switchport mode access
no shutdown
!
interface GigabitEthernet1/0
description to iosv-2
switchport access vlan 2
switchport mode access
no shutdown
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet1/0"/>
<interface id="4" name="GigabitEthernet1/1"/>
</node>
<node name="iosvl2-2" type="SIMPLE" subtype="IOSvL2" location="520,177">
<extensions>
<entry key="config" type="string">! IOSvL2 Config generated on 2017-08-27 23:10
! by autonetkit_0.23.5
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-2
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
vtp domain virl.lab
vtp mode transparent
!
vlan 2
name ank_vlan2
vlan 3
name ank_vlan3
!
!
!
!
cdp run
!
!
!
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
!
interface GigabitEthernet0/0
description OOB management
! Configured on launch
no switchport
vrf forwarding Mgmt-intf
no ip address
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-1
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to iosv-1
switchport access vlan 3
switchport mode access
no shutdown
!
interface GigabitEthernet0/3
description to server-1
switchport access vlan 3
switchport mode access
no shutdown
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="kali-1" type="SIMPLE" subtype="kali" location="193,282">
<extensions>
<entry key="config" type="String">#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: kali-1
manage_etc_hosts: true
package_update: true
packages:
- quagga
bootcmd:
- ip route del default via 172.16.1.1
- ip route add default via 172.16.1.2
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config
- service ssh restart
- systemctl enable zebra ospfd
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.23.10
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/network/interfaces
owner: root:root
permissions: '0644'
content: |-
source-directory /etc/network/interfaces.d
auto eth0
iface eth0 inet dhcp
gateway 172.16.1.2
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
#!/bin/sh
ip route del default
ip route add default via 172.16.1.2
ip link set eth1 up
ip addr add 10.0.0.1/17 dev eth1
# Use routes from Quagga instead
#route add -host 192.168.0.1 gw 10.0.0.2 dev eth1
#route add -host 192.168.0.4 gw 10.0.0.2 dev eth1
#route add -net 10.0.0.0/17 gw 10.0.0.2 dev eth1
#route add -net 10.0.128.0/30 gw 10.0.0.2 dev eth1
#route add -host 192.168.0.1 gw 10.0.0.3 dev eth1
#route add -host 192.168.0.4 gw 10.0.0.3 dev eth1
#route add -net 10.0.0.0/17 gw 10.0.0.3 dev eth1
#route add -net 10.0.128.0/30 gw 10.0.0.3 dev eth1
exit 0
- path: /etc/network/interfaces.d/eth1
owner: root:root
permissions: '0644'
content: |-
iface eth1 inet manual
- path: /etc/quagga/zebra.conf
owner: root:root
permissions: '0644'
content: |-
hostname kali-1
password cisco
enable password cisco
interface eth0
interface eth1
line vty
- path: /etc/quagga/ospfd.conf
owner: root:root
permissions: '0644'
content: |-
hostname kali-1
password cisco
log stdout
interface eth1
ip ospf cost 1
router ospf
ospf router-id 10.0.0.1
network 10.0.0.1/17 area 0.0.0.0
network 192.168.0.4/32 area 0.0.0.0
network 10.0.128.2/32 area 0
line vty
- path: /root/get-cisco-config.py
owner: root:root
permissions: '0755'
content: |-
#!/usr/bin/env python
# See
# http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15217-copy-configs-snmp.html
# and
# http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&amp;mibName=CISCO-CONFIG-COPY-MIB
# for details
from optparse import OptionParser
from scapy.all import conf,IP,SNMP,SNMPset,ASN1_OID,ASN1_IPADDRESS,UDP,SNMPvarbind,send
parser = OptionParser()
parser.add_option("-i", "--iface", dest="iface", help="Interface",
default="eth1")
parser.add_option("-s", "--src", dest="srcip", help="Source IP Address",
default="192.168.1.2")
parser.add_option("-d", "--dst", dest="dstip", help="Destination IP Address",
default="192.168.1.1")
parser.add_option("-t", "--tftp", dest="tftpip", help="TFTP Server IP Address",
default="192.168.1.2")
parser.add_option("-f", "--cfg", dest="cfg_file", help="Configuration Filename")
parser.add_option("-c", "--community", dest="snmpstring",
help="SNMP Community Set String", default="secret")
(options, args) = parser.parse_args()
if options.cfg_file is None:
options.cfg_file = "%s-config" % (options.dstip)
print "Attempting to download IOS config from %s" % (options.dstip)
conf.iface = options.iface
i=IP(src=options.srcip,dst=options.dstip)/UDP(sport=161,dport=161)
s1=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyEntryRowStatus(14) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.14.112"),value=6)]
)
)
s2=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyProtocol(2) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.2.112"),value=1)]
)
)
s3=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopySourceFileType(3) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.3.112"),value=4)]
)
)
s4=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyDestFileType(4) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.4.112"),value=1)]
)
)
s5=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyServerAddress(5) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.5.112"),value=ASN1_IPADDRESS(options.tftpip))]
)
)
s6=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyFileName(6) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.6.112"),value=options.cfg_file)]
)
)
s7=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyEntryRowStatus(14) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.14.112"),value=1)]
)
)
send(i/s1)
send(i/s2)
send(i/s3)
send(i/s4)
send(i/s5)
send(i/s6)
send(i/s7)
- path: /root/merge-cisco-config.py
owner: root:root
permissions: '0755'
content: |-
#!/usr/bin/env python
# See
# http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15217-copy-configs-snmp.html
# and
# http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&amp;mibName=CISCO-CONFIG-COPY-MIB
# for details
from optparse import OptionParser
from scapy.all import conf,IP,SNMP,SNMPset,ASN1_OID,ASN1_IPADDRESS,UDP,SNMPvarbind,send
parser = OptionParser()
parser.add_option("-i", "--iface", dest="iface", help="Interface",
default="eth1")
parser.add_option("-s", "--src", dest="srcip", help="Source IP Address",
default="192.168.1.2")
parser.add_option("-d", "--dst", dest="dstip", help="Destination IP Address",
default="192.168.1.1")
parser.add_option("-t", "--tftp", dest="tftpip", help="TFTP Server IP Address",
default="192.168.1.2")
parser.add_option("-f", "--cfg", dest="cfg_file", help="Configuration Filename")
parser.add_option("-c", "--community", dest="snmpstring",
help="SNMP Community Set String", default="secret")
(options, args) = parser.parse_args()
if options.cfg_file is None:
options.cfg_file = "%s-config" % (options.dstip)
print "Attempting to upload IOS config to %s" % (options.dstip)
conf.iface = options.iface
i=IP(src=options.srcip,dst=options.dstip)/UDP(sport=161,dport=161)
s1=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyEntryRowStatus(14) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.14.112"),value=6)]
)
)
s2=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyProtocol(2) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.2.112"),value=1)]
)
)
s3=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopySourceFileType(3) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.3.112"),value=1)]
)
)
s4=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyDestFileType(4) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.4.112"),value=4)]
)
)
s5=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyServerAddress(5) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.5.112"),value=ASN1_IPADDRESS(options.tftpip))]
)
)
s6=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyFileName(6) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.6.112"),value=options.cfg_file)]
)
)
s7=SNMP(
community=options.snmpstring,
PDU=SNMPset(
# iso(1) identified-organization(3) dod(6) internet(1) private(4)
# enterprise(1) cisco (9) ciscoMgmt(9) ciscoConfigCopyMIB(96)
# ciscoConfigCopyMIBObjects(1) ccCopy(1) ccCopyTable(1) ccCopyEntry(1)
# ccCopyEntryRowStatus(14) RANDOM(112)
varbindlist=[SNMPvarbind(oid=ASN1_OID("1.3.6.1.4.1.9.9.96.1.1.1.1.14.112"),value=1)]
)
)
send(i/s1)
send(i/s2)
send(i/s3)
send(i/s4)
send(i/s5)
send(i/s6)
send(i/s7)
- path: /etc/default/atftpd
owner: root:root
permissions: '0644'
content: |-
USE_INETD=false
# OPTIONS below are used only with init script
OPTIONS="--tftpd-timeout 300 --retry-timeout 5 --mcast-port 1758 --mcast-addr 239.239.239.0-255 --mcast-ttl 1 --maxthread 100 --verbose=5 /srv/tftp"
- path: /srv/tftp/router.cfg
owner: nobody:nogroup
permissions: '0644'
content: |-
!
! Last configuration change at 23:19:07 UTC Tue Aug 29 2017 by cisco
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname iosv-2
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password 7 060506324F41
!
aaa new-model
!
!
aaa authentication login default group radius local line
aaa authorization exec default group radius if-authenticated
!
!
!
!
!
aaa session-id common
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$WaUX$blEhl/Fee6CSV8WMIvhv4.
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
ip address 192.168.0.4 255.255.255.255
!
interface GigabitEthernet0/0
description OOB Management
vrf forwarding Mgmt-intf
ip address 172.16.1.191 255.255.255.0
duplex full
speed auto
media-type rj45
!
interface GigabitEthernet0/1
description to iosvl2-1
ip address 10.0.0.3 255.255.128.0
ip ospf cost 1
duplex full
speed auto
media-type rj45
!
router ospf 1
passive-interface Loopback0
network 10.0.0.0 0.0.127.255 area 0
network 192.168.0.4 0.0.0.0 area 0
!
router bgp 1
bgp router-id 192.168.0.4
bgp log-neighbor-changes
neighbor 192.168.0.1 remote-as 1
neighbor 192.168.0.1 description iBGP peer iosv-1
neighbor 192.168.0.1 update-source Loopback0
!
address-family ipv4
network 192.168.0.4 mask 255.255.255.255
neighbor 192.168.0.1 activate
exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip ssh server algorithm authentication password
!
ip access-list standard IN-VTY
permit 172.16.1.0 0.0.0.255
permit 192.168.0.0 0.0.0.255
permit 10.0.128.0 0.0.0.255
ip access-list standard SNMP-RW
permit 172.16.1.0 0.0.0.255
permit 192.168.0.0 0.0.0.255
permit 10.0.128.0 0.0.0.3
!
ip radius source-interface Loopback0
!
snmp-server community supersecret RW SNMP-RW
snmp-server chassis-id
!
!
!
radius server RADIUS
address ipv4 10.0.128.2 auth-port 1812 acct-port 1813
key 7 13061E0108030723382727
!
!
control-plane
!
banner exec ^
**************************************************************************
* IOSv - Cisco Systems Confidential *
* *
* Supplemental End User License Restrictions *
* *
* This IOSv software is provided AS-IS without warranty of any kind. *
* Under no circumstances may this software be used separate from *
* the Cisco Modeling Labs Software that this software was provided *
* with, or deployed or used as part of a production environment. *
* *
* By using the software, you agree to abide by the terms and *
* conditions of the Cisco End User License Agreement at *
* http://www.cisco.com/go/eula. *
* *
* Unauthorized use or distribution of this software is expressly *
* prohibited. *
**************************************************************************
^
banner incoming ^
**************************************************************************
* IOSv - Cisco Systems Confidential *
* *
* Supplemental End User License Restrictions *
* *
* This IOSv software is provided AS-IS without warranty of any kind. *
* Under no circumstances may this software be used separate from *
* the Cisco Modeling Labs Software that this software was provided *
* with, or deployed or used as part of a production environment. *
* *
* By using the software, you agree to abide by the terms and *
* conditions of the Cisco End User License Agreement at *
* http://www.cisco.com/go/eula. *
* *
* Unauthorized use or distribution of this software is expressly *
* prohibited. *
**************************************************************************
^
banner login ^
**************************************************************************
* IOSv - Cisco Systems Confidential *
* *
* Supplemental End User License Restrictions *
* *
* This IOSv software is provided AS-IS without warranty of any kind. *
* Under no circumstances may this software be used separate from *
* the Cisco Modeling Labs Software that this software was provided *
* with, or deployed or used as part of a production environment. *
* *
* By using the software, you agree to abide by the terms and *
* conditions of the Cisco End User License Agreement at *
* http://www.cisco.com/go/eula. *
* *
* Unauthorized use or distribution of this software is expressly *
* prohibited. *
**************************************************************************
^
!
line con 0
password 7 0822455D0A16
line aux 0
line vty 0 4
exec-timeout 720 0
password 7 1511021F0725
transport input telnet ssh
!
no scheduler allocate
!
end
</entry>
</extensions>
<interface id="0" name="eth1" ipv4="10.0.0.1" netPrefixLenV4="17">
<extensions>
<entry key="AutoNetkit.vlan" type="Integer">2</entry>
</extensions>
</interface>
</node>
<node name="iosv-1" type="SIMPLE" subtype="IOSv" location="417,76" ipv4="192.168.0.1">
<extensions>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">! IOS Config generated on 2017-08-27 23:10
! by autonetkit_0.23.5
!
hostname iosv-1
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
no aaa new-model
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
!
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
ip domain name virl.info
crypto key generate rsa modulus 768
ip ssh server algorithm authentication password
username cisco privilege 15 secret cisco
ip access-list standard IN-VTY
permit 172.16.1.0 0.0.0.255
permit 192.168.0.0 0.0.0.255
permit 10.0.128.0 0.0.0.255
ip access-list standard SNMP-RW
permit 172.16.1.0 0.0.0.255
permit 192.168.0.0 0.0.0.255
permit 10.0.128.0 0.0.0.3
snmp-server community supersecret rw SNMP-RW
line vty 0 4
transport input ssh telnet
access-class IN-VTY in vrf-also
exec-timeout 720 0
password cisco
login local
line con 0
password cisco
!
cdp run
!
!
interface Loopback0
description Loopback
ip address 192.168.0.1 255.255.255.255
!
interface GigabitEthernet0/0
description OOB Management
vrf forwarding Mgmt-intf
! Configured on launch
no ip address
cdp enable
duplex full
speed auto
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-1
ip address 10.0.0.2 255.255.128.0
cdp enable
ip ospf cost 1
duplex full
speed auto
no shutdown
!
interface GigabitEthernet0/2
description to iosvl2-2
ip address 10.0.128.1 255.255.255.252
cdp enable
ip ospf cost 1
duplex full
speed auto
no shutdown
!
interface GigabitEthernet0/3
description to admin-1
ip address 10.0.128.5 255.255.255.252
cdp enable
ip ospf cost 1
duplex full
speed auto
no shutdown
!
!
!
router ospf 1
network 192.168.0.1 0.0.0.0 area 0
log-adjacency-changes
passive-interface Loopback0
network 10.0.0.0 0.0.127.255 area 0
network 10.0.128.0 0.0.0.3 area 0
network 10.0.128.4 0.0.0.3 area 0
!
!
router bgp 1
bgp router-id 192.168.0.1
no synchronization
! ibgp
! ibgp peers
!
neighbor 192.168.0.4 remote-as 1
neighbor 192.168.0.4 description iBGP peer iosv-2
neighbor 192.168.0.4 update-source Loopback0
!
!
!
address-family ipv4
network 192.168.0.1 mask 255.255.255.255
neighbor 192.168.0.4 activate
exit-address-family
!
!
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.2" netPrefixLenV4="17">
<extensions>
<entry key="AutoNetkit.vlan" type="Integer">2</entry>
</extensions>
</interface>
<interface id="1" name="GigabitEthernet0/2" ipv4="10.0.128.1" netPrefixLenV4="30">
<extensions>
<entry key="AutoNetkit.vlan" type="Integer">3</entry>
</extensions>
</interface>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="server-1" type="SIMPLE" subtype="server" location="592,287">
<extensions>
<entry key="config" type="String">#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: server-1
manage_etc_hosts: true
package_update: true
packages:
- snmp
- freeradius
- tshark
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
- cp /tmp/clients.conf.new /etc/freeradius/clients.conf
- cp /tmp/users.new /etc/freeradius/users
- systemctl enable freeradius
- systemctl start freeradius
- chown -R cisco:cisco /home/cisco
- sudo -u cisco /home/cisco/http-chatter.sh &amp;
- sudo -u cisco /home/cisco/snmp-chatter.sh &amp;
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.23.10
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
#!/bin/sh
ip route del default
ip route add default via 172.16.1.2
ifconfig eth1 up 10.0.128.2 netmask 255.255.255.252
route add -host 192.168.0.1 gw 10.0.128.1 dev eth1
route add -host 192.168.0.4 gw 10.0.128.1 dev eth1
route add -net 10.0.0.0/17 gw 10.0.128.1 dev eth1
route add -net 10.0.128.0/30 gw 10.0.128.1 dev eth1
exit 0
- path: /tmp/clients.conf.new
content: |
client 192.168.0.0/24 {
secret = ciscocisco
nastype = cisco
shortname = virl
}
owner: "root:root"
permissions: '0640'
- path: /tmp/users.new
content: |
admin Cleartext-Password := "secret123"
Service-Type = NAS-Prompt-User,
Cisco-AVPair = "shell:priv-lvl=15"
owner: "root:root"
permissions: '0640'
- path: /home/cisco/http-chatter.sh
content: |
#!/bin/bash
while true; do
curl -u admin:secret123 http://192.168.0.4
sleep 15
done
owner: "root:root"
permissions: '0755'
- path: /home/cisco/snmp-chatter.sh
content: |
#!/bin/bash
while true; do
snmpget -v 2c -c supersecret 192.168.0.4 1.3.6.1.2.1.1.1.0
sleep 15
done
owner: "root:root"
permissions: '0755'
</entry>
</extensions>
<interface id="0" name="eth1" ipv4="10.0.128.2" netPrefixLenV4="30">
<extensions>
<entry key="AutoNetkit.vlan" type="Integer">3</entry>
</extensions>
</interface>
</node>
<node name="iosv-2" type="SIMPLE" subtype="IOSv" location="370,291" ipv4="192.168.0.4">
<extensions>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">! IOS Config generated on 2017-08-27 23:10
! by autonetkit_0.23.5
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname iosv-2
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password 7 060506324F41
!
aaa new-model
!
!
aaa authentication login default group radius local line
aaa authorization exec default group radius if-authenticated
!
!
!
!
!
aaa session-id common
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$WaUX$blEhl/Fee6CSV8WMIvhv4.
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
ip address 192.168.0.4 255.255.255.255
!
interface GigabitEthernet0/0
description OOB Management
vrf forwarding Mgmt-intf
ip address 172.16.1.182 255.255.255.0
duplex full
speed auto
media-type rj45
!
interface GigabitEthernet0/1
description to iosvl2-1
ip address 10.0.0.3 255.255.128.0
ip ospf cost 1
duplex full
speed auto
media-type rj45
!
router ospf 1
passive-interface Loopback0
network 10.0.0.0 0.0.127.255 area 0
network 192.168.0.4 0.0.0.0 area 0
!
router bgp 1
bgp router-id 192.168.0.4
bgp log-neighbor-changes
neighbor 192.168.0.1 remote-as 1
neighbor 192.168.0.1 description iBGP peer iosv-1
neighbor 192.168.0.1 update-source Loopback0
!
address-family ipv4
network 192.168.0.4 mask 255.255.255.255
neighbor 192.168.0.1 activate
exit-address-family
!
ip forward-protocol nd
!
!
ip http server
ip http authentication aaa login-authentication default
no ip http secure-server
ip ssh server algorithm authentication password
!
ip access-list standard SNMP-RW
permit 172.16.1.0 0.0.0.255
permit 192.168.0.0 0.0.0.255
permit 10.0.128.0 0.0.0.3
!
ip radius source-interface Loopback0
!
snmp-server community supersecret RW SNMP-RW
snmp-server chassis-id
!
!
!
radius server RADIUS
address ipv4 10.0.128.2 auth-port 1812 acct-port 1813
key 7 13061E0108030723382727
!
!
control-plane
!
banner exec ^
**************************************************************************
* IOSv - Cisco Systems Confidential *
* *
* Supplemental End User License Restrictions *
* *
* This IOSv software is provided AS-IS without warranty of any kind. *
* Under no circumstances may this software be used separate from *
* the Cisco Modeling Labs Software that this software was provided *
* with, or deployed or used as part of a production environment. *
* *
* By using the software, you agree to abide by the terms and *
* conditions of the Cisco End User License Agreement at *
* http://www.cisco.com/go/eula. *
* *
* Unauthorized use or distribution of this software is expressly *
* prohibited. *
**************************************************************************
^
banner incoming ^
**************************************************************************
* IOSv - Cisco Systems Confidential *
* *
* Supplemental End User License Restrictions *
* *
* This IOSv software is provided AS-IS without warranty of any kind. *
* Under no circumstances may this software be used separate from *
* the Cisco Modeling Labs Software that this software was provided *
* with, or deployed or used as part of a production environment. *
* *
* By using the software, you agree to abide by the terms and *
* conditions of the Cisco End User License Agreement at *
* http://www.cisco.com/go/eula. *
* *
* Unauthorized use or distribution of this software is expressly *
* prohibited. *
**************************************************************************
^
banner login ^
**************************************************************************
* IOSv - Cisco Systems Confidential *
* *
* Supplemental End User License Restrictions *
* *
* This IOSv software is provided AS-IS without warranty of any kind. *
* Under no circumstances may this software be used separate from *
* the Cisco Modeling Labs Software that this software was provided *
* with, or deployed or used as part of a production environment. *
* *
* By using the software, you agree to abide by the terms and *
* conditions of the Cisco End User License Agreement at *
* http://www.cisco.com/go/eula. *
* *
* Unauthorized use or distribution of this software is expressly *
* prohibited. *
**************************************************************************
^
!
line con 0
password 7 0822455D0A16
line aux 0
line vty 0 4
exec-timeout 720 0
password 7 1511021F0725
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.3" netPrefixLenV4="17">
<extensions>
<entry key="AutoNetkit.vlan" type="Integer">2</entry>
</extensions>
</interface>
</node>
<node name="admin-1" type="SIMPLE" subtype="lxc" location="605,72">
<extensions>
<entry key="config" type="String">#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: admin-1
manage_etc_hosts: true
runcmd:
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.23.10
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
#!/bin/sh
ifconfig eth1 up 10.0.128.6 netmask 255.255.255.252
route add -host 192.168.0.1 gw 10.0.128.5 dev eth1
route add -host 192.168.0.4 gw 10.0.128.5 dev eth1
route add -net 10.0.0.0/16 gw 10.0.128.5 dev eth1
route add -host 192.168.0.1 gw 10.0.128.5 dev eth1
route add -host 192.168.0.4 gw 10.0.128.5 dev eth1
exit 0
</entry>
</extensions>
<interface id="0" name="eth1"/>
</node>
<annotations/>
<connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[1]/virl:interface[2]" src="/virl:topology/virl:node[4]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[4]/virl:interface[2]" src="/virl:topology/virl:node[2]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[1]/virl:interface[3]" src="/virl:topology/virl:node[3]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[2]/virl:interface[3]" src="/virl:topology/virl:node[5]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[6]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[4]"/>
<connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[3]"/>
</topology>