# Objective
- Since https://github.com/bevyengine/bevy/pull/11366, feature `glsl` of
`naga_oil` is not enabled by default
- It is needed for example `shader_material_glsl`
```
thread 'Compute Task Pool (0)' panicked at crates\bevy_render\src\render_resource\shader.rs:238:35:
GLSL is not supported in this configuration; use the feature `shader_format_glsl`
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Encountered a panic in system `bevy_render::render_resource::pipeline_cache::PipelineCache::process_pipeline_queue_system`!
thread 'main' panicked at crates\bevy_render\src\pipelined_rendering.rs:145:45:
called `Result::unwrap()` on an `Err` value: RecvError
```
## Solution
- Add feature `shader_format_glsl` as a required feature for example
`shader_material_glsl`
# Objective
Currently, the `Ellipse` primitive is represented by a `half_width` and
`half_height`. To improve consistency (similarly to #11434), it might
make more sense to use a `Vec2` `half_size` instead.
Alternatively, to make the elliptical nature clearer, the properties
could also be called `radius_x` and `radius_y`.
Secondly, `Ellipse::new` currently takes a *full* width and height
instead of two radii. I would expect it to take the half-width and
half-height because ellipses and circles are almost always defined using
radii. I wouldn't expect `Circle::new` to take a diameter (if we had
that method).
## Solution
Change `Ellipse` to store a `half_size` and `new` to take the half-width
and half-height.
I also added a `from_size` method similar to `Rectangle::from_size`, and
added the `semi_minor` and `semi_major` helpers to get the
semi-minor/major radius.
# Objective
The `Rectangle` and `Cuboid` primitives currently use different
representations:
```rust
pub struct Rectangle {
/// The half width of the rectangle
pub half_width: f32,
/// The half height of the rectangle
pub half_height: f32,
}
pub struct Cuboid {
/// Half of the width, height and depth of the cuboid
pub half_extents: Vec3,
}
```
The property names and helpers are also inconsistent. `Cuboid` has
`half_extents`, but it also has a method called `from_size`. Most
existing code also uses "size" instead of "extents".
## Solution
Represent both `Rectangle` and `Cuboid` with `half_size` properties.
# Objective
Implements #9216
## Solution
- Replace `DiagnosticId` by `DiagnosticPath`. It's pre-hashed using
`const-fnv1a-hash` crate, so it's possible to create path in const
contexts.
---
## Changelog
- Replaced `DiagnosticId` by `DiagnosticPath`
- Set default history length to 120 measurements (2 seconds on 60 fps).
I've noticed hardcoded constant 20 everywhere and decided to change it
to `DEFAULT_MAX_HISTORY_LENGTH` , which is set to new diagnostics by
default. To override it, use `with_max_history_length`.
## Migration Guide
```diff
- const UNIQUE_DIAG_ID: DiagnosticId = DiagnosticId::from_u128(42);
+ const UNIQUE_DIAG_PATH: DiagnosticPath = DiagnosticPath::const_new("foo/bar");
- Diagnostic::new(UNIQUE_DIAG_ID, "example", 10)
+ Diagnostic::new(UNIQUE_DIAG_PATH).with_max_history_length(10)
- diagnostics.add_measurement(UNIQUE_DIAG_ID, || 42);
+ diagnostics.add_measurement(&UNIQUE_DIAG_ID, || 42);
```
# Objective
- since #9685 ,bevy introduce automatic batching of draw commands,
- `batch_and_prepare_render_phase` take the responsibility for batching
`phaseItem`,
- `GetBatchData` trait is used for indentify each phaseitem how to
batch. it defines a associated type `Data `used for Query to fetch data
from world.
- however,the impl of `GetBatchData ` in bevy always set ` type
Data=Entity` then we acually get following code
`let entity:Entity =query.get(item.entity())` that cause unnecessary
overhead .
## Solution
- remove associated type `Data ` and `Filter` from `GetBatchData `,
- change the type of the `query_item ` parameter in get_batch_data from`
Self::Data` to `Entity`.
- `batch_and_prepare_render_phase ` no longer takes a query using
`F::Data, F::Filter`
- `get_batch_data `now returns `Option<(Self::BufferData,
Option<Self::CompareData>)>`
---
## Performance
based in main merged with #11290
Window 11 ,Intel 13400kf, NV 4070Ti
frame time from 3.34ms to 3 ms, ~ 10%
`batch_and_prepare_render_phase` from 800us ~ 400 us
## Migration Guide
trait `GetBatchData` no longer hold associated type `Data `and `Filter`
`get_batch_data` `query_item `type from `Self::Data` to `Entity` and
return `Option<(Self::BufferData, Option<Self::CompareData>)>`
`batch_and_prepare_render_phase` should not have a query
# Objective
- `actions/upload-pages-artifact` and `actions/deploy-pages` are
outdated.
- Alternative to #11253 and #11252.
## Solution
- Bump the version of both actions.
---
There appear to be no user-facing changes. They just both need to be
updated together. (The `actions: read` permission was a bug that was
fixed later.)
# Objective
Adjust bevy internals to utilize `Option<Res<State<S>>>` instead of
`Res<State<S>>`, to allow for adding/removing states at runtime and
avoid unexpected panics.
As requested here:
https://github.com/bevyengine/bevy/pull/10088#issuecomment-1869185413
---
## Changelog
- Changed the use of `world.resource`/`world.resource_mut` to
`world.get_resource`/`world.get_resource_mut` in the
`run_enter_schedule` and `apply_state_transition` systems and handled
the `None` option.
- `in_state` now returns a ` FnMut(Option<Res<State<S>>>) -> bool +
Clone`, returning `false` if the resource doesn't exist.
- `state_exists_and_equals` was marked as deprecated, and now just runs
and returns `in_state`, since their bevhaviour is now identical
- `state_changed` now takes an `Option<Res<State<S>>>` and returns
`false` if it does not exist.
I would like to remove `state_exists_and_equals` fully, but wanted to
ensure that is acceptable before doing so.
---------
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
- `FromType<T>` for `ReflectComponent` and `ReflectBundle` currently
require `T: FromWorld` for two reasons:
- they include a `from_world` method;
- they create dummy `T`s using `FromWorld` and then `apply` a `&dyn
Reflect` to it to simulate `FromReflect`.
- However `FromWorld`/`Default` may be difficult/weird/impractical to
implement, while `FromReflect` is easier and also more natural for the
job.
- See also
https://discord.com/channels/691052431525675048/1146022009554337792
## Solution
- Split `from_world` from `ReflectComponent` and `ReflectBundle` into
its own `ReflectFromWorld` struct.
- Replace the requirement on `FromWorld` in `ReflectComponent` and
`ReflectBundle` with `FromReflect`
---
## Changelog
- `ReflectComponent` and `ReflectBundle` no longer offer a `from_world`
method.
- `ReflectComponent` and `ReflectBundle`'s `FromType<T>` implementation
no longer requires `T: FromWorld`, but now requires `FromReflect`.
- `ReflectComponent::insert`, `ReflectComponent::apply_or_insert` and
`ReflectComponent::copy` now take an extra `&TypeRegistry` parameter.
- There is now a new `ReflectFromWorld` struct.
## Migration Guide
- Existing uses of `ReflectComponent::from_world` and
`ReflectBundle::from_world` will have to be changed to
`ReflectFromWorld::from_world`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` will need to
also implement/derive `FromReflect`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` may now want
to also add `FromWorld` to the list of reflected traits in case their
`FromReflect` implementation may fail.
- Users of `ReflectComponent` will now need to pass a `&TypeRegistry` to
its `insert`, `apply_or_insert` and `copy` methods.
This pull request re-submits #10057, which was backed out for breaking
macOS, iOS, and Android. I've tested this version on macOS and Android
and on the iOS simulator.
# Objective
This pull request implements *reflection probes*, which generalize
environment maps to allow for multiple environment maps in the same
scene, each of which has an axis-aligned bounding box. This is a
standard feature of physically-based renderers and was inspired by [the
corresponding feature in Blender's Eevee renderer].
## Solution
This is a minimal implementation of reflection probes that allows
artists to define cuboid bounding regions associated with environment
maps. For every view, on every frame, a system builds up a list of the
nearest 4 reflection probes that are within the view's frustum and
supplies that list to the shader. The PBR fragment shader searches
through the list, finds the first containing reflection probe, and uses
it for indirect lighting, falling back to the view's environment map if
none is found. Both forward and deferred renderers are fully supported.
A reflection probe is an entity with a pair of components, *LightProbe*
and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to
position it in the world). The *LightProbe* component (along with the
*Transform*) defines the bounding region, while the
*EnvironmentMapLight* component specifies the associated diffuse and
specular cubemaps.
A frequent question is "why two components instead of just one?" The
advantages of this setup are:
1. It's readily extensible to other types of light probes, in particular
*irradiance volumes* (also known as ambient cubes or voxel global
illumination), which use the same approach of bounding cuboids. With a
single component that applies to both reflection probes and irradiance
volumes, we can share the logic that implements falloff and blending
between multiple light probes between both of those features.
2. It reduces duplication between the existing *EnvironmentMapLight* and
these new reflection probes. Systems can treat environment maps attached
to cameras the same way they treat environment maps applied to
reflection probes if they wish.
Internally, we gather up all environment maps in the scene and place
them in a cubemap array. At present, this means that all environment
maps must have the same size, mipmap count, and texture format. A
warning is emitted if this restriction is violated. We could potentially
relax this in the future as part of the automatic mipmap generation
work, which could easily do texture format conversion as part of its
preprocessing.
An easy way to generate reflection probe cubemaps is to bake them in
Blender and use the `export-blender-gi` tool that's part of the
[`bevy-baked-gi`] project. This tool takes a `.blend` file containing
baked cubemaps as input and exports cubemap images, pre-filtered with an
embedded fork of the [glTF IBL Sampler], alongside a corresponding
`.scn.ron` file that the scene spawner can use to recreate the
reflection probes.
Note that this is intentionally a minimal implementation, to aid
reviewability. Known issues are:
* Reflection probes are basically unsupported on WebGL 2, because WebGL
2 has no cubemap arrays. (Strictly speaking, you can have precisely one
reflection probe in the scene if you have no other cubemaps anywhere,
but this isn't very useful.)
* Reflection probes have no falloff, so reflections will abruptly change
when objects move from one bounding region to another.
* As mentioned before, all cubemaps in the world of a given type
(diffuse or specular) must have the same size, format, and mipmap count.
Future work includes:
* Blending between multiple reflection probes.
* A falloff/fade-out region so that reflected objects disappear
gradually instead of vanishing all at once.
* Irradiance volumes for voxel-based global illumination. This should
reuse much of the reflection probe logic, as they're both GI techniques
based on cuboid bounding regions.
* Support for WebGL 2, by breaking batches when reflection probes are
used.
These issues notwithstanding, I think it's best to land this with
roughly the current set of functionality, because this patch is useful
as is and adding everything above would make the pull request
significantly larger and harder to review.
---
## Changelog
### Added
* A new *LightProbe* component is available that specifies a bounding
region that an *EnvironmentMapLight* applies to. The combination of a
*LightProbe* and an *EnvironmentMapLight* offers *reflection probe*
functionality similar to that available in other engines.
[the corresponding feature in Blender's Eevee renderer]:
https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
[glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler
# Objective
- Example `deterministic` crashes on CI on Windows because it uses too
much memory
## Solution
- Reduce the number of planes displayed while still having the issue
- While there, add a small margin to the text so that it's prettier
# Objective
When working within `bevy_ecs`, we can't use the `log_once` macros due
to their placement in `bevy_log` - which depends on `bevy_ecs`. All this
create does is migrate those macros to the `bevy_utils` crate, while
still re-exporting them in `bevy_log`.
created to resolve this:
https://github.com/bevyengine/bevy/pull/11417#discussion_r1458100211
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
After the Gizmos changes, `App::init_gizmos_group` turned into a
important function that for sure mustn't panic. The problem is: the
actual implementation causes a panic if somehow the code is runned
before `GizmoPlugin` was added to the App
- The error occurs here for example:
```rust
fn main() {
App::new()
.init_gizmo_group::<MyGizmoConfig>()
.add_plugins(DefaultPlugins)
.run();
}
#[derive(Default, Reflect, GizmoConfigGroup)]
struct MyGizmoConfig;
```
## Solution
- Instead of panicking when getting `GizmoConfigStore`, insert the store
in `App::init_gizmos_group` if needed
---
## Changelog
### Changed
- Changed App::init_gizmos_group to insert the resource if it don't
exist
### Removed
- Removed explicit init of `GizmoConfigStore`
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Some users want to change the default texture usage of the main camera
but they are currently hardcoded
## Solution
- Add a component that is used to configure the main texture usage field
---
## Changelog
Added `CameraMainTextureUsage`
Added `CameraMainTextureUsage` to `Camera3dBundle` and `Camera2dBundle`
## Migration Guide
Add `main_texture_usages: Default::default()` to your camera bundle.
# Notes
Inspired by: #6815
# Objective
- Tests are manually checking whether derived types implement certain
traits. (Specifically in `bevy_reflect.)
- #11182 introduces
[`static_assertions`](https://docs.rs/static_assertions/) to
automatically check this.
- Simplifies `Reflect` test in #11195.
- Closes#11196.
## Solution
- Add `static_assertions` and replace current tests.
---
I wasn't sure whether to remove the existing test or not. What do you
think?
# Objective
- Add methods to get Change Ticks for a given resource by type or
ComponentId
- Fixes#11390
The `is_resource_id_changed` requested in the Issue already exists, this
adds their request for `get_resource_change_ticks`
## Solution
- Added two methods to get change ticks by Type or ComponentId
# Objective
Closes#10570.
#10946 added bounding volume types and traits, but didn't use them for
anything yet. This PR implements `Bounded2d` and `Bounded3d` for Bevy's
primitive shapes.
## Solution
Implement `Bounded2d` and `Bounded3d` for primitive shapes. This allows
computing AABBs and bounding circles/spheres for them.
For most shapes, there are several ways of implementing bounding
volumes. I took inspiration from [Parry's bounding
volumes](https://github.com/dimforge/parry/tree/master/src/bounding_volume),
[Inigo Quilez](http://iquilezles.org/articles/diskbbox/), and figured
out the rest myself using geometry. I tried to comment all slightly
non-trivial or unclear math to make it understandable.
Parry uses support mapping (finding the farthest point in some direction
for convex shapes) for some AABBs like cones, cylinders, and line
segments. This involves several quat operations and normalizations, so I
opted for the simpler and more efficient geometric approaches shown in
[Quilez's article](http://iquilezles.org/articles/diskbbox/).
Below you can see some of the bounding volumes working in 2D and 3D.
Note that I can't conveniently add these examples yet because they use
primitive shape meshing, which is still WIP.
https://github.com/bevyengine/bevy/assets/57632562/4465cbc6-285b-4c71-b62d-a2b3ee16f8b4https://github.com/bevyengine/bevy/assets/57632562/94b4ac84-a092-46d7-b438-ce2e971496a4
---
## Changelog
- Implemented `Bounded2d`/`Bounded3d` for primitive shapes
- Added `from_point_cloud` method for bounding volumes (used by many
bounding implementations)
- Added `point_cloud_2d/3d_center` and `rotate_vec2` utility functions
- Added `RegularPolygon::vertices` method (used in regular polygon AABB
construction)
- Added `Triangle::circumcenter` method (used in triangle bounding
circle construction)
- Added bounding circle/sphere creation from AABBs and vice versa
## Extra
Do we want to implement `Bounded2d` for some "3D-ish" shapes too? For
example, capsules are sort of dimension-agnostic and useful for 2D, so I
think that would be good to implement. But a cylinder in 2D is just a
rectangle, and a cone is a triangle, so they wouldn't make as much sense
to me. A conical frustum would be an isosceles trapezoid, which could be
useful, but I'm not sure if computing the 2D AABB of a 3D frustum makes
semantic sense.
# Objective
This PR aims to implement multiple configs for gizmos as discussed in
#9187.
## Solution
Configs for the new `GizmoConfigGroup`s are stored in a
`GizmoConfigStore` resource and can be accesses using a type based key
or iterated over. This type based key doubles as a standardized location
where plugin authors can put their own configuration not covered by the
standard `GizmoConfig` struct. For example the `AabbGizmoGroup` has a
default color and toggle to show all AABBs. New configs can be
registered using `app.init_gizmo_group::<T>()` during startup.
When requesting the `Gizmos<T>` system parameter the generic type
determines which config is used. The config structs are available
through the `Gizmos` system parameter allowing for easy access while
drawing your gizmos.
Internally, resources and systems used for rendering (up to an including
the extract system) are generic over the type based key and inserted on
registering a new config.
## Alternatives
The configs could be stored as components on entities with markers which
would make better use of the ECS. I also implemented this approach
([here](https://github.com/jeliag/bevy/tree/gizmo-multiconf-comp)) and
believe that the ergonomic benefits of a central config store outweigh
the decreased use of the ECS.
## Unsafe Code
Implementing system parameter by hand is unsafe but seems to be required
to access the config store once and not on every gizmo draw function
call. This is critical for performance. ~Is there a better way to do
this?~
## Future Work
New gizmos (such as #10038, and ideas from #9400) will require custom
configuration structs. Should there be a new custom config for every
gizmo type, or should we group them together in a common configuration?
(for example `EditorGizmoConfig`, or something more fine-grained)
## Changelog
- Added `GizmoConfigStore` resource and `GizmoConfigGroup` trait
- Added `init_gizmo_group` to `App`
- Added early returns to gizmo drawing increasing performance when
gizmos are disabled
- Changed `GizmoConfig` and aabb gizmos to use new `GizmoConfigStore`
- Changed `Gizmos` system parameter to use type based key to retrieve
config
- Changed resources and systems used for gizmo rendering to be generic
over type based key
- Changed examples (3d_gizmos, 2d_gizmos) to showcase new API
## Migration Guide
- `GizmoConfig` is no longer a resource and has to be accessed through
`GizmoConfigStore` resource. The default config group is
`DefaultGizmoGroup`, but consider using your own custom config group if
applicable.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
This adds events for assets that fail to load along with minor utility
methods to make them useful. This paves the way for users writing their
own error handling and retry systems, plus Bevy including robust retry
handling: #11349.
* Addresses #11288
* Needed for #11349
# Solution
```rust
/// An event emitted when a specific [`Asset`] fails to load.
#[derive(Event, Clone, Debug)]
pub struct AssetLoadFailedEvent<A: Asset> {
pub id: AssetId<A>,
/// The original handle returned when the asset load was requested.
pub handle: Option<Handle<A>>,
/// The asset path that was attempted.
pub path: AssetPath<'static>,
/// Why the asset failed to load.
pub error: AssetLoadError,
}
```
I started implementing `AssetEvent::Failed` like suggested in #11288,
but decided it was better as its own type because:
* I think it makes sense for `AssetEvent` to only refer to assets that
actually exist.
* In order to return `AssetLoadError` in the event (which is useful
information for error handlers that might attempt a retry) we would have
to remove `Copy` from `AssetEvent`.
* There are numerous places in the render app that match against
`AssetEvent`, and I don't think it's worth introducing extra noise about
assets that don't exist.
I also introduced `UntypedAssetLoadErrorEvent`, which is very useful in
places that need to support type flexibility, like an Asset-agnostic
retry plugin.
# Changelog
* **Added:** `AssetLoadFailedEvent<A>`
* **Added**: `UntypedAssetLoadFailedEvent`
* **Added:** `AssetReaderError::Http` for status code information on
HTTP errors. Before this, status codes were only available by parsing
the error message of generic `Io` errors.
* **Added:** `asset_server.get_path_id(path)`. This method simply gets
the asset id for the path. Without this, one was left using
`get_path_handle(path)`, which has the overhead of returning a strong
handle.
* **Fixed**: Made `AssetServer` loads return the same handle for assets
that already exist in a failed state. Now, when you attempt a `load`
that's in a `LoadState::Failed` state, it'll re-use the original asset
id. The advantage of this is that any dependent assets created using the
original handle will "unbreak" if a retry succeeds.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#11376
During the development of the exposure settings PR (#11347) all examples
with lighting had to be adjusted, but three were missed or simply didn't
exist yet at the time. This PR restores the brightness in those examples
again:
render_ui_to_texture
asset_loading
hot_asset_reloading
All of them are a bit brighter now compared to before the exposure PR,
but it looks better IMO.
# Objective
Issue: There is a typo in `CONTRIBUTING.md` ("then" used in place of
"them"). There is also an inconsistency of usage of periods at ends of
items in lists, and one section is written with non-breaking spaces
without good reason.
## Solution
Fix the aforementioned typo and consistency issues.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
fix an occasional crash when moving ui root nodes between cameras.
occasionally, updating the TargetCamera of a ui element and then
removing the element causes a crash.
i believe that is because when we assign a child in taffy, the old
parent doesn't remove that child from it's children, so we have:
```
user: create root node N1, camera A
-> layout::set_camera_children(A) :
- create implicit node A1
- assign 1 as child -> taffy.children[A1] = [N1], taffy.parents[1] = A1
user: move root node N1 to camera B
-> layout::set_camera_children(B) :
- create implicit node B1
- assign 1 as child -> taffy.children[A1] = [N1], taffy.children[B1] = [N1], taffy.parents[1] = B1
-> layout::set_camera_children(A) :
- remove implicit node A1 (which still has N1 as a child) ->
-> taffy sets parent[N1] = None ***
-> taffy.children[B1] = [N1], taffy.parents[1] = None
user: remove N1
-> layout::remove_entities(N1)
- since parent[N1] is None, it's not removed from B1 -> taffy.children[B1] = [N1], taffy.parents[1] is removed
-> layout::set_camera_children(B)
- remove implicit node B1
- taffy crash accessing taffy.parents[N1]
```
## Solution
we can work around this by making sure to remove the child from the old
parent if one exists (this pr).
i think a better fix may be for taffy to check in `Taffy::remove` and
only set the child's parent to None if it is currently equal to the node
being removed but i'm not sure if there's an explicit assumption we're
violating here (@nicoburns).
# Objective
- `DynamicUniformBuffer::push` takes an owned `T` but only uses a shared
reference to it
- This in turn requires users of `DynamicUniformBuffer::push` to
potentially unecessarily clone data
## Solution
- Have `DynamicUniformBuffer::push` take a shared reference to `T`
---
## Changelog
- `DynamicUniformBuffer::push` now takes a `&T` instead of `T`
## Migration Guide
- Users of `DynamicUniformBuffer::push` now need to pass references to
`DynamicUniformBuffer::push` (e.g. existing `uniforms.push(value)` will
now become `uniforms.push(&value)`)
# Objective
Expand the existing `Query` API to support more dynamic use cases i.e.
scripting.
## Prior Art
- #6390
- #8308
- #10037
## Solution
- Create a `QueryBuilder` with runtime methods to define the set of
component accesses for a built query.
- Create new `WorldQueryData` implementations `FilteredEntityMut` and
`FilteredEntityRef` as variants of `EntityMut` and `EntityRef` that
provide run time checked access to the components included in a given
query.
- Add new methods to `Query` to create "query lens" with a subset of the
access of the initial query.
### Query Builder
The `QueryBuilder` API allows you to define a query at runtime. At it's
most basic use it will simply create a query with the corresponding type
signature:
```rust
let query = QueryBuilder::<Entity, With<A>>::new(&mut world).build();
// is equivalent to
let query = QueryState::<Entity, With<A>>::new(&mut world);
```
Before calling `.build()` you also have the opportunity to add
additional accesses and filters. Here is a simple example where we add
additional filter terms:
```rust
let entity_a = world.spawn((A(0), B(0))).id();
let entity_b = world.spawn((A(0), C(0))).id();
let mut query_a = QueryBuilder::<Entity>::new(&mut world)
.with::<A>()
.without::<C>()
.build();
assert_eq!(entity_a, query_a.single(&world));
```
This alone is useful in that allows you to decide which archetypes your
query will match at runtime. However it is also very limited, consider a
case like the following:
```rust
let query_a = QueryBuilder::<&A>::new(&mut world)
// Add an additional access
.data::<&B>()
.build();
```
This will grant the query an additional read access to component B
however we have no way of accessing the data while iterating as the type
signature still only includes &A. For an even more concrete example of
this consider dynamic components:
```rust
let query_a = QueryBuilder::<Entity>::new(&mut world)
// Adding a filter is easy since it doesn't need be read later
.with_id(component_id_a)
// How do I access the data of this component?
.ref_id(component_id_b)
.build();
```
With this in mind the `QueryBuilder` API seems somewhat incomplete by
itself, we need some way method of accessing the components dynamically.
So here's one:
### Query Transmutation
If the problem is not having the component in the type signature why not
just add it? This PR also adds transmute methods to `QueryBuilder` and
`QueryState`. Here's a simple example:
```rust
world.spawn(A(0));
world.spawn((A(1), B(0)));
let mut query = QueryBuilder::<()>::new(&mut world)
.with::<B>()
.transmute::<&A>()
.build();
query.iter(&world).for_each(|a| assert_eq!(a.0, 1));
```
The `QueryState` and `QueryBuilder` transmute methods look quite similar
but are different in one respect. Transmuting a builder will always
succeed as it will just add the additional accesses needed for the new
terms if they weren't already included. Transmuting a `QueryState` will
panic in the case that the new type signature would give it access it
didn't already have, for example:
```rust
let query = QueryState::<&A, Option<&B>>::new(&mut world);
/// This is fine, the access for Option<&A> is less restrictive than &A
query.transmute::<Option<&A>>(&world);
/// Oh no, this would allow access to &B on entities that might not have it, so it panics
query.transmute::<&B>(&world);
/// This is right out
query.transmute::<&C>(&world);
```
This is quite an appealing API to also have available on `Query` however
it does pose one additional wrinkle: In order to to change the iterator
we need to create a new `QueryState` to back it. `Query` doesn't own
it's own state though, it just borrows it, so we need a place to borrow
it from. This is why `QueryLens` exists, it is a place to store the new
state so it can be borrowed when you call `.query()` leaving you with an
API like this:
```rust
fn function_that_takes_a_query(query: &Query<&A>) {
// ...
}
fn system(query: Query<(&A, &B)>) {
let lens = query.transmute_lens::<&A>();
let q = lens.query();
function_that_takes_a_query(&q);
}
```
Now you may be thinking: Hey, wait a second, you introduced the problem
with dynamic components and then described a solution that only works
for static components! Ok, you got me, I guess we need a bit more:
### Filtered Entity References
Currently the only way you can access dynamic components on entities
through a query is with either `EntityMut` or `EntityRef`, however these
can access all components and so conflict with all other accesses. This
PR introduces `FilteredEntityMut` and `FilteredEntityRef` as
alternatives that have additional runtime checking to prevent accessing
components that you shouldn't. This way you can build a query with a
`QueryBuilder` and actually access the components you asked for:
```rust
let mut query = QueryBuilder::<FilteredEntityRef>::new(&mut world)
.ref_id(component_id_a)
.with(component_id_b)
.build();
let entity_ref = query.single(&world);
// Returns Some(Ptr) as we have that component and are allowed to read it
let a = entity_ref.get_by_id(component_id_a);
// Will return None even though the entity does have the component, as we are not allowed to read it
let b = entity_ref.get_by_id(component_id_b);
```
For the most part these new structs have the exact same methods as their
non-filtered equivalents.
Putting all of this together we can do some truly dynamic ECS queries,
check out the `dynamic` example to see it in action:
```
Commands:
comp, c Create new components
spawn, s Spawn entities
query, q Query for entities
Enter a command with no parameters for usage.
> c A, B, C, Data 4
Component A created with id: 0
Component B created with id: 1
Component C created with id: 2
Component Data created with id: 3
> s A, B, Data 1
Entity spawned with id: 0v0
> s A, C, Data 0
Entity spawned with id: 1v0
> q &Data
0v0: Data: [1, 0, 0, 0]
1v0: Data: [0, 0, 0, 0]
> q B, &mut Data
0v0: Data: [2, 1, 1, 1]
> q B || C, &Data
0v0: Data: [2, 1, 1, 1]
1v0: Data: [0, 0, 0, 0]
```
## Changelog
- Add new `transmute_lens` methods to `Query`.
- Add new types `QueryBuilder`, `FilteredEntityMut`, `FilteredEntityRef`
and `QueryLens`
- `update_archetype_component_access` has been removed, archetype
component accesses are now determined by the accesses set in
`update_component_access`
- Added method `set_access` to `WorldQuery`, this is called before
`update_component_access` for queries that have a restricted set of
accesses, such as those built by `QueryBuilder` or `QueryLens`. This is
primarily used by the `FilteredEntity*` variants and has an empty trait
implementation.
- Added method `get_state` to `WorldQuery` as a fallible version of
`init_state` when you don't have `&mut World` access.
## Future Work
Improve performance of `FilteredEntityMut` and `FilteredEntityRef`,
currently they have to determine the accesses a query has in a given
archetype during iteration which is far from ideal, especially since we
already did the work when matching the archetype in the first place. To
avoid making more internal API changes I have left it out of this PR.
---------
Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
# Objective
Tried using "embedded_watcher" feature and `embedded_asset!()` from
another crate. The assets embedded fine but were not "watched." The
problem appears to be that checking for the feature was done inside the
macro, so rather than checking if "embedded_watcher" was enabled for
bevy, it would check if it was enabled for the current crate.
## Solution
I extracted the checks for the "embedded_watcher" feature into its own
function called `watched_path()`. No external changes.
### Alternative Solution
An alternative fix would be to not do any feature checking in
`embedded_asset!()` or an extracted function and always send the
full_path to `insert_asset()` where it's promptly dropped when the
feature isn't turned on. That would be simpler.
```
($app: ident, $source_path: expr, $path: expr) => {{
let mut embedded = $app
.world
.resource_mut::<$crate::io::embedded::EmbeddedAssetRegistry>();
let path = $crate::embedded_path!($source_path, $path);
//#[cfg(feature = "embedded_watcher")]
let full_path = std::path::Path::new(file!()).parent().unwrap().join($path);
//#[cfg(not(feature = "embedded_watcher"))]
//let full_path = std::path::PathBuf::new();
embedded.insert_asset(full_path, &path, include_bytes!($path));
}};
```
## Changelog
> Fix embedded_watcher feature to work with external crates
Rebased and finished version of
https://github.com/bevyengine/bevy/pull/8407. Huge thanks to @GitGhillie
for adjusting all the examples, and the many other people who helped
write this PR (@superdump , @coreh , among others) :)
Fixes https://github.com/bevyengine/bevy/issues/8369
---
## Changelog
- Added a `brightness` control to `Skybox`.
- Added an `intensity` control to `EnvironmentMapLight`.
- Added `ExposureSettings` and `PhysicalCameraParameters` for
controlling exposure of 3D cameras.
- Removed the baked-in `DirectionalLight` exposure Bevy previously
hardcoded internally.
## Migration Guide
- If using a `Skybox` or `EnvironmentMapLight`, use the new `brightness`
and `intensity` controls to adjust their strength.
- All 3D scene will now have different apparent brightnesses due to Bevy
implementing proper exposure controls. You will have to adjust the
intensity of your lights and/or your camera exposure via the new
`ExposureSettings` component to compensate.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: GitGhillie <jillisnoordhoek@gmail.com>
Co-authored-by: Marco Buono <thecoreh@gmail.com>
Co-authored-by: vero <email@atlasdostal.com>
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
gltf-rs does its own computations when accessing `transform.matrix()`
which does not use glam types, rendering #11238 useless if people were
to load gltf models and expecting the results to be deterministic across
platforms.
## Solution
Move the computation to bevy side which uses glam types, it was already
used in one place, so I created one common function to handle the two
cases.
The added benefit this has, is that some gltf files can have
translation, rotation and scale directly instead of matrix which skips
the transform computation completely, win-win.
# Objective
> Old MR: #5072
> ~~Associated UI MR: #5070~~
> Adresses #1618
Unify sprite management
## Solution
- Remove the `Handle<Image>` field in `TextureAtlas` which is the main
cause for all the boilerplate
- Remove the redundant `TextureAtlasSprite` component
- Renamed `TextureAtlas` asset to `TextureAtlasLayout`
([suggestion](https://github.com/bevyengine/bevy/pull/5103#discussion_r917281844))
- Add a `TextureAtlas` component, containing the atlas layout handle and
the section index
The difference between this solution and #5072 is that instead of the
`enum` approach is that we can more easily manipulate texture sheets
without any breaking changes for classic `SpriteBundle`s (@mockersf
[comment](https://github.com/bevyengine/bevy/pull/5072#issuecomment-1165836139))
Also, this approach is more *data oriented* extracting the
`Handle<Image>` and avoiding complex texture atlas manipulations to
retrieve the texture in both applicative and engine code.
With this method, the only difference between a `SpriteBundle` and a
`SpriteSheetBundle` is an **additional** component storing the atlas
handle and the index.
~~This solution can be applied to `bevy_ui` as well (see #5070).~~
EDIT: I also applied this solution to Bevy UI
## Changelog
- (**BREAKING**) Removed `TextureAtlasSprite`
- (**BREAKING**) Renamed `TextureAtlas` to `TextureAtlasLayout`
- (**BREAKING**) `SpriteSheetBundle`:
- Uses a `Sprite` instead of a `TextureAtlasSprite` component
- Has a `texture` field containing a `Handle<Image>` like the
`SpriteBundle`
- Has a new `TextureAtlas` component instead of a
`Handle<TextureAtlasLayout>`
- (**BREAKING**) `DynamicTextureAtlasBuilder::add_texture` takes an
additional `&Handle<Image>` parameter
- (**BREAKING**) `TextureAtlasLayout::from_grid` no longer takes a
`Handle<Image>` parameter
- (**BREAKING**) `TextureAtlasBuilder::finish` now returns a
`Result<(TextureAtlasLayout, Handle<Image>), _>`
- `bevy_text`:
- `GlyphAtlasInfo` stores the texture `Handle<Image>`
- `FontAtlas` stores the texture `Handle<Image>`
- `bevy_ui`:
- (**BREAKING**) Removed `UiAtlasImage` , the atlas bundle is now
identical to the `ImageBundle` with an additional `TextureAtlas`
## Migration Guide
* Sprites
```diff
fn my_system(
mut images: ResMut<Assets<Image>>,
- mut atlases: ResMut<Assets<TextureAtlas>>,
+ mut atlases: ResMut<Assets<TextureAtlasLayout>>,
asset_server: Res<AssetServer>
) {
let texture_handle: asset_server.load("my_texture.png");
- let layout = TextureAtlas::from_grid(texture_handle, Vec2::new(25.0, 25.0), 5, 5, None, None);
+ let layout = TextureAtlasLayout::from_grid(Vec2::new(25.0, 25.0), 5, 5, None, None);
let layout_handle = atlases.add(layout);
commands.spawn(SpriteSheetBundle {
- sprite: TextureAtlasSprite::new(0),
- texture_atlas: atlas_handle,
+ atlas: TextureAtlas {
+ layout: layout_handle,
+ index: 0
+ },
+ texture: texture_handle,
..Default::default()
});
}
```
* UI
```diff
fn my_system(
mut images: ResMut<Assets<Image>>,
- mut atlases: ResMut<Assets<TextureAtlas>>,
+ mut atlases: ResMut<Assets<TextureAtlasLayout>>,
asset_server: Res<AssetServer>
) {
let texture_handle: asset_server.load("my_texture.png");
- let layout = TextureAtlas::from_grid(texture_handle, Vec2::new(25.0, 25.0), 5, 5, None, None);
+ let layout = TextureAtlasLayout::from_grid(Vec2::new(25.0, 25.0), 5, 5, None, None);
let layout_handle = atlases.add(layout);
commands.spawn(AtlasImageBundle {
- texture_atlas_image: UiTextureAtlasImage {
- index: 0,
- flip_x: false,
- flip_y: false,
- },
- texture_atlas: atlas_handle,
+ atlas: TextureAtlas {
+ layout: layout_handle,
+ index: 0
+ },
+ image: UiImage {
+ texture: texture_handle,
+ flip_x: false,
+ flip_y: false,
+ },
..Default::default()
});
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- The
[`build-templated-pages`](4778fbeb65/tools/build-templated-pages)
tool is used to render the Markdown templates in the
[docs-template](4778fbeb65/docs-template)
folder.
- It depends on out outdated version of `toml_edit`.
## Solution
- Bump `toml_edit` to 0.21, disabling all features except `parse`.
# Objective
Add support for presenting each UI tree on a specific window and
viewport, while making as few breaking changes as possible.
This PR is meant to resolve the following issues at once, since they're
all related.
- Fixes#5622
- Fixes#5570
- Fixes#5621
Adopted #5892 , but started over since the current codebase diverged
significantly from the original PR branch. Also, I made a decision to
propagate component to children instead of recursively iterating over
nodes in search for the root.
## Solution
Add a new optional component that can be inserted to UI root nodes and
propagate to children to specify which camera it should render onto.
This is then used to get the render target and the viewport for that UI
tree. Since this component is optional, the default behavior should be
to render onto the single camera (if only one exist) and warn of
ambiguity if multiple cameras exist. This reduces the complexity for
users with just one camera, while giving control in contexts where it
matters.
## Changelog
- Adds `TargetCamera(Entity)` component to specify which camera should a
node tree be rendered into. If only one camera exists, this component is
optional.
- Adds an example of rendering UI to a texture and using it as a
material in a 3D world.
- Fixes recalculation of physical viewport size when target scale factor
changes. This can happen when the window is moved between displays with
different DPI.
- Changes examples to demonstrate assigning UI to different viewports
and windows and make interactions in an offset viewport testable.
- Removes `UiCameraConfig`. UI visibility now can be controlled via
combination of explicit `TargetCamera` and `Visibility` on the root
nodes.
---------
Co-authored-by: davier <bricedavier@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
- Update async channel to v2.
## Solution
- async channel doesn't support `send_blocking` on wasm anymore. So
don't compile the pipelined rendering plugin on wasm anymore.
- Replaces https://github.com/bevyengine/bevy/pull/10405
## Migration Guide
- The `PipelinedRendering` plugin is no longer exported on wasm. If you
are including it in your wasm builds you should remove it.
```rust
#[cfg(all(not(target_arch = "wasm32"))]
app.add_plugins(bevy_render::pipelined_rendering::PipelinedRenderingPlugin);
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Partial fix for #11235
- Fixes#11274
- Fixes#11320
- Fixes#11273
## Solution
- check update mode to trigger redraw request, instead of once a redraw
request has been triggered
- don't ignore device event in case of `Reactive` update mode
- make sure that at least 5 updates are triggered on application start
to ensure everything is correctly initialized
- trigger manual updates instead of relying on redraw requests when
there are no window or they are not visible
> Replaces #5213
# Objective
Implement sprite tiling and [9 slice
scaling](https://en.wikipedia.org/wiki/9-slice_scaling) for
`bevy_sprite`.
Allowing slice scaling and texture tiling.
Basic scaling vs 9 slice scaling:
Slicing example:
<img width="481" alt="Screenshot 2022-07-05 at 15 05 49"
src="https://user-images.githubusercontent.com/26703856/177336112-9e961af0-c0af-4197-aec9-430c1170a79d.png">
Tiling example:
<img width="1329" alt="Screenshot 2023-11-16 at 13 53 32"
src="https://github.com/bevyengine/bevy/assets/26703856/14db39b7-d9e0-4bc3-ba0e-b1f2db39ae8f">
# Solution
- `SpriteBundlue` now has a `scale_mode` component storing a
`SpriteScaleMode` enum with three variants:
- `Stretched` (default)
- `Tiled` to have sprites tile horizontally and/or vertically
- `Sliced` allowing 9 slicing the texture and optionally tile some
sections with a `Textureslicer`.
- `bevy_sprite` has two extra systems to compute a
`ComputedTextureSlices` if necessary,:
- One system react to changes on `Sprite`, `Handle<Image>` or
`SpriteScaleMode`
- The other listens to `AssetEvent<Image>` to compute slices on sprites
when the texture is ready or changed
- I updated the `bevy_sprite` extraction stage to extract potentially
multiple textures instead of one, depending on the presence of
`ComputedTextureSlices`
- I added two examples showcasing the slicing and tiling feature.
The addition of `ComputedTextureSlices` as a cache is to avoid querying
the image data, to retrieve its dimensions, every frame in a extract or
prepare stage. Also it reacts to changes so we can have stuff like this
(tiling example):
https://github.com/bevyengine/bevy/assets/26703856/a349a9f3-33c3-471f-8ef4-a0e5dfce3b01
# Related
- [ ] Once #5103 or #10099 is merged I can enable tiling and slicing for
texture sheets as ui
# To discuss
There is an other option, to consider slice/tiling as part of the asset,
using the new asset preprocessing but I have no clue on how to do it.
Also, instead of retrieving the Image dimensions, we could use the same
system as the sprite sheet and have the user give the image dimensions
directly (grid). But I think it's less user friendly
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Adds support for accessing raw extension data of loaded GLTF assets
## Solution
Via the GLTF loader settings, you can specify whether or not to include
the GLTF source. While not the ideal way of solving this problem,
modeling all of GLTF within Bevy just for extensions adds a lot of
complexity to the way Bevy handles GLTF currently. See the example GLTF
meta file and code
```
(
meta_format_version: "1.0",
asset: Load(
loader: "bevy_gltf::loader::GltfLoader",
settings: (
load_meshes: true,
load_cameras: true,
load_lights: true,
include_source: true,
),
),
)
```
```rs
pub fn load_gltf(mut commands: Commands, assets: Res<AssetServer>) {
let my_gltf = assets.load("test_platform.gltf");
commands.insert_resource(MyAssetPack {
spawned: false,
handle: my_gltf,
});
}
#[derive(Resource)]
pub struct MyAssetPack {
pub spawned: bool,
pub handle: Handle<Gltf>,
}
pub fn spawn_gltf_objects(
mut commands: Commands,
mut my: ResMut<MyAssetPack>,
assets_gltf: Res<Assets<Gltf>>,
) {
// This flag is used to because this system has to be run until the asset is loaded.
// If there's a better way of going about this I am unaware of it.
if my.spawned {
return;
}
if let Some(gltf) = assets_gltf.get(&my.handle) {
info!("spawn");
my.spawned = true;
// spawn the first scene in the file
commands.spawn(SceneBundle {
scene: gltf.scenes[0].clone(),
..Default::default()
});
let source = gltf.source.as_ref().unwrap();
info!("materials count {}", &source.materials().size_hint().0);
info!(
"materials ext is some {}",
&source.materials().next().unwrap().extensions().is_some()
);
}
}
```
---
## Changelog
Added support for GLTF extensions through including raw GLTF source via
loader flag `GltfLoaderSettings::include_source == true`, stored in
`Gltf::source: Option<gltf::Gltf>`
## Migration Guide
This will have issues with "asset migrations", as there is currently no
way for .meta files to be migrated. Attempting to migrate .meta files
without the new flag will yield the following error:
```
bevy_asset::server: Failed to deserialize meta for asset test_platform.gltf: Failed to deserialize asset meta: SpannedError { code: MissingStructField { field: "include_source", outer: Some("GltfLoaderSettings") }, position: Position { line: 9, col: 9 } }
```
This means users who want to migrate their .meta files will have to add
the `include_source: true,` setting to their meta files by hand.
# Objective
The ability to ignore the global volume doesn't seem desirable and
complicates the API.
#7706 added global volume and the ability to ignore it, but there was no
further discussion about whether that's useful. Feel free to discuss
here :)
## Solution
Replace the `Volume` type's functionality with the `VolumeLevel`. Remove
`VolumeLevel`.
I also removed `DerefMut` derive that effectively made the volume `pub`
and actually ensured that the volume isn't set below `0` even in release
builds.
## Migration Guide
The option to ignore the global volume using `Volume::Absolute` has been
removed and `Volume` now stores the volume level directly, removing the
need for the `VolumeLevel` struct.
# Objective
This PR is heavily inspired by
https://github.com/bevyengine/bevy/pull/7682
It aims to solve the same problem: allowing the user to extend the
tracing subscriber with extra layers.
(in my case, I'd like to use `use
metrics_tracing_context::{MetricsLayer, TracingContextLayer};`)
## Solution
I'm proposing a different api where the user has the opportunity to take
the existing `subscriber` and apply any transformations on it.
---
## Changelog
- Added a `update_subscriber` option on the `LogPlugin` that lets the
user modify the `subscriber` (for example to extend it with more tracing
`Layers`
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
- Added a new field `update_subscriber` in the `LogPlugin`
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
The table [here](https://github.com/nagisa/rust_tracy_client) shows
which versions of [Tracy](https://github.com/wolfpld/tracy) should be
used combined with which Rust deps.
Reading `bevy_log`'s `Cargo.toml` can be slightly confusing since the
exact versions are not picked from the same row.
Reading the produced `Cargo.lock` when building a Bevy example shows
that it's the most recent row that is resolved, but this should be more
clearly understood without needing to check the lock file.
## Solution
- Specify versions from the compatibility table including patch version
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
- `bevy_gizmos` cannot work if both `bevy_sprite` and `bevy_pbr` are
disabled.
- It silently fails to render, making it difficult to debug.
- Fixes#10984
## Solution
- Log an error message when `GizmoPlugin` is registered.
## Alternatives
I chose to log an error message, since it seemed the least intrusive of
potential solutions. Some alternatives include:
- Choosing one dependency as the default, neglecting the other. (#11035)
- Raising a compile error when neither dependency is enabled. ([See my
original
comment](https://github.com/bevyengine/bevy/issues/10984#issuecomment-1873420426))
- Raising a compile warning using a macro hack. ([Pre-RFC - Add
compile_warning!
macro](https://internals.rust-lang.org/t/pre-rfc-add-compile-warning-macro/9370/7?u=bd103))
- Logging a warning instead of an error.
- _This might be the better option. Let me know if I should change it._
---
## Changelog
- `bevy_gizmos` will now log an error if neither `bevy_pbr` nor
`bevy_sprite` are enabled.
# Objective
Unify flycam-style camera controller from the examples.
`parallax_mapping` controller was kept as is.
## Solution
Fixed some mouse movement & cursor grabbing related issues too.
