This adopts the Rust postfork code, bridging it from C++ exec module.
We use direct function calls for the bridge, rather than cxx/autocxx, so that we
can be sure that no memory allocations or other shenanigans are happening.
- Add test to verify piped string replace exit code
Ensure fields parsing error messages are the same.
Note: C++ relied upon the value of the parsed value even when `errno` was set,
that is defined behaviour we should not rely on, and cannot easilt be replicated from Rust.
Therefore the Rust version will change the following error behaviour from:
```shell
> string split --fields=a "" abc
string split: Invalid fields value 'a'
> string split --fields=1a "" abc
string split: 1a: invalid integer
```
To:
```shell
> string split --fields=a "" abc
string split: a: invalid integer
> string split --fields=1a "" abc
string split: 1a: invalid integer
```
This adopts the new function store, replacing the C++ version.
It also reimplements builtin_function in Rust, as these was too coupled to
the function store to handle in a separate commit.
Note this is slightly incomplete - the FD is not moved into the parser, and so
will be freed at the end of each directory change. The FD saved in the parser is
never actually used in existing code, so this doesn't break anything, but will
need to be corrected once the parser is ported.
This allows the rust code to free up C++ resources allocated for a callback even
when the callback isn't executed (as opposed to requiring the callback to run
and at the end of the callback cleaning up all allocated resources).
Also add type-erased destructor registration to callback_t. This allows for
freeing variables allocated by the callback for debounce_t's
perform_with_callback() that don't end up having their completion called due to
a timeout.
The translation is fairly direct though it adds some duplication, for example
there are multiple "match" statements that mimic function overloading.
Rust has no overloading, and we cannot have generic methods in the Node trait
(due to a Rust limitation, the error is like "cannot be made into an object")
so we include the type name in method names.
Give clients like "indent_visitor_t" a Rust companion ("IndentVisitor")
that takes care of the AST traversal while the AST consumption remains
in C++ for now. In future, "IndentVisitor" should absorb the entirety of
"indent_visitor_t". This pattern requires that "fish_indent" be exposed
includable header to the CXX bridge.
Alternatively, we could define FFI wrappers for recursive AST traversal.
Rust requires we separate the AST visitors for "mut" and "const"
scenarios. Take this opportunity to concretize both visitors:
The only client that requires mutable access is the populator. To match the
structure of the C++ populator which makes heavy use of function overloading,
we need to add a bunch of functions to the trait. Since there is no other
mutable visit, this seems acceptable.
The "const" visitors never use "will_visit_fields_of()" or
"did_visit_fields_of()", so remove them (though this is debatable).
Like in the C++ implementation, the AST nodes themselves are largely defined
via macros. Union fields like "Statement" and "ArgumentOrRedirection"
do currently not use macros but may in future.
This commit also introduces a precedent for a type that is defined in one
CXX bridge and used in another one - "ParseErrorList". To make this work
we need to manually define "ExternType".
There is one annoyance with CXX: functions that take explicit lifetime
parameters require to be marked as unsafe. This makes little sense
because functions that return `&Foo` with implicit lifetime can be
misused the same way on the C++ side.
One notable change is that we cannot directly port "find_block_open_keyword()"
(which is used to compute an error) because it relies on the stack of visited
nodes. We cannot modify a stack of node references while we do the "mut"
walk. Happily, an idiomatic solution is easy: we can tell the AST visitor
to backtrack to the parent node and create the error there.
Since "node_t::accept_base" is no longer a template we don't need the
"node_visitation_t" trampoline anymore.
The added copying at the FFI boundary makes things slower (memcpy dominates
the profile) but it's not unusable, which is good news:
$ hyperfine ./fish.{old,new}" -c 'source ../share/completions/git.fish'"
Benchmark 1: ./fish.old -c 'source ../share/completions/git.fish'
Time (mean ± σ): 195.5 ms ± 2.9 ms [User: 190.1 ms, System: 4.4 ms]
Range (min … max): 193.2 ms … 205.1 ms 15 runs
Benchmark 2: ./fish.new -c 'source ../share/completions/git.fish'
Time (mean ± σ): 677.5 ms ± 62.0 ms [User: 665.4 ms, System: 10.0 ms]
Range (min … max): 611.7 ms … 805.5 ms 10 runs
Summary
'./fish.old -c 'source ../share/completions/git.fish'' ran
3.47 ± 0.32 times faster than './fish.new -c 'source ../share/completions/git.fish''
Leftovers:
- Enum variants are still snakecase; I didn't get around to changing this yet.
- "ast_type_to_string()" still returns a snakecase name. This could be
changed since it's not user visible.
This is basically a subset of type, so we might as well.
To be clear this is `command -s` and friends, if you do `command grep` that's
handled as a keyword.
One issue here is that we can't get "one path or not" because I don't
know how to translate a maybe_t? Do we need to make it a shared_ptr instead?
More ugliness with types that cxx bridge can't recognize as being POD. Using
pointers to get/set `termios` values with an assert to make sure we're using
identical definitions on both sides (in cpp from the system headers and in rust
from the libc crate as exported).
I don't know why cxx bridge doesn't allow `SharedPtr<OpaqueRustType>` but we can
work around it in C++ by converting a `Box<T>` to a `shared_ptr<T>` then convert
it back when it needs to be destructed. I can't find a clean way of doing it
from the cxx bridge wrapper so for now it needs to be done manually in the C++
code.
Types/values that are drop-in ready over ffi are renamed to match the old cpp
names but for types that now differ due to ffi difficulties I've left the `_ffi`
in the function names to indicate that this isn't the "correct" way of using the
types/methods.
I needed to rename some types already ported to rust so they don't clash with
their still-extant cpp counterparts. Helper ffi functions added to avoid needing
to dynamically allocate an FdMonitorItem for every fd (we use dozens per basic
prompt).
I ported some functions from cpp to rust that are used only in the backend but
without removing their existing cpp counterparts so cpp code can continue to use
their version of them (`wperror` and `make_detached_pthread`).
I ran into issues porting line-by-line logic because rust inverts the behavior
of `std::remove_if(..)` by making it (basically) `Vec::retain_if(..)` so I
replaced bools with an explict enum to make everything clearer.
I'll port the cpp tests for this separately, for now they're using ffi.
Porting closures was ugly. It's nothing hard, but it's very ugly as now each
capturing lambda has been changed into an explicit struct that contains its
parameters (that needs to be dynamically allocated), a standalone callback
(member) function to replace the lambda contents, and a separate trampoline
function to call it from rust over the shared C abi (not really relevant to
x86_64 w/ its single calling convention but probably needed on other platforms).
I don't like that `fd_monitor.rs` has its own `c_void`. I couldn't find a way to
move that to `ffi.rs` but still get cxx bridge to consider it a shared POD.
Every time I moved it to a different module, it would consider it to be an
opaque rust type instead. I worry this means we're going to have multiple
`c_void1`, `c_void2`, etc. types as we continue to port code to use function
pointers.
Also, rust treats raw pointers as foreign so you can't do `impl Send for * const
Foo` even if `Foo` is from the same module. That necessitated a wrapper type
(`void_ptr`) that implements `Send` and `Sync` so we can move stuff between
threads.
The code in fd_monitor_t has been split into two objects, one that is used by
the caller and a separate one associated with the background thread (this is
made nice and clean by rust's ownership model). Objects not needed under the
lock (i.e. accessed by the background thread exclusively) were moved to the
separate `BackgroundFdMonitor` type.
This is early work but I guess there's no harm in pushing it?
Some thoughts on the conventions:
Types that live only inside Rust follow Rust naming convention
("FeatureMetadata").
Types that live on both sides of the language boundary follow the existing
naming ("feature_flag_t").
The alternative is to define a type alias ("using feature_flag_t =
rust::FeatureFlag") but that doesn't seem to be supported in "[cxx::bridge]"
blocks. We could put it in a header ("future_feature_flags.h").
"feature_metadata_t" is a variant of "FeatureMetadata" that can cross
the language boundary. This has the advantage that we can avoid tainting
"FeatureMetadata" with "CxxString" and such. This is an experimental approach,
probably not what we should do in general.
The original implementation without the test took me 3 hours (first time
seriously looking into this)
The functions take "wcharz_t" for smooth integration with existing C++ callers.
This is at the expense of Rust callers, which would prefer "&wstr". Would be
nice to declare a function parameter that accepts both but I don't think
that really works since "wcharz_t" drops the lifetime annotation.
Prior to this change, abbreviations were stored as fish variables, often
universal. However we intend to add additional features to abbreviations
which would be very awkward to shoe-horn into variables.
Re-implement abbreviations using a builtin, managing them internally.
Existing abbreviations stored in universal variables are still imported,
for compatibility. However new abbreviations will need to be added to a
function. A follow-up commit will add it.
Now that abbr is a built-in, remove the abbr function; but leave the
abbr.fish file so that stale files from past installs do not override
the abbr builtin.
This adds preprocessor defines for _LARGEFILE_SOURCE and
_FILE_OFFSET_BITS=64 and a few others, fixing a bug that was reported on
gitter. This prevents issues when running fish on 32 bit systems that
have filesystems with 64 bit inodes.
Intern'd strings were intended to be "shared" to reduce memory usage but
this optimization doesn't carry its weight. Remove it. No functional
change expected.
This migrates our PCRE2 dependency from builtin/string.cpp to new files
re.h/re.cpp, allowing regexes to be used in other places in fish.
No user-visible behavior change expected here.
This adds a "path" builtin that can handle paths.
Implemented so far:
- "path filter PATHS", filters paths according to existence and optionally type and permissions
- "path base" and "path dir", run basename and dirname, respectively
- "path extension PATHS", prints the extension, if any
- "path strip-extension", prints the path without the extension
- "path normalize PATHS", normalizes paths - removing "/./" components
- and such.
- "path real", does realpath - i.e. normalizing *and* link resolution.
Some of these - base, dir, {strip-,}extension and normalize operate on the paths only as strings, so they handle nonexistent paths. filter and real ignore any nonexistent paths.
All output is split explicitly, so paths with newlines in them are
handled correctly. Alternatively, all subcommands have a "--null-input"/"-z" and "--null-output"/"-Z" option to handle null-terminated input and create null-terminated output. So
find . -print0 | path base -z
prints the basename of all files in the current directory,
recursively.
With "-Z" it also prints it null-separated.
(if stdout is going to a command substitution, we probably want to
skip this)
All subcommands also have a "-q"/"--quiet" flag that tells them to skip output. They return true "when something happened". For match/filter that's when a file passed, for "base"/"dir"/"extension"/"strip-extension" that's when something about the path *changed*.
Filtering
---------
`filter` supports all the file*types* `test` has - "dir", "file", "link", "block"..., as well as the permissions - "read", "write", "exec" and things like "suid".
It is missing the tty check and the check for the file being non-empty. The former is best done via `isatty`, the latter I don't think I've ever seen used.
There currently is no way to only get "real" files, i.e. ignore links pointing to files.
Examples
--------
> path real /bin///sh
/usr/bin/bash
> path extension foo.mp4
mp4
> path extension ~/.config
(nothing, because ".config" isn't an extension.)
