* add adb options
only complete device serial when space after '-s' option
* keep current `adb -s` completion
* add adb reboot fastboot
* only show tcp/ip devices for disconnect
Signed-off-by: Next Alone <12210746+NextAlone@users.noreply.github.com>
* fix: files not complete when options given
Signed-off-by: Next Alone <12210746+NextAlone@users.noreply.github.com>
* fix: use old-style options for adb generic options
Signed-off-by: Next Alone <12210746+NextAlone@users.noreply.github.com>
Signed-off-by: Next Alone <12210746+NextAlone@users.noreply.github.com>
* completion/usbip: use string-match to detect remote (#9250)
* simplify output
Signed-off-by: Next Alone <12210746+NextAlone@users.noreply.github.com>
Signed-off-by: Next Alone <12210746+NextAlone@users.noreply.github.com>
I have about fifty git branches for fish and I almost always `git checkout`
between the most recent two or three - this makes the completions list more
usable. If you're using `git cherry-pick` or `git merge`, etc. you also most
likely to want to reference a recently changed branch.
The decision was made to only sort local branches and not remote ones in the PR
at #9248.
The performance of changing from one `git for-each-ref` invocation to two
separate ones (so we could sort them separately) was checked and found to be OK.
Food for future thought: consider ergonomics, caveats, and performance of
excluding the current branch's name from the list of completions (or perhaps
only from the first completion). Or maybe there's another way to have
`for-each-ref` give priority to a different branch while still sorting by
recency?
There are a million existing ways of skinning this cat, but it's a good parallel
to `__fish_seen_argument` to have, in a similar vein to
`__fish_seen_subcommand_from`.
Confirmed on NetBSD: The `ls -o` option groups. I tested `ls -gon` and
it didn't give an error.
It's quite suspect that this one option couldn't be grouped, so I'm
assuming this was a typo.
Commit 09685c3682 tried making the apt
completions faster by doing two things:
1. Introduce a limiting "head"
2. Re-replace our "string" usage with tr
Unfortunately, in doing so it introduced a few issues:
1. The "tr" had a dangling "+" so it cut apart package
descriptions that contained a "+".
This caused e.g. "a C++ library" to generate another completion
candidate, "library".
2. In reusing "tr" it probably reintroduced #8575,
as tr is not 8-bit-clean.
3. It filtered too early, on the raw apt-cache output,
which caused it to fill up with long descriptions.
So e.g. for "texlive" it would only generate 10 completions,
where it should have matched 54 packages.
Because most of the speedup is in the "head" stopping early, we
instead go back to the old string way, but introduce a limiting "head"
after the "sed" (which will have removed everything but the package
name line and the first line of the description)
In my tests this is about ~10% slower than doing head early and using
tr, but it's more correct.
Admittedly I haven't been able to reproduce the 35s scenario that
09685 talks about, but the most likely cause of that is *apt-cache*
being slow - I don't see how string can be that much slower on another
system - and so it will most likely also be fixed by doing head here.
Future possibilities here include:
1. Using "apt-cache search --names-only", which gives a much nicer
format (but only for non-installed packages - the search strings are
apparently ANDed?)
2. Switching to `string split`, possibly using NUL and using `string
split0`?
3. Introducing a `string --null-in` switch so we can get by with one
`string`
4. (multi-threaded execution so the `string`s run in parallel)
`apt-cache` is just so incredibly slow that filtering against the final results
just doesn't cut it. Attempting to match against 'ac.*' (already taking
advantage of changing short search terms into prefix-only matches) would take
35 seconds, all of bottlenecked before the filtering step. This change uses more
of a heuristic to filter `apt-cache` results directly (before additional
filtering) to speed things up.
A variety of different limits from 100 to 5000 were timed and their result sets
compared to see what ended up artificially limiting valid completions vs what
took too long to be considered functional/usable and this is where we ended up.
`gh` doesn't write its errors to stderr and doesn't exit with a non-zero status
code in case of failure. The completions are short enough that buffering them
isn't a huge deal.
This cuts down `__fish_git_using_command` calls from 75 to 68, saving
some time in the common case.
(it would be possible to remove the check from
`__fish_git_stash_using_command` now, but that's brittle and it's one
call, so it's not a big issue)
* Replace ";" with "\n" in alias-generated functions
This can let us add a "#" in our aliases to make
them ignore additional arguments.
* Update changelog about aliases that ignore arguments
* Update test for alias.fish
This is now compliant with the aliases that can
ignore arguments.
This used a prompt command, but since the prompt was interpolated and
included a `?` it would be run as a glob without qmark-noglob.
Since it's simpler to pass a prompt string, just do that.
This checked the locale, but did so in a way that's fundamentally
broken:
1. $LANG isn't the only variable ($LC_ALL and $LC_CTYPE)
2. Even if $LANG is set that doesn't mean it's actually working
We could add a `status is-multibyte` here to figure out if we have a
multibyte locale?
But instead, since this is dealing with adding an ellipsis, let's just
add it to `string ellipsize`.
One slight difference is that shortening the branch now counts the ellipsis width.
I.e. assuming the branch is "long-branch-name"
```fish
set -g __fish_git_prompt_shorten_branch_len 8
```
might now print "long-br…" instead of "long-bra…". This is nicer because we can now give the actual maximum width.
The alternative is to add a "--exclusive" option to "string ellipsize" that doesn't count the ellipsis width. So `string ellipsize --char "..." --max 8" long-branch-name` might result in "long-bra...", which is 11 wide.
This is essentially the inverse of `string pad`.
Where that adds characters to get up to the specified width,
this adds an ellipsis to a string if it goes over a specific maximum width.
The char can be given, but defaults to our ellipsis string.
("…" if the locale can handle it and "..." otherwise)
If the ellipsis string is empty, it just truncates.
For arguments given via argv, it goes line-by-line,
because otherwise length makes no sense.
If "--no-newline" is given, it adds an ellipsis instead and removes all subsequent lines.
Like pad and `length --visible`, it goes by visible width,
skipping recognized escape sequences, as those have no influence on width.
The default target width is the shortest of the given widths that is non-zero.
If the ellipsis is already wider than the target width,
we truncate instead. This is safer overall, so we don't e.g. move into a new line.
This is especially important given our default ellipsis might be width 3.
pipenv switched from older click-completion package to new built-in completions
from click framework in v2021.11.9.
This command achieves compatibility with both, older and more recent versions.
`cargo search` can be used to quickly get crates matching a search string, so we
can pass the current token for first-arg completions to `cargo add` and `cargo
install` to `cargo search` to look up matches.
`cargo search` doesn't restrict itself to (nor prioritize for) prefix matches,
while fish will only display prefix matches (for dynamically generated
completions) so it's perfectly possible for `cargo search foo` to return 20
results none of which will successfully result in a completion, but for a
further-narrowed completion of `cargo install foob^I" to then result in
completions because `cargo search` ended up returning a prefix match for `foob`
while it didn't for `foo`.
The only other oob cargo subcommand that takes a crate name (that isn't the name
of a crate specified in `Cargo.toml`) is `cargo search` but there's no point in
providing completions to that... I think (it's possible to search for crate
"foo" in order to get its latest version number rather than its name, but I'm
not sure that's worth supporting).
This expands completions of `cargo^I` to list any commands named `cargo-xxx` as
cargo subcommands invokable as `cargo xxx` in addition to the default oob
subcommands cargo ships with.
(This is very similar to how git allows users to shim their own subcommands.)
NOTE: This would stay even after cargo someday moves to clap and generates or
even ships/installs an official machine-generated `cargo.fish` completions
script.
The old way of generating cargo completions no longer work, so we need
to manually maintain the completions until clap completions support[1].
[1]: https://github.com/clap-rs/clap/issues/3166
This used `realpath -eq`, which for GNU realpath:
1. Suppresses "most error messages" (-q)
2. Requires that all parts exist (rather than allowing the last not
to)
Since we don't actually need a real path here, just filter.
Fixes#9099
* added completions for sad and added note in changelog
* ran fish_indent on completion file
* split -h and --help into two distinct completion options
This moves the stuff that creates skeleton/boilerplate files to
the same place we initialize uvars for the first time or on upgrade.
Being a bit less aggresssive here theoretically makes launch a little
lighter but really I personally just found it weird I couldn't
just delete my empty config.fish file without it getting recreated
and sourced every launch.
A recenty commit was loathe to assume the unicode ellipsis character
was safe so just used '..' instead. However I noticed we actually
already do use that character elsehwere in the completions.
So, just make both spots try to somewhat carefully use it.
We do this same `string match` check on LANG in fish_job_summary.fish
When adding a VLAN-enabled interface, it is named like enp0s31f6.100@enp0s31f6
with the physical interface being appended behind an @.
But subsequent ip commands operate on the interface name without this suffix,
so it needs to be removed when completing interface names in __fish_ip_device
These should be friendlier, but aren't as pedantically accurate.
I think the term "index" is terrible and much prefer "staging area".
Also "rev-parse" simply must be believed to be seen, it can't be
described in a single paragraph. (did you know you can use `git
rev-parse --parseopt` as a replacement for `getopt` in arbitrary
shell scripts?)
"socket.has_ipv6" is basically useless - it tells you python has
been *compiled* with ipv6 support.
Instead just try ipv6 and if that fails with EAFNOSUPPORT (checking
the actual errno), try v4.
Yes, I explicitly do not care to test this on python2.
Fixes#3857
I have an alias called "lg" for
log --color --graph --pretty=format:\'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset\' --abbrev-commit --first-parent
Having that in my completions ensures that git commands essentially
always use one column at most. That's not great, so we now shorten it
to 35 chars (plus an annoying 2 for ".." because I can't be bothered
to check for unicode support - an argument for a "string ellipsize", I guess?)
"git add ./" shows only hidden files (if at all). It should show all files
that can be added.
The problem is that candidates come from "git status" which prints clean
relative paths. Let's allow some unclean paths.
This is far from a complete fix but it should work for the common scenario.
Observe that wildcard_complete_internal() actually filters out all non-hidden
files, if the query is `./`.
Closes#9091
This reimplements ridiculousfish/control_r which is a more future-proof
approach than #6686.
Pressing Control+R shows history in our pager and allows to search filter
commands with the pager search field.
On the surface, this works just like in other shells; though there are
some differences.
- Our pager shows multiple results at a time.
- Other shells allow to use up arrow/down arrow to select adjacent entries
in history. Shouldn't be hard to implement but the hidden state might
confuse users and it doesn't play well with up-or-search, so this is
left out.
Users might expect the history pager to use subsequence matching (fuzzy
matching) like the completion pager, however due to the history pager design it
uses substring matching. We could change this in future, however that means
we would also want to change the ordering from "reverse-chronological" to
"longest common subsequence" (e.g. what fuzzy finders do), because otherwise
a query "fis" might give this ordering:
fsck /dev/disk/by-partlabel/Linux\x20filesystem
fish
which is probably not what the user wants.
The pager shows only a small number of history items at a time. This is
because, as explained above, the history pager does not support subsequence
matching, so navigating it does not scale well.
Closes#602
These are used in prompts only, and it feels weird not to have them.
In practice, fish_color_host_remote would not be used at all (just
because you switched from the default theme!), while fish_color_status
would fall back on a different value.
That'll be adjusted in the next commit.
