Change formula from: "Used/Size * 100" to "Used/(Used + Avail) * 100".
This formula also works if "Used" and "Avail" do not add up to "Size",
which is the case if there are reserved disk blocks.
When doing
ln b b~
ln -f --b=simple a b
First, we create a backup of b
Then, we force the override of a => b but we make sure that the backup is
done.
So, we had a bug in the ordering of the actions.
we were first removing b. Therefore, losing the capability to do a backup of this.
Change formula from: "Used/Size * 100" to "Used/(Used + Avail) * 100".
This formula also works if "Used" and "Avail" do not add up to "Size",
which is the case if there are reserved disk blocks.
Previously, individual file sizes were used to compute the number width, which
would cause misalignment when the total has a greater number of digits, and is
different from the behavior of GNU wc
```
$ ./target/debug/wc -w -l -m -c -L deny.toml GNUmakefile
95 422 3110 3110 85 deny.toml
349 865 6996 6996 196 GNUmakefile
444 1287 10106 10106 196 total
$ wc -w -l -m -c -L deny.toml GNUmakefile
95 422 3110 3110 85 deny.toml
349 865 6996 6996 196 GNUmakefile
444 1287 10106 10106 196 total
```
"df --output ." was treated as "df --output=." and hence "." was
interpreted as a column name. With this commit, "." is treated as
an argument on its own.
Fixes#3324
Print a usage error when duplicat column names are specified to the
`--output` command-line argument. For example,
$ df --output=source,source
df: option --output: field ‘source’ used more than once
Try 'df --help' for more information.
Implement the "File" column in the `df` output table. Before this
commit, a blank entry appeared in the "File" column for each
row. After this commit, a "-" entry appears when `df` is run with no
positional arguments and the filename appears when run with positional
arguments. For example:
$ touch a b c && df --output=target,file a b c
Mounted on File
/ a
/ b
/ c
Produce a usage error on an invalid signal argument. For example,
$ timeout --signal=invalid 1 sleep 0
timeout: 'invalid': invalid signal
Try 'timeout --help' for more information.
Return an error when a negative interval is provided as the argument
to `uucore::parse_time::from_str()`, since a `Duration` should only be
non-negative.
Fix a bug in the behavior of `split -e -n NUM` when the input file is
empty. Previously, it would panic due to overflow when subtracting 1
from 0. After this change, it will terminate successfully and produce
no output chunks.
Use `Duration::saturating_mul()` to avoid a panic due to overflow in
`uucore::parse_time::from_str()`. This change prevents panic on very
large arguments to timeout and sleep.
These are the first half of changes needed to pass the dd/bytes.sh tests:
- Add iseek and oseek options (additive with skip and seek options)
- Implement tests for the new flags, matching those from dd/bytes.sh
Implement distributing lines of a file in a round-robin manner to a
specified number of chunks. For example,
$ (seq 1 10 | split -n r/3) && head -v xa[abc]
==> xaa <==
1
4
7
10
==> xab <==
2
5
8
==> xac <==
3
6
9
Previously, given 'cp -P a b', where 'a' and 'b' were both symlinks, cp
would end up replacing the target of 'b'.
Signed-off-by: Ryan Gonzalez <ryan.gonzalez@collabora.com>
Fix a bug where `timeout --preserve-status` was not correctly
preserving the status code of the child process if it timed out. When
that happens, the status code of the child process is considered to be
the signal number (in this case, `SIGTERM`). The exit status of
`timeout` is then 128 plus the numeric code associated with `SIGTERM`.
* Adds support for mount path prefix matching and input path
canonicalization
- Sorts mount paths in reverse lexicographical order
- Canonicalize all paths and clear invalid paths
- Checking of mount path prefix matches input path
Implement the `--line-bytes` option to `split`. In this mode, the
program tries to write as many lines of the input as possible to each
chunk of output without exceeding a specified byte limit. The new
`LineBytesChunkWriter` struct represents this functionality.
Implement the `--output` command-line argument, which allows
specifying an exact sequence of columns to display in the output
table. For example,
$ df --output=source,fstype | head -n3
Filesystem Type
udev devtmpfs
tmpfs tmpfs
(The spacing does not exactly match the spacing of GNU `df` yet.)
Fixes#3057.
Correct the column header printed by `df` when the `--block-size`
argument has a value that is a multiple of 1024. After this commit,
the header looks like "1K" or "4M" or "117G", etc., depending on the
particular value of the block size. For example:
$ df --block-size=1024 | head -n1
Filesystem 1K-blocks Used Available Use% Mounted on
$ df --block-size=2048 | head -n1
Filesystem 2K-blocks Used Available Use% Mounted on
$ df --block-size=3072 | head -n1
Filesystem 3K-blocks Used Available Use% Mounted on
$ df --block-size=4096 | head -n1
Filesystem 4K-blocks Used Available Use% Mounted on
Add support for the `--total` option to `df`, which displays the total
of each numeric column. For example,
$ df --total
Filesystem 1K-blocks Used Available Use% Mounted on
udev 3858016 0 3858016 0% /dev
...
/dev/loop14 63488 63488 0 100% /snap/core20/1361
total 258775268 98099712 148220200 40% -
Implement `-n l/k/N` option, where the `k`th chunk of the input file
is written to stdout. For example,
$ seq -w 0 99 > f; split -n l/3/10 f
20
21
22
23
24
25
26
27
28
29
Add support for `split -n l/NUM`. Previously, `split` only supported
`-n NUM`, which splits a file into `NUM` chunks by byte. The `-n
l/NUM` strategy splits a file into `NUM` chunks without splitting
lines across chunks.
https://github.com/uutils/coreutils/pull/3084 (2a333ab391) had some
missing coverage and was merged before I had a chance to fix it.
This PR adds some coverage / improved error messages that were missing
from that previous PR.
If `conv=block,sync` command-line arguments are given and there is at
least one partial record read from the input (for example, if the
length of the input is not divisible by the value of the `ibs`
argument), then output an extra block of `cbs` spaces.
For example, no extra spaces are printed in this example because the
input is of length 10, a multiple of `ibs`:
$ printf "012\nabcde\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde$
2+0 records in
0+1 records out
But in this example, 5 extra spaces are printed because the length of
the input is not a multiple of `ibs`:
$ printf "012\nabcdefg\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde $
2+1 records in
0+1 records out
1 truncated record
The number of spaces printed is the size of the conversion block,
given by `cbs`.
Prevent `dd` from terminating with an error when given the
command-line argument `of=/dev/null`. This commit allows the call to
`File::set_len()` to result in an error without causing the process to
terminate prematurely.
Place the "truncated records" line below the "records out" line in the
status report produced by `dd` and properly handle the singularization
of the word "record" in the case of 1 truncated record. This matches
the behavior of GNU `dd`.
For example
$ printf "ab" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
1 truncated record
$ printf "ab\ncd\n" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
2 truncated records
Add the `-e` flag, which indicates whether to elide (that is, remove)
empty files that would have been created by the `-n` option.
The `-n` command-line argument gives a specific number of chunks into
which the input files will be split. If the number of chunks is
greater than the number of bytes, then empty files will be created for
the excess chunks. But if `-e` is given, then empty files will not be
created.
For example, contrast
$ printf 'a\n' > f && split -e -n 3 f && cat xaa xab xac
a
cat: xac: No such file or directory
with
$ printf 'a\n' > f && split -n 3 f && cat xaa xab xac
a
Clean up unit tests in the `dd` crate to make them easier to
manage. This commit does a few things.
* move test cases that test the complete functionality of the `dd`
program from the `dd_unit_tests` module up to the
`tests/by-util/test_dd.rs` module so that they can take advantage of
the testing framework and common testing tools provided by uutils,
* move test cases that test internal functions of the `dd`
implementation into the `tests` module within `dd.rs` so that they
live closer to the code they are testing,
* replace test cases defined by macros with test cases defined by
plain old functions to make the test cases easier to read at a
glance.
* include io-blksize parameter
* format changes for including io-blksize
Co-authored-by: DevSabb <devsabb@local>
Co-authored-by: Sylvestre Ledru <sylvestre@debian.org>
Add support for the `-x` command-line option to `split`. This option
causes `split` to produce filenames with hexadecimal suffixes instead
of the default alphabetic suffixes.
Correct the accounting for partial records written by `dd` to the
output file. After this commit, if fewer than `obs` bytes are written,
then that is counted as a partial record. For example,
$ printf 'abc' | dd bs=2 status=noxfer > /dev/null
1+1 records in
1+1 records out
That is, one complete record and one partial record are read from the
input, one complete record and one partial record are written to the
output. Previously, `dd` reported two complete records and zero
partial records written to the output in this case.
Change the `filter_mount_list()` function so that it always produces
the same order of `MountInfo` objects. This change ultimately results
in `df` printing its table of filesystems in the same order on each
execution. Previously, the table was in an arbitrary order because the
`MountInfo` objects were read from a `HashMap`.
Fixes#3086.
* ls: add new optional arguments to --classify flag
The --classify flag in ls now takes an option when argument
that may have the values always, auto and none.
Modified clap argument to allow an optional parameter and
changed the classify flag value parsing logic to account for
this change.
* ls: add test for indicator-style, ind and classify with value none
* ls: require option paramter to --classify to use a = to specify flag value
* ls: account for all the undocumented possible values for the --classify flag
Added the other values for the --classify flag along with modifications to tests.
Also documented the inconsistency between GNU coreutils because we accept the
flag value even for the short version of the flag.
Replace `ByteSplitter` and `LineSplitter` with `ByteChunkWriter` and
`LineChunkWriter` respectively. This results in a more maintainable
design and an increase in the speed of splitting by lines.
Correct the `test_split::test_suffixes_exhausted` test case so that it
actually exercises the intended behavior of `split`. Previously, the
test fixture contained 26 bytes. After this commit, the test fixture
contains 27 bytes. When using a suffix width of one, only 26 filenames
should be available when naming chunk files---one for each lowercase
ASCII letter. This commit ensures that the filenames will be exhausted
as intended by the test.
Show a warning if the `skip=N` command-line argument would cause `dd`
to skip past the end of the input. For example:
$ printf "abcd" | dd bs=1 skip=5 count=0 status=noxfer
'standard input': cannot skip to specified offset
0+0 records in
0+0 records out
Show a warning when a block size includes "0x" since this is
ambiguous: the user may have meant "multiply the next number by zero"
or they may have meant "the following characters should be interpreted
as a hexadecimal number".
When specifying `seek=N` and *not* specifying `conv=notrunc`, truncate
the output file to `N` blocks instead of truncating it to zero before
starting to write output. For example
$ printf "abc" > outfile
$ printf "123" | dd bs=1 skip=1 seek=1 count=1 status=noxfer of=outfile
1+0 records in
1+0 records out
$ cat outfile
a2
Fixes#3068.
When this option is present, the files argument is not processed. This option processes the file list from provided file, splitting them by the ascii NUL (\0) character. When files0-from is '-', the file list is processed from stdin.
Using this escaped character will cause `printf` to stop generating characters.
For instance,
```rust
hbina@akarin ~/g/uutils (hbina-add-test-for-additional-escape)> cargo run --quiet -- printf "%s\c%s" a b
a⏎
```
Signed-off-by: Hanif Ariffin <hanif.ariffin.4326@gmail.com>
* test_sort: Output sorted files to a file with different name
Signed-off-by: Hanif Bin Ariffin <hanif.ariffin.43262@gmail.com>
* Fix the test by saving the environment variable
Signed-off-by: Hanif Bin Ariffin <hanif.ariffin.43262@gmail.com>
Co-authored-by: Hanif Bin Ariffin <hanif.ariffin.43262@gmail.com>
This avoids hacking around the short options of these command line
arguments that have been introduced by clap. Additionally, we test and
correctly handle the combination of both version and help. The GNU
binary will ignore both arguments in this case while clap would perform
the first one. A test for this edge case was added.
This allows for `-t` to take invalid unicode (but still single-byte) values
on unix-like platforms. Other platforms, which as of the time of this commit
do not support `OsStr::as_bytes()`, could possibly be supported in the future,
but would require design decisions as to what that means.
Prevent usize underflow when reducing the size of a file by more than
its current size. For example, if `f` is a file with 3 bytes, then
truncate -s-5 f
will now set the size of the file to 0 instead of causing a panic.
