This lets us run non-fish targets (such as `fish_tests`) under a clean
test environment without running into the fish-specific payload
configuration now carried out by `test_driver.sh` which expects a
`.fish` payload that it will run under a deterministically configured
instance of fish, running in an environment initialized by
`test_env.sh`.
This should fix the problem with in-tree builds leaving detritus behind
after a `make test` when `fish_tests` would be executed without
`test_driver.sh` - it is now executed under `test_env.sh` instead.
For littlecheck/pexpect this just unconditionally enables color.
I have no idea what happens if you run cmake outside of a terminal
, but the worst that can happen is that *errors* have color
escapes in them.
If someone figures out how to get cmake to tell us if it's running in
a terminal, we can add a check.
This means instead of printing at least two lines per successful test,
we overwrite one line again and again with the current status, and
for *failed* (i.e interesting) tests we print the output.
Makes test failures much more visible.
`test:foo` is not allowed by CMake ("reserved name") and `test/foo`
won't work since CMake doesn't allow targets to have a directory
separator in their name.
Even though we are using CMake's ctest for testing, we still define our
own `make test` target rather than use its default for many reasons:
* CMake doesn't run tests in-proc or even add each tests as an
individual node in the ninja dependency tree, instead it just bundles
all tests into a target called `test` that always just shells out to
`ctest`, so there are no build-related benefits to not doing that
ourselves.
* CMake devs insist that it is appropriate for `make test` to never
depend on `make all`, i.e. running `make test` does not require any
of the binaries to be built before testing.
* The only way to have a test depend on a binary is to add a fake test
with a name like "build_fish" that executes CMake recursively to
build the `fish` target.
* It is not possible to set top-level CTest options/settings such as
CTEST_PARALLEL_LEVEL from within the CMake configuration file.
* Circling back to the point about individual tests not being actual
Makefile targets, CMake does not offer any way to execute a named
test via the `make`/`ninja`/whatever interface; the only way to
manually invoke test `foo` is to to manually run `ctest` and specify
a regex matching `foo` as an argument, e.g. `ctest -R ^foo$`... which
is really crazy.
With this patch, it is now possible to execute any single test by name,
by invoking the build directly, e.g. to run the `universal.fish` check:
`cmake --build build --target universal.fish` or
`ninja -C build universal.fish`. Unfortunately, this is not integrated
into the Makefile wrapper, so `make universal.fish` won't work (although
this can potentially be hacked around).
Instead of compiling `fish_tests.cpp` dynamically with weakly-linked
symbols and asking it to print the list of all available tests, we
use a magic string `#define`'d as a no-op to allow CMake to regex search
for matching test groups. This speeds up configuration somewhat (by not
compiling anything), but more importantly, it's much less brittle and
doesn't involve and linker dark magic.
There's of course still no getting around the fact that it's really ugly.
* Remove safe_strerror, safe_perror and safe_append
This no longer works on new glibcs because they removed sys_errlist.
So just hardcode the relevant errno messages (and phrase them better).
Fixes#4183.
Co-authored-by: Johannes Altmanninger <aclopte@gmail.com>
Cmake accepts both absolute and relative paths in CMAKE_INSTALL_DATADIR.
For the latter case CMAKE_INSTALL_PREFIX is being prepended
automatically. %{rel_datadir} is derived from CMAKE_INSTALL_DATADIR
which was assumed to be relative and otherwise causes issues in a .pc
file where prefix is being prepended unconditionally.
Make sure %{rel_datadir} is relative by calculating RELATIVE_PATH from
CMAKE_INSTALL_PREFIX to CMAKE_INSTALL_FULL_DATADIR which is known to be
absolute.
Fixes#8150
This has cheesy pattern matching that I'm not entirely sure adds
anything?
Surely if we add something to share/web_config that should be
installed *by default*?
Anyway, let's just add .theme to it
Previously, both fish.pc and libfish had generating the
FISH-BUILD-VERSION-FILE attached as a command. In principle they could
both try to run the command simultaneously and now CMake complains about
this with the Xcode generator.
Switch to having fish.pc depend on the CHECK-FISH-BUILD-VERSION-FILE as a
target instead of a command. This allows it to participate in dependency
resolution and CMake will succeed again.
Fixes#7838
When executing “make test -jX” (with X > 1) to build and run tests in a
build directory, there is a race condition between the
serial_test_low_level target and the test_prep target (a dependency of
serial_test_fishscript and serial_test_interactive).
As far as I can tell, these events happen in a serial build scenario
(“make test” with the “Unix Makefiles” CMake generator):
1. The fish_tests binary is built and executed.
2. The test_prep target (a dependency of serial_test_fishscript)
cleans up test directories.
3. Tests in test.fish are executed.
In a parallel build scenario, this often happens:
1. Build of the fish_tests binary is started.
2. The test_prep target cleans up test directories.
3. Build of the fish_tests binary is finished.
4. Execution of the fish_tests binary starts.
5. Execution of the fish_tests binary finishes.
6. Tests in test.fish are executed.
However, if building the fish_tests binary is fast enough but not
instant (e.g. when using ccache), this can happen:
1. Build of the fish_tests binary is started.
2. Build of the fish_tests binary is finished.
3. Execution of the fish_tests binary starts.
4. The test_prep target cleans up test directories.
5. fish_tests tests that depend on said test directories may,
depending on timing, fail because they are wiped by test_prep.
Fix this by making test_prep a dependency of serial_test_low_level so
that test_prep can’t interfere with fish_tests execution.
The only thing we know ever triggered this is old macOS versions,
there's no need to use it for everyone else.
Since this uses try_run it breaks when cross-compiling, which
shouldn't be a common thing on macOS.
Fixes#7737
This is far preferable to the per-test XDG overrides that we may or may
not remember to add the next time around.
Also rename all the directories so it is clear via which variable a file
made its way into that path.
This was a typo. CMake doesn't take comma-separated arguments, but if
you do add the comma it tends to work, because it just takes that
comma as part of the string. So if it takes a directory to work in,
that it will then create, and you pass
${CMAKE_CURRENT_BINARY_DIR},
well, that might just create a "build," directory.
fish wants to build with -mmacosx-version-min=10.9. This is important
because it ensures that we do not use functions or linker features which
which are not available on 10.9. However this collides with the fact
that fish also prefers to use a pcre2 package installed on the system,
which is typically built for that system.
Mac ld will (rightly) complain when it sees a 10.9-targeted binary
linking a 10.15-targeted dylib. This is an annoying warning that gets
emitted on every build.
We could fix this either having Mac builds prefer the vendored PCRE2
by default, or by having debug builds target the system version. But
we want to continue to default to system PCRE2 and we don't want to risk
losing compatibility with older Mac versions. So we will just suppress
all linker warnings in Mac debug builds.
It's not entirely clear why the existing check does not work, but it seems to pass on clang++ even without -latomic, but causes the fish build to fail later.
Confirmed that with this change, g++ does not use -latomic, while clang++ does, and fish builds fine with both.
When CMake's own curses logic fails to find curses/ncurses, we fall back to
pkg-config and manually link the required libraries. Some platforms (RHEL 6,
see #6587) require CURSES_EXTRA_LIBRARY=tinfo, so we link against libtinfo
if it's found but are happy to continue without it if it doesn't exist.
Closes#6587
This adds a new interactive test framework based on Python's pexpect. This
is intended to supplant the TCL expect-based tests.
New tests go in `tests/pexpects/`. As a proof-of-concept, the
pipeline.expect test and the (gnarly) bind.expect test are ported to the
new framework.
The CMake variable FISH_USE_SYSTEM_PCRE2 now controls whether fish uses
system PCRE2 or the bundled version. The default is to use the system
version, unless no such version is found, or unless it is a macOS build
with code signing. Note the default behavior has not changed.
Fixes#6952
This allows all variables to be set properly when the prefix or datadir changes.
The generated .pc file looks like this:
prefix=/usr/local
datadir=${prefix}/share
completionsdir=${datadir}/fish/vendor_completions.d
functionsdir=${datadir}/fish/vendor_functions.d
confdir=${datadir}/fish/vendor_conf.d
Name: fish
Description: fish, the friendly interactive shell
URL: https://fishshell.com/
Version: 3.1.0-402-g75ae172ba228-dirty
Closes: https://bugs.archlinux.org/task/65904
Building on OS X versions prior to 10.13.6 fails at the very end when
running `codesign`.
The `-options runtime`-argument isn't available on these earlier
versions of the OS.
Simply running codesign without that argument (on OS X <10.13.6) seems
to produce a runnable binary with no security warnings.
