Produce a usage error on an invalid signal argument. For example,
$ timeout --signal=invalid 1 sleep 0
timeout: 'invalid': invalid signal
Try 'timeout --help' for more information.
Return an error when a negative interval is provided as the argument
to `uucore::parse_time::from_str()`, since a `Duration` should only be
non-negative.
Fix a bug in the behavior of `split -e -n NUM` when the input file is
empty. Previously, it would panic due to overflow when subtracting 1
from 0. After this change, it will terminate successfully and produce
no output chunks.
Use `Duration::saturating_mul()` to avoid a panic due to overflow in
`uucore::parse_time::from_str()`. This change prevents panic on very
large arguments to timeout and sleep.
These are the first half of changes needed to pass the dd/bytes.sh tests:
- Add iseek and oseek options (additive with skip and seek options)
- Implement tests for the new flags, matching those from dd/bytes.sh
Implement distributing lines of a file in a round-robin manner to a
specified number of chunks. For example,
$ (seq 1 10 | split -n r/3) && head -v xa[abc]
==> xaa <==
1
4
7
10
==> xab <==
2
5
8
==> xac <==
3
6
9
Previously, given 'cp -P a b', where 'a' and 'b' were both symlinks, cp
would end up replacing the target of 'b'.
Signed-off-by: Ryan Gonzalez <ryan.gonzalez@collabora.com>
Fix a bug where `timeout --preserve-status` was not correctly
preserving the status code of the child process if it timed out. When
that happens, the status code of the child process is considered to be
the signal number (in this case, `SIGTERM`). The exit status of
`timeout` is then 128 plus the numeric code associated with `SIGTERM`.
* Adds support for mount path prefix matching and input path
canonicalization
- Sorts mount paths in reverse lexicographical order
- Canonicalize all paths and clear invalid paths
- Checking of mount path prefix matches input path
Implement the `--line-bytes` option to `split`. In this mode, the
program tries to write as many lines of the input as possible to each
chunk of output without exceeding a specified byte limit. The new
`LineBytesChunkWriter` struct represents this functionality.
Implement the `--output` command-line argument, which allows
specifying an exact sequence of columns to display in the output
table. For example,
$ df --output=source,fstype | head -n3
Filesystem Type
udev devtmpfs
tmpfs tmpfs
(The spacing does not exactly match the spacing of GNU `df` yet.)
Fixes#3057.
Correct the column header printed by `df` when the `--block-size`
argument has a value that is a multiple of 1024. After this commit,
the header looks like "1K" or "4M" or "117G", etc., depending on the
particular value of the block size. For example:
$ df --block-size=1024 | head -n1
Filesystem 1K-blocks Used Available Use% Mounted on
$ df --block-size=2048 | head -n1
Filesystem 2K-blocks Used Available Use% Mounted on
$ df --block-size=3072 | head -n1
Filesystem 3K-blocks Used Available Use% Mounted on
$ df --block-size=4096 | head -n1
Filesystem 4K-blocks Used Available Use% Mounted on
Add support for the `--total` option to `df`, which displays the total
of each numeric column. For example,
$ df --total
Filesystem 1K-blocks Used Available Use% Mounted on
udev 3858016 0 3858016 0% /dev
...
/dev/loop14 63488 63488 0 100% /snap/core20/1361
total 258775268 98099712 148220200 40% -
Implement `-n l/k/N` option, where the `k`th chunk of the input file
is written to stdout. For example,
$ seq -w 0 99 > f; split -n l/3/10 f
20
21
22
23
24
25
26
27
28
29
Add support for `split -n l/NUM`. Previously, `split` only supported
`-n NUM`, which splits a file into `NUM` chunks by byte. The `-n
l/NUM` strategy splits a file into `NUM` chunks without splitting
lines across chunks.
https://github.com/uutils/coreutils/pull/3084 (2a333ab391) had some
missing coverage and was merged before I had a chance to fix it.
This PR adds some coverage / improved error messages that were missing
from that previous PR.
If `conv=block,sync` command-line arguments are given and there is at
least one partial record read from the input (for example, if the
length of the input is not divisible by the value of the `ibs`
argument), then output an extra block of `cbs` spaces.
For example, no extra spaces are printed in this example because the
input is of length 10, a multiple of `ibs`:
$ printf "012\nabcde\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde$
2+0 records in
0+1 records out
But in this example, 5 extra spaces are printed because the length of
the input is not a multiple of `ibs`:
$ printf "012\nabcdefg\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde $
2+1 records in
0+1 records out
1 truncated record
The number of spaces printed is the size of the conversion block,
given by `cbs`.
Prevent `dd` from terminating with an error when given the
command-line argument `of=/dev/null`. This commit allows the call to
`File::set_len()` to result in an error without causing the process to
terminate prematurely.
Place the "truncated records" line below the "records out" line in the
status report produced by `dd` and properly handle the singularization
of the word "record" in the case of 1 truncated record. This matches
the behavior of GNU `dd`.
For example
$ printf "ab" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
1 truncated record
$ printf "ab\ncd\n" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
2 truncated records
Add the `-e` flag, which indicates whether to elide (that is, remove)
empty files that would have been created by the `-n` option.
The `-n` command-line argument gives a specific number of chunks into
which the input files will be split. If the number of chunks is
greater than the number of bytes, then empty files will be created for
the excess chunks. But if `-e` is given, then empty files will not be
created.
For example, contrast
$ printf 'a\n' > f && split -e -n 3 f && cat xaa xab xac
a
cat: xac: No such file or directory
with
$ printf 'a\n' > f && split -n 3 f && cat xaa xab xac
a
Clean up unit tests in the `dd` crate to make them easier to
manage. This commit does a few things.
* move test cases that test the complete functionality of the `dd`
program from the `dd_unit_tests` module up to the
`tests/by-util/test_dd.rs` module so that they can take advantage of
the testing framework and common testing tools provided by uutils,
* move test cases that test internal functions of the `dd`
implementation into the `tests` module within `dd.rs` so that they
live closer to the code they are testing,
* replace test cases defined by macros with test cases defined by
plain old functions to make the test cases easier to read at a
glance.
