This reimplements ridiculousfish/control_r which is a more future-proof
approach than #6686.
Pressing Control+R shows history in our pager and allows to search filter
commands with the pager search field.
On the surface, this works just like in other shells; though there are
some differences.
- Our pager shows multiple results at a time.
- Other shells allow to use up arrow/down arrow to select adjacent entries
in history. Shouldn't be hard to implement but the hidden state might
confuse users and it doesn't play well with up-or-search, so this is
left out.
Users might expect the history pager to use subsequence matching (fuzzy
matching) like the completion pager, however due to the history pager design it
uses substring matching. We could change this in future, however that means
we would also want to change the ordering from "reverse-chronological" to
"longest common subsequence" (e.g. what fuzzy finders do), because otherwise
a query "fis" might give this ordering:
fsck /dev/disk/by-partlabel/Linux\x20filesystem
fish
which is probably not what the user wants.
The pager shows only a small number of history items at a time. This is
because, as explained above, the history pager does not support subsequence
matching, so navigating it does not scale well.
Closes#602
That's apparently errno 86 on macOS, and it's triggered when the
architecture is wrong.
I'll leave other macOS errors to the macOS users.
See #9052.
(cherry picked from commit 60f87ef3be)
This was supposed to be number of lines in the prompt minus 1, but
string repeat added one.
Also it triggered even in case of the stopped job message, which is
already repainted differently.
So we add it when we need to repaint ourselves.
As a bonus add a newline before in that case so the message isn't
awkwardly printed into the commandline.
Fixes#9044.
(cherry picked from commit 80fe0a7fcb)
Previously, the search text is used to find out which part of the
updated command line should be highlighted during a history search. This
approach will cause the incorrect part to be highlighted when the line
contains multiple instances of the search text.
To address this, we have to find out exactly where to highlight, i.e.
the offset of the current token in the command line (0 if not a token
search) plus the offset of the search text in the match.
If you run an initial command via `fish -c`, and that command is
cancelled e.g. via control-C, then ensure that the cancellation signal
is cleared before running config files.
Fixes#9024
(cherry picked from commit 137a4ecdf5)
Discussions with the tmux maintainer show that:
1. We no longer need the passthrough sequence at all (and it's
deactivated by default)
2. Tmux can check if the outer terminal supports cursor shaping
Fixes#8981
(cherry picked from commit b4a3b9982c)
Commit ad9b4290e optimized git completions by adding a completion that would
run on every completion request, which allows to precompute data used by
other completion entries. Unfortunately, the completion entry is not run
when the commandline contains a flag like `git -C`. If we didn't
already load git.fish, we'd error. Additionally, we got false positive
completions for `git diff -c`.
So this hack was a very bad idea. We should optimize in another way.
(cherry picked from commit fee5a9125a)
Commit ad9b4290e optimized git completions by adding a completion that would
run on every completion request, which allows to precompute data used by
other completion entries. Unfortunately, the completion entry is not run
when the commandline contains a flag like `git -C`. If we didn't
already load git.fish, we'd error. Additionally, we got false positive
completions for `git diff -c`.
So this hack was a very bad idea. We should optimize in another way.
[100%] Building HTML documentation with Sphinx
../CHANGELOG.rst:42: ERROR: Document or section may not begin with a transition.
[100%] Built target sphinx-docs
This is essentially a duplicate of commit cd1f0cc5d :-)
If you run an initial command via `fish -c`, and that command is
cancelled e.g. via control-C, then ensure that the cancellation signal
is cleared before running config files.
Fixes#9024
The recent improvements to multiline prompts and vi-mode in #3481 appear
to be sufficient to make iTerm2 well behaved, so remove our hack which
disabled it by default.
Fixes#3696
The fix for #3481 caused us to save the screen status after external
commands were run, fixing an unnecessary abandon-line when switching
modes. But we may also run commands not directly as part of a binding,
but instead via an on-variable event, e.g. for fish_bind_mode.
Extend this fix to all bindings, guarded by changes to exec_count. Now
any time an external command runs as part of a binding we should pick up
changes to the tty and not abandon the line.
Fixes#3481 again.
This concerns running a key binding which invokes a command. If that
command modifies the tty, then fish will spot the modification later and
then react to it by redrawing the prompt. However tty modifications may
be benign or desirable; for example switching the cursor from a line to
a block. Fix this by re-fstating the tty after running external
commands.
Fixes#3481
Previously, `kill-whole-line` kills the line and its following
newline. This is insufficient when we are on the last line, because
it would not actually clear the line. The cursor would stay on the
line, which is not the correct behavior for bindings like `dd`.
Also, `cc` in vi-mode used `kill-whole-line`, which is not correct
because it should not remove any newlines. We have to introduce
another special input function (`kill-inner-line`) to fix this.
This teaches `--on-signal SIGINT` (and by extension `trap cmd SIGINT`)
to work properly in scripts, not just interactively. Note any such
function will suppress the default behavior of exiting. Do this for
SIGTERM as well.
[ 97%] Building man pages with Sphinx
../CHANGELOG.rst:123: WARNING: Bullet list ends without a blank line; unexpected unindent.
[ 97%] Built target sphinx-manpages
[ 98%] Building HTML documentation with Sphinx
../CHANGELOG.rst:123: WARNING: Bullet list ends without a blank line; unexpected unindent.
Pressing Ctrl-D while a command is running results in a null key code in
our input queue. That key code is bound to insert a space (without expanding
abbreviations). Make it only insert a space if the commandline is non-empty,
to accommodate this use case.
This probably affects other keys as well.
Closes#8871
c4fb857dac (in 3.4.1) introduced a regression where process_exit
events would only fire once the job itself is complete. Allow
process_exit events to fire before that. Fixes#8914.
We don't need to make the feature flag descriptions as terse as
possible, I believe some people were confused by what this all means,
so we can dedicate a few lines to explaining it again.
[100%] Building HTML documentation with Sphinx
[100%] Building man pages with Sphinx
../CHANGELOG.rst:13: ERROR: Unexpected indentation.
../CHANGELOG.rst:15: WARNING: Block quote ends without a blank line; unexpected unindent.
../CHANGELOG.rst:13: ERROR: Unexpected indentation.
../CHANGELOG.rst:15: WARNING: Block quote ends without a blank line; unexpected unindent.
* Print message in set_fish_path -v when a path doesnt exist
* Update changelog
* Remove "; or continue"
* use printf instead of echo, avoid localizing the path
Prior to this change, if you tab-completed a token with a wildcard (glob), we
would invoke ordinary completions. Instead, expand the wildcard, replacing
the wildcard with the result of expansions. If the wildcard fails to expand,
flash the command line to signal an error and do not modify it.
Example:
> touch file(seq 4)
> echo file*<tab>
becomes:
> echo file1 file2 file3 file4
whereas before the tab would have just added a space.
Some things to note:
1. If the expansion would produce more than 256 items, we flash the command
line and do nothing, since it would make the commandline overfull.
2. The wildcard token can be brought back through Undo (ctrl-Z).
3. This only kicks in if the wildcard is in the "path component
containing the cursor." If the wildcard is in a previous component,
we continue using completions as normal.
Fixes#954.
When expanding command substitutions, we use a naïve way of detecting whether
the cmdsub has the optional leading dollar. We check if the last character was
a dollar, which breaks if it's an escaped dollar. We wrongly expand
\$(echo "") to the empty string. Fix this by checking if the dollar was escaped.
The parse_util_* functions have a bunch of output parameters. We should
return a parameter bag instead (I think I tried once and failed).
Given
set var a
echo "$var$(echo b)"
the double-quoted string is expanded right-to-left, so we construct an
intermediate "$varb". Since the variable "varb" is undefined, this wrongly
expands to the empty string (should be "ab"). Fix this by isolating the
expanded command substitution internally. We do the same when handling
unquoted command substitutions.
Fixes#8849
The tmp and prompt variables collide with variables used as arguments.
Just avoid them entirely, at the cost of making the internals of the
functions somewhat more complicated.
Closes#8836.
fish reads the tty modes at startup, and tries to restore them to the
original values on exit, to be polite. However this causes problems when
fish is run in a pipeline with another process which also messes with the
tty modes. Example:
fish -c 'echo foo' | vim -
Here vim's manipulation of the tty would race with fish, and often vim
would end up with broken modes.
Only restore the tty if we are interactive. Fixes#8705.
This is a big cleanup to how tty transfer works. Recall that when job
control is active, we transfer the tty to jobs via tcsetpgrp().
Previously, transferring was done "as needed" in continue_job. That is, if
we are running a job, and the job wants the terminal and does not have it,
we will transfer the tty at that point.
This got pretty weird when running mixed pipelines. For example:
cmd1 | func1 | cmd2
Here we would run `func1` before calling continue_job. Thus the tty
would be transferred by the nested function invocation, and also restored
by that invocation, potentially racing with tty manipulation from cmd1 or
cmd2.
In the new model, migrate the tty transfer responsibility outside of
continue_job. The caller of continue_job is then responsible for setting up
the tty. There's two places where this gets done:
1. In `exec_job`, where we run a job for the first time.
2. In `builtin_fg` where we continue a stopped job in the foreground.
Fixes#8699
* Implement fish_wcstod_underscores
* Add fish_wcstod_underscores unit tests
* Switch to using fish_wcstod_underscores in tinyexpr
* Add tests for math builtin underscore separator functionality
* Add documentation for underscore separators for math builtin
* Add a changelog entry for underscore numeric separators
Helm 3 provides an autogenerated completion since version 3.4.0.
The previous implementation is replaced by this because it was specific to the
now-deprecated helm 2.
The completions appear to be fully featured including descriptions and
completion for dynamic arguments such as namespaces and releases.
Their names are not perfect, so let's keep them as internal functions,
until we figure out how/if we want to expose this.
This reverts 0445126c2 (Undunder __fish_is_nth_token, 2021-06-29) (but I
did it without "git revert").
Closes#8008
If you have vim set up to recognize `.editorconfig` files, the 80-char limit
from ours causes vim to keep chopping lines. This makes it ignore that limit
when editing `CHANGELOG.rst`
Say the user has a multi-char binding (typically an escape sequence), and a
signal arrives partway through the binding. The signal has an event handler
which enques some readline event, for example, `repaint`. Prior to this
change, the readline event would cause the multi-char binding to fail. This
would cause bits of the escape sequence to be printed to the screen.
Fix this by noticing when a sequence was "interrupted" by a non-char event,
and then rotating a sequence of such interruptions to the front of the
queue.
Fixes#8628
Today, a command like "var=val status " has custom completions
because we skip over the var=val variable override when detecting
the command token.
However if the custom completions read the commandline state (via
"commandline -opc") they do see they variable override, which breaks
them, most likely. Try "a=b git ".
For completions of wrapped commands, we already set a transient
commandline. Do the same for commands with leading variable overrides;
then git completions for "a=b git " will think the commandline is
"git ".
