From 4c8fdf6e90353b5ab82f789c00ef624645e6f77f Mon Sep 17 00:00:00 2001 From: ridiculousfish Date: Sat, 26 Sep 2015 14:16:23 -0700 Subject: [PATCH] Add osx/pcre2/config.h which I forgot to check in too Really fixes the Xcode build --- osx/pcre2/config.h | 295 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 295 insertions(+) create mode 100644 osx/pcre2/config.h diff --git a/osx/pcre2/config.h b/osx/pcre2/config.h new file mode 100644 index 000000000..e76dd9f7c --- /dev/null +++ b/osx/pcre2/config.h @@ -0,0 +1,295 @@ +/* src/config.h. Generated from config.h.in by configure. */ +/* src/config.h.in. Generated from configure.ac by autoheader. */ + + +/* PCRE2 is written in Standard C, but there are a few non-standard things it +can cope with, allowing it to run on SunOS4 and other "close to standard" +systems. + +In environments that support the GNU autotools, config.h.in is converted into +config.h by the "configure" script. In environments that use CMake, +config-cmake.in is converted into config.h. If you are going to build PCRE2 "by +hand" without using "configure" or CMake, you should copy the distributed +config.h.generic to config.h, and edit the macro definitions to be the way you +need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, +so that config.h is included at the start of every source. + +Alternatively, you can avoid editing by using -D on the compiler command line +to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, +but if you do, default values will be taken from config.h for non-boolean +macros that are not defined on the command line. + +Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be defined +(conventionally to 1) for TRUE, and not defined at all for FALSE. All such +macros are listed as a commented #undef in config.h.generic. Macros such as +MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are +surrounded by #ifndef/#endif lines so that the value can be overridden by -D. + +PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if +HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make +sure both macros are undefined; an emulation function will then be used. */ + +/* By default, the \R escape sequence matches any Unicode line ending + character or sequence of characters. If BSR_ANYCRLF is defined (to any + value), this is changed so that backslash-R matches only CR, LF, or CRLF. + The build-time default can be overridden by the user of PCRE2 at runtime. + */ +/* #undef BSR_ANYCRLF */ + +/* If you are compiling for a system that uses EBCDIC instead of ASCII + character codes, define this macro to any value. When EBCDIC is set, PCRE2 + assumes that all input strings are in EBCDIC. If you do not define this + macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It + is not possible to build a version of PCRE2 that supports both EBCDIC and + UTF-8/16/32. */ +/* #undef EBCDIC */ + +/* In an EBCDIC environment, define this macro to any value to arrange for the + NL character to be 0x25 instead of the default 0x15. NL plays the role that + LF does in an ASCII/Unicode environment. */ +/* #undef EBCDIC_NL25 */ + +/* Define to 1 if you have the `bcopy' function. */ +#define HAVE_BCOPY 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_BZLIB_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_DIRENT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_DLFCN_H 1 + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_EDITLINE_READLINE_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_EDIT_READLINE_READLINE_H */ + +/* Define to 1 if you have the header file. */ +#define HAVE_INTTYPES_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_LIMITS_H 1 + +/* Define to 1 if you have the `memmove' function. */ +#define HAVE_MEMMOVE 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_MEMORY_H 1 + +/* Define if you have POSIX threads libraries and header files. */ +/* #undef HAVE_PTHREAD */ + +/* Have PTHREAD_PRIO_INHERIT. */ +/* #undef HAVE_PTHREAD_PRIO_INHERIT */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_READLINE_HISTORY_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_READLINE_READLINE_H */ + +/* Define to 1 if you have the header file. */ +#define HAVE_STDINT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STDLIB_H 1 + +/* Define to 1 if you have the `strerror' function. */ +#define HAVE_STRERROR 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STRINGS_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_STAT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_UNISTD_H 1 + +/* Define to 1 if the compiler supports simple visibility declarations. */ +#define HAVE_VISIBILITY 1 + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_WINDOWS_H */ + +/* Define to 1 if you have the header file. */ +#define HAVE_ZLIB_H 1 + +/* PCRE2 uses recursive function calls to handle backtracking while matching. + This can sometimes be a problem on systems that have stacks of limited + size. Define HEAP_MATCH_RECURSE to any value to get a version that doesn't + use recursion in the match() function; instead it creates its own stack by + steam using memory from the heap. For more detail, see the comments and + other stuff just above the match() function. */ +/* #undef HEAP_MATCH_RECURSE */ + +/* The value of LINK_SIZE determines the number of bytes used to store links + as offsets within the compiled regex. The default is 2, which allows for + compiled patterns up to 64K long. This covers the vast majority of cases. + However, PCRE2 can also be compiled to use 3 or 4 bytes instead. This + allows for longer patterns in extreme cases. */ +#define LINK_SIZE 2 + +/* Define to the sub-directory where libtool stores uninstalled libraries. */ +#define LT_OBJDIR ".libs/" + +/* The value of MATCH_LIMIT determines the default number of times the + internal match() function can be called during a single execution of + pcre2_match(). There is a runtime interface for setting a different limit. + The limit exists in order to catch runaway regular expressions that take + for ever to determine that they do not match. The default is set very large + so that it does not accidentally catch legitimate cases. */ +#define MATCH_LIMIT 10000000 + +/* The above limit applies to all calls of match(), whether or not they + increase the recursion depth. In some environments it is desirable to limit + the depth of recursive calls of match() more strictly, in order to restrict + the maximum amount of stack (or heap, if HEAP_MATCH_RECURSE is defined) + that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive + calls of match(). To have any useful effect, it must be less than the value + of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There + is a runtime method for setting a different limit. */ +#define MATCH_LIMIT_RECURSION MATCH_LIMIT + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#define MAX_NAME_COUNT 10000 + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#define MAX_NAME_SIZE 32 + +/* The value of NEWLINE_DEFAULT determines the default newline character + sequence. PCRE2 client programs can override this by selecting other values + at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5 + (ANYCRLF). */ +#define NEWLINE_DEFAULT 2 + +/* Name of package */ +#define PACKAGE "pcre2" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "PCRE2" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "PCRE2 10.20" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "pcre2" + +/* Define to the home page for this package. */ +#define PACKAGE_URL "" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "10.20" + +/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested + parentheses (of any kind) in a pattern. This limits the amount of system + stack that is used while compiling a pattern. */ +#define PARENS_NEST_LIMIT 250 + +/* The value of PCRE2GREP_BUFSIZE determines the size of buffer used by + pcre2grep to hold parts of the file it is searching. This is also the + minimum value. The actual amount of memory used by pcre2grep is three times + this number, because it allows for the buffering of "before" and "after" + lines. */ +#define PCRE2GREP_BUFSIZE 20480 + +/* to make a symbol visible */ +#define PCRE2POSIX_EXP_DECL extern __attribute__ ((visibility ("default"))) + +/* to make a symbol visible */ +#define PCRE2POSIX_EXP_DEFN extern __attribute__ ((visibility ("default"))) + +/* Define to any value to include debugging code. */ +/* #undef PCRE2_DEBUG */ + +/* to make a symbol visible */ +#define PCRE2_EXP_DECL extern __attribute__ ((visibility ("default"))) + + +/* If you are compiling for a system other than a Unix-like system or + Win32, and it needs some magic to be inserted before the definition + of a function that is exported by the library, define this macro to + contain the relevant magic. If you do not define this macro, a suitable + __declspec value is used for Windows systems; in other environments + "extern" is used for a C compiler and "extern C" for a C++ compiler. + This macro apears at the start of every exported function that is part + of the external API. It does not appear on functions that are "external" + in the C sense, but which are internal to the library. */ +#define PCRE2_EXP_DEFN __attribute__ ((visibility ("default"))) + +/* Define to any value if linking statically (TODO: make nice with Libtool) */ +#define PCRE2_STATIC 1 + +/* Define to necessary symbol if this constant uses a non-standard name on + your system. */ +/* #undef PTHREAD_CREATE_JOINABLE */ + +/* Define to 1 if you have the ANSI C header files. */ +#define STDC_HEADERS 1 + +/* Define to any value to enable support for Just-In-Time compiling. */ +/* #undef SUPPORT_JIT */ + +/* Define to any value to allow pcre2grep to be linked with libbz2, so that it + is able to handle .bz2 files. */ +/* #undef SUPPORT_LIBBZ2 */ + +/* Define to any value to allow pcre2test to be linked with libedit. */ +/* #undef SUPPORT_LIBEDIT */ + +/* Define to any value to allow pcre2test to be linked with libreadline. */ +/* #undef SUPPORT_LIBREADLINE */ + +/* Define to any value to allow pcre2grep to be linked with libz, so that it + is able to handle .gz files. */ +/* #undef SUPPORT_LIBZ */ + +/* Define to any value to enable JIT support in pcre2grep. */ +/* #undef SUPPORT_PCRE2GREP_JIT */ + +/* Define to any value to enable the 16 bit PCRE2 library. */ +/* #undef SUPPORT_PCRE2_16 */ + +/* Define to any value to enable the 32 bit PCRE2 library. */ +#define SUPPORT_PCRE2_32 /**/ + +/* Define to any value to enable the 8 bit PCRE2 library. */ +/* #undef SUPPORT_PCRE2_8 */ + +/* Define to any value to enable support for Unicode and UTF encoding. This + will work even in an EBCDIC environment, but it is incompatible with the + EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or* + ASCII/Unicode, but not both at once. */ +#define SUPPORT_UNICODE /**/ + +/* Define to any value for valgrind support to find invalid memory reads. */ +/* #undef SUPPORT_VALGRIND */ + +/* Version number of package */ +#define VERSION "10.20" + +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ + +/* Define to the type of a signed integer type of width exactly 64 bits if + such a type exists and the standard includes do not define it. */ +/* #undef int64_t */ + +/* Define to `unsigned int' if does not define. */ +/* #undef size_t */