Prior to this change, we would run fish_prompt and then afterwards set
the shell modes. For users with an initially slow prompt, this would
mean that characters would be echoed to the tty until after the prompt
completes.
Reorder these so that we set the tty mode first. This implies we will
run the prompt in shell mode, but this was already the case up until
2a3677b386.
Fixes#7489. Note that the prior commit e0cedd4ad2 is also necessary
here, as that fixed an extra prompt execution.
Prior to this fix, when key binding is a script command (i.e. not a
readline command), fish would run that key binding using fish's shell
tty modes. Switch to using the external tty modes. This re-fixes
issue #2214.
Prior to this change, for bindings which have script commands, the
inputter would execute them directly. However an upcoming fix for #7483
will require more integration with the reader. Switch to a new model where
the reader passes in a function to use for executing script commands.
It may happen that the user types an abbreviation and then hits return.
Prior to this commit, we would perform a form of syntax highlighting
that does not require I/O, so as to not block the user. However this
could cause invalid commands to be colored as valid.
More generally if the user has e.g a slow NFS mount, then syntax
highlighting may lag behind the user's typing, and be incorrect at the
time the user hits return. This is an unavoidable race, since proper
syntax highlighting may take arbitrarily long.
Introduce a new function `finish_highlighting_before_exec`, which waits
for any outstanding syntax highlighting to complete, BUT has a timeout
(250 milliseconds). After this, it falls back to the no-I/O variant, which
colors all commands as valid and nothing as paths.
Fixes#7418Fixes#5912
In some cases the completion we come up with may be unexpected, e.g.
if you have files like
/etc/realfile
and
/etc/wrongfile
and enter "/etc/gile", it will accept "wrongfile" because "g" and
"ile" are in there - it's a substring insertion match.
The underlying cause was a typo, so it should be easy to go back.
So we do a bit of magic and let "cancel" undo, but only right after a
completion was accepted via complete or complete-and-search.
That means that just reflexively pressing escape would, by default, get you back to
the old token and let you fix your mistake.
We don't do this when the completion was accepted via the pager,
because 1. there's more of a chance to see the problem there and 2.
it's harder to redo in that case.
Fixes#7433.
It is apparently possible to launch fish such that its pid owns the tty,
but its pid is in a different pgroup. In that case, do not attempt to stop
with SIGTTIN; instead simply attempt to place fish in its own pgroup.
Fixes#7388
This allows
bind -k backspace suppress-autosuggestion or backward-delete-char
To remove the suggestion on the first press and then delete
chars.
Note: This requires that we then don't reenable suggestions
immediately afterwards. Currently we don't after deletion.
Fixes#1419.
This makes history searches case-insensitive, unless the search string
contains an uppercase character.
This is what vim calls "smartcase".
Fixes#7273.
When pressing tab repeatedly, completions only computed on the first one. This
is because the old logic assumed that completions are present if the last
key was tab. Recompute them if there are no completions at all.
Fixes#6863
(regression from d415350aaf)
This is important especially in e.g. the new Windows Terminal, because
for some reason that lets the tab stick around if the process exited
with a non-zero status.
Will add tests as soon as I figure out how.
This can easily lead to an infinite loop, if a variable handler
triggers a repaint and the variable is set in the prompt, e.g. some of
the git variables.
A simple way to reproduce:
function fish_mode_prompt
commandline -f repaint
end
Repainting executes the mode prompt, which triggers a repaint, which
triggers the mode prompt, ....
So we just set a flag and check it.
Fixes#7324.
Found with gcc's -Wmissing-declarations which gives warnings like
../src/tinyexpr.cpp:61:5: warning: no previous declaration for ‘int get_arity(int)’ [-Wmissing-declarations]
61 | int get_arity(const int type) {
The same warnings show up for builtin functions like builtin_bg because they
currently don't include their own headers. I left that.
Also reformat the touched files.
So we can do something on every edit, for example repaint the pager (#7318).
This patch fixes pager refiltering and repainting when pressing Control+U
after typing something in the search field.
Implement this by moving the convenience functions from editable_line_t to
the reader, so we have fewer places where we need to refilter. Essentially we
only have two cases: insertions at the cursor are handled by insert_string(),
and all others go through push_edit(). This should also make it clearer
where we update undo_history.may_coalesce.
This commit was on the history-search-edit-needle branch, so it should
work fine. I hope it does play well with some recent changes.
In 6d339df61 (Factor repainting decions from readline commands better
in the reader), insert_string() was simplified a lot, mirror that.
The tests for editable_line_t are not that useful anymore since the caller has
to decide whether to coalesce insertions, but I guess they don't hurt either.
We should have more tests for some interactive scenarios like undo and the
pager filtering.
This was broken in 6d339df612, when we removed
the normal repainting logic.
The pager *search* however needs to trigger a refilter, and therefore
needs to trigger after every insert/removal.
Fixes#7318
This would only check for fish_right_prompt at startup, so if one
wasn't defined then it would never accept one.
The "config" here is just the *name* of the function (which we never
change, so it wouldn't really be necessary, but whatever).
The one exception is the breakpoint, in those we don't run the right
prompt.
Fixes#7302.
This adds a new type 'exit_state_t' which encapsulates where fish is in
the process of exiting. This makes it explicit when fish wants to cancel
"ordinary" fish script but still run exit handlers.
There should be no user-visible behavior change here; this is just
refactoring in preparation for the next commit.
The line offset of a trailing newline on the commandline was computed incorrectly.
As a result, up-arrow did not work for a commandline like the one inserted by:
commandline -i echo '' ''
Note this and the previous commit in the changelog.
Enter a multiline commandline, for example using
commandline -i echo echo
And press down-arrow. This will start a new history search which fails.
Then press up-arrow. I expect the cursor to move up, however, because we
are still in history search mode, up-or-search will search instead of moving
the cursor. Correct that by stopping history searches that don't have any results.
Prior to this change, if we saw more than one repaint readline command in
a row, we would try to ignore the second one. However this was never the
right thing to do since sometimes we really do need to repaint twice in a
row (e.g. the user hits Ctrl+L twice). Previously we were saved by the
buginess of this mechanism but with the repainting refactoring we see
missing redraws.
Remove the coalescing logic and add a test. Fixes#7280.
If you expand an abbreviation by executing the command, fish uses a
synchronous mode of syntax highlighting that performs no I/O, because we
want to highlight the abbreviation but don't know if it's valid or not
without doing I/O. However we were doing this too aggressively, after
every command regardless of whether it contained an abbreviation. Only
do this for commands with abbreviations.
When typing into the command line, some actions should trigger repainting,
others should kick off syntax highlighting or autosuggestions, etc. Prior
to this change, these were all triggered in an ad-hoc manner. Each
possible
This change centralizes the logic around repainting. After each readline
command or text change, we compute the difference between what we would
draw and what was last drawn, and use that to decide whether to repaint
the screen.
This is a fairly involved change. Bugs here would show up as failing to
redraw, not reacting to a keypress, etc. However it better factors the
readline command handling from the drawing.
Prior to this fix, the `exit` command would set a global variable in the
reader, which parse_execution would check. However in concurrent mode you
may have multiple scripts being sourced at once, and 'exit' should only
apply to the current script.
Switch to using a variable in the parser's libdata instead.
This used to be used to determine which token contained the cursor, so
as to highlight potential paths. But now we highlight all potential paths,
so we can remove the field.
In practice we didn't use the cache for anything. Always compute it on
demand.
This eliminates the 'indents' variable which had to be manually kept in
sync with the command line.
This can be used to determine whether the previous command produced a real status, or just carried over the status from the command before it. Backgrounded commands and variable assignments will not increment status_generation, all other commands will.
Have the reader accept a constant configuration object, which controls
whether autosuggestions, etc. are enabled. These things don't change
dynamically.
Prior to this fix, if you invoked fish with --private and then used
`read --silent` to read something sensitive, the variable would be
stored in history, with the plain text available through up-arrow.
Fix it to not store items in silent mode.
Note the item was never written to disk; it was only stored in memory.
Fixes#7230
The prefix has already been case-corrected at this point and the remaining
completions are for the suffix only.
Fixes#7211
Introduced in
28d67c8f Show completion list on Tab also if a common prefix was inserted
When fish receives a "cancellation inducing" signal (SIGINT in particular)
it has to unwind execution - for example while loops or whatever else that
is executing. There are two ways this may come about:
1. The fish process received the signal
2. A child process received the signal
An example of the second case is:
some_command | some_function
Here `some_command` is the tty owner and so will receive control-C, but
then fish has to cancel function execution.
Prior to this change, these were handled uniformly: both would just set a
cancellation signal inside the parser. However in the future we will have
multiple parsers and it may not be obvious which one to set the flag in.
So instead distinguish these cases: if a process receives SIGINT we mark
the signal in its job group, and if fish receives it we set a global
variable.
We were previously aborting the main event loop before calling fish_exit
in the event of a SIGHUP. This patch causes the SIGHUP to be stored in a
separate state variable from a regular "must exit" condition so the
associated event can be fired before we terminate the loop.
All streams are redirected before the event is called to prevent a
SIGTTIN/SIGTTOU due to the user script reading/writing from a disposed
tty.
Closes#7014
When selectiong a large completion entry in the pager, it would clobber the
prompt. To reproduce, first run this command
complete -c : -xa '(
# completion entries that, when applied to the commandline
# need one, two, or three lines respectively
echo 1
echo 2(string repeat -n (math $COLUMNS - 5) x)
echo 3(string repeat -n $COLUMNS x)
printf %s\n n(seq $LINES)
)'
then type ": " and hit Tab repeatedly. When cycling through completion
entries, observe that fish always tries to render the pager with the same
size, even though the number of lines occupied by the command line buffer
changes due to soft wrapping.
Fix this by rendering the pager after the command line has been rendered, so
we know how many lines we have left.
Prior to this commit, fish used NUL ('\0') to disable control
functions (for example, the function that generates SIGTSTP).
However NUL may in fact be bindable and is on macOS via
control-space.
Use instead _POSIX_VDISABLE if defined and not -1.
This was always awkward as fish script, and had problems with
interrupting the autoloading.
Note that we still leave the old function intact to facilitate easier
upgrading for now.
Fixes#7145.
Page-Down seems to deactivate history search, so trying to undo
would leave the command line in an inconsistent state.
Fixes#7162 which was introduced in
12a9cb29 Fix assertion failure on page up / page down
It is used exclusively as vector at the moment since we only ever append
at the end. Making it a deque would be useful when allowing to edit the
search string and subsequently resume the search at an arbitrary position
in the history.
When editing a multiline command line and pressing "up" with the cursor at the
first line, fish attempts a hsitory search. If the search fails, don't move
the cursor to the end of the multiline command because this can be annoying
when the user does not actually want to perform a history search.
I really kinda hate how insistent clang-format is to have line
breaks *IFF THE LINE IS TOO LONG*.
Like... lemme just add a break if it looks better, will you?
But it is the style at this time, so we shall tie an onion to our
belt.
This makes binding \cz possible.
We already ignore the SIGTSTP signal it sends, so until now it was useless.
(also STOP and START for good measure, but since we disable flow
control in fish anyway these already shouldn't have been sent)
Fixes#7152
These control the disambiguation between ctrl-j and ctrl-m.
This can cause the enter key to send a ctrl-m, which programs might be
unprepared for.
(This is why you need to do `stty sane<ctrl-j>`)
In #7133, neovim crashing caused "OPOST" to be turned off, which
caused a weird staircase display.
So we just force a set of settings that don't seem useful to change to
avoid breaking the terminal with something like that.
Fixes#7133.
Finish the transition to termsize.h. Remove the scary termsize bits
from common.cpp, which can throw off events at arbitrary calls and are
dangerously reentrant. Migrate everyone to the new termsize.h.
Prior to this fix, s_reset would attempt to reset the screen, optionally
using the PROMPT_SP hack to go to the next line. This in turn required
passing in the screen width even if it wasn't needed (because we were
not going to abandon the line). Factor this into two functions:
- s_reset_line which does not apply the hack
- s_reset_abandoning_line which applies the PROMPT_SP hack
common_get_width will "lazily" decide the screen width, which means
changing the environment variable stack. This is a surprising thing
to do from the middle of screen rendering.
Switch to passing in widths explicitly to screen.
This allows tools like `stty` to set the terminal modes and fish will
honor them, for external commands.
The modes for fish are kept as they are.
Until now, the only change fish would do to the external modes is to
disable flow control *every time*, this changes it to only disabling
it on startup.
After that we don't apply *any* changes to the external modes (no
checks or validation or...), because we've never done that (other than
flow control), and it's not been a problem.
Fixes#2315.
If a readline command is bound to a key sequence which also sends a
signal, then fish will set the cancel flag in addition to handling the
command. But this cancel flag is then persistent. Ensure it gets cleared
after each command.
Fixes#6937
* Fire fish_postexec event after tokenization error
This is a fix for issue #6816 "shell integration with tokenization error"
* Pass command-line to fish_postexec on tokenization error
* Rename and move event for tokenization error
For the last 15 years the space was only skipped when the completion
ended in one of "/=@:". Add ".," since they are also sometimes used to
separate independent words within a token.
Fixes#6928
Improves on #6833
This updates the behavior of tilde to match the behavior found in vim.
In vim, tilde toggles the case of the character under the cursor and
advances one character. In visual mode, the case of each selected
character is toggled, the cursor position moves to the beginning of
the selection, and the mode is changed to normal. In fish, tilde
capitalizes the current letter and advances one word. There is no
current tilde command for visual mode in fish.
This patch adds the readline commands `togglecase-letter` and
`togglecase-selection` to match the behavior of vim more closely. The
only difference is that in visual mode, the cursor is not modified.
Modifying the cursor in visual mode would require either moving it in
`togglecase-selection`, which seems outside its scope or adding
something like a `move-to-selection-start` readline command.
Currently we do not add such command lines to the history, so there
won't be a suggestion from history anyway.
Fixes#6763 which occurs because midnight commander feeds fish commands
like this one (note the loading space)
` cd (printf '%b' '\0057home\0057johannes\0057git\0057fish\0055shell\0057build')`
This teaches the reader fast-path to use self-insert-notfirst, allowing
it to handle spaces. This greatly increases the performance of paste by
reducing redraws.
Fixes#6603. Somewhat improves #6704
This adds basic support for self-insert-notfirst. When we see a
self-insert-nonempty char event, we kick it back to the outer loop,
which only inserts the character if the cursor is not at the beginning.
This adds a new readline command self-insert-notfirst, which is
analogous to self-insert, except that it does nothing if the cursor
is at the beginning. This will serve as a higher-performance implementation
for stripping leading spaces on paste.
Which happened when starting the selection at the end of the commandline.
In this case, selections still interact weirdly with autosuggestions (the
first character of the suggestion appears to be part of the selection
when it's not).
Fixes#6680
Add the input function undo which is bound to `\c_` (control + / on
some terminals). Redoing the most recent chain of undos is supported,
redo is bound to `\e/` for now.
Closes#1367.
This approach should not have the issues discussed in #5897.
Every single modification to the commandline can be undone individually,
except for adjacent single-character inserts, which are coalesced,
so they can be reverted with a single undo. Coalescing is not done for
space characters, so each word can be undone separately.
When moving between history search entries, only the current history
search entry is reachable via the undo history. This allows to go back
to the original search string with a single undo, or by pressing the
escape key.
Similarly, when moving between pager entries, only the most recent
selection in the pager can be undone.
Prior to this fix, fish was rather inconsistent in when $status gets set
in response to an error. For example, a failed expansion like "$foo["
would not modify $status.
This makes the following inter-related changes:
1. String expansion now directly returns the value to set for $status on
error. The value is always used.
2. parser_t::eval() now directly returns the proc_status_t, which cleans
up a lot of call sites.
3. We expose a new function exec_subshell_for_expand() which ignores
$status but returns errors specifically related to subshell expansion.
4. We reify the notion of "expansion breaking" errors. These include
command-not-found, expand syntax errors, and others.
The upshot is we are more consistent about always setting $status on
errors.
This commit recognizes an existing pattern: many operations need some
combination of a set of variables, a way to detect cancellation, and
sometimes a parser. For example, tab completion needs a parser to execute
custom completions, the variable set, should cancel on SIGINT. Background
autosuggestions don't need a parser, but they do need the variables and
should cancel if the user types something new. Etc.
This introduces a new triple operation_context_t that wraps these concepts
up. This simplifies many method signatures and argument passing.
Previously, the block stack was a true stack. However in most cases, you
want to traverse the stack from the topmost frame down. This is awkward
to do with range-based for loops.
Switch it to pushing new blocks to the front of the block list.
This simplifies some traversals.
This adds support for `fish_trace`, a new variable intended to serve the
same purpose as `set -x` as in bash. Setting this variable to anything
non-empty causes execution to be traced. In the future we may give more
specific meaning to the value of the variable.
The user's prompt is not traced unless you run it explicitly. Events are
also not traced because it is noisy; however autoloading is.
Fixes#3427
Previously, tab-completion would move the cursor to the end of the current token, even
if no completion is inserted. This commit defers moving the cursor until we insert a completion.
Fixes#4124
Fish completes parts of words split by the separators, so things like
`dd if=/dev/sd<TAB>` work.
This commit improves interactive completion if completion strings legitimately
contain '=' or ':'. Consider this example where completion will suggest
a🅰️1 and other files in the cwd in addition to a:1
touch a:1; complete -C'ls a:'
This behavior remains unchanged, but this commit allows to quote or escape
separators, so that e.g. `ls "a:<TAB>` and `ls a\:<TAB>` successfully complete
the filename.
This also makes the completion insert those escapes automatically unless
already quoted.
So `ls a<TAB>` will give `ls a\:1`.
Both changes match bash's behavior.
This exitted if the cursor was at the end of the line as well (i.e. if
delete-char failed). That's a bit too eager.
Also documentation, which should have already been included.
We used to have a global notion of "is the shell interactive" but soon we
will want to have multiple independent execution threads, only some of
which may be interactive. Start tracking this data per-parser.
This makes the following changes:
1. Events in background threads are executed in those threads, instead of
being silently dropped
2. Blocked events are now per-parser instead of global
3. Events are posted in builtin_set instead of within the environment stack
The last one means that we no longer support event handlers for implicit
sets like (example) argv. Instead only the `set` builtin (and also `cd`)
post variable-change events.
Events from universal variable changes are still not fully rationalized.
Now that our interactive signal handlers are a strict superset of
non-interactive ones, there is no reason to "reset" signals or take action
when becoming non-interactive. Clean up how signal handlers get installed.
is_interactive_read is a suspicious flag which prevents a call to
parser_t::skip_all_blocks from a ^C signal handler. However we end
up skipping the blocks later when we exit the read loop.
This flag seems unnecessary. Bravely remove it.
Otherwise we'd undo the history search when you press e.g. execute,
which means you'd execute the search term.
Only `cancel` should walk it back, like it previously did hardcoded to
escape.
Fixes#5891.
We previously checked if fish_mode_prompt existed as a function, but
that's a bad change for those who already set it to an empty function
to have a mode display elsewhere.
