Create UFW_cheat_sheet.md

This commit is contained in:
Omar Santos 2023-01-08 13:43:52 -05:00 committed by GitHub
parent 8033241d09
commit 08fceb6105
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -0,0 +1,226 @@
# UFW: Uncomplicated Firewall — Cheat Sheet
## Installation
If you are using Ubuntu then UFW will be installed by default. If you are using Debian or a derivative, then you can install UFW by entering the following
```
root@host:~# apt-get install ufw
```
UFW is not available in CentOS, and although you can install it from source, that is outside the scope of this tutorial.
## Checking status
When you check the status, UFW will either tell you that it is inactive,
```
root@host:~# ufw status
Status: inactive
```
or it will tell you it is active and list the firewall rules.
```
root@host:~# ufw status
Status: active
To Action From
-- ------ ----
22/tcp ALLOW Anywhere
22/tcp (v6) ALLOW Anywhere (v6)
```
Rules can also be numbered, which is particularly useful when you wish to delete one.
```
root@host:~# ufw status numbered
Status: active
To Action From -- ------ ----
[ 1] WWW Full ALLOW IN Anywhere
[ 2] WWW Full (v6) ALLOW IN Anywhere (v6)
```
Not that if you have no rules enables, you will just be told it is active
```
root@host:~# ufw status
Status: active
```
## Enable and disable
Enabling and disabling are from the following commands. Warning; if you are working on a remote system, allow the SSH rule before you enable UFW or you risk losing your shell access.
```
root@host:~# ufw enable
Firewall is active and enabled on system startup
root@host:~# ufw disable
Firewall stopped and disabled on system startup
```
## Deleting rules
The easiest way to delete a rule is to delete it by number, but you can also delete it by definition.
```
root@host:~# ufw status numbered
Status: active
To Action From -- ------ ----
[ 1] 22/tcp ALLOW IN Anywhere
[ 2] 22/tcp (v6) ALLOW IN Anywhere (v6)
```
Note that as there are 2 rules (ipv4 and ipv6) for every pre-defined service, delete will only remove the rule for one protocol.
```
root@host:~# ufw delete 2
Deleting:
allow 22/tcp
Proceed with operation (y|n)? y
Rule deleted (v6)
```
## Logging
Logging is on by default, but can rapidly fill your log files with noise. Enable and disable thusly
```
root@host:~# ufw logging on
Logging enabled
root@host:~# ufw logging off
Logging disabled
```
You can also change the logging levels if necessary, but low is the default.
```
root@host:~# ufw logging medium
Logging enabled
Pre-defined rules
```
One of the strengths for sysadmins who may only infrequently change firewall rules is the set of pre-defined rules that UFW ships with. These obviously assume that you are running services on default ports and will NOT work if you have tried to obfuscate by assigning non-default ports. They also assume you will be allowing ALL traffic to these port (see later for how to restrict traffic sources and destinations.
```
root@host:~# ufw app list
Available applications:
AIM
Bonjour
CIFS
CUPS
DNS
Deluge
IMAP
IMAPS
IPP
KTorrent
Kerberos Admin
Kerberos Full
Kerberos KDC
Kerberos Password
LDAP
LDAPS
LPD
MSN
MSN SSL
Mail submission
NFS
POP3
POP3S
PeopleNearby
SMTP
SSH
Socks
Telnet
Transmission
Transparent Proxy
VNC
WWW
WWW Cache
WWW Full
WWW Secure
XMPP
Yahoo
qBittorrent
svnserve
```
You can see a full list of these and their definitions in /etc/ufw/applications.d.
## SSH
If you are running a remote server, you almost certainly want this rule enabled.
```
root@host:~# ufw allow ssh
Rule added
Rule added (v6)
root@host:~# ufw status
Status: active
To Action From
-- ------ ----
22/tcp ALLOW Anywhere
22/tcp (v6) ALLOW Anywhere (v6)
http(s)
```
You can enable both port 80 (http) and 443 (https) in one go with the following command, but there are options to only enable one
```
root@host:~# ufw allow www\ full
Rules updated
Rules updated (v6)
root@host:~# ufw status
[sudo] password for simon:
Status: active
To Action From
-- ------ ----
WWW Full ALLOW Anywhere
WWW Full (v6) ALLOW Anywhere (v6)
```
## More complex usage
Port and protocol
```
root@host:~# ufw allow 45/tcp
Rule added
Rule added (v6)
```
### Source and Destination
Allow only from an IP
```
root@host:~# ufw allow from 192.168.1.1 port 62
Rule added
root@host:~# ufw status
Status: active
To Action From
-- ------ ----
Anywhere ALLOW 192.168.1.1 62
```
Allow only to a certain local interface
```
root@host:~# ufw allow to 127.0.0.2 port 62
Rule added
root@host:~# ufw status
Status: active
To Action From
-- ------ ----
127.0.0.2 62 ALLOW Anywhere
```
### Protocol only
If you have followed my ipsec tutorial, you will need the firewall ports open to establish the key exchange this is one of the few protolcols which do not require a port number.
```
root@host:~# ufw allow to 127.0.0.3 proto esp
Rule added
root@host:~# ufw allow to 127.0.0.3 proto ah
Rule added
root@host:~# ufw status
Status: active
To Action From
-- ------ ----
127.0.0.3/esp ALLOW Anywhere
127.0.0.3/ah ALLOW Anywhere
```
Note that you need a destination in this instance.