These are the first half of changes needed to pass the dd/bytes.sh tests:
- Add iseek and oseek options (additive with skip and seek options)
- Implement tests for the new flags, matching those from dd/bytes.sh
Implement distributing lines of a file in a round-robin manner to a
specified number of chunks. For example,
$ (seq 1 10 | split -n r/3) && head -v xa[abc]
==> xaa <==
1
4
7
10
==> xab <==
2
5
8
==> xac <==
3
6
9
Previously, given 'cp -P a b', where 'a' and 'b' were both symlinks, cp
would end up replacing the target of 'b'.
Signed-off-by: Ryan Gonzalez <ryan.gonzalez@collabora.com>
Fix a bug where `timeout --preserve-status` was not correctly
preserving the status code of the child process if it timed out. When
that happens, the status code of the child process is considered to be
the signal number (in this case, `SIGTERM`). The exit status of
`timeout` is then 128 plus the numeric code associated with `SIGTERM`.
* Adds support for mount path prefix matching and input path
canonicalization
- Sorts mount paths in reverse lexicographical order
- Canonicalize all paths and clear invalid paths
- Checking of mount path prefix matches input path
Implement the `--line-bytes` option to `split`. In this mode, the
program tries to write as many lines of the input as possible to each
chunk of output without exceeding a specified byte limit. The new
`LineBytesChunkWriter` struct represents this functionality.
Implement the `--output` command-line argument, which allows
specifying an exact sequence of columns to display in the output
table. For example,
$ df --output=source,fstype | head -n3
Filesystem Type
udev devtmpfs
tmpfs tmpfs
(The spacing does not exactly match the spacing of GNU `df` yet.)
Fixes#3057.
Correct the column header printed by `df` when the `--block-size`
argument has a value that is a multiple of 1024. After this commit,
the header looks like "1K" or "4M" or "117G", etc., depending on the
particular value of the block size. For example:
$ df --block-size=1024 | head -n1
Filesystem 1K-blocks Used Available Use% Mounted on
$ df --block-size=2048 | head -n1
Filesystem 2K-blocks Used Available Use% Mounted on
$ df --block-size=3072 | head -n1
Filesystem 3K-blocks Used Available Use% Mounted on
$ df --block-size=4096 | head -n1
Filesystem 4K-blocks Used Available Use% Mounted on
Add support for the `--total` option to `df`, which displays the total
of each numeric column. For example,
$ df --total
Filesystem 1K-blocks Used Available Use% Mounted on
udev 3858016 0 3858016 0% /dev
...
/dev/loop14 63488 63488 0 100% /snap/core20/1361
total 258775268 98099712 148220200 40% -
Implement `-n l/k/N` option, where the `k`th chunk of the input file
is written to stdout. For example,
$ seq -w 0 99 > f; split -n l/3/10 f
20
21
22
23
24
25
26
27
28
29
Add support for `split -n l/NUM`. Previously, `split` only supported
`-n NUM`, which splits a file into `NUM` chunks by byte. The `-n
l/NUM` strategy splits a file into `NUM` chunks without splitting
lines across chunks.
https://github.com/uutils/coreutils/pull/3084 (2a333ab391) had some
missing coverage and was merged before I had a chance to fix it.
This PR adds some coverage / improved error messages that were missing
from that previous PR.
If `conv=block,sync` command-line arguments are given and there is at
least one partial record read from the input (for example, if the
length of the input is not divisible by the value of the `ibs`
argument), then output an extra block of `cbs` spaces.
For example, no extra spaces are printed in this example because the
input is of length 10, a multiple of `ibs`:
$ printf "012\nabcde\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde$
2+0 records in
0+1 records out
But in this example, 5 extra spaces are printed because the length of
the input is not a multiple of `ibs`:
$ printf "012\nabcdefg\n" \
> | dd ibs=5 cbs=5 conv=block,sync status=noxfer \
> && echo $
012 abcde $
2+1 records in
0+1 records out
1 truncated record
The number of spaces printed is the size of the conversion block,
given by `cbs`.
Prevent `dd` from terminating with an error when given the
command-line argument `of=/dev/null`. This commit allows the call to
`File::set_len()` to result in an error without causing the process to
terminate prematurely.
Place the "truncated records" line below the "records out" line in the
status report produced by `dd` and properly handle the singularization
of the word "record" in the case of 1 truncated record. This matches
the behavior of GNU `dd`.
For example
$ printf "ab" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
1 truncated record
$ printf "ab\ncd\n" | dd cbs=1 conv=block status=noxfer > /dev/null
0+1 records in
0+1 records out
2 truncated records
Add the `-e` flag, which indicates whether to elide (that is, remove)
empty files that would have been created by the `-n` option.
The `-n` command-line argument gives a specific number of chunks into
which the input files will be split. If the number of chunks is
greater than the number of bytes, then empty files will be created for
the excess chunks. But if `-e` is given, then empty files will not be
created.
For example, contrast
$ printf 'a\n' > f && split -e -n 3 f && cat xaa xab xac
a
cat: xac: No such file or directory
with
$ printf 'a\n' > f && split -n 3 f && cat xaa xab xac
a
Clean up unit tests in the `dd` crate to make them easier to
manage. This commit does a few things.
* move test cases that test the complete functionality of the `dd`
program from the `dd_unit_tests` module up to the
`tests/by-util/test_dd.rs` module so that they can take advantage of
the testing framework and common testing tools provided by uutils,
* move test cases that test internal functions of the `dd`
implementation into the `tests` module within `dd.rs` so that they
live closer to the code they are testing,
* replace test cases defined by macros with test cases defined by
plain old functions to make the test cases easier to read at a
glance.
* include io-blksize parameter
* format changes for including io-blksize
Co-authored-by: DevSabb <devsabb@local>
Co-authored-by: Sylvestre Ledru <sylvestre@debian.org>
Add support for the `-x` command-line option to `split`. This option
causes `split` to produce filenames with hexadecimal suffixes instead
of the default alphabetic suffixes.
Correct the accounting for partial records written by `dd` to the
output file. After this commit, if fewer than `obs` bytes are written,
then that is counted as a partial record. For example,
$ printf 'abc' | dd bs=2 status=noxfer > /dev/null
1+1 records in
1+1 records out
That is, one complete record and one partial record are read from the
input, one complete record and one partial record are written to the
output. Previously, `dd` reported two complete records and zero
partial records written to the output in this case.
Change the `filter_mount_list()` function so that it always produces
the same order of `MountInfo` objects. This change ultimately results
in `df` printing its table of filesystems in the same order on each
execution. Previously, the table was in an arbitrary order because the
`MountInfo` objects were read from a `HashMap`.
Fixes#3086.
* ls: add new optional arguments to --classify flag
The --classify flag in ls now takes an option when argument
that may have the values always, auto and none.
Modified clap argument to allow an optional parameter and
changed the classify flag value parsing logic to account for
this change.
* ls: add test for indicator-style, ind and classify with value none
* ls: require option paramter to --classify to use a = to specify flag value
* ls: account for all the undocumented possible values for the --classify flag
Added the other values for the --classify flag along with modifications to tests.
Also documented the inconsistency between GNU coreutils because we accept the
flag value even for the short version of the flag.
Replace `ByteSplitter` and `LineSplitter` with `ByteChunkWriter` and
`LineChunkWriter` respectively. This results in a more maintainable
design and an increase in the speed of splitting by lines.
