Some of these handled multiline prompts but not multiline command lines. We
first need to move the cursor to the end of the commandline, then we can
print a message. Finally, we need to move the cursor back to where it was.
Commit c3cd68dda (Process shell commands from bindings like regular char
events, 2024-03-02) mentions a "weird ordering difference".
The issue is that "commandline -f foo" goes through the input
queue while other commands are executed directly.
For example
bind ctrl-g "commandline -f end-of-line; commandline -i x"
is executed in the wrong order. Fix that.
This doesn't yet work for "commandline -f exit" but that can be fixed easily.
It's hard to imagine anyone would rely on the existing behavior. "commandline
-f" in bindings is mostly used for repainting the commandline.
This allows terminals like foot and kitty to
* scroll to the previous/next prompt with ctrl-shift-{z,x}
* pipe the last command's output to a pager with ctrl-shift-g
Kitty has existing fish shell integration
shell-integration/fish/vendor_conf.d/kitty-shell-integration.fish which we
can simplify now. They keep a state variable to decide which of prompt start,
command start or command end to output. I think with our implementation
this is no longer necessary, at least I couldn't reproduce any difference.
We also don't need to hook into fish_cancel or fish_posterror like they do;
only in the one place where we actually draw the prompt.
As mentioned in the above shell integration script, kitty disables reflow
when it sees an OSC 133 marker, so we need to do it ourselves,
otherwise the prompt will go blank after a terminal resize.
Closes#10352
Some terminals send the focus-in sequences ("^[I") whenever focus reporting is
enabled. We enable focus reporting whenever we are finished running a command.
If we run two commands without reading in between, the focus sequences
will show up on the terminal.
Fix this by enabling focus-reporting as late as possible.
This fixes the problem with `^[I` showing up when running "cat" in
gnome-terminal https://github.com/fish-shell/fish-shell/issues/10411.
This begs the question if we should do the same for CSI u and bracketed paste.
It's difficult to answer that; let's hope we find motivating test cases.
If we enable CSI u too late, we might misinterpret key presses, so for now
we still enable those as early as possible.
Also, since we now read immediately after enabling focus events, we can get
rid of the hack where we defer enabling them until after the first prompt.
When I start a fresh terminal, the ^[I no longer shows up.
Similar to 20bbdb68f (Set terminal title unconditionally, 2024-03-30).
While at it, get rid of a few unnecessary guards (we are never called from
a command substitution, so the check only adds confusion).
See the changelog additions for user-visible changes.
Since we enable/disable terminal protocols whenever we pass terminal ownership,
tests can no longer run in parallel on the same terminal.
For the same reason, readline shortcuts in the gdb REPL will not work anymore.
As a remedy, use gdbserver, or lobby for CSI u support in libreadline.
Add sleep to some tests, otherwise they fall (both in CI and locally).
There are two weird failures on FreeBSD remaining, disable them for now
https://github.com/fish-shell/fish-shell/pull/10359/checks?check_run_id=23330096362
Design and implementation borrows heavily from Kakoune.
In future, we should try to implement more of the kitty progressive
enhancements.
Closes#10359
Terminal titles are set with an OSC 0 sequence. I don't think we want to
support terminals that react badly to unknown OSC (or CSI) sequences.
So let's remove our feature detection.
This will fix future false negatives along the lines of
https://github.com/fish-shell/fish-shell/pull/10037
A long standing issue is that bindings cannot mix special input functions
and shell commands. For example,
bind x end-of-line "commandline -i x"
silently does nothing. Instead we have to do lift everything to shell commands
bind x "commandline -f end-of-line; commandline -i x"
for no good reason.
Additionally, there is a weird ordering difference between special input
functions and shell commands. Special input functions are pushed into the
the queue whereas shell commands are executed immediately.
This weird ordering means that the above "bind x" still doesn't work as
expected, because "commandline -i" is processed before "end-of-line".
Finally, this is all implemented via weird hack to allow recursive use of
a mutable reference to the reader state.
Fix all of this by processing shell commands the same as both special input
functions and regular chars. Hopefully this doesn't break anything.
Fixes#8186Fixes#10360Closes#9398
Multiline search strings are weirdly broken (inserting control characters
in the command line) and probably not very useful anyway.
On the other hand I often want to compose a multi-line command
from single-line commands I ran previously.
Let's support this case by limiting the initial search string to the current
line; and replace only that line.
Alternatively this could operate on jobs (that is, replace a surrounding
"foo | bar") instead of using line boundaries.
I used below script to list all GitHub issues and PRs that are not yet
mentioned in the changelog. It's almost empty now.
While at it, curate the "notable" section and move some entries around,
notably from "interactive improvements" to "bindings".
```shell
ms="fish next-3.x"
{
gh issue list --state closed --milestone "$ms" -L 500
gh pr list --state all --search "milestone:\"$ms\"" -L 500
} | sort -n | while IFS='
' read line; do
set -- $line
grep -qE '\W'$1 CHANGELOG.rst ||
echo https://github.com/fish-shell/fish-shell/issues/$1 "$line"
done
```
Unless the editor changed to a different file for some reason.
Note that the Kakoune integration uses -always to export the cursor even if
the user temporarily suppressed hooks - possibly a "fish_indent" hook.
Inserting Tab or Backspace characters causes weird glitches. Sometimes it's
useful to paste tabs as part of a code block.
Render tabs as "␉" and so on for other ASCII control characters, see
https://unicode-table.com/en/blocks/control-pictures/. This fixes the
width-related glitches.
You can see it in action by inserting some control characters into the
command line:
set chars
for x in (seq 1 0x1F)
set -a chars (printf "%02x\\\\x%02x" $x $x)
end
eval set chars $chars
commandline -i "echo '" $chars
Fixes#6923Fixes#5274Closes#7295
We could extend this approach to display a fallback symbol for every unknown
nonprintable character, not just ASCII control characters.
In future we might want to support tab properly.
Fish functions are great for configuring fish but they don't integrate
seamlessly with the rest of the system. For tasks that can run outside fish,
writing scripts is the natural approach.
To edit my scripts I frequently run
$EDITOR (which my-script)
Would be great to reduce the amount typing for this common case (the names
of editor and scripts are usually short, so that's a lot of typing spent on
the boring part).
Our Alt+o binding opens the file at the cursor in a pager. When the cursor
is in command position, it doesn't do anything (unless the command is actually
a valid file path). Let's make it open the resolved file path in an editor.
In future, we should teach this binding to delegate to "funced" upon seeing
a function instead of a script. I didn't do it yet because funced prints
messages, so it will mess with the commandline rendering if used from
a binding. (The fact that funced encourages overwriting functions that
ship with fish is worrysome. Also I'm not sure why funced doesn't open the
function's source file directly (if not sourced from stdin). Persisting the
function should probably be the default.)
Alternative approach: I think other shells expand "=my-script" to
"/path/to/my-script". That is certainly an option -- if we do that we'd want
to teach fish to complete command names after "=". Since I don't remember
scenarios where I care about the full path of a script beyond opening it in
my editor, I didn't look further into this.
Closes#10266
Version 2.1.0 introduced subsequence matching for completions but as the
changelog entry mentions, "This feature [...] is not yet implemented for
options (like ``--foobar``)". Add it. Seems like a strict improvement,
pretty much.
Issue #10194 reports Cobra completions do
set -l args (commandline -opc)
eval $args[1] __complete $args[2..] (commandline -ct | string escape)
The intent behind "eval" is to expand variables and tildes in "$args".
Fair enough. Several of our own completions do the same, see the next commit.
The problem with "commandline -o" + "eval" is that the former already
removes quotes that are relevant for "eval". This becomes a problem if $args
contains quoted () or {}, for example this command will wrongly execute a
command substituion:
git --work-tree='(launch-missiles)' <TAB>
It is possible to escape the string the tokens before running eval, but
then there will be no expansion of variables etc. The problem is that
"commandline -o" only unescapes tokens so they end up in a weird state
somewhere in-between what the user typed and the expanded version.
Remove the need for "eval" by introducing "commandline -x" which expands
things like variables and braces. This enables custom completion scripts to
be aware of shell variables without eval, see the added test for completions
to "make -C $var/some/dir ".
This means that essentially all third party scripts should migrate from
"commandline -o" to "commandline -x". For example
set -l tokens
if commandline -x >/dev/null 2>&1
set tokens (commandline -xpc)
else
set tokens (commandline -opc)
end
Since this is mainly used for completions, the expansion skips command
substitutions. They are passed through as-is (instead of cancelling or
expanding to nothing) to make custom completion scripts work reasonably well
in the common case. Of course there are cases where we would want to expand
command substitutions here, so I'm not sure.
If I alias "e" to "emacsclient" it will probably accept the same options.
Let's dereference the alias so we can detect support for passing the cursor
position in more cases.
This does not solve the problem for recursive cases (e.g. alias of another
alias). If we want to handle that we would need cycle detection.
Commit 5f849d0 changed control-C to print an inverted ^C and then a newline.
The original motivation was
> In bash if you type something and press ctrl-c then the content of the line
> is preserved and the cursor is moved to a new line. In fish the ctrl-c just
> clears the line. For me the behaviour of bash is a bit better, because it
> allows me to type something then press ctrl-c and I have the typed string
> in the log for further reference.
This sounds like a valid use case in some scenarios but I think that most
abandoned commands are noise. After all, the user erased them. Also, now that
we have undo that can be used to get back a limited set of canceled commands.
I believe the original motivation for existing behavior (in other shells) was
that TERM=dumb does not support erasing characters. Similarly, other shells
like to leave behind other artifacts, for example when using tab-completion
or in their interactive menus but we generally don't.
Control-C is the obvious way to quickly clear a multi-line commandline.
IPython does the same. For the other behavior we have Alt-# although that's
probably not very well-known.
Restore the old Control-C behavior of simply clearing the command line.
Our unused __fish_cancel_commandline still prints the ^C. For folks who
have explicitly bound ^C to that, it's probably better to keep the existing
behavior, so let's leave this one.
Previous attempt at #4713 fizzled.
Closes#10213
By default, fish does not complete files that have leading dots, unless the
wildcard itself has a leading dot. However this also affected completions;
for example `git add` would not offer `.gitlab-ci.yml` because it has a
leading dot.
Relax this for custom completions. Default file expansion still
suppresses leading dots, but now custom completions can create
leading-dot completions and they will be offered.
Fixes#3707.
(cherry picked from commit b7de768c73)
The existing subsequence search commonly returns false positives.
Support globs, to allow searching for disconnected substrings in a better way.
Closes#10143Closes#10131
Padding with an unprintable character is now disallowed, like it was for other
zero-length characters.
`string shorten` now ignores escape sequences and non-printable characters
when calculating the visible width of the ellipsis used (except for `\b`,
which is treated as a width of -1).
Previously `fish_wcswidth` returned a length of -1 when the ellipsis-str
contained any non-printable character, causing the command to poentially
print a larger width than expected.
This also fixes an integer overflows in `string shorten`'s
`max` and `max2`, when the cumulative sum of character widths turned negative
(e.g. with any non-printable characters, or `\b` after the changes above).
The overflow potentially caused strings containing non-printable characters
to be truncated.
This adds test that verify the fixed behaviour.
* feat(completions): support Krita
* feat(completions): support summary options for Krita
* feat(completions): support remaining options for Krita
* feat(completions): remove debug instructions
* feat(completions): hide completions for sizes for Krita
* feat(completions): fix Krita
* feat(changelog): mention new completion
* fix(completions): refactor Krita
* fix(completion): reformat
* feat(completion): dynamically generate workspace list
* fix(completion): refactor
* fix(completion): krita
* fix(completions): use printf
We could end up overflowing if we print out something that's a multiple of the
chunk size, which would then finish printing in the chunk-printing, but not
break out early.
Add completions for ssh-copy-id.
Refactored __ssh_history_completions into its own file for autoloading across
completions.
(cherry picked from commit 45b6622986)
Conflicts:
CHANGELOG.rst
