# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
- When running any of the stress tests, the refresh rate is currently
capped to 60hz because of the `ReactiveLowPower` default used when the
window is not in focus. Since stress tests should run as fast as
possible (and as such vsync is disabled for all of them), it makes sense
to always run them in `Continuous` mode. This is especially useful to
avoid capturing non-representative frame times when recording a Tracy
frame.
## Solution
- Always use the `Continuous` update mode in stress tests.
# Objective
Implements #9216
## Solution
- Replace `DiagnosticId` by `DiagnosticPath`. It's pre-hashed using
`const-fnv1a-hash` crate, so it's possible to create path in const
contexts.
---
## Changelog
- Replaced `DiagnosticId` by `DiagnosticPath`
- Set default history length to 120 measurements (2 seconds on 60 fps).
I've noticed hardcoded constant 20 everywhere and decided to change it
to `DEFAULT_MAX_HISTORY_LENGTH` , which is set to new diagnostics by
default. To override it, use `with_max_history_length`.
## Migration Guide
```diff
- const UNIQUE_DIAG_ID: DiagnosticId = DiagnosticId::from_u128(42);
+ const UNIQUE_DIAG_PATH: DiagnosticPath = DiagnosticPath::const_new("foo/bar");
- Diagnostic::new(UNIQUE_DIAG_ID, "example", 10)
+ Diagnostic::new(UNIQUE_DIAG_PATH).with_max_history_length(10)
- diagnostics.add_measurement(UNIQUE_DIAG_ID, || 42);
+ diagnostics.add_measurement(&UNIQUE_DIAG_ID, || 42);
```
# Objective
- Update winit dependency to 0.29
## Changelog
### KeyCode changes
- Removed `ScanCode`, as it was [replaced by
KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292).
- `ReceivedCharacter.char` is now a `SmolStr`, [relevant
doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text).
- Changed most `KeyCode` values, and added more.
KeyCode has changed meaning. With this PR, it refers to physical
position on keyboard rather than the printed letter on keyboard keys.
In practice this means:
- On QWERTY keyboard layouts, nothing changes
- On any other keyboard layout, `KeyCode` no longer reflects the label
on key.
- This is "good". In bevy 0.12, when you used WASD for movement, users
with non-QWERTY keyboards couldn't play your game! This was especially
bad for non-latin keyboards. Now, WASD represents the physical keys. A
French player will press the ZQSD keys, which are near each other,
Kyrgyz players will use "Цфыв".
- This is "bad" as well. You can't know in advance what the label of the
key for input is. Your UI says "press WASD to move", even if in reality,
they should be pressing "ZQSD" or "Цфыв". You also no longer can use
`KeyCode` for text inputs. In any case, it was a pretty bad API for text
input. You should use `ReceivedCharacter` now instead.
### Other changes
- Use `web-time` rather than `instant` crate.
(https://github.com/rust-windowing/winit/pull/2836)
- winit did split `run_return` in `run_onDemand` and `pump_events`, I
did the same change in bevy_winit and used `pump_events`.
- Removed `return_from_run` from `WinitSettings` as `winit::run` now
returns on supported platforms.
- I left the example "return_after_run" as I think it's still useful.
- This winit change is done partly to allow to create a new window after
quitting all windows: https://github.com/emilk/egui/issues/1918 ; this
PR doesn't address.
- added `width` and `height` properties in the `canvas` from wasm
example
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168)
## Known regressions (important follow ups?)
- Provide an API for reacting when a specific key from current layout
was released.
- possible solutions: use winit::Key from winit::KeyEvent ; mapping
between KeyCode and Key ; or .
- We don't receive characters through alt+numpad (e.g. alt + 151 = "ù")
anymore ; reproduced on winit example "ime". maybe related to
https://github.com/rust-windowing/winit/issues/2945
- (windows) Window content doesn't refresh at all when resizing. By
reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect
we should just fire a `window.request_redraw();` from `AboutToWait`, and
handle actual redrawing within `RedrawRequested`. I'm not sure how to
move all that code so I'd appreciate it to be a follow up.
- (windows) unreleased winit fix for using set_control_flow in
AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm
not sure what the implications are, but that feels bad 🤔
## Follow up
I'd like to avoid bloating this PR, here are a few follow up tasks
worthy of a separate PR, or new issue to track them once this PR is
closed, as they would either complicate reviews, or at risk of being
controversial:
- remove CanvasParentResizePlugin
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856)
- avoid mentionning explicitly winit in docs from bevy_window ?
- NamedKey integration on bevy_input:
https://github.com/rust-windowing/winit/pull/3143 introduced a new
NamedKey variant. I implemented it only on the converters but we'd
benefit making the same changes to bevy_input.
- Add more info in KeyboardInput
https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313
- https://github.com/bevyengine/bevy/pull/9905 added a workaround on a
bug allegedly fixed by winit 0.29. We should check if it's still
necessary.
- update to raw_window_handle 0.6
- blocked by wgpu
- Rename `KeyCode` to `PhysicalKeyCode`
https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015
- remove `instant` dependency, [replaced
by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd
need to update to :
- fastrand >= 2.0
- [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7
- [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0
- Verify license, see
[discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800)
- we might be missing a short notice or description of changes made
- Consider using https://github.com/rust-windowing/cursor-icon directly
rather than vendoring it in bevy.
- investigate [this
unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986)
(`winit_window.canvas().unwrap();`)
- Use more good things about winit's update
- https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428
## Migration Guide
This PR should have one.
# Objective
- Resolves#10853
## Solution
- ~~Changed the name of `Input` struct to `PressableInput`.~~
- Changed the name of `Input` struct to `ButtonInput`.
## Migration Guide
- Breaking Change: Users need to rename `Input` to `ButtonInput` in
their projects.
# Objective
Related to #10472.
Not having a hardcoded scale factor makes comparing results from these
stress tests difficult.
Contributors using high dpi screens may be rendering 4x as many pixels
as others (or more). Stress tests may have different behavior when moved
from one monitor in a dual setup to another. At very high resolutions,
different parts of the engine / hardware are being stressed.
1080p is also a far more common resolution for gaming.
## Solution
Use a consistent 1080p with `scale_factor_override: 1.0` everywhere.
In #9903, this sort of change was added specifically to `bevymark` and
`many_cubes` but it makes sense to do it everywhere.
## Discussion
- Maybe we should have a command line option, environment variable, or
`CI_TESTING_CONFIG` option for 1080p / 1440p / 4k.
- Will these look odd (small text?) when screenshotted and shown in the
example showcase? The aspect ratio is the same, but they will be
downscaled from 1080p instead of ~720p.
- Maybe there are other window properties that should be consistent
across stress tests. e.g. `resizable: false`.
- Should we add a `stress_test_window(title)` helper or something?
- Bevymark (pre-10472) was intentionally 800x600 to match "bunnymark", I
believe. I don't personally think this is very important.
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Better consistency with `add_systems`.
- Deprecating `add_plugin` in favor of a more powerful `add_plugins`.
- Allow passing `Plugin` to `add_plugins`.
- Allow passing tuples to `add_plugins`.
## Solution
- `App::add_plugins` now takes an `impl Plugins` parameter.
- `App::add_plugin` is deprecated.
- `Plugins` is a new sealed trait that is only implemented for `Plugin`,
`PluginGroup` and tuples over `Plugins`.
- All examples, benchmarks and tests are changed to use `add_plugins`,
using tuples where appropriate.
---
## Changelog
### Changed
- `App::add_plugins` now accepts all types that implement `Plugins`,
which is implemented for:
- Types that implement `Plugin`.
- Types that implement `PluginGroup`.
- Tuples (up to 16 elements) over types that implement `Plugins`.
- Deprecated `App::add_plugin` in favor of `App::add_plugins`.
## Migration Guide
- Replace `app.add_plugin(plugin)` calls with `app.add_plugins(plugin)`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
I was trying to add some `Diagnostics` to have a better break down of
performance but I noticed that the current implementation uses a
`ResMut` which forces the functions to all run sequentially whereas
before they could run in parallel. This created too great a performance
penalty to be usable.
## Solution
This PR reworks how the diagnostics work with a couple of breaking
changes. The idea is to change how `Diagnostics` works by changing it to
a `SystemParam`. This allows us to hold a `Deferred` buffer of
measurements that can be applied later, avoiding the need for multiple
mutable references to the hashmap. This means we can run systems that
write diagnostic measurements in parallel.
Firstly, we rename the old `Diagnostics` to `DiagnosticsStore`. This
clears up the original name for the new interface while allowing us to
preserve more closely the original API.
Then we create a new `Diagnostics` struct which implements `SystemParam`
and contains a deferred `SystemBuffer`. This can be used very similar to
the old `Diagnostics` for writing new measurements.
```rust
fn system(diagnostics: ResMut<Diagnostics>) { diagnostics.new_measurement(ID, || 10.0)}
// changes to
fn system(mut diagnostics: Diagnostics) { diagnostics.new_measurement(ID, || 10.0)}
```
For reading the diagnostics, the user needs to change from `Diagnostics`
to `DiagnosticsStore` but otherwise the function calls are the same.
Finally, we add a new method to the `App` for registering diagnostics.
This replaces the old method of creating a startup system and adding it
manually.
Testing it, this PR does indeed allow Diagnostic systems to be run in
parallel.
## Changelog
- Change `Diagnostics` to implement `SystemParam` which allows
diagnostic systems to run in parallel.
## Migration Guide
- Register `Diagnostic`'s using the new
`app.register_diagnostic(Diagnostic::new(DIAGNOSTIC_ID,
"diagnostic_name", 10));`
- In systems for writing new measurements, change `mut diagnostics:
ResMut<Diagnostics>` to `mut diagnostics: Diagnostics` to allow the
systems to run in parallel.
- In systems for reading measurements, change `diagnostics:
Res<Diagnostics>` to `diagnostics: Res<DiagnosticsStore>`.
# Objective
- fix clippy lints early to make sure CI doesn't break when they get
promoted to stable
- have a noise-free `clippy` experience for nightly users
## Solution
- `cargo clippy --fix`
- replace `filter_map(|x| x.ok())` with `map_while(|x| x.ok())` to fix
potential infinite loop in case of IO error
# Objective
- Have a default font
## Solution
- Add a font based on FiraMono containing only ASCII characters and use
it as the default font
- It is behind a feature `default_font` enabled by default
- I also updated examples to use it, but not UI examples to still show
how to use a custom font
---
## Changelog
* If you display text without using the default handle provided by
`TextStyle`, the text will be displayed
# Objective
Add a convenient immediate mode drawing API for visual debugging.
Fixes#5619
Alternative to #1625
Partial alternative to #5734
Based off https://github.com/Toqozz/bevy_debug_lines with some changes:
* Simultaneous support for 2D and 3D.
* Methods for basic shapes; circles, spheres, rectangles, boxes, etc.
* 2D methods.
* Removed durations. Seemed niche, and can be handled by users.
<details>
<summary>Performance</summary>
Stress tested using Bevy's recommended optimization settings for the dev
profile with the
following command.
```bash
cargo run --example many_debug_lines \
--config "profile.dev.package.\"*\".opt-level=3" \
--config "profile.dev.opt-level=1"
```
I dipped to 65-70 FPS at 300,000 lines
CPU: 3700x
RAM Speed: 3200 Mhz
GPU: 2070 super - probably not very relevant, mostly cpu/memory bound
</details>
<details>
<summary>Fancy bloom screenshot</summary>
</details>
## Changelog
* Added `GizmoPlugin`
* Added `Gizmos` system parameter for drawing lines and wireshapes.
### TODO
- [ ] Update changelog
- [x] Update performance numbers
- [x] Add credit to PR description
### Future work
- Cache rendering primitives instead of constructing them out of line
segments each frame.
- Support for drawing solid meshes
- Interactions. (See
[bevy_mod_gizmos](https://github.com/LiamGallagher737/bevy_mod_gizmos))
- Fancier line drawing. (See
[bevy_polyline](https://github.com/ForesightMiningSoftwareCorporation/bevy_polyline))
- Support for `RenderLayers`
- Display gizmos for a certain duration. Currently everything displays
for one frame (ie. immediate mode)
- Changing settings per drawn item like drawing on top or drawing to
different `RenderLayers`
Co-Authored By: @lassade <felipe.jorge.pereira@gmail.com>
Co-Authored By: @The5-1 <agaku@hotmail.de>
Co-Authored By: @Toqozz <toqoz@hotmail.com>
Co-Authored By: @nicopap <nico@nicopap.ch>
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: IceSentry <c.giguere42@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
