It looks like the last status already contains the signal that cancelled
execution.
Also make `fish -c something` always return the last exit status of
"something", instead of hardcoded 127 if exited or signalled.
Fixes#6444
This was previously required so that, if there was a redirection to a
file, we would fork a process to create the file even if there was no
output. For example `echo -n >/tmp/file.txt` would have to create
file.txt even though it would be empty.
However now we open the file before fork, so we no longer need special
logic around this.
user_supplied was used to distinguish IO redirections which were
explicit, vs those that came about through "transmogrphication." But
transmogrification is no more. Remove the flag.
Previously, if the user control-C'd out of a process, we would set a
bogus exit status in the process, but it was difficult to observe this
because we would be cancelling anyways. But set it properly.
parser_t::eval indicates whether there was a parse error. It can be
easily confused with the status of the execution. Use a real type to
make it more clear.
This adds a test for the obscure case where an fd is redirected to
itself. This is tricky because the dup2 will not clear the CLO_EXEC bit.
So do it manually; also posix_spawn can't be used in this case.
Prior to this fix, a file redirection was turned into an io_file_t. This is
annoying because every place where we want to apply the redirection, we
might fail due to open() failing. Switch to opening the file at the point
we resolve the redirection spec. This will simplify a lot of code.
Prior to this change, a process after it has been constructed by
parse_execution, but before it is executed, was given a list of
io_data_t redirections. The problem is that redirections have a
sensitive ownership policy because they hold onto fds. This made it
rather hard to reason about fd lifetime.
Change these to redirection_spec_t. This is a textual description
of a redirection after expansion. It does not represent an open file and
so its lifetime is no longer important.
This enables files to be held only on the stack, and are no longer owned
by a process of indeterminate lifetime.
fish has to ensure that the pipes it creates do not conflict with any
explicit fds named in redirections. Switch this code to using
autoclose_fd_t to make the ownership logic more explicit, and also
introduce fd_set_t to reduce the dependence on io_chain_t.
Prior to this fix, a job would hold onto any IO redirections from its
parent. For example:
begin
echo a
end < file.txt
The "echo a" job would hold a reference to the I/O redirection.
The problem is that jobs then extend the life of pipes until the job is
cleaned up. This can prevent pipes from closing, leading to hangs.
Fix this by not storing the block IO; this ensures that jobs do not
prolong the life of pipes.
Fixes#6397
Currently a job needs to know three things about its "parents:"
1. Any IO redirections for the block or function containing this job
2. The pgid for the parent job
3. Whether the parent job has been fully constructed (to defer self-disown)
These are all tracked in somewhat separate awkward ways. Collapse them
into a single new type job_lineage_t.
In preparation for concurrent execution, invert the control of function and
block execution. Allow a process to return an std::function that performs the
the execution. This can be run on either the main or a background thread
(eventually).
This adds initial support for statements with prefixed variable assignments.
Statments like this are supported:
a=1 b=$a echo $b # outputs 1
Just like in other shells, the left-hand side of each assignment must
be a valid variable identifier (no quoting/escaping). Array indexing
(PATH[1]=/bin ls $PATH) is *not* yet supported, but can be added fairly
easily.
The right hand side may be any valid string token, like a command
substitution, or a brace expansion.
Since `a=* foo` is equivalent to `begin set -lx a *; foo; end`,
the assignment, like `set`, uses nullglob behavior, e.g. below command
can safely be used to check if a directory is empty.
x=/nothing/{,.}* test (count $x) -eq 0
Generic file completion is done after the equal sign, so for example
pressing tab after something like `HOME=/` completes files in the
root directory
Subcommand completion works, so something like
`GIT_DIR=repo.git and command git ` correctly calls git completions
(but the git completion does not use the variable as of now).
The variable assignment is highlighted like an argument.
Closes#6048
This adds support for `fish_trace`, a new variable intended to serve the
same purpose as `set -x` as in bash. Setting this variable to anything
non-empty causes execution to be traced. In the future we may give more
specific meaning to the value of the variable.
The user's prompt is not traced unless you run it explicitly. Events are
also not traced because it is noisy; however autoloading is.
Fixes#3427
Soon we will have more complicated logic around whether to call tcsetpgrp.
Prepare to centralize the logic by passing in the new term owner pgrp,
instead of having child_setup_process perform the decision.
When executing a job, if the first process is fish internal, then have
fish claim the job's pgroup.
The idea here is that the terminal must be owned by a pgroup containing
the process reading from the terminal. If the first process is fish
internal (a function or builtin) then the pgroup must contain the fish
process.
This is a bit of a workaround of the behavior where the first process that
executes in a job becomes the process group leader. If there's a deferred
process, then we will execute processes out of order so the pgroup can be
wrong. Fix this by setting the process group leader explicitly as fish
when necessary.
Fixes#5855
25afc9b377 made this unnecessary by
having child processes wait for a signal after fork(), but this change
was later reverted. If we artificially slow down fish (e.g. with a sleep)
after the fork call, we see commands getting backgrounded by mistake.
Put back the tcsetgrp() call.
Prior to this fix, a function_block stored a process_t, which was only used
when printing backtraces. Switch this to an array of arguments, and make
various other cleanups around null terminated argument arrays.
This runs build_tools/style.fish, which runs clang-format on C++, fish_indent on fish and (new) black on python.
If anything is wrong with the formatting, we should fix the tools, but automated formatting is worth it.
Prior to this change, fish used a global flag to decide if we should check
for changes to universal variables. This flag was then checked at arbitrary
locations, potentially triggering variable updates and event handlers for
those updates; this was very hard to reason about.
Switch to triggering a universal variable update at a fixed location,
after running an external command. The common case is that the variable
file has not changed, which we can identify with just a stat() call, so
this is pretty cheap.
This reverts commit cdce8511a1.
This change was unsafe. The prior version (now restored) took the lock and
then copied the data. By returning a reference, the caller holds a
reference to data outside of the lock.
This function isn't worth optimizing. Hardly any functions use this
facility, and for those that do, they typically just capture one or two
variables.
* Convert `function_get_inherit_vars()` to return a reference to the
(possibly) existing map, rather than a copy;
* Preallocate and reuse a static (read-only) map for the (very) common
case of no inherited vars;
* Pass references to the inherit vars map around thereafter, never
triggering the map copy (or even move) constructor.
NB: If it turns out the reference is unsafe, we can switch the inherit vars
to be a shared_ptr and return that instead.
I did not realize builtins could safely call into the parser and inject
jobs during execution. This is much cleaner than hacking around the
required shape of a plain_statement.
`eval` has always been implemented as a function, which was always a bit
of a hack that caused some issues such as triggering the creation of a
new scope. This turns `eval` into a decorator.
The scoping issues with eval prevented it from being usable to actually
implement other shell components in fish script, such as the problems
described in #4442, which should now no longer be the case.
Closes#4443.
While `eval` is still a function, this paves the way for changing that
in the future, and lets the proc/exec functions detect when an eval is
used to allow/disallow certain behaviors and optimizations.
Prior to this fix, a job would only inherit a pgrp from its parent if the
first command were external. There seems to be no reason for this
restriction and this causes tcsetgrp() churn, potentially cuasing SIGTTIN.
Switch to unconditionally inheriting a pgrp from parents.
This should fix most of #5765, the only remaining question is
tcsetpgrp from builtins.
Prior to this fix, in every call to job_continue, fish would reclaim the
foreground pgrp. This would cause other jobs in the pipeline (which may
have another pgrp) to receive SIGTTIN / SIGTTOU.
Only reclaim the foreground pgrp if it was held at the point of job_continue.
This partially addresses #5765
If a function process is deferred, allow it to be unbuffered.
This permits certain simple cases where functions are piped to external
commands to execute without buffering.
This is a somewhat-hacky stopgap measure that can't really be extended
to more general concurrent processes. However it is overall an improvement
in user experience that might help flush out some bugs too.
In a job, a deferred process is the last fish internal process which pipes
to an external command. Execute the deferred process last; this will allow
for streaming its output.
In fish we play fast and loose with status codes as set directly (e.g. on
failed redirections), vs status codes returned from waitpid(), versus the
value $status. Introduce a new value type proc_status_t to encapsulate
this logic.
Now that we use an internal process to perform builtin output, simplify the
logic around how it is performed. In particular we no longer have to be
careful about async-safe functions since we do not fork.
Also fix a bunch of comments that no longer apply.
This uses the new internal process mechanism to write output for builtins.
After this the only reason fish ever forks is to execute external processes.
This introduces "internal processes" which are backed by a pthread instead
of a normal process. Internal processes are reaped using the topic
machinery, plugging in neatly alongside the sigchld topic; this means that
process_mark_finished_children() can wait for internal and external
processes simultaneously.
Initially internal processes replace the forked process that fish uses to
write out the output of blocks and functions.
The sigchld generation expresses the idea that, if we receive a sigchld
signal, the generation will be different than when we last recorded it. A
process cannot exit before it has launched, so check the generation count
before process launch. This is an optimization that reduces failing
waitpid calls.
This is a large change to how io_buffers are filled. The essential problem
comes about with code like (example):
echo ( /bin/pwd )
The output of /bin/pwd must go to fish, not the tty. To arrange for this,
fish does the following:
1. Invoke pipe() to create a pipe.
2. Add an io_bufferfill_t redirection that owns the write end of the pipe.
3. After fork (or equiv), call dup2() to replace pwd's stdout with this pipe.
Now when /bin/pwd writes, it will send output to the read end of the pipe.
But who reads it?
Prior to this fix, fish would do the following in a loop:
1. select() on the pipe with a 10 msec timeout
2. waitpid(WNOHANG) on the pwd proc
This polling is ugly and confusing and is what is replaced here.
With this new change, fish now reads from the pipe via a background thread:
1. Spawn a background pthread, which select()s on the pipe's read end with
a long (100 msec) timeout.
2. In the foreground, waitpid() (allowing hanging) on the pwd proc.
The big win here is a major simplification of job_t::continue_job() since
it no longer has to worry about filling buffers. This will make things
easier for concurrent execution.
It may not be obvious why the background thread still needs a poll (100 msec).
The answer is for cases where the write end of the fd escapes, in particular
background processes invoked inside command substitutions. psub is perhaps
the only important case of this (other shells typically just hang here).
This makes some significant architectual improvements to io_pipe_t and
io_buffer_t.
Prior to this fix, io_buffer_t subclassed io_pipe_t. io_buffer_t is now
replaced with a class io_bufferfill_t, which does not subclass pipe.
io_pipe_t no longer remembers both fds. Instead it has an autoclose_fd_t,
so that the file descriptor ownership is clear.
This switches IO redirections after fork() to use the dup2_list_t,
instead of io_chain_t. This results in simpler code with much simpler
error handling.
This is a large change to how io_buffers are filled. The essential problem
comes about with code like (example):
echo ( /bin/pwd )
The output of /bin/pwd must go to fish, not the tty. To arrange for this,
fish does the following:
1. Invoke pipe() to create a pipe.
2. Add an io_bufferfill_t redirection that owns the write end of the pipe.
3. After fork (or equiv), call dup2() to replace pwd's stdout with this pipe.
Now when /bin/pwd writes, it will send output to the read end of the pipe.
But who reads it?
Prior to this fix, fish would do the following in a loop:
1. select() on the pipe with a 10 msec timeout
2. waitpid(WNOHANG) on the pwd proc
This polling is ugly and confusing and is what is replaced here.
With this new change, fish now reads from the pipe via a background thread:
1. Spawn a background pthread, which select()s on the pipe's read end with
a long (100 msec) timeout.
2. In the foreground, waitpid() (allowing hanging) on the pwd proc.
The big win here is a major simplification of job_t::continue_job() since
it no longer has to worry about filling buffers. This will make things
easier for concurrent execution.
It may not be obvious why the background thread still needs a poll (100 msec).
The answer is for cases where the write end of the fd escapes, in particular
background processes invoked inside command substitutions. psub is perhaps
the only important case of this (other shells typically just hang here).
This makes some significant architectual improvements to io_pipe_t and
io_buffer_t.
Prior to this fix, io_buffer_t subclassed io_pipe_t. io_buffer_t is now
replaced with a class io_bufferfill_t, which does not subclass pipe.
io_pipe_t no longer remembers both fds. Instead it has an autoclose_fd_t,
so that the file descriptor ownership is clear.
This switches IO redirections after fork() to use the dup2_list_t,
instead of io_chain_t. This results in simpler code with much simpler
error handling.
Now jobs are aware of their parent jobs, and can interrogate those jobs,
to determine if every job in the chain is fully constructed.
Remove flags and the static stacks that manipulated them.
The parent of a job is the parent pipeline that executed the function or
block corresponding to this job. This will help simplify
process_mark_finished_children().
When a function is encountered by exec_job, a new context is created for
its execution from the ground up, with a new job and all, ultimately
resulting in a recursive call to exec_job from the same (main) thread.
Since each time exec_job encounters a new job with external commands
that needs terminal control it creates a new pgrp and gives it control
of the terminal (tcsetpgrp & co), this effectively takes control away
from the previously spawned external commands which may be (and likely
are) expecting to still have terminal access.
This commit attempts to detect when such a situation arises by handling
recursive calls to exec_job (which can only happen if the pipeline
included a function) by borrowing the pgrp from the (necessarily still
active) parent job and spawning new external commands into it.
When a parent job spawns new jobs due to the evaluation of a new
function (which shouldn't be the case in the first place), we end up
with two distinct jobs sharing one pgrp (to fix#3952). This can lead to
early termination of a pgrp if finished parent job children are reaped
before future processes in either the parent or future child jobs can
join it.
While the parent job is under construction, require that waitpid(2)
calls for the child job be done by process id and not job pgrp.
Closes#3952.
* Convert JOB_* enums to scoped enums
* Convert standalone job_is_* functions to member functions
* Convert standalone job_{promote, signal, continue} to member functions
* Convert standolen job_get{,_from_pid} to `job_t` static functions
* Reduce usage of JOB_* enums outside of proc.cpp by using new
`job_t::is_foo()` const helper methods instead.
This patch is only a refactor and should not change any functionality or
behavior (both observed and unobserved).
* Debug level 3: describe all commands being executed (this is, after all,
a shell and one can argue that this is the most important debug
information avaliable)
* Debug level 4: details of execution, mainly fork vs no-fork and io
handling
Also introduced j->preview() to print a short descriptor of the job
based on the head of the first process so we don't overwhelm with
needless repitition, but also so that we don't have to rely on
distinguishing between repeated, non-unique/non-monotonic job ids that
are often recycled within a single "execution cycle" (pressing enter
once).
* Instead of reaping all child processes when we receive a SIGCHLD, try
reaping only processes belonging to process groups from fully-
constructed jobs, which should eliminate the need for the keepalive
process entirely (WSL's lack of zombies not withstanding) as now
completed processes are not reaped until the job has been fully
constructed (i.e. all processes launched), which means their process
group should still be around for new processes to join.
* When `tcgetpgrp()` calls return 0, attempt to `tcsetpgrp()` before
invoking failure handling code.
* When forking a builtin and not running interactively, do not bail if
unable to set/restore terminal attributes.
Fixes#4178. Fixes#3805. Fixes#5210.
This reverts commit 8c14f0f30f.
This list is not reliable - there are many ways for fish to quit that does not
invoke these functions. It's also not necessary since the history is correctly
saved on exec.
