* test/cp: -p changes ctime and added sleep for better timestamp testing
* test/cp: add nanoseconds checking for copied timestamps
* test/cp: made compilable on other OSes
* test/cp: added error messages to assert_eq calls
* cp: Refactor `reflink`/`sparse` handling to enable `--sparse` flag
`--sparse` and `--reflink` options have a lot of similarities:
- They have similar options (`always`, `never`, `auto`)
- Both need OS specific handling
- They can be mutually exclusive
Prior to this change, `sparse` was defined as `CopyMode`, but `reflink`
wasn't. Given the similarities, it makes sense to handle them similarly.
The idea behind this change is to move all OS specific file copy
handling in the `copy_on_write_*` functions. Those function then
dispatch to the correct logic depending on the arguments (at the moment,
the tuple `(reflink, sparse)`).
Also, move the handling of `--reflink=never` from `copy_file` to the
`copy_on_write_*` functions, at the cost of a bit of code duplication,
to allow `copy_on_write_*` to handle all cases (and later handle
`--reflink=never` with `--sparse`).
* cp: Implement `--sparse` flag
This begins to address #3362
At the moment, only the `--sparse=always` logic matches the requirement
form GNU cp info page, i.e. always make holes in destination when
possible.
Sparse copy is done by copying the source to the destination block by
block (blocks being of the destination's fs block size). If the block
only holds NUL bytes, we don't write to the destination.
About `--sparse=auto`: according to GNU cp info page, the destination
file will be made sparse if the source file is sparse as well. The next
step are likely to use `lseek` with `SEEK_HOLE` detect if the source
file has holes. Currently, this has the same behaviour as
`--sparse=never`. This `SEEK_HOLE` logic can also be applied to
`--sparse=always` to improve performance when copying sparse files.
About `--sparse=never`: from my understanding, it is not guaranteed that
Rust's `fs::copy` will always produce a file with no holes, as
["platform-specific behavior may change in the
future"](https://doc.rust-lang.org/std/fs/fn.copy.html#platform-specific-behavior)
About other platforms:
- `macos`: The solution may be to use `fcntl` command `F_PUNCHHOLE`.
- `windows`: I only see `FSCTL_SET_SPARSE`.
This should pass the following GNU tests:
- `tests/cp/sparse.sh`
- `tests/cp/sparse-2.sh`
- `tests/cp/sparse-extents.sh`
- `tests/cp/sparse-extents-2.sh`
`sparse-perf.sh` needs `--sparse=auto`, and in particular a way to skip
holes in the source file.
Co-authored-by: Sylvestre Ledru <sylvestre@debian.org>
* ls: Implement --zero flag. (#2929)
This flag can be used to provide a easy machine parseable output from
ls, as discussed in the GNU bug report
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=49716.
There are some peculiarities with this flag:
- Current implementation of GNU ls of the `--zero` flag implies some
other flags. Those can be overridden by setting those flags after
`--zero` in the command line.
- This flag is not compatible with `--dired`. This patch is not 100%
compliant with GNU ls: GNU ls `--zero` will fail if `--dired` and
`-l` are set, while with this patch only `--dired` is needed for the
command to fail.
We also add `--dired` flag to the parser, with no additional behaviour
change.
Testing done:
```
$ bash util/build-gnu.sh
[...]
$ bash util/run-gnu-test.sh tests/ls/zero-option.sh
[...]
PASS: tests/ls/zero-option.sh
============================================================================
Testsuite summary for GNU coreutils 9.1.36-8ec11
============================================================================
# TOTAL: 1
# PASS: 1
# SKIP: 0
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
============================================================================
```
* Use the US way to spell Behavior
* Fix formatting with cargo fmt -- tests/by-util/test_ls.rs
* Simplify --zero flag overriding logic by using index_of
Also, allow multiple --zero flags, as this is possible with GNU ls
command. Only the last one is taken into account.
Co-authored-by: Sylvestre Ledru <sledru@mozilla.com>
* wc: specialize scanning loop on settings.
The primary computational loop in wc (iterating over all the
characters and computing word lengths, etc) is configured by a
number of boolean options that control the text-scanning behavior.
If we monomorphize the code loop for each possible combination of
scanning configurations, the rustc is able to generate better code
for each instantiation, at the least by removing the conditional
checks on each iteration, and possibly by allowing things like
vectorization.
On my computer (aarch64/macos), I am seeing at least a 5% performance
improvement in release builds on all wc flag configurations
(other than those that were already specialized) against
odyssey1024.txt, with wc -l showing the greatest improvement at 15%.
* Reduce the size of the wc dispatch table by half.
By extracting the handling of hand-written fast-paths to the
same dispatch as the automatic specializations, we can avoid
needing to pass `show_bytes` as a const generic to
`word_count_from_reader_specialized`. Eliminating this parameter
halves the number of arms in the dispatch.
* ls: handle looping symlinks infinite printing
* ls: better coloring and printing symlinks when dereferenced
* tests/ls: add dereferencing and symlink loop tests
* ls: reformat changed using rustfmt
* ls: follow clippy advice for cleaner code
* uucore/fs: fix FileInformation to open directory handles in Windows as
well
This is part of fixing the tee tests. 'yes' is used by the GNU test
suite to identify what the SIGPIPE exit code is on the target
platform. By trapping SIGPIPE, it creates a requirement that other
utilities also trap SIGPIPE (and exit 0 after SIGPIPE). This is
sometimes at odds with their desired behaviour.
This has the following behaviours. On Unix:
- The default is to exit on pipe errors, and warn on other errors.
- "--output-error=warn" means to warn on all errors
- "--output-error", "--output-error=warn-nopipe" and "-p" all mean
that pipe errors are suppressed, all other errors warn.
- "--output-error=exit" means to warn and exit on all errors.
- "--output-error=exit-nopipe" means to suppress pipe errors, and to
warn and exit on all other errors.
On non-Unix platforms, all pipe behaviours are ignored, so the default
is effectively "--output-error=warn" and "warn-nopipe" is identical.
The only meaningful option is "--output-error=exit" which is identical
to "--output-error=exit-nopipe" on these platforms.
Note that warnings give a non-zero exit code, but do not halt writing
to non-erroring targets.
Fix a bug in which `cp` incorrectly exited with an error when
attempting to copy the attributes of a dangling symbolic link (that
is, when running `cp -P -p`).
Fixes#3531.
* tail: reduce CPU load for polling
This reduces the CPU load for polling drastically (from ~80% down to ~5%)
by removing/fixing several previous workarounds related to polling,
while still passing all related GNU test-suite checks.
* set Notify::PollWatcher delay to: sleep_sec/10 instead of
sleep_sec/100
* set recv_timeout to sleep_sec instead of sleep_sec/100
* remove the manual polling of watched files
Bugs:
* fix an issue with headers to consistently pass
"test_follow_name_retry_headers" and "gnu/tests/tail-2/overlay-headers.sh"
Code clean-up and refactor
* make fields of struct FileHandling private (and add getters/setters)
to ensure that the paths are absolute and match the paths returned by
Notify::Events
* replace calls to "crash!" with "return USimpleError"
* clean-up formatting
When `--backup` is supplied, `cp` will take a backup of *destination* before *source* is copied. When `--backup=simple` is supplied, it is possible for the backup path for *destination* to equal the path for *source*, destroying source before the copy is made. This change prevents this by returning an error instead.
This fixes https://github.com/uutils/coreutils/issues/3629
Update `dd` to only print a concise form of the number of bytes with
an SI prefix (like "1 MB" or "2 GB") if the number is at least
1000. Similarly, only print the concise form with an IEC prefix (like
"1 MiB" or "2 GiB") if the number is at least 1024. For example,
$ head -c 999 /dev/zero | dd > /dev/null
1+1 records in
1+1 records out
999 bytes copied, 0.0 s, 999.0 KB/s
$ head -c 1000 /dev/zero | dd > /dev/null
1+1 records in
1+1 records out
1000 bytes (1000 B) copied, 0.0 s, 1000.0 KB/s
$ head -c 1024 /dev/zero | dd > /dev/null
2+0 records in
2+0 records out
1024 bytes (1 KB, 1024 B) copied, 0.0 s, 1.0 MB/s
Make `mktemp` exit with an error if the `--suffix` option is the empty
string and the template argument does not end in an "X". Previously,
the program succeeded.
Before this commit,
$ mktemp --suffix= aXXXb
apBEb
After this commit,
$ mktemp --suffix= aXXXb
mktemp: with --suffix, template 'aXXXb' must end in X
