Limit the fish_wcstod fast path to ASCII digits only, to fix the problem
observed in the discussion for a700acadfa
where LANG=de_DE.UTF-8 would cause `test` to interpret commas instead of
periods inside floating point values.
Now jobs are aware of their parent jobs, and can interrogate those jobs,
to determine if every job in the chain is fully constructed.
Remove flags and the static stacks that manipulated them.
The parent of a job is the parent pipeline that executed the function or
block corresponding to this job. This will help simplify
process_mark_finished_children().
Prior to this fix, cding into a symlink and then completing .. would complete
from the physical directory instead of the logical directory, which could not
actually be cd'd to. Teach cd completiond to use the logical directory.
select_try() returned IO_ERROR to indicate that there's no file descriptors
from which to read. Name this return value properly.
Also migrate this type into proc.cpp since it's not used outside of the
header.
This is an opposite case from the usual "pipe into grep-the-function"
where my `pbpaste` emitted a lot of content exceeding the OS pipe
buffer. The `block_on_fg` condition was just `send_sigcont` in the
original job control rewrite, and it was incorrect to sub it for
WAIT_BY_PROCESS on its own.
However, this requires always blocking when select_try returns an
interrupted/incomplete read or else fish doesn't block and stays running
in a tight loop in the background (and incorrectly writing to a terminal
it doesn't own under higher debug levels), which I *think* is OK.
Instantiate the std:locale instance used within the character comparison
callback outside the lambda and take a reference to it instead of
creating the locale object for each character in the sequence.
This is part of a very tight loop with lots of inputs during the
evaluation of fuzzy string matches for completions/autosuggestions and
is worth optimizing.
This was introduced in 1b1bc28c0a but did
not cause any problems until the job control refactor, which caused it
to attempt to signal the calling `exec` builtin's own (invalid) pgrp
with SIGHUP.
Also improved debugging for `j->signal()` failures by printing the
signal we tried sending in case of error, rename the function to
`hup_background_jobs`, and move it from `reader.h`/`reader.cpp` to
`proc.h`/`proc.cpp`.
When a function is encountered by exec_job, a new context is created for
its execution from the ground up, with a new job and all, ultimately
resulting in a recursive call to exec_job from the same (main) thread.
Since each time exec_job encounters a new job with external commands
that needs terminal control it creates a new pgrp and gives it control
of the terminal (tcsetpgrp & co), this effectively takes control away
from the previously spawned external commands which may be (and likely
are) expecting to still have terminal access.
This commit attempts to detect when such a situation arises by handling
recursive calls to exec_job (which can only happen if the pipeline
included a function) by borrowing the pgrp from the (necessarily still
active) parent job and spawning new external commands into it.
When a parent job spawns new jobs due to the evaluation of a new
function (which shouldn't be the case in the first place), we end up
with two distinct jobs sharing one pgrp (to fix#3952). This can lead to
early termination of a pgrp if finished parent job children are reaped
before future processes in either the parent or future child jobs can
join it.
While the parent job is under construction, require that waitpid(2)
calls for the child job be done by process id and not job pgrp.
Closes#3952.
Use SIGCHLD to determine whether or not waitpid(2) calls can be elided,
but only with extreme caution. If we receive SIGCHLD but are not able to
reap all jobs, we need to iterate through them again.
For this to work, we need to make sure that we reap all children that we
can reap after a SIGCHLD, i.e. it's not OK to just reap the first and
return or else we can never clear the dirty state flag.
In all cases, as expensive as a call to waitpid() may be, if a child
process is available for reaping it is always cheaper to wait on it then
reap it than to call select_try() and end up timing out.
The old code was rather haphazard with regards to error control, and
would make mutable changes before operations that could fail without any
viable error handling options.
Convert `select_try()` to return a well-defined enum describing its
state, and handle each of the three possible cases with clear reasons
why we are blocking or not blocking in each subsequent call to
`process_mark_finished_children()`.
* Use the newly-introduced signal_block_t RAII wrapper
* Remove EINTR loops as all signals are blocked
* Clean up control flow thanks to RAII wrappers
* Rename parameter to clarify what it does and update docs accordingly
* Update outdated comments referencing SIGSTOP code that was removed a
long time ago.
* Remove no-op CHECK_BLOCK() call
* Convert JOB_* enums to scoped enums
* Convert standalone job_is_* functions to member functions
* Convert standalone job_{promote, signal, continue} to member functions
* Convert standolen job_get{,_from_pid} to `job_t` static functions
* Reduce usage of JOB_* enums outside of proc.cpp by using new
`job_t::is_foo()` const helper methods instead.
This patch is only a refactor and should not change any functionality or
behavior (both observed and unobserved).
* Debug level 3: describe all commands being executed (this is, after all,
a shell and one can argue that this is the most important debug
information avaliable)
* Debug level 4: details of execution, mainly fork vs no-fork and io
handling
Also introduced j->preview() to print a short descriptor of the job
based on the head of the first process so we don't overwhelm with
needless repitition, but also so that we don't have to rely on
distinguishing between repeated, non-unique/non-monotonic job ids that
are often recycled within a single "execution cycle" (pressing enter
once).
Per @ridiculousfish's suggestions in #5219,
`process_mark_finished_children()` has been updated to work in an easier-
to-follow manner. Its behavior is now straight forward, it always checks
for finished processes but only blocks if `block_on_fg` is true.
We're not using the SIGCHLD count in s_sigchld_generation_cnt for
anything any more, as it's not actually a reliable metric since we can
experience one SIGCHLD as a result of two processes exiting (see #1768),
but only reap one of them if the other is in a not-fully-constructed job
(see #5219), a state we cannot possibly detect without calling
`waitpid()` on all child processes, which we are explicitly avoiding.
We never insert elements into the middle of a job list, only move
elements to the top. While that can be done "efficiently" with a list, it
can be done faster with a deque, which also won't thrash the cache when
enumerating over jobs.
This speeds up enumeration in the critical path in
`process_mark_finished_children()`.
* Instead of reaping all child processes when we receive a SIGCHLD, try
reaping only processes belonging to process groups from fully-
constructed jobs, which should eliminate the need for the keepalive
process entirely (WSL's lack of zombies not withstanding) as now
completed processes are not reaped until the job has been fully
constructed (i.e. all processes launched), which means their process
group should still be around for new processes to join.
* When `tcgetpgrp()` calls return 0, attempt to `tcsetpgrp()` before
invoking failure handling code.
* When forking a builtin and not running interactively, do not bail if
unable to set/restore terminal attributes.
Fixes#4178. Fixes#3805. Fixes#5210.
This is to avoid development versions of fish 3.0 freaking out when the
file format is changed. We now have better support for for future universal
variable formats so it's unlikely we'll have to change the file name again.
In private mode, access to previous history is blocked and new history
does not persist and is only available for the duration of the current
session.
This mode can be used when it is not desirable for commandline history
to leak into a session, e.g. via autocomplete or when it is desirable to
test the behavior of fish in the absence of history items without
permanently clearing the history.
I'm sure there are a lot more features that can be incorporated into
private mode, such as restricting access to certain user-specific
configuration files, etc.
This addresses a lot of the concerns raised in #1363 (which was later
changed to track mosh-specific problems). See also #102.
When we discard output because there's been too much, we print a
warning, but subsequent uses of the same buffer still discard.
Now we explicitly reset the flag, so we warn once and everything works
normal after.
Fixes#5267.
For things like
source $undefined
or
source (nooutput)
it was quite annoying that it read from tty.
Instead we now require a "-" as the filename to read from the tty.
This does not apply to reading from stdin if it's redirected, so
something | source
still works.
Fixes#2633.
This adds flags --path and --unpath to builtin set, analogous to
--export and --unexport. These flags change whether a variable is
marked as a path variable.
Universal variables cannot yet be path variables.
This switches quoted expansion like "$foo" to use foo's delimiter instead of
space. The delimiter is space for normal variables and colonf or path variables.
Expansions like "$PATH" will now expand using ':'.
This commit begins to bake in a notion of path-style variables.
Prior to this fix, fish would export arrays as ASCII record separator
delimited, except for a whitelist (PATH, CDPATH, MANPATH). This is
surprising and awkward for other programs to deal with, and there's no way
to get similar behavior for other variables like GOPATH or LD_LIBRARY_PATH.
This commit does the following:
1. Exports all arrays as colon delimited strings, instead of RS.
2. Introduces a notion of "path variable." A path variable will be
"colon-delimited" which means it gets colon-separated in quoted expansion,
and automatically splits on colons. In this commit we only do the exporting
part.
Colons are not escaped in exporting; this is deliberate to support uses
like
`set -x PYTHONPATH "/foo:/bar"`
which ought to work (and already do, we don't want to make a compat break
here).
This reverts commit 3f820f0edf.
While the premise described by @nbuwe is sound in #4505, we are now
apparently relying on this behavior is some places (although
inadvertently as there doesn't seem to be a deliberate acknowledgement
of that anywhere).
Turning off ONLCR causes things like indented multiline commands to not
appear correct at the tty (subsequent lines appear both at column 0 and
again indented).
Per @nbuwe's excellent explanation in #4505, we can save on output
to the tty by maintaining column location after NL by disabling the
ONLCR terminal mode.
Closes#4505.
Adds a new match mode for `string_fuzzy_match_t` that matches against a
case-insensitive subsequence within a string, e.g. `LL` now (partially)
matches against `hello`. This is implemented as a separate mode, given a
lower priority of match than a same-case match (when present).
Note that `fuzzy_match_subsequence_insertions_only` has purposely not
been extended with a case-insensitive version as that would be a)
unlikely to match often, and b) adding a second inefficient fuzzy search
to something that's queried a lot. Perhaps `subsequence_insertions_only`
can simply be changed to be a case-insensitive comparison in the future?
Closes#1196. Affects #3978.
Load fish docs and configuration out of the source and/or build
directories rather from the installed paths when running directly out
of the cmake build directory.
Closes#5255.
Prior to this fix, fish would swallow SIGINT in non-interactive mode. This
meant that scripts could only be Ctrl-C'd if fish was executing an external
command.
Unblock SIGINT in non-interactive mode.
Fixes#5253
Fixes broken macOS build. I'm not sure how the code used to compile
without including `dyld.h` previously, perhaps a different header used
to pull it in?
Retrieves the fully resolved path to the currently executing fish binary
(regardless of PATH). Can be used to ensure that the same fish is
launched again from a script.
`get_executable_path()` moved from fish binary to libfish, also cleaned
up some duplicated (but differing!) definitions of PATH_MAX (which was
used by that function) in the process.
Remove dependency on the Linux compatibility layer's procfs being
installed and mounted when running under FreeBSD by directly querying
the MIB for the path to the running fish executable
(KERN_PROC_PATHNAME). Tested under FreeBSD 11.2-RELEASE.
This switches fish to a "virtual" PWD, where it no longer uses getcwd to
discover its PWD but instead synthesizes it based on normalizing cd against
the $PWD variable.
Both pwd and $PWD contain the virtual path. pwd is taught about -P to
return the physical path, and -L the logical path (which is the default).
Fixes#3350
This new function performs normalization of paths including dropping
/./ segments, and resolving /../ segments, in preparation for switching
fish to a "virtual" PWD.
Mostly resolves#4862, though there remains the lingering question of
whether or not to emit a warning to /dev/tty or stderr when a
non-literal-zero index evaluates to zero.
Coalesces commands with leading (if even possible) and trailing
whitespace into the same item, improving the experience when iterating
over history entries.
Closes#4908.
This allows for marking certain bindings as part of a preset, which allows us to
- only erase those when switching presets
- go back to the preset binding when erasing a user binding
- only show user customization if requested
- make bare bind statements in config.fish work (!!!11elf!!!)
Fixes#5191.
Fixes#3699.
This reverts commit 8c14f0f30f.
This list is not reliable - there are many ways for fish to quit that does not
invoke these functions. It's also not necessary since the history is correctly
saved on exec.
Prior to this change, env_get_pwd_slash() would try to infer the PWD from
getcwd() if $PWD were missing. But this results env_get_pwd_slash() doing
something radically different than $PWD, and also is a lot of code for a
scenario that cannot be reliably reproduced. Just return "/" in this case.
If the replacement in `string replace` is invalid, prior to this fix we would
enter into an infinite loop trying to parse it. Instead report errors correctly.
Fixes#3381
Rather than having tokenizer_error as pointers to objects, switch it back
to just an error code value. This makes reasoning about it easier since
it's immutable values instead of mutable objects, and it avoids allocation
during startup.
At some point the completion code was refactored and in the event where
no explicit function description was passed into `resolve_description()`
it would attempt to use the `desc_func` parameter but pass in the
_remaining_ part of the completion rather than the full text, which
would obviously fail.
e.g. if completing `foo<TAB>`, for function `foobar` it would attempt to
find the description for a function named `bar` instead of `foobar`.
Closes#5206.
This reverts commit 9c63ad3209 until I can
figure out what is causing the assertion and test failures.
It *seems* to be that passing in the correct function name to the
description lookup is causing a previously present error to be realized,
but I can't yet be certain.
At some point the completion code was refactored and in the event where
no explicit function description was passed into `resolve_description()`
it would attempt to use the `desc_func` parameter but pass in the
_remaining_ part of the completion rather than the full text, which
would obviously fail.
e.g. if completing `foo<TAB>`, for function `foobar` it would attempt to
find the description for a function named `bar` instead of `foodbar`.
Closes#5206.
There's been no reproducible case entered for #5080, but the stack trace
indicates the problem is with env_get_pwd_slash() returning an empty
string, which isn't a string that terminates in `/`.
In addition to making the failure case to return the path `./` (which
has the benefit of having the same meaning as $PWD), trying a little bit
harder to retrieve the real PWD by using getcwd(3). While
get_current_dir(3) is documented as relying on PWD, getcwd(3) does not
mention any such caveats, so it's possible that it will work even if
something is breaking PWD.
Just a thought, but it's possible if due to some recursion PWD surpassed
some predetermined value (maybe PATH_MAX) that PWD (on certain platforms
or under certain enivronments) won't be set (hence the code that deals
with ERANGE errors from the getcwd(3) call).
Closes#5080.
As reported in fish-shell/fish-shell#5180, when the USER environment
variable is not set and fish is started, `get_runtime_path()` returns a
blank string. At some point in the past, this was called after
`setup_user()` in env.cpp, but this is no longer the case.
This commit removes the reliance on the $USER environment variable
entirely, and instead uses `getpwuid(geteuid()).pw_name` to retrieve the
current username.
Closes#5180.
