# Objective
Fixes#12966
## Solution
Renaming multi_threaded feature to match snake case
## Migration Guide
Bevy feature multi-threaded should be refered to multi_threaded from now
on.
# Objective
Follow up to #13062. As of async-executor 1.11, the crate reexports
FallibleTask, which is the only reason bevy_tasks has a direct
dependency on async-task. This should avoid the two dependencies getting
out of sync in the future and causing spurious compilation failures.
## Solution
Bump async-executor to 1.11, use the reexport, remove the dependency on
async-task.
# Objective
- Fixes#13024.
## Solution
- Run `cargo clippy --target wasm32-unknown-unknown` until there are no
more errors.
- I recommend reviewing one commit at a time :)
---
## Changelog
- Fixed Clippy lints for `wasm32-unknown-unknown` target.
- Updated `bevy_transform`'s `README.md`.
# Objective
- Fixes#12905.
## Solution
- Use proper code `` tags for `TaskPoolBuilder::thread_name`.
- Remove leftover documentation in `TaskPool` referencing the deleted
`TaskPoolInner` struct.
- It may be possible to rephrase this, but I do not know enough about
the task pool to write something. (cc @james7132 who made the change
removing `TaskPoolInner`.)
- Ignore a buggy rustdoc lint that thinks `App` is already in scope for
`UpdateMode` doc. (Extracted from #12692.)
# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
I found that some .rs files are unnecessarily executable.
Rust source files may start with a shebang-like statement `#!`, so let's
make sure they are not executable just in case.
Here is the result of the `find` commend that lists executable .rs files
as of main branch `86bd648`.
```console
$ find -name \*.rs -type f -executable
./crates/bevy_gizmos/src/lib.rs
./crates/bevy_tasks/src/lib.rs
./crates/bevy_time/src/lib.rs
./crates/bevy_transform/src/lib.rs
./src/lib.rs
```
It appears that the permissions of those files were originally 644, but
were unexpectedly changed to 755 by commit
52e3f2007b.
## Solution
Make them not executable by using this command;
`find -name \*.rs -type f -executable -exec chmod --verbose a-x -- {}
\+`
# Objective
Currently the built docs only shows the logo and favicon for the top
level `bevy` crate. This makes views like
https://docs.rs/bevy_ecs/latest/bevy_ecs/ look potentially unrelated to
the project at first glance.
## Solution
Reproduce the docs attributes for every crate that Bevy publishes.
Ideally this would be done with some workspace level Cargo.toml control,
but AFAICT, such support does not exist.
# Objective
Fix missing `TextBundle` (and many others) which are present in the main
crate as default features but optional in the sub-crate. See:
- https://docs.rs/bevy/0.13.0/bevy/ui/node_bundles/index.html
- https://docs.rs/bevy_ui/0.13.0/bevy_ui/node_bundles/index.html
~~There are probably other instances in other crates that I could track
down, but maybe "all-features = true" should be used by default in all
sub-crates? Not sure.~~ (There were many.) I only noticed this because
rust-analyzer's "open docs" features takes me to the sub-crate, not the
main one.
## Solution
Add "all-features = true" to docs.rs metadata for crates that use
features.
## Changelog
### Changed
- Unified features documented on docs.rs between main crate and
sub-crates
# Objective
`bevy_tasks` provides utilities for parallel mapping over slices. It can
be useful to have a chunk index available in the iteration function to
know which part of the original slice is being processed.
## Solution
Adds an index argument to the parallel map functions in `bevy_tasks`.
---
## Changelog
### Changed
- `par_chunk_map`, `par_splat_map`, `par_chunk_map_mut`, and
`par_splat_map_mut` now provide a chunk index during iteration.
## Migration Guide
Functions passed as arguments to `par_chunk_map`, `par_splat_map`,
`par_chunk_map_mut`, and `par_splat_map_mut` must now take an additional
index argument.
# Objective
`Scope::spawn`, `Scope::spawn_on_external`, and `Scope::spawn_on_scope`
have different signatures depending on whether the `multi-threaded`
feature is enabled. The single-threaded version has a stricter signature
that prevents sending the `Scope` itself to spawned tasks.
## Solution
Changed the lifetime constraints in the single-threaded signatures from
`'env` to `'scope` to match the multi-threaded version.
This was split off from #11906.
# Objective
- The current implementations for `&Visibility == Visibility` and
`Visibility == &Visibility` are ambiguous, so they raise a warning for
being unconditionally recursive.
- `TaskPool`'s `LOCAL_EXECUTOR` thread local calls a `const` constructor
in a non-`const` context.
## Solution
- Make `&Visibility == Visibility` and `Visibility == &Visibility`
implementations use `Visibility == Visibility`.
- Wrap `LocalExecutor::new` in a special `const` block supported by
[`thread_local`](https://doc.rust-lang.org/stable/std/macro.thread_local.html).
---
This lints were found by running:
```shell
$ cargo clippy --workspace
```
There are a few other warnings that were more complicated, so I chose
not to include them in this PR.
<details>
<summary>Here they are...</summary>
```shell
warning: function cannot return without recursing
--> crates/bevy_utils/src/cow_arc.rs:92:5
|
92 | / fn eq(&self, other: &Self) -> bool {
93 | | self.deref().eq(other.deref())
94 | | }
| |_____^
|
note: recursive call site
--> crates/bevy_utils/src/cow_arc.rs:93:9
|
93 | self.deref().eq(other.deref())
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
warning: method `get_path` is never used
--> crates/bevy_reflect/src/serde/de.rs:26:8
|
25 | trait StructLikeInfo {
| -------------- method in this trait
26 | fn get_path(&self) -> &str;
| ^^^^^^^^
|
= note: `#[warn(dead_code)]` on by default
warning: methods `get_path` and `get_field` are never used
--> crates/bevy_reflect/src/serde/de.rs:34:8
|
33 | trait TupleLikeInfo {
| ------------- methods in this trait
34 | fn get_path(&self) -> &str;
| ^^^^^^^^
35 | fn get_field(&self, index: usize) -> Option<&UnnamedField>;
| ^^^^^^^^^
```
The other warnings are fixed by #11865.
</details>
# Objective
-
[`crossbeam::scope`](https://docs.rs/crossbeam/latest/crossbeam/fn.scope.html)
is soft-deprecated in favor of the standard library's implementation.
## Solution
- Replace reference in `TaskPool`'s docs to mention `std:🧵:scope`
instead.
# Objective
At the start of every schedule run, there's currently a guaranteed piece
of overhead as the async executor spawns the MultithreadeExecutor task
onto one of the ComputeTaskPool threads.
## Solution
Poll the executor once to immediately schedule systems without waiting
for the async executor, then spawn the task if and only if the executor
does not immediately terminate.
On a similar note, having the executor task immediately start executing
a system in the same async task might yield similar results over a
broader set of cases. However, this might be more involved, and may need
a solution like #8304.
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
#8219 changed the target type of a `transmute` without changing the one
transmuting from ([see the relevant
diff](55e9ab7c92 (diff-11413fb2eeba97978379d325353d32aa76eefd0af0c8e9b50b7f394ddfda7a26R351-R355))),
making them incompatible. This PR fixes this by changing the initial
type to match the target one (modulo lifetimes).
## Solution
Change the type to be transmuted from to match the one transmuting into
(modulo lifetimes)
# Objective
There are a lot of doctests that are `ignore`d for no documented reason.
And that should be fixed.
## Solution
I searched the bevy repo with the regex ` ```[a-z,]*ignore ` in order to
find all `ignore`d doctests. For each one of the `ignore`d doctests, I
did the following steps:
1. Attempt to remove the `ignored` attribute while still passing the
test. I did this by adding hidden dummy structs and imports.
2. If step 1 doesn't work, attempt to replace the `ignored` attribute
with the `no_run` attribute while still passing the test.
3. If step 2 doesn't work, keep the `ignored` attribute but add
documentation for why the `ignored` attribute was added.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
# Objective
Enables warning on `clippy::undocumented_unsafe_blocks` across the
workspace rather than only in `bevy_ecs`, `bevy_transform` and
`bevy_utils`. This adds a little awkwardness in a few areas of code that
have trivial safety or explain safety for multiple unsafe blocks with
one comment however automatically prevents these comments from being
missed.
## Solution
This adds `undocumented_unsafe_blocks = "warn"` to the workspace
`Cargo.toml` and fixes / adds a few missed safety comments. I also added
`#[allow(clippy::undocumented_unsafe_blocks)]` where the safety is
explained somewhere above.
There are a couple of safety comments I added I'm not 100% sure about in
`bevy_animation` and `bevy_render/src/view` and I'm not sure about the
use of `#[allow(clippy::undocumented_unsafe_blocks)]` compared to adding
comments like `// SAFETY: See above`.
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
- When compiling bevy for both singlethreaded and multithreaded contexts
and using `Task` directly, you can run into errors where you expect a
`Task` to be returned but `FakeTask` is instead. Due to `FakeTask` being
private the only solution is to ignore the return at all however because
it *is* returned that isn't totally clear. The error is confusing and
doesn't provide a solution or help figuring it out.
## Solution
- Made `FakeTask` public and added brief documentation providing a use
(none) that helps guide usage (no usage) of FakeTask.
# Objective
Reduce code duplication and improve APIs of Bevy's [global
taskpools](https://github.com/bevyengine/bevy/blob/main/crates/bevy_tasks/src/usages.rs).
## Solution
- As all three of the global taskpools have identical implementations
and only differ in their identifiers, this PR moves the implementation
into a macro to reduce code duplication.
- The `init` method is renamed to `get_or_init` to more accurately
reflect what it really does.
- Add a new `try_get` method that just returns `None` when the pool is
uninitialized, to complement the other getter methods.
- Minor documentation improvements to accompany the above changes.
---
## Changelog
- Added a new `try_get` method to the global TaskPools
- The global TaskPools' `init` method has been renamed to `get_or_init`
for clarity
- Documentation improvements
## Migration Guide
- Uses of `ComputeTaskPool::init`, `AsyncComputeTaskPool::init` and
`IoTaskPool::init` should be changed to `::get_or_init`.
This adds support for **Multiple Asset Sources**. You can now register a
named `AssetSource`, which you can load assets from like you normally
would:
```rust
let shader: Handle<Shader> = asset_server.load("custom_source://path/to/shader.wgsl");
```
Notice that `AssetPath` now supports `some_source://` syntax. This can
now be accessed through the `asset_path.source()` accessor.
Asset source names _are not required_. If one is not specified, the
default asset source will be used:
```rust
let shader: Handle<Shader> = asset_server.load("path/to/shader.wgsl");
```
The behavior of the default asset source has not changed. Ex: the
`assets` folder is still the default.
As referenced in #9714
## Why?
**Multiple Asset Sources** enables a number of often-asked-for
scenarios:
* **Loading some assets from other locations on disk**: you could create
a `config` asset source that reads from the OS-default config folder
(not implemented in this PR)
* **Loading some assets from a remote server**: you could register a new
`remote` asset source that reads some assets from a remote http server
(not implemented in this PR)
* **Improved "Binary Embedded" Assets**: we can use this system for
"embedded-in-binary assets", which allows us to replace the old
`load_internal_asset!` approach, which couldn't support asset
processing, didn't support hot-reloading _well_, and didn't make
embedded assets accessible to the `AssetServer` (implemented in this pr)
## Adding New Asset Sources
An `AssetSource` is "just" a collection of `AssetReader`, `AssetWriter`,
and `AssetWatcher` entries. You can configure new asset sources like
this:
```rust
app.register_asset_source(
"other",
AssetSource::build()
.with_reader(|| Box::new(FileAssetReader::new("other")))
)
)
```
Note that `AssetSource` construction _must_ be repeatable, which is why
a closure is accepted.
`AssetSourceBuilder` supports `with_reader`, `with_writer`,
`with_watcher`, `with_processed_reader`, `with_processed_writer`, and
`with_processed_watcher`.
Note that the "asset source" system replaces the old "asset providers"
system.
## Processing Multiple Sources
The `AssetProcessor` now supports multiple asset sources! Processed
assets can refer to assets in other sources and everything "just works".
Each `AssetSource` defines an unprocessed and processed `AssetReader` /
`AssetWriter`.
Currently this is all or nothing for a given `AssetSource`. A given
source is either processed or it is not. Later we might want to add
support for "lazy asset processing", where an `AssetSource` (such as a
remote server) can be configured to only process assets that are
directly referenced by local assets (in order to save local disk space
and avoid doing extra work).
## A new `AssetSource`: `embedded`
One of the big features motivating **Multiple Asset Sources** was
improving our "embedded-in-binary" asset loading. To prove out the
**Multiple Asset Sources** implementation, I chose to build a new
`embedded` `AssetSource`, which replaces the old `load_interal_asset!`
system.
The old `load_internal_asset!` approach had a number of issues:
* The `AssetServer` was not aware of (or capable of loading) internal
assets.
* Because internal assets weren't visible to the `AssetServer`, they
could not be processed (or used by assets that are processed). This
would prevent things "preprocessing shaders that depend on built in Bevy
shaders", which is something we desperately need to start doing.
* Each "internal asset" needed a UUID to be defined in-code to reference
it. This was very manual and toilsome.
The new `embedded` `AssetSource` enables the following pattern:
```rust
// Called in `crates/bevy_pbr/src/render/mesh.rs`
embedded_asset!(app, "mesh.wgsl");
// later in the app
let shader: Handle<Shader> = asset_server.load("embedded://bevy_pbr/render/mesh.wgsl");
```
Notice that this always treats the crate name as the "root path", and it
trims out the `src` path for brevity. This is generally predictable, but
if you need to debug you can use the new `embedded_path!` macro to get a
`PathBuf` that matches the one used by `embedded_asset`.
You can also reference embedded assets in arbitrary assets, such as WGSL
shaders:
```rust
#import "embedded://bevy_pbr/render/mesh.wgsl"
```
This also makes `embedded` assets go through the "normal" asset
lifecycle. They are only loaded when they are actually used!
We are also discussing implicitly converting asset paths to/from shader
modules, so in the future (not in this PR) you might be able to load it
like this:
```rust
#import bevy_pbr::render::mesh::Vertex
```
Compare that to the old system!
```rust
pub const MESH_SHADER_HANDLE: Handle<Shader> = Handle::weak_from_u128(3252377289100772450);
load_internal_asset!(app, MESH_SHADER_HANDLE, "mesh.wgsl", Shader::from_wgsl);
// The mesh asset is the _only_ accessible via MESH_SHADER_HANDLE and _cannot_ be loaded via the AssetServer.
```
## Hot Reloading `embedded`
You can enable `embedded` hot reloading by enabling the
`embedded_watcher` cargo feature:
```
cargo run --features=embedded_watcher
```
## Improved Hot Reloading Workflow
First: the `filesystem_watcher` cargo feature has been renamed to
`file_watcher` for brevity (and to match the `FileAssetReader` naming
convention).
More importantly, hot asset reloading is no longer configured in-code by
default. If you enable any asset watcher feature (such as `file_watcher`
or `rust_source_watcher`), asset watching will be automatically enabled.
This removes the need to _also_ enable hot reloading in your app code.
That means you can replace this:
```rust
app.add_plugins(DefaultPlugins.set(AssetPlugin::default().watch_for_changes()))
```
with this:
```rust
app.add_plugins(DefaultPlugins)
```
If you want to hot reload assets in your app during development, just
run your app like this:
```
cargo run --features=file_watcher
```
This means you can use the same code for development and deployment! To
deploy an app, just don't include the watcher feature
```
cargo build --release
```
My intent is to move to this approach for pretty much all dev workflows.
In a future PR I would like to replace `AssetMode::ProcessedDev` with a
`runtime-processor` cargo feature. We could then group all common "dev"
cargo features under a single `dev` feature:
```sh
# this would enable file_watcher, embedded_watcher, runtime-processor, and more
cargo run --features=dev
```
## AssetMode
`AssetPlugin::Unprocessed`, `AssetPlugin::Processed`, and
`AssetPlugin::ProcessedDev` have been replaced with an `AssetMode` field
on `AssetPlugin`.
```rust
// before
app.add_plugins(DefaultPlugins.set(AssetPlugin::Processed { /* fields here */ })
// after
app.add_plugins(DefaultPlugins.set(AssetPlugin { mode: AssetMode::Processed, ..default() })
```
This aligns `AssetPlugin` with our other struct-like plugins. The old
"source" and "destination" `AssetProvider` fields in the enum variants
have been replaced by the "asset source" system. You no longer need to
configure the AssetPlugin to "point" to custom asset providers.
## AssetServerMode
To improve the implementation of **Multiple Asset Sources**,
`AssetServer` was made aware of whether or not it is using "processed"
or "unprocessed" assets. You can check that like this:
```rust
if asset_server.mode() == AssetServerMode::Processed {
/* do something */
}
```
Note that this refactor should also prepare the way for building "one to
many processed output files", as it makes the server aware of whether it
is loading from processed or unprocessed sources. Meaning we can store
and read processed and unprocessed assets differently!
## AssetPath can now refer to folders
The "file only" restriction has been removed from `AssetPath`. The
`AssetServer::load_folder` API now accepts an `AssetPath` instead of a
`Path`, meaning you can load folders from other asset sources!
## Improved AssetPath Parsing
AssetPath parsing was reworked to support sources, improve error
messages, and to enable parsing with a single pass over the string.
`AssetPath::new` was replaced by `AssetPath::parse` and
`AssetPath::try_parse`.
## AssetWatcher broken out from AssetReader
`AssetReader` is no longer responsible for constructing `AssetWatcher`.
This has been moved to `AssetSourceBuilder`.
## Duplicate Event Debouncing
Asset V2 already debounced duplicate filesystem events, but this was
_input_ events. Multiple input event types can produce the same _output_
`AssetSourceEvent`. Now that we have `embedded_watcher`, which does
expensive file io on events, it made sense to debounce output events
too, so I added that! This will also benefit the AssetProcessor by
preventing integrity checks for duplicate events (and helps keep the
noise down in trace logs).
## Next Steps
* **Port Built-in Shaders**: Currently the primary (and essentially
only) user of `load_interal_asset` in Bevy's source code is "built-in
shaders". I chose not to do that in this PR for a few reasons:
1. We need to add the ability to pass shader defs in to shaders via meta
files. Some shaders (such as MESH_VIEW_TYPES) need to pass shader def
values in that are defined in code.
2. We need to revisit the current shader module naming system. I think
we _probably_ want to imply modules from source structure (at least by
default). Ideally in a way that can losslessly convert asset paths
to/from shader modules (to enable the asset system to resolve modules
using the asset server).
3. I want to keep this change set minimal / get this merged first.
* **Deprecate `load_internal_asset`**: we can't do that until we do (1)
and (2)
* **Relative Asset Paths**: This PR significantly increases the need for
relative asset paths (which was already pretty high). Currently when
loading dependencies, it is assumed to be an absolute path, which means
if in an `AssetLoader` you call `context.load("some/path/image.png")` it
will assume that is the "default" asset source, _even if the current
asset is in a different asset source_. This will cause breakage for
AssetLoaders that are not designed to add the current source to whatever
paths are being used. AssetLoaders should generally not need to be aware
of the name of their current asset source, or need to think about the
"current asset source" generally. We should build apis that support
relative asset paths and then encourage using relative paths as much as
possible (both via api design and docs). Relative paths are also
important because they will allow developers to move folders around
(even across providers) without reprocessing, provided there is no path
breakage.
# Objective
- When I've tested alternative async executors with bevy a common
problem is that they deadlock when we try to run nested scopes. i.e.
running a multithreaded schedule from inside another multithreaded
schedule. This adds a test to bevy_tasks for that so the issue can be
spotted earlier while developing.
## Changelog
- add a test for nested scopes.
# Objective
Fixes#9625
## Solution
Adds `async-io` as an optional dependency of `bevy_tasks`. When enabled,
this causes calls to `futures_lite::future::block_on` to be replaced
with calls to `async_io::block_on`.
---
## Changelog
- Added a new `async-io` feature to `bevy_tasks`. When enabled, this
causes `bevy_tasks` to use `async-io`'s implemention of `block_on`
instead of `futures-lite`'s implementation. You should enable this if
you use `async-io` in your application.
# Objective
`single_threaded_task_pool` emitted a warning:
```
warning: use of `default` to create a unit struct
--> crates/bevy_tasks/src/single_threaded_task_pool.rs:22:25
|
22 | Self(PhantomData::default())
| ^^^^^^^^^^^ help: remove this call to `default`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#default_constructed_unit_structs
= note: `#[warn(clippy::default_constructed_unit_structs)]` on by default
```
## Solution
fix the lint
# Objective
I found it very difficult to understand how bevy tasks work, and I
concluded that the documentation should be improved for beginners like
me.
## Solution
These changes to the documentation were written from my beginner's
perspective after
some extremely helpful explanations by nil on Discord.
I am not familiar enough with rustdoc yet; when looking at the source, I
found the documentation at the very top of `usages.rs` helpful, but I
don't know where they are rendered. They should probably be linked to
from the main `bevy_tasks` README.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
- `bevy_tasks` emits warnings under certain conditions
When I run `cargo clippy -p bevy_tasks` the warning doesn't show up,
while if I run it with `cargo clippy -p bevy_asset` the warning shows
up.
## Solution
- Fix the warnings.
## Longer term solution
We should probably fix CI so that those warnings do not slip through.
But that's not the goal of this PR.
# Objective
Fixes#9113
## Solution
disable `multi-threaded` default feature
## Migration Guide
The `multi-threaded` feature in `bevy_ecs` and `bevy_tasks` is no longer
enabled by default. However, this remains a default feature for the
umbrella `bevy` crate. If you depend on `bevy_ecs` or `bevy_tasks`
directly, you should consider enabling this to allow systems to run in
parallel.
# Objective
Fixes#6689.
## Solution
Add `single-threaded` as an optional non-default feature to `bevy_ecs`
and `bevy_tasks` that:
- disable the `ParallelExecutor` as a default runner
- disables the multi-threaded `TaskPool`
- internally replace `QueryParIter::for_each` calls with
`Query::for_each`.
Removed the `Mutex` and `Arc` usage in the single-threaded task pool.
## Future Work/TODO
Create type aliases for `Mutex`, `Arc` that change to single-threaaded
equivalents where possible.
---
## Changelog
Added: Optional default feature `multi-theaded` to that enables
multithreaded parallelism in the engine. Disabling it disables all
multithreading in exchange for higher single threaded performance. Does
nothing on WASM targets.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Links in the api docs are nice. I noticed that there were several places
where structs / functions and other things were referenced in the docs,
but weren't linked. I added the links where possible / logical.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes#8215 and #8152. When systems panic, it causes the main thread to
panic as well, which clutters the output.
## Solution
Resolves the panic in the multi-threaded scheduler. Also adds an extra
message that tells the user the system that panicked.
Using the example from the issue, here is what the messages now look
like:
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Update, panicking_system)
.run();
}
fn panicking_system() {
panic!("oooh scary");
}
```
### Before
```
Compiling bevy_test v0.1.0 (E:\Projects\Rust\bevy_test)
Finished dev [unoptimized + debuginfo] target(s) in 2m 58s
Running `target\debug\bevy_test.exe`
2023-03-30T22:19:09.234932Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Windows 10 Pro", kernel: "19044", cpu: "AMD Ryzen 5 2600 Six-Core Processor", core_count: "6", memory: "15.9 GiB" }
thread 'Compute Task Pool (5)' panicked at 'oooh scary', src\main.rs:11:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
thread 'Compute Task Pool (5)' panicked at 'A system has panicked so the executor cannot continue.: RecvError', E:\Projects\Rust\bevy\crates\bevy_ecs\src\schedule\executor\multi_threaded.rs:194:60
thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', E:\Projects\Rust\bevy\crates\bevy_tasks\src\task_pool.rs:376:49
error: process didn't exit successfully: `target\debug\bevy_test.exe` (exit code: 101)
```
### After
```
Compiling bevy_test v0.1.0 (E:\Projects\Rust\bevy_test)
Finished dev [unoptimized + debuginfo] target(s) in 2.39s
Running `target\debug\bevy_test.exe`
2023-03-30T22:11:24.748513Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Windows 10 Pro", kernel: "19044", cpu: "AMD Ryzen 5 2600 Six-Core Processor", core_count: "6", memory: "15.9 GiB" }
thread 'Compute Task Pool (5)' panicked at 'oooh scary', src\main.rs:11:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Encountered a panic in system `bevy_test::panicking_system`!
Encountered a panic in system `bevy_app::main_schedule::Main::run_main`!
error: process didn't exit successfully: `target\debug\bevy_test.exe` (exit code: 101)
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Fixes issue mentioned in PR #8285.
_Note: By mistake, this is currently dependent on #8285_
# Objective
Ensure consistency in the spelling of the documentation.
Exceptions:
`crates/bevy_mikktspace/src/generated.rs` - Has not been changed from
licence to license as it is part of a licensing agreement.
Maybe for further consistency,
https://github.com/bevyengine/bevy-website should also be given a look.
## Solution
### Changed the spelling of the current words (UK/CN/AU -> US) :
cancelled -> canceled (Breaking API changes in #8285)
behaviour -> behavior (Breaking API changes in #8285)
neighbour -> neighbor
grey -> gray
recognise -> recognize
centre -> center
metres -> meters
colour -> color
### ~~Update [`engine_style_guide.md`]~~ Moved to #8324
---
## Changelog
Changed UK spellings in documentation to US
## Migration Guide
Non-breaking changes*
\* If merged after #8285
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
…or's ticker for one thread.
# Objective
- Fix debug_asset_server hang.
## Solution
- Reuse the thread_local executor for MainThreadExecutor resource, so there will be only one ThreadExecutor for main thread.
- If ThreadTickers from same executor, they are conflict with each other. Then only tick one.
# Objective
- While working on scope recently, I ran into a missing invariant for the transmutes in scope. The references passed into Scope are active for the rest of the scope function, but rust doesn't know this so it allows using the owned `spawned` and `scope` after `f` returns.
## Solution
- Update the safety comment
- Shadow the owned values so they can't be used.
Huge thanks to @maniwani, @devil-ira, @hymm, @cart, @superdump and @jakobhellermann for the help with this PR.
# Objective
- Followup #6587.
- Minimal integration for the Stageless Scheduling RFC: https://github.com/bevyengine/rfcs/pull/45
## Solution
- [x] Remove old scheduling module
- [x] Migrate new methods to no longer use extension methods
- [x] Fix compiler errors
- [x] Fix benchmarks
- [x] Fix examples
- [x] Fix docs
- [x] Fix tests
## Changelog
### Added
- a large number of methods on `App` to work with schedules ergonomically
- the `CoreSchedule` enum
- `App::add_extract_system` via the `RenderingAppExtension` trait extension method
- the private `prepare_view_uniforms` system now has a public system set for scheduling purposes, called `ViewSet::PrepareUniforms`
### Removed
- stages, and all code that mentions stages
- states have been dramatically simplified, and no longer use a stack
- `RunCriteriaLabel`
- `AsSystemLabel` trait
- `on_hierarchy_reports_enabled` run criteria (now just uses an ad hoc resource checking run condition)
- systems in `RenderSet/Stage::Extract` no longer warn when they do not read data from the main world
- `RunCriteriaLabel`
- `transform_propagate_system_set`: this was a nonstandard pattern that didn't actually provide enough control. The systems are already `pub`: the docs have been updated to ensure that the third-party usage is clear.
### Changed
- `System::default_labels` is now `System::default_system_sets`.
- `App::add_default_labels` is now `App::add_default_sets`
- `CoreStage` and `StartupStage` enums are now `CoreSet` and `StartupSet`
- `App::add_system_set` was renamed to `App::add_systems`
- The `StartupSchedule` label is now defined as part of the `CoreSchedules` enum
- `.label(SystemLabel)` is now referred to as `.in_set(SystemSet)`
- `SystemLabel` trait was replaced by `SystemSet`
- `SystemTypeIdLabel<T>` was replaced by `SystemSetType<T>`
- The `ReportHierarchyIssue` resource now has a public constructor (`new`), and implements `PartialEq`
- Fixed time steps now use a schedule (`CoreSchedule::FixedTimeStep`) rather than a run criteria.
- Adding rendering extraction systems now panics rather than silently failing if no subapp with the `RenderApp` label is found.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied.
- `SceneSpawnerSystem` now runs under `CoreSet::Update`, rather than `CoreStage::PreUpdate.at_end()`.
- `bevy_pbr::add_clusters` is no longer an exclusive system
- the top level `bevy_ecs::schedule` module was replaced with `bevy_ecs::scheduling`
- `tick_global_task_pools_on_main_thread` is no longer run as an exclusive system. Instead, it has been replaced by `tick_global_task_pools`, which uses a `NonSend` resource to force running on the main thread.
## Migration Guide
- Calls to `.label(MyLabel)` should be replaced with `.in_set(MySet)`
- Stages have been removed. Replace these with system sets, and then add command flushes using the `apply_system_buffers` exclusive system where needed.
- The `CoreStage`, `StartupStage, `RenderStage` and `AssetStage` enums have been replaced with `CoreSet`, `StartupSet, `RenderSet` and `AssetSet`. The same scheduling guarantees have been preserved.
- Systems are no longer added to `CoreSet::Update` by default. Add systems manually if this behavior is needed, although you should consider adding your game logic systems to `CoreSchedule::FixedTimestep` instead for more reliable framerate-independent behavior.
- Similarly, startup systems are no longer part of `StartupSet::Startup` by default. In most cases, this won't matter to you.
- For example, `add_system_to_stage(CoreStage::PostUpdate, my_system)` should be replaced with
- `add_system(my_system.in_set(CoreSet::PostUpdate)`
- When testing systems or otherwise running them in a headless fashion, simply construct and run a schedule using `Schedule::new()` and `World::run_schedule` rather than constructing stages
- Run criteria have been renamed to run conditions. These can now be combined with each other and with states.
- Looping run criteria and state stacks have been removed. Use an exclusive system that runs a schedule if you need this level of control over system control flow.
- For app-level control flow over which schedules get run when (such as for rollback networking), create your own schedule and insert it under the `CoreSchedule::Outer` label.
- Fixed timesteps are now evaluated in a schedule, rather than controlled via run criteria. The `run_fixed_timestep` system runs this schedule between `CoreSet::First` and `CoreSet::PreUpdate` by default.
- Command flush points introduced by `AssetStage` have been removed. If you were relying on these, add them back manually.
- Adding extract systems is now typically done directly on the main app. Make sure the `RenderingAppExtension` trait is in scope, then call `app.add_extract_system(my_system)`.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied. You may need to order your movement systems to occur before this system in order to avoid system order ambiguities in culling behavior.
- the `RenderLabel` `AppLabel` was renamed to `RenderApp` for clarity
- `App::add_state` now takes 0 arguments: the starting state is set based on the `Default` impl.
- Instead of creating `SystemSet` containers for systems that run in stages, simply use `.on_enter::<State::Variant>()` or its `on_exit` or `on_update` siblings.
- `SystemLabel` derives should be replaced with `SystemSet`. You will also need to add the `Debug`, `PartialEq`, `Eq`, and `Hash` traits to satisfy the new trait bounds.
- `with_run_criteria` has been renamed to `run_if`. Run criteria have been renamed to run conditions for clarity, and should now simply return a bool.
- States have been dramatically simplified: there is no longer a "state stack". To queue a transition to the next state, call `NextState::set`
## TODO
- [x] remove dead methods on App and World
- [x] add `App::add_system_to_schedule` and `App::add_systems_to_schedule`
- [x] avoid adding the default system set at inappropriate times
- [x] remove any accidental cycles in the default plugins schedule
- [x] migrate benchmarks
- [x] expose explicit labels for the built-in command flush points
- [x] migrate engine code
- [x] remove all mentions of stages from the docs
- [x] verify docs for States
- [x] fix uses of exclusive systems that use .end / .at_start / .before_commands
- [x] migrate RenderStage and AssetStage
- [x] migrate examples
- [x] ensure that transform propagation is exported in a sufficiently public way (the systems are already pub)
- [x] ensure that on_enter schedules are run at least once before the main app
- [x] re-enable opt-in to execution order ambiguities
- [x] revert change to `update_bounds` to ensure it runs in `PostUpdate`
- [x] test all examples
- [x] unbreak directional lights
- [x] unbreak shadows (see 3d_scene, 3d_shape, lighting, transparaency_3d examples)
- [x] game menu example shows loading screen and menu simultaneously
- [x] display settings menu is a blank screen
- [x] `without_winit` example panics
- [x] ensure all tests pass
- [x] SubApp doc test fails
- [x] runs_spawn_local tasks fails
- [x] [Fix panic_when_hierachy_cycle test hanging](https://github.com/alice-i-cecile/bevy/pull/120)
## Points of Difficulty and Controversy
**Reviewers, please give feedback on these and look closely**
1. Default sets, from the RFC, have been removed. These added a tremendous amount of implicit complexity and result in hard to debug scheduling errors. They're going to be tackled in the form of "base sets" by @cart in a followup.
2. The outer schedule controls which schedule is run when `App::update` is called.
3. I implemented `Label for `Box<dyn Label>` for our label types. This enables us to store schedule labels in concrete form, and then later run them. I ran into the same set of problems when working with one-shot systems. We've previously investigated this pattern in depth, and it does not appear to lead to extra indirection with nested boxes.
4. `SubApp::update` simply runs the default schedule once. This sucks, but this whole API is incomplete and this was the minimal changeset.
5. `time_system` and `tick_global_task_pools_on_main_thread` no longer use exclusive systems to attempt to force scheduling order
6. Implemetnation strategy for fixed timesteps
7. `AssetStage` was migrated to `AssetSet` without reintroducing command flush points. These did not appear to be used, and it's nice to remove these bottlenecks.
8. Migration of `bevy_render/lib.rs` and pipelined rendering. The logic here is unusually tricky, as we have complex scheduling requirements.
## Future Work (ideally before 0.10)
- Rename schedule_v3 module to schedule or scheduling
- Add a derive macro to states, and likely a `EnumIter` trait of some form
- Figure out what exactly to do with the "systems added should basically work by default" problem
- Improve ergonomics for working with fixed timesteps and states
- Polish FixedTime API to match Time
- Rebase and merge #7415
- Resolve all internal ambiguities (blocked on better tools, especially #7442)
- Add "base sets" to replace the removed default sets.
# Objective
- Currently exclusive systems and applying buffers run outside of the multithreaded executor and just calls the funtions on the thread the schedule is running on. Stageless changes this to run these using tasks in a scope. Specifically It uses `spawn_on_scope` to run these. For the render thread this is incorrect as calling `spawn_on_scope` there runs tasks on the main thread. It should instead run these on the render thread and only run nonsend systems on the main thread.
## Solution
- Add another executor to `Scope` for spawning tasks on the scope. `spawn_on_scope` now always runs the task on the thread the scope is running on. `spawn_on_external` spawns onto the external executor than is optionally passed in. If None is passed `spawn_on_external` will spawn onto the scope executor.
- Eventually this new machinery will be able to be removed. This will happen once a fix for removing NonSend resources from the world lands. So this is a temporary fix to support stageless.
---
## Changelog
- add a spawn_on_external method to allow spawning on the scope's thread or an external thread
## Migration Guide
> No migration guide. The main thread executor was introduced in pipelined rendering which was merged for 0.10. spawn_on_scope now behaves the same way as on 0.9.
# Objective
I found several words in code and docs are incorrect. This should be fixed.
## Solution
- Fix several minor typos
Co-authored-by: Chris Ohk <utilforever@gmail.com>
# Objective
- Implement pipelined rendering
- Fixes#5082
- Fixes#4718
## User Facing Description
Bevy now implements piplelined rendering! Pipelined rendering allows the app logic and rendering logic to run on different threads leading to large gains in performance.
*tracy capture of many_foxes example*
To use pipelined rendering, you just need to add the `PipelinedRenderingPlugin`. If you're using `DefaultPlugins` then it will automatically be added for you on all platforms except wasm. Bevy does not currently support multithreading on wasm which is needed for this feature to work. If you aren't using `DefaultPlugins` you can add the plugin manually.
```rust
use bevy::prelude::*;
use bevy::render::pipelined_rendering::PipelinedRenderingPlugin;
fn main() {
App::new()
// whatever other plugins you need
.add_plugin(RenderPlugin)
// needs to be added after RenderPlugin
.add_plugin(PipelinedRenderingPlugin)
.run();
}
```
If for some reason pipelined rendering needs to be removed. You can also disable the plugin the normal way.
```rust
use bevy::prelude::*;
use bevy::render::pipelined_rendering::PipelinedRenderingPlugin;
fn main() {
App::new.add_plugins(DefaultPlugins.build().disable::<PipelinedRenderingPlugin>());
}
```
### A setup function was added to plugins
A optional plugin lifecycle function was added to the `Plugin trait`. This function is called after all plugins have been built, but before the app runner is called. This allows for some final setup to be done. In the case of pipelined rendering, the function removes the sub app from the main app and sends it to the render thread.
```rust
struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
}
// optional function
fn setup(&self, app: &mut App) {
// do some final setup before runner is called
}
}
```
### A Stage for Frame Pacing
In the `RenderExtractApp` there is a stage labelled `BeforeIoAfterRenderStart` that systems can be added to. The specific use case for this stage is for a frame pacing system that can delay the start of main app processing in render bound apps to reduce input latency i.e. "frame pacing". This is not currently built into bevy, but exists as `bevy`
```text
|-------------------------------------------------------------------|
| | BeforeIoAfterRenderStart | winit events | main schedule |
| extract |---------------------------------------------------------|
| | extract commands | rendering schedule |
|-------------------------------------------------------------------|
```
### Small API additions
* `Schedule::remove_stage`
* `App::insert_sub_app`
* `App::remove_sub_app`
* `TaskPool::scope_with_executor`
## Problems and Solutions
### Moving render app to another thread
Most of the hard bits for this were done with the render redo. This PR just sends the render app back and forth through channels which seems to work ok. I originally experimented with using a scope to run the render task. It was cuter, but that approach didn't allow render to start before i/o processing. So I switched to using channels. There is much complexity in the coordination that needs to be done, but it's worth it. By moving rendering during i/o processing the frame times should be much more consistent in render bound apps. See https://github.com/bevyengine/bevy/issues/4691.
### Unsoundness with Sending World with NonSend resources
Dropping !Send things on threads other than the thread they were spawned on is considered unsound. The render world doesn't have any nonsend resources. So if we tell the users to "pretty please don't spawn nonsend resource on the render world", we can avoid this problem.
More seriously there is this https://github.com/bevyengine/bevy/pull/6534 pr, which patches the unsoundness by aborting the app if a nonsend resource is dropped on the wrong thread. ~~That PR should probably be merged before this one.~~ For a longer term solution we have this discussion going https://github.com/bevyengine/bevy/discussions/6552.
### NonSend Systems in render world
The render world doesn't have any !Send resources, but it does have a non send system. While Window is Send, winit does have some API's that can only be accessed on the main thread. `prepare_windows` in the render schedule thus needs to be scheduled on the main thread. Currently we run nonsend systems by running them on the thread the TaskPool::scope runs on. When we move render to another thread this no longer works.
To fix this, a new `scope_with_executor` method was added that takes a optional `TheadExecutor` that can only be ticked on the thread it was initialized on. The render world then holds a `MainThreadExecutor` resource which can be passed to the scope in the parallel executor that it uses to spawn it's non send systems on.
### Scopes executors between render and main should not share tasks
Since the render world and the app world share the `ComputeTaskPool`. Because `scope` has executors for the ComputeTaskPool a system from the main world could run on the render thread or a render system could run on the main thread. This can cause performance problems because it can delay a stage from finishing. See https://github.com/bevyengine/bevy/pull/6503#issuecomment-1309791442 for more details.
To avoid this problem, `TaskPool::scope` has been changed to not tick the ComputeTaskPool when it's used by the parallel executor. In the future when we move closer to the 1 thread to 1 logical core model we may want to overprovide threads, because the render and main app threads don't do much when executing the schedule.
## Performance
My machine is Windows 11, AMD Ryzen 5600x, RX 6600
### Examples
#### This PR with pipelining vs Main
> Note that these were run on an older version of main and the performance profile has probably changed due to optimizations
Seeing a perf gain from 29% on many lights to 7% on many sprites.
<html>
<body>
<!--StartFragment--><google-sheets-html-origin>
| percent | | | Diff | | | Main | | | PR | |
-- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | --
tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma
many foxes | 27.01% | 27.34% | -47.09% | 1.58 | 1.55 | -1.78 | 5.85 | 5.67 | 3.78 | 4.27 | 4.12 | 5.56
many lights | 29.35% | 29.94% | -10.84% | 3.02 | 3.03 | -0.57 | 10.29 | 10.12 | 5.26 | 7.27 | 7.09 | 5.83
many animated sprites | 13.97% | 15.69% | 14.20% | 3.79 | 4.17 | 1.41 | 27.12 | 26.57 | 9.93 | 23.33 | 22.4 | 8.52
3d scene | 25.79% | 26.78% | 7.46% | 0.49 | 0.49 | 0.15 | 1.9 | 1.83 | 2.01 | 1.41 | 1.34 | 1.86
many cubes | 11.97% | 11.28% | 14.51% | 1.93 | 1.78 | 1.31 | 16.13 | 15.78 | 9.03 | 14.2 | 14 | 7.72
many sprites | 7.14% | 9.42% | -85.42% | 1.72 | 2.23 | -6.15 | 24.09 | 23.68 | 7.2 | 22.37 | 21.45 | 13.35
<!--EndFragment-->
</body>
</html>
#### This PR with pipelining disabled vs Main
Mostly regressions here. I don't think this should be a problem as users that are disabling pipelined rendering are probably running single threaded and not using the parallel executor. The regression is probably mostly due to the switch to use `async_executor::run` instead of `try_tick` and also having one less thread to run systems on. I'll do a writeup on why switching to `run` causes regressions, so we can try to eventually fix it. Using try_tick causes issues when pipeline rendering is enable as seen [here](https://github.com/bevyengine/bevy/pull/6503#issuecomment-1380803518)
<html>
<body>
<!--StartFragment--><google-sheets-html-origin>
| percent | | | Diff | | | Main | | | PR no pipelining | |
-- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | --
tracy frame time | mean | median | sigma | mean | median | sigma | mean | median | sigma | mean | median | sigma
many foxes | -3.72% | -4.42% | -1.07% | -0.21 | -0.24 | -0.04 | 5.64 | 5.43 | 3.74 | 5.85 | 5.67 | 3.78
many lights | 0.29% | -0.30% | 4.75% | 0.03 | -0.03 | 0.25 | 10.29 | 10.12 | 5.26 | 10.26 | 10.15 | 5.01
many animated sprites | 0.22% | 1.81% | -2.72% | 0.06 | 0.48 | -0.27 | 27.12 | 26.57 | 9.93 | 27.06 | 26.09 | 10.2
3d scene | -15.79% | -14.75% | -31.34% | -0.3 | -0.27 | -0.63 | 1.9 | 1.83 | 2.01 | 2.2 | 2.1 | 2.64
many cubes | -2.85% | -3.30% | 0.00% | -0.46 | -0.52 | 0 | 16.13 | 15.78 | 9.03 | 16.59 | 16.3 | 9.03
many sprites | 2.49% | 2.41% | 0.69% | 0.6 | 0.57 | 0.05 | 24.09 | 23.68 | 7.2 | 23.49 | 23.11 | 7.15
<!--EndFragment-->
</body>
</html>
### Benchmarks
Mostly the same except empty_systems has got a touch slower. The maybe_pipelining+1 column has the compute task pool with an extra thread over default added. This is because pipelining loses one thread over main to execute systems on, since the main thread no longer runs normal systems.
<details>
<summary>Click Me</summary>
```text
group main maybe-pipelining+1
----- ------------------------- ------------------
busy_systems/01x_entities_03_systems 1.07 30.7±1.32µs ? ?/sec 1.00 28.6±1.35µs ? ?/sec
busy_systems/01x_entities_06_systems 1.10 52.1±1.10µs ? ?/sec 1.00 47.2±1.08µs ? ?/sec
busy_systems/01x_entities_09_systems 1.00 74.6±1.36µs ? ?/sec 1.00 75.0±1.93µs ? ?/sec
busy_systems/01x_entities_12_systems 1.03 100.6±6.68µs ? ?/sec 1.00 98.0±1.46µs ? ?/sec
busy_systems/01x_entities_15_systems 1.11 128.5±3.53µs ? ?/sec 1.00 115.5±1.02µs ? ?/sec
busy_systems/02x_entities_03_systems 1.16 50.4±2.56µs ? ?/sec 1.00 43.5±3.00µs ? ?/sec
busy_systems/02x_entities_06_systems 1.00 87.1±1.27µs ? ?/sec 1.05 91.5±7.15µs ? ?/sec
busy_systems/02x_entities_09_systems 1.04 139.9±6.37µs ? ?/sec 1.00 134.0±1.06µs ? ?/sec
busy_systems/02x_entities_12_systems 1.05 179.2±3.47µs ? ?/sec 1.00 170.1±3.17µs ? ?/sec
busy_systems/02x_entities_15_systems 1.01 219.6±3.75µs ? ?/sec 1.00 218.1±2.55µs ? ?/sec
busy_systems/03x_entities_03_systems 1.10 70.6±2.33µs ? ?/sec 1.00 64.3±0.69µs ? ?/sec
busy_systems/03x_entities_06_systems 1.02 130.2±3.11µs ? ?/sec 1.00 128.0±1.34µs ? ?/sec
busy_systems/03x_entities_09_systems 1.00 195.0±10.11µs ? ?/sec 1.00 194.8±1.41µs ? ?/sec
busy_systems/03x_entities_12_systems 1.01 261.7±4.05µs ? ?/sec 1.00 259.8±4.11µs ? ?/sec
busy_systems/03x_entities_15_systems 1.00 318.0±3.04µs ? ?/sec 1.06 338.3±20.25µs ? ?/sec
busy_systems/04x_entities_03_systems 1.00 82.9±0.63µs ? ?/sec 1.02 84.3±0.63µs ? ?/sec
busy_systems/04x_entities_06_systems 1.01 181.7±3.65µs ? ?/sec 1.00 179.8±1.76µs ? ?/sec
busy_systems/04x_entities_09_systems 1.04 265.0±4.68µs ? ?/sec 1.00 255.3±1.98µs ? ?/sec
busy_systems/04x_entities_12_systems 1.00 335.9±3.00µs ? ?/sec 1.05 352.6±15.84µs ? ?/sec
busy_systems/04x_entities_15_systems 1.00 418.6±10.26µs ? ?/sec 1.08 450.2±39.58µs ? ?/sec
busy_systems/05x_entities_03_systems 1.07 114.3±0.95µs ? ?/sec 1.00 106.9±1.52µs ? ?/sec
busy_systems/05x_entities_06_systems 1.08 229.8±2.90µs ? ?/sec 1.00 212.3±4.18µs ? ?/sec
busy_systems/05x_entities_09_systems 1.03 329.3±1.99µs ? ?/sec 1.00 319.2±2.43µs ? ?/sec
busy_systems/05x_entities_12_systems 1.06 454.7±6.77µs ? ?/sec 1.00 430.1±3.58µs ? ?/sec
busy_systems/05x_entities_15_systems 1.03 554.6±6.15µs ? ?/sec 1.00 538.4±23.87µs ? ?/sec
contrived/01x_entities_03_systems 1.00 14.0±0.15µs ? ?/sec 1.08 15.1±0.21µs ? ?/sec
contrived/01x_entities_06_systems 1.04 28.5±0.37µs ? ?/sec 1.00 27.4±0.44µs ? ?/sec
contrived/01x_entities_09_systems 1.00 41.5±4.38µs ? ?/sec 1.02 42.2±2.24µs ? ?/sec
contrived/01x_entities_12_systems 1.06 55.9±1.49µs ? ?/sec 1.00 52.6±1.36µs ? ?/sec
contrived/01x_entities_15_systems 1.02 68.0±2.00µs ? ?/sec 1.00 66.5±0.78µs ? ?/sec
contrived/02x_entities_03_systems 1.03 25.2±0.38µs ? ?/sec 1.00 24.6±0.52µs ? ?/sec
contrived/02x_entities_06_systems 1.00 46.3±0.49µs ? ?/sec 1.04 48.1±4.13µs ? ?/sec
contrived/02x_entities_09_systems 1.02 70.4±0.99µs ? ?/sec 1.00 68.8±1.04µs ? ?/sec
contrived/02x_entities_12_systems 1.06 96.8±1.49µs ? ?/sec 1.00 91.5±0.93µs ? ?/sec
contrived/02x_entities_15_systems 1.02 116.2±0.95µs ? ?/sec 1.00 114.2±1.42µs ? ?/sec
contrived/03x_entities_03_systems 1.00 33.2±0.38µs ? ?/sec 1.01 33.6±0.45µs ? ?/sec
contrived/03x_entities_06_systems 1.00 62.4±0.73µs ? ?/sec 1.01 63.3±1.05µs ? ?/sec
contrived/03x_entities_09_systems 1.02 96.4±0.85µs ? ?/sec 1.00 94.8±3.02µs ? ?/sec
contrived/03x_entities_12_systems 1.01 126.3±4.67µs ? ?/sec 1.00 125.6±2.27µs ? ?/sec
contrived/03x_entities_15_systems 1.03 160.2±9.37µs ? ?/sec 1.00 156.0±1.53µs ? ?/sec
contrived/04x_entities_03_systems 1.02 41.4±3.39µs ? ?/sec 1.00 40.5±0.52µs ? ?/sec
contrived/04x_entities_06_systems 1.00 78.9±1.61µs ? ?/sec 1.02 80.3±1.06µs ? ?/sec
contrived/04x_entities_09_systems 1.02 121.8±3.97µs ? ?/sec 1.00 119.2±1.46µs ? ?/sec
contrived/04x_entities_12_systems 1.00 157.8±1.48µs ? ?/sec 1.01 160.1±1.72µs ? ?/sec
contrived/04x_entities_15_systems 1.00 197.9±1.47µs ? ?/sec 1.08 214.2±34.61µs ? ?/sec
contrived/05x_entities_03_systems 1.00 49.1±0.33µs ? ?/sec 1.01 49.7±0.75µs ? ?/sec
contrived/05x_entities_06_systems 1.00 95.0±0.93µs ? ?/sec 1.00 94.6±0.94µs ? ?/sec
contrived/05x_entities_09_systems 1.01 143.2±1.68µs ? ?/sec 1.00 142.2±2.00µs ? ?/sec
contrived/05x_entities_12_systems 1.00 191.8±2.03µs ? ?/sec 1.01 192.7±7.88µs ? ?/sec
contrived/05x_entities_15_systems 1.02 239.7±3.71µs ? ?/sec 1.00 235.8±4.11µs ? ?/sec
empty_systems/000_systems 1.01 47.8±0.67ns ? ?/sec 1.00 47.5±2.02ns ? ?/sec
empty_systems/001_systems 1.00 1743.2±126.14ns ? ?/sec 1.01 1761.1±70.10ns ? ?/sec
empty_systems/002_systems 1.01 2.2±0.04µs ? ?/sec 1.00 2.2±0.02µs ? ?/sec
empty_systems/003_systems 1.02 2.7±0.09µs ? ?/sec 1.00 2.7±0.16µs ? ?/sec
empty_systems/004_systems 1.00 3.1±0.11µs ? ?/sec 1.00 3.1±0.24µs ? ?/sec
empty_systems/005_systems 1.00 3.5±0.05µs ? ?/sec 1.11 3.9±0.70µs ? ?/sec
empty_systems/010_systems 1.00 5.5±0.12µs ? ?/sec 1.03 5.7±0.17µs ? ?/sec
empty_systems/015_systems 1.00 7.9±0.19µs ? ?/sec 1.06 8.4±0.16µs ? ?/sec
empty_systems/020_systems 1.00 10.4±1.25µs ? ?/sec 1.02 10.6±0.18µs ? ?/sec
empty_systems/025_systems 1.00 12.4±0.39µs ? ?/sec 1.14 14.1±1.07µs ? ?/sec
empty_systems/030_systems 1.00 15.1±0.39µs ? ?/sec 1.05 15.8±0.62µs ? ?/sec
empty_systems/035_systems 1.00 16.9±0.47µs ? ?/sec 1.07 18.0±0.37µs ? ?/sec
empty_systems/040_systems 1.00 19.3±0.41µs ? ?/sec 1.05 20.3±0.39µs ? ?/sec
empty_systems/045_systems 1.00 22.4±1.67µs ? ?/sec 1.02 22.9±0.51µs ? ?/sec
empty_systems/050_systems 1.00 24.4±1.67µs ? ?/sec 1.01 24.7±0.40µs ? ?/sec
empty_systems/055_systems 1.05 28.6±5.27µs ? ?/sec 1.00 27.2±0.70µs ? ?/sec
empty_systems/060_systems 1.02 29.9±1.64µs ? ?/sec 1.00 29.3±0.66µs ? ?/sec
empty_systems/065_systems 1.02 32.7±3.15µs ? ?/sec 1.00 32.1±0.98µs ? ?/sec
empty_systems/070_systems 1.00 33.0±1.42µs ? ?/sec 1.03 34.1±1.44µs ? ?/sec
empty_systems/075_systems 1.00 34.8±0.89µs ? ?/sec 1.04 36.2±0.70µs ? ?/sec
empty_systems/080_systems 1.00 37.0±1.82µs ? ?/sec 1.05 38.7±1.37µs ? ?/sec
empty_systems/085_systems 1.00 38.7±0.76µs ? ?/sec 1.05 40.8±0.83µs ? ?/sec
empty_systems/090_systems 1.00 41.5±1.09µs ? ?/sec 1.04 43.2±0.82µs ? ?/sec
empty_systems/095_systems 1.00 43.6±1.10µs ? ?/sec 1.04 45.2±0.99µs ? ?/sec
empty_systems/100_systems 1.00 46.7±2.27µs ? ?/sec 1.03 48.1±1.25µs ? ?/sec
```
</details>
## Migration Guide
### App `runner` and SubApp `extract` functions are now required to be Send
This was changed to enable pipelined rendering. If this breaks your use case please report it as these new bounds might be able to be relaxed.
## ToDo
* [x] redo benchmarking
* [x] reinvestigate the perf of the try_tick -> run change for task pool scope
# Objective
- Spawn tasks from other threads onto an async executor, but limit those tasks to run on a specific thread.
- This is a continuation of trying to break up some of the changes in pipelined rendering.
- Eventually this will be used to allow `NonSend` systems to run on the main thread in pipelined rendering #6503 and also to solve #6552.
- For this specific PR this allows for us to store a thread executor in a thread local, rather than recreating a scope executor for every scope which should save on a little work.
## Solution
- We create a Executor that does a runtime check for what thread it's on before creating a !Send ticker. The ticker is the only way for the executor to make progress.
---
## Changelog
- create a ThreadExecutor that can only be ticked on one thread.
# Objective
Fix#1991. Allow users to have a bit more control over the creation and finalization of the threads in `TaskPool`.
## Solution
Add new methods to `TaskPoolBuilder` that expose callbacks that are called to initialize and finalize each thread in the `TaskPool`.
Unlike the proposed solution in #1991, the callback is argument-less. If an an identifier is needed, `std:🧵:current` should provide that information easily.
Added a unit test to ensure that they're being called correctly.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/6603
## Solution
- `Task`s will cancel when dropped, but wait until they return Pending before they actually get canceled. That means that if a task panics, it's possible for that error to get propagated to the scope and the scope gets dropped, while scoped tasks in other threads are still running. This is a big problem since scoped task can hold life-timed values that are dropped as the scope is dropped leading to UB.
---
## Changelog
- changed `Scope` to use `FallibleTask` and await the cancellation of all remaining tasks when it's dropped.
