Today the reader exposes its internals directly, e.g. to the commandline
builtin. This is of course not thread safe. For example in concurrent
execution, running `commandline` twice in separate threads would cause a
race and likely a crash.
Fix this by factoring all the commandline state into a new type
'commandline_state_t'. Make it a singleton (there is only one command
line
after all) and protect it with a lock.
No user visible change here.
This apparently doesn't work at all under Github Actions with tsan, so let's skip it.
If anyone feels the need to dig deeper into this, have at it. I find
this distracting.
When the user presses control-C, fish marks a cancellation signal which
prevents fish script from running, allowing it to properly unwind.
Prior to this commit, the signal was cleared in the reader. However this
missed the case where a binding would set $fish_bind_mode which would
trigger event handlers: the event handlers would be skipped because of
the cancellation flag was still set. This is similar to #6937.
Let's clear the flag earlier, as soon as we it's set, in inputter_t.
Fixes#8125.
This is the last time I'm doing this before I rip these particular
tests out.
As far as I know there is no actual *problem* here, this is just
failing through a combination of macOS and Github Actions being slow
as molasses.
So it is wasting our time and therefore worse than not having these
tests at all, especially since they very rarely fail for good reasons.
We would leave some escape delay tests intact with generous timeouts, which would provide 90%
of the coverage with 10% of the hassle.
This simply checks if the parser requested exit after running any
binding scripts (in read_normal_chars).
I think this means we no longer need the `exit` bind function.
Fixes#7967.
Make it an ordinary struct wrapping a vector, instead of a template.
This is in preparation for using it more widely, for matching bindings
as well as mouse CSI sequences.
Also add some mouse-disabling tests.
This runs in 100ms increments, so there's not a lot of harm in trying
longer - it should take the same time everywhere it succeeded before.
But I've reproduced failures on FreeBSD 13 on sr.ht, so there's at
least one platform where a total time of 1 second isn't enough.
Now we do 50 tries, which is 5 seconds.
This could have been one iteration off, e.g.
```fish
function on-winch --on-signal winch
echo $LINES
end
```
Resize the terminal, it'll print e.g.
24
then run `echo $LINES` interactively, it might have a different answer.
This isn't beautiful, but it works. A better solution might be to make
the termsize vars electric and just always update them on read?
When fish starts, it notices which pgroup owns the tty, and then it
restores that pgroup's tty ownership when it exits. However if fish does
not own the tty, then (on Mac at least) the tcsetpgrp call triggers a
SIGSTOP and fish will hang while trying to exit.
The first change is to ignore SIGTTOU instead of defaulting it. This
prevents the hang; however it risks re-introducing #7060.
The second change somewhat mitigates the risk of the first: only do the
restore if the initial pgroup is different than fish's pgroup. This
prevents some useless calls which might potentially steal the tty from
another process (e.g. in #7060).
This concerns the behavior when running an external command from a key
binding. The history is:
Prior to 5f16a299a7, fish would run these external commands in shell
modes. This meant that fish would pick up any tty changes from external
commands (see #2114).
After 5f16a299a7, fish would save and restore its shell modes around
these external commands. This introduced a regression where anything the
user typed while a bound external command was executing would be echoed,
because external command mode has ECHO set in c_lflag. (This can be
reproed easily with `bind -q 'sleep 1'` and then pressing q and typing).
So 5f16a299a7 was reverted in fd9355966.
This commit partially reverts fd9355966. It has it both ways: external
commands are launched with shell modes, but/and shell modes are restored
after the external command completes. This allows commands to muck with
the tty, as long as they can handle getting shell modes; but it does not
enable ECHO mode so it fixes the regression found in #7770.
Fixes#7770. Fixes#2114 (for the third time!)
This partially reverts commit fd9355966e.
Unfortunately this causes input coming in while bind functions are
running to show up on screen.
Since the cure is worse than the disease let's just stop doing it.
My guess is this needs to *only* be done while running an external
command.
Fixes#7770
Reintroduces #2114
Partially reverts 5f16a299a7
For reasons unclear to me, fish enables bold mode unconditionally if
the background is set.
However, this called a background "set" if it wasn't exactly the
"normal" color, whereas set_color --print-colors would set a color
of *none*.
We have three special non-color colors:
- "normal"
- "reset"
- "none"
All of these specify some form of absence of background color, so all
of them should be checked.
Fixes#7805
NetBSD's sleep quits when foregrounded sometimes. I'm not entirely
sure *why*, but this is reproducible with the default /bin/sh, so it's
not our fault.
Because this fails our tests, go back to using cat *there*, because we
can't use it on macOS - 4c9d01cab0.
This fails on FreeBSD on sr.ht and NetBSD on my own VM, but it works manually.
It also fails on macOS but I have no way to confirm.
I think it might be a problem in pexpect's platform support?
Either way, the test is valuable so just skip it there and solve it later.
This was lost in
6bdbe732e40c2e325aa15fcf0f28ad0dedb3a551..c7160d7cb4970c2a03df34547f357721cb5e88db.
Note that we only print a term-support flog message for now, the
warning seems a bit much.
Fixes#7709.
Prior to this change, `fish_private_mode` worked by just suppressing
history outright. With this change, `fish_private_mode` can be toggled on
and off. Commands entered while `fish_private_mode` is set are stored but
in memory only; they are not written to disk.
Fixes#7590Fixes#7589
Don't go into implicit interactive mode without ever executing
anything - not even `exit` or reacting to ctrl-d. That just renders
the shell useless and unquittable.
This increases a 100ms timeout to 200ms, because we've hit it on
Github Actions:
```
INPUT 3904.65 ms (Line 223): set -g fish_escape_delay_ms 100\n
OUTPUT +1.74 ms (Line 224): \rprompt 25>
INPUT +0.71 ms (Line 230): echo abc def
INPUT +0.57 ms (Line 231): \x1b
INPUT +0.57 ms (Line 232): t\r
OUTPUT +2.41 ms (Line 234): \r\ndef abc\r\n
OUTPUT +1.63 ms (Line 234): \rprompt 26>
INPUT +0.75 ms (Line 239): echo ghi jkl
INPUT +0.57 ms (Line 240): \x1b
INPUT +134.98 ms (Line 242): t\r
```
In other places it decreases sleeps where we just wait for a timeout to elapse, in which case we don't need much longer than the timeout.
And again clang-format does something I don't like:
- if (found != end && std::strncmp(found->name, name, len) == 0 && found->name[len] == 0) return found;
+ if (found != end && std::strncmp(found->name, name, len) == 0 && found->name[len] == 0)
+ return found;
I *know* this is a bit of a long line. I would still quite like having
no brace-less multi-line if *ever*. Either put the body on the same
line, or add braces.
Blergh
Prior to this fix, when key binding is a script command (i.e. not a
readline command), fish would run that key binding using fish's shell
tty modes. Switch to using the external tty modes. This re-fixes
issue #2214.
With the upcoming fix to place the tty in external-proc mode, add a sleep
which resolves a race between emitting a newline and restoring it to shell
mode.
Prior to this change, when a process resumes because it is brought back
to the foreground, we would reset the terminal attributes to shell mode.
This fixed#2114 but subtly introduced #7483.
This backs out 9fd9f70346, re-introducing #2114 and re-fixing #7483.
A followup fix will re-fix #2114; these are broken out separately for
bisecting purposes.
Fixes#7483.
I *think* this might sometimes (on CI) be eating the prompt, so that the actual `prompt`
part of `expect_prompt` doesn't find anything.
On Github Actions we see things like:
```
Testing file pexpects/generic.py ... Failed to match pattern: prompt 5
generic.py:35: timeout from expect_prompt("echo .history.*")
[...]
OUTPUT +1.08 ms (Line 31): \rprompt 4>
INPUT +0.35 ms (Line 34): echo $history[1]\n
OUTPUT +1.58 ms (Line 35): echo $history[1]\r\necho $history[1]\r\n⏎ \r⏎ \r\rprompt 5>
```
so the prompt *is* printed, it's just not correctly matched.
Apparently on macOS SIGTSTP (from control-Z) causes `read()` to return
EINTR.
This means `cat | cat` will exit as soon as it's backgrounded and
brought back.
So instead we use `sleep`, which won't read(), and therefore is
impervious to these puny attacks.
See discussion in #7447.
The classic mistake: Some of these have a bit of a delay, but it's supposed to
be *under* the timeout, so it needs to be *shorter* not longer to
increase the slack.
We just had the following output on Github Actions:
INPUT +0.94 ms (Line 34): echo ghi jkl
INPUT +0.72 ms (Line 35): \x1b
INPUT +63.12 ms (Line 37): t\r
The default escape delay is 30ms, that had 60ms between an escape and
a tab, so it missed it.
So: We have to increase the delay for CI's benefit. Let's try with
80ms, because otherwise we'd have to bump up other timeouts and the
bind tests take long enough as it is.
Github Action's macOS builds are even more resource-starved (even tho
they use the same provider?) than
Travis, but Travis is unusable to us now, so....
In some cases the completion we come up with may be unexpected, e.g.
if you have files like
/etc/realfile
and
/etc/wrongfile
and enter "/etc/gile", it will accept "wrongfile" because "g" and
"ile" are in there - it's a substring insertion match.
The underlying cause was a typo, so it should be easy to go back.
So we do a bit of magic and let "cancel" undo, but only right after a
completion was accepted via complete or complete-and-search.
That means that just reflexively pressing escape would, by default, get you back to
the old token and let you fix your mistake.
We don't do this when the completion was accepted via the pager,
because 1. there's more of a chance to see the problem there and 2.
it's harder to redo in that case.
Fixes#7433.
We've heard news of this regressing, so let's add the test that should
have been there already (mea culpa!).
Because we now use POSIX_VDISABLE, this should also work in tandem
with ctrl-space (which sends NUL), but we can't test *that* because
some systems might not have POSIX_VDISABLE.
Ensure that the increment= param is set via keyword, not via positional arg.
This mistake was masking a bug where the "^a b c" match was not being tested,
because it was being set as the value for increment!
This switches the 'increment' param from "after" to "before." Instead
of expect_prompt saying if the next prompt will be incremented, each
call site says if it should have been incremented sinec the last prompt.
This makes history searches case-insensitive, unless the search string
contains an uppercase character.
This is what vim calls "smartcase".
Fixes#7273.
Since builtins don't actually have the streams connected, but instead
read input via the io_streams_t objects, this would just always say
what *fish's* fds were.
Instead, pass along some of the stream data to check those
specifically - nobody cares that `test`s fd 0 *technically* is stdin.
What they want to know is that, if they used another program in that
place, it would connect to the TTY.
This is pretty hacky - I abused static variables for this, but
since it's two bools and an int it's probably okay.
See #1228.
Fixes#4766.
With a commandline like
```
a b c d
```
and the cursor at the beginning, this would eat "a b", which isn't a
sensible bigword.
Bigword should be "a word, with optional leading whitespace".
This was caused by an overly zealous state-machine that always ate one
char and only *then* started eating leading whitespace.
Instead eat *a character*, and if it was whitespace go on eating
whitespace, and if it was a printable go straight to only eating
printables.
Fixes#7325.
This can easily lead to an infinite loop, if a variable handler
triggers a repaint and the variable is set in the prompt, e.g. some of
the git variables.
A simple way to reproduce:
function fish_mode_prompt
commandline -f repaint
end
Repainting executes the mode prompt, which triggers a repaint, which
triggers the mode prompt, ....
So we just set a flag and check it.
Fixes#7324.
Prior to this change, if we saw more than one repaint readline command in
a row, we would try to ignore the second one. However this was never the
right thing to do since sometimes we really do need to repaint twice in a
row (e.g. the user hits Ctrl+L twice). Previously we were saved by the
buginess of this mechanism but with the repainting refactoring we see
missing redraws.
Remove the coalescing logic and add a test. Fixes#7280.
Because TERM was set to something other than 'dumb', we were subject to
syntax highlighting and other interactive features that would affect the
output. In practice we were getting lucky timing-wise, but with upcoming
interactive changes syntax highlighting started to fail this test.
This concerns code like the following:
while true ; sleep 100; end
Here 'while' is a "simple block execution" and does not create a new job,
or get a pgid. Each 'sleep' however is an external command execution, and
is treated as a distinct job. (bash is the same way). So `while` and
`sleep` are always in different job groups.
The problem comes about if 'sleep' is cancelled through SIGINT or SIGQUIT.
Prior to 2a4c545b21, if *any* process got a SIGINT or SIGQUIT, then fish
would mark a global "stop executing" variable. This obviously prevents
background execution of fish functions.
In 2a4c545b21, this was changed so only the job's group gets marked as
cancelled. However in the case of one job group spawning another, we
weren't propagating the signal.
This adds a signal to parse_execution_context which the parser checks after
execution. It's not ideal since now we have three different places where
signals can be recorded. However it fixes this regression which is too
important to leave unfixed for long.
Fixes#7259
Might help figuring out where this times out on CI?
We're waiting *20 seconds* for the output to appear, there's no way
that's too slow. So maybe we're going too fast elsewhere?
It's useless - `expect` has a timeout anyway, and it defaults to 5s,
so these 0.5s sleeps just mean it'll always take at least 0.5s.
Sometimes it is useful to let things settle before *sending* text, and
it would be nice to be able to set the timeout for each expect
separately, but just adding to the timeout isn't useful.
This can be used to determine whether the previous command produced a real status, or just carried over the status from the command before it. Backgrounded commands and variable assignments will not increment status_generation, all other commands will.
This changes how fish attempts to protect itself from calling tcsetpgrp() too
aggressively. Recall that tcsetpgrp() will "force" itself, if SIGTTOU is
ignored (which it is in fish when job control is enabled).
Prior to this fix, we avoided SIGTTINs by only transferring the tty ownership
if fish was already the owner. This dated from a time before we had really
nailed down how pgroups should be assigned. Now we more deliberately assign a
job's pgroup so we don't need this conservative check.
However we still need logic to avoid transferring the tty if fish is not the
owner. The bad case is when job control is enabled while fish is running in the
background - here fish would transfer the tty and "steal" from the foreground
process.
So retain the checks of the current tty owner but migrate them to the point of
calling tcsetpgrp() itself.
I really kinda hate how insistent clang-format is to have line
breaks *IFF THE LINE IS TOO LONG*.
Like... lemme just add a break if it looks better, will you?
But it is the style at this time, so we shall tie an onion to our
belt.
Note: This includes a super cheesy thing to print variable contents.
The expect version has one that's a bit more elaborate (featuring a
marker setup), but tbh that doesn't seem to be worth it.
If we do need it, we can add it, but it seems more likely we'd just do
`set -S`, or do it in a check instead.
