fish-shell/share/completions/cdrecord.fish
2010-09-18 10:18:26 +08:00

92 lines
9.2 KiB
Fish

#
# Completions for Cdrecord
#
complete -c cdrecord -o version --description "Display version and exit"
complete -c cdrecord -s v --description "Increment the level of general verbosity by one"
complete -c cdrecord -s V --description "Increment the verbose level in respect of SCSI command transport by one"
complete -c cdrecord -a "debug={1,2,3,4,5}" --description "Set the misc debug value to #"
complete -c cdrecord -s d --description "Increment the misc debug level by one" -a "1 2 3 4 5"
complete -c cdrecord -s s -o silent --description "Do not print out a status report for failed SCSI commands"
complete -c cdrecord -o force --description "Force to continue on some errors"
complete -c cdrecord -o immed --description "Tell cdrecord to set the SCSI IMMED flag in certain commands"
complete -c cdrecord -a "minbuf={25,35,45,55,65,75,85,95}" --description "Defines the minimum drive buffer fill ratio for the experimental ATAPI wait mode intended to free the IDE bus to allow hard disk and CD/DVD writer on the same IDE cable"
complete -c cdrecord -o dummy --description "Complete CD/DVD-Recorder recording process with the laser turned off"
complete -c cdrecord -o clone --description "Tells cdrecord to handle images created by readcd -clone"
complete -c cdrecord -o dao
complete -c cdrecord -o sao --description "Set SAO (Session At Once) mode, usually called Disk At Once mode"
complete -c cdrecord -o tao --description "Set TAO (Track At Once) writing mode"
complete -c cdrecord -o raw --description "Set RAW writing mode"
complete -c cdrecord -o raw96r --description "Select Set RAW writing, the preferred raw writing mode"
complete -c cdrecord -o raw96p --description "Select Set RAW writing, the less preferred raw writing mode"
complete -c cdrecord -o raw16 --description "Select Set RAW writing, the preferred raw writing mode if raw96r is not supported"
complete -c cdrecord -o multi --description "Allow multi session CDs to be made"
complete -c cdrecord -o msinfo --description "Retrieve multi session info in a form suitable for mkisofs-1.10 or later"
complete -c cdrecord -o toc --description "Retrieve and print out the table of content or PMA of a CD"
complete -c cdrecord -o atip --description "Retrieve and print out the ATIP (absolute Time in Pre-groove) info"
complete -c cdrecord -o fix --description "The disk will only be fixated"
complete -c cdrecord -o nofix --description "Do not fixate the disk after writing the tracks"
complete -c cdrecord -o waiti --description "Wait for input to become available on standard input before trying to open the SCSI driver"
complete -c cdrecord -o load --description "Load the media and exit"
complete -c cdrecord -o lock --description "Load the media, lock the door and exit"
complete -c cdrecord -o eject --description "Eject disk after doing the work"
complete -c cdrecord -a "speed={0,150,172,1385}" --description "Set the speed factor of the writing process to #"
complete -c cdrecord -a "blank={help,all,fast,track,unreserve,trtail,unclose,session}" --description "Blank a CD-RW and exit or blank a CD-RW before writing"
complete -c cdrecord -o format --description "Format a CD-RW/DVD-RW/DVD+RW disc"
complete -c cdrecord -a "fs=" --description "Set the FIFO (ring buffer) size to #"
complete -c cdrecord -a "ts=" --description "Set the maximum transfer size for a single SCSI command to #"
complete -c cdrecord -a "dev=" --description "Sets the SCSI target for the CD/DVD-Recorder"
complete -c cdrecord -a "gracetime=" --description "Set the grace time before starting to write to ># seconds"
complete -c cdrecord -a "timeout=" --description "Set the default SCSI command timeout value to # seconds"
complete -c cdrecord -a "driver={help,mmc_cd,mmc_cd_dvd,mmc_cdr,mmc_cdr_sony,mmc_dvd,mmc_dvdplus,mmc_dvdplusr,mmc_dvdplusrw,cw_7501,kodak_pcd_600,philips_cdd521,philips_cdd521_old,philips_cdd522,philips_dumb,pioneer_dws114x,plasmon_rf4100,ricoh_ro1060c,ricoh_ro1420c,scsi2_cd,sony_cdu924,teac_cdr50,tyuden_ew50,yamaha_cdr100,cdr_simul,dvd_simul}" --description "Allows the user to manually select a driver for the device"
# TODO: This argument accepts a comma separated list of arguments
complete -c cdrecord -a "driveropts=" --description "Set driver specific options"
complete -c cdrecord -o setdropts --description "Set the driveropts specified by driveropts=option list, the speed of the drive and the dummy flag and exit"
complete -c cdrecord -o checkdrive --description "Checks if a driver for the current drive is present and exit"
complete -c cdrecord -o prcap --description "Print the drive capabilities for SCSI-3/mmc compliant drives as obtained from mode page 0x2A"
complete -c cdrecord -o inq --description "Do an inquiry for the drive, print the inquiry info and exit"
complete -c cdrecord -o scanbus --description "Scan all SCSI devices on all SCSI busses and print the inquiry strings"
complete -c cdrecord -o reset --description "Try to reset the SCSI bus where the CD recorder is located"
complete -c cdrecord -o abort --description "Try to send an abort sequence to the drive"
complete -c cdrecord -o overburn --description "Allow cdrecord to write more than the official size of a medium"
complete -c cdrecord -o ignsize --description "Ignore the known size of the medium, use for debugging only"
complete -c cdrecord -o useinfo --description "Use *.inf files to overwrite audio options"
complete -c cdrecord -a "defpregap=" --description "Set the default pre-gap size for all tracks except track nr 1"
complete -c cdrecord -o packet --description "Set Packet writing mode (experimental interface)"
complete -c cdrecord -a "pktsize=" --description "Set the packet size to #, forces fixed packet mode (experimental)"
complete -c cdrecord -o noclose --description "Do not close the current track, only when in packet writing mode (experimental)"
complete -c cdrecord -a "mcn=" --description "Set the Media Catalog Number of the CD"
complete -c cdrecord -o text --description "Write CD-Text info based on info taken from a file that contains ascii info for the text strings"
complete -c cdrecord -a "textfile=" --description "Write CD-Text based on info found in the binary file filename"
complete -c cdrecord -a "cuefile=" --description "Take all recording related info from a CDRWIN compliant CUE sheet file"
# These completions are TRACK OPTIONS
complete -c cdrecord -a "isrc=" --description "Set the International Standard Recording Number for the next track"
complete -c cdrecord -a "index=" --description "Sets an index list for the next track"
complete -c cdrecord -o audio --description "All subsequent tracks are written in CD-DA audio format"
complete -c cdrecord -o swab --description "Audio data is assumed to be in byte-swapped (little-endian) order"
complete -c cdrecord -o data --description "All subsequent tracks are written in CD-ROM mode 1 (Yellow Book) format"
complete -c cdrecord -o mode2 --description "All subsequent tracks are written in CD-ROM mode 2 format"
complete -c cdrecord -o xa --description "All subsequent tracks are written in CD-ROM XA mode 2 form 1 format"
complete -c cdrecord -o xa1 --description "All subsequent tracks are written in CD-ROM XA mode 2 form 1 format"
complete -c cdrecord -o xa2 --description "All subsequent tracks are written in CD-ROM XA mode 2 form 2 format"
complete -c cdrecord -o xamix --description "All subsequent tracks are written in a way that allows a mix of CD-ROM XA mode 2 form 1/2 format"
complete -c cdrecord -o cdi --description "The TOC type for the disk is set to CDI, with XA only"
complete -c cdrecord -o isosize --description "Use the ISO-9660 file system size as the size of the next track"
complete -c cdrecord -o pad --description "15 sectors of zeroed data will be added to the end of this and each subsequent data track"
complete -c cdrecord -a "padsize=" --description "Set the amount of data to be appended as padding to the next track"
complete -c cdrecord -o nopad --description "Do not pad the following tracks - the default"
complete -c cdrecord -o shorttrack --description "Allow all subsequent tracks to violate the Red Book track length standard (min 4 s)"
complete -c cdrecord -o noshorttrack --description "Re-enforce the Red Book track length standard (min 4 s)"
complete -c cdrecord -a "pregap=" --description "Set the pre-gap size for the next track"
complete -c cdrecord -o preemp --description "All TOC entries for subsequent audio tracks will indicate that the audio data has been sampled with 50/15 microsec pre-emphasis"
complete -c cdrecord -o nopreemp --description "All TOC entries for subsequent audio tracks will indicate that the audio data has been mastered with linear data"
complete -c cdrecord -o copy --description "All TOC entries for subsequent audio tracks of the resulting CD will indicate that the audio data has permission to be copied without limit"
complete -c cdrecord -o nocopy --description "All TOC entries for subsequent audio tracks of the resulting CD will indicate that the audio data has permission to be copied only once for personal use"
complete -c cdrecord -o scms --description "All TOC entries for subsequent audio tracks of the resulting CD will indicate that the audio data has no permission to be copied"
complete -c cdrecord -a "tsize=" --description "If the master image for the next track has been stored on a raw disk, use this option to specify the valid amount of data on this disk"