Previously, given 'cp -P a b', where 'a' and 'b' were both symlinks, cp
would end up replacing the target of 'b'.
Signed-off-by: Ryan Gonzalez <ryan.gonzalez@collabora.com>
Fix a bug where `timeout --preserve-status` was not correctly
preserving the status code of the child process if it timed out. When
that happens, the status code of the child process is considered to be
the signal number (in this case, `SIGTERM`). The exit status of
`timeout` is then 128 plus the numeric code associated with `SIGTERM`.
* Adds support for mount path prefix matching and input path
canonicalization
- Sorts mount paths in reverse lexicographical order
- Canonicalize all paths and clear invalid paths
- Checking of mount path prefix matches input path
Implement the `--line-bytes` option to `split`. In this mode, the
program tries to write as many lines of the input as possible to each
chunk of output without exceeding a specified byte limit. The new
`LineBytesChunkWriter` struct represents this functionality.
Implement the `--output` command-line argument, which allows
specifying an exact sequence of columns to display in the output
table. For example,
$ df --output=source,fstype | head -n3
Filesystem Type
udev devtmpfs
tmpfs tmpfs
(The spacing does not exactly match the spacing of GNU `df` yet.)
Fixes#3057.
Correct the column header printed by `df` when the `--block-size`
argument has a value that is a multiple of 1024. After this commit,
the header looks like "1K" or "4M" or "117G", etc., depending on the
particular value of the block size. For example:
$ df --block-size=1024 | head -n1
Filesystem 1K-blocks Used Available Use% Mounted on
$ df --block-size=2048 | head -n1
Filesystem 2K-blocks Used Available Use% Mounted on
$ df --block-size=3072 | head -n1
Filesystem 3K-blocks Used Available Use% Mounted on
$ df --block-size=4096 | head -n1
Filesystem 4K-blocks Used Available Use% Mounted on
Add support for the `--total` option to `df`, which displays the total
of each numeric column. For example,
$ df --total
Filesystem 1K-blocks Used Available Use% Mounted on
udev 3858016 0 3858016 0% /dev
...
/dev/loop14 63488 63488 0 100% /snap/core20/1361
total 258775268 98099712 148220200 40% -
Implement `-n l/k/N` option, where the `k`th chunk of the input file
is written to stdout. For example,
$ seq -w 0 99 > f; split -n l/3/10 f
20
21
22
23
24
25
26
27
28
29
Add support for `split -n l/NUM`. Previously, `split` only supported
`-n NUM`, which splits a file into `NUM` chunks by byte. The `-n
l/NUM` strategy splits a file into `NUM` chunks without splitting
lines across chunks.
https://github.com/uutils/coreutils/pull/3084 (2a333ab391) had some
missing coverage and was merged before I had a chance to fix it.
This PR adds some coverage / improved error messages that were missing
from that previous PR.
If `conv=block,sync` command-line arguments are given and there is at
least one partial record read from the input (for example, if the
length of the input is not divisible by the value of the `ibs`
argument), then output an extra block of `cbs` spaces.
For example, no extra spaces are printed in this example because the
input is of length 10, a multiple of `ibs`:
$ printf "012\nabcde\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde$
2+0 records in
0+1 records out
But in this example, 5 extra spaces are printed because the length of
the input is not a multiple of `ibs`:
$ printf "012\nabcdefg\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde $
2+1 records in
0+1 records out
1 truncated record
The number of spaces printed is the size of the conversion block,
given by `cbs`.
Prevent `dd` from terminating with an error when given the
command-line argument `of=/dev/null`. This commit allows the call to
`File::set_len()` to result in an error without causing the process to
terminate prematurely.
Place the "truncated records" line below the "records out" line in the
status report produced by `dd` and properly handle the singularization
of the word "record" in the case of 1 truncated record. This matches
the behavior of GNU `dd`.
For example
$ printf "ab" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
1 truncated record
$ printf "ab\ncd\n" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
2 truncated records
Add the `-e` flag, which indicates whether to elide (that is, remove)
empty files that would have been created by the `-n` option.
The `-n` command-line argument gives a specific number of chunks into
which the input files will be split. If the number of chunks is
greater than the number of bytes, then empty files will be created for
the excess chunks. But if `-e` is given, then empty files will not be
created.
For example, contrast
$ printf 'a\n' > f && split -e -n 3 f && cat xaa xab xac
a
cat: xac: No such file or directory
with
$ printf 'a\n' > f && split -n 3 f && cat xaa xab xac
a
Clean up unit tests in the `dd` crate to make them easier to
manage. This commit does a few things.
* move test cases that test the complete functionality of the `dd`
program from the `dd_unit_tests` module up to the
`tests/by-util/test_dd.rs` module so that they can take advantage of
the testing framework and common testing tools provided by uutils,
* move test cases that test internal functions of the `dd`
implementation into the `tests` module within `dd.rs` so that they
live closer to the code they are testing,
* replace test cases defined by macros with test cases defined by
plain old functions to make the test cases easier to read at a
glance.
* include io-blksize parameter
* format changes for including io-blksize
Co-authored-by: DevSabb <devsabb@local>
Co-authored-by: Sylvestre Ledru <sylvestre@debian.org>
Add support for the `-x` command-line option to `split`. This option
causes `split` to produce filenames with hexadecimal suffixes instead
of the default alphabetic suffixes.
Correct the accounting for partial records written by `dd` to the
output file. After this commit, if fewer than `obs` bytes are written,
then that is counted as a partial record. For example,
$ printf 'abc' | dd bs=2 status=noxfer > /dev/null
1+1 records in
1+1 records out
That is, one complete record and one partial record are read from the
input, one complete record and one partial record are written to the
output. Previously, `dd` reported two complete records and zero
partial records written to the output in this case.
Change the `filter_mount_list()` function so that it always produces
the same order of `MountInfo` objects. This change ultimately results
in `df` printing its table of filesystems in the same order on each
execution. Previously, the table was in an arbitrary order because the
`MountInfo` objects were read from a `HashMap`.
Fixes#3086.
* ls: add new optional arguments to --classify flag
The --classify flag in ls now takes an option when argument
that may have the values always, auto and none.
Modified clap argument to allow an optional parameter and
changed the classify flag value parsing logic to account for
this change.
* ls: add test for indicator-style, ind and classify with value none
* ls: require option paramter to --classify to use a = to specify flag value
* ls: account for all the undocumented possible values for the --classify flag
Added the other values for the --classify flag along with modifications to tests.
Also documented the inconsistency between GNU coreutils because we accept the
flag value even for the short version of the flag.
Replace `ByteSplitter` and `LineSplitter` with `ByteChunkWriter` and
`LineChunkWriter` respectively. This results in a more maintainable
design and an increase in the speed of splitting by lines.
Correct the `test_split::test_suffixes_exhausted` test case so that it
actually exercises the intended behavior of `split`. Previously, the
test fixture contained 26 bytes. After this commit, the test fixture
contains 27 bytes. When using a suffix width of one, only 26 filenames
should be available when naming chunk files---one for each lowercase
ASCII letter. This commit ensures that the filenames will be exhausted
as intended by the test.
Show a warning if the `skip=N` command-line argument would cause `dd`
to skip past the end of the input. For example:
$ printf "abcd" | dd bs=1 skip=5 count=0 status=noxfer
'standard input': cannot skip to specified offset
0+0 records in
0+0 records out
Show a warning when a block size includes "0x" since this is
ambiguous: the user may have meant "multiply the next number by zero"
or they may have meant "the following characters should be interpreted
as a hexadecimal number".
When specifying `seek=N` and *not* specifying `conv=notrunc`, truncate
the output file to `N` blocks instead of truncating it to zero before
starting to write output. For example
$ printf "abc" > outfile
$ printf "123" | dd bs=1 skip=1 seek=1 count=1 status=noxfer of=outfile
1+0 records in
1+0 records out
$ cat outfile
a2
Fixes#3068.
When this option is present, the files argument is not processed. This option processes the file list from provided file, splitting them by the ascii NUL (\0) character. When files0-from is '-', the file list is processed from stdin.
Using this escaped character will cause `printf` to stop generating characters.
For instance,
```rust
hbina@akarin ~/g/uutils (hbina-add-test-for-additional-escape)> cargo run --quiet -- printf "%s\c%s" a b
a⏎
```
Signed-off-by: Hanif Ariffin <hanif.ariffin.4326@gmail.com>
* test_sort: Output sorted files to a file with different name
Signed-off-by: Hanif Bin Ariffin <hanif.ariffin.43262@gmail.com>
* Fix the test by saving the environment variable
Signed-off-by: Hanif Bin Ariffin <hanif.ariffin.43262@gmail.com>
Co-authored-by: Hanif Bin Ariffin <hanif.ariffin.43262@gmail.com>
This avoids hacking around the short options of these command line
arguments that have been introduced by clap. Additionally, we test and
correctly handle the combination of both version and help. The GNU
binary will ignore both arguments in this case while clap would perform
the first one. A test for this edge case was added.
This allows for `-t` to take invalid unicode (but still single-byte) values
on unix-like platforms. Other platforms, which as of the time of this commit
do not support `OsStr::as_bytes()`, could possibly be supported in the future,
but would require design decisions as to what that means.
Prevent usize underflow when reducing the size of a file by more than
its current size. For example, if `f` is a file with 3 bytes, then
truncate -s-5 f
will now set the size of the file to 0 instead of causing a panic.
Improve the error message that gets printed when a directory does not
exist. After this commit, the error message is
truncate: cannot open '{file}' for writing: No such file or directory
where `{file}` is the name of a file in a directory that does not
exist.
Change a word in the error message displayed when an increment value
of 0 is provided to `seq`. This commit changes the message from "Zero
increment argument" to "Zero increment value" to match the GNU `seq`
error message.
Add an error for division by zero. Previously, running `truncate -s /0
file` or `-s %0` would panic due to division by zero. After this
change, it writes an error message "division by zero" to stderr and
terminates with an error code.
Add support for the `-f FORMAT` option to `seq`. This option instructs
the program to render each value in the generated sequence using a
given `printf`-style floating point format. For example,
$ seq -f %.2f 0.0 0.1 0.5
0.00
0.10
0.20
0.30
0.40
0.50
Fixes issue #2616.
Fix a bug where `tail -f` would terminate with an error due to failing
to parse a UTF-8 string from a sequence of bytes read from the
followed file. This commit replaces the call to `BufRead::read_line()`
with a call to `BufRead::read_until()` so that any sequence of bytes
regardless of encoding can be read.
Fixes#1050.
Correct the behavior of `dd` with the `status=noxfer` option. Before
this commit, the status output was entirely suppressed (as happens
with `status=none`). This was incorrect behavior. After this commit,
the input/output counts are printed to stderr as expected.
For example,
$ printf "" | dd status=noxfer
0+0 records in
0+0 records out
This commit also updates a unit test that was enforcing the wrong
behavior.
Fix the behavior of truncate when given a non-existent file so that it
correctly creates the file before truncating it (unless the
`--no-create` option is also given).
Fix a bug when getting all but the first NUM lines or bytes of a file
via `tail -n +NUM <file>` or `tail -c +NUM <file>`. The bug only
existed when a file is given as an argument; it did not exist when the
input data came from stdin.
Support `-z` option when the input is not a seekable file. Previously,
the option was accepted by the argument parser, but it was being
ignored by the application logic.
This expands the error message that is printed if either input file has
an unsorted line. Both the program name (join) and the offending line
are printed out with the message to match the behaviour of the GNU
utility.
This commit replaces generic Results with UResults in some key
functions in numfmt. As a result of this, we can provide different
exit codes for different errors, which resolves ~70 failing test
cases in the GNU numfmt.pl test suite.
Fix two issues with the filename creation algorithm. First, this
corrects the behavior of the `-a` option. This commit ensures a
failure occurs when the number of chunks exceeds the number of
filenames representable with the specified fixed width:
$ printf "%0.sa" {1..11} | split -d -b 1 -a 1
split: output file suffixes exhausted
Second, this corrects the behavior of the default behavior when `-a`
is not specified on the command line. Previously, it was always
settings the filenames to have length 2 suffixes. This commit corrects
the behavior to follow the algorithm implied by GNU split, where the
filename lengths grow dynamically by two characters once the number of
chunks grows sufficiently large:
$ printf "%0.sa" {1..91} | ./target/debug/coreutils split -d -b 1 \
> && ls x* | tail
x81
x82
x83
x84
x85
x86
x87
x88
x89
x9000
