The issue here was that the `python` completion did a version check on
the `python` binary, so it would complete python2 stuff if system
python was py2, even if the user tried to complete `python3`.
This isn't beautiful, but it's more resilient than e.g. doing magic
with `commandline`.
Fixes#3840.
* Add completions for minikube
This adds basic completions for minikube, the subcommands and their options.
* Improve minikube completions
- Use more consistent and shorter descriptions.
- Fix subcommand options
- Add more semantic completions
* Fix named variable for option value
* Add completions for minikube addons enable/disable
* Add completions for minikube addons open
This commit addresses many of the style problems with the previous
commit. If this introduces any bugs they are solely my fault. The style
of this code needs more improvement. Some of which could be done today.
Others will have to wait until `fish_indent` is improved.
Add IPV6 /etc/hosts completion support. Parses columns rather than values which produces improved output.
Support ssh -F and Include completion
Ignore ssh Hostname and Host with wildcard. The following only get in the way:
- Hostname: Host resolves to Hostname
- Wildcard Host: Cannot ssh to a glob pattern
Improve scp completions
* complete only local files when no host provided
* complete only remote files when host is provided
* complete local files or hosts when no separator
Disable username completion for ssh/scp
Username completion only provides local users which will unlikely be
useful on a remote machine. ssh will use the current username (the only
useful one) or one provided in the ssh config.
* Improve bzr completion. Closes#3661
* Add basic completion for bzr commands
* Include short and log options for common commands
* Removed not so common commands
* Remove trailing '.' as requested by #3769
* Remove '=' as suggested by #3769
* We don't need '=' in long options
* Use fish helper functions for autocomplete
To avoid issues pointed out in #3769 helper functions included in fish
are used (__fish_use_subcommand and __fish_seen_subcommand).
* Fixed typo
- Support completing dynamic make targets.
- Support completing make targets when using -C/--directory.
- Support `-Cdir/path`, `-C dir/path`
- Support `--directory=dir/path`, `--directory dir/path`
This detects if the make command have the `-p` switch otherwise it
assumes it is BSD make and will run a different command to try to figure
out the available targets.
Commits 48aa92900 and 77d4d21ca each added two files with the same name
differing only in letter case. That causes problems on systems like
macOS and MS Windows. Remove the lowercase file names. Anyone needing
those completions can do (same for VBoxHeadless):
function vboxsdl --wraps VBoxSDL
VBoxSDL $argv
end
The previous implementation didn't take into account that a lexer could
have multiple names and gave `cpp, c++` instead of `cpp` and `c++` when
completing `pygmentize -l c`.
--authoritative and --unauthoritative 'complete' builtin switches have no effect anymore.
This commit removes usage of --unautoritative/-u in completions.
--authoritative and --unauthoritative 'complete' builtin switches have no effect anymore.
This commit removes usage of --autoritative/-A in completions.
This might be a bit over the top, but getting the information that a default priority threshold is used without knowing what that value is or how to find out might not be so useful after all. Thus, change the completion to include this information dynamically.
The last commit to this auto completion changed it to use `string replace` instead of `tr`. Unfortunately they do not behave the same. `tr " = " "\t"` replaces " = " with a tabulator character, while `string replace -a " = " "\t"` replaces it with \t. Either `string` is misbehaving or this auto completion was broken.
* add completions for mkvextract
* fix edge cases with option placement in mkvextract.fish
* improve resiliency to errors in mkvextract.fish
* minor fixes in mkvextract.fish
The `status` command currently silently allows incompatible flags (i.e.,
subcommands). Too, using flags to specify subcommands misleads the user
into thinking they can specify multiple subcommands.
We recently modified the `history` command to deprecate using flags for
subcommands. This change does the same for the `status` command.
Fixes#3509
SysBench is a modular, cross-platform and multi-threaded benchmark tool for
evaluating OS parameters that are important for a system running a database
under intensive load
The dpkg-reconfigure command is used on Debian and Ubuntu based systems to reconfigure packages.
According to the relevant manpage's the commited completion file should be complete.
Use $USER, prompt_hostname, string
Update to use correct color names such as magenta over purple.
Use bright color variants instead of bold in some cases.
This adds a flag to the `history search` command to limit the number of
matching entries to the first "n". The default is unlimited. This is
mostly useful in conjunction with aliases (i.e., functions) that are
intended to report the "n" most recent matching history entries without
piping the result through the user's pager.
Fixes#3244
This deprecates the use of long options for history sub-commands (e.g.,
`history --delete`) in favor of proper sub-commands (e.g., `history
delete`). It also eliminates the short options for those sub-commands.
Also change option processing to allow options anywhere on the command
line to match how the vast majority of fish builtins handle flags.
Replace --with-time with --show-time.
Fixes#3367
chown completion chown currently uses cat /etc/group to fetch the list of group names. In Cygwin there's no /etc/group file any more (user and group names are fetched directly from the OS), so when a user tries to tab-complete the group name they get an error message:
ASchulma@LZ77E1AASCHULMA ~/d/fish> chown ASchulma🐱 /etc/group: No such file or directory
This change fixes that by using getent group (via __fish_complete_groups) by preference to get the group names, and falling back to /etc/group. This is more portable.
This can be prohibitively slow on large repositories (minutes!).
While regrettable, no user is going to like waiting that long.
Work towards #3342, rerun of #3230.
Many thanks to @gladhorn for the idea!
Offering auto completion for existing commits is great, but on big
repositories, it suddenly becomes really slow, even with fast hard
disks, since each commit is read and then a line processed for it.
Instead limit to the last 500 commits (arbitrary number) which still
feels fast. Going back further in history can easily and more reasonably
done with git log etc.
* completions/p4.fish
* Updated per comments + added p4 clients
* p4 completions: integ, opened, reopen. "default" CL support.
* Perforce RCS -> SCM
* p4 reopen: list opened files
* Fixed per review, added -d for all functions
Fixed per comments in review by @faho,
Added -d for all functions,
Renamed ”subcommand" term to “command” (so there’s probably diff noise)
* p4 completions with submit list of files
* p4 completions for submit: lists open files
* fixes broken completion of screen on osx, test on ubuntu and mac with fish 2.3.1
* replaces sed, __fish_sgrep with fish builtin string
* add completion for `screen -x`
* adjust format (e.g. 12345.socket\t01/01/16 09:55:00 Detached)
* Fix brew completion for `brew install`
* Using `brew search` rather than `brew --repository`
- Homebrew migrated the directory holding their Formulas into Taps, breaking fish's completions.
- New method to find all Homebrew-core Formulas
- Compatible with old versions of Homebrew and more future proof
* Replace fixed path to search formula with `brew --repository`
* Replace `sed` with builtin `string replace`
* git completion: add mergetool
The list of tools is stole from the bash completion file that comes with
git.
* git completion: complete files with merget conflict for mergetool
I mixed things up with `netctl` somehow. Since the two are quite
different they do not have the same function, they should not have
the same completions.
I also find that I would be smarter to only display the relevent
profiles given what we want to do. If we want to disable a profile
we should only complete with enabled profile for completion for
instance. I don't know if the implemention is nice enough however.
Completion throws and error about the command `__fish_contains_opts` beings unknown. It seems to be a simple typo, as all other completions use `__fish_contains_opt`
Move to `string match` syntax from `grep` caused test to see if the Atom Package Manager is installed to always fail. This appears to fix the issue (tested on fish 2.3.0 with apm 1.6.0).
This is quite ugly because the syntax is ugly, the documentation both
under- and overspecified at the same time (a BNF that isn't...) and it
has a lot of functionality.
But the completion works half-decent for `ip address`, so let's ship it.
A few commands (fetch, pull and push at least) take a "repository" (aka
"remote") and then a "refspec" (we currently do branches here).
Fixes#2525 (seems that man is still alive)
I believe apm must have been buggy - example output that I found online
showed `tr` was mangling paths with spaces in it. Should be fixed.
Also, use dscl on OS X in __fish_complete_users.fish like
__fish_print_users.fish already does.
Only match loaded modules when -r is specified.
Also adds /lib/modules/(uname -r)/misc to the search path.
This directory is used by Gentoo for package-provided modules
(such as the app-emulation/virtualbox-modules)
