Inserting Tab or Backspace characters causes weird glitches. Sometimes it's
useful to paste tabs as part of a code block.
Render tabs as "␉" and so on for other ASCII control characters, see
https://unicode-table.com/en/blocks/control-pictures/. This fixes the
width-related glitches.
You can see it in action by inserting some control characters into the
command line:
set chars
for x in (seq 1 0x1F)
set -a chars (printf "%02x\\\\x%02x" $x $x)
end
eval set chars $chars
commandline -i "echo '" $chars
Fixes#6923Fixes#5274Closes#7295
We could extend this approach to display a fallback symbol for every unknown
nonprintable character, not just ASCII control characters.
In future we might want to support tab properly.
Fish functions are great for configuring fish but they don't integrate
seamlessly with the rest of the system. For tasks that can run outside fish,
writing scripts is the natural approach.
To edit my scripts I frequently run
$EDITOR (which my-script)
Would be great to reduce the amount typing for this common case (the names
of editor and scripts are usually short, so that's a lot of typing spent on
the boring part).
Our Alt+o binding opens the file at the cursor in a pager. When the cursor
is in command position, it doesn't do anything (unless the command is actually
a valid file path). Let's make it open the resolved file path in an editor.
In future, we should teach this binding to delegate to "funced" upon seeing
a function instead of a script. I didn't do it yet because funced prints
messages, so it will mess with the commandline rendering if used from
a binding. (The fact that funced encourages overwriting functions that
ship with fish is worrysome. Also I'm not sure why funced doesn't open the
function's source file directly (if not sourced from stdin). Persisting the
function should probably be the default.)
Alternative approach: I think other shells expand "=my-script" to
"/path/to/my-script". That is certainly an option -- if we do that we'd want
to teach fish to complete command names after "=". Since I don't remember
scenarios where I care about the full path of a script beyond opening it in
my editor, I didn't look further into this.
Closes#10266
gpg's --use-embedded-filename is a dangerous option that can cause gpg
to write arbitrary content to arbitrary files.
According to the GnuPG maintainer, this is not an option recommended
for use (https://dev.gnupg.org/T4500). Fish shouldn't encourage users
to supply it.
I've offered https://dev.gnupg.org/T6972 to upstream to make it even
more clear that this option is a bad idea.
While removing it, we might as well also remove
--no-use-embedded-filename, since it is effectively a no-op.
Instead of skipping for non-interactive shells, skip when stdin is not a tty.
This allows the cursor to be set for scripts that use the `read` command.
* Update just.fish to handle descriptions for completions
This change updates fish completions to also include descriptions for justfile recipes. It has been tested with descriptions for recipes with arguments as well
* rely on fish only (avoid sed)
Fix cases like
eval my-cmd (commandline -o)
complete -C "my-cmd $(commandline -o)"
In both cases, we spuriously evaluate tokens like "(inside-quoted-string)"
as command substitutions. Fix this by escaping the strings. The momentarily
regresses the intended purpose of "eval" -- to expand variables -- but the
next commit will fix that.
Issue #10194 reports Cobra completions do
set -l args (commandline -opc)
eval $args[1] __complete $args[2..] (commandline -ct | string escape)
The intent behind "eval" is to expand variables and tildes in "$args".
Fair enough. Several of our own completions do the same, see the next commit.
The problem with "commandline -o" + "eval" is that the former already
removes quotes that are relevant for "eval". This becomes a problem if $args
contains quoted () or {}, for example this command will wrongly execute a
command substituion:
git --work-tree='(launch-missiles)' <TAB>
It is possible to escape the string the tokens before running eval, but
then there will be no expansion of variables etc. The problem is that
"commandline -o" only unescapes tokens so they end up in a weird state
somewhere in-between what the user typed and the expanded version.
Remove the need for "eval" by introducing "commandline -x" which expands
things like variables and braces. This enables custom completion scripts to
be aware of shell variables without eval, see the added test for completions
to "make -C $var/some/dir ".
This means that essentially all third party scripts should migrate from
"commandline -o" to "commandline -x". For example
set -l tokens
if commandline -x >/dev/null 2>&1
set tokens (commandline -xpc)
else
set tokens (commandline -opc)
end
Since this is mainly used for completions, the expansion skips command
substitutions. They are passed through as-is (instead of cancelling or
expanding to nothing) to make custom completion scripts work reasonably well
in the common case. Of course there are cases where we would want to expand
command substitutions here, so I'm not sure.
We're already moving them, we can remove the awkward dot that hides
them, and while we're doing that remove the useless $USER as well.
Most systems will have only one of these files - it's rare to run a
second package manager (especially for anything more than
bootstrapping a container).
These take a *lot* of time - `pip3` takes 180ms, `pipenv` takes 320ms
on my system.
Note that this removes a number of obsolete workarounds - pip's was
fixed in 2017 (and pip2 is less and less of a thing), pipenv's change
was in 2019.
Since these are packaging tools with access to the internet they
should really be kept up-to-date, so it is unlikely someone still uses
these old versions.
We have a lot of completions that look like
```fish
pip completion --fish 2>/dev/null | source
```
That's *fine*, upstream gives us some support.
However, the scripts they provide change very rarely, usually not even
every release, and so running them again for every shell is extremely
wasteful.
In particular the python tools are very slow, `pip completion --fish`
takes about 180ms on my system with a hot cache, which is quite
noticeable.
So what we do is we run them once, store them in a file in our cache
directory, and then serve from that.
We store the mtime of the command we ran, and compare against that for
future runs. If the mtime differs - so if the command was up or
downgraded, we run it again.
This will move all current cache uses to e.g. ~/.cache/fish/
That's better anyway because it makes it easier to remove.
Also it allows supplying a subdir so you can do `__fish_make_cache_dir
completions`
to get ~/.cache/fish/completions.
If I alias "e" to "emacsclient" it will probably accept the same options.
Let's dereference the alias so we can detect support for passing the cursor
position in more cases.
This does not solve the problem for recursive cases (e.g. alias of another
alias). If we want to handle that we would need cycle detection.
Some of the completions recently introduced called Blender itself to query some
arguments, and Blender sometimes prints messages to stderr. This output was not
filtered, resulting in the shell printing irrelevant messages during completion.
- Replace short options with old-style options: even though they are
single-letter, Blender's options cannot be combined.
- Add comments to separate blocks of options, mirroring Blender's help message.
- Add missing options: render-frame, python-use-system-env, register-allusers,
unregister, unregister-allusers.
- Remove options: debug-gpu-disable-ssbo, debug-gpu-renderdoc, -R.
- Fix typos:
- debug-depsgraph-eval (was -evel)
- debug-depsgraph-pretty (was -time)
- app-template (was open-last)
- Update output formats:
- Add descriptions.
- Add HDR, TIFF, OpenEXR, OpenEXR Multilayer, FFmpeg, Cineon, DPX, JPEG 2000,
and WebP, which are optional but generally available.
- Remove IRIZ, which is no longer available.
- Fix arguments for --use-extension: they should be 0 or 1, not true or false.
- Make env-system-* options require a parameter.
- Improve --add-ons by querying the list of add-ons inside Blender rather than a
hardcoded path. This is because Blender's add-on modules may come from many
different paths which depend on platform.
- Fix __blender_echo_input_file_name, by relying on extension.
- Fix listing of scene datablocks inside Blend file.
- Add listing of Python text datablocks to execute inside Blend file.
Closes#10150
