Commit 8a7c3ce (Don't abandon line after writing control sequences, 2024-04-06)
was broken by 29f2da8 (Toggle terminal protocols lazily, 2024-05-16), fix that.
Fixes#10529
This makes `path basename` a more useful replacement for the stock `basename`
command, which can be used with `-s .ext` to trim `.ext` from the base name.
Previously, this would have required the equivalent of
path change-extension "" (path basename $path)
but now it can be just
path basename -E $path
Mostly replacing std::<type>::MAX with <type>::MAX.
Surprising here is replacing
.expect(format!(...))
with
.unwrap_or_else(|_| panic!(...))
It explains that this is because the "format!" would always be called.
This enabled the profile in fish_setlocale, which caused startup
profile to always be on, so
```fish
fish --profile file -c 'foo'
```
would show the entire startup as well
Hex float parsing may come about through wcstod, for example:
printf "%f" '0x8p2'
should output 32.0.
Currently we use a not-great fork of hexponent. Hexponent has been dormant for
years, and has some issues: doesn't round properly, allocates unnecessarily,
doesn't handle denormals, is more complicated than necessary.
Just rewrite hex float parsing, fixing those problems and getting us off of this
weird fork.
ThreadId is way slower than it should be for the sense that we use it in; it
doesn't cache the id and allocates an Arc internally.
We don't care about the thread id used in crate::threads correlating with any
other thread id the code uses anywhere (not that it does) because it's only used
for our own bookkeeping. Change to something much simpler instead.
Verified that std::sync::OnceLock<T> compiles to the same assembly at the
*access* site as the Option<T> we were using. The additional overhead upon init
is fine. No need for extra Box<T> indirection for IO_THREAD_POOL.
While obtaining an uncontested mutex from the same thread (without reentrance)
is basically ~free, the use of `MainThread<RefCell<T>>` instead of `Mutex<T>`
makes it clear that there is no actual synchronization taking place, hopefully
making the code easier to understand.
The C++ version of this code simply copied the entire uvar table.
Today we take a reference. It's not clear which one is better.
Removal of locale variables like LC_ALL triggers variable change handlers
which call EnvStackImpl::get. This deadlocks because we still hold the lock
to protect the reference to all uvars. Work around this.
Closes#10513
It is short and simple enough to write yourself if you need it and it encourages
bad behavior by a) always returning owned strings, b) always allocating them in
a vector. If/where possible, it is better to a) use &wstr, b) use an iterator.
In rust, it's an anti-pattern to unnecessarily abstract over allocating
operations. Some of the call sites even called split_string(..).into_iter().
This updates is_windows_subsystem_for_linux() to take a WSL version to test for
(any, v1, or v2) and returns the boolean result depending on the system. I've
benchmarked and when running on regular Linux, this is still just as fast as the
previous binary check; it's only when it's WSL that this takes about 20ns
longer to figure out which variant.
Note that older WSLv2 kernels had a `-microsoft-standard` suffix while newer
ones appear to have a `-microsoft-standard-WSL2` suffix, so we make sure to test
for the least common denominator. (It doesn't matter to us, but note that newer
WSLv2 kernels have four dots in the version string!)
WSL workarounds pertaining to the default Windows terminal or executable
behavior of win32 binaries under a WSL shell are extended to WSLv2 while those
specific to oddities in kernel behavior are confined to WSLv1 only. (It
technically wouldn't hurt to extend them to WSLv2 but there's no good reason to
do so, either.)
A common complaint has been the massive amount of directories Windows appends to
$PATH slowing down fish when it attempts to find a non-existent binary (which it
does a lot more often than someone not in the know might think). The typical
workaround suggested is to trim unneeded entries from $PATH, but this a) has
considerable friction, b) breaks resolution of Windows binaries (you can no
longer use `clip.exe`, `cmd.exe`, etc).
This patch introduces a two-PATH workaround. If the cmd we are executing does
not contain a period (i.e. has no extension) it by definition cannot be a
Windows executable. In this case, we skip searching for it in any of the
auto-mounted, auto-PATH-appended directories like `/mnt/c/Windows/` or
`/mnt/c/Program Files`, but we *do* include those directories if what we're
searching for could be a Windows executable. (For now, instead of hard-coding a
list of known Windows executable extensions like .bat, .cmd, .exe, etc, we just
depend on the presence of an extension at all).
e.g. this is what starting up fish prints with logging enabled (that has been
removed):
bypassing 100 dirs for lookup of kill
bypassing 100 dirs for lookup of zoxide
bypassing 100 dirs for lookup of zoxide
bypassing 100 dirs for lookup of fd
not bypassing dirs for lookup of open.exe
not bypassing dirs for lookup of git.exe
This has resulted in a massive speedup of common fish functions, especially
anywhere we internally use or perform the equivalent of `if command -q foo`.
Note that the `is_windows_subsystem_for_linux()` check will need to be patched to
extend this workaround to WSLv2, but I'll do that separately.
Under WSL:
* Benchmark `external_cmds` improves by 10%
* Benchmark `load_completions` improves by an incredible 77%
On this binding we fail to disable CSI u
bind c-t '
begin
set -lx FZF_DEFAULT_OPTS --height 40% --bind=ctrl-z:ignore
eval fzf | while read -l r; echo read $r; end
end
'
because for "fzf", ParseExecutionContext::setup_group() returns early with the
parent process group (which should be fish's own) , hence "wants_terminal"
is false. This seems questionable, I don't think the eval should make a
difference here.
For now, don't touch it; use the more accurate way of detecting whether
a process may read keyboard input. In many of such cases "wants_terminal"
is false, like
echo (echo 1\n2\n3 | fzf)
Fixes#10504
This hot function dominates the flamegraphs for the completions thread, and any
optimizations are worthwhile.
A variety of different approaches were tested and benchmarked against real-world
fish-history file inputs and this is the one that won out across all rustc
target-cpu variations tried.
Benchmarks and code at https://github.com/mqudsi/fish-yaml-unescape-benchmark
We don't forward this variable for storage in any structs, so there's no reason
to go through an Arc instead of returning the `&'static EnvStack` directly.
NB: This particular change was safe, and passes all tests on its own.
We don't forward this variable for storage in any structs, so there's no reason
to go through an Arc instead of returning the `&'static EnvStack` directly.
These have clearer sync/unsync semantics and now ship with rust itself.
They don't paper over any possible cross-thread issues, and we can specifically
choose which we want for the purpose.
`Parser` is a single-threaded `!Send`, `!Sync` type and does not need to use
`Arc` for anything. We were using it because that's all we had for the parser's
`EnvStack`, but though that is *technically* protected internally by a mutex
(shared with global EnvStack), there's nothing to say that other parsers with a
narrower scope/lifetime on other threads will be necessarily using the same
backing mutex.
We can safely marshal the existing `Arc<EnvStack>` we get from
`environment::principal()` into an `Rc<EnvStack>` since the underlying reference
is always valid. To prove this point, we could have PRINCIPAL_STACK be a static
`EnvStack` and have `environment::principal()` use `Arc::from_raw()` to turn
that into an `Arc<EnvStack>`, but there's no need to factorize this process.
By inverting the order of storage, we can use an `OnceCell`/`unsync::Lazy`
inside the Send/Sync `MainThread<T>` and remove the need for a lock altogether.
It's reasonable since this is only checking to see that the history file
contains the expected format and if it's corrupted but we at least got what we
expect to be the correct key/value pairs, then that's all we can do.
Of course the real motivation is to speed up this very hot function in any way
possible!
On the completions and history thread, the parent function
HistoryFileContents::decode_item() is responsible for ~60% of the CPU time, and
extract_prefix_and_unescape_yaml() alone comprising 14% (of the total).
This change removes allocations in the event that the history item is either
fully or partially plain yaml with no escapes to begin with, and brings down the
execution time of this function to only 7% of the total execution time.
The bulk of the remaining time is spent in wcs2string(), which is called
unconditionally and is naturally alloc-heavy.
This allows running `set` without triggering any event handlers.
That is useful, for example, if you want to set a variable in an event
handler for that variable - we could do it, for example, in the
fish_user_path or fish_key_bindings handlers.
This is something the `block` builtin was supposed to be for, but it
never really worked because it only allows suppressing the event for
the duration, they would fire later. See #9030.
Because it is possible to abuse this, we only have a long-option so
that people see what is up.
Commit a583fe723 ("commandline -f foo" to skip queue and execute immediately,
2024-04-08) fixed the execution order of some bindings but was partially
backed out in 5ba21cd29 (Send repaint requests through the input queue again,
2024-04-19) because repainting outside toplevel yields surprising results
(wrong $status etc).
Transient prompts wants to first repaint and then execute some more readline
commands, all within a single binding. This was broken by the second commit
because that one defers the repaint until after the binding has finished.
Work around this problem by deferring input events again while a readline
event was queued. This is closest to the historical behavior.
The implementation feels hacky; we might find odd situations.
For example,
commandline -f repaint end-of-line
set token (commandline -t)
sets the wrong token.
Probably not a very important case. We could throw an error or make it work
by letting "commandline -t" drain the input queue.
That seems too complicated, better change repaints to not use the input queue
(and fake $status etc). Let's try to do that in future.
Closes#10492
[w]open_dir does not pass O_CREAT, so the mode argument to open is never used.
also, O_CREAT | O_DIRECTORY could not be used (portably) to create a directory.
(on POSIX does not specify what should happen, on Linux it is EINVAL.)
rustc 1.80 now complains about features not declared in Cargo.toml and cfg
keys/values not declared by build.rs to protect against typos or misuse (you
think you're using the right condition but you're not). See
rust-lang/cargo#10554 and rust-lang/rust#82450.
(We're not actually using TSAN under CI at this time, but I do want to re-enable
it at some point — especially if we get multithreaded execution going — using
the rust-native TSAN configuration.)
I'll be updating the `rsconf` crate and patching `build.rs` accordingly to also
handle the warnings about unknown cfg values, but tsan is a feature and not a
cfg and these can be dealt with in `Cargo.toml` directly.
We were passing a slice (and not a vec) to `CString::new()`, meaning it would
allocate a new Vec internally to hold the bytes.
Also document that the resulting CString will be silently truncated at the first
interior NUL.
The function was repeatedly calling `s.char_at(n)` which is O(1) only for UTF-32
strings (so not a problem at the moment). But it was also calling `hex_digit(n)`
twice for each `n` in the 3-digit case, causing unnecessary repeated parsing of
individual characters into their radix-16 numeric equivalents, which could be
avoided just by reusing the already calculated result.
We will continue to use the "normal" fish base directory detection when using
the CMake test harness which properly sets up a sandboxed $HOME for fish to use,
but when running source code tests with a bare `cargo test` we don't want to
write to the actual user's profile.
This also works around test failures when running `cargo test` under CI with a
locked-down $HOME directory (see #10474).
The test_history_formats test was reading from build/tests/ which is an artifact
of the cmake test runner. The source code tests should not depend on the cmake
test harness at all, so this is changed to read from the original test source in
the ./tests/ directory instead.
As documented in #10474, there are issues with 64-bit floating point rounding
under x86 targets without SSE2 extensions, where x87 floating point math causes
imprecise results.
Document the shortcoming and provide some version of the test that passes
regardless of architecture.
FISH_BUILD_DIR (nominally, ./build) is created by cmake. If you only check out
the project via git and then run `cargo build`, this directory won't exist and
many of the tests will fail.
%ld expects a 4-byte parameter on 32-bit architectures and an 8-byte parameter
on 64-bit architectures, but we supplied are trying to supply a 64-bit parameter
that would overflow 32-bit storage.
Use %lld instead which expects a `long long` parameter, which should be 8-bytes
under both architectures.
See #10474
I think given a local terminal running fish on a remote system, we can't
assume that an input sequence like \ea is sent all in one packet. (If we
could that would be perfect.)
Let's readd the default escape delay, to avoid a potential regression, but
make it only apply to raw escape bindings like "bind \e123". Treat sequences
like "bind escape,1,2,3" like regular sequences, so they can be bound on
all terminals.
This partially reverts commit b815319607.
Given "abbr foo something", the input sequence
foo<space><ctrl-z><space>
would re-expand the abbreviation on the second space which is surprising
because the cursor is not at or inside the command token. This looks to be
a regression from 00432df42 (Trigger abbreviations after inserting process
separators, 2024-04-13)
Happily, 69583f303 (Allow restricting abbreviations to specific commands
(#10452), 2024-04-24) made some changes that mean the bad commit seems no
longer necessary. Not sure why it works but I'll take it.
As reported on gitter, commands like "rm (...)" sometimes want a previous
command inside the parentheses. Let's try that. If a user actually wants
to search for a command substitution they can move the cursor outside the
command substitution, or type the search string after pressing ctrl-r?
On a command with multiline quoted string like
begin
echo "line1
line2"
end
we actually indent line2 which seeems misleading because the indentation
changes the behavior when typed into a script.
This has become more prominent since commits
- a37629f86 (fish_clipboard_copy: indent multiline commands, 2024-04-13)
- 611a0572b (builtins type/functions: indent interactively-defined functions, 2024-04-12)
- 222673f33 (edit_command_buffer: send indented commandline to editor, 2024-04-12)
which add indentation to an exported commandline.
Never indent quoted strings, to make sure the rendering matches the semantics.
Note that we do need to indent the opening quote which is fine because
it's on the same line.
While at it, indent command substitutions recursively. That feature should
also be added to fish_indent's formatting mode (which is the default).
Fortunately the formatting mode already works fine with quoted strings;
it does not indent them. Not sure how that's done and whether indentation
can use the same logic.
Given "1(23)4", this function returns an inclusive range, from the opening
to the closing parenthesis. The subcommand is extracted by incrementing
the range start and interpreting the result as an exclusive range.
This is confusing, especially if we want to add multi-character quotes.
Change it to always return the full range (including parentheses) and provide
an easy way to access the command string.
While at it, switch to returning an enum.
This change is perhaps larger and more complex than necessary (sorry)
because it is mainly made with multi-character quotes in mind. Let's see
if that works out.
This removes IsOkAnd and the is_some_and method.
I cannot actually find is_none_or in the stdlib?
I've kept the trait name to avoid changing it now and then later, maybe this should
be moved elsewhere to avoid claiming it's an stdlib thing?
After abandoning a commandline (for example with ctrl-c) it's nice to be
able to restore it. There is little reason to discard the requisite undo
information, so keep it.
This allows making something like
```fish
abbr --add gc --position anywhere --command git back 'reset --hard
HEAD^'
```
to expand "gc" to "reset --hard HEAD^", but only if the command is
git (including "command git gc" or "and git gc").
Fixes#9411
Running
echo foo | vim -
gets us in a weird situation because we put the job in fish's process groups.
It causes us to not set a PGID for this job, so it can't be resumed among
other things.
Stopping the job with ctrl-z and try to exit the shell causes a crash in the
"There are still jobs active" warning because the PID for the job is still 0.
Let's remove the assertion to restore previous behavior, and hopefully fix
this later.
Remove the last non scoped place where we disable protocols (just before
exec(1)); it's not necessary with the current approach because we always
disable inside eval.
There is an edge case where we don't:
fish -ic "exec bash"
leaving bash with CSI u enabled. Disable that also in -ic mode where we
don't have a reader.
In future we should use the same approach for restore_term_mode() but I'm
not sure which one is better.
We enable terminal protocols once at startup, and disable them before exit.
Additionally, we disable them while evaluating commands (see 8164855b7 (Disable
terminal protocols throughout evaluation, 2024-04-02))..
Thirdly, we re-enable protocols inside builtin read (where it's disabled
because we are evaluating something). All of these three are scoped and
statically guaranteed to not leak into each others scopes.
There is another place where we enable protocols non-scoped: when we
receive a notification that a job is stopped. If this is ever hit, things
will be imbalanced and we'll fail to restore the right terminal state,
or (more likely) crash due the assertion in terminal_protocols_enable().
This code path used to be necessary when we disabled protocols only while
actually executing an external command but we changed that in 8164855b7,
so it should no longer be. Remove it.
I haven't been able to find a test case, I'll try to do that later.
The main reason we changed the scope of protocols was focus reporting (#10408).
We have given up on that for now (outside tmux where I can't get it to work)
so we might want to reconsider and go back to the "optimized" approach of
enabling it for as long as possible. But this is simpler, easier to verify.
This tries to open the given file to use as stdin, and if it fails,
for any reason, it uses /dev/null instead.
This is useful in cases where we would otherwise do either of these:
```fish
test -r /path/to/file
and string match foo < /path/to/file
cat /path/to/file 2>/dev/null | string match foo
```
This both makes it nicer and shorter, *and* helps with TOCTTOU - what if the file is removed/changed after the check?
The reason for reading /dev/null instead of a closed fd is that a closed fd will often cause an error.
In case opening /dev/null fails, it still skips the command.
That's really a last resort for when the operating system
has turned out to be a platypus and not a unix.
Fixes#4865
(cherry picked from commit df8b9b7095)
This introduces a feature flag, "test-require-arg", that removes builtin test's zero and one argument special modes.
That means:
- `test -n` returns false
- `test -z` returns true
- `test -x` with any other option errors out with "missing argument"
- `test foo` errors out as expecting an option
`test -n` returning true is a frequent source of confusion, and so we are breaking with posix in this regard.
As always the flag defaults to off and can be turned on. In future it will default to on and then eventually be made read-only.
There is a new FLOG category "deprecated-test", run `fish -d deprecated-test` and it will show any test call that would change in future.
This is similar to f7dac82ed (Escape separators (colon and equals) to improve
completion, 2019-08-23) except we only escape : and = if they are the result of
file completions. This way we avoid issues with custom completions like dd.
This also means that it won't work for things like __fish_complete_suffix
[*] but that can be fixed later, once we can serialize the DONT_ESCAPE flag.
By moving the escaping step earlier, this causes some unit test changes
which should not result in actual behavior change.
See also #6099
[*]: The new \: and \= does not leak from "complete -C" because that command
unescapes its output -- unless --escape is given.
Another consequence of a583fe723 ("commandline -f foo" to skip queue
and execute immediately, 2024-04-08) is that "commandline -f repaint"
will paint the prompt with the current value of $status which might be
set from a shell command in a the currently executing binding, instead of
waiting for the top-level status. This is wrong, at least historically. It
surfaces in bindings like alt-w which always paint a status value of [1]
when on single-lines commandlines.
Another regression is that a redundant repaint in a signal handler outputs
an extra prompt.
Fix both by making repaint commands go over the input queue again. This way,
they are always run with a good commandline state. There is no need to
repaint immediately because I don't think anyone has a data dependency on it
(we currently don't expose the prompt string), it's only for rendering.
We sometimes leak ^[[I and ^[[O focus reporting events when run from VSCode's
"Run python file" button in the top right corner. To reproduce I installed
the ms-python extension set the VSCode default shell to fish and repeatedly
ran a script that does "time.sleep(1)". I believe VSCode synthesizes keys
and triggers a race condition.
We can probably fix this but I'm not sure when I'll get to it (given how
relatively unimportant this feature is).
So let's go back to the old behavior of only enabling focus reporting in tmux.
I believe that tmux is affected by the same VSCode issue (also on 3.7.1 I
think) but I haven't been able to get tmux to emit focus reporting sequences
yet. Still, keep it to not regress cursor shape (#4788). So far this is
the only motivation for focus reporting and I believe it is only relevant
for terminals that can split windows (though there are a bunch that do).
Closes#10448
While it does need to store the string, we also need to use the string after
storing it, so we aren't getting any advantage from passing by value. Just pass
by reference to simplify the call sites.
This is another problem that has been bothering me for years: as mentioned
in 1dd901e52 (Maintain cursor in history prefix search, 2024-04-12), up-arrow
search highlights search matches but the contrast is really bad, especially in
command position, because the search matches --background=brblack is combined
with whatever foreground syntax highlighting the command has. The history
pager had a similar problem (for the selected history item) but circumented
it by disabling syntax highlighting altogether for the selected item.
fish_color_search_match's foreground component is ignored.
Let's use it instead of syntax highlighting.
This fixes the contrast on some default colorschemes but the bryellow
foreground looks weirdly like an error/warning on some terminals. Change it
to white. This needs a hack because we don't have a canonical way to tell
if a uvar has been set by the user. Fortunately the foreground component
hasn't been used at all so far, so we're not so much changing it as much as
initializing it.
On Konsole with
function my-bindings
bind --preset --erase escape
bind escape,i 'echo escape i'
end
set fish_key_bindings my-bindings
the "escape,i" binding doesn't trigger. This is because of our special
handling of the escape key prefix. Other multi-key bindings like "bind j,k"
wait indefinitely for the second character. But not "escape,i"; that one
has historically had a low timeout (fish_escape_delay_ms). The motivation
is probably that we have a "escape" binding as well that shouldn't wait
indefinitely.
We can distinguish between the case of raw escape sequence binding like "\e123"
and a binding that talks about the actual escape key like "escape,i". For the
latter we don't need the special treatment of having a low timeout, so make it
fall back to "fish_sequence_key_delay_ms" which waits indefinitely by default.
When we read bytes like \xfc that don't produce a Unicode code point,
we encode them in a Unicode private use area.
This encoding should be transparent to the user.
We accidentally add it to uvar files as \uf6fc in this case. When reading
it back, read_unquoted_escape() will fail at the "fish_reserved_codepoint(c)"
check. This check is to avoid external input being misinterpreted
as one of our in-band signalling characters like ANY_CHAR (for *).
For encoded raw bytes, this check probably doesn't really matter in terms of
security because the only thing we do with these bytes is convert them back
to raw. So we could allow unescaping them at this point, thus supporting
old uvar files.
However that seems like the wrong direction. PUA encoding should never leak.
So let's instead make sure to serialize it as \xfc instead of \f6fc going
forward.
Fixes#10313
Popular operating systems support shift-delete to delete the selected item
in an autocompletion widgets. We already support this in the history pager.
Let's do the same for up-arrow history search.
Related discussion: https://github.com/fish-shell/fish-shell/pull/9515
On
a;
we don't expand the abbreviation because the cursor is right of semicolon,
not on the command token. Fix this by making sure that we call expand-abbr
with the cursor on the semicolon which is the end of the command token.
(Now that our bind command execution order is less surprising, this is doable.)
This means that we need to fix the cursor after successfully expanding
an abbreviation. Do this by setting the position explicitly even when no
--set-position is in effect.
An earlier version of this patch used
bind space self-insert backward-char expand-abbr or forward-char
The problem with that (as a failing test shows) was that given "abbr m
myabbr", after typing "m space ctrl-z", the cursor would be after the "m",
not after the space. The second space removes the space, not changing the
cursor position, which is weird. I initially tried to fix this by adding
a hack to the undo group logic, to always restore the cursor position from
when begin-undo-group was used.
bind space self-insert begin-undo-group backward-char expand-abbr end-undo-group or forward-char
However this made test_torn_escapes.py fail for mysterious reasons.
I believe this is because that test registers and triggers a SIGUSR1 handler;
since the signal handler will rearrange char events, that probably messes
with the undo group guards.
I resorted to adding a tailor-made readline cmd. We could probably remove
it and give the new behavior to expand-abbr, not sure.
Fixes#9730
File names that have lots of spaces look quite ugly when inserted as
completions because every space will have a backslash.
Add an initial heuristic to decide when to use quotes instead of
backslash escapes.
Quote when
1. it's not an autosuggestion
2. we replace the token or insert a fresh one
3. we will add a space at the end
In future we could relax some of these requirements.
Requirement 2 means we don't quote when appending to an existing token.
Need to find a natural behavior here.
Re 3, if the completion adds no space, users will probably want to add more
characters, which looks a bit weird if the token has a trailing quote.
We could relax this requirement for directory completions, so «ls so»
completes to «ls 'some dir with spaces'/».
Closes#5433
On Konsole, given
bind escape,i 'echo escape i'
bind alt-i 'echo alt-i'
pressing alt-i triggers the wrong binding. This is because we treat "escape
followed by i" as "alt-i". This is to support raw sequences like "\ei"
which are probably meant as "alt-i" -- we match such inputs to both mappings.
This double matching is not necessary for new-style bindings which
unambiguously describe the key presses, so let's activate this sequence
matching only for bindings specified as raw sequences.
Conversely, we currently fail to match an XTerm raw binding for ctrl-enter:
echo 'XTerm.vt100.formatOtherKeys: 0' | xrdb
xterm -e fish
bind \e\[27\;5\;13~ execute
because we decode this to a single char; we match the leading CSI but not
the entire sequence. So this is a raw binding where we accidentally
match full, modified keys. Fix that too (two birds with one stone).
I think commit 8386088b3 (Update commandline state changes eagerly as well,
2024-04-11) broke the alt-s binding.
This is because we update the commandline state snapshot (which is consumed
by builtin commandline and others) only at key points. This seems like a
dubious optimization. With the new streamlined bind execution semantics,
this doesn't really work anymore; any shell command can run any number of
commands like "commandline -i foo" which should synchronize.
Do the simple thing of calculating the snapshot whenever needed.
The search term highlighting looks looks really bad on the default theme
because the command is highlighted as dark blue and the search term adds
a dark background. If this new feature motivates us to finally fix this,
that would be great.
Closes#10430
The new reader_execute_readline_cmd() runs apply_commandline_state_changes()
to make sure that given
bind x "commandline --insert foo; commandline -f backward-char"
the backward-char command knows about the insertion of "foo". This
causes problems when running "sleep 1&" and typing some characters -
the commandline will be cleared when the job finishes. This is because
apply_commandline_state_changes() works with stale information in this case.
Let's call it as soon as we know it's needed. This is less messy and fits
better with the new bind function semantics ("execute things in the order
they are written").
This makes them more convenient to use interactively, similar to the existing
\c and \a versions. The resulting bind output keeps using the canonical
ctrl/alt version.
Not sure about s- because that's somewhat ambiguous, it could be "super".
See the parent commit for some context. Turns out that 8bf8b10f6 (Extended &
human-friendly keys, 2024-03-30) broke this for terminals that speak CSI u.
This is pretty complex, probably not worth it.
When a terminal sends \x1ba, that could be either escape,a or alt-a.
Historically we've handled this with an escape delay that defaults to 30
milliseconds. If we read nothing for that time, it's escape. Otherwise it's
an alt modifier (or an escape sequence).
As a side effect of 8bf8b10f6 (Extended & human-friendly keys, 2024-03-30) we
added a new way of disambiguating escape: whenever we read the escape byte,
we immediately try another (nonblocking) read. If it succeeds, we treat it
as modifier, else it's escape. Before that commit, we didn't have a concept
of modifiers.
The new way works fine for disambiguating escape,a from alt-a (as pressed
by the user) because only for alt-a the data is sent in the same packet.
So we no longer need the escape delay to disambiguate the alt from the
escape key. Let's simplify things by not using it by default.
The escape delay as set by fish_escape_delay_ms also serves another purpose;
it allows to disambiguate "escape,a" from "escape (pause) a". For that use
case we want to keep it.
As mentioned in 8a7c3ceec (Don't abandon line after writing control sequences,
2024-04-06) we need to freshed stdout timestamps after writing to stdout
but before we might redraw, in particular when writing control sequences.
Commit a583fe723 ("commandline -f foo" to skip queue and execute immediately,
2024-04-08) made "commandline -f repaint" redraw immediately, while still
executing the bound shell command; at that time we have written "disabling"
sequences but not refreshed timestamps yet, so do that.
This is probably not needed for commands outside the repaint family.
Needless to say that this is messy, maybe we can simplify things in future.
Ref https://github.com/fish-shell/fish-shell/issues/10409#issuecomment-2044863817
If a key's codepoint is in the PUA1 range, it could
be either from our own named keys (like key::Space)
or from a CSI u key that we haven't assigned a name yet
https://sw.kovidgoyal.net/kitty/keyboard-protocol/#functional-key-definitions
(The latter can still be bound using the \u1234 or the equivalent \e[4660u
raw CSI u sequence.)
It doesn't make sense to insert a PUA character into the commandline when
the user presses PrintScreen; ignore them silently.
This partially reverts b77d1d0e2 (Stop crashing on invalid Unicode input,
2024-02-27). That commit did:
1. convert input byte sequences that map to a PUA codepoint into several
characters, using our on-char-per-byte PUA encoding.
2. do the same for inputs that are codepoints outside the valid Unicode range.
3. render them as replacement character (one per input byte)
In future, we should probably remove these features altogether, and simply
ignore invalid Unicode code points.
Commit c3cd68dda (Process shell commands from bindings like regular char
events, 2024-03-02) mentions a "weird ordering difference".
The issue is that "commandline -f foo" goes through the input
queue while other commands are executed directly.
For example
bind ctrl-g "commandline -f end-of-line; commandline -i x"
is executed in the wrong order. Fix that.
This doesn't yet work for "commandline -f exit" but that can be fixed easily.
It's hard to imagine anyone would rely on the existing behavior. "commandline
-f" in bindings is mostly used for repainting the commandline.
