Inside a comment we offer plain file completions (or command completions if
the comment is in command position). However these completions are broken
because they don't consider any of the surrounding characters. For example
with a command line
echo # comment
^ cursor
we suggest file completions and insert them as
echo # comsomefile ment
Providing completions inside comments does not seem useful and it can be
misleading. Let's remove the completions; this should communicate better that
we are in a free-form comment that's not subject to fish syntax.
Closes#9320
This fixes#9321
IEEE Std 1003.1-2017 Issue 6 added optional error condition
[EINVAL] for if no conversion could be performed.
Switch back to wcstoimax/wcstoumax: do not work around the old FreeBSD
8 issue.
Add a test for printf '%d %d' 1 2 3
Like the pexpect-based pager compeltions test `complete-group-order.py`, but for
the `complete` builtin. Verifies the same sort/dedup rules that apply to the
pager are also applied to the output of `complete` and asserts the sort behavior
for multiple `complete -k` calls for the same command and with the same (or with
both passing) preconditions.
This addresses a long-standing TODO where `complete -C` output isn't
deduplicated.
With this patch, the same deduplication and sort procedure that is run on actual
pager completions is also executed for `complete -C` completions (with a `-C`
payload specified).
This makes it possible to use `complete -C` to test what completions will
actually be generated by the completions pager instead of it displaying
something completely divorced from reality, improving the productivity of fish
completions developers.
Note that completions that wouldn't be shown in the pager are also omitted from
the results, e.g. `test/buildroot/` and `test/fish_expand_test/` are omitted
from the check matches in `checks/complete_directories.fish` because even if
they were generated, the pager wouldn't have shown them. This again makes
reasoning about and debugging completions much easier and more sane.
Fixes ommitted newline char shown after complete -n'(foo)'
Also axes the 'contains syntax errors' line before the error.
Update tests
before
> complete -n'(foo)'
complete: Condition '(foo)' contained a syntax error
complete: Command substitutions not allowed⏎
after
> complete -n'(foo)'
complete: -n '(foo)': command substitutions not allowed here
Ensure that multiple `-k` completions intermixed with one or more non-`-k`
completions are produced in the expected order with the order of all completions
in a single `-k` completion respected, non-`-k` completions correctly sorted and
interspersed, and the results of multiple `-k` completions in the
reverse-intuitive order (with chronologically later completions coming before
chronologically earlier `-k` counterparts), as per #9221.
This particular variant must be executed as a pexpect test since it relies on
the interactive-only `$history` to trigger the recursion. Note that recursion is
possible via other means (e.g. reading/writing a file), the usage of history
here is just one such example.
A false negative while testing locally should be a rare thing, and individual
pexpect tests already take too long in case of a non-match making for a painful
edit-test loop.
Up to now, in normal locales \x was essentially the same as \X, except
that it errored if given a value > 0x7f.
That's kind of annoying and useless.
A subtle change is that `\xHH` now represents the character (if any)
encoded by the byte value "HH", so even for values <= 0x7f if that's
not the same as the ASCII value we would diverge.
I do not believe anyone has ever run fish on a system where that
distinction matters. It isn't a thing for UTF-8, it isn't a thing for
ASCII, it isn't a thing for UTF-16, it isn't a thing for any extended
ASCII scheme - ISO8859-X, it isn't a thing for SHIFT-JIS.
I am reasonably certain we are making that same assumption in other
places.
Fixes#1352
We forgot to decode (i.e. turn into nice wchar_t codepoints)
"byte_literal" escape sequences. This meant that e.g.
```fish
string match ö \Xc3\Xb6
math 5 \X2b 5
```
didn't work, but `math 5 \x2b 5` did, and would print the wonderful
error:
```
math: Error: Missing operator
'5 + 5'
^
```
So, instead, we decode eagerly.
Prior to 1811a2d, the return value for negative return codes was UB and I'd
witnessed both expected cases like -256 mapping to a $status of 0 and unexpected
cases like a return value of -1 mapping to a $status of 0. As such, this doesn't
test just one fixed return value but the entire range from negative multiples of
256 all the way down (rather, up!) to -1.
...for improved cross-platform support.
Following up on the work in c90ac7b. There was one more test that had mktemp in
the littlecheck "shebang" and this also removes a now-unnecessary `env` prefix.
All usages of `mktemp` must go through the (fish-only) `mktemp` test function
that abstracts over the differences across multiple platforms/flavors.
Tests can be easily run individually via `ninja -C build test_xxx` and there
isn't a good reason to randomly manually override $HOME and $XDG_CONFIG_HOME for
a test here and a test there.
If it's absolutely necessary, littlecheck.py should be extended to support a
`%temp` variable initialized to a temporary directory and that can be used
instead of calling out to the platform-provided `mktemp` via a subshell.
For unknown reasons, the i686 launchpad builders fail on this date,
but apparently not the others.
Let's just remove it, we've tested dates older than the epoch, this is
slightly redundant.
As discussed in #9221, a bug in the autocomplete that was fixed in 66391922
caused completions to be incorrectly suppressed. The dropped test/check was
inadvertently relying on the buggy behavior and expected a git invocation to
generate no completions but there are, in fact, completions now that the bug has
been resolved.
cc @faho: I'm not sure if you want to replace this with a different check that
actually doesn't yield any completions or if you're happy with it just being
dropped.
This fails on old Ubuntu with:
> touch: invalid date format ‘190112112040.39’
Because we don't actually need the seconds here, we just use minute
resolution. It's fine.
Also use `path mtime`, because that's a portable way to get the mtime.
I forgot `stat` is non-portable. There's no great way to portably get a
machine-readable representation of stat(2) for a file. I don't want to ship our
own lstat(2) wrapper executable just for this test and don't want to fork out to
python or perl for this either - I just wanted to get the tests to pass under
WSL :'(
Anyway, just give up and make it skip just for WSL. If another OS fails this
test in the future, the comments and existing workaround will make it easy to
figure out what the problem is and what needs to be done. We'll cross that
bridge when we get there.
It turns out that not all systems print an unsigned integer as the output of
`stat -c %Y xxx` and the leading `-` can be misinterpreted as a parameter to
`string match`.
There's no guarantee (nor requirement) that the filesystem support pre-epoch
modification dates. If it doesn't, the `test` tests were failing to get the
expected results.
Skip the test if it seems the fs doesn't support pre-epoch timestamps
(determined by pre-epoch mt of `oldest` evaluating to 0 or the unix epoch).
* Replace ";" with "\n" in alias-generated functions
This can let us add a "#" in our aliases to make
them ignore additional arguments.
* Update changelog about aliases that ignore arguments
* Update test for alias.fish
This is now compliant with the aliases that can
ignore arguments.
When fish runs with job control enabled, it transfers ownership of the
tty to a child process, and then reclaims the tty after the process
exits. If job control is disabled then fish does not transfer or reclaim
the tty.
It may happen that the child process creates a pgroup and then transfers
the tty to it. In that case fish will not attempt to reclaim the tty, as
fish did not transfer it. Then when fish reads from stdin it will
receive SIGTTIN instead of data.
Fix this by unconditionally claiming the tty in readline().
Fixes#9181
This errored out *later* because the result was infinite or NaN, but
it didn't actually stop evaluation.
I'm not sure if there is a way to get floating point math to turn an
infinity back into something that doesn't depend on a literal
infinity, but division by zero conceptually isn't a thing we can
support.
There's entire branches of maths dedicated to figuring out what
dividing by "basically zero" means and we don't have to get into it.
