# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
# Objective
Fix#12728. Fix unsoundnesss from unhandled null characters in Android
logs.
## Solution
Use `CString` instead of using formatted Strings. Properly document the
safety invariants of the FFI call.
# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
Currently the built docs only shows the logo and favicon for the top
level `bevy` crate. This makes views like
https://docs.rs/bevy_ecs/latest/bevy_ecs/ look potentially unrelated to
the project at first glance.
## Solution
Reproduce the docs attributes for every crate that Bevy publishes.
Ideally this would be done with some workspace level Cargo.toml control,
but AFAICT, such support does not exist.
# Objective
- Allow configuring of platform-specific panic handlers.
- Remove the silent overwrite of the WASM panic handler
- Closes#12546
## Solution
- Separates the panic handler to a new plugin, `PanicHandlerPlugin`.
- `PanicHandlerPlugin` was added to `DefaultPlugins`.
- Can be disabled on `DefaultPlugins`, in the case someone needs to
configure custom panic handlers.
---
## Changelog
### Added
- A `PanicHandlerPlugin` was added to the `DefaultPlugins`, which now
sets sensible target-specific panic handlers.
### Changed
- On WASM, the panic stack trace was output to the console through the
`BevyLogPlugin`. Since this was separated out into `PanicHandlerPlugin`,
you may need to add the new `PanicHandlerPlugin` (included in
`DefaultPlugins`).
## Migration Guide
- If you used `MinimalPlugins` with `LogPlugin` for a WASM-target build,
you will need to add the new `PanicHandlerPlugin` to set the panic
behavior to output to the console. Otherwise, you will see the default
panic handler (opaque, `unreachable` errors in the console).
# Objective
Fix missing `TextBundle` (and many others) which are present in the main
crate as default features but optional in the sub-crate. See:
- https://docs.rs/bevy/0.13.0/bevy/ui/node_bundles/index.html
- https://docs.rs/bevy_ui/0.13.0/bevy_ui/node_bundles/index.html
~~There are probably other instances in other crates that I could track
down, but maybe "all-features = true" should be used by default in all
sub-crates? Not sure.~~ (There were many.) I only noticed this because
rust-analyzer's "open docs" features takes me to the sub-crate, not the
main one.
## Solution
Add "all-features = true" to docs.rs metadata for crates that use
features.
## Changelog
### Changed
- Unified features documented on docs.rs between main crate and
sub-crates
# Objective
In my library,
[`bevy_dev_console`](https://github.com/doonv/bevy_dev_console) I need
access to `App` within `LogPlugin::update_subscriber` in order to
communicate with the `App` from my custom `Layer`.
## Solution
Give access to `App`.
---
## Changelog
- Added access to `App` within `LogPlugin::update_subscriber`
## Migration Guide
`LogPlugin::update_subscriber` now has a `&mut App` parameter. If you
don't need access to `App`, you can ignore the parameter with an
underscore (`_`).
```diff,rust
- fn update_subscriber(subscriber: BoxedSubscriber) -> BoxedSubscriber {
+ fn update_subscriber(_: &mut App, subscriber: BoxedSubscriber) -> BoxedSubscriber {
Box::new(subscriber.with(CustomLayer))
}
```
# Objective
Improve code quality and prevent bugs.
## Solution
I removed the unnecessary wildcards from `<LogPlugin as Plugin>::build`.
I also changed the warnings that would occur if the subscriber/logger
was already set into errors.
Fixes#12016.
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Update `tracing-tracy`.
- Closes#11598.
## Solution
- Bump `tracing-tracy` to 0.11.0 and `tracy-client` alongside it to
0.17.0 to avoid duplicating that dependency in the deps tree.
- `TracyLayer` is now configurable on creation, so use the default
config.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
When working within `bevy_ecs`, we can't use the `log_once` macros due
to their placement in `bevy_log` - which depends on `bevy_ecs`. All this
create does is migrate those macros to the `bevy_utils` crate, while
still re-exporting them in `bevy_log`.
created to resolve this:
https://github.com/bevyengine/bevy/pull/11417#discussion_r1458100211
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
This PR is heavily inspired by
https://github.com/bevyengine/bevy/pull/7682
It aims to solve the same problem: allowing the user to extend the
tracing subscriber with extra layers.
(in my case, I'd like to use `use
metrics_tracing_context::{MetricsLayer, TracingContextLayer};`)
## Solution
I'm proposing a different api where the user has the opportunity to take
the existing `subscriber` and apply any transformations on it.
---
## Changelog
- Added a `update_subscriber` option on the `LogPlugin` that lets the
user modify the `subscriber` (for example to extend it with more tracing
`Layers`
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
- Added a new field `update_subscriber` in the `LogPlugin`
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
The table [here](https://github.com/nagisa/rust_tracy_client) shows
which versions of [Tracy](https://github.com/wolfpld/tracy) should be
used combined with which Rust deps.
Reading `bevy_log`'s `Cargo.toml` can be slightly confusing since the
exact versions are not picked from the same row.
Reading the produced `Cargo.lock` when building a Bevy example shows
that it's the most recent row that is resolved, but this should be more
clearly understood without needing to check the lock file.
## Solution
- Specify versions from the compatibility table including patch version
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
# Objective
When panic handler prints to stdout instead of stderr, I've observed two
outcomes with this PR test #11169:
- Sometimes output is mixed up, so it is not clear where one record ends
and another stards
- Sometimes output is lost
## Solution
Print to stderr.
## Changelog
- Panic handler in `LogPlugin` writes to stderr instead of stdin.
# Objective
Fixes#10291
This adds a way to easily log messages once within system which are
called every frame.
## Solution
Opted for a macro-based approach. The fact that the 'once' call is
tracked per call site makes the `log_once!()` macro very versatile and
easy-to-use. I suspect it will be very handy for all of us, but
especially beginners, to get some initial feedback from systems without
spamming up the place!
I've made the macro's return its internal `has_fired` state, for
situations in which that might be useful to know (trigger something else
alongside the log, for example).
Please let me know if I placed the macro's in the right location, and if
you would like me to do something more clever with the macro's
themselves, since its looking quite copy-pastey at the moment. I've
tried ways to replace 5 with 1 macro's, but no success yet.
One downside of this approach is: Say you wish to warn the user if a
resource is invalid. In this situation, the
`resource.is_valid()` check would still be performed every frame:
```rust
fn my_system(my_res: Res<MyResource>) {
if !my_res.is_valid() {
warn_once!("resource is invalid!");
}
}
```
If you want to prevent that, you would still need to introduce a local
boolean. I don't think this is a very big deal, as expensive checks
shouldn't be called every frame in any case.
## Changelog
Added: `trace_once!()`, `debug_once!()`, `info_once!()`, `warn_once!()`,
and `error_once!()` log macros which fire only once per call site.
# Objective
- Standardize fmt for toml files
## Solution
- Add [taplo](https://taplo.tamasfe.dev/) to CI (check for fmt and diff
for toml files), for context taplo is used by the most popular extension
in VScode [Even Better
TOML](https://marketplace.visualstudio.com/items?itemName=tamasfe.even-better-toml
- Add contribution section to explain toml fmt with taplo.
Now to pass CI you need to run `taplo fmt --option indent_string=" "` or
if you use vscode have the `Even Better TOML` extension with 4 spaces
for indent
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
Updates the requirements on
[tracy-client](https://github.com/nagisa/rust_tracy_client) to permit
the latest version.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f38da93ff1"><code>f38da93</code></a>
Test with 1.63.0 for MSRV</li>
<li><a
href="3621e20ccd"><code>3621e20</code></a>
tracing-client-sys: 0.21.1</li>
<li><a
href="bccf04b152"><code>bccf04b</code></a>
tracing-tracy: 0.10.3</li>
<li><a
href="bff27b5218"><code>bff27b5</code></a>
tracy-client: 0.15.2 -> 0.16.0 + fix auto update</li>
<li><a
href="9ed943bd6b"><code>9ed943b</code></a>
Add safe GPU API</li>
<li><a
href="60443cc55c"><code>60443cc</code></a>
Benches fell out of sync</li>
<li><a
href="c346a10998"><code>c346a10</code></a>
Fix version table typo</li>
<li><a
href="0763d2d16c"><code>0763d2d</code></a>
Bump MSRV to 1.60.0</li>
<li><a
href="d483998d48"><code>d483998</code></a>
Update Tracy client bindings to v0.9.1</li>
<li><a
href="dce363444f"><code>dce3634</code></a>
client-sys: 0.20.0, client: 0.15.1, tracing: 0.10.2</li>
<li>Additional commits viewable in <a
href="https://github.com/nagisa/rust_tracy_client/compare/tracy-client-v0.15.0...tracy-client-v0.16.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
CI-capable version of #9086
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
I created this manually as Github didn't want to run CI for the
workflow-generated PR. I'm guessing we didn't hit this in previous
releases because we used bors.
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
# Objective
- `bevy_log` writes logs to `stdout` (with ANSI formatting), which gets
in the way with program output and complicates parsing.
- Closes#8869
## Solution
- Change `bevy_log` to write to `stderr` instead of `stdout`
---
## Changelog
Changed:
- Logs write to `stderr` rather than `stdout` on desktop targets
## Migration Guide
- Capture logs from `stderr` instead of from `stdout`
- Use `2> output.log` on the command line to save `stderr` to a file
Updates the requirements on
[android_log-sys](https://github.com/nercury/android_log-sys-rs) to
permit the latest version.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/nercury/android_log-sys-rs/commits">compare
view</a></li>
</ul>
</details>
<br />
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>> **Note**
> Automatic rebases have been disabled on this pull request as it has
been open for over 30 days.
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
# Objective
Fixes#6862 (oh hey good catch @alice-i-cecile)
Bevy was failing to print events from `info!()` and friends to the console if the `trace_tracy` feature was enabled. It shouldn't be doing that.
## Solution
The problem was this per-layer filter that was added in #4320 to suppress a noisy per-frame event (which Tracy requires in order to properly close out a frame):
- The problem event's target was `"bevy_render::renderer"`, not `"tracy"`. - So, the filter wasn't specifically targeting the noisy event.
- Without a default, `tracing_subscriber::filter::Targets` will remove _everything_ that doesn't match an explicit target rule. - So, the filter _was_ silencing the noisy event, along with everything else.
This PR changes that filter to do what was probably intended in #4320: suppress ~any events more verbose than `ERROR` from `bevy_render::renderer`~ the one problematically noisy event, but allow anything else that already made it through the top-level filter_layer.
Also, adds a comment to clarify the intent of that filter, since it's otherwise a bit opaque and required some research.
---
## Changelog
Fixed a bug that hid console log messages when the `trace_tracy` feature was enabled.
Updates the requirements on [tracing-chrome](https://github.com/thoren-d/tracing-chrome) to permit the latest version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/thoren-d/tracing-chrome/releases">tracing-chrome's releases</a>.</em></p>
<blockquote>
<h2>Release v0.7.0</h2>
<ul>
<li>Add <code>start_new</code> to <code>FlushGuard</code>. You can now generate multiple traces in one run!</li>
<li>Clean up dependencies</li>
<li>Make events thread-scoped</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="8760d81206"><code>8760d81</code></a> Prepare for 0.7 (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/16">#16</a>)</li>
<li><a href="a30bfb78d2"><code>a30bfb7</code></a> Update documentation (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/15">#15</a>)</li>
<li><a href="3fe24ff44d"><code>3fe24ff</code></a> Save thread names for start_new (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/14">#14</a>)</li>
<li><a href="fa8a0ff8ba"><code>fa8a0ff</code></a> Adding "Start New" feature that allows a user to finalize writing to the (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/11">#11</a>)</li>
<li><a href="d3059d66b3"><code>d3059d6</code></a> Directly depend on crossbeam_channel (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/12">#12</a>)</li>
<li><a href="441dba5c21"><code>441dba5</code></a> change scope of instant events to thread (<a href="https://github-redirect.dependabot.com/thoren-d/tracing-chrome/issues/13">#13</a>)</li>
<li>See full diff in <a href="https://github.com/thoren-d/tracing-chrome/compare/v0.6.0...v0.7.0">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
# Objective
When a global tracing subscriber has already been set, `LogPlugin` panics with an error message explaining this. However, if a global logger has already been set, it simply panics on an unwrap.
#6426 mentiones the panic and has been fixed by unique plugins, but the panic can still occur if a logger has been set through different means or multiple apps are created, as in #4934. The solution to that specific case isn't clear; this PR only fixes the missing error message.
## Solution
- ~add error message to panic~
- turn into warning
This reverts commit 53d387f340.
# Objective
Reverts #6448. This didn't have the intended effect: we're now getting bevy::prelude shown in the docs again.
Co-authored-by: Alejandro Pascual <alejandro.pascual.pozo@gmail.com>
# Objective
- Right now re-exports are completely hidden in prelude docs.
- Fixes#6433
## Solution
- We could show the re-exports without inlining their documentation.
# Objective
- Build on #6336 for more plugin configurations
## Solution
- `LogSettings`, `ImageSettings` and `DefaultTaskPoolOptions` are now plugins settings rather than resources
---
## Changelog
- `LogSettings` plugin settings have been move to `LogPlugin`, `ImageSettings` to `ImagePlugin` and `DefaultTaskPoolOptions` to `CorePlugin`
## Migration Guide
The `LogSettings` settings have been moved from a resource to `LogPlugin` configuration:
```rust
// Old (Bevy 0.8)
app
.insert_resource(LogSettings {
level: Level::DEBUG,
filter: "wgpu=error,bevy_render=info,bevy_ecs=trace".to_string(),
})
.add_plugins(DefaultPlugins)
// New (Bevy 0.9)
app.add_plugins(DefaultPlugins.set(LogPlugin {
level: Level::DEBUG,
filter: "wgpu=error,bevy_render=info,bevy_ecs=trace".to_string(),
}))
```
The `ImageSettings` settings have been moved from a resource to `ImagePlugin` configuration:
```rust
// Old (Bevy 0.8)
app
.insert_resource(ImageSettings::default_nearest())
.add_plugins(DefaultPlugins)
// New (Bevy 0.9)
app.add_plugins(DefaultPlugins.set(ImagePlugin::default_nearest()))
```
The `DefaultTaskPoolOptions` settings have been moved from a resource to `CorePlugin::task_pool_options`:
```rust
// Old (Bevy 0.8)
app
.insert_resource(DefaultTaskPoolOptions::with_num_threads(4))
.add_plugins(DefaultPlugins)
// New (Bevy 0.9)
app.add_plugins(DefaultPlugins.set(CorePlugin {
task_pool_options: TaskPoolOptions::with_num_threads(4),
}))
```
# Objective
Fixes#5884#2879
Alternative to #2988#5885#2886
"Immutable" Plugin settings are currently represented as normal ECS resources, which are read as part of plugin init. This presents a number of problems:
1. If a user inserts the plugin settings resource after the plugin is initialized, it will be silently ignored (and use the defaults instead)
2. Users can modify the plugin settings resource after the plugin has been initialized. This creates a false sense of control over settings that can no longer be changed.
(1) and (2) are especially problematic and confusing for the `WindowDescriptor` resource, but this is a general problem.
## Solution
Immutable Plugin settings now live on each Plugin struct (ex: `WindowPlugin`). PluginGroups have been reworked to support overriding plugin values. This also removes the need for the `add_plugins_with` api, as the `add_plugins` api can use the builder pattern directly. Settings that can be used at runtime continue to be represented as ECS resources.
Plugins are now configured like this:
```rust
app.add_plugin(AssetPlugin {
watch_for_changes: true,
..default()
})
```
PluginGroups are now configured like this:
```rust
app.add_plugins(DefaultPlugins
.set(AssetPlugin {
watch_for_changes: true,
..default()
})
)
```
This is an alternative to #2988, which is similar. But I personally prefer this solution for a couple of reasons:
* ~~#2988 doesn't solve (1)~~ #2988 does solve (1) and will panic in that case. I was wrong!
* This PR directly ties plugin settings to Plugin types in a 1:1 relationship, rather than a loose "setup resource" <-> plugin coupling (where the setup resource is consumed by the first plugin that uses it).
* I'm not a huge fan of overloading the ECS resource concept and implementation for something that has very different use cases and constraints.
## Changelog
- PluginGroups can now be configured directly using the builder pattern. Individual plugin values can be overridden by using `plugin_group.set(SomePlugin {})`, which enables overriding default plugin values.
- `WindowDescriptor` plugin settings have been moved to `WindowPlugin` and `AssetServerSettings` have been moved to `AssetPlugin`
- `app.add_plugins_with` has been replaced by using `add_plugins` with the builder pattern.
## Migration Guide
The `WindowDescriptor` settings have been moved from a resource to `WindowPlugin::window`:
```rust
// Old (Bevy 0.8)
app
.insert_resource(WindowDescriptor {
width: 400.0,
..default()
})
.add_plugins(DefaultPlugins)
// New (Bevy 0.9)
app.add_plugins(DefaultPlugins.set(WindowPlugin {
window: WindowDescriptor {
width: 400.0,
..default()
},
..default()
}))
```
The `AssetServerSettings` resource has been removed in favor of direct `AssetPlugin` configuration:
```rust
// Old (Bevy 0.8)
app
.insert_resource(AssetServerSettings {
watch_for_changes: true,
..default()
})
.add_plugins(DefaultPlugins)
// New (Bevy 0.9)
app.add_plugins(DefaultPlugins.set(AssetPlugin {
watch_for_changes: true,
..default()
}))
```
`add_plugins_with` has been replaced by `add_plugins` in combination with the builder pattern:
```rust
// Old (Bevy 0.8)
app.add_plugins_with(DefaultPlugins, |group| group.disable::<AssetPlugin>());
// New (Bevy 0.9)
app.add_plugins(DefaultPlugins.build().disable::<AssetPlugin>());
```
*This PR description is an edited copy of #5007, written by @alice-i-cecile.*
# Objective
Follow-up to https://github.com/bevyengine/bevy/pull/2254. The `Resource` trait currently has a blanket implementation for all types that meet its bounds.
While ergonomic, this results in several drawbacks:
* it is possible to make confusing, silent mistakes such as inserting a function pointer (Foo) rather than a value (Foo::Bar) as a resource
* it is challenging to discover if a type is intended to be used as a resource
* we cannot later add customization options (see the [RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/27-derive-component.md) for the equivalent choice for Component).
* dependencies can use the same Rust type as a resource in invisibly conflicting ways
* raw Rust types used as resources cannot preserve privacy appropriately, as anyone able to access that type can read and write to internal values
* we cannot capture a definitive list of possible resources to display to users in an editor
## Notes to reviewers
* Review this commit-by-commit; there's effectively no back-tracking and there's a lot of churn in some of these commits.
*ira: My commits are not as well organized :')*
* I've relaxed the bound on Local to Send + Sync + 'static: I don't think these concerns apply there, so this can keep things simple. Storing e.g. a u32 in a Local is fine, because there's a variable name attached explaining what it does.
* I think this is a bad place for the Resource trait to live, but I've left it in place to make reviewing easier. IMO that's best tackled with https://github.com/bevyengine/bevy/issues/4981.
## Changelog
`Resource` is no longer automatically implemented for all matching types. Instead, use the new `#[derive(Resource)]` macro.
## Migration Guide
Add `#[derive(Resource)]` to all types you are using as a resource.
If you are using a third party type as a resource, wrap it in a tuple struct to bypass orphan rules. Consider deriving `Deref` and `DerefMut` to improve ergonomics.
`ClearColor` no longer implements `Component`. Using `ClearColor` as a component in 0.8 did nothing.
Use the `ClearColorConfig` in the `Camera3d` and `Camera2d` components instead.
Co-authored-by: Alice <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: devil-ira <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- I think our codebase is hit badly by rust-lang/rust-analyzer#11410
- None of our uses of cyclic dependencies are remotely necessary
- Note that these are false positives in rust-analyzer, however it's probably easier for us to work around this
- Note also that I haven't confirmed that this is causing rust-analyzer to not work very well, but it's not a bad guess.
## Solution
- Remove our cyclic dependencies
- Import the trick from #2851 for no-op plugin groups.
This upgrade should bring some significant performance improvements to
instrumentation. These are mostly achieved by disabling features (by
default) that are likely not widely used by default – collection of
callstacks and support for fibers that wasn't used for anything in
particular yet. For callstack collection it might be worthwhile to
provide a mechanism to enable this at runtime by calling
`TracyLayer::with_stackdepth`.
These should bring the cost of a single span down from 30+µs per span to
a more reasonable 1.5µs or so and down to the ns scale for events (on my
1st gen Ryzen machine, anyway.) There is still a fair amount of overhead
over plain tracy_client instrumentation in formatting and such, but
dealing with it requires significant effort and this is a
straightforward improvement to have for the time being.
Co-authored-by: Simonas Kazlauskas <git@kazlauskas.me>
Updates the requirements on [tracing-tracy](https://github.com/nagisa/rust_tracy_client) to permit the latest version.
<details>
<summary>Commits</summary>
<ul>
<li><a href="13b335a710"><code>13b335a</code></a> Remove ability to disable the client at runtime</li>
<li><a href="69e44977ee"><code>69e4497</code></a> The upgrades to 0.8.1</li>
<li><a href="c204b60c7a"><code>c204b60</code></a> Cancel the old test runs</li>
<li><a href="939bd04c1c"><code>939bd04</code></a> Remove the thread initialization calls</li>
<li><a href="7024e776bb"><code>7024e77</code></a> Update Tracy client bindings to v0.8.1</li>
<li><a href="5c54baa244"><code>5c54baa</code></a> tracy-client 0.12.7</li>
<li><a href="f183050b20"><code>f183050</code></a> Non-allocating <code>span!</code> macro</li>
<li><a href="15936ea751"><code>15936ea</code></a> tracy-client 0.12.6</li>
<li><a href="26d0c50542"><code>26d0c50</code></a> Relax literal the requirement of the create_plot macro so that it can be used...</li>
<li>See full diff in <a href="https://github.com/nagisa/rust_tracy_client/compare/tracing-tracy-v0.8.0...tracing-tracy-v0.9.0">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
