* fix Subversion prompt
- after switching to "string match", some SVN status symbols need
proper escaping
- the __fish_svn_prompt_flag_names list was missing
"versioned_obstructed" and was therefore not in line with
the symbols from __fish_svn_prompt_chars
- when checking for individual SVN status symbols, use
"string match -e" to handle the case where multiple different
symbols appear in one status column
- use "sort -u" before merging all symbols from a column into
one line
Fixes#6715
* use regex for SVN status matching
Using regex matching will prevent different match behaviour
depending on qmark-noglob feature.
Also, counting the resulting matches is unnecessary.
* use list instead of string for SVN status
Make $column_status a list be not removing newlines from SVN status
output. This makes checking for the individual status types within
a column easier because it doesn't require regex matching.
* added quotes for string length test (-n)
This adds a "fish_greeting" function that prints the variable of the
same name.
In doing so, it makes $fish_greeting default to a global
variable (this is of little cost because of the `_` builtin)
This means that:
- We have fewer universal variables by default
- If we change the default greeting people will actually get
- it (unless they have a leftover universal, of course)
- If the user changes their language the variable changes with it
`go run` compiles and runs a go program passing along the trailing args to the compiled program. Limiting `go run` to only complete *.go files means that if you are running a go file that takes a file path as a command line argument, you frustratingly cannot use tab completion.
New fish_indent does that too, so this will make any future reformatting
diffs smaller.
Done using either of:
perl -pi -e 'undef $/; s/\n*$/\n/' share/**.fish
kak -n -f '<a-/>\n*<ret>d' share/**.fish
fish's internal completion logic is much smarter than the globbing in this
function, so let's just reuse "complete -C", and filter directories and
files with the given suffix.
Thanks to @Kratacoa for reporting on Gitter.
Using "complete -C" works well no prefix is given. Since in this repository
only the openocd completions pass a prefix, I left the prefix-case as is.
It could probably be improved and simplified as well. The prefix argument was
introduced to avoid cd's side effects inside a completion. Using cd is tempting
though because it would allow to use the same logic as without a prefix.
"repaint" here is a bit of a misnomer. It *doesn't* re-highlight, that
just happens on its own.
It re-runs the prompt, which can take quite a while (depending on the
configuration), and which is also useless in this context as this
isn't something the prompt will be reacting to (theoretically it
could, but I doubt the utility of displaying "PASTE" for a few milliseconds).
The external-commands-only completion was briefly added in 3.1.0 and removed
in 3.1.1 (see #6798), which means we can remove some dead code.
Maybe we should just remove __fish_complete_external_command - it could break
users, but then again, we don't really have a way to stop people from starting
to use this deprecated function. The underscores ought to communicate that
this is function is private to fish but that is not enforced.
pacman -U is intended to be used with (among others) files like this:
# pacman -U ./linux-headers-5.6.2.arch1-2-x86_64.pkg.tar.zst
Thus, let's enable file path completion for this kind of operation.
If it can't recognize the DE, xdg-open uses a "generic" way of opening
things where it doesn't spawn off a DE-provided utility like kde-open.
This sounds great, but it fails to fork and therefore blocks the
terminal.
So we start it in the background and disown it.
Fixes#7215.
a) they can screw up our expected output/behavior
b) they can blow up your system
In my case, the unit tests were calling Pantheon's fish integration
script which would then proceed to blow up dbus with messages about each
individual test completing.
The colors defined in `colorutils.js` are specified in
fish format, and therefore RGB values lack the leading
`#` character and do not fully follow the html/css spec
(w3.org/TR/css-color-4/#typedef-hex-color).
Web config sends these values as-is to the browser,
without first converting to a browser-friendly format.
While this (somehow) works for the most part, a few
colors get lost along the way and do not display in
the customization selector nor in the preview when
selected. This behavior was seen in Firefox.
To fix this, let's prepend the missing '#' character
to all RGB colors defined in `colorutils.js`.
This improves some generated completions, for example:
diff -u completions.old/g3topbm.fish completions.new/g3topbm.fish
+complete -c g3topbm -o stop_error -d 'This option tells g3topbm to fail when it finds a problem in the input'
-complete -c g3topbm -o stop_error
This used to use "success", which was our own thing, but which I can't
get working.
So instead we just use ".then", which only passes one object as an
argument that then contains all the other data we use.
This should be enough to complete the port to angular 1.8
* Update apk-tools completions
Add completions of options of it's subcommands.
The completions of deprecated options is unimplemented.
* Fix installed package listing for apk-tools
An error occurs when the local cache does not exist, so fixed this.
This was always awkward as fish script, and had problems with
interrupting the autoloading.
Note that we still leave the old function intact to facilitate easier
upgrading for now.
Fixes#7145.
Current firefox-developer-edition (i.e. the beta) blocks here.
This is awful and bad, but we can easily work around it by just using
a thread.
Blergh
Fixes#7158
Add a helper function to check if the user is root. This function can be
useful for the prompts for example. Modify the prompts made root checked
to use the function instead. Add also the support of Administrator like
a root user.
Fixes: #7031
I really kinda hate how insistent clang-format is to have line
breaks *IFF THE LINE IS TOO LONG*.
Like... lemme just add a break if it looks better, will you?
But it is the style at this time, so we shall tie an onion to our
belt.
* completions/git: Show all accepted values with git config
Finally closes#3812.
Acceptable values are generated using `git help --config`
* completions/git: Show config value as description for git config
* completions/git: Handle multiline config values
When completing `git config` only display the first
line of config value as description if it is
multiline, appended with an ellipsis.
* Fix#7113 (cannot call help using msys2), correct a few regexes.
* Use regex instead of glob-style matching
* Match `\.exe$` instead of `cmd\.exe$` for WSL
* Match `\.exe(\s+|$)` instead of `\.exe$` and `cmd\.exe$`
* Fix a few regexes
This allows cygstart to be manually set as a browser, with or without arguments
`adb` shell by default sends stderr from the command to stdout, so that `adb pull nonexistent<tab>` will show the error message from the `find` command. `>` must be escaped so that redirection is done inside the command executed by `adb shell`.
- Complete signals with --on-signal
- Complete variables with --on-variable and --inherit-variable
- Complete event handlers with --on-event
- Complete commands with --wraps
- Add `complete` spec for --inherit-variable
This had this weird "pass along the sha, then check" logic to it which
is entirely unnecessary.
This function just says when something is staged, nothing more. Why
that is you can figure out for yourself.
This makes it easier to call this function, and it no longer prints an
empty line if nothing is staged.
This was intended to stop showing the user "unimportant" variables,
but it just didn't complete them entirely, even if the current token
starts with a dunder (or `fish` of all things!).
Because completions sort `_` last, let's just complete these always
and let the user filter them.
This wasn't added to the prompt status order, so it was computed and
then not used for the informative prompt.
We still check later if we should compute it, so this is harmless if
showstashstate is unset.
Fixes#7136.
The `snap interfaces` command prints out a deprecation notice to stderr. This breaks the completion
support for interfaces, connect and disconnect commands like so:
```
$ snap connect <TAB>error: no interfaces found
error: no interfaces found
...
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
error: no interfaces found
error: no interfaces found
'snap interfaces' is deprecated; use 'snap connections'.
```
Ultimately, the snap command completion should switch to `snap connections`. However, for now try to
workaround the notice by redirecting stderr.
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
On my system this printed just "Description:" without any additional
characters, so this awkward `sed` didn't match and produced *all
packages on one line*.
Tbh this should probably be rewritten, but first we'd have to find a
way to get proper output here.
* docs/faq: Mention prepend_sudo
[ci skip]
* __fish_prepend_sudo: Use $history[1] if commandline is empty
Currently, if you press alt+s with an empty commandline, it inserts
"sudo", which seems fairly useless.
Now, it inserts "sudo " followed by the last history entry, which
makes it a replacement for `sudo !!`.
* docs
This reverts commit 1b0ec21773.
"Interactive" has multiple meanings here, one of them being "the whole shell" is interactive, which `status is-interactive` tests, and one "this interaction is interactive", which happens when `read`ing in a script.
Fixes#7080.
* Add an "_" builtin to call into gettext
We already have gettext in C++ (if available), so it seems weird to
fork off a command to start it from script.
This is only for fish's own translations. There's no way to call into
other catalogs, it just translates all arguments separately.
This is faster by a factor of ~1000, which allows us to call
translations much more, especially from scripts.
E.g. making fish_greeting global by default would hurt cost-wise,
given that my fish starts up in 8ms and just calling the current `_`
function takes 2ms, and that would have two calls.
Incidentally, this also makes us rely on a weirdly defined function
less, so it:
Fixes#6804.
* docs: Add `_` docs
Let's see if that filename works out.
* Reword _ docs
This is a function you can either execute once, interactively, or
stick in config.fish, and it will do the right thing.
Some options are included to choose some slightly different behavior,
like setting $PATH directly instead of $fish_user_paths, or moving
already existing components to the front/back instead of ignoring
them, or appending new components instead of prepending them.
The defaults were chosen because they are the most safe, and
especially because they allow it to be idempotent - running it again
and again and again won't change anything, it won't even run the
actual `set` because it skips that if all components are already in.
Fixes#6960.
fish_git_prompt encloses its output in brackets, however this can be changed by supplying a format string to it, i.e. `fish_git_prompt %s`.
However when using `fish_vcs_prompt` there's no way to pass on the arg to fish_git_prompt, so you need to manually remove it.
fish_hg_prompt doesn't have the same format string support as fish_git_prompt, but I suppose it could be added later if needed.
We don't need to call it if a job was stopped, because in that case
read_i() will fire fish_prompt already, because the newly stopped job
was probably a foreground job.
Fixes#1018
The default implementation will not print any output in that case, but this provides users with additional flexibility when it comes to customising the shell's behaviour.
This allows users to customise the behaviour of the shell by redefining the function. This is similar to how fish_title or fish_greeting behave, where the default implementation can be easily overridden.
The function receives as arguments the job id, command line, signal name and signal description.
Since 4414d5c888 (in fish 3.0.0) we
don't autoload completions if the command doesn't exist.
So there is no need to check inside the scripts anymore.
Whats more, a few (like pip and cabal) checked `command -q` instead of
`type -q`, meaning they'd fail if someone used a function instead of a
command of that name.
If the *command* actually needs to exist, checks like that are still
warranted, like in `npm` where aliasing it to `nvm` is popular.
A teensy additional bit: Make `sysctl -w` the same as `sysctl
--write`. That description was bogus.
At the moment calling __fish_prepend_sudo multiple times does not toggle
sudo, and also unnecessarily uses the `-c` flag to `commandline` to see if
the first token on the commandline is "sudo".
This change removes the `-c` switch and also toggles "sudo" on multiple
calls to __fish_prepend_sudo, while maintaining the cursor position and
while maintaining any spaces between "sudo" and the next token on the
commandline.
The local-exported variable will have disappeared by the time the
function is called.
"-V"/"--inherit-variable" is meant for something like this.
Fixes#7011
