315 commits

Author	SHA1	Message	Date
James O'Brien	eb3c81374a	Generalised ECS reactivity with Observers (#10839) ... # Objective - Provide an expressive way to register dynamic behavior in response to ECS changes that is consistent with existing bevy types and traits as to provide a smooth user experience. - Provide a mechanism for immediate changes in response to events during command application in order to facilitate improved query caching on the path to relations. ## Solution - A new fundamental ECS construct, the `Observer`; inspired by flec's observers but adapted to better fit bevy's access patterns and rust's type system. --- ## Examples There are 3 main ways to register observers. The first is a "component observer" that looks like this: ```rust world.observe(|trigger: Trigger<OnAdd, Transform>, query: Query<&Transform>| { let transform = query.get(trigger.entity()).unwrap(); }); ``` The above code will spawn a new entity representing the observer that will run it's callback whenever the `Transform` component is added to an entity. This is a system-like function that supports dependency injection for all the standard bevy types: `Query`, `Res`, `Commands` etc. It also has a `Trigger` parameter that provides information about the trigger such as the target entity, and the event being triggered. Importantly these systems run during command application which is key for their future use to keep ECS internals up to date. There are similar events for `OnInsert` and `OnRemove`, and this will be expanded with things such as `ArchetypeCreated`, `TableEmpty` etc. in follow up PRs. Another way to register an observer is an "entity observer" that looks like this: ```rust world.entity_mut(entity).observe(|trigger: Trigger<Resize>| { // ... }); ``` Entity observers run whenever an event of their type is triggered targeting that specific entity. This type of observer will de-spawn itself if the entity (or entities) it is observing is ever de-spawned so as to not leave dangling observers. Entity observers can also be spawned from deferred contexts such as other observers, systems, or hooks using commands: ```rust commands.entity(entity).observe(|trigger: Trigger<Resize>| { // ... }); ``` Observers are not limited to in built event types, they can be used with any type that implements `Event` (which has been extended to implement Component). This means events can also carry data: ```rust #[derive(Event)] struct Resize { x: u32, y: u32 } commands.entity(entity).observe(|trigger: Trigger<Resize>, query: Query<&mut Size>| { let event = trigger.event(); // ... }); // Will trigger the observer when commands are applied. commands.trigger_targets(Resize { x: 10, y: 10 }, entity); ``` You can also trigger events that target more than one entity at a time: ```rust commands.trigger_targets(Resize { x: 10, y: 10 }, [e1, e2]); ``` Additionally, Observers don't _need_ entity targets: ```rust app.observe(|trigger: Trigger<Quit>| { }) commands.trigger(Quit); ``` In these cases, `trigger.entity()` will be a placeholder. Observers are actually just normal entities with an `ObserverState` and `Observer` component! The `observe()` functions above are just shorthand for: ```rust world.spawn(Observer::new(|trigger: Trigger<Resize>| {}); ``` This will spawn the `Observer` system and use an `on_add` hook to add the `ObserverState` component. Dynamic components and trigger types are also fully supported allowing for runtime defined trigger types. ## Possible Follow-ups 1. Deprecate `RemovedComponents`, observers should fulfill all use cases while being more flexible and performant. 2. Queries as entities: Swap queries to entities and begin using observers listening to archetype creation triggers to keep their caches in sync, this allows unification of `ObserverState` and `QueryState` as well as unlocking several API improvements for `Query` and the management of `QueryState`. 3. Trigger bubbling: For some UI use cases in particular users are likely to want some form of bubbling for entity observers, this is trivial to implement naively but ideally this includes an acceleration structure to cache hierarchy traversals. 4. All kinds of other in-built trigger types. 5. Optimization; in order to not bloat the complexity of the PR I have kept the implementation straightforward, there are several areas where performance can be improved. The focus for this PR is to get the behavior implemented and not incur a performance cost for users who don't use observers. I am leaving each of these to follow up PR's in order to keep each of them reviewable as this already includes significant changes. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: MiniaczQ <xnetroidpl@gmail.com> Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2024-06-15 01:33:26 +00:00
Lynn	c172c3c4b5	Custom primitives example (#13795) ... # Objective - Add a new example showcasing how to add custom primitives and what you can do with them. ## Solution - Added a new example `custom_primitives` with a 2D heart shape primitive highlighting - `Bounded2d` by implementing and visualising bounding shapes, - `Measured2d` by implementing it, - `Meshable` to show the shape on the screen - The example also includes an `Extrusion<Heart>` implementing - `Measured3d`, - `Bounded3d` using the `BoundedExtrusion` trait and - meshing using the `Extrudable` trait. ## Additional information Here are two images of the heart and its extrusion:   --------- Co-authored-by: Jakub Marcowski <37378746+Chubercik@users.noreply.github.com>	2024-06-10 21:15:21 +00:00
Matty	a569b35c18	Stable interpolation and smooth following (#13741) ... # Objective Partially address #13408 Rework of #13613 Unify the very nice forms of interpolation specifically present in `bevy_math` under a shared trait upon which further behavior can be based. The ideas in this PR were prompted by [Lerp smoothing is broken by Freya Holmer](https://www.youtube.com/watch?v=LSNQuFEDOyQ). ## Solution There is a new trait `StableInterpolate` in `bevy_math::common_traits` which enshrines a quite-specific notion of interpolation with a lot of guarantees: ```rust /// A type with a natural interpolation that provides strong subdivision guarantees. /// /// Although the only required method is `interpolate_stable`, many things are expected of it: /// /// 1. The notion of interpolation should follow naturally from the semantics of the type, so /// that inferring the interpolation mode from the type alone is sensible. /// /// 2. The interpolation recovers something equivalent to the starting value at `t = 0.0` /// and likewise with the ending value at `t = 1.0`. /// /// 3. Importantly, the interpolation must be *subdivision-stable*: for any interpolation curve /// between two (unnamed) values and any parameter-value pairs `(t0, p)` and `(t1, q)`, the /// interpolation curve between `p` and `q` must be the *linear* reparametrization of the original /// interpolation curve restricted to the interval `[t0, t1]`. /// /// The last of these conditions is very strong and indicates something like constant speed. It /// is called "subdivision stability" because it guarantees that breaking up the interpolation /// into segments and joining them back together has no effect. /// /// Here is a diagram depicting it: /// ```text /// top curve = u.interpolate_stable(v, t) /// /// t0 => p t1 => q /// |-------------|---------|-------------| /// 0 => u / \ 1 => v /// / \ /// / \ /// / linear \ /// / reparametrization \ /// / t = t0 * (1 - s) + t1 * s \ /// / \ /// |-------------------------------------| /// 0 => p 1 => q /// /// bottom curve = p.interpolate_stable(q, s) /// ``` /// /// Note that some common forms of interpolation do not satisfy this criterion. For example, /// [`Quat::lerp`] and [`Rot2::nlerp`] are not subdivision-stable. /// /// Furthermore, this is not to be used as a general trait for abstract interpolation. /// Consumers rely on the strong guarantees in order for behavior based on this trait to be /// well-behaved. /// /// [`Quat::lerp`]: crate::Quat::lerp /// [`Rot2::nlerp`]: crate::Rot2::nlerp pub trait StableInterpolate: Clone { /// Interpolate between this value and the `other` given value using the parameter `t`. /// Note that the parameter `t` is not necessarily clamped to lie between `0` and `1`. /// When `t = 0.0`, `self` is recovered, while `other` is recovered at `t = 1.0`, /// with intermediate values lying between the two. fn interpolate_stable(&self, other: &Self, t: f32) -> Self; } ``` This trait has a blanket implementation over `NormedVectorSpace`, where `lerp` is used, along with implementations for `Rot2`, `Quat`, and the direction types using variants of `slerp`. Other areas may choose to implement this trait in order to hook into its functionality, but the stringent requirements must actually be met. This trait bears no direct relationship with `bevy_animation`'s `Animatable` trait, although they may choose to use `interpolate_stable` in their trait implementations if they wish, as both traits involve type-inferred interpolations of the same kind. `StableInterpolate` is not a supertrait of `Animatable` for a couple reasons: 1. Notions of interpolation in animation are generally going to be much more general than those allowed under these constraints. 2. Laying out these generalized interpolation notions is the domain of `bevy_animation` rather than of `bevy_math`. (Consider also that inferring interpolation from types is not universally desirable.) Similarly, this is not implemented on `bevy_color`'s color types, although their current mixing behavior does meet the conditions of the trait. As an aside, the subdivision-stability condition is of interest specifically for the [Curve RFC](https://github.com/bevyengine/rfcs/pull/80), where it also ensures a kind of stability for subsampling. Importantly, this trait ensures that the "smooth following" behavior defined in this PR behaves predictably: ```rust /// Smoothly nudge this value towards the `target` at a given decay rate. The `decay_rate` /// parameter controls how fast the distance between `self` and `target` decays relative to /// the units of `delta`; the intended usage is for `decay_rate` to generally remain fixed, /// while `delta` is something like `delta_time` from an updating system. This produces a /// smooth following of the target that is independent of framerate. /// /// More specifically, when this is called repeatedly, the result is that the distance between /// `self` and a fixed `target` attenuates exponentially, with the rate of this exponential /// decay given by `decay_rate`. /// /// For example, at `decay_rate = 0.0`, this has no effect. /// At `decay_rate = f32::INFINITY`, `self` immediately snaps to `target`. /// In general, higher rates mean that `self` moves more quickly towards `target`. /// /// # Example /// ``` /// # use bevy_math::{Vec3, StableInterpolate}; /// # let delta_time: f32 = 1.0 / 60.0; /// let mut object_position: Vec3 = Vec3::ZERO; /// let target_position: Vec3 = Vec3::new(2.0, 3.0, 5.0); /// // Decay rate of ln(10) => after 1 second, remaining distance is 1/10th /// let decay_rate = f32::ln(10.0); /// // Calling this repeatedly will move `object_position` towards `target_position`: /// object_position.smooth_nudge(&target_position, decay_rate, delta_time); /// ``` fn smooth_nudge(&mut self, target: &Self, decay_rate: f32, delta: f32) { self.interpolate_stable_assign(target, 1.0 - f32::exp(-decay_rate * delta)); } ``` As the documentation indicates, the intention is for this to be called in game update systems, and `delta` would be something like `Time::delta_seconds` in Bevy, allowing positions, orientations, and so on to smoothly follow a target. A new example, `smooth_follow`, demonstrates a basic implementation of this, with a sphere smoothly following a sharply moving target: https://github.com/bevyengine/bevy/assets/2975848/7124b28b-6361-47e3-acf7-d1578ebd0347 ## Testing Tested by running the example with various parameters.	2024-06-10 12:50:59 +00:00
Julian	33dff0d3f7	2D top-down camera example (#12720) ... # Objective This PR addresses the 2D part of #12658. I plan to separate the examples and make one PR per camera example. ## Solution Added a new top-down example composed of: - [x] Player keyboard movements - [x] UI for keyboard instructions - [x] Colors and bloom effect to see the movement of the player - [x] Camera smooth movement towards the player (lerp) ## Testing ```bash cargo run --features="wayland,bevy/dynamic_linking" --example 2d_top_down_camera ``` https://github.com/bevyengine/bevy/assets/10638479/95db0587-e5e0-4f55-be11-97444b795793	2024-06-10 12:33:48 +00:00
MiniaczQ	49338245ea	Generalize StateTransitionEvent<S> to allow identity transitions (#13579) ... # Objective This PR addresses one of the issues from [discord state discussion](https://discord.com/channels/691052431525675048/1237949214017716356). Same-state transitions can be desirable, so there should exist a hook for them. Fixes https://github.com/bevyengine/bevy/issues/9130. ## Solution - Allow `StateTransitionEvent<S>` to contain identity transitions. - Ignore identity transitions at schedule running level (`OnExit`, `OnTransition`, `OnEnter`). - Propagate identity transitions through `SubStates` and `ComputedStates`. - Add example about registering custom transition schedules. ## Changelog - `StateTransitionEvent<S>` can be emitted with same `exited` and `entered` state. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2024-06-04 14:23:24 +00:00
Patrick Walton	df8ccb8735	Implement PBR anisotropy per KHR_materials_anisotropy. (#13450) ... This commit implements support for physically-based anisotropy in Bevy's `StandardMaterial`, following the specification for the [`KHR_materials_anisotropy`] glTF extension. [*Anisotropy*] (not to be confused with [anisotropic filtering]) is a PBR feature that allows roughness to vary along the tangent and bitangent directions of a mesh. In effect, this causes the specular light to stretch out into lines instead of a round lobe. This is useful for modeling brushed metal, hair, and similar surfaces. Support for anisotropy is a common feature in major game and graphics engines; Unity, Unreal, Godot, three.js, and Blender all support it to varying degrees. Two new parameters have been added to `StandardMaterial`: `anisotropy_strength` and `anisotropy_rotation`. Anisotropy strength, which ranges from 0 to 1, represents how much the roughness differs between the tangent and the bitangent of the mesh. In effect, it controls how stretched the specular highlight is. Anisotropy rotation allows the roughness direction to differ from the tangent of the model. In addition to these two fixed parameters, an *anisotropy texture* can be supplied. Such a texture should be a 3-channel RGB texture, where the red and green values specify a direction vector using the same conventions as a normal map ([0, 1] color values map to [-1, 1] vector values), and the the blue value represents the strength. This matches the format that the [`KHR_materials_anisotropy`] specification requires. Such textures should be loaded as linear and not sRGB. Note that this texture does consume one additional texture binding in the standard material shader. The glTF loader has been updated to properly parse the `KHR_materials_anisotropy` extension. A new example, `anisotropy`, has been added. This example loads and displays the barn lamp example from the [`glTF-Sample-Assets`] repository. Note that the textures were rather large, so I shrunk them down and converted them to a mixture of JPEG and KTX2 format, in the interests of saving space in the Bevy repository. [*Anisotropy*]: https://google.github.io/filament/Filament.md.html#materialsystem/anisotropicmodel [anisotropic filtering]: https://en.wikipedia.org/wiki/Anisotropic_filtering [`KHR_materials_anisotropy`]: https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_anisotropy/README.md [`glTF-Sample-Assets`]: https://github.com/KhronosGroup/glTF-Sample-Assets/ ## Changelog ### Added * Physically-based anisotropy is now available for materials, which enhances the look of surfaces such as brushed metal or hair. glTF scenes can use the new feature with the `KHR_materials_anisotropy` extension. ## Screenshots With anisotropy:  Without anisotropy: 	2024-06-03 23:46:06 +00:00
Mark Moissette	d26900a9ea	add handling of all missing gltf extras: scene, mesh & materials (#13453) ... # Objective - fixes #4823 ## Solution As outlined in the discussion in the linked issue as the best current solution, this PR adds specific GltfExtras for - scenes - meshes - materials - As it is , it is not a breaking change, I hesitated to rename the current "GltfExtras" component to "PrimitiveGltfExtras", but that would result in a breaking change and might be a bit confusing as to what "primitive" that refers to. ## Testing - I included a bare-bones example & asset (exported gltf file from Blender) with gltf extras at all the relevant levels : scene, mesh, material --- ## Changelog - adds "SceneGltfExtras" injected at the scene level if any - adds "MeshGltfExtras", injected at the mesh level if any - adds "MaterialGltfExtras", injected at the mesh level if any: ie if a mesh has a material that has gltf extras, the component will be injected there.	2024-06-03 13:16:38 +00:00
Pietro	061bee7e3c	fix: upgrade to winit v0.30 (#13366) ... # Objective - Upgrade winit to v0.30 - Fixes https://github.com/bevyengine/bevy/issues/13331 ## Solution This is a rewrite/adaptation of the new trait system described and implemented in `winit` v0.30. ## Migration Guide The custom UserEvent is now renamed as WakeUp, used to wake up the loop if anything happens outside the app (a new [custom_user_event](https://github.com/bevyengine/bevy/pull/13366/files#diff-2de8c0a8d3028d0059a3d80ae31b2bbc1cde2595ce2d317ea378fe3e0cf6ef2d) shows this behavior. The internal `UpdateState` has been removed and replaced internally by the AppLifecycle. When changed, the AppLifecycle is sent as an event. The `UpdateMode` now accepts only two values: `Continuous` and `Reactive`, but the latter exposes 3 new properties to enable reactive to device, user or window events. The previous `UpdateMode::Reactive` is now equivalent to `UpdateMode::reactive()`, while `UpdateMode::ReactiveLowPower` to `UpdateMode::reactive_low_power()`. The `ApplicationLifecycle` has been renamed as `AppLifecycle`, and now contains the possible values of the application state inside the event loop: * `Idle`: the loop has not started yet * `Running` (previously called `Started`): the loop is running * `WillSuspend`: the loop is going to be suspended * `Suspended`: the loop is suspended * `WillResume`: the loop is going to be resumed Note: the `Resumed` state has been removed since the resumed app is just running. Finally, now that `winit` enables this, it extends the `WinitPlugin` to support custom events. ## Test platforms - [x] Windows - [x] MacOs - [x] Linux (x11) - [x] Linux (Wayland) - [x] Android - [x] iOS - [x] WASM/WebGPU - [x] WASM/WebGL2 ## Outstanding issues / regressions - [ ] iOS: build failed in CI - blocking, but may just be flakiness - [x] Cross-platform: when the window is maximised, changes in the scale factor don't apply, to make them apply one has to make the window smaller again. (Re-maximising keeps the updated scale factor) - non-blocking, but good to fix - [ ] Android: it's pretty easy to quickly open and close the app and then the music keeps playing when suspended. - non-blocking but worrying - [ ] Web: the application will hang when switching tabs - Not new, duplicate of https://github.com/bevyengine/bevy/issues/13486 - [ ] Cross-platform?: Screenshot failure, `ERROR present_frames: wgpu_core::present: No work has been submitted for this frame before` taking the first screenshot, but after pressing space - non-blocking, but good to fix --------- Co-authored-by: François <francois.mockers@vleue.com>	2024-06-03 13:06:48 +00:00
IQuick 143	f67ae29338	Create a primitive sampling showcase example (#13519) ... # Objective - Show + Visually Test that 3D primitive sampling works - Make an example that looks nice. ## Solution - Added a `sampling_primitives` examples which shows all the 3D primitives being sampled, with a firefly aesthetic.  ## Testing - `cargo run --example sampling_primitives` - Haven't tested WASM. ## Changelog ### Added - Added a new example, `sampling_primitives`, to showcase all the 3D sampleable primitives. ## Additional notes: This example borrowed a bunch of code from the other sampling example, by @mweatherley. In future updates this example should be updated with new 3D primitives as they become sampleable. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>	2024-05-27 16:44:52 +00:00
Matty	787df44288	Example for random sampling (#13507) ... # Objective We introduced a bunch of neat random sampling stuff in this release; we should do a good job of showing people how to use it, and writing examples is part of this. ## Solution A new Math example, `random_sampling`, shows off the `ShapeSample` API functionality. For the moment, it renders a cube and allows the user to sample points from its interior or boundary in sets of either 1 or 100: <img width="1440" alt="Screenshot 2024-05-25 at 1 16 08 PM" src="https://github.com/bevyengine/bevy/assets/2975848/9cb6f53f-c89a-42c2-8907-b11d294c402a"> On the level of code, these are reflected by two ways of using `ShapeSample`: ```rust // Get a single random Vec3: let sample: Vec3 = match *mode { Mode::Interior => shape.0.sample_interior(rng), Mode::Boundary => shape.0.sample_boundary(rng), }; ``` ```rust // Get 100 random Vec3s: let samples: Vec<Vec3> = match *mode { Mode::Interior => { let dist = shape.0.interior_dist(); dist.sample_iter(&mut rng).take(100).collect() } Mode::Boundary => { let dist = shape.0.boundary_dist(); dist.sample_iter(&mut rng).take(100).collect() } }; ``` ## Testing Run the example! ## Discussion Maybe in the future it would be nice to show off all of the different shapes that we have implemented `ShapeSample` for, but I wanted to start just by demonstrating the functionality. Here, I chose a cube because it's simple and because it looks good rendered transparently with backface culling disabled.	2024-05-27 13:46:11 +00:00
Patrick Walton	f398674e51	Implement opt-in sharp screen-space reflections for the deferred renderer, with improved raymarching code. (#13418) ... This commit, a revamp of #12959, implements screen-space reflections (SSR), which approximate real-time reflections based on raymarching through the depth buffer and copying samples from the final rendered frame. This patch is a relatively minimal implementation of SSR, so as to provide a flexible base on which to customize and build in the future. However, it's based on the production-quality [raymarching code by Tomasz Stachowiak](https://gist.github.com/h3r2tic/9c8356bdaefbe80b1a22ae0aaee192db). For a general basic overview of screen-space reflections, see [1](https://lettier.github.io/3d-game-shaders-for-beginners/screen-space-reflection.html). The raymarching shader uses the basic algorithm of tracing forward in large steps, refining that trace in smaller increments via binary search, and then using the secant method. No temporal filtering or roughness blurring, is performed at all; for this reason, SSR currently only operates on very shiny surfaces. No acceleration via the hierarchical Z-buffer is implemented (though note that https://github.com/bevyengine/bevy/pull/12899 will add the infrastructure for this). Reflections are traced at full resolution, which is often considered slow. All of these improvements and more can be follow-ups. SSR is built on top of the deferred renderer and is currently only supported in that mode. Forward screen-space reflections are possible albeit uncommon (though e.g. *Doom Eternal* uses them); however, they require tracing from the previous frame, which would add complexity. This patch leaves the door open to implementing SSR in the forward rendering path but doesn't itself have such an implementation. Screen-space reflections aren't supported in WebGL 2, because they require sampling from the depth buffer, which Naga can't do because of a bug (`sampler2DShadow` is incorrectly generated instead of `sampler2D`; this is the same reason why depth of field is disabled on that platform). To add screen-space reflections to a camera, use the `ScreenSpaceReflectionsBundle` bundle or the `ScreenSpaceReflectionsSettings` component. In addition to `ScreenSpaceReflectionsSettings`, `DepthPrepass` and `DeferredPrepass` must also be present for the reflections to show up. The `ScreenSpaceReflectionsSettings` component contains several settings that artists can tweak, and also comes with sensible defaults. A new example, `ssr`, has been added. It's loosely based on the [three.js ocean sample](https://threejs.org/examples/webgl_shaders_ocean.html), but all the assets are original. Note that the three.js demo has no screen-space reflections and instead renders a mirror world. In contrast to #12959, this demo tests not only a cube but also a more complex model (the flight helmet). ## Changelog ### Added * Screen-space reflections can be enabled for very smooth surfaces by adding the `ScreenSpaceReflections` component to a camera. Deferred rendering must be enabled for the reflections to appear.  	2024-05-27 13:43:40 +00:00
Ben Harper	ec01c2dc45	New circular primitives: Arc2d, CircularSector, CircularSegment (#13482) ... # Objective Adopted #11748 ## Solution I've rebased on main to fix the merge conflicts. ~~Not quite ready to merge yet~~ * Clippy is happy and the tests are passing, but... * ~~The new shapes in `examples/2d/2d_shapes.rs` don't look right at all~~ Never mind, looks like radians and degrees just got mixed up at some point? * I have updated one doc comment based on a review in the original PR. --------- Co-authored-by: Alexis "spectria" Horizon <spectria.limina@gmail.com> Co-authored-by: Alexis "spectria" Horizon <118812919+spectria-limina@users.noreply.github.com> Co-authored-by: Joona Aalto <jondolf.dev@gmail.com> Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Ben Harper <ben@tukom.org>	2024-05-23 16:12:46 +00:00
Mincong Lu	1d950e6195	Allow AssetServer::load to acquire a guard item. (#13051) ... # Objective Supercedes #12881 . Added a simple implementation that allows the user to react to multiple asset loads both synchronously and asynchronously. ## Solution Added `load_acquire`, that holds an item and drops it when loading is finished or failed. When used synchronously Hold an `Arc<()>`, check for `Arc::strong_count() == 1` when all loading completed. When used asynchronously Hold a `SemaphoreGuard`, await on `acquire_all` for completion. This implementation has more freedom than the original in my opinion. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Zachary Harrold <zac@harrold.com.au>	2024-05-23 13:28:29 +00:00
Gino Valente	5db52663b3	bevy_reflect: Custom attributes (#11659) ... # Objective As work on the editor starts to ramp up, it might be nice to start allowing types to specify custom attributes. These can be used to provide certain functionality to fields, such as ranges or controlling how data is displayed. A good example of this can be seen in [`bevy-inspector-egui`](https://github.com/jakobhellermann/bevy-inspector-egui) with its [`InspectorOptions`](https://docs.rs/bevy-inspector-egui/0.22.1/bevy_inspector_egui/struct.InspectorOptions.html): ```rust #[derive(Reflect, Default, InspectorOptions)] #[reflect(InspectorOptions)] struct Slider { #[inspector(min = 0.0, max = 1.0)] value: f32, } ``` Normally, as demonstrated in the example above, these attributes are handled by a derive macro and stored in a corresponding `TypeData` struct (i.e. `ReflectInspectorOptions`). Ideally, we would have a good way of defining this directly via reflection so that users don't need to create and manage a whole proc macro just to allow these sorts of attributes. And note that this doesn't have to just be for inspectors and editors. It can be used for things done purely on the code side of things. ## Solution Create a new method for storing attributes on fields via the `Reflect` derive. These custom attributes are stored in type info (e.g. `NamedField`, `StructInfo`, etc.). ```rust #[derive(Reflect)] struct Slider { #[reflect(@0.0..=1.0)] value: f64, } let TypeInfo::Struct(info) = Slider::type_info() else { panic!("expected struct info"); }; let field = info.field("value").unwrap(); let range = field.get_attribute::<RangeInclusive<f64>>().unwrap(); assert_eq!(*range, 0.0..=1.0); ``` ## TODO - [x] ~~Bikeshed syntax~~ Went with a type-based approach, prefixed by `@` for ease of parsing and flexibility - [x] Add support for custom struct/tuple struct field attributes - [x] Add support for custom enum variant field attributes - [x] ~~Add support for custom enum variant attributes (maybe?)~~ ~~Will require a larger refactor. Can be saved for a future PR if we really want it.~~ Actually, we apparently still have support for variant attributes despite not using them, so it was pretty easy to add lol. - [x] Add support for custom container attributes - [x] Allow custom attributes to store any reflectable value (not just `Lit`) - [x] ~~Store attributes in registry~~ This PR used to store these in attributes in the registry, however, it has since switched over to storing them in type info - [x] Add example ## Bikeshedding > [!note] > This section was made for the old method of handling custom attributes, which stored them by name (i.e. `some_attribute = 123`). The PR has shifted away from that, to a more type-safe approach. > > This section has been left for reference. There are a number of ways we can syntactically handle custom attributes. Feel free to leave a comment on your preferred one! Ideally we want one that is clear, readable, and concise since these will potentially see _a lot_ of use. Below is a small, non-exhaustive list of them. Note that the `skip_serializing` reflection attribute is added to demonstrate how each case plays with existing reflection attributes. <details> <summary>List</summary> ##### 1. `@(name = value)` > The `@` was chosen to make them stand out from other attributes and because the "at" symbol is a subtle pneumonic for "attribute". Of course, other symbols could be used (e.g. `$`, `#`, etc.). ```rust #[derive(Reflect)] struct Slider { #[reflect(@(min = 0.0, max = 1.0), skip_serializing)] #[[reflect(@(bevy_editor::hint = "Range: 0.0 to 1.0"))] value: f32, } ``` ##### 2. `@name = value` > This is my personal favorite. ```rust #[derive(Reflect)] struct Slider { #[reflect(@min = 0.0, @max = 1.0, skip_serializing)] #[[reflect(@bevy_editor::hint = "Range: 0.0 to 1.0")] value: f32, } ``` ##### 3. `custom_attr(name = value)` > `custom_attr` can be anything. Other possibilities include `with` or `tag`. ```rust #[derive(Reflect)] struct Slider { #[reflect(custom_attr(min = 0.0, max = 1.0), skip_serializing)] #[[reflect(custom_attr(bevy_editor::hint = "Range: 0.0 to 1.0"))] value: f32, } ``` ##### 4. `reflect_attr(name = value)` ```rust #[derive(Reflect)] struct Slider { #[reflect(skip_serializing)] #[reflect_attr(min = 0.0, max = 1.0)] #[[reflect_attr(bevy_editor::hint = "Range: 0.0 to 1.0")] value: f32, } ``` </details> --- ## Changelog - Added support for custom attributes on reflected types (i.e. `#[reflect(@Foo::new("bar")]`)	2024-05-20 19:30:21 +00:00
Patrick Walton	19bfa41768	Implement volumetric fog and volumetric lighting, also known as light shafts or god rays. (#13057) ... This commit implements a more physically-accurate, but slower, form of fog than the `bevy_pbr::fog` module does. Notably, this *volumetric fog* allows for light beams from directional lights to shine through, creating what is known as *light shafts* or *god rays*. To add volumetric fog to a scene, add `VolumetricFogSettings` to the camera, and add `VolumetricLight` to directional lights that you wish to be volumetric. `VolumetricFogSettings` has numerous settings that allow you to define the accuracy of the simulation, as well as the look of the fog. Currently, only interaction with directional lights that have shadow maps is supported. Note that the overhead of the effect scales directly with the number of directional lights in use, so apply `VolumetricLight` sparingly for the best results. The overall algorithm, which is implemented as a postprocessing effect, is a combination of the techniques described in [Scratchapixel] and [this blog post]. It uses raymarching in screen space, transformed into shadow map space for sampling and combined with physically-based modeling of absorption and scattering. Bevy employs the widely-used [Henyey-Greenstein phase function] to model asymmetry; this essentially allows light shafts to fade into and out of existence as the user views them. Volumetric rendering is a huge subject, and I deliberately kept the scope of this commit small. Possible follow-ups include: 1. Raymarching at a lower resolution. 2. A post-processing blur (especially useful when combined with (1)). 3. Supporting point lights and spot lights. 4. Supporting lights with no shadow maps. 5. Supporting irradiance volumes and reflection probes. 6. Voxel components that reuse the volumetric fog code to create voxel shapes. 7. *Horizon: Zero Dawn*-style clouds. These are all useful, but out of scope of this patch for now, to keep things tidy and easy to review. A new example, `volumetric_fog`, has been added to demonstrate the effect. ## Changelog ### Added * A new component, `VolumetricFog`, is available, to allow for a more physically-accurate, but more resource-intensive, form of fog. * A new component, `VolumetricLight`, can be placed on directional lights to make them interact with `VolumetricFog`. Notably, this allows such lights to emit light shafts/god rays.   [Scratchapixel]: https://www.scratchapixel.com/lessons/3d-basic-rendering/volume-rendering-for-developers/intro-volume-rendering.html [this blog post]: https://www.alexandre-pestana.com/volumetric-lights/ [Henyey-Greenstein phase function]: https://www.pbr-book.org/4ed/Volume_Scattering/Phase_Functions#TheHenyeyndashGreensteinPhaseFunction	2024-05-16 17:13:18 +00:00
Patrick Walton	df31b808c3	Implement fast depth of field as a postprocessing effect. (#13009) ... This commit implements the [depth of field] effect, simulating the blur of objects out of focus of the virtual lens. Either the [hexagonal bokeh] effect or a faster Gaussian blur may be used. In both cases, the implementation is a simple separable two-pass convolution. This is not the most physically-accurate real-time bokeh technique that exists; Unreal Engine has [a more accurate implementation] of "cinematic depth of field" from 2018. However, it's simple, and most engines provide something similar as a fast option, often called "mobile" depth of field. The general approach is outlined in [a blog post from 2017]. We take advantage of the fact that both Gaussian blurs and hexagonal bokeh blurs are *separable*. This means that their 2D kernels can be reduced to a small number of 1D kernels applied one after another, asymptotically reducing the amount of work that has to be done. Gaussian blurs can be accomplished by blurring horizontally and then vertically, while hexagonal bokeh blurs can be done with a vertical blur plus a diagonal blur, plus two diagonal blurs. In both cases, only two passes are needed. Bokeh requires the first pass to have a second render target and requires two subpasses in the second pass, which decreases its performance relative to the Gaussian blur. The bokeh blur is generally more aesthetically pleasing than the Gaussian blur, as it simulates the effect of a camera more accurately. The shape of the bokeh circles are determined by the number of blades of the aperture. In our case, we use a hexagon, which is usually considered specific to lower-quality cameras. (This is a downside of the fast hexagon approach compared to the higher-quality approaches.) The blur amount is generally specified by the [f-number], which we use to compute the focal length from the film size and FOV. By default, we simulate standard cinematic cameras of f/1 and [Super 35]. The developer can customize these values as desired. A new example has been added to demonstrate depth of field. It allows customization of the mode (Gaussian vs. bokeh), focal distance and f-numbers. The test scene is inspired by a [blog post on depth of field in Unity]; however, the effect is implemented in a completely different way from that blog post, and all the assets (textures, etc.) are original. Bokeh depth of field:  Gaussian depth of field:  No depth of field:  [depth of field]: https://en.wikipedia.org/wiki/Depth_of_field [hexagonal bokeh]: https://colinbarrebrisebois.com/2017/04/18/hexagonal-bokeh-blur-revisited/ [a more accurate implementation]: https://epicgames.ent.box.com/s/s86j70iamxvsuu6j35pilypficznec04 [a blog post from 2017]: https://colinbarrebrisebois.com/2017/04/18/hexagonal-bokeh-blur-revisited/ [f-number]: https://en.wikipedia.org/wiki/F-number [Super 35]: https://en.wikipedia.org/wiki/Super_35 [blog post on depth of field in Unity]: https://catlikecoding.com/unity/tutorials/advanced-rendering/depth-of-field/ ## Changelog ### Added * A depth of field postprocessing effect is now available, to simulate objects being out of focus of the camera. To use it, add `DepthOfFieldSettings` to an entity containing a `Camera3d` component. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Bram Buurlage <brambuurlage@gmail.com>	2024-05-13 18:23:56 +00:00
Lee-Orr	42ba9dfaea	Separate state crate (#13216) ... # Objective Extracts the state mechanisms into a new crate called "bevy_state". This comes with a few goals: - state wasn't really an inherent machinery of the ecs system, and so keeping it within bevy_ecs felt forced - by mixing it in with bevy_ecs, the maintainability of our more robust state system was significantly compromised moving state into a new crate makes it easier to encapsulate as it's own feature, and easier to read and understand since it's no longer a single, massive file. ## Solution move the state-related elements from bevy_ecs to a new crate ## Testing - Did you test these changes? If so, how? all the automated tests migrated and passed, ran the pre-existing examples without changes to validate. --- ## Migration Guide Since bevy_state is now gated behind the `bevy_state` feature, projects that use state but don't use the `default-features` will need to add that feature flag. Since it is no longer part of bevy_ecs, projects that use bevy_ecs directly will need to manually pull in `bevy_state`, trigger the StateTransition schedule, and handle any of the elements that bevy_app currently sets up. --------- Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>	2024-05-09 18:06:05 +00:00
Vitaliy Sapronenko	d9d305dab5	Headless renderer example has been added (#13006) ... # Objective Fixes #11457. Fixes #22. ## Solution Based on [another headless application](https://github.com/richardanaya/headless/) --- ## Changelog - Adopted to bevy 0.14 --------- Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com> Co-authored-by: François Mockers <francois.mockers@vleue.com>	2024-05-08 14:26:26 +00:00
Patrick Walton	77ed72bc16	Implement clearcoat per the Filament and the KHR_materials_clearcoat specifications. (#13031) ... Clearcoat is a separate material layer that represents a thin translucent layer of a material. Examples include (from the [Filament spec]) car paint, soda cans, and lacquered wood. This commit implements support for clearcoat following the Filament and Khronos specifications, marking the beginnings of support for multiple PBR layers in Bevy. The [`KHR_materials_clearcoat`] specification describes the clearcoat support in glTF. In Blender, applying a clearcoat to the Principled BSDF node causes the clearcoat settings to be exported via this extension. As of this commit, Bevy parses and reads the extension data when present in glTF. Note that the `gltf` crate has no support for `KHR_materials_clearcoat`; this patch therefore implements the JSON semantics manually. Clearcoat is integrated with `StandardMaterial`, but the code is behind a series of `#ifdef`s that only activate when clearcoat is present. Additionally, the `pbr_feature_layer_material_textures` Cargo feature must be active in order to enable support for clearcoat factor maps, clearcoat roughness maps, and clearcoat normal maps. This approach mirrors the same pattern used by the existing transmission feature and exists to avoid running out of texture bindings on platforms like WebGL and WebGPU. Note that constant clearcoat factors and roughness values *are* supported in the browser; only the relatively-less-common maps are disabled on those platforms. This patch refactors the lighting code in `StandardMaterial` significantly in order to better support multiple layers in a natural way. That code was due for a refactor in any case, so this is a nice improvement. A new demo, `clearcoat`, has been added. It's based on [the corresponding three.js demo], but all the assets (aside from the skybox and environment map) are my original work. [Filament spec]: https://google.github.io/filament/Filament.html#materialsystem/clearcoatmodel [`KHR_materials_clearcoat`]: https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_clearcoat/README.md [the corresponding three.js demo]: https://threejs.org/examples/webgl_materials_physical_clearcoat.html   ## Changelog ### Added * `StandardMaterial` now supports a clearcoat layer, which represents a thin translucent layer over an underlying material. * The glTF loader now supports the `KHR_materials_clearcoat` extension, representing materials with clearcoat layers. ## Migration Guide * The lighting functions in the `pbr_lighting` WGSL module now have clearcoat parameters, if `STANDARD_MATERIAL_CLEARCOAT` is defined. * The `R` reflection vector parameter has been removed from some lighting functions, as it was unused.	2024-05-05 22:57:05 +00:00
Vitaliy Sapronenko	088960f597	Example with repeated texture (#13176) ... # Objective Fixes #11136 . Fixes https://github.com/bevyengine/bevy/pull/11161. ## Solution - Set image sampler with repeated mode for u and v - set uv_transform of StandardMaterial to resizing params ## Testing Got this view on example run 	2024-05-05 17:29:26 +00:00
Gino Valente	40837501b4	examples: Add Dynamic Types reflection example (#13220) ... # Objective Dynamic types can be tricky to understand and work with in bevy_reflect. There should be an example that shows what they are and how they're used. ## Solution Add a `Dynamic Types` reflection example. I'm planning to go through the reflection examples, adding new ones and updating old ones. And I think this walkthrough style tends to work best. Due to the amount of text and associated explanation, it might fit better in a dedicated reflection chapter of the WIP Bevy Book. However, I think it might be valuable to have some public-facing tutorials for these concepts. Let me know if there any thoughts or critiques with the example— both in content and this overall structure! ## Testing To test these changes, you can run the example locally: ``` cargo run --example dynamic_types ``` --- ## Changelog - Add `Dynamic Types` reflection example	2024-05-03 23:34:53 +00:00
Bram Buurlage	d390420093	Implement Auto Exposure plugin (#12792) ... # Objective - Add auto exposure/eye adaptation to the bevy render pipeline. - Support features that users might expect from other engines: - Metering masks - Compensation curves - Smooth exposure transitions This PR is based on an implementation I already built for a personal project before https://github.com/bevyengine/bevy/pull/8809 was submitted, so I wasn't able to adopt that PR in the proper way. I've still drawn inspiration from it, so @fintelia should be credited as well. ## Solution An auto exposure compute shader builds a 64 bin histogram of the scene's luminance, and then adjusts the exposure based on that histogram. Using a histogram allows the system to ignore outliers like shadows and specular highlights, and it allows to give more weight to certain areas based on a mask. --- ## Changelog - Added: AutoExposure plugin that allows to adjust a camera's exposure based on it's scene's luminance. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2024-05-03 17:45:17 +00:00
Patrick Walton	31835ff76d	Implement visibility ranges, also known as hierarchical levels of detail (HLODs). (#12916) ... Implement visibility ranges, also known as hierarchical levels of detail (HLODs). This commit introduces a new component, `VisibilityRange`, which allows developers to specify camera distances in which meshes are to be shown and hidden. Hiding meshes happens early in the rendering pipeline, so this feature can be used for level of detail optimization. Additionally, this feature is properly evaluated per-view, so different views can show different levels of detail. This feature differs from proper mesh LODs, which can be implemented later. Engines generally implement true mesh LODs later in the pipeline; they're typically more efficient than HLODs with GPU-driven rendering. However, mesh LODs are more limited than HLODs, because they require the lower levels of detail to be meshes with the same vertex layout and shader (and perhaps the same material) as the original mesh. Games often want to use objects other than meshes to replace distant models, such as *octahedral imposters* or *billboard imposters*. The reason why the feature is called *hierarchical level of detail* is that HLODs can replace multiple meshes with a single mesh when the camera is far away. This can be useful for reducing drawcall count. Note that `VisibilityRange` doesn't automatically propagate down to children; it must be placed on every mesh. Crossfading between different levels of detail is supported, using the standard 4x4 ordered dithering pattern from [1]. The shader code to compute the dithering patterns should be well-optimized. The dithering code is only active when visibility ranges are in use for the mesh in question, so that we don't lose early Z. Cascaded shadow maps show the HLOD level of the view they're associated with. Point light and spot light shadow maps, which have no CSMs, display all HLOD levels that are visible in any view. To support this efficiently and avoid doing visibility checks multiple times, we precalculate all visible HLOD levels for each entity with a `VisibilityRange` during the `check_visibility_range` system. A new example, `visibility_range`, has been added to the tree, as well as a new low-poly version of the flight helmet model to go with it. It demonstrates use of the visibility range feature to provide levels of detail. [1]: https://en.wikipedia.org/wiki/Ordered_dithering#Threshold_map [^1]: Unreal doesn't have a feature that exactly corresponds to visibility ranges, but Unreal's HLOD system serves roughly the same purpose. ## Changelog ### Added * A new `VisibilityRange` component is available to conditionally enable entity visibility at camera distances, with optional crossfade support. This can be used to implement different levels of detail (LODs). ## Screenshots High-poly model:  Low-poly model up close:  Crossfading between the two:  --------- Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2024-05-03 00:11:35 +00:00
Lee-Orr	b8832dc862	Computed State & Sub States (#11426) ... ## Summary/Description This PR extends states to allow support for a wider variety of state types and patterns, by providing 3 distinct types of state: - Standard [`States`] can only be changed by manually setting the [`NextState<S>`] resource. These states are the baseline on which the other state types are built, and can be used on their own for many simple patterns. See the [state example](https://github.com/bevyengine/bevy/blob/latest/examples/ecs/state.rs) for a simple use case - these are the states that existed so far in Bevy. - [`SubStates`] are children of other states - they can be changed manually using [`NextState<S>`], but are removed from the [`World`] if the source states aren't in the right state. See the [sub_states example](https://github.com/lee-orr/bevy/blob/derived_state/examples/ecs/sub_states.rs) for a simple use case based on the derive macro, or read the trait docs for more complex scenarios. - [`ComputedStates`] are fully derived from other states - they provide a [`compute`](ComputedStates::compute) method that takes in the source states and returns their derived value. They are particularly useful for situations where a simplified view of the source states is necessary - such as having an `InAMenu` computed state derived from a source state that defines multiple distinct menus. See the [computed state example](https://github.com/lee-orr/bevy/blob/derived_state/examples/ecs/computed_states.rscomputed_states.rs) to see a sampling of uses for these states. # Objective This PR is another attempt at allowing Bevy to better handle complex state objects in a manner that doesn't rely on strict equality. While my previous attempts (https://github.com/bevyengine/bevy/pull/10088 and https://github.com/bevyengine/bevy/pull/9957) relied on complex matching capacities at the point of adding a system to application, this one instead relies on deterministically deriving simple states from more complex ones. As a result, it does not require any special macros, nor does it change any other interactions with the state system once you define and add your derived state. It also maintains a degree of distinction between `State` and just normal application state - your derivations have to end up being discreet pre-determined values, meaning there is less of a risk/temptation to place a significant amount of logic and data within a given state. ### Addition - Sub States closes #9942 After some conversation with Maintainers & SMEs, a significant concern was that people might attempt to use this feature as if it were sub-states, and find themselves unable to use it appropriately. Since `ComputedState` is mainly a state matching feature, while `SubStates` are more of a state mutation related feature - but one that is easy to add with the help of the machinery introduced by `ComputedState`, it was added here as well. The relevant discussion is here: https://discord.com/channels/691052431525675048/1200556329803186316 ## Solution closes #11358 The solution is to create a new type of state - one implementing `ComputedStates` - which is deterministically tied to one or more other states. Implementors write a function to transform the source states into the computed state, and it gets triggered whenever one of the source states changes. In addition, we added the `FreelyMutableState` trait , which is implemented as part of the derive macro for `States`. This allows us to limit use of `NextState<S>` to states that are actually mutable, preventing mis-use of `ComputedStates`. --- ## Changelog - Added `ComputedStates` trait - Added `FreelyMutableState` trait - Converted `NextState` resource to an Enum, with `Unchanged` and `Pending` - Added `App::add_computed_state::<S: ComputedStates>()`, to allow for easily adding derived states to an App. - Moved the `StateTransition` schedule label from `bevy_app` to `bevy_ecs` - but maintained the export in `bevy_app` for continuity. - Modified the process for updating states. Instead of just having an `apply_state_transition` system that can be added anywhere, we now have a multi-stage process that has to run within the `StateTransition` label. First, all the state changes are calculated - manual transitions rely on `apply_state_transition`, while computed transitions run their computation process before both call `internal_apply_state_transition` to apply the transition, send out the transition event, trigger dependent states, and record which exit/transition/enter schedules need to occur. Once all the states have been updated, the transition schedules are called - first the exit schedules, then transition schedules and finally enter schedules. - Added `SubStates` trait - Adjusted `apply_state_transition` to be a no-op if the `State<S>` resource doesn't exist ## Migration Guide If the user accessed the NextState resource's value directly or created them from scratch they will need to adjust to use the new enum variants: - if they created a `NextState(Some(S))` - they should now use `NextState::Pending(S)` - if they created a `NextState(None)` -they should now use `NextState::Unchanged` - if they matched on the `NextState` value, they would need to make the adjustments above If the user manually utilized `apply_state_transition`, they should instead use systems that trigger the `StateTransition` schedule. --- ## Future Work There is still some future potential work in the area, but I wanted to keep these potential features and changes separate to keep the scope here contained, and keep the core of it easy to understand and use. However, I do want to note some of these things, both as inspiration to others and an illustration of what this PR could unlock. - `NextState::Remove` - Now that the `State` related mechanisms all utilize options (#11417), it's fairly easy to add support for explicit state removal. And while `ComputedStates` can add and remove themselves, right now `FreelyMutableState`s can't be removed from within the state system. While it existed originally in this PR, it is a different question with a separate scope and usability concerns - so having it as it's own future PR seems like the best approach. This feature currently lives in a separate branch in my fork, and the differences between it and this PR can be seen here: https://github.com/lee-orr/bevy/pull/5 - `NextState::ReEnter` - this would allow you to trigger exit & entry systems for the current state type. We can potentially also add a `NextState::ReEnterRecirsive` to also re-trigger any states that depend on the current one. - More mechanisms for `State` updates - This PR would finally make states that aren't a set of exclusive Enums useful, and with that comes the question of setting state more effectively. Right now, to update a state you either need to fully create the new state, or include the `Res<Option<State<S>>>` resource in your system, clone the state, mutate it, and then use `NextState.set(my_mutated_state)` to make it the pending next state. There are a few other potential methods that could be implemented in future PRs: - Inverse Compute States - these would essentially be compute states that have an additional (manually defined) function that can be used to nudge the source states so that they result in the computed states having a given value. For example, you could use set the `IsPaused` state, and it would attempt to pause or unpause the game by modifying the `AppState` as needed. - Closure-based state modification - this would involve adding a `NextState.modify(f: impl Fn(Option<S> -> Option<S>)` method, and then you can pass in closures or function pointers to adjust the state as needed. - Message-based state modification - this would involve either creating states that can respond to specific messages, similar to Elm or Redux. These could either use the `NextState` mechanism or the Event mechanism. - ~`SubStates` - which are essentially a hybrid of computed and manual states. In the simplest (and most likely) version, they would work by having a computed element that determines whether the state should exist, and if it should has the capacity to add a new version in, but then any changes to it's content would be freely mutated.~ this feature is now part of this PR. See above. - Lastly, since states are getting more complex there might be value in moving them out of `bevy_ecs` and into their own crate, or at least out of the `schedule` module into a `states` module. #11087 As mentioned, all these future work elements are TBD and are explicitly not part of this PR - I just wanted to provide them as potential explorations for the future. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Marcel Champagne <voiceofmarcel@gmail.com> Co-authored-by: MiniaczQ <xnetroidpl@gmail.com>	2024-05-02 19:36:23 +00:00
Patrick Walton	961b24deaf	Implement filmic color grading. (#13121) ... This commit expands Bevy's existing tonemapping feature to a complete set of filmic color grading tools, matching those of engines like Unity, Unreal, and Godot. The following features are supported: * White point adjustment. This is inspired by Unity's implementation of the feature, but simplified and optimized. *Temperature* and *tint* control the adjustments to the *x* and *y* chromaticity values of [CIE 1931]. Following Unity, the adjustments are made relative to the [D65 standard illuminant] in the [LMS color space]. * Hue rotation. This simply converts the RGB value to [HSV], alters the hue, and converts back. * Color correction. This allows the *gamma*, *gain*, and *lift* values to be adjusted according to the standard [ASC CDL combined function]. * Separate color correction for shadows, midtones, and highlights. Blender's source code was used as a reference for the implementation of this. The midtone ranges can be adjusted by the user. To avoid abrupt color changes, a small crossfade is used between the different sections of the image, again following Blender's formulas. A new example, `color_grading`, has been added, offering a GUI to change all the color grading settings. It uses the same test scene as the existing `tonemapping` example, which has been factored out into a shared glTF scene. [CIE 1931]: https://en.wikipedia.org/wiki/CIE_1931_color_space [D65 standard illuminant]: https://en.wikipedia.org/wiki/Standard_illuminant#Illuminant_series_D [LMS color space]: https://en.wikipedia.org/wiki/LMS_color_space [HSV]: https://en.wikipedia.org/wiki/HSL_and_HSV [ASC CDL combined function]: https://en.wikipedia.org/wiki/ASC_CDL#Combined_Function ## Changelog ### Added * Many new filmic color grading options have been added to the `ColorGrading` component. ## Migration Guide * `ColorGrading::gamma` and `ColorGrading::pre_saturation` are now set separately for the `shadows`, `midtones`, and `highlights` sections. You can migrate code with the `ColorGrading::all_sections` and `ColorGrading::all_sections_mut` functions, which access and/or update all sections at once. * `ColorGrading::post_saturation` and `ColorGrading::exposure` are now fields of `ColorGrading::global`. ## Screenshots  	2024-05-02 12:18:59 +00:00
Aevyrie	ade70b3925	Per-Object Motion Blur (#9924) ... https://github.com/bevyengine/bevy/assets/2632925/e046205e-3317-47c3-9959-fc94c529f7e0 # Objective - Adds per-object motion blur to the core 3d pipeline. This is a common effect used in games and other simulations. - Partially resolves #4710 ## Solution - This is a post-process effect that uses the depth and motion vector buffers to estimate per-object motion blur. The implementation is combined from knowledge from multiple papers and articles. The approach itself, and the shader are quite simple. Most of the effort was in wiring up the bevy rendering plumbing, and properly specializing for HDR and MSAA. - To work with MSAA, the MULTISAMPLED_SHADING wgpu capability is required. I've extracted this code from #9000. This is because the prepass buffers are multisampled, and require accessing with `textureLoad` as opposed to the widely compatible `textureSample`. - Added an example to demonstrate the effect of motion blur parameters. ## Future Improvements - While this approach does have limitations, it's one of the most commonly used, and is much better than camera motion blur, which does not consider object velocity. For example, this implementation allows a dolly to track an object, and that object will remain unblurred while the background is blurred. The biggest issue with this implementation is that blur is constrained to the boundaries of objects which results in hard edges. There are solutions to this by either dilating the object or the motion vector buffer, or by taking a different approach such as https://casual-effects.com/research/McGuire2012Blur/index.html - I'm using a noise PRNG function to jitter samples. This could be replaced with a blue noise texture lookup or similar, however after playing with the parameters, it gives quite nice results with 4 samples, and is significantly better than the artifacts generated when not jittering. --- ## Changelog - Added: per-object motion blur. This can be enabled and configured by adding the `MotionBlurBundle` to a camera entity. --------- Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>	2024-04-25 01:16:02 +00:00
Andrew	d59c859a35	new example: sprite animation in response to an event (#12996) ... # Objective - animating a sprite in response to an event is a [common beginner problem](https://www.reddit.com/r/bevy/comments/13xx4v7/sprite_animation_in_bevy/) ## Solution - provide a simple example to show how to animate a sprite in response to an event --------- Co-authored-by: François Mockers <francois.mockers@vleue.com>	2024-04-23 21:44:03 +00:00
Remi Godin	10af274d4e	Created loading screen example (#12863) ... Allows the user to select a scene to load, then a loading screen is shown until all assets are loaded, and pipelines compiled. # Objective - Fixes #12654 ## Solution - Add desired assets to be monitored to a list. - While there are assets that are not fully loaded, show a loading screen. - Once all assets are loaded, and pipelines compiled, show the scene that was loaded.	2024-04-09 12:50:19 +00:00
Noah Emke	c0aa5170bc	Add example for using .meta files (#12882) ... # Objective - Fixes #12411 - Add an example demonstrating the usage of asset meta files. ## Solution - Add a new example displaying a basic scene of three pixelated images - Apply a .meta file to one of the assets setting Nearest filtering - Use AssetServer::load_with_settings on the last one as another way to achieve the same effect - The result is one blurry image and two crisp images demonstrating a common scenario in which changing settings are useful.	2024-04-08 17:10:56 +00:00
IceSentry	08b41878d7	Add gpu readback example (#12877) ... # Objective - It's pretty common for users to want to read data back from the gpu and into the main world ## Solution - Add a simple example that shows how to read data back from the gpu and send it to the main world using a channel. - The example is largely based on this wgpu example but adapted to bevy - fb305b85f6/examples/src/repeated_compute/mod.rs --------- Co-authored-by: stormy <120167078+stowmyy@users.noreply.github.com> Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>	2024-04-08 17:08:20 +00:00
Jonathan	eb82ec047e	Remove stepping from default features (#12847) ... # Objective Fix #11931 ## Solution - Make stepping a non-default feature - Adjust documentation and examples - In particular, make the breakout example not show the stepping prompt if compiled without the feature (shows a log message instead) --- ## Changelog - Removed `bevy_debug_stepping` from default features ## Migration Guide The system-by-system stepping feature is now disabled by default; to use it, enable the `bevy_debug_stepping` feature explicitly: ```toml [dependencies] bevy = { version = "0.14", features = ["bevy_debug_stepping"] } ``` Code using [`Stepping`](https://docs.rs/bevy/latest/bevy/ecs/schedule/struct.Stepping.html) will still compile with the feature disabled, but will print a runtime error message to the console if the application attempts to enable stepping. --------- Co-authored-by: James Liu <contact@jamessliu.com> Co-authored-by: François Mockers <francois.mockers@vleue.com>	2024-04-03 19:16:02 +00:00
François Mockers	93fd02e8ea	remove DeterministicRenderingConfig (#12811) ... # Objective - Since #12453, `DeterministicRenderingConfig` doesn't do anything ## Solution - Remove it --- ## Migration Guide - Removed `DeterministicRenderingConfig`. There shouldn't be any z fighting anymore in the rendering even without setting `stable_sort_z_fighting`	2024-04-01 09:32:47 +00:00
Remi Godin	df76fd4a1b	Programmed soundtrack example (#12774) ... Created soundtrack example, fade-in and fade-out features, added new assets, and updated credits. # Objective - Fixes #12651 ## Solution - Created a resource to hold the track list. - The audio assets are then loaded by the asset server and added to the track list. - Once the game is in a specific state, an `AudioBundle` is spawned and plays the appropriate track. - The audio volume starts at zero and is then incremented gradually until it reaches full volume. - Once the game state changes, the current track fades out, and a new one fades in at the same time, offering a relatively seamless transition. - Once a track is completely faded out, it is despawned from the app. - Game state changes are simulated through a `Timer` for simplicity. - Track change system is only run if there is a change in the `GameState` resource. - All tracks are used according to their respective licenses. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2024-03-29 20:32:30 +00:00
Martin Svanberg	fee824413f	Support wireframes for 2D meshes (#12135) ... # Objective Wireframes are currently supported for 3D meshes using the `WireframePlugin` in `bevy_pbr`. This PR adds the same functionality for 2D meshes. Closes #5881. ## Solution Since there's no easy way to share material implementations between 2D, 3D, and UI, this is mostly a straight copy and rename from the original plugin into `bevy_sprite`. <img width="1392" alt="image" src="https://github.com/bevyengine/bevy/assets/3961616/7aca156f-448a-4c7e-89b8-0a72c5919769"> --- ## Changelog - Added `Wireframe2dPlugin` and related types to support 2D wireframes. - Added an example to demonstrate how to use 2D wireframes --------- Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>	2024-03-29 18:34:04 +00:00
JMS55	4f20faaa43	Meshlet rendering (initial feature) (#10164) ... # Objective - Implements a more efficient, GPU-driven (https://github.com/bevyengine/bevy/issues/1342) rendering pipeline based on meshlets. - Meshes are split into small clusters of triangles called meshlets, each of which acts as a mini index buffer into the larger mesh data. Meshlets can be compressed, streamed, culled, and batched much more efficiently than monolithic meshes.   # Misc * Future work: https://github.com/bevyengine/bevy/issues/11518 * Nanite reference: https://advances.realtimerendering.com/s2021/Karis_Nanite_SIGGRAPH_Advances_2021_final.pdf Two pass occlusion culling explained very well: https://medium.com/@mil_kru/two-pass-occlusion-culling-4100edcad501 --------- Co-authored-by: Ricky Taylor <rickytaylor26@gmail.com> Co-authored-by: vero <email@atlasdostal.com> Co-authored-by: François <mockersf@gmail.com> Co-authored-by: atlas dostal <rodol@rivalrebels.com>	2024-03-25 19:08:27 +00:00
Lynn	887bc27a6f	Animatable for colors (#12614) ... # Objective - Fixes #12202 ## Solution - Implements `Animatable` for all color types implementing arithmetic operations. - the colors returned by `Animatable`s methods are already clamped. - Adds a `color_animation.rs` example. - Implements the `*Assign` operators for color types that already had the corresponding operators. This is just a 'nice to have' and I am happy to remove this if it's not wanted. --- ## Changelog - `bevy_animation` now depends on `bevy_color`. - `LinearRgba`, `Laba`, `Oklaba` and `Xyza` implement `Animatable`. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Zachary Harrold <zac@harrold.com.au>	2024-03-22 00:06:24 +00:00
Antony	e7a31d000e	Add border radius to UI nodes (adopted) (#12500) ... # Objective Implements border radius for UI nodes. Adopted from #8973, but excludes shadows. ## Solution - Add a component `BorderRadius` which contains a radius value for each corner of the UI node. - Use a fragment shader to generate the rounded corners using a signed distance function. <img width="50%" src="https://github.com/bevyengine/bevy/assets/26204416/16b2ba95-e274-4ce7-adb2-34cc41a776a5"></img> ## Changelog - `BorderRadius`: New component that holds the border radius values. - `NodeBundle` & `ButtonBundle`: Added a `border_radius: BorderRadius` field. - `extract_uinode_borders`: Stripped down, most of the work is done in the shader now. Borders are no longer assembled from multiple rects, instead the shader uses a signed distance function to draw the border. - `UiVertex`: Added size, border and radius fields. - `UiPipeline`: Added three vertex attributes to the vertex buffer layout, to accept the UI node's size, border thickness and border radius. - Examples: Added rounded corners to the UI element in the `button` example, and a `rounded_borders` example. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Zachary Harrold <zac@harrold.com.au> Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>	2024-03-19 22:44:00 +00:00
Matty	325f0fd982	Alignment API for Transforms (#12187) ... # Objective - Closes #11793 - Introduces a general API for aligning local coordinates of Transforms with given vectors. ## Solution - We introduce `Transform::align`, which allows a rotation to be specified by four pieces of alignment data, as explained by the documentation: ````rust /// Rotates this [`Transform`] so that the `main_axis` vector, reinterpreted in local coordinates, points /// in the given `main_direction`, while `secondary_axis` points towards `secondary_direction`. /// /// For example, if a spaceship model has its nose pointing in the X-direction in its own local coordinates /// and its dorsal fin pointing in the Y-direction, then `align(Vec3::X, v, Vec3::Y, w)` will make the spaceship's /// nose point in the direction of `v`, while the dorsal fin does its best to point in the direction `w`. /// /// More precisely, the [`Transform::rotation`] produced will be such that: /// * applying it to `main_axis` results in `main_direction` /// * applying it to `secondary_axis` produces a vector that lies in the half-plane generated by `main_direction` and /// `secondary_direction` (with positive contribution by `secondary_direction`) /// /// [`Transform::look_to`] is recovered, for instance, when `main_axis` is `Vec3::NEG_Z` (the [`Transform::forward`] /// direction in the default orientation) and `secondary_axis` is `Vec3::Y` (the [`Transform::up`] direction in the default /// orientation). (Failure cases may differ somewhat.) /// /// In some cases a rotation cannot be constructed. Another axis will be picked in those cases: /// * if `main_axis` or `main_direction` is zero, `Vec3::X` takes its place /// * if `secondary_axis` or `secondary_direction` is zero, `Vec3::Y` takes its place /// * if `main_axis` is parallel with `secondary_axis` or `main_direction` is parallel with `secondary_direction`, /// a rotation is constructed which takes `main_axis` to `main_direction` along a great circle, ignoring the secondary /// counterparts /// /// Example /// ``` /// # use bevy_math::{Vec3, Quat}; /// # use bevy_transform::components::Transform; /// let mut t1 = Transform::IDENTITY; /// let mut t2 = Transform::IDENTITY; /// t1.align(Vec3::ZERO, Vec3::Z, Vec3::ZERO, Vec3::X); /// t2.align(Vec3::X, Vec3::Z, Vec3::Y, Vec3::X); /// assert_eq!(t1.rotation, t2.rotation); /// /// t1.align(Vec3::X, Vec3::Z, Vec3::X, Vec3::Y); /// assert_eq!(t1.rotation, Quat::from_rotation_arc(Vec3::X, Vec3::Z)); /// ``` pub fn align( &mut self, main_axis: Vec3, main_direction: Vec3, secondary_axis: Vec3, secondary_direction: Vec3, ) { //... } ```` - We introduce `Transform::aligned_by`, the returning-Self version of `align`: ````rust pub fn aligned_by( mut self, main_axis: Vec3, main_direction: Vec3, secondary_axis: Vec3, secondary_direction: Vec3, ) -> Self { //... } ```` - We introduce an example (examples/transforms/align.rs) that shows the usage of this API. It is likely to be mathier than most other `Transform` APIs, so when run, the example demonstrates what the API does in space: <img width="1440" alt="Screenshot 2024-03-12 at 11 01 19 AM" src="https://github.com/bevyengine/bevy/assets/2975848/884b3cc3-cbd9-48ae-8f8c-49a677c59dfe"> --- ## Changelog - Added methods `align`, `aligned_by` to `Transform`. - Added transforms/align.rs to examples. --- ## Discussion ### On the form of `align` The original issue linked above suggests an API similar to that of the existing `Transform::look_to` method: ````rust pub fn align_to(&mut self, direction: Vec3, up: Vec3) { //... } ```` Not allowing an input axis of some sort that is to be aligned with `direction` would not really solve the problem in the issue, since the user could easily be in a scenario where they have to compose with another rotation on their own (undesirable). This leads to something like: ````rust pub fn align_to(&mut self, axis: Vec3, direction: Vec3, up: Vec3) { //... } ```` However, this still has two problems: - If the vector that the user wants to align is parallel to the Y-axis, then the API basically does not work (we cannot fully specify a rotation) - More generally, it does not give the user the freedom to specify which direction is to be treated as the local "up" direction, so it fails as a general alignment API Specifying both leads us to the present situation, with two local axis inputs (`main_axis` and `secondary_axis`) and two target directions (`main_direction` and `secondary_direction`). This might seem a little cumbersome for general use, but for the time being I stand by the decision not to expand further without prompting from users. I'll expand on this below. ### Additional APIs? Presently, this PR introduces only `align` and `aligned_by`. Other potentially useful bundles of API surface arrange into a few different categories: 1. Inferring direction from position, a la `Transform::look_at`, which might look something like this: ````rust pub fn align_at(&mut self, axis: Vec3, target: Vec3, up: Vec3) { self.align(axis, target - self.translation, Vec3::Y, up); } ```` (This is simple but still runs into issues when the user wants to point the local Y-axis somewhere.) 2. Filling in some data for the user for common use-cases; e.g.: ````rust pub fn align_x(&mut self, direction: Vec3, up: Vec3) { self.align(Vec3::X, direction, Vec3::Y, up); } ```` (Here, use of the `up` vector doesn't lose any generality, but it might be less convenient to specify than something else. This does naturally leave open the question of what `align_y` would look like if we provided it.) Morally speaking, I do think that the `up` business is more pertinent when the intention is to work with cameras, which the `look_at` and `look_to` APIs seem to cover pretty well. If that's the case, then I'm not sure what the ideal shape for these API functions would be, since it seems like a lot of input would have to be baked into the function definitions. For some cases, this might not be the end of the world: ````rust pub fn align_x_z(&mut self, direction: Vec3, weak_direction: Vec3) { self.align(Vec3::X, direction, Vec3::Z, weak_direction); } ```` (However, this is not symmetrical in x and z, so you'd still need six API functions just to support the standard positive coordinate axes, and if you support negative axes then things really start to balloon.) The reasons that these are not actually produced in this PR are as follows: 1. Without prompting from actual users in the wild, it is unknown to me whether these additional APIs would actually see a lot of use. Extending these to our users in the future would be trivial if we see there is a demand for something specific from the above-mentioned categories. 2. As discussed above, there are so many permutations of these that could be provided that trying to do so looks like it risks unduly ballooning the API surface for this feature. 3. Finally, and most importantly, creating these helper functions in user-space is trivial, since they all just involve specializing `align` to particular inputs; e.g.: ````rust fn align_ship(ship_transform: &mut Transform, nose_direction: Vec3, dorsal_direction: Vec3) { ship_transform.align(Ship::NOSE, nose_direction, Ship::DORSAL, dorsal_direction); } ```` With that in mind, I would prefer instead to focus on making the documentation and examples for a thin API as clear as possible, so that users can get a grip on the tool and specialize it for their own needs when they feel the desire to do so. ### `Dir3`? As in the case of `Transform::look_to` and `Transform::look_at`, the inputs to this function are, morally speaking, *directions* rather than vectors (actually, if we're being pedantic, the input is *really really* a pair of orthonormal frames), so it's worth asking whether we should really be using `Dir3` as inputs instead of `Vec3`. I opted for `Vec3` for the following reasons: 1. Specifying a `Dir3` in user-space is just more annoying than providing a `Vec3`. Even in the most basic cases (e.g. providing a vector literal), you still have to do error handling or call an unsafe unwrap in your function invocations. 2. The existing API mentioned above uses `Vec3`, so we are just adhering to the same thing. Of course, the use of `Vec3` has its own downsides; it can be argued that the replacement of zero-vectors with fixed ones (which we do in `Transform::align` as well as `Transform::look_to`) more-or-less amounts to failing silently. ### Future steps The question of additional APIs was addressed above. For me, the main thing here to handle more immediately is actually just upstreaming this API (or something similar and slightly mathier) to `glam::Quat`. The reason that this would be desirable for users is that this API currently only works with `Transform`s even though all it's actually doing is specifying a rotation. Upstreaming to `glam::Quat`, properly done, could buy a lot basically for free, since a number of `Transform` methods take a rotation as an input. Using these together would require a little bit of mathematical savvy, but it opens up some good things (e.g. `Transform::rotate_around`).	2024-03-14 14:55:55 +00:00
Mateusz Wachowiak	2d29954034	Fps overlay (#12382) ... # Objective - Part of #12351 - Add fps overlay ## Solution - Create `FpsOverlayPlugin` - Allow for configuration through resource `FpsOverlayConfig` - Allow for configuration during runtime ### Preview on default settings  --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2024-03-11 19:26:14 +00:00
Patrick Walton	dfdf2b9ea4	Implement the AnimationGraph, allowing for multiple animations to be blended together. (#11989) ... This is an implementation of RFC #51: https://github.com/bevyengine/rfcs/blob/main/rfcs/51-animation-composition.md Note that the implementation strategy is different from the one outlined in that RFC, because two-phase animation has now landed. # Objective Bevy needs animation blending. The RFC for this is [RFC 51]. ## Solution This is an implementation of the RFC. Note that the implementation strategy is different from the one outlined there, because two-phase animation has now landed. This is just a draft to get the conversation started. Currently we're missing a few things: - [x] A fully-fleshed-out mechanism for transitions - [x] A serialization format for `AnimationGraph`s - [x] Examples are broken, other than `animated_fox` - [x] Documentation --- ## Changelog ### Added * The `AnimationPlayer` has been reworked to support blending multiple animations together through an `AnimationGraph`, and as such will no longer function unless a `Handle<AnimationGraph>` has been added to the entity containing the player. See [RFC 51] for more details. * Transition functionality has moved from the `AnimationPlayer` to a new component, `AnimationTransitions`, which works in tandem with the `AnimationGraph`. ## Migration Guide * `AnimationPlayer`s can no longer play animations by themselves and need to be paired with a `Handle<AnimationGraph>`. Code that was using `AnimationPlayer` to play animations will need to create an `AnimationGraph` asset first, add a node for the clip (or clips) you want to play, and then supply the index of that node to the `AnimationPlayer`'s `play` method. * The `AnimationPlayer::play_with_transition()` method has been removed and replaced with the `AnimationTransitions` component. If you were previously using `AnimationPlayer::play_with_transition()`, add all animations that you were playing to the `AnimationGraph`, and create an `AnimationTransitions` component to manage the blending between them. [RFC 51]: https://github.com/bevyengine/rfcs/blob/main/rfcs/51-animation-composition.md --------- Co-authored-by: Rob Parrett <robparrett@gmail.com>	2024-03-07 20:22:42 +00:00
Turki Al-Marri	6f2ecdf822	We must have googly eyes (new Game example) (#12331) ... # Objective - We must have googly eyes. - Also it would be nice if there was an example of a desk toy application (like the old NEKO.EXE). ## Solution - Created an example with googly eyed Bevy logo under examples/games/desktoy.rs. --- ## Changelog - Added "Desk Toy" game example showcasing window transparency and hit test. --------- Co-authored-by: Rob Parrett <robparrett@gmail.com>	2024-03-06 22:21:41 +00:00
NiseVoid	e3b318f599	Add extra_asset_source example (#11824) ... # Objective - Make it easier to figure out how to add asset sources ## Solution - Add an example that adds an asset source, it functions almost identical to the embedded_asset example - Move the file from the embedded_asset example into a `files/` folder	2024-03-06 16:00:03 +00:00
Félix Lescaudey de Maneville	fc202f2e3d	Slicing support for texture atlas (#12059) ... # Objective Follow up to #11600 and #10588 https://github.com/bevyengine/bevy/issues/11944 made clear that some people want to use slicing with texture atlases ## Changelog * Added support for `TextureAtlas` slicing and tiling. `SpriteSheetBundle` and `AtlasImageBundle` can now use `ImageScaleMode` * Added new `ui_texture_atlas_slice` example using a texture sheet <img width="798" alt="Screenshot 2024-02-23 at 11 58 35" src="https://github.com/bevyengine/bevy/assets/26703856/47a8b764-127c-4a06-893f-181703777501"> --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>	2024-03-05 16:05:39 +00:00
Matty	4673fb3e57	Example for axes gizmos (#12299) ... # Objective - Follow-up to #12211 - Introduces an example project that demonstrates the implementation and behavior of `Gizmos::axes` for an entity with a `Transform` component. ## Solution In order to demonstrate how `Gizmo::axes` can be used and behaves in practice, we introduce an example of a simple scene containing a pair of cuboids locked in a grotesque, inscrutable dance: the two are repeatedly given random `Transform`s which they interpolate to, showing how the axes move with objects as they translate, rotate, and scale. <img width="1023" alt="Screenshot 2024-03-04 at 1 16 33 PM" src="https://github.com/bevyengine/bevy/assets/2975848/c1ff4794-6722-491c-8522-f59801645139"> On the implementation side, we demonstrate how to draw axes for entities, automatically sizing them according to their bounding boxes (so that the axes will be visible): ````rust fn draw_axes(mut gizmos: Gizmos, query: Query<(&Transform, &Aabb), With<ShowAxes>>) { for (&transform, &aabb) in &query { let length = aabb.half_extents.length(); gizmos.axes(transform, length); } } ```` --- ## Changelog - Created examples/gizmos/axes.rs. - Added 'axes' example to Cargo.toml.	2024-03-04 19:30:39 +00:00
Doonv	14c20a6c9c	Add access to App within LogPlugin::update_subscriber (#12045) ... # Objective In my library, [`bevy_dev_console`](https://github.com/doonv/bevy_dev_console) I need access to `App` within `LogPlugin::update_subscriber` in order to communicate with the `App` from my custom `Layer`. ## Solution Give access to `App`. --- ## Changelog - Added access to `App` within `LogPlugin::update_subscriber` ## Migration Guide `LogPlugin::update_subscriber` now has a `&mut App` parameter. If you don't need access to `App`, you can ignore the parameter with an underscore (`_`). ```diff,rust - fn update_subscriber(subscriber: BoxedSubscriber) -> BoxedSubscriber { + fn update_subscriber(_: &mut App, subscriber: BoxedSubscriber) -> BoxedSubscriber { Box::new(subscriber.with(CustomLayer)) } ```	2024-03-04 00:01:05 +00:00
Kanabenki	de0ed293fa	Add basic light gizmos (#12228) ... # Objective - Part of #9400. - Add light gizmos for `SpotLight`, `PointLight` and `DirectionalLight`. ## Solution - Add a `ShowLightGizmo` and its related gizmo group and plugin, that shows a gizmo for all lights of an entities when inserted on it. Light display can also be toggled globally through the gizmo config in the same way it can already be done for `Aabb`s. - Add distinct segment setters for height and base one `Cone3dBuilder`. This allow having a properly rounded base without too much edges along the height. The doc comments explain how to ensure height and base connect when setting different values. Gizmo for the three light types without radius with the depth bias set to -1:  With Radius:  Possible future improvements: - Add a billboarded sprite with a distinct sprite for each light type. - Display the intensity of the light somehow (no idea how to represent that apart from some text). --- ## Changelog ### Added - The new `ShowLightGizmo`, part of the `LightGizmoPlugin` and configurable globally with `LightGizmoConfigGroup`, allows drawing gizmo for `PointLight`, `SpotLight` and `DirectionalLight`. The gizmos color behavior can be controlled with the `LightGizmoColor` member of `ShowLightGizmo` and `LightGizmoConfigGroup`. - The cone gizmo builder (`Cone3dBuilder`) now allows setting a differing number of segments for the base and height. --------- Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>	2024-03-03 18:50:46 +00:00
Kaur Kuut	165c360070	Update wgpu to v0.19.3 and unpin web-sys. (#12247) ... # Objective This PR unpins `web-sys` so that unrelated projects that have `bevy_render` in their workspace can finally update their `web-sys`. More details in and fixes #12246. ## Solution * Update `wgpu` from 0.19.1 to 0.19.3. * Remove the `web-sys` pin. * Update docs and wasm helper to remove the now-stale `--cfg=web_sys_unstable_apis` Rust flag. --- ## Changelog Updated `wgpu` to v0.19.3 and removed `web-sys` pin.	2024-03-02 00:44:51 +00:00
James O'Brien	94ff123d7f	Component Lifecycle Hooks and a Deferred World (#10756) ... # Objective - Provide a reliable and performant mechanism to allows users to keep components synchronized with external sources: closing/opening sockets, updating indexes, debugging etc. - Implement a generic mechanism to provide mutable access to the world without allowing structural changes; this will not only be used here but is a foundational piece for observers, which are key for a performant implementation of relations. ## Solution - Implement a new type `DeferredWorld` (naming is not important, `StaticWorld` is also suitable) that wraps a world pointer and prevents user code from making any structural changes to the ECS; spawning entities, creating components, initializing resources etc. - Add component lifecycle hooks `on_add`, `on_insert` and `on_remove` that can be assigned callbacks in user code. --- ## Changelog - Add new `DeferredWorld` type. - Add new world methods: `register_component::<T>` and `register_component_with_descriptor`. These differ from `init_component` in that they provide mutable access to the created `ComponentInfo` but will panic if the component is already in any archetypes. These restrictions serve two purposes: 1. Prevent users from defining hooks for components that may already have associated hooks provided in another plugin. (a use case better served by observers) 2. Ensure that when an `Archetype` is created it gets the appropriate flags to early-out when triggering hooks. - Add methods to `ComponentInfo`: `on_add`, `on_insert` and `on_remove` to be used to register hooks of the form `fn(DeferredWorld, Entity, ComponentId)` - Modify `BundleInserter`, `BundleSpawner` and `EntityWorldMut` to trigger component hooks when appropriate. - Add bit flags to `Archetype` indicating whether or not any contained components have each type of hook, this can be expanded for other flags as needed. - Add `component_hooks` example to illustrate usage. Try it out! It's fun to mash keys. ## Safety The changes to component insertion, removal and deletion involve a large amount of unsafe code and it's fair for that to raise some concern. I have attempted to document it as clearly as possible and have confirmed that all the hooks examples are accepted by `cargo miri` as not causing any undefined behavior. The largest issue is in ensuring there are no outstanding references when passing a `DeferredWorld` to the hooks which requires some use of raw pointers (as was already happening to some degree in those places) and I have taken some time to ensure that is the case but feel free to let me know if I've missed anything. ## Performance These changes come with a small but measurable performance cost of between 1-5% on `add_remove` benchmarks and between 1-3% on `insert` benchmarks. One consideration to be made is the existence of the current `RemovedComponents` which is on average more costly than the addition of `on_remove` hooks due to the early-out, however hooks doesn't completely remove the need for `RemovedComponents` as there is a chance you want to respond to the removal of a component that already has an `on_remove` hook defined in another plugin, so I have not removed it here. I do intend to deprecate it with the introduction of observers in a follow up PR. ## Discussion Questions - Currently `DeferredWorld` implements `Deref` to `&World` which makes sense conceptually, however it does cause some issues with rust-analyzer providing autocomplete for `&mut World` references which is annoying. There are alternative implementations that may address this but involve more code churn so I have attempted them here. The other alternative is to not implement `Deref` at all but that leads to a large amount of API duplication. - `DeferredWorld`, `StaticWorld`, something else? - In adding support for hooks to `EntityWorldMut` I encountered some unfortunate difficulties with my desired API. If commands are flushed after each call i.e. `world.spawn() // flush commands .insert(A) // flush commands` the entity may be despawned while `EntityWorldMut` still exists which is invalid. An alternative was then to add `self.world.flush_commands()` to the drop implementation for `EntityWorldMut` but that runs into other problems for implementing functions like `into_unsafe_entity_cell`. For now I have implemented a `.flush()` which will flush the commands and consume `EntityWorldMut` or users can manually run `world.flush_commands()` after using `EntityWorldMut`. - In order to allowing querying on a deferred world we need implementations of `WorldQuery` to not break our guarantees of no structural changes through their `UnsafeWorldCell`. All our implementations do this, but there isn't currently any safety documentation specifying what is or isn't allowed for an implementation, just for the caller, (they also shouldn't be aliasing components they didn't specify access for etc.) is that something we should start doing? (see 10752) Please check out the example `component_hooks` or the tests in `bundle.rs` for usage examples. I will continue to expand this description as I go. See #10839 for a more ergonomic API built on top of this one that isn't subject to the same restrictions and supports `SystemParam` dependency injection.	2024-03-01 14:59:22 +00:00
Joshua Schlichting	a463d0c637	Fixed iOS documentation typo for xcrun command (#12112) ... ``` $ xcrun simctl devices list Unrecognized subcommand: devices usage: simctl [--set <path>] [--profiles <path>] <subcommand> ... simctl help [subcommand] Command line utility to control the Simulator ``` # Objective - The `examples/README.md` contains an invalid example command for listing iOS devices using `xcrun`. ## Solution - Update example command to omit the current invalid subcommand "`devices`".	2024-02-26 04:59:19 +00:00
Evgeny Kropotin	d3e839a8e5	Move gizmos examples in the separate folder (#11916) ... # Objective Move Gizmo examples into the separate directory Fixes #11899 --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>	2024-02-21 20:16:25 +00:00
Robert Walter	b446374392	Dedicated primitive example (#11697) ... I just implemented this to record a video for the new blog post, but I figured it would also make a good dedicated example. This also allows us to remove a lot of code from the 2d/3d gizmo examples since it supersedes this portion of code. Depends on: https://github.com/bevyengine/bevy/pull/11699	2024-02-14 16:55:44 +00:00
Félix Lescaudey de Maneville	ab16f5ed6a	UI Texture 9 slice (#11600) ... > Follow up to #10588 > Closes #11749 (Supersedes #11756) Enable Texture slicing for the following UI nodes: - `ImageBundle` - `ButtonBundle` <img width="739" alt="Screenshot 2024-01-29 at 13 57 43" src="https://github.com/bevyengine/bevy/assets/26703856/37675681-74eb-4689-ab42-024310cf3134"> I also added a collection of `fantazy-ui-borders` from [Kenney's](www.kenney.nl) assets, with the appropriate license (CC). If it's a problem I can use the same textures as the `sprite_slice` example # Work done Added the `ImageScaleMode` component to the targetted bundles, most of the logic is directly reused from `bevy_sprite`. The only additional internal component is the UI specific `ComputedSlices`, which does the same thing as its spritee equivalent but adapted to UI code. Again the slicing is not compatible with `TextureAtlas`, it's something I need to tackle more deeply in the future # Fixes * [x] I noticed that `TextureSlicer::compute_slices` could infinitely loop if the border was larger that the image half extents, now an error is triggered and the texture will fallback to being stretched * [x] I noticed that when using small textures with very small *tiling* options we could generate hundred of thousands of slices. Now I set a minimum size of 1 pixel per slice, which is already ridiculously small, and a warning will be sent at runtime when slice count goes above 1000 * [x] Sprite slicing with `flip_x` or `flip_y` would give incorrect results, correct flipping is now supported to both sprites and ui image nodes thanks to @odecay observation # GPU Alternative I create a separate branch attempting to implementing 9 slicing and tiling directly through the `ui.wgsl` fragment shader. It works but requires sending more data to the GPU: - slice border - tiling factors And more importantly, the actual quad *scale* which is hard to put in the shader with the current code, so that would be for a later iteration	2024-02-07 20:07:53 +00:00
Patrick Walton	4c15dd0fc5	Implement irradiance volumes. (#10268) ... # Objective Bevy could benefit from *irradiance volumes*, also known as *voxel global illumination* or simply as light probes (though this term is not preferred, as multiple techniques can be called light probes). Irradiance volumes are a form of baked global illumination; they work by sampling the light at the centers of each voxel within a cuboid. At runtime, the voxels surrounding the fragment center are sampled and interpolated to produce indirect diffuse illumination. ## Solution This is divided into two sections. The first is copied and pasted from the irradiance volume module documentation and describes the technique. The second part consists of notes on the implementation. ### Overview An *irradiance volume* is a cuboid voxel region consisting of regularly-spaced precomputed samples of diffuse indirect light. They're ideal if you have a dynamic object such as a character that can move about static non-moving geometry such as a level in a game, and you want that dynamic object to be affected by the light bouncing off that static geometry. To use irradiance volumes, you need to precompute, or *bake*, the indirect light in your scene. Bevy doesn't currently come with a way to do this. Fortunately, [Blender] provides a [baking tool] as part of the Eevee renderer, and its irradiance volumes are compatible with those used by Bevy. The [`bevy-baked-gi`] project provides a tool, `export-blender-gi`, that can extract the baked irradiance volumes from the Blender `.blend` file and package them up into a `.ktx2` texture for use by the engine. See the documentation in the `bevy-baked-gi` project for more details as to this workflow. Like all light probes in Bevy, irradiance volumes are 1×1×1 cubes that can be arbitrarily scaled, rotated, and positioned in a scene with the [`bevy_transform::components::Transform`] component. The 3D voxel grid will be stretched to fill the interior of the cube, and the illumination from the irradiance volume will apply to all fragments within that bounding region. Bevy's irradiance volumes are based on Valve's [*ambient cubes*] as used in *Half-Life 2* ([Mitchell 2006], slide 27). These encode a single color of light from the six 3D cardinal directions and blend the sides together according to the surface normal. The primary reason for choosing ambient cubes is to match Blender, so that its Eevee renderer can be used for baking. However, they also have some advantages over the common second-order spherical harmonics approach: ambient cubes don't suffer from ringing artifacts, they are smaller (6 colors for ambient cubes as opposed to 9 for spherical harmonics), and evaluation is faster. A smaller basis allows for a denser grid of voxels with the same storage requirements. If you wish to use a tool other than `export-blender-gi` to produce the irradiance volumes, you'll need to pack the irradiance volumes in the following format. The irradiance volume of resolution *(Rx, Ry, Rz)* is expected to be a 3D texture of dimensions *(Rx, 2Ry, 3Rz)*. The unnormalized texture coordinate *(s, t, p)* of the voxel at coordinate *(x, y, z)* with side *S* ∈ *{-X, +X, -Y, +Y, -Z, +Z}* is as follows: ```text s = x t = y + ⎰ 0 if S ∈ {-X, -Y, -Z} ⎱ Ry if S ∈ {+X, +Y, +Z} ⎧ 0 if S ∈ {-X, +X} p = z + ⎨ Rz if S ∈ {-Y, +Y} ⎩ 2Rz if S ∈ {-Z, +Z} ``` Visually, in a left-handed coordinate system with Y up, viewed from the right, the 3D texture looks like a stacked series of voxel grids, one for each cube side, in this order: | **+X** | **+Y** | **+Z** | | ------ | ------ | ------ | | **-X** | **-Y** | **-Z** | A terminology note: Other engines may refer to irradiance volumes as *voxel global illumination*, *VXGI*, or simply as *light probes*. Sometimes *light probe* refers to what Bevy calls a reflection probe. In Bevy, *light probe* is a generic term that encompasses all cuboid bounding regions that capture indirect illumination, whether based on voxels or not. Note that, if binding arrays aren't supported (e.g. on WebGPU or WebGL 2), then only the closest irradiance volume to the view will be taken into account during rendering. [*ambient cubes*]: https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf [Mitchell 2006]: https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf [Blender]: http://blender.org/ [baking tool]: https://docs.blender.org/manual/en/latest/render/eevee/render_settings/indirect_lighting.html [`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi ### Implementation notes This patch generalizes light probes so as to reuse as much code as possible between irradiance volumes and the existing reflection probes. This approach was chosen because both techniques share numerous similarities: 1. Both irradiance volumes and reflection probes are cuboid bounding regions. 2. Both are responsible for providing baked indirect light. 3. Both techniques involve presenting a variable number of textures to the shader from which indirect light is sampled. (In the current implementation, this uses binding arrays.) 4. Both irradiance volumes and reflection probes require gathering and sorting probes by distance on CPU. 5. Both techniques require the GPU to search through a list of bounding regions. 6. Both will eventually want to have falloff so that we can smoothly blend as objects enter and exit the probes' influence ranges. (This is not implemented yet to keep this patch relatively small and reviewable.) To do this, we generalize most of the methods in the reflection probes patch #11366 to be generic over a trait, `LightProbeComponent`. This trait is implemented by both `EnvironmentMapLight` (for reflection probes) and `IrradianceVolume` (for irradiance volumes). Using a trait will allow us to add more types of light probes in the future. In particular, I highly suspect we will want real-time reflection planes for mirrors in the future, which can be easily slotted into this framework. ## Changelog > This section is optional. If this was a trivial fix, or has no externally-visible impact, you can delete this section. ### Added * A new `IrradianceVolume` asset type is available for baked voxelized light probes. You can bake the global illumination using Blender or another tool of your choice and use it in Bevy to apply indirect illumination to dynamic objects.	2024-02-06 23:23:20 +00:00
NiseVoid	ab9447ac32	Add example for bounding volumes and intersection tests (#11666) ... # Objective - Create an example for bounding volumes and intersection tests ## Solution - Add an example with a few bounding volumes, created from primitives - Allow the user to cycle trough the different intersection tests	2024-02-03 17:11:01 +00:00
David M. Lary	5c52d0aeee	System Stepping implemented as Resource (#8453) ... # Objective Add interactive system debugging capabilities to bevy, providing step/break/continue style capabilities to running system schedules. * Original implementation: #8063 - `ignore_stepping()` everywhere was too much complexity * Schedule-config & Resource discussion: #8168 - Decided on selective adding of Schedules & Resource-based control ## Solution Created `Stepping` Resource. This resource can be used to enable stepping on a per-schedule basis. Systems within schedules can be individually configured to: * AlwaysRun: Ignore any stepping state and run every frame * NeverRun: Never run while stepping is enabled - this allows for disabling of systems while debugging * Break: If we're running the full frame, stop before this system is run Stepping provides two modes of execution that reflect traditional debuggers: * Step-based: Only execute one system at a time * Continue/Break: Run all systems, but stop before running a system marked as Break ### Demo https://user-images.githubusercontent.com/857742/233630981-99f3bbda-9ca6-4cc4-a00f-171c4946dc47.mov Breakout has been modified to use Stepping. The game runs normally for a couple of seconds, then stepping is enabled and the game appears to pause. A list of Schedules & Systems appears with a cursor at the first System in the list. The demo then steps forward full frames using the spacebar until the ball is about to hit a brick. Then we step system by system as the ball impacts a brick, showing the cursor moving through the individual systems. Finally the demo switches back to frame stepping as the ball changes course. ### Limitations Due to architectural constraints in bevy, there are some cases systems stepping will not function as a user would expect. #### Event-driven systems Stepping does not support systems that are driven by `Event`s as events are flushed after 1-2 frames. Although game systems are not running while stepping, ignored systems are still running every frame, so events will be flushed. This presents to the user as stepping the event-driven system never executes the system. It does execute, but the events have already been flushed. This can be resolved by changing event handling to use a buffer for events, and only dropping an event once all readers have read it. The work-around to allow these systems to properly execute during stepping is to have them ignore stepping: `app.add_systems(event_driven_system.ignore_stepping())`. This was done in the breakout example to ensure sound played even while stepping. #### Conditional Systems When a system is stepped, it is given an opportunity to run. If the conditions of the system say it should not run, it will not. Similar to Event-driven systems, if a system is conditional, and that condition is only true for a very small time window, then stepping the system may not execute the system. This includes depending on any sort of external clock. This exhibits to the user as the system not always running when it is stepped. A solution to this limitation is to ensure any conditions are consistent while stepping is enabled. For example, all systems that modify any state the condition uses should also enable stepping. #### State-transition Systems Stepping is configured on the per-`Schedule` level, requiring the user to have a `ScheduleLabel`. To support state-transition systems, bevy generates needed schedules dynamically. Currently it’s very difficult (if not impossible, I haven’t verified) for the user to get the labels for these schedules. Without ready access to the dynamically generated schedules, and a resolution for the `Event` lifetime, **stepping of the state-transition systems is not supported** --- ## Changelog - `Schedule::run()` updated to consult `Stepping` Resource to determine which Systems to run each frame - Added `Schedule.label` as a `BoxedSystemLabel`, along with supporting `Schedule::set_label()` and `Schedule::label()` methods - `Stepping` needed to know which `Schedule` was running, and prior to this PR, `Schedule` didn't track its own label - Would have preferred to add `Schedule::with_label()` and remove `Schedule::new()`, but this PR touches enough already - Added calls to `Schedule.set_label()` to `App` and `World` as needed - Added `Stepping` resource - Added `Stepping::begin_frame()` system to `MainSchedulePlugin` - Run before `Main::run_main()` - Notifies any `Stepping` Resource a new render frame is starting ## Migration Guide - Add a call to `Schedule::set_label()` for any custom `Schedule` - This is only required if the `Schedule` will be stepped --------- Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2024-02-03 05:18:38 +00:00
Duncan	176223b406	Fix embedded asset path manipulation (#10383) ... # Objective Fixes #10377 ## Solution Use `Path::strip_prefix` instead of `str::split`. Avoid any explicit "/" characters in path manipulation. --- ## Changelog - Added: example of embedded asset loading - Added: support embedded assets in external crates - Fixed: resolution of embedded assets - Fixed: unexpected runtime panic during asset path resolution ## Migration Guide No API changes. --------- Co-authored-by: Shane Celis <shane.celis@gmail.com>	2024-02-02 14:49:05 +00:00
Joona Aalto	2bf481c03b	Add Meshable trait and implement meshing for 2D primitives (#11431) ... # Objective The first part of #10569, split up from #11007. The goal is to implement meshing support for Bevy's new geometric primitives, starting with 2D primitives. 3D meshing will be added in a follow-up, and we can consider removing the old mesh shapes completely. ## Solution Add a `Meshable` trait that primitives need to implement to support meshing, as suggested by the [RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#meshing). ```rust /// A trait for shapes that can be turned into a [`Mesh`]. pub trait Meshable { /// The output of [`Self::mesh`]. This can either be a [`Mesh`] /// or a builder used for creating a [`Mesh`]. type Output; /// Creates a [`Mesh`] for a shape. fn mesh(&self) -> Self::Output; } ``` This PR implements it for the following primitives: - `Circle` - `Ellipse` - `Rectangle` - `RegularPolygon` - `Triangle2d` The `mesh` method typically returns a builder-like struct such as `CircleMeshBuilder`. This is needed to support shape-specific configuration for things like mesh resolution or UV configuration: ```rust meshes.add(Circle { radius: 0.5 }.mesh().resolution(64)); ``` Note that if no configuration is needed, you can even skip calling `mesh` because `From<MyPrimitive>` is implemented for `Mesh`: ```rust meshes.add(Circle { radius: 0.5 }); ``` I also updated the `2d_shapes` example to use primitives, and tweaked the colors to have better contrast against the dark background. Before:  After:  Here you can see the UVs and different facing directions: (taken from #11007, so excuse the 3D primitives at the bottom left)  --- ## Changelog - Added `bevy_render::mesh::primitives` module - Added `Meshable` trait and implemented it for: - `Circle` - `Ellipse` - `Rectangle` - `RegularPolygon` - `Triangle2d` - Implemented `Default` and `Copy` for several 2D primitives - Updated `2d_shapes` example to use primitives - Tweaked colors in `2d_shapes` example to have better contrast against the (new-ish) dark background --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2024-01-29 16:47:47 +00:00
Alice Cecile	149a313850	Add an example demonstrating how to send and receive events in the same system (#11574) ... # Objective - Sending and receiving events of the same type in the same system is a reasonably common need, generally due to event filtering. - However, actually doing so is non-trivial, as the borrow checker simultaneous hates mutable and immutable access. ## Solution - Demonstrate two sensible patterns for doing so. - Update the `ManualEventReader` docs to be more clear and link to this example. --------- Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com> Co-authored-by: Joona Aalto <jondolf.dev@gmail.com> Co-authored-by: ickk <git@ickk.io>	2024-01-29 16:41:27 +00:00
Elabajaba	35ac1b152e	Update to wgpu 0.19 and raw-window-handle 0.6 (#11280) ... # Objective Keep core dependencies up to date. ## Solution Update the dependencies. wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was included in this. The rwh 0.6 version bump is just the simplest way of doing it. There might be a way we can take advantage of wgpu's new safe surface creation api, but I'm not familiar enough with bevy's window management to untangle it and my attempt ended up being a mess of lifetimes and rustc complaining about missing trait impls (that were implemented). Thanks to @MiniaczQ for the (much simpler) rwh 0.6 version bump code. Unblocks https://github.com/bevyengine/bevy/pull/9172 and https://github.com/bevyengine/bevy/pull/10812 ~~This might be blocked on cpal and oboe updating their ndk versions to 0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested on android, and everything seems to work correctly (audio properly stops when minimized, and plays when re-focusing the app). --- ## Changelog - `wgpu` has been updated to 0.19! The long awaited arcanization has been merged (for more info, see https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan should now be working again on Intel GPUs. - Targeting WebGPU now requires that you add the new `webgpu` feature (setting the `RUSTFLAGS` environment variable to `--cfg=web_sys_unstable_apis` is still required). This feature currently overrides the `webgl2` feature if you have both enabled (the `webgl2` feature is enabled by default), so it is not recommended to add it as a default feature to libraries without putting it behind a flag that allows library users to opt out of it! In the future we plan on supporting wasm binaries that can target both webgl2 and webgpu now that wgpu added support for doing so (see https://github.com/bevyengine/bevy/issues/11505). - `raw-window-handle` has been updated to version 0.6. ## Migration Guide - `bevy_render::instance_index::get_instance_index()` has been removed as the webgl2 workaround is no longer required as it was fixed upstream in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed. - WebGPU now requires the new `webgpu` feature to be enabled. The `webgpu` feature currently overrides the `webgl2` feature so you no longer need to disable all default features and re-add them all when targeting `webgpu`, but binaries built with both the `webgpu` and `webgl2` features will only target the webgpu backend, and will only work on browsers that support WebGPU. - Places where you conditionally compiled things for webgl2 need to be updated because of this change, eg: - `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]` becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"), feature = "webgpu"))]` - `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes `#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature = "webgpu")))]` - `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature = "webgpu")))` - `create_texture_with_data` now also takes a `TextureDataOrder`. You can probably just set this to `TextureDataOrder::default()` - `TextureFormat`'s `block_size` has been renamed to `block_copy_size` - See the `wgpu` changelog for anything I might've missed: https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md --------- Co-authored-by: François <mockersf@gmail.com>	2024-01-26 18:14:21 +00:00
vero	fb367dac72	Add Animated Material example (#11524) ... # Objective - Fixes #11516 ## Solution - Add Animated Material example (colors are hue-cycling smoothly per-mesh)  Note: this example reproduces the perf issue found in #10610 pretty consistently, with and without the changes from that PR included. Frame time is sometimes around 4.3ms, other times around 12-14ms. Its pretty random per run. I think this clears #10610 for merge.	2024-01-26 13:34:46 +00:00
Manuel Fuchs	79b4f26158	Add custom schedule example (#11527) ... # Objective Fixes #11411 ## Solution - Added a simple example how to create and configure custom schedules that are run by the `Main` schedule. - Spot checked some of the API docs used, fixed `App::add_schedule` docs that referred to a function argument that was removed by #9600. ## Open Questions - While spot checking the docs, I noticed that the `Schedule` label is stored in a field called `name` instead of `label`. This seems unintuitive since the term label is used everywhere else. Should we change that field name? It was introduced in #9600. If so, I do think this change would be out of scope for this PR that mainly adds the example.	2024-01-25 17:51:53 +00:00
Patrick Walton	83d6600267	Implement minimal reflection probes (fixed macOS, iOS, and Android). (#11366) ... This pull request re-submits #10057, which was backed out for breaking macOS, iOS, and Android. I've tested this version on macOS and Android and on the iOS simulator. # Objective This pull request implements *reflection probes*, which generalize environment maps to allow for multiple environment maps in the same scene, each of which has an axis-aligned bounding box. This is a standard feature of physically-based renderers and was inspired by [the corresponding feature in Blender's Eevee renderer]. ## Solution This is a minimal implementation of reflection probes that allows artists to define cuboid bounding regions associated with environment maps. For every view, on every frame, a system builds up a list of the nearest 4 reflection probes that are within the view's frustum and supplies that list to the shader. The PBR fragment shader searches through the list, finds the first containing reflection probe, and uses it for indirect lighting, falling back to the view's environment map if none is found. Both forward and deferred renderers are fully supported. A reflection probe is an entity with a pair of components, *LightProbe* and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to position it in the world). The *LightProbe* component (along with the *Transform*) defines the bounding region, while the *EnvironmentMapLight* component specifies the associated diffuse and specular cubemaps. A frequent question is "why two components instead of just one?" The advantages of this setup are: 1. It's readily extensible to other types of light probes, in particular *irradiance volumes* (also known as ambient cubes or voxel global illumination), which use the same approach of bounding cuboids. With a single component that applies to both reflection probes and irradiance volumes, we can share the logic that implements falloff and blending between multiple light probes between both of those features. 2. It reduces duplication between the existing *EnvironmentMapLight* and these new reflection probes. Systems can treat environment maps attached to cameras the same way they treat environment maps applied to reflection probes if they wish. Internally, we gather up all environment maps in the scene and place them in a cubemap array. At present, this means that all environment maps must have the same size, mipmap count, and texture format. A warning is emitted if this restriction is violated. We could potentially relax this in the future as part of the automatic mipmap generation work, which could easily do texture format conversion as part of its preprocessing. An easy way to generate reflection probe cubemaps is to bake them in Blender and use the `export-blender-gi` tool that's part of the [`bevy-baked-gi`] project. This tool takes a `.blend` file containing baked cubemaps as input and exports cubemap images, pre-filtered with an embedded fork of the [glTF IBL Sampler], alongside a corresponding `.scn.ron` file that the scene spawner can use to recreate the reflection probes. Note that this is intentionally a minimal implementation, to aid reviewability. Known issues are: * Reflection probes are basically unsupported on WebGL 2, because WebGL 2 has no cubemap arrays. (Strictly speaking, you can have precisely one reflection probe in the scene if you have no other cubemaps anywhere, but this isn't very useful.) * Reflection probes have no falloff, so reflections will abruptly change when objects move from one bounding region to another. * As mentioned before, all cubemaps in the world of a given type (diffuse or specular) must have the same size, format, and mipmap count. Future work includes: * Blending between multiple reflection probes. * A falloff/fade-out region so that reflected objects disappear gradually instead of vanishing all at once. * Irradiance volumes for voxel-based global illumination. This should reuse much of the reflection probe logic, as they're both GI techniques based on cuboid bounding regions. * Support for WebGL 2, by breaking batches when reflection probes are used. These issues notwithstanding, I think it's best to land this with roughly the current set of functionality, because this patch is useful as is and adding everything above would make the pull request significantly larger and harder to review. --- ## Changelog ### Added * A new *LightProbe* component is available that specifies a bounding region that an *EnvironmentMapLight* applies to. The combination of a *LightProbe* and an *EnvironmentMapLight* offers *reflection probe* functionality similar to that available in other engines. [the corresponding feature in Blender's Eevee renderer]: https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html [`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi [glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler	2024-01-19 07:33:52 +00:00
James O'Brien	ea42d14344	Dynamic queries and builder API (#9774) ... # Objective Expand the existing `Query` API to support more dynamic use cases i.e. scripting. ## Prior Art - #6390 - #8308 - #10037 ## Solution - Create a `QueryBuilder` with runtime methods to define the set of component accesses for a built query. - Create new `WorldQueryData` implementations `FilteredEntityMut` and `FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that provide run time checked access to the components included in a given query. - Add new methods to `Query` to create "query lens" with a subset of the access of the initial query. ### Query Builder The `QueryBuilder` API allows you to define a query at runtime. At it's most basic use it will simply create a query with the corresponding type signature: ```rust let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build(); // is equivalent to let query = QueryState::<Entity, With<A>>::new(&mut world); ``` Before calling `.build()` you also have the opportunity to add additional accesses and filters. Here is a simple example where we add additional filter terms: ```rust let entity_a = world.spawn((A(0), B(0))).id(); let entity_b = world.spawn((A(0), C(0))).id(); let mut query_a = QueryBuilder::<Entity>::new(&mut world) .with::<A>() .without::<C>() .build(); assert_eq!(entity_a, query_a.single(&world)); ``` This alone is useful in that allows you to decide which archetypes your query will match at runtime. However it is also very limited, consider a case like the following: ```rust let query_a = QueryBuilder::<&A>::new(&mut world) // Add an additional access .data::<&B>() .build(); ``` This will grant the query an additional read access to component B however we have no way of accessing the data while iterating as the type signature still only includes &A. For an even more concrete example of this consider dynamic components: ```rust let query_a = QueryBuilder::<Entity>::new(&mut world) // Adding a filter is easy since it doesn't need be read later .with_id(component_id_a) // How do I access the data of this component? .ref_id(component_id_b) .build(); ``` With this in mind the `QueryBuilder` API seems somewhat incomplete by itself, we need some way method of accessing the components dynamically. So here's one: ### Query Transmutation If the problem is not having the component in the type signature why not just add it? This PR also adds transmute methods to `QueryBuilder` and `QueryState`. Here's a simple example: ```rust world.spawn(A(0)); world.spawn((A(1), B(0))); let mut query = QueryBuilder::<()>::new(&mut world) .with::<B>() .transmute::<&A>() .build(); query.iter(&world).for_each(|a| assert_eq!(a.0, 1)); ``` The `QueryState` and `QueryBuilder` transmute methods look quite similar but are different in one respect. Transmuting a builder will always succeed as it will just add the additional accesses needed for the new terms if they weren't already included. Transmuting a `QueryState` will panic in the case that the new type signature would give it access it didn't already have, for example: ```rust let query = QueryState::<&A, Option<&B>>::new(&mut world); /// This is fine, the access for Option<&A> is less restrictive than &A query.transmute::<Option<&A>>(&world); /// Oh no, this would allow access to &B on entities that might not have it, so it panics query.transmute::<&B>(&world); /// This is right out query.transmute::<&C>(&world); ``` This is quite an appealing API to also have available on `Query` however it does pose one additional wrinkle: In order to to change the iterator we need to create a new `QueryState` to back it. `Query` doesn't own it's own state though, it just borrows it, so we need a place to borrow it from. This is why `QueryLens` exists, it is a place to store the new state so it can be borrowed when you call `.query()` leaving you with an API like this: ```rust fn function_that_takes_a_query(query: &Query<&A>) { // ... } fn system(query: Query<(&A, &B)>) { let lens = query.transmute_lens::<&A>(); let q = lens.query(); function_that_takes_a_query(&q); } ``` Now you may be thinking: Hey, wait a second, you introduced the problem with dynamic components and then described a solution that only works for static components! Ok, you got me, I guess we need a bit more: ### Filtered Entity References Currently the only way you can access dynamic components on entities through a query is with either `EntityMut` or `EntityRef`, however these can access all components and so conflict with all other accesses. This PR introduces `FilteredEntityMut` and `FilteredEntityRef` as alternatives that have additional runtime checking to prevent accessing components that you shouldn't. This way you can build a query with a `QueryBuilder` and actually access the components you asked for: ```rust let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world) .ref_id(component_id_a) .with(component_id_b) .build(); let entity_ref = query.single(&world); // Returns Some(Ptr) as we have that component and are allowed to read it let a = entity_ref.get_by_id(component_id_a); // Will return None even though the entity does have the component, as we are not allowed to read it let b = entity_ref.get_by_id(component_id_b); ``` For the most part these new structs have the exact same methods as their non-filtered equivalents. Putting all of this together we can do some truly dynamic ECS queries, check out the `dynamic` example to see it in action: ``` Commands: comp, c Create new components spawn, s Spawn entities query, q Query for entities Enter a command with no parameters for usage. > c A, B, C, Data 4 Component A created with id: 0 Component B created with id: 1 Component C created with id: 2 Component Data created with id: 3 > s A, B, Data 1 Entity spawned with id: 0v0 > s A, C, Data 0 Entity spawned with id: 1v0 > q &Data 0v0: Data: [1, 0, 0, 0] 1v0: Data: [0, 0, 0, 0] > q B, &mut Data 0v0: Data: [2, 1, 1, 1] > q B || C, &Data 0v0: Data: [2, 1, 1, 1] 1v0: Data: [0, 0, 0, 0] ``` ## Changelog - Add new `transmute_lens` methods to `Query`. - Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef` and `QueryLens` - `update_archetype_component_access` has been removed, archetype component accesses are now determined by the accesses set in `update_component_access` - Added method `set_access` to `WorldQuery`, this is called before `update_component_access` for queries that have a restricted set of accesses, such as those built by `QueryBuilder` or `QueryLens`. This is primarily used by the `FilteredEntity*` variants and has an empty trait implementation. - Added method `get_state` to `WorldQuery` as a fallible version of `init_state` when you don't have `&mut World` access. ## Future Work Improve performance of `FilteredEntityMut` and `FilteredEntityRef`, currently they have to determine the accesses a query has in a given archetype during iteration which is far from ideal, especially since we already did the work when matching the archetype in the first place. To avoid making more internal API changes I have left it out of this PR. --------- Co-authored-by: Mike Hsu <mike.hsu@gmail.com>	2024-01-16 19:16:49 +00:00
Roman Salnikov	eb9db21113	Camera-driven UI (#10559) ... # Objective Add support for presenting each UI tree on a specific window and viewport, while making as few breaking changes as possible. This PR is meant to resolve the following issues at once, since they're all related. - Fixes #5622 - Fixes #5570 - Fixes #5621 Adopted #5892 , but started over since the current codebase diverged significantly from the original PR branch. Also, I made a decision to propagate component to children instead of recursively iterating over nodes in search for the root. ## Solution Add a new optional component that can be inserted to UI root nodes and propagate to children to specify which camera it should render onto. This is then used to get the render target and the viewport for that UI tree. Since this component is optional, the default behavior should be to render onto the single camera (if only one exist) and warn of ambiguity if multiple cameras exist. This reduces the complexity for users with just one camera, while giving control in contexts where it matters. ## Changelog - Adds `TargetCamera(Entity)` component to specify which camera should a node tree be rendered into. If only one camera exists, this component is optional. - Adds an example of rendering UI to a texture and using it as a material in a 3D world. - Fixes recalculation of physical viewport size when target scale factor changes. This can happen when the window is moved between displays with different DPI. - Changes examples to demonstrate assigning UI to different viewports and windows and make interactions in an offset viewport testable. - Removes `UiCameraConfig`. UI visibility now can be controlled via combination of explicit `TargetCamera` and `Visibility` on the root nodes. --------- Co-authored-by: davier <bricedavier@gmail.com> Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>	2024-01-16 00:39:10 +00:00
Félix Lescaudey de Maneville	01139b3472	Sprite slicing and tiling (#10588) ... > Replaces #5213 # Objective Implement sprite tiling and [9 slice scaling](https://en.wikipedia.org/wiki/9-slice_scaling) for `bevy_sprite`. Allowing slice scaling and texture tiling. Basic scaling vs 9 slice scaling:  Slicing example: <img width="481" alt="Screenshot 2022-07-05 at 15 05 49" src="https://user-images.githubusercontent.com/26703856/177336112-9e961af0-c0af-4197-aec9-430c1170a79d.png"> Tiling example: <img width="1329" alt="Screenshot 2023-11-16 at 13 53 32" src="https://github.com/bevyengine/bevy/assets/26703856/14db39b7-d9e0-4bc3-ba0e-b1f2db39ae8f"> # Solution - `SpriteBundlue` now has a `scale_mode` component storing a `SpriteScaleMode` enum with three variants: - `Stretched` (default) - `Tiled` to have sprites tile horizontally and/or vertically - `Sliced` allowing 9 slicing the texture and optionally tile some sections with a `Textureslicer`. - `bevy_sprite` has two extra systems to compute a `ComputedTextureSlices` if necessary,: - One system react to changes on `Sprite`, `Handle<Image>` or `SpriteScaleMode` - The other listens to `AssetEvent<Image>` to compute slices on sprites when the texture is ready or changed - I updated the `bevy_sprite` extraction stage to extract potentially multiple textures instead of one, depending on the presence of `ComputedTextureSlices` - I added two examples showcasing the slicing and tiling feature. The addition of `ComputedTextureSlices` as a cache is to avoid querying the image data, to retrieve its dimensions, every frame in a extract or prepare stage. Also it reacts to changes so we can have stuff like this (tiling example): https://github.com/bevyengine/bevy/assets/26703856/a349a9f3-33c3-471f-8ef4-a0e5dfce3b01 # Related - [ ] Once #5103 or #10099 is merged I can enable tiling and slicing for texture sheets as ui # To discuss There is an other option, to consider slice/tiling as part of the asset, using the new asset preprocessing but I have no clue on how to do it. Also, instead of retrieving the Image dimensions, we could use the same system as the sprite sheet and have the user give the image dimensions directly (grid). But I think it's less user friendly --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: ickshonpe <david.curthoys@googlemail.com> Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>	2024-01-15 15:40:06 +00:00
Charles Bournhonesque	8c6d9b8103	Add support for updating the tracing subscriber in LogPlugin (#10822) ... # Objective This PR is heavily inspired by https://github.com/bevyengine/bevy/pull/7682 It aims to solve the same problem: allowing the user to extend the tracing subscriber with extra layers. (in my case, I'd like to use `use metrics_tracing_context::{MetricsLayer, TracingContextLayer};`) ## Solution I'm proposing a different api where the user has the opportunity to take the existing `subscriber` and apply any transformations on it. --- ## Changelog - Added a `update_subscriber` option on the `LogPlugin` that lets the user modify the `subscriber` (for example to extend it with more tracing `Layers` ## Migration Guide > This section is optional. If there are no breaking changes, you can delete this section. - Added a new field `update_subscriber` in the `LogPlugin` --------- Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>	2024-01-15 15:26:13 +00:00
François	3d996639a0	Revert "Implement minimal reflection probes. (#10057)" (#11307) ... # Objective - Fix working on macOS, iOS, Android on main - Fixes #11281 - Fixes #11282 - Fixes #11283 - Fixes #11299 ## Solution - Revert #10057	2024-01-12 20:41:51 +00:00
Stepan Koltsov	06bf928927	Option to enable deterministic rendering (#11248) ... # Objective Issue #10243: rendering multiple triangles in the same place results in flickering. ## Solution Considered these alternatives: - `depth_bias` may not work, because of high number of entities, so creating a material per entity is practically not possible - rendering at slightly different positions does not work, because when camera is far, float rounding causes the same issues (edit: assuming we have to use the same `depth_bias`) - considered implementing deterministic operation like `query.par_iter().flat_map(...).collect()` to be used in `check_visibility` system (which would solve the issue since query is deterministic), and could not figure out how to make it as cheap as current approach with thread-local collectors (#11249) So adding an option to sort entities after `check_visibility` system run. Should not be too bad, because after visibility check, only a handful entities remain. This is probably not the only source of non-determinism in Bevy, but this is one I could find so far. At least it fixes the repro example. ## Changelog - `DeterministicRenderingConfig` option to enable deterministic rendering ## Test <img width="1392" alt="image" src="https://github.com/bevyengine/bevy/assets/28969/c735bce1-3a71-44cd-8677-c19f6c0ee6bd"> --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2024-01-09 00:46:01 +00:00
Stepan Koltsov	42e990861c	Remove apply_deferred example (#11142) ... # Objective Re this comment: https://github.com/bevyengine/bevy/pull/11141#issuecomment-1872455313 Since https://github.com/bevyengine/bevy/pull/9822, Bevy automatically inserts `apply_deferred` between systems with dependencies where needed, so manually inserted `apply_deferred` doesn't to anything useful, and in current state this example does more harm than good. ## Solution The example can be modified with removal of automatic `apply_deferred` insertion, but that would immediately upgrade this example from beginner level, to upper intermediate. Most users don't need to disable automatic sync point insertion, and remaining few who do probably already know how it works. CC @hymm	2024-01-08 22:34:32 +00:00
Patrick Walton	54a943d232	Implement minimal reflection probes. (#10057) ... # Objective This pull request implements *reflection probes*, which generalize environment maps to allow for multiple environment maps in the same scene, each of which has an axis-aligned bounding box. This is a standard feature of physically-based renderers and was inspired by [the corresponding feature in Blender's Eevee renderer]. ## Solution This is a minimal implementation of reflection probes that allows artists to define cuboid bounding regions associated with environment maps. For every view, on every frame, a system builds up a list of the nearest 4 reflection probes that are within the view's frustum and supplies that list to the shader. The PBR fragment shader searches through the list, finds the first containing reflection probe, and uses it for indirect lighting, falling back to the view's environment map if none is found. Both forward and deferred renderers are fully supported. A reflection probe is an entity with a pair of components, *LightProbe* and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to position it in the world). The *LightProbe* component (along with the *Transform*) defines the bounding region, while the *EnvironmentMapLight* component specifies the associated diffuse and specular cubemaps. A frequent question is "why two components instead of just one?" The advantages of this setup are: 1. It's readily extensible to other types of light probes, in particular *irradiance volumes* (also known as ambient cubes or voxel global illumination), which use the same approach of bounding cuboids. With a single component that applies to both reflection probes and irradiance volumes, we can share the logic that implements falloff and blending between multiple light probes between both of those features. 2. It reduces duplication between the existing *EnvironmentMapLight* and these new reflection probes. Systems can treat environment maps attached to cameras the same way they treat environment maps applied to reflection probes if they wish. Internally, we gather up all environment maps in the scene and place them in a cubemap array. At present, this means that all environment maps must have the same size, mipmap count, and texture format. A warning is emitted if this restriction is violated. We could potentially relax this in the future as part of the automatic mipmap generation work, which could easily do texture format conversion as part of its preprocessing. An easy way to generate reflection probe cubemaps is to bake them in Blender and use the `export-blender-gi` tool that's part of the [`bevy-baked-gi`] project. This tool takes a `.blend` file containing baked cubemaps as input and exports cubemap images, pre-filtered with an embedded fork of the [glTF IBL Sampler], alongside a corresponding `.scn.ron` file that the scene spawner can use to recreate the reflection probes. Note that this is intentionally a minimal implementation, to aid reviewability. Known issues are: * Reflection probes are basically unsupported on WebGL 2, because WebGL 2 has no cubemap arrays. (Strictly speaking, you can have precisely one reflection probe in the scene if you have no other cubemaps anywhere, but this isn't very useful.) * Reflection probes have no falloff, so reflections will abruptly change when objects move from one bounding region to another. * As mentioned before, all cubemaps in the world of a given type (diffuse or specular) must have the same size, format, and mipmap count. Future work includes: * Blending between multiple reflection probes. * A falloff/fade-out region so that reflected objects disappear gradually instead of vanishing all at once. * Irradiance volumes for voxel-based global illumination. This should reuse much of the reflection probe logic, as they're both GI techniques based on cuboid bounding regions. * Support for WebGL 2, by breaking batches when reflection probes are used. These issues notwithstanding, I think it's best to land this with roughly the current set of functionality, because this patch is useful as is and adding everything above would make the pull request significantly larger and harder to review. --- ## Changelog ### Added * A new *LightProbe* component is available that specifies a bounding region that an *EnvironmentMapLight* applies to. The combination of a *LightProbe* and an *EnvironmentMapLight* offers *reflection probe* functionality similar to that available in other engines. [the corresponding feature in Blender's Eevee renderer]: https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html [`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi [glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler	2024-01-08 22:09:17 +00:00
Patrick Walton	dd14f3a477	Implement lightmaps. (#10231) ...  # Objective Lightmaps, textures that store baked global illumination, have been a mainstay of real-time graphics for decades. Bevy currently has no support for them, so this pull request implements them. ## Solution The new `Lightmap` component can be attached to any entity that contains a `Handle<Mesh>` and a `StandardMaterial`. When present, it will be applied in the PBR shader. Because multiple lightmaps are frequently packed into atlases, each lightmap may have its own UV boundaries within its texture. An `exposure` field is also provided, to control the brightness of the lightmap. Note that this PR doesn't provide any way to bake the lightmaps. That can be done with [The Lightmapper] or another solution, such as Unity's Bakery. --- ## Changelog ### Added * A new component, `Lightmap`, is available, for baked global illumination. If your mesh has a second UV channel (UV1), and you attach this component to the entity with that mesh, Bevy will apply the texture referenced in the lightmap. [The Lightmapper]: https://github.com/Naxela/The_Lightmapper --------- Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2024-01-02 20:38:47 +00:00
Nurzhan Sakén	8067e46049	Add example for pixel-perfect grid snapping in 2D (#8112) ... # Objective Provide an example of how to achieve pixel-perfect "grid snapping" in 2D via rendering to a texture. This is a common use case in retro pixel art game development. ## Solution Render sprites to a canvas via a Camera, then use another (scaled up) Camera to render the resulting canvas to the screen. This example is based on the `3d/render_to_texture.rs` example. Furthermore, this example demonstrates mixing retro-style graphics with high-resolution graphics, as well as pixel-snapped rendering of a `MaterialMesh2dBundle`.	2023-12-26 17:15:50 +00:00
Zachary Harrold	46b8e904f4	Added Method to Allow Pipelined Asset Loading (#10565) ... # Objective - Fixes #10518 ## Solution I've added a method to `LoadContext`, `load_direct_with_reader`, which mirrors the behaviour of `load_direct` with a single key difference: it is provided with the `Reader` by the caller, rather than getting it from the contained `AssetServer`. This allows for an `AssetLoader` to process its `Reader` stream, and then directly hand the results off to the `LoadContext` to handle further loading. The outer `AssetLoader` can control how the `Reader` is interpreted by providing a relevant `AssetPath`. For example, a Gzip decompression loader could process the asset `images/my_image.png.gz` by decompressing the bytes, then handing the decompressed result to the `LoadContext` with the new path `images/my_image.png.gz/my_image.png`. This intuitively reflects the nature of contained assets, whilst avoiding unintended behaviour, since the generated path cannot be a real file path (a file and folder of the same name cannot coexist in most file-systems). ```rust #[derive(Asset, TypePath)] pub struct GzAsset { pub uncompressed: ErasedLoadedAsset, } #[derive(Default)] pub struct GzAssetLoader; impl AssetLoader for GzAssetLoader { type Asset = GzAsset; type Settings = (); type Error = GzAssetLoaderError; fn load<'a>( &'a self, reader: &'a mut Reader, _settings: &'a (), load_context: &'a mut LoadContext, ) -> BoxedFuture<'a, Result<Self::Asset, Self::Error>> { Box::pin(async move { let compressed_path = load_context.path(); let file_name = compressed_path .file_name() .ok_or(GzAssetLoaderError::IndeterminateFilePath)? .to_string_lossy(); let uncompressed_file_name = file_name .strip_suffix(".gz") .ok_or(GzAssetLoaderError::IndeterminateFilePath)?; let contained_path = compressed_path.join(uncompressed_file_name); let mut bytes_compressed = Vec::new(); reader.read_to_end(&mut bytes_compressed).await?; let mut decoder = GzDecoder::new(bytes_compressed.as_slice()); let mut bytes_uncompressed = Vec::new(); decoder.read_to_end(&mut bytes_uncompressed)?; // Now that we have decompressed the asset, let's pass it back to the // context to continue loading let mut reader = VecReader::new(bytes_uncompressed); let uncompressed = load_context .load_direct_with_reader(&mut reader, contained_path) .await?; Ok(GzAsset { uncompressed }) }) } fn extensions(&self) -> &[&str] { &["gz"] } } ``` Because this example is so prudent, I've included an `asset_decompression` example which implements this exact behaviour: ```rust fn main() { App::new() .add_plugins(DefaultPlugins) .init_asset::<GzAsset>() .init_asset_loader::<GzAssetLoader>() .add_systems(Startup, setup) .add_systems(Update, decompress::<Image>) .run(); } fn setup(mut commands: Commands, asset_server: Res<AssetServer>) { commands.spawn(Camera2dBundle::default()); commands.spawn(( Compressed::<Image> { compressed: asset_server.load("data/compressed_image.png.gz"), ..default() }, Sprite::default(), TransformBundle::default(), VisibilityBundle::default(), )); } fn decompress<A: Asset>( mut commands: Commands, asset_server: Res<AssetServer>, mut compressed_assets: ResMut<Assets<GzAsset>>, query: Query<(Entity, &Compressed<A>)>, ) { for (entity, Compressed { compressed, .. }) in query.iter() { let Some(GzAsset { uncompressed }) = compressed_assets.remove(compressed) else { continue; }; let uncompressed = uncompressed.take::<A>().unwrap(); commands .entity(entity) .remove::<Compressed<A>>() .insert(asset_server.add(uncompressed)); } } ``` A key limitation to this design is how to type the internally loaded asset, since the example `GzAssetLoader` is unaware of the internal asset type `A`. As such, in this example I store the contained asset as an `ErasedLoadedAsset`, and leave it up to the consumer of the `GzAsset` to handle typing the final result, which is the purpose of the `decompress` system. This limitation can be worked around by providing type information to the `GzAssetLoader`, such as `GzAssetLoader<Image, ImageAssetLoader>`, but this would require registering the asset loader for every possible decompression target. Aside from this limitation, nested asset containerisation works as an end user would expect; if the user registers a `TarAssetLoader`, and a `GzAssetLoader`, then they can load assets with compound containerisation, such as `images.tar.gz`. --- ## Changelog - Added `LoadContext::load_direct_with_reader` - Added `asset_decompression` example ## Notes - While I believe my implementation of a Gzip asset loader is reasonable, I haven't included it as a public feature of `bevy_asset` to keep the scope of this PR as focussed as possible. - I have included `flate2` as a `dev-dependency` for the example; it is not included in the main dependency graph.	2023-11-16 17:47:31 +00:00
IceSentry	b1aa74d511	Add shader_material_2d example (#10542) ... # Objective - 2d materials have subtle differences with 3d materials that aren't obvious to beginners ## Solution - Add an example that shows how to make a 2d material	2023-11-14 02:18:25 +00:00
Markus Ort	fd232ad360	Add UI Materials (#9506) ... # Objective - Add Ui Materials so that UI can render more complex and animated widgets. - Fixes #5607 ## Solution - Create a UiMaterial trait for specifying a Shader Asset and Bind Group Layout/Data. - Create a pipeline for rendering these Materials inside the Ui layout/tree. - Create a MaterialNodeBundle for simple spawning. ## Changelog - Created a `UiMaterial` trait for specifying a Shader asset and Bind Group. - Created a `UiMaterialPipeline` for rendering said Materials. - Added Example [`ui_material` ](https://github.com/MarkusTheOrt/bevy/blob/ui_material/examples/ui/ui_material.rs) for example usage. - Created [`UiVertexOutput`](https://github.com/MarkusTheOrt/bevy/blob/ui_material/crates/bevy_ui/src/render/ui_vertex_output.wgsl) export as VertexData for shaders. - Created [`material_ui`](https://github.com/MarkusTheOrt/bevy/blob/ui_material/crates/bevy_ui/src/render/ui_material.wgsl) shader as default for both Vertex and Fragment shaders. --------- Co-authored-by: ickshonpe <david.curthoys@googlemail.com> Co-authored-by: François <mockersf@gmail.com>	2023-11-03 22:33:01 +00:00
Marco Buono	44928e0df4	StandardMaterial Light Transmission (#8015) ... # Objective <img width="1920" alt="Screenshot 2023-04-26 at 01 07 34" src="https://user-images.githubusercontent.com/418473/234467578-0f34187b-5863-4ea1-88e9-7a6bb8ce8da3.png"> This PR adds both diffuse and specular light transmission capabilities to the `StandardMaterial`, with support for screen space refractions. This enables realistically representing a wide range of real-world materials, such as: - Glass; (Including frosted glass) - Transparent and translucent plastics; - Various liquids and gels; - Gemstones; - Marble; - Wax; - Paper; - Leaves; - Porcelain. Unlike existing support for transparency, light transmission does not rely on fixed function alpha blending, and therefore works with both `AlphaMode::Opaque` and `AlphaMode::Mask` materials. ## Solution - Introduces a number of transmission related fields in the `StandardMaterial`; - For specular transmission: - Adds logic to take a view main texture snapshot after the opaque phase; (in order to perform screen space refractions) - Introduces a new `Transmissive3d` phase to the renderer, to which all meshes with `transmission > 0.0` materials are sent. - Calculates a light exit point (of the approximate mesh volume) using `ior` and `thickness` properties - Samples the snapshot texture with an adaptive number of taps across a `roughness`-controlled radius enabling “blurry” refractions - For diffuse transmission: - Approximates transmitted diffuse light by using a second, flipped + displaced, diffuse-only Lambertian lobe for each light source. ## To Do - [x] Figure out where `fresnel_mix()` is taking place, if at all, and where `dielectric_specular` is being calculated, if at all, and update them to use the `ior` value (Not a blocker, just a nice-to-have for more correct BSDF) - To the _best of my knowledge, this is now taking place, after 964340cdd. The fresnel mix is actually "split" into two parts in our implementation, one `(1 - fresnel(...))` in the transmission, and `fresnel()` in the light implementations. A surface with more reflectance now will produce slightly dimmer transmission towards the grazing angle, as more of the light gets reflected. - [x] Add `transmission_texture` - [x] Add `diffuse_transmission_texture` - [x] Add `thickness_texture` - [x] Add `attenuation_distance` and `attenuation_color` - [x] Connect values to glTF loader - [x] `transmission` and `transmission_texture` - [x] `thickness` and `thickness_texture` - [x] `ior` - [ ] `diffuse_transmission` and `diffuse_transmission_texture` (needs upstream support in `gltf` crate, not a blocker) - [x] Add support for multiple screen space refraction “steps” - [x] Conditionally create no transmission snapshot texture at all if `steps == 0` - [x] Conditionally enable/disable screen space refraction transmission snapshots - [x] Read from depth pre-pass to prevent refracting pixels in front of the light exit point - [x] Use `interleaved_gradient_noise()` function for sampling blur in a way that benefits from TAA - [x] Drill down a TAA `#define`, tweak some aspects of the effect conditionally based on it - [x] Remove const array that's crashing under HLSL (unless a new `naga` release with https://github.com/gfx-rs/naga/pull/2496 comes out before we merge this) - [ ] Look into alternatives to the `switch` hack for dynamically indexing the const array (might not be needed, compilers seem to be decent at expanding it) - [ ] Add pipeline keys for gating transmission (do we really want/need this?) - [x] Tweak some material field/function names? ## A Note on Texture Packing _This was originally added as a comment to the `specular_transmission_texture`, `thickness_texture` and `diffuse_transmission_texture` documentation, I removed it since it was more confusing than helpful, and will likely be made redundant/will need to be updated once we have a better infrastructure for preprocessing assets_ Due to how channels are mapped, you can more efficiently use a single shared texture image for configuring the following: - R - `specular_transmission_texture` - G - `thickness_texture` - B - _unused_ - A - `diffuse_transmission_texture` The `KHR_materials_diffuse_transmission` glTF extension also defines a `diffuseTransmissionColorTexture`, that _we don't currently support_. One might choose to pack the intensity and color textures together, using RGB for the color and A for the intensity, in which case this packing advice doesn't really apply. --- ## Changelog - Added a new `Transmissive3d` render phase for rendering specular transmissive materials with screen space refractions - Added rendering support for transmitted environment map light on the `StandardMaterial` as a fallback for screen space refractions - Added `diffuse_transmission`, `specular_transmission`, `thickness`, `ior`, `attenuation_distance` and `attenuation_color` to the `StandardMaterial` - Added `diffuse_transmission_texture`, `specular_transmission_texture`, `thickness_texture` to the `StandardMaterial`, gated behind a new `pbr_transmission_textures` cargo feature (off by default, for maximum hardware compatibility) - Added `Camera3d::screen_space_specular_transmission_steps` for controlling the number of “layers of transparency” rendered for transmissive objects - Added a `TransmittedShadowReceiver` component for enabling shadows in (diffusely) transmitted light. (disabled by default, as it requires carefully setting up the `thickness` to avoid self-shadow artifacts) - Added support for the `KHR_materials_transmission`, `KHR_materials_ior` and `KHR_materials_volume` glTF extensions - Renamed items related to temporal jitter for greater consistency ## Migration Guide - `SsaoPipelineKey::temporal_noise` has been renamed to `SsaoPipelineKey::temporal_jitter` - The `TAA` shader def (controlled by the presence of the `TemporalAntiAliasSettings` component in the camera) has been replaced with the `TEMPORAL_JITTER` shader def (controlled by the presence of the `TemporalJitter` component in the camera) - `MeshPipelineKey::TAA` has been replaced by `MeshPipelineKey::TEMPORAL_JITTER` - The `TEMPORAL_NOISE` shader def has been consolidated with `TEMPORAL_JITTER`	2023-10-31 20:59:02 +00:00
SecretPocketCat	08248126f0	Example time api (#10204) ... # Objective - Fixes #10133 ## Solution - Add a new example that focuses on using `Virtual` time ## Changelog ### Added - new `virtual_time` example ### Changed - moved `time` & `timers` examples to the new `examples/time` folder	2023-10-28 16:05:03 +00:00
Niklas Eicker	317903f42a	Reduce noise in asset processing example (#10262) ... # Objective - Reduce noise to allow users to see previous asset changes and other logs like from asset reloading - The example file is named differently than the example ## Solution - Only print the asset content if there are asset events - Rename the example file to `asset_processing`	2023-10-25 19:37:03 +00:00
Martín Maita	0dc7e60d0e	Improve WebGPU unstable flags docs (#10163) ... # Objective - Fixes #9382 ## Solution - Added a few extra notes in regards to WebGPU experimental state and the need of enabling unstable APIs through certain attribute flags in `cargo_features.md` and the examples `README.md` files.	2023-10-18 17:30:44 +00:00
robtfm	c99351f7c2	allow extensions to StandardMaterial (#7820) ... # Objective allow extending `Material`s (including the built in `StandardMaterial`) with custom vertex/fragment shaders and additional data, to easily get pbr lighting with custom modifications, or otherwise extend a base material. # Solution - added `ExtendedMaterial<B: Material, E: MaterialExtension>` which contains a base material and a user-defined extension. - added example `extended_material` showing how to use it - modified AsBindGroup to have "unprepared" functions that return raw resources / layout entries so that the extended material can combine them note: doesn't currently work with array resources, as i can't figure out how to make the OwnedBindingResource::get_binding() work, as wgpu requires a `&'a[&'a TextureView]` and i have a `Vec<TextureView>`. # Migration Guide manual implementations of `AsBindGroup` will need to be adjusted, the changes are pretty straightforward and can be seen in the diff for e.g. the `texture_binding_array` example. --------- Co-authored-by: Robert Swain <robert.swain@gmail.com>	2023-10-17 21:28:08 +00:00
Nuutti Kotivuori	3d79dc4cdc	Unify FixedTime and Time while fixing several problems (#8964) ... # Objective Current `FixedTime` and `Time` have several problems. This pull aims to fix many of them at once. - If there is a longer pause between app updates, time will jump forward a lot at once and fixed time will iterate on `FixedUpdate` for a large number of steps. If the pause is merely seconds, then this will just mean jerkiness and possible unexpected behaviour in gameplay. If the pause is hours/days as with OS suspend, the game will appear to freeze until it has caught up with real time. - If calculating a fixed step takes longer than specified fixed step period, the game will enter a death spiral where rendering each frame takes longer and longer due to more and more fixed step updates being run per frame and the game appears to freeze. - There is no way to see current fixed step elapsed time inside fixed steps. In order to track this, the game designer needs to add a custom system inside `FixedUpdate` that calculates elapsed or step count in a resource. - Access to delta time inside fixed step is `FixedStep::period` rather than `Time::delta`. This, coupled with the issue that `Time::elapsed` isn't available at all for fixed steps, makes it that time requiring systems are either implemented to be run in `FixedUpdate` or `Update`, but rarely work in both. - Fixes #8800 - Fixes #8543 - Fixes #7439 - Fixes #5692 ## Solution - Create a generic `Time<T>` clock that has no processing logic but which can be instantiated for multiple usages. This is also exposed for users to add custom clocks. - Create three standard clocks, `Time<Real>`, `Time<Virtual>` and `Time<Fixed>`, all of which contain their individual logic. - Create one "default" clock, which is just `Time` (or `Time<()>`), which will be overwritten from `Time<Virtual>` on each update, and `Time<Fixed>` inside `FixedUpdate` schedule. This way systems that do not care specifically which time they track can work both in `Update` and `FixedUpdate` without changes and the behaviour is intuitive. - Add `max_delta` to virtual time update, which limits how much can be added to virtual time by a single update. This fixes both the behaviour after a long freeze, and also the death spiral by limiting how many fixed timestep iterations there can be per update. Possible future work could be adding `max_accumulator` to add a sort of "leaky bucket" time processing to possibly smooth out jumps in time while keeping frame rate stable. - Many minor tweaks and clarifications to the time functions and their documentation. ## Changelog - `Time::raw_delta()`, `Time::raw_elapsed()` and related methods are moved to `Time<Real>::delta()` and `Time<Real>::elapsed()` and now match `Time` API - `FixedTime` is now `Time<Fixed>` and matches `Time` API. - `Time<Fixed>` default timestep is now 64 Hz, or 15625 microseconds. - `Time` inside `FixedUpdate` now reflects fixed timestep time, making systems portable between `Update ` and `FixedUpdate`. - `Time::pause()`, `Time::set_relative_speed()` and related methods must now be called as `Time<Virtual>::pause()` etc. - There is a new `max_delta` setting in `Time<Virtual>` that limits how much the clock can jump by a single update. The default value is 0.25 seconds. - Removed `on_fixed_timer()` condition as `on_timer()` does the right thing inside `FixedUpdate` now. ## Migration Guide - Change all `Res<Time>` instances that access `raw_delta()`, `raw_elapsed()` and related methods to `Res<Time<Real>>` and `delta()`, `elapsed()`, etc. - Change access to `period` from `Res<FixedTime>` to `Res<Time<Fixed>>` and use `delta()`. - The default timestep has been changed from 60 Hz to 64 Hz. If you wish to restore the old behaviour, use `app.insert_resource(Time::<Fixed>::from_hz(60.0))`. - Change `app.insert_resource(FixedTime::new(duration))` to `app.insert_resource(Time::<Fixed>::from_duration(duration))` - Change `app.insert_resource(FixedTime::new_from_secs(secs))` to `app.insert_resource(Time::<Fixed>::from_seconds(secs))` - Change `system.on_fixed_timer(duration)` to `system.on_timer(duration)`. Timers in systems placed in `FixedUpdate` schedule automatically use the fixed time clock. - Change `ResMut<Time>` calls to `pause()`, `is_paused()`, `set_relative_speed()` and related methods to `ResMut<Time<Virtual>>` calls. The API is the same, with the exception that `relative_speed()` will return the actual last ste relative speed, while `effective_relative_speed()` returns 0.0 if the time is paused and corresponds to the speed that was set when the update for the current frame started. ## Todo - [x] Update pull name and description - [x] Top level documentation on usage - [x] Fix examples - [x] Decide on default `max_delta` value - [x] Decide naming of the three clocks: is `Real`, `Virtual`, `Fixed` good? - [x] Decide if the three clock inner structures should be in prelude - [x] Decide on best way to configure values at startup: is manually inserting a new clock instance okay, or should there be config struct separately? - [x] Fix links in docs - [x] Decide what should be public and what not - [x] Decide how `wrap_period` should be handled when it is changed - [x] ~~Add toggles to disable setting the clock as default?~~ No, separate pull if needed. - [x] Add tests - [x] Reformat, ensure adheres to conventions etc. - [x] Build documentation and see that it looks correct ## Contributors Huge thanks to @alice-i-cecile and @maniwani while building this pull. It was a shared effort! --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Cameron <51241057+maniwani@users.noreply.github.com> Co-authored-by: Jerome Humbert <djeedai@gmail.com>	2023-10-16 01:57:55 +00:00
Griffin	a15d152635	Deferred Renderer (#9258) ... # Objective - Add a [Deferred Renderer](https://en.wikipedia.org/wiki/Deferred_shading) to Bevy. - This allows subsequent passes to access per pixel material information before/during shading. - Accessing this per pixel material information is needed for some features, like GI. It also makes other features (ex. Decals) simpler to implement and/or improves their capability. There are multiple approaches to accomplishing this. The deferred shading approach works well given the limitations of WebGPU and WebGL2. Motivation: [I'm working on a GI solution for Bevy](https://youtu.be/eH1AkL-mwhI) # Solution - The deferred renderer is implemented with a prepass and a deferred lighting pass. - The prepass renders opaque objects into the Gbuffer attachment (`Rgba32Uint`). The PBR shader generates a `PbrInput` in mostly the same way as the forward implementation and then [packs it into the Gbuffer](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L168)). - The deferred lighting pass unpacks the `PbrInput` and [feeds it into the pbr() function](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L65)), then outputs the shaded color data. - There is now a resource [DefaultOpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L599)) that can be used to set the default render method for opaque materials. If materials return `None` from [opaque_render_method()](ec1465559f/crates/bevy_pbr/src/material.rs (L131)) the `DefaultOpaqueRendererMethod` will be used. Otherwise, custom materials can also explicitly choose to only support Deferred or Forward by returning the respective [OpaqueRendererMethod](ec1465559f/crates/bevy_pbr/src/material.rs (L603)) - Deferred materials can be used seamlessly along with both opaque and transparent forward rendered materials in the same scene. The [deferred rendering example](https://github.com/DGriffin91/bevy/blob/deferred/examples/3d/deferred_rendering.rs) does this. - The deferred renderer does not support MSAA. If any deferred materials are used, MSAA must be disabled. Both TAA and FXAA are supported. - Deferred rendering supports WebGL2/WebGPU. ## Custom deferred materials - Custom materials can support both deferred and forward at the same time. The [StandardMaterial](ec1465559f/crates/bevy_pbr/src/render/pbr.wgsl (L166)) does this. So does [this example](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56). - Custom deferred materials that require PBR lighting can create a `PbrInput`, write it to the deferred GBuffer and let it be rendered by the `PBRDeferredLightingPlugin`. - Custom deferred materials that require custom lighting have two options: 1. Use the base_color channel of the `PbrInput` combined with the `STANDARD_MATERIAL_FLAGS_UNLIT_BIT` flag. [Example.](https://github.com/DGriffin91/bevy_glowy_orb_tutorial/blob/deferred/assets/shaders/glowy.wgsl#L56) (If the unlit bit is set, the base_color is stored as RGB9E5 for extra precision) 2. A Custom Deferred Lighting pass can be created, either overriding the default, or running in addition. The a depth buffer is used to limit rendering to only the required fragments for each deferred lighting pass. Materials can set their respective depth id via the [deferred_lighting_pass_id](b79182d2a3/crates/bevy_pbr/src/prepass/prepass_io.wgsl (L95)) attachment. The custom deferred lighting pass plugin can then set [its corresponding depth](ec1465559f/crates/bevy_pbr/src/deferred/deferred_lighting.wgsl (L37)). Then with the lighting pass using [CompareFunction::Equal](ec1465559f/crates/bevy_pbr/src/deferred/mod.rs (L335)), only the fragments with a depth that equal the corresponding depth written in the material will be rendered. Custom deferred lighting plugins can also be created to render the StandardMaterial. The default deferred lighting plugin can be bypassed with `DefaultPlugins.set(PBRDeferredLightingPlugin { bypass: true })` --------- Co-authored-by: nickrart <nickolas.g.russell@gmail.com>	2023-10-12 22:10:38 +00:00
Rob Parrett	7063c86ed4	Fix some typos (#9934) ... # Objective To celebrate the turning of the seasons, I took a small walk through the codebase guided by the "[code spell checker](https://marketplace.visualstudio.com/items?itemName=streetsidesoftware.code-spell-checker)" VS Code extension and fixed a few typos.	2023-09-26 19:46:24 +00:00
Trashtalk217	e4b368721d	One Shot Systems (#8963) ... I'm adopting this ~~child~~ PR. # Objective - Working with exclusive world access is not always easy: in many cases, a standard system or three is more ergonomic to write, and more modularly maintainable. - For small, one-off tasks (commonly handled with scripting), running an event-reader system incurs a small but flat overhead cost and muddies the schedule. - Certain forms of logic (e.g. turn-based games) want very fine-grained linear and/or branching control over logic. - SystemState is not automatically cached, and so performance can suffer and change detection breaks. - Fixes https://github.com/bevyengine/bevy/issues/2192. - Partial workaround for https://github.com/bevyengine/bevy/issues/279. ## Solution - Adds a SystemRegistry resource to the World, which stores initialized systems keyed by their SystemSet. - Allows users to call world.run_system(my_system) and commands.run_system(my_system), without re-initializing or losing state (essential for change detection). - Add a Callback type to enable convenient use of dynamic one shot systems and reduce the mental overhead of working with Box<dyn SystemSet>. - Allow users to run systems based on their SystemSet, enabling more complex user-made abstractions. ## Future work - Parameterized one-shot systems would improve reusability and bring them closer to events and commands. The API could be something like run_system_with_input(my_system, my_input) and use the In SystemParam. - We should evaluate the unification of commands and one-shot systems since they are two different ways to run logic on demand over a World. ### Prior attempts - https://github.com/bevyengine/bevy/pull/2234 - https://github.com/bevyengine/bevy/pull/2417 - https://github.com/bevyengine/bevy/pull/4090 - https://github.com/bevyengine/bevy/pull/7999 This PR continues the work done in https://github.com/bevyengine/bevy/pull/7999. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Federico Rinaldi <gisquerin@gmail.com> Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com> Co-authored-by: Aevyrie <aevyrie@gmail.com> Co-authored-by: Alejandro Pascual Pozo <alejandro.pascual.pozo@gmail.com> Co-authored-by: Rob Parrett <robparrett@gmail.com> Co-authored-by: François <mockersf@gmail.com> Co-authored-by: Dmytro Banin <banind@cs.washington.edu> Co-authored-by: James Liu <contact@jamessliu.com>	2023-09-19 20:17:05 +00:00
ira	f3ab38a802	Add example for Camera::viewport_to_world (#7179) ... Fixes #7177 --------- Co-authored-by: Rob Parrett <robparrett@gmail.com>	2023-09-11 18:52:11 +00:00
Carter Anderson	5eb292dc10	Bevy Asset V2 (#8624) ... # Bevy Asset V2 Proposal ## Why Does Bevy Need A New Asset System? Asset pipelines are a central part of the gamedev process. Bevy's current asset system is missing a number of features that make it non-viable for many classes of gamedev. After plenty of discussions and [a long community feedback period](https://github.com/bevyengine/bevy/discussions/3972), we've identified a number missing features: * **Asset Preprocessing**: it should be possible to "preprocess" / "compile" / "crunch" assets at "development time" rather than when the game starts up. This enables offloading expensive work from deployed apps, faster asset loading, less runtime memory usage, etc. * **Per-Asset Loader Settings**: Individual assets cannot define their own loaders that override the defaults. Additionally, they cannot provide per-asset settings to their loaders. This is a huge limitation, as many asset types don't provide all information necessary for Bevy _inside_ the asset. For example, a raw PNG image says nothing about how it should be sampled (ex: linear vs nearest). * **Asset `.meta` files**: assets should have configuration files stored adjacent to the asset in question, which allows the user to configure asset-type-specific settings. These settings should be accessible during the pre-processing phase. Modifying a `.meta` file should trigger a re-processing / re-load of the asset. It should be possible to configure asset loaders from the meta file. * **Processed Asset Hot Reloading**: Changes to processed assets (or their dependencies) should result in re-processing them and re-loading the results in live Bevy Apps. * **Asset Dependency Tracking**: The current bevy_asset has no good way to wait for asset dependencies to load. It punts this as an exercise for consumers of the loader apis, which is unreasonable and error prone. There should be easy, ergonomic ways to wait for assets to load and block some logic on an asset's entire dependency tree loading. * **Runtime Asset Loading**: it should be (optionally) possible to load arbitrary assets dynamically at runtime. This necessitates being able to deploy and run the asset server alongside Bevy Apps on _all platforms_. For example, we should be able to invoke the shader compiler at runtime, stream scenes from sources like the internet, etc. To keep deployed binaries (and startup times) small, the runtime asset server configuration should be configurable with different settings compared to the "pre processor asset server". * **Multiple Backends**: It should be possible to load assets from arbitrary sources (filesystems, the internet, remote asset serves, etc). * **Asset Packing**: It should be possible to deploy assets in compressed "packs", which makes it easier and more efficient to distribute assets with Bevy Apps. * **Asset Handoff**: It should be possible to hold a "live" asset handle, which correlates to runtime data, without actually holding the asset in memory. Ex: it must be possible to hold a reference to a GPU mesh generated from a "mesh asset" without keeping the mesh data in CPU memory * **Per-Platform Processed Assets**: Different platforms and app distributions have different capabilities and requirements. Some platforms need lower asset resolutions or different asset formats to operate within the hardware constraints of the platform. It should be possible to define per-platform asset processing profiles. And it should be possible to deploy only the assets required for a given platform. These features have architectural implications that are significant enough to require a full rewrite. The current Bevy Asset implementation got us this far, but it can take us no farther. This PR defines a brand new asset system that implements most of these features, while laying the foundations for the remaining features to be built. ## Bevy Asset V2 Here is a quick overview of the features introduced in this PR. * **Asset Preprocessing**: Preprocess assets at development time into more efficient (and configurable) representations * **Dependency Aware**: Dependencies required to process an asset are tracked. If an asset's processed dependency changes, it will be reprocessed * **Hot Reprocessing/Reloading**: detect changes to asset source files, reprocess them if they have changed, and then hot-reload them in Bevy Apps. * **Only Process Changes**: Assets are only re-processed when their source file (or meta file) has changed. This uses hashing and timestamps to avoid processing assets that haven't changed. * **Transactional and Reliable**: Uses write-ahead logging (a technique commonly used by databases) to recover from crashes / forced-exits. Whenever possible it avoids full-reprocessing / only uncompleted transactions will be reprocessed. When the processor is running in parallel with a Bevy App, processor asset writes block Bevy App asset reads. Reading metadata + asset bytes is guaranteed to be transactional / correctly paired. * **Portable / Run anywhere / Database-free**: The processor does not rely on an in-memory database (although it uses some database techniques for reliability). This is important because pretty much all in-memory databases have unsupported platforms or build complications. * **Configure Processor Defaults Per File Type**: You can say "use this processor for all files of this type". * **Custom Processors**: The `Processor` trait is flexible and unopinionated. It can be implemented by downstream plugins. * **LoadAndSave Processors**: Most asset processing scenarios can be expressed as "run AssetLoader A, save the results using AssetSaver X, and then load the result using AssetLoader B". For example, load this png image using `PngImageLoader`, which produces an `Image` asset and then save it using `CompressedImageSaver` (which also produces an `Image` asset, but in a compressed format), which takes an `Image` asset as input. This means if you have an `AssetLoader` for an asset, you are already half way there! It also means that you can share AssetSavers across multiple loaders. Because `CompressedImageSaver` accepts Bevy's generic Image asset as input, it means you can also use it with some future `JpegImageLoader`. * **Loader and Saver Settings**: Asset Loaders and Savers can now define their own settings types, which are passed in as input when an asset is loaded / saved. Each asset can define its own settings. * **Asset `.meta` files**: configure asset loaders, their settings, enable/disable processing, and configure processor settings * **Runtime Asset Dependency Tracking** Runtime asset dependencies (ex: if an asset contains a `Handle<Image>`) are tracked by the asset server. An event is emitted when an asset and all of its dependencies have been loaded * **Unprocessed Asset Loading**: Assets do not require preprocessing. They can be loaded directly. A processed asset is just a "normal" asset with some extra metadata. Asset Loaders don't need to know or care about whether or not an asset was processed. * **Async Asset IO**: Asset readers/writers use async non-blocking interfaces. Note that because Rust doesn't yet support async traits, there is a bit of manual Boxing / Future boilerplate. This will hopefully be removed in the near future when Rust gets async traits. * **Pluggable Asset Readers and Writers**: Arbitrary asset source readers/writers are supported, both by the processor and the asset server. * **Better Asset Handles** * **Single Arc Tree**: Asset Handles now use a single arc tree that represents the lifetime of the asset. This makes their implementation simpler, more efficient, and allows us to cheaply attach metadata to handles. Ex: the AssetPath of a handle is now directly accessible on the handle itself! * **Const Typed Handles**: typed handles can be constructed in a const context. No more weird "const untyped converted to typed at runtime" patterns! * **Handles and Ids are Smaller / Faster To Hash / Compare**: Typed `Handle<T>` is now much smaller in memory and `AssetId<T>` is even smaller. * **Weak Handle Usage Reduction**: In general Handles are now considered to be "strong". Bevy features that previously used "weak `Handle<T>`" have been ported to `AssetId<T>`, which makes it statically clear that the features do not hold strong handles (while retaining strong type information). Currently Handle::Weak still exists, but it is very possible that we can remove that entirely. * **Efficient / Dense Asset Ids**: Assets now have efficient dense runtime asset ids, which means we can avoid expensive hash lookups. Assets are stored in Vecs instead of HashMaps. There are now typed and untyped ids, which means we no longer need to store dynamic type information in the ID for typed handles. "AssetPathId" (which was a nightmare from a performance and correctness standpoint) has been entirely removed in favor of dense ids (which are retrieved for a path on load) * **Direct Asset Loading, with Dependency Tracking**: Assets that are defined at runtime can still have their dependencies tracked by the Asset Server (ex: if you create a material at runtime, you can still wait for its textures to load). This is accomplished via the (currently optional) "asset dependency visitor" trait. This system can also be used to define a set of assets to load, then wait for those assets to load. * **Async folder loading**: Folder loading also uses this system and immediately returns a handle to the LoadedFolder asset, which means folder loading no longer blocks on directory traversals. * **Improved Loader Interface**: Loaders now have a specific "top level asset type", which makes returning the top-level asset simpler and statically typed. * **Basic Image Settings and Processing**: Image assets can now be processed into the gpu-friendly Basic Universal format. The ImageLoader now has a setting to define what format the image should be loaded as. Note that this is just a minimal MVP ... plenty of additional work to do here. To demo this, enable the `basis-universal` feature and turn on asset processing. * **Simpler Audio Play / AudioSink API**: Asset handle providers are cloneable, which means the Audio resource can mint its own handles. This means you can now do `let sink_handle = audio.play(music)` instead of `let sink_handle = audio_sinks.get_handle(audio.play(music))`. Note that this might still be replaced by https://github.com/bevyengine/bevy/pull/8424. **Removed Handle Casting From Engine Features**: Ex: FontAtlases no longer use casting between handle types ## Using The New Asset System ### Normal Unprocessed Asset Loading By default the `AssetPlugin` does not use processing. It behaves pretty much the same way as the old system. If you are defining a custom asset, first derive `Asset`: ```rust #[derive(Asset)] struct Thing { value: String, } ``` Initialize the asset: ```rust app.init_asset:<Thing>() ``` Implement a new `AssetLoader` for it: ```rust #[derive(Default)] struct ThingLoader; #[derive(Serialize, Deserialize, Default)] pub struct ThingSettings { some_setting: bool, } impl AssetLoader for ThingLoader { type Asset = Thing; type Settings = ThingSettings; fn load<'a>( &'a self, reader: &'a mut Reader, settings: &'a ThingSettings, load_context: &'a mut LoadContext, ) -> BoxedFuture<'a, Result<Thing, anyhow::Error>> { Box::pin(async move { let mut bytes = Vec::new(); reader.read_to_end(&mut bytes).await?; // convert bytes to value somehow Ok(Thing { value }) }) } fn extensions(&self) -> &[&str] { &["thing"] } } ``` Note that this interface will get much cleaner once Rust gets support for async traits. `Reader` is an async futures_io::AsyncRead. You can stream bytes as they come in or read them all into a `Vec<u8>`, depending on the context. You can use `let handle = load_context.load(path)` to kick off a dependency load, retrieve a handle, and register the dependency for the asset. Then just register the loader in your Bevy app: ```rust app.init_asset_loader::<ThingLoader>() ``` Now just add your `Thing` asset files into the `assets` folder and load them like this: ```rust fn system(asset_server: Res<AssetServer>) { let handle = Handle<Thing> = asset_server.load("cool.thing"); } ``` You can check load states directly via the asset server: ```rust if asset_server.load_state(&handle) == LoadState::Loaded { } ``` You can also listen for events: ```rust fn system(mut events: EventReader<AssetEvent<Thing>>, handle: Res<SomeThingHandle>) { for event in events.iter() { if event.is_loaded_with_dependencies(&handle) { } } } ``` Note the new `AssetEvent::LoadedWithDependencies`, which only fires when the asset is loaded _and_ all dependencies (and their dependencies) have loaded. Unlike the old asset system, for a given asset path all `Handle<T>` values point to the same underlying Arc. This means Handles can cheaply hold more asset information, such as the AssetPath: ```rust // prints the AssetPath of the handle info!("{:?}", handle.path()) ``` ### Processed Assets Asset processing can be enabled via the `AssetPlugin`. When developing Bevy Apps with processed assets, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev())) ``` This runs the `AssetProcessor` in the background with hot-reloading. It reads assets from the `assets` folder, processes them, and writes them to the `.imported_assets` folder. Asset loads in the Bevy App will wait for a processed version of the asset to become available. If an asset in the `assets` folder changes, it will be reprocessed and hot-reloaded in the Bevy App. When deploying processed Bevy apps, do this: ```rust app.add_plugins(DefaultPlugins.set(AssetPlugin::processed())) ``` This does not run the `AssetProcessor` in the background. It behaves like `AssetPlugin::unprocessed()`, but reads assets from `.imported_assets`. When the `AssetProcessor` is running, it will populate sibling `.meta` files for assets in the `assets` folder. Meta files for assets that do not have a processor configured look like this: ```rust ( meta_format_version: "1.0", asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` This is metadata for an image asset. For example, if you have `assets/my_sprite.png`, this could be the metadata stored at `assets/my_sprite.png.meta`. Meta files are totally optional. If no metadata exists, the default settings will be used. In short, this file says "load this asset with the ImageLoader and use the file extension to determine the image type". This type of meta file is supported in all AssetPlugin modes. If in `Unprocessed` mode, the asset (with the meta settings) will be loaded directly. If in `ProcessedDev` mode, the asset file will be copied directly to the `.imported_assets` folder. The meta will also be copied directly to the `.imported_assets` folder, but with one addition: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 12415480888597742505, full_hash: 14344495437905856884, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: FromExtension, ), ), ) ``` `processed_info` contains `hash` (a direct hash of the asset and meta bytes), `full_hash` (a hash of `hash` and the hashes of all `process_dependencies`), and `process_dependencies` (the `path` and `full_hash` of every process_dependency). A "process dependency" is an asset dependency that is _directly_ used when processing the asset. Images do not have process dependencies, so this is empty. When the processor is enabled, you can use the `Process` metadata config: ```rust ( meta_format_version: "1.0", asset: Process( processor: "bevy_asset::processor::process::LoadAndSave<bevy_render::texture::image_loader::ImageLoader, bevy_render::texture::compressed_image_saver::CompressedImageSaver>", settings: ( loader_settings: ( format: FromExtension, ), saver_settings: ( generate_mipmaps: true, ), ), ), ) ``` This configures the asset to use the `LoadAndSave` processor, which runs an AssetLoader and feeds the result into an AssetSaver (which saves the given Asset and defines a loader to load it with). (for terseness LoadAndSave will likely get a shorter/friendlier type name when [Stable Type Paths](#7184) lands). `LoadAndSave` is likely to be the most common processor type, but arbitrary processors are supported. `CompressedImageSaver` saves an `Image` in the Basis Universal format and configures the ImageLoader to load it as basis universal. The `AssetProcessor` will read this meta, run it through the LoadAndSave processor, and write the basis-universal version of the image to `.imported_assets`. The final metadata will look like this: ```rust ( meta_format_version: "1.0", processed_info: Some(( hash: 905599590923828066, full_hash: 9948823010183819117, process_dependencies: [], )), asset: Load( loader: "bevy_render::texture::image_loader::ImageLoader", settings: ( format: Format(Basis), ), ), ) ``` To try basis-universal processing out in Bevy examples, (for example `sprite.rs`), change `add_plugins(DefaultPlugins)` to `add_plugins(DefaultPlugins.set(AssetPlugin::processed_dev()))` and run with the `basis-universal` feature enabled: `cargo run --features=basis-universal --example sprite`. To create a custom processor, there are two main paths: 1. Use the `LoadAndSave` processor with an existing `AssetLoader`. Implement the `AssetSaver` trait, register the processor using `asset_processor.register_processor::<LoadAndSave<ImageLoader, CompressedImageSaver>>(image_saver.into())`. 2. Implement the `Process` trait directly and register it using: `asset_processor.register_processor(thing_processor)`. You can configure default processors for file extensions like this: ```rust asset_processor.set_default_processor::<ThingProcessor>("thing") ``` There is one more metadata type to be aware of: ```rust ( meta_format_version: "1.0", asset: Ignore, ) ``` This will ignore the asset during processing / prevent it from being written to `.imported_assets`. The AssetProcessor stores a transaction log at `.imported_assets/log` and uses it to gracefully recover from unexpected stops. This means you can force-quit the processor (and Bevy Apps running the processor in parallel) at arbitrary times! `.imported_assets` is "local state". It should _not_ be checked into source control. It should also be considered "read only". In practice, you _can_ modify processed assets and processed metadata if you really need to test something. But those modifications will not be represented in the hashes of the assets, so the processed state will be "out of sync" with the source assets. The processor _will not_ fix this for you. Either revert the change after you have tested it, or delete the processed files so they can be re-populated. ## Open Questions There are a number of open questions to be discussed. We should decide if they need to be addressed in this PR and if so, how we will address them: ### Implied Dependencies vs Dependency Enumeration There are currently two ways to populate asset dependencies: * **Implied via AssetLoaders**: if an AssetLoader loads an asset (and retrieves a handle), a dependency is added to the list. * **Explicit via the optional Asset::visit_dependencies**: if `server.load_asset(my_asset)` is called, it will call `my_asset.visit_dependencies`, which will grab dependencies that have been manually defined for the asset via the Asset trait impl (which can be derived). This means that defining explicit dependencies is optional for "loaded assets". And the list of dependencies is always accurate because loaders can only produce Handles if they register dependencies. If an asset was loaded with an AssetLoader, it only uses the implied dependencies. If an asset was created at runtime and added with `asset_server.load_asset(MyAsset)`, it will use `Asset::visit_dependencies`. However this can create a behavior mismatch between loaded assets and equivalent "created at runtime" assets if `Assets::visit_dependencies` doesn't exactly match the dependencies produced by the AssetLoader. This behavior mismatch can be resolved by completely removing "implied loader dependencies" and requiring `Asset::visit_dependencies` to supply dependency data. But this creates two problems: * It makes defining loaded assets harder and more error prone: Devs must remember to manually annotate asset dependencies with `#[dependency]` when deriving `Asset`. For more complicated assets (such as scenes), the derive likely wouldn't be sufficient and a manual `visit_dependencies` impl would be required. * Removes the ability to immediately kick off dependency loads: When AssetLoaders retrieve a Handle, they also immediately kick off an asset load for the handle, which means it can start loading in parallel _before_ the asset finishes loading. For large assets, this could be significant. (although this could be mitigated for processed assets if we store dependencies in the processed meta file and load them ahead of time) ### Eager ProcessorDev Asset Loading I made a controversial call in the interest of fast startup times ("time to first pixel") for the "processor dev mode configuration". When initializing the AssetProcessor, current processed versions of unchanged assets are yielded immediately, even if their dependencies haven't been checked yet for reprocessing. This means that non-current-state-of-filesystem-but-previously-valid assets might be returned to the App first, then hot-reloaded if/when their dependencies change and the asset is reprocessed. Is this behavior desirable? There is largely one alternative: do not yield an asset from the processor to the app until all of its dependencies have been checked for changes. In some common cases (load dependency has not changed since last run) this will increase startup time. The main question is "by how much" and is that slower startup time worth it in the interest of only yielding assets that are true to the current state of the filesystem. Should this be configurable? I'm starting to think we should only yield an asset after its (historical) dependencies have been checked for changes + processed as necessary, but I'm curious what you all think. ### Paths Are Currently The Only Canonical ID / Do We Want Asset UUIDs? In this implementation AssetPaths are the only canonical asset identifier (just like the previous Bevy Asset system and Godot). Moving assets will result in re-scans (and currently reprocessing, although reprocessing can easily be avoided with some changes). Asset renames/moves will break code and assets that rely on specific paths, unless those paths are fixed up. Do we want / need "stable asset uuids"? Introducing them is very possible: 1. Generate a UUID and include it in .meta files 2. Support UUID in AssetPath 3. Generate "asset indices" which are loaded on startup and map UUIDs to paths. 4 (maybe). Consider only supporting UUIDs for processed assets so we can generate quick-to-load indices instead of scanning meta files. The main "pro" is that assets referencing UUIDs don't need to be migrated when a path changes. The main "con" is that UUIDs cannot be "lazily resolved" like paths. They need a full view of all assets to answer the question "does this UUID exist". Which means UUIDs require the AssetProcessor to fully finish startup scans before saying an asset doesnt exist. And they essentially require asset pre-processing to use in apps, because scanning all asset metadata files at runtime to resolve a UUID is not viable for medium-to-large apps. It really requires a pre-generated UUID index, which must be loaded before querying for assets. I personally think this should be investigated in a separate PR. Paths aren't going anywhere ... _everyone_ uses filesystems (and filesystem-like apis) to manage their asset source files. I consider them permanent canonical asset information. Additionally, they behave well for both processed and unprocessed asset modes. Given that Bevy is supporting both, this feels like the right canonical ID to start with. UUIDS (and maybe even other indexed-identifier types) can be added later as necessary. ### Folder / File Naming Conventions All asset processing config currently lives in the `.imported_assets` folder. The processor transaction log is in `.imported_assets/log`. Processed assets are added to `.imported_assets/Default`, which will make migrating to processed asset profiles (ex: a `.imported_assets/Mobile` profile) a non-breaking change. It also allows us to create top-level files like `.imported_assets/log` without it being interpreted as an asset. Meta files currently have a `.meta` suffix. Do we like these names and conventions? ### Should the `AssetPlugin::processed_dev` configuration enable `watch_for_changes` automatically? Currently it does (which I think makes sense), but it does make it the only configuration that enables watch_for_changes by default. ### Discuss on_loaded High Level Interface: This PR includes a very rough "proof of concept" `on_loaded` system adapter that uses the `LoadedWithDependencies` event in combination with `asset_server.load_asset` dependency tracking to support this pattern ```rust fn main() { App::new() .init_asset::<MyAssets>() .add_systems(Update, on_loaded(create_array_texture)) .run(); } #[derive(Asset, Clone)] struct MyAssets { #[dependency] picture_of_my_cat: Handle<Image>, #[dependency] picture_of_my_other_cat: Handle<Image>, } impl FromWorld for ArrayTexture { fn from_world(world: &mut World) -> Self { picture_of_my_cat: server.load("meow.png"), picture_of_my_other_cat: server.load("meeeeeeeow.png"), } } fn spawn_cat(In(my_assets): In<MyAssets>, mut commands: Commands) { commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_cat.clone(), ..default() }); commands.spawn(SpriteBundle { texture: my_assets.picture_of_my_other_cat.clone(), ..default() }); } ``` The implementation is _very_ rough. And it is currently unsafe because `bevy_ecs` doesn't expose some internals to do this safely from inside `bevy_asset`. There are plenty of unanswered questions like: * "do we add a Loadable" derive? (effectively automate the FromWorld implementation above) * Should `MyAssets` even be an Asset? (largely implemented this way because it elegantly builds on `server.load_asset(MyAsset { .. })` dependency tracking). We should think hard about what our ideal API looks like (and if this is a pattern we want to support). Not necessarily something we need to solve in this PR. The current `on_loaded` impl should probably be removed from this PR before merging. ## Clarifying Questions ### What about Assets as Entities? This Bevy Asset V2 proposal implementation initially stored Assets as ECS Entities. Instead of `AssetId<T>` + the `Assets<T>` resource it used `Entity` as the asset id and Asset values were just ECS components. There are plenty of compelling reasons to do this: 1. Easier to inline assets in Bevy Scenes (as they are "just" normal entities + components) 2. More flexible queries: use the power of the ECS to filter assets (ex: `Query<Mesh, With<Tree>>`). 3. Extensible. Users can add arbitrary component data to assets. 4. Things like "component visualization tools" work out of the box to visualize asset data. However Assets as Entities has a ton of caveats right now: * We need to be able to allocate entity ids without a direct World reference (aka rework id allocator in Entities ... i worked around this in my prototypes by just pre allocating big chunks of entities) * We want asset change events in addition to ECS change tracking ... how do we populate them when mutations can come from anywhere? Do we use Changed queries? This would require iterating over the change data for all assets every frame. Is this acceptable or should we implement a new "event based" component change detection option? * Reconciling manually created assets with asset-system managed assets has some nuance (ex: are they "loaded" / do they also have that component metadata?) * "how do we handle "static" / default entity handles" (ties in to the Entity Indices discussion: https://github.com/bevyengine/bevy/discussions/8319). This is necessary for things like "built in" assets and default handles in things like SpriteBundle. * Storing asset information as a component makes it easy to "invalidate" asset state by removing the component (or forcing modifications). Ideally we have ways to lock this down (some combination of Rust type privacy and ECS validation) In practice, how we store and identify assets is a reasonably superficial change (porting off of Assets as Entities and implementing dedicated storage + ids took less than a day). So once we sort out the remaining challenges the flip should be straightforward. Additionally, I do still have "Assets as Entities" in my commit history, so we can reuse that work. I personally think "assets as entities" is a good endgame, but it also doesn't provide _significant_ value at the moment and it certainly isn't ready yet with the current state of things. ### Why not Distill? [Distill](https://github.com/amethyst/distill) is a high quality fully featured asset system built in Rust. It is very natural to ask "why not just use Distill?". It is also worth calling out that for awhile, [we planned on adopting Distill / I signed off on it](https://github.com/bevyengine/bevy/issues/708). However I think Bevy has a number of constraints that make Distill adoption suboptimal: * **Architectural Simplicity:** * Distill's processor requires an in-memory database (lmdb) and RPC networked API (using Cap'n Proto). Each of these introduces API complexity that increases maintenance burden and "code grokability". Ignoring tests, documentation, and examples, Distill has 24,237 lines of Rust code (including generated code for RPC + database interactions). If you ignore generated code, it has 11,499 lines. * Bevy builds the AssetProcessor and AssetServer using pluggable AssetReader/AssetWriter Rust traits with simple io interfaces. They do not necessitate databases or RPC interfaces (although Readers/Writers could use them if that is desired). Bevy Asset V2 (at the time of writing this PR) is 5,384 lines of Rust code (ignoring tests, documentation, and examples). Grain of salt: Distill does have more features currently (ex: Asset Packing, GUIDS, remote-out-of-process asset processor). I do plan to implement these features in Bevy Asset V2 and I personally highly doubt they will meaningfully close the 6115 lines-of-code gap. * This complexity gap (which while illustrated by lines of code, is much bigger than just that) is noteworthy to me. Bevy should be hackable and there are pillars of Distill that are very hard to understand and extend. This is a matter of opinion (and Bevy Asset V2 also has complicated areas), but I think Bevy Asset V2 is much more approachable for the average developer. * Necessary disclaimer: counting lines of code is an extremely rough complexity metric. Read the code and form your own opinions. * **Optional Asset Processing:** Not all Bevy Apps (or Bevy App developers) need / want asset preprocessing. Processing increases the complexity of the development environment by introducing things like meta files, imported asset storage, running processors in the background, waiting for processing to finish, etc. Distill _requires_ preprocessing to work. With Bevy Asset V2 processing is fully opt-in. The AssetServer isn't directly aware of asset processors at all. AssetLoaders only care about converting bytes to runtime Assets ... they don't know or care if the bytes were pre-processed or not. Processing is "elegantly" (forgive my self-congratulatory phrasing) layered on top and builds on the existing Asset system primitives. * **Direct Filesystem Access to Processed Asset State:** Distill stores processed assets in a database. This makes debugging / inspecting the processed outputs harder (either requires special tooling to query the database or they need to be "deployed" to be inspected). Bevy Asset V2, on the other hand, stores processed assets in the filesystem (by default ... this is configurable). This makes interacting with the processed state more natural. Note that both Godot and Unity's new asset system store processed assets in the filesystem. * **Portability**: Because Distill's processor uses lmdb and RPC networking, it cannot be run on certain platforms (ex: lmdb is a non-rust dependency that cannot run on the web, some platforms don't support running network servers). Bevy should be able to process assets everywhere (ex: run the Bevy Editor on the web, compile + process shaders on mobile, etc). Distill does partially mitigate this problem by supporting "streaming" assets via the RPC protocol, but this is not a full solve from my perspective. And Bevy Asset V2 can (in theory) also stream assets (without requiring RPC, although this isn't implemented yet) Note that I _do_ still think Distill would be a solid asset system for Bevy. But I think the approach in this PR is a better solve for Bevy's specific "asset system requirements". ### Doesn't async-fs just shim requests to "sync" `std::fs`? What is the point? "True async file io" has limited / spotty platform support. async-fs (and the rust async ecosystem generally ... ex Tokio) currently use async wrappers over std::fs that offload blocking requests to separate threads. This may feel unsatisfying, but it _does_ still provide value because it prevents our task pools from blocking on file system operations (which would prevent progress when there are many tasks to do, but all threads in a pool are currently blocking on file system ops). Additionally, using async APIs for our AssetReaders and AssetWriters also provides value because we can later add support for "true async file io" for platforms that support it. _And_ we can implement other "true async io" asset backends (such as networked asset io). ## Draft TODO - [x] Fill in missing filesystem event APIs: file removed event (which is expressed as dangling RenameFrom events in some cases), file/folder renamed event - [x] Assets without loaders are not moved to the processed folder. This breaks things like referenced `.bin` files for GLTFs. This should be configurable per-non-asset-type. - [x] Initial implementation of Reflect and FromReflect for Handle. The "deserialization" parity bar is low here as this only worked with static UUIDs in the old impl ... this is a non-trivial problem. Either we add a Handle::AssetPath variant that gets "upgraded" to a strong handle on scene load or we use a separate AssetRef type for Bevy scenes (which is converted to a runtime Handle on load). This deserves its own discussion in a different pr. - [x] Populate read_asset_bytes hash when run by the processor (a bit of a special case .. when run by the processor the processed meta will contain the hash so we don't need to compute it on the spot, but we don't want/need to read the meta when run by the main AssetServer) - [x] Delay hot reloading: currently filesystem events are handled immediately, which creates timing issues in some cases. For example hot reloading images can sometimes break because the image isn't finished writing. We should add a delay, likely similar to the [implementation in this PR](https://github.com/bevyengine/bevy/pull/8503). - [x] Port old platform-specific AssetIo implementations to the new AssetReader interface (currently missing Android and web) - [x] Resolve on_loaded unsafety (either by removing the API entirely or removing the unsafe) - [x] Runtime loader setting overrides - [x] Remove remaining unwraps that should be error-handled. There are number of TODOs here - [x] Pretty AssetPath Display impl - [x] Document more APIs - [x] Resolve spurious "reloading because it has changed" events (to repro run load_gltf with `processed_dev()`) - [x] load_dependency hot reloading currently only works for processed assets. If processing is disabled, load_dependency changes are not hot reloaded. - [x] Replace AssetInfo dependency load/fail counters with `loading_dependencies: HashSet<UntypedAssetId>` to prevent reloads from (potentially) breaking counters. Storing this will also enable "dependency reloaded" events (see [Next Steps](#next-steps)) - [x] Re-add filesystem watcher cargo feature gate (currently it is not optional) - [ ] Migration Guide - [ ] Changelog ## Followup TODO - [ ] Replace "eager unchanged processed asset loading" behavior with "don't returned unchanged processed asset until dependencies have been checked". - [ ] Add true `Ignore` AssetAction that does not copy the asset to the imported_assets folder. - [ ] Finish "live asset unloading" (ex: free up CPU asset memory after uploading an image to the GPU), rethink RenderAssets, and port renderer features. The `Assets` collection uses `Option<T>` for asset storage to support its removal. (1) the Option might not actually be necessary ... might be able to just remove from the collection entirely (2) need to finalize removal apis - [ ] Try replacing the "channel based" asset id recycling with something a bit more efficient (ex: we might be able to use raw atomic ints with some cleverness) - [ ] Consider adding UUIDs to processed assets (scoped just to helping identify moved assets ... not exposed to load queries ... see [Next Steps](#next-steps)) - [ ] Store "last modified" source asset and meta timestamps in processed meta files to enable skipping expensive hashing when the file wasn't changed - [ ] Fix "slow loop" handle drop fix - [ ] Migrate to TypeName - [x] Handle "loader preregistration". See #9429 ## Next Steps * **Configurable per-type defaults for AssetMeta**: It should be possible to add configuration like "all png image meta should default to using nearest sampling" (currently this hard-coded per-loader/processor Settings::default() impls). Also see the "Folder Meta" bullet point. * **Avoid Reprocessing on Asset Renames / Moves**: See the "canonical asset ids" discussion in [Open Questions](#open-questions) and the relevant bullet point in [Draft TODO](#draft-todo). Even without canonical ids, folder renames could avoid reprocessing in some cases. * **Multiple Asset Sources**: Expand AssetPath to support "asset source names" and support multiple AssetReaders in the asset server (ex: `webserver://some_path/image.png` backed by an Http webserver AssetReader). The "default" asset reader would use normal `some_path/image.png` paths. Ideally this works in combination with multiple AssetWatchers for hot-reloading * **Stable Type Names**: this pr removes the TypeUuid requirement from assets in favor of `std::any::type_name`. This makes defining assets easier (no need to generate a new uuid / use weird proc macro syntax). It also makes reading meta files easier (because things have "friendly names"). We also use type names for components in scene files. If they are good enough for components, they are good enough for assets. And consistency across Bevy pillars is desirable. However, `std::any::type_name` is not guaranteed to be stable (although in practice it is). We've developed a [stable type path](https://github.com/bevyengine/bevy/pull/7184) to resolve this, which should be adopted when it is ready. * **Command Line Interface**: It should be possible to run the asset processor in a separate process from the command line. This will also require building a network-server-backed AssetReader to communicate between the app and the processor. We've been planning to build a "bevy cli" for awhile. This seems like a good excuse to build it. * **Asset Packing**: This is largely an additive feature, so it made sense to me to punt this until we've laid the foundations in this PR. * **Per-Platform Processed Assets**: It should be possible to generate assets for multiple platforms by supporting multiple "processor profiles" per asset (ex: compress with format X on PC and Y on iOS). I think there should probably be arbitrary "profiles" (which can be separate from actual platforms), which are then assigned to a given platform when generating the final asset distribution for that platform. Ex: maybe devs want a "Mobile" profile that is shared between iOS and Android. Or a "LowEnd" profile shared between web and mobile. * **Versioning and Migrations**: Assets, Loaders, Savers, and Processors need to have versions to determine if their schema is valid. If an asset / loader version is incompatible with the current version expected at runtime, the processor should be able to migrate them. I think we should try using Bevy Reflect for this, as it would allow us to load the old version as a dynamic Reflect type without actually having the old Rust type. It would also allow us to define "patches" to migrate between versions (Bevy Reflect devs are currently working on patching). The `.meta` file already has its own format version. Migrating that to new versions should also be possible. * **Real Copy-on-write AssetPaths**: Rust's actual Cow (clone-on-write type) currently used by AssetPath can still result in String clones that aren't actually necessary (cloning an Owned Cow clones the contents). Bevy's asset system requires cloning AssetPaths in a number of places, which result in actual clones of the internal Strings. This is not efficient. AssetPath internals should be reworked to exhibit truer cow-like-behavior that reduces String clones to the absolute minimum. * **Consider processor-less processing**: In theory the AssetServer could run processors "inline" even if the background AssetProcessor is disabled. If we decide this is actually desirable, we could add this. But I don't think its a priority in the short or medium term. * **Pre-emptive dependency loading**: We could encode dependencies in processed meta files, which could then be used by the Asset Server to kick of dependency loads as early as possible (prior to starting the actual asset load). Is this desirable? How much time would this save in practice? * **Optimize Processor With UntypedAssetIds**: The processor exclusively uses AssetPath to identify assets currently. It might be possible to swap these out for UntypedAssetIds in some places, which are smaller / cheaper to hash and compare. * **One to Many Asset Processing**: An asset source file that produces many assets currently must be processed into a single "processed" asset source. If labeled assets can be written separately they can each have their own configured savers _and_ they could be loaded more granularly. Definitely worth exploring! * **Automatically Track "Runtime-only" Asset Dependencies**: Right now, tracking "created at runtime" asset dependencies requires adding them via `asset_server.load_asset(StandardMaterial::default())`. I think with some cleverness we could also do this for `materials.add(StandardMaterial::default())`, making tracking work "everywhere". There are challenges here relating to change detection / ensuring the server is made aware of dependency changes. This could be expensive in some cases. * **"Dependency Changed" events**: Some assets have runtime artifacts that need to be re-generated when one of their dependencies change (ex: regenerate a material's bind group when a Texture needs to change). We are generating the dependency graph so we can definitely produce these events. Buuuuut generating these events will have a cost / they could be high frequency for some assets, so we might want this to be opt-in for specific cases. * **Investigate Storing More Information In Handles**: Handles can now store arbitrary information, which makes it cheaper and easier to access. How much should we move into them? Canonical asset load states (via atomics)? (`handle.is_loaded()` would be very cool). Should we store the entire asset and remove the `Assets<T>` collection? (`Arc<RwLock<Option<Image>>>`?) * **Support processing and loading files without extensions**: This is a pretty arbitrary restriction and could be supported with very minimal changes. * **Folder Meta**: It would be nice if we could define per folder processor configuration defaults (likely in a `.meta` or `.folder_meta` file). Things like "default to linear filtering for all Images in this folder". * **Replace async_broadcast with event-listener?** This might be approximately drop-in for some uses and it feels more light weight * **Support Running the AssetProcessor on the Web**: Most of the hard work is done here, but there are some easy straggling TODOs (make the transaction log an interface instead of a direct file writer so we can write a web storage backend, implement an AssetReader/AssetWriter that reads/writes to something like LocalStorage). * **Consider identifying and preventing circular dependencies**: This is especially important for "processor dependencies", as processing will silently never finish in these cases. * **Built-in/Inlined Asset Hot Reloading**: This PR regresses "built-in/inlined" asset hot reloading (previously provided by the DebugAssetServer). I'm intentionally punting this because I think it can be cleanly implemented with "multiple asset sources" by registering a "debug asset source" (ex: `debug://bevy_pbr/src/render/pbr.wgsl` asset paths) in combination with an AssetWatcher for that asset source and support for "manually loading pats with asset bytes instead of AssetReaders". The old DebugAssetServer was quite nasty and I'd love to avoid that hackery going forward. * **Investigate ways to remove double-parsing meta files**: Parsing meta files currently involves parsing once with "minimal" versions of the meta file to extract the type name of the loader/processor config, then parsing again to parse the "full" meta. This is suboptimal. We should be able to define custom deserializers that (1) assume the loader/processor type name comes first (2) dynamically looks up the loader/processor registrations to deserialize settings in-line (similar to components in the bevy scene format). Another alternative: deserialize as dynamic Reflect objects and then convert. * **More runtime loading configuration**: Support using the Handle type as a hint to select an asset loader (instead of relying on AssetPath extensions) * **More high level Processor trait implementations**: For example, it might be worth adding support for arbitrary chains of "asset transforms" that modify an in-memory asset representation between loading and saving. (ex: load a Mesh, run a `subdivide_mesh` transform, followed by a `flip_normals` transform, then save the mesh to an efficient compressed format). * **Bevy Scene Handle Deserialization**: (see the relevant [Draft TODO item](#draft-todo) for context) * **Explore High Level Load Interfaces**: See [this discussion](#discuss-on_loaded-high-level-interface) for one prototype. * **Asset Streaming**: It would be great if we could stream Assets (ex: stream a long video file piece by piece) * **ID Exchanging**: In this PR Asset Handles/AssetIds are bigger than they need to be because they have a Uuid enum variant. If we implement an "id exchanging" system that trades Uuids for "efficient runtime ids", we can cut down on the size of AssetIds, making them more efficient. This has some open design questions, such as how to spawn entities with "default" handle values (as these wouldn't have access to the exchange api in the current system). * **Asset Path Fixup Tooling**: Assets that inline asset paths inside them will break when an asset moves. The asset system provides the functionality to detect when paths break. We should build a framework that enables formats to define "path migrations". This is especially important for scene files. For editor-generated files, we should also consider using UUIDs (see other bullet point) to avoid the need to migrate in these cases. --------- Co-authored-by: BeastLe9enD <beastle9end@outlook.de> Co-authored-by: Mike <mike.hsu@gmail.com> Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>	2023-09-07 02:07:27 +00:00
Seb Ospina	e489dcc9e8	webgl feature renamed to webgl2 (#9370) ... Addresses: ```sh $ cargo build --release --example lighting --target wasm32-unknown-unknown --features webgl error: none of the selected packages contains these features: webgl, did you mean: webgl2, webp? ``` # Objective - When following the instructions for the web examples. - Document clearly the generated file `./target/wasm_example.js`, since it didn't appear on `git grep` (missing extension) ## Solution - Follow the feature rename on the docs. --------- Signed-off-by: Seb Ospina <kraige@gmail.com>	2023-08-12 21:05:36 +00:00
Василий Чай	fb9c5a6cbb	Added Pitch as an alternative sound source (#9225) ... # Objective My attempt at implementing #7515 ## Solution Added struct `Pitch` and implemented on it `Source` trait. ## Changelog ### Added - File pitch.rs to bevy_audio crate - Struct `Pitch` and type aliases for `AudioSourceBundle<Pitch>` and `SpatialAudioSourceBundle<Pitch>` - New example showing how to use `PitchBundle` ### Changed - `AudioPlugin` now adds system for `Pitch` audio --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2023-07-29 22:29:41 +00:00
Adam Kobzan	75c6641b41	Add example to demonstrate manual generation and UV mapping of 3D mesh (generate_custom_mesh) solve #4922 (#8909) ... # Objective - Fixes #4922 ## Solution - Add an example that maps a custom texture on a 3D mesh. --- ## Changelog > Added the texture itself (confirmed with mod on discord before it should be ok) to the assets folder, added to the README and Cargo.toml. --------- Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com> Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Sélène Amanita <134181069+Selene-Amanita@users.noreply.github.com>	2023-06-23 19:26:37 +00:00
Nicola Papale	c6170d48f9	Add morph targets (#8158) ... # Objective - Add morph targets to `bevy_pbr` (closes #5756) & load them from glTF - Supersedes #3722 - Fixes #6814 [Morph targets][1] (also known as shape interpolation, shape keys, or blend shapes) allow animating individual vertices with fine grained controls. This is typically used for facial expressions. By specifying multiple poses as vertex offset, and providing a set of weight of each pose, it is possible to define surprisingly realistic transitions between poses. Blending between multiple poses also allow composition. Morph targets are part of the [gltf standard][2] and are a feature of Unity and Unreal, and babylone.js, it is only natural to implement them in bevy. ## Solution This implementation of morph targets uses a 3d texture where each pixel is a component of an animated attribute. Each layer is a different target. We use a 2d texture for each target, because the number of attribute×components×animated vertices is expected to always exceed the maximum pixel row size limit of webGL2. It copies fairly closely the way skinning is implemented on the CPU side, while on the GPU side, the shader morph target implementation is a relatively trivial detail. We add an optional `morph_texture` to the `Mesh` struct. The `morph_texture` is built through a method that accepts an iterator over attribute buffers. The `MorphWeights` component, user-accessible, controls the blend of poses used by mesh instances (so that multiple copy of the same mesh may have different weights), all the weights are uploaded to a uniform buffer of 256 `f32`. We limit to 16 poses per mesh, and a total of 256 poses. More literature: * Old babylone.js implementation (vertex attribute-based): https://www.eternalcoding.com/dev-log-1-morph-targets/ * Babylone.js implementation (similar to ours): https://www.youtube.com/watch?v=LBPRmGgU0PE * GPU gems 3: https://developer.nvidia.com/gpugems/gpugems3/part-i-geometry/chapter-3-directx-10-blend-shapes-breaking-limits * Development discord thread https://discord.com/channels/691052431525675048/1083325980615114772 https://user-images.githubusercontent.com/26321040/231181046-3bca2ab2-d4d9-472e-8098-639f1871ce2e.mp4 https://github.com/bevyengine/bevy/assets/26321040/d2a0c544-0ef8-45cf-9f99-8c3792f5a258 ## Acknowledgements * Thanks to `storytold` for sponsoring the feature * Thanks to `superdump` and `james7132` for guidance and help figuring out stuff ## Future work - Handling of less and more attributes (eg: animated uv, animated arbitrary attributes) - Dynamic pose allocation (so that zero-weighted poses aren't uploaded to GPU for example, enables much more total poses) - Better animation API, see #8357 ---- ## Changelog - Add morph targets to bevy meshes - Support up to 64 poses per mesh of individually up to 116508 vertices, animation currently strictly limited to the position, normal and tangent attributes. - Load a morph target using `Mesh::set_morph_targets` - Add `VisitMorphTargets` and `VisitMorphAttributes` traits to `bevy_render`, this allows defining morph targets (a fairly complex and nested data structure) through iterators (ie: single copy instead of passing around buffers), see documentation of those traits for details - Add `MorphWeights` component exported by `bevy_render` - `MorphWeights` control mesh's morph target weights, blending between various poses defined as morph targets. - `MorphWeights` are directly inherited by direct children (single level of hierarchy) of an entity. This allows controlling several mesh primitives through a unique entity _as per GLTF spec_. - Add `MorphTargetNames` component, naming each indices of loaded morph targets. - Load morph targets weights and buffers in `bevy_gltf` - handle morph targets animations in `bevy_animation` (previously, it was a `warn!` log) - Add the `MorphStressTest.gltf` asset for morph targets testing, taken from the glTF samples repo, CC0. - Add morph target manipulation to `scene_viewer` - Separate the animation code in `scene_viewer` from the rest of the code, reducing `#[cfg(feature)]` noise - Add the `morph_targets.rs` example to show off how to manipulate morph targets, loading `MorpStressTest.gltf` ## Migration Guide - (very specialized, unlikely to be touched by 3rd parties) - `MeshPipeline` now has a single `mesh_layouts` field rather than separate `mesh_layout` and `skinned_mesh_layout` fields. You should handle all possible mesh bind group layouts in your implementation - You should also handle properly the new `MORPH_TARGETS` shader def and mesh pipeline key. A new function is exposed to make this easier: `setup_moprh_and_skinning_defs` - The `MeshBindGroup` is now `MeshBindGroups`, cached bind groups are now accessed through the `get` method. [1]: https://en.wikipedia.org/wiki/Morph_target_animation [2]: https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html#morph-targets --------- Co-authored-by: François <mockersf@gmail.com> Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2023-06-22 20:00:01 +00:00
ickshonpe	50c50cdcb6	UI Display and Visibility Example (#7629) ... # Objective An example demonstrating how Display and Visibility work in Bevy UI. fixes #5380 related #5368  ## Changelog * Added the example `flex_display.rs`.	2023-06-19 23:19:34 +00:00
mwbryant	8b5bf42c28	UI texture atlas support (#8822) ... # Objective This adds support for using texture atlas sprites in UI. From discussions today in the ui-dev discord it seems this is a much wanted feature. This was previously attempted in #5070 by @ManevilleF however that was blocked #5103. This work can be easily modified to support #5103 changes after that merges. ## Solution I created a new UI bundle that reuses the existing texture atlas infrastructure. I create a new atlas image component to prevent it from being drawn by the existing non-UI systems and to remove unused parameters. In extract I added new system to calculate the required values for the texture atlas image, this extracts into the same resource as the existing UI Image and Text components. This should have minimal performance impact because if texture atlas is not present then the exact same code path is followed. Also there should be no unintended behavior changes because without the new components the existing systems write the extract same resulting data. I also added an example showing the sprite working and a system to advance the animation on space bar presses. Naming is hard and I would accept any feedback on the bundle name! --- ## Changelog > Added TextureAtlasImageBundle --------- Co-authored-by: ickshonpe <david.curthoys@googlemail.com>	2023-06-19 21:52:02 +00:00
JMS55	af9c945f40	Screen Space Ambient Occlusion (SSAO) MVP (#7402) ...  # Objective - Add Screen space ambient occlusion (SSAO). SSAO approximates small-scale, local occlusion of _indirect_ diffuse light between objects. SSAO does not apply to direct lighting, such as point or directional lights. - This darkens creases, e.g. on staircases, and gives nice contact shadows where objects meet, giving entities a more "grounded" feel. - Closes https://github.com/bevyengine/bevy/issues/3632. ## Solution - Implement the GTAO algorithm. - https://www.activision.com/cdn/research/Practical_Real_Time_Strategies_for_Accurate_Indirect_Occlusion_NEW%20VERSION_COLOR.pdf - https://blog.selfshadow.com/publications/s2016-shading-course/activision/s2016_pbs_activision_occlusion.pdf - Source code heavily based on [Intel's XeGTAO](0d177ce06b/Source/Rendering/Shaders/XeGTAO.hlsli). - Add an SSAO bevy example. ## Algorithm Overview * Run a depth and normal prepass * Create downscaled mips of the depth texture (preprocess_depths pass) * GTAO pass - for each pixel, take several random samples from the depth+normal buffers, reconstruct world position, raytrace in screen space to estimate occlusion. Rather then doing completely random samples on a hemisphere, you choose random _slices_ of the hemisphere, and then can analytically compute the full occlusion of that slice. Also compute edges based on depth differences here. * Spatial denoise pass - bilateral blur, using edge detection to not blur over edges. This is the final SSAO result. * Main pass - if SSAO exists, sample the SSAO texture, and set occlusion to be the minimum of ssao/material occlusion. This then feeds into the rest of the PBR shader as normal. --- ## Future Improvements - Maybe remove the low quality preset for now (too noisy) - WebGPU fallback (see below) - Faster depth->world position (see reverted code) - Bent normals - Try interleaved gradient noise or spatiotemporal blue noise - Replace the spatial denoiser with a combined spatial+temporal denoiser - Render at half resolution and use a bilateral upsample - Better multibounce approximation (https://drive.google.com/file/d/1SyagcEVplIm2KkRD3WQYSO9O0Iyi1hfy/view) ## Far-Future Performance Improvements - F16 math (missing naga-wgsl support https://github.com/gfx-rs/naga/issues/1884) - Faster coordinate space conversion for normals - Faster depth mipchain creation (https://github.com/GPUOpen-Effects/FidelityFX-SPD) (wgpu/naga does not currently support subgroup ops) - Deinterleaved SSAO for better cache efficiency (https://developer.nvidia.com/sites/default/files/akamai/gameworks/samples/DeinterleavedTexturing.pdf) ## Other Interesting Papers - Visibility bitmask (https://link.springer.com/article/10.1007/s00371-022-02703-y, https://cdrinmatane.github.io/posts/cgspotlight-slides/) - Screen space diffuse lighting (https://github.com/Patapom/GodComplex/blob/master/Tests/TestHBIL/2018%20Mayaux%20-%20Horizon-Based%20Indirect%20Lighting%20(HBIL).pdf) ## Platform Support * SSAO currently does not work on DirectX12 due to issues with wgpu and naga: * https://github.com/gfx-rs/wgpu/pull/3798 * https://github.com/gfx-rs/naga/pull/2353 * SSAO currently does not work on WebGPU because r16float is not a valid storage texture format https://gpuweb.github.io/gpuweb/wgsl/#storage-texel-formats. We can fix this with a fallback to r32float. --- ## Changelog - Added ScreenSpaceAmbientOcclusionSettings, ScreenSpaceAmbientOcclusionQualityLevel, and ScreenSpaceAmbientOcclusionBundle --------- Co-authored-by: IceSentry <c.giguere42@gmail.com> Co-authored-by: IceSentry <IceSentry@users.noreply.github.com> Co-authored-by: Daniel Chia <danstryder@gmail.com> Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com> Co-authored-by: Robert Swain <robert.swain@gmail.com> Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com> Co-authored-by: Brandon Dyer <brandondyer64@gmail.com> Co-authored-by: Edgar Geier <geieredgar@gmail.com> Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com> Co-authored-by: Carter Anderson <mcanders1@gmail.com>	2023-06-18 21:05:55 +00:00
ickshonpe	f7aa83a247	Ui Node Borders (#7795) ... # Objective Implement borders for UI nodes. Relevant discussion: #7785 Related: #5924, #3991 <img width="283" alt="borders" src="https://user-images.githubusercontent.com/27962798/220968899-7661d5ec-6f5b-4b0f-af29-bf9af02259b5.PNG"> ## Solution Add an extraction function to draw the borders. --- Can only do one colour rectangular borders due to the limitations of the Bevy UI renderer. Maybe it can be combined with #3991 eventually to add curved border support. ## Changelog * Added a component `BorderColor`. * Added the `extract_uinode_borders` system to the UI Render App. * Added the UI example `borders` --------- Co-authored-by: Nico Burns <nico@nicoburns.com>	2023-06-14 22:43:38 +00:00
Alice Cecile	cbd4abf0fc	Rename apply_system_buffers to apply_deferred (#8726) ... # Objective - `apply_system_buffers` is an unhelpful name: it introduces a new internal-only concept - this is particularly rough for beginners as reasoning about how commands work is a critical stumbling block ## Solution - rename `apply_system_buffers` to the more descriptive `apply_deferred` - rename related fields, arguments and methods in the internals fo bevy_ecs for consistency - update the docs ## Changelog `apply_system_buffers` has been renamed to `apply_deferred`, to more clearly communicate its intent and relation to `Deferred` system parameters like `Commands`. ## Migration Guide - `apply_system_buffers` has been renamed to `apply_deferred` - the `apply_system_buffers` method on the `System` trait has been renamed to `apply_deferred` - the `is_apply_system_buffers` function has been replaced by `is_apply_deferred` - `Executor::set_apply_final_buffers` is now `Executor::set_apply_final_deferred` - `Schedule::apply_system_buffers` is now `Schedule::apply_deferred` --------- Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>	2023-06-02 14:04:13 +00:00
François	25f013ba1b	audio and browsers section for wasm examples (#8625) ... # Objective - Help users better understand audio issues in wasm ## Solution - Describe some of the known issues, and some of the workarounds	2023-05-17 23:54:35 +00:00
François	71842c5ac9	Webgpu support (#8336) ... # Objective - Support WebGPU - alternative to #5027 that doesn't need any async / await - fixes #8315 - Surprise fix #7318 ## Solution ### For async renderer initialisation - Update the plugin lifecycle: - app builds the plugin - calls `plugin.build` - registers the plugin - app starts the event loop - event loop waits for `ready` of all registered plugins in the same order - returns `true` by default - then call all `finish` then all `cleanup` in the same order as registered - then execute the schedule In the case of the renderer, to avoid anything async: - building the renderer plugin creates a detached task that will send back the initialised renderer through a mutex in a resource - `ready` will wait for the renderer to be present in the resource - `finish` will take that renderer and place it in the expected resources by other plugins - other plugins (that expect the renderer to be available) `finish` are called and they are able to set up their pipelines - `cleanup` is called, only custom one is still for pipeline rendering ### For WebGPU support - update the `build-wasm-example` script to support passing `--api webgpu` that will build the example with WebGPU support - feature for webgl2 was always enabled when building for wasm. it's now in the default feature list and enabled on all platforms, so check for this feature must also check that the target_arch is `wasm32` --- ## Migration Guide - `Plugin::setup` has been renamed `Plugin::cleanup` - `Plugin::finish` has been added, and plugins adding pipelines should do it in this function instead of `Plugin::build` ```rust // Before impl Plugin for MyPlugin { fn build(&self, app: &mut App) { app.insert_resource::<MyResource> .add_systems(Update, my_system); let render_app = match app.get_sub_app_mut(RenderApp) { Ok(render_app) => render_app, Err(_) => return, }; render_app .init_resource::<RenderResourceNeedingDevice>() .init_resource::<OtherRenderResource>(); } } // After impl Plugin for MyPlugin { fn build(&self, app: &mut App) { app.insert_resource::<MyResource> .add_systems(Update, my_system); let render_app = match app.get_sub_app_mut(RenderApp) { Ok(render_app) => render_app, Err(_) => return, }; render_app .init_resource::<OtherRenderResource>(); } fn finish(&self, app: &mut App) { let render_app = match app.get_sub_app_mut(RenderApp) { Ok(render_app) => render_app, Err(_) => return, }; render_app .init_resource::<RenderResourceNeedingDevice>(); } } ```	2023-05-04 22:07:57 +00:00
Johan Klokkhammer Helsing	a1e442cd2a	Add gamepad rumble support to bevy_input (#8398) ... # Objective Provide the ability to trigger controller rumbling (force-feedback) with a cross-platform API. ## Solution This adds the `GamepadRumbleRequest` event to `bevy_input` and adds a system in `bevy_gilrs` to read them and rumble controllers accordingly. It's a relatively primitive API with a `duration` in seconds and `GamepadRumbleIntensity` with values for the weak and strong gamepad motors. It's is an almost 1-to-1 mapping to platform APIs. Some platforms refer to these motors as left and right, and low frequency and high frequency, but by convention, they're usually the same. I used #3868 as a starting point, updated to main, removed the low-level gilrs effect API, and moved the requests to `bevy_input` and exposed the strong and weak intensities. I intend this to hopefully be a non-controversial cross-platform starting point we can build upon to eventually support more fine-grained control (closer to the gilrs effect API) --- ## Changelog ### Added - Gamepads can now be rumbled by sending the `GamepadRumbleRequest` event. --------- Co-authored-by: Nicola Papale <nico@nicopap.ch> Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com> Co-authored-by: Bruce Reif (Buswolley) <bruce.reif@dynata.com>	2023-04-24 15:28:53 +00:00
ickshonpe	f3360938eb	Size Constraints Example (#7956) ... # Objective Add a simple example demonstrating how to use size constraints. Related to #7946 # Solution <img width="827" alt="Capture" src="https://user-images.githubusercontent.com/27962798/223741566-4b8eca99-c450-42b5-a40e-a414858c8310.PNG"> # Changelog * Added the example `size_constraints`	2023-04-24 14:28:00 +00:00
ickshonpe	bb37ae4ab3	UI text wrapping and LineBreakOn example (#7761) ... # Objective An example demonstrating more text layout options, text wrapping and `LineBreakOn`. <img width="961" alt="text_wrap" src="https://user-images.githubusercontent.com/27962798/220125391-48163d28-51d9-4df5-b34a-f95ca3661b7d.PNG"> Won't look exactly like this on main because of the remaining bugs in text. --------- Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>	2023-04-24 14:22:31 +00:00