Turns out doing `==` on Enums with values will do a deep comparison,
including the values.
So EventDescription::Signal(SIGTERM) is !=
EventDescription::Signal(SIGWINCH).
That's not what we want here, so this does a bit of a roundabout thing.
Padding with an unprintable character is now disallowed, like it was for other
zero-length characters.
`string shorten` now ignores escape sequences and non-printable characters
when calculating the visible width of the ellipsis used (except for `\b`,
which is treated as a width of -1).
Previously `fish_wcswidth` returned a length of -1 when the ellipsis-str
contained any non-printable character, causing the command to poentially
print a larger width than expected.
This also fixes an integer overflows in `string shorten`'s
`max` and `max2`, when the cumulative sum of character widths turned negative
(e.g. with any non-printable characters, or `\b` after the changes above).
The overflow potentially caused strings containing non-printable characters
to be truncated.
This adds test that verify the fixed behaviour.
- Add test to verify piped string replace exit code
Ensure fields parsing error messages are the same.
Note: C++ relied upon the value of the parsed value even when `errno` was set,
that is defined behaviour we should not rely on, and cannot easilt be replicated from Rust.
Therefore the Rust version will change the following error behaviour from:
```shell
> string split --fields=a "" abc
string split: Invalid fields value 'a'
> string split --fields=1a "" abc
string split: 1a: invalid integer
```
To:
```shell
> string split --fields=a "" abc
string split: a: invalid integer
> string split --fields=1a "" abc
string split: 1a: invalid integer
```
We could end up overflowing if we print out something that's a multiple of the
chunk size, which would then finish printing in the chunk-printing, but not
break out early.
This makes `fish -c begin` fail with a status of 127 - it already
printed a syntax error so that was weird. (127 was the status for
syntax errors when piping to fish, so we stay consistent with that)
We allow multiple `-c` commands, and this will return the regular
status if the last `-c` succeeded.
This is fundamentally an extremely weird situation but this is the
simple targeted fix - we did nothing, unsuccessfully, so we should
fail.
Things to consider in future:
1. Return something better than 127 - that's the status for "unknown
command"!
2. Fail after a `-c` failed, potentially even checking all of them
before executing the first?
Fixes#9888
This restores the status quo where builtins are like external commands
in that they can't see anything after a 0x00, because that's the c-style
string terminator.
* Make NULs work for builtins
This switches from passing a c-string to output_stream_t::append to
passing a proper string.
That means a builtin that prints a NUL no longer crashes with "thread '' panicked
at 'String contained intermediate NUL character: ".
Instead, it will actually handle the NUL, even as an argument.
That means something like
`echo foo\x00bar` will now actually print a NUL instead of truncating
after the `foo` because we passed c-strings around everywhere.
The former is *necessary* for e.g. `string`, the latter is a change
that on the whole makes dealing with NULs easier, but it is a
behavioral change.
To restore the c-string behavior we would have to truncate arguments
at NUL.
See #9739.
* Use AsRef instead of trait bound
This caused math to assert out because it never wrote into the buffer.
Now, presumably it wrote somewhere but I don't know where, so fixing
this seems like a good idea.
Fixes#9735.
Most of it is duplicated, hence untested.
Functions like mbrtowc are not exposed by the libc crate, so declare them
ourselves.
Since we don't know the definition of C macros, add two big hacks to make
this work:
1. Replace MB_LEN_MAX and mbstate_t with values (resp types) that should
be large enough for any implementation.
2. Detect the definition of MB_CUR_MAX in the build script. This requires
more changes for each new libc. We could also use this approach for 1.
Additionally, this commit brings a small behavior change to
read_unquoted_escape(): we cannot decode surrogate code points like \UDE01
into a Rust char, so use � (\UFFFD, replacement character) instead.
Previously, we added such code points to a wcstring; looks like they were
ignored when printed.
Otherwise this would complete
`git --exec-path=foo`, by running `complete -C"'' --exec-path=foo"`,
which would print "--exec-path=foo", and so it would end as
`git --exec-path=--exec-path=foo` because the "replaces token" bit was
lost.
I'm not sure how to solve it cleanly - maybe an additional option to
`complete`?
Anyway, for now this
Fixes#9538.
Another from the "why are we asserting instead of doing something
sensible" department.
The alternative is to make exit() and return() compute their own exit
code, but tbh I don't want any *other* builtin to hit this either?
Fixes#9659
The test passes but only if executed on its own. It's not the most perfect test,
but I can basically never get `make test` to pass under WSL while that's not the
case on all my other machines.
Keeps the location of original function definition, and also stores
where it was copied. `functions` and `type` show both locations,
instead of none. It also retains the line numbers in the stack trace.
By default, fish does not complete files that have leading dots, unless the
wildcard itself has a leading dot. However this also affected completions;
for example `git add` would not offer `.gitlab-ci.yml` because it has a
leading dot.
Relax this for custom completions. Default file expansion still
suppresses leading dots, but now custom completions can create
leading-dot completions and they will be offered.
Fixes#3707.
This translated ctrl-k to "\v", which is a "vertical tab", and ctrl-l
to "\f" and ctrl-g to "\a".
There is no "vertical tab" or "alarm" or "\f" *key*, so these
shouldn't be translated. Just drop these and call them `\ck` and such.
(vertical tab specifically is utterly useless and I would be okay with
dropping it entirely, I have never seen it used anywhere)
Commit 3b30d92b6 (Commit transient edit when closing pager, 2022-08-31)
inadvertently introduced two regressions to history search:
1. It made Escape keeps the selected history entry,
instead of restoring the commandline before history search.
2. It made history search commands add undo entries.
Fix both of this issues.
Inadvertently broken in a2d816710f,
this made `cd .` no longer offer `cd ../` (same for general file completions
like `ls .`, which only offers dotfiles)
This means cleaning out old universal variables is now just:
```fish
abbr --erase (abbr --list)
```
which makes upgrading much easier.
Note that this erases the currently defined variable and/or any
universal. It doesn't stop at the former because that makes it *easy*
to remove the universals (no running `abbr --erase` twice), and it
doesn't care about globals because, well, they would be gone on
restart anyway.
Fixes#9468.
This now means `abbr --add` has two modes:
```fish
abbr --add name --function foo --regex regex
```
```fish
abbr --add name --regex regex replacement
```
This is because `--function` was seen to be confusing as a boolean flag.
Example output from a Cirrus bionic-asan-clang run:
```
fish: Unknown command: man
/tmp/cirrus-ci-build/share/functions/__fish_man_page.fish (line 30):
if man "$maincmd" &>/dev/null
^~^
in function '__fish_man_page'
�
[I] prompt 9>echo TEXT
[I] prompt 9>echo TEXThrAi
[I] prompt 9>echo TEXThrAi
TEXThrAi
```
Yes, this detected escape, waiting *300ms* and then "h" as being below
the escape timeout of 120ms.
Unfortunately print_hints was true *by default* - so for all builtins
that didn't pass it it would now be false instead.
This resulted in the trailer missing, which includes the line number
and context. So if you ran a script that includes `bind -M` the error
message would now just be "bind: -M: option requires an argument",
with no indication as to where.
This reverts commit 8a50d47a46.
This would print
```
abbr -a -- dotdot --regex ^\\.\\.+\$ --function multicd
```
which expands "dotdot" to "--regex ^\\.\\.+\$...".
Instead, we move the name to right before the replacement, and move
the `--` before that:
```
abbr -a --regex ^\\.\\.+\$ --function -- dotdot multicd
```
It might be possible to improve that, but this at least round-trips.
Historical behavior is to stop option parsing at the first non-option argument.
Since we have added more options, it seemed impractical to keep that behavior.
However people are using options in their abbr expansions ("abbr e emacs
-nw"). To support this, we ignore options. However, we only ignore them
if they are not valid "abbr" options. Let's ignore all options in the
expansion definition, which is a small price to pay to keep most existing
configurations working.
Fixes#9410
This does not fix other cases which used to work, like
abbr x -unknown
Those are hopefully not used by anyone, so I don't think we need to maintain
support for that.
Also default the marker to '%'. So you may write:
abbr -a L --position anywhere --set-cursor "% | less"
or set an explicit marker:
abbr -a L --position anywhere --set-cursor=! "! | less"
This renames abbreviation triggers from `--trigger-on entry` and
`--trigger-on exec` to `--on-space` and `--on-enter`. These names are less
precise, as abbreviations trigger on any character that terminates a word
or any key binding that triggers exec, but they're also more human friendly
and that's a better tradeoff.
set-cursor enables abbreviations to specify the cursor location after
expansion, by passing in a string which is expected to be found in the
expansion. For example you may create an abbreviation like `L!`:
abbr L! --position anywhere --set-cursor ! "! | less"
and the cursor will be positioned where the "!" is after expansion, with
the "| less" appearing to its right.
This adds support for the `--function` option of abbreviations, so that the
expansion of an abbreviation may be generated dynamically via a fish
function.
Prior to this change, abbreviations were stored as fish variables, often
universal. However we intend to add additional features to abbreviations
which would be very awkward to shoe-horn into variables.
Re-implement abbreviations using a builtin, managing them internally.
Existing abbreviations stored in universal variables are still imported,
for compatibility. However new abbreviations will need to be added to a
function. A follow-up commit will add it.
Now that abbr is a built-in, remove the abbr function; but leave the
abbr.fish file so that stale files from past installs do not override
the abbr builtin.
We have had multiple crashes for relative CDPATH entries. Commit 5e274066e
(Always return absolute path in path_get_cdpath, 2019-10-17) tried to fix
all of them but it failed to do justice to its title. Let's fix this to
actually return absolute paths, always. Take care to to normalize the path
because it is used for autosuggestions. The normalization is mostly relevant
for CDPATH=. (the default) but it doesn't hurt others.
Closes#9407
Inside a comment we offer plain file completions (or command completions if
the comment is in command position). However these completions are broken
because they don't consider any of the surrounding characters. For example
with a command line
echo # comment
^ cursor
we suggest file completions and insert them as
echo # comsomefile ment
Providing completions inside comments does not seem useful and it can be
misleading. Let's remove the completions; this should communicate better that
we are in a free-form comment that's not subject to fish syntax.
Closes#9320
This fixes#9321
IEEE Std 1003.1-2017 Issue 6 added optional error condition
[EINVAL] for if no conversion could be performed.
Switch back to wcstoimax/wcstoumax: do not work around the old FreeBSD
8 issue.
Add a test for printf '%d %d' 1 2 3
Like the pexpect-based pager compeltions test `complete-group-order.py`, but for
the `complete` builtin. Verifies the same sort/dedup rules that apply to the
pager are also applied to the output of `complete` and asserts the sort behavior
for multiple `complete -k` calls for the same command and with the same (or with
both passing) preconditions.
This addresses a long-standing TODO where `complete -C` output isn't
deduplicated.
With this patch, the same deduplication and sort procedure that is run on actual
pager completions is also executed for `complete -C` completions (with a `-C`
payload specified).
This makes it possible to use `complete -C` to test what completions will
actually be generated by the completions pager instead of it displaying
something completely divorced from reality, improving the productivity of fish
completions developers.
Note that completions that wouldn't be shown in the pager are also omitted from
the results, e.g. `test/buildroot/` and `test/fish_expand_test/` are omitted
from the check matches in `checks/complete_directories.fish` because even if
they were generated, the pager wouldn't have shown them. This again makes
reasoning about and debugging completions much easier and more sane.
Fixes ommitted newline char shown after complete -n'(foo)'
Also axes the 'contains syntax errors' line before the error.
Update tests
before
> complete -n'(foo)'
complete: Condition '(foo)' contained a syntax error
complete: Command substitutions not allowed⏎
after
> complete -n'(foo)'
complete: -n '(foo)': command substitutions not allowed here
Ensure that multiple `-k` completions intermixed with one or more non-`-k`
completions are produced in the expected order with the order of all completions
in a single `-k` completion respected, non-`-k` completions correctly sorted and
interspersed, and the results of multiple `-k` completions in the
reverse-intuitive order (with chronologically later completions coming before
chronologically earlier `-k` counterparts), as per #9221.
This particular variant must be executed as a pexpect test since it relies on
the interactive-only `$history` to trigger the recursion. Note that recursion is
possible via other means (e.g. reading/writing a file), the usage of history
here is just one such example.
A false negative while testing locally should be a rare thing, and individual
pexpect tests already take too long in case of a non-match making for a painful
edit-test loop.
Up to now, in normal locales \x was essentially the same as \X, except
that it errored if given a value > 0x7f.
That's kind of annoying and useless.
A subtle change is that `\xHH` now represents the character (if any)
encoded by the byte value "HH", so even for values <= 0x7f if that's
not the same as the ASCII value we would diverge.
I do not believe anyone has ever run fish on a system where that
distinction matters. It isn't a thing for UTF-8, it isn't a thing for
ASCII, it isn't a thing for UTF-16, it isn't a thing for any extended
ASCII scheme - ISO8859-X, it isn't a thing for SHIFT-JIS.
I am reasonably certain we are making that same assumption in other
places.
Fixes#1352
We forgot to decode (i.e. turn into nice wchar_t codepoints)
"byte_literal" escape sequences. This meant that e.g.
```fish
string match ö \Xc3\Xb6
math 5 \X2b 5
```
didn't work, but `math 5 \x2b 5` did, and would print the wonderful
error:
```
math: Error: Missing operator
'5 + 5'
^
```
So, instead, we decode eagerly.
Prior to 1811a2d, the return value for negative return codes was UB and I'd
witnessed both expected cases like -256 mapping to a $status of 0 and unexpected
cases like a return value of -1 mapping to a $status of 0. As such, this doesn't
test just one fixed return value but the entire range from negative multiples of
256 all the way down (rather, up!) to -1.
...for improved cross-platform support.
Following up on the work in c90ac7b. There was one more test that had mktemp in
the littlecheck "shebang" and this also removes a now-unnecessary `env` prefix.
All usages of `mktemp` must go through the (fish-only) `mktemp` test function
that abstracts over the differences across multiple platforms/flavors.
Tests can be easily run individually via `ninja -C build test_xxx` and there
isn't a good reason to randomly manually override $HOME and $XDG_CONFIG_HOME for
a test here and a test there.
If it's absolutely necessary, littlecheck.py should be extended to support a
`%temp` variable initialized to a temporary directory and that can be used
instead of calling out to the platform-provided `mktemp` via a subshell.
