We detect one terminal (foot) with a "string match" command, and all others in a long "test"
command. Let's put the detection of each terminal on a new line. This should be easier to read
and change. It also allows to lose one level of indentation.
This takes the changes from 03b23dd1b6
and applies them to the .theme version as well.
(note: It's *possible* to just go through fish_config in future, but
we do not want to do that right now because that can have issues on
upgrade)
This was an undocumented undunderscored function that wouldn't be
super useful to actually use manually (because it still checked if the
variable was set!). It also relied on `__init_uvar`, which was only
set in `__fish_config_interactive`.
Additionally it didn't remove any complexity because this was all very
simple "do thing a, do thing b, do thing c" stuff. It added a layer of
indirection instead, and made fish startup dependent on another
function.
If you want to reset your colorscheme to the default, use fish_config.
Add completions that are correct on darwin and probably bsd.
Add missing -H, -L, -P completions to GNU chown.
Remove errant GNU completion claiming -h is short for --help.
The regex for task names was a bit off, so
- include uppercase letters, to support `TMessagesProj:assembleMiniRelease`
- don't include characters like `[]` (which happen to lie between ASCII `A` and `z`)
- include numbers, which are presumably valid in an identifier
- explicitly include the optional ` - ` bit in the regex
- Use named colors instead of hex values - not sure how this
happened in the first place, these all map to basic named colors.
- Reinitialize if these were last set on fish <3.4, new variables
have been added.
- Break this into a separate function for the sake of
__fish_config_interactive complexity, and allow for running
manually.
Remove some nonexistent options (my gcc does not know "-mdata"), fix
the longest description in all of fish and remove some argument
markers from the option.
This sets the variable to the background value of
$fish_color_search_match, which fixes the case where you switch from a
theme with a set selected background (like our default, now) to one without.
It's using GNU specific flags, which doesn't work on BSDs like macOS.
Instead this just formats the current time into
seconds and then the `math` builtin for calculating the 5 min timeout.
Unfortunately the normal font families like "sans-serif" and
"monospace" are basically broken because the browser defaults are
decades old.
TODO: Inline code is barely distinguishable.
GNU tr is not Unicode-aware, and was corrupting descriptions that had
non-ASCII characters.
Additionally, rather than using the Unicode private use characters, use
the ASCII/UTF-8 record separator character as it was intended.
The sed command could probably be rewritten to do all the heavy lifting
here, but would be even less readable.
Closes#8575.
Instead of weirdly smearing the color, simply increase the values
until they are bright enough.
This prevents /tmp from being white, and guarantees visible colors for
all directories.
fish_git_prompt may run certain git commands which may invoke certain
external programs as specified `.git/config`. Prevent this by suppressing
certain git config options.
The `name` attribute I used in commit f725cd402d
is undocumented, and [someone discovered] that it does not exist for one
possible browser on MacOS. This should make the code work correctly even in that case.
This probably doesn't currently cause a problem, at least when
`isMacOS10_12_5_OrLater()` is true, because of the ordering of the if
statements in the `runThing` function.
[someone discovered]: https://bugs.python.org/issue43424#msg409087
Git completions use wrapper function __fish_git instead of directly
running git. This allows them to be aware of Git's global options, like
--git-dir. Let's use __fish_git also for listing config keys & values,
so it can more accurately list local (= per repo) git configuration.
We don't provide completions on "git config " because we require
"fish_is_nth_token 3". Confusingly, fish_is_nth_token only counts
tokens *before* the cursor, so 2 is the right number here.
While at it, fix a typo and delete an unused completion entry (it
ran conditional on __fish_is_first_arg, which is always false for a
git subcommand).
This patch introduces basic completion of the -pl|--projects switch for
mvn. The implementation is quite naive but it's better than nothing. A more
robust implementation would require either scanning the filesystem or running
mvn which might slow down completion significantly.
This solution can be improved by using an XML parser instead of grep/sed.
This is a stop gap. Ideally setting a theme would be idempotent. You
set it, all colors change to match it, even the ones it does not
specify.
However, I do not believe we can *erase* colors that aren't set, and
we don't currently do so in the CLI version. So skip setting these at
all, for now.
If a color is mentioned but empty, it will be set to empty.
If the theme says "brgreen", that's what we want the variable to say
after.
This used to translate it through our palette, so it ended up as
00ff00, which isn't the same.
This still keeps the idea that colors that aren't in the palette are
better, and it does it in a slightly roundabout way (translate color
string to rgb string, see if the rgb string is a key in that
translation dictionary), but it should work for now.
* add --bold, --italics, all of them,
* and we add them as arguments so that they are do not
render like long options, they are just self-descriptive
literal strings in this context.
* solve an unneccessary global var.
Fixes#8518
Theoretically if this only includes simple characters, it won't cause
any issues. We already validate in other places but it doesn't hurt to
do this twice.
Now that we have modifiers and can have backgrounds and such, simply
setting it as css style doesn't cut it.
So let's stop validating for now, the worst that can happen is that
the color isn't rendered.
This just simply passed the "color" value, which is just the
foreground color string.
Instead, we pass the actual object back, with the modifiers as bools
and foreground/background separate.
Our themes don't use background a lot, except in the pager, so this
never really came up.
Use the remaining_to_disclose count to determine if all completions
are shown (allows consistent behavior between short and long completion
lists).
Closes#8485
Cargo subcommand extensions don't provide a description in `cargo --list`,
the regex used to filter this list ignored lines without a description.
This change fixes that.
A completion entry like «complete -a '\\~'» results in completions
that insert \~ into the command line. However we usually want to
insert ~, but there is no way to do that.
There are a couple of longstanding issues about completion escaping
[1]. Until we fix those in a general way, fix the common case by
never escaping tildes when applying custom completions to the command
line. This is a hack but will probably work out fine because we don't
expect literal tildes in arguments.
The tilde is included in completions for cdh, or
__fish_complete_suffix, which simply forwards results from "complete
-C". Revert a workaround to cdh that expanded ~, because we can now
render that without escaping.
Closes#4570, #8441
[ja: tweak patch and commit message]
[1]: https://github.com/fish-shell/fish-shell/pull/8441#discussion_r748803338
* Rename pabcnetcclear complete
* Code clean-up
* Debug values support
* Change /Debug description
* Standardize help
* Use single quotes for --arguments
We only need the curses module to look up sgr0, bold and underline
sequences.
Since those are going to be the xterm versions 90% of the time, we can
simply use those if this fails.
Fixes#8487.
* Add findstr completion
* Standardize completion
* Show completion only on Windows
* Use single quotes where possible
* Remove quotes where possible
* Remove OS check
* Use single quotes for --arguments
This looked at __fish_print_commands, which goes via our man pages to
find the commands (it shouldn't, buuut), and exludes a hard-coded list
of pages.
So we do two thigns:
1. We add the other doc pages to the list
2. We check commands *later* - if we listed something explicitly it
should be used
This was "--authoritative" (and unauthoritative). It was meant to make
fish mark everything that couldn't be generated via the completions as
an error, it was removed years ago and has been a no-op since then.
This behavior matches the way completions are found for `cargo run`,
`cargo test`, etc., and is more robust and correct compared to looking
at filenames.
This was supposed to act like `type -q` or `command -q`, in that it
returns 0 if at least 1 exists.
But because it used the wrong variable it didn't.
Fixes#8431.
Foot has several terminfos:
* foot - the default one
* foot-direct - 24-bit color terminfo, similar to xterm-direct (used by e.g. emacs)
* foot-extra - alternative to the ncurses provided terminfo, with a couple of extra, non-standard
capabilities
* foot-extra-direct - 24-bit color version of the above
There may also be other distro-custom terminfo names (serving the same purpose as foot-extra*)
Otherwise, with a light-theme, the selected entry uses black text with
"bright black" background, which can be low contrast thus hard to read.
The description background is different, maybe we can fix that later.
See #8376
This is nroff/groff being broken. It turns "→" into "â". This is even if we select `-Tutf8` and friends.
So, if mandoc exists, we prefer that, and otherwise, run preconv on
the file first (if it exists).
Really, what we would need to to is tell nroff to pass `-KUTF-8` to
groff, but that doesn't appear to be possible.
- Introduce BUILTIN_ERR_COMBO2_EXCLUSIVE
- Distill generally more terse, unambiguous error descriptions.
Remember English is not everyone's language.
- Do not capitalize sentence fragments
- Use the modality where problem input is in a %s: prefix, then
is explained.
- Do not address the user (the "You cannot do ..." kraderism)
- Spell out 'arguments' rather than 'args' for consistency
- Mention 'function' as a scope
This basically disables syntax highlighting. That doesn't mean we use
absolutely no colors - the search match, suggestion, selection and the
pager have coloring, but only reverse or brblack.
The idea is that this disables anything that tells you about
the *syntax*, but it still tells you about the state of the
commandline. If we didn't highlight the selection it would be entirely
invisible, and if we didn't highlight the suggestion you would have no
idea where it begins.
So this basically brings colors on-par with bash, where the search
match is colored (in reverse) and suggestions aren't a thing.
An alternative is to add a $fish_highlighting_enabled variable like
the one for suggestions. That's still possible, but would require some
internal changes to avoid coloring some things with $fish_color_normal
and other things with the normal terminal color.
One thing this also does not do is set the git prompt colors. These
are currently disallowed from being set in theme files because they
start with `__fish` instead of just `fish`. We should probably rename
them.
This program uses the Cobra framework for argument parsing and completion generation.
Just source the completions supplied by upstream.
This works around "go install" not being able to install completions files (only binaries).
