# Objective
Resolves#6197
Make it so that doc comments can be retrieved via reflection.
## Solution
Adds the new `documentation` feature to `bevy_reflect` (disabled by default).
When enabled, documentation can be found using `TypeInfo::doc` for reflected types:
```rust
/// Some struct.
///
/// # Example
///
/// ```ignore
/// let some_struct = SomeStruct;
/// ```
#[derive(Reflect)]
struct SomeStruct;
let info = <SomeStruct as Typed>::type_info();
assert_eq!(
Some(" Some struct.\n\n # Example\n\n ```ignore\n let some_struct = SomeStruct;\n ```"),
info.docs()
);
```
### Notes for Reviewers
The bulk of the files simply added the same 16 lines of code (with slightly different documentation). Most of the real changes occur in the `bevy_reflect_derive` files as well as in the added tests.
---
## Changelog
* Added `documentation` feature to `bevy_reflect`
* Added `TypeInfo::docs` method (and similar methods for all info types)
# Objective
Currently, surprising behavior happens when specifying `#[reflect(...)]` or `#[reflect_value(...)]` multiple times. Rather than merging the traits lists from all attributes, only the trait list from the last attribute is used. For example, in the following code, only the `Debug` and `Hash` traits are reflected and not `Default` or `PartialEq`:
```rs
#[derive(Debug, PartialEq, Hash, Default, Reflect)]
#[reflect(PartialEq, Default)]
#[reflect(Debug, Hash)]
struct Foo;
```
This is especially important when some traits should only be reflected under certain circumstances. For example, this previously had surprisingly behavior when the "serialize" feature is enabled:
```rs
#[derive(Debug, Hash, Reflect)]
#[reflect(Debug, Hash)]
#[cfg_attr(
feature = "serialize",
derive(Serialize, Deserialize),
reflect(Serialize, Deserialize)
]
struct Foo;
```
In addition, compile error messages generated from using the derive macro often point to the `#[derive(Reflect)]` rather than to the source of the error. It would be a lot more helpful if the compiler errors pointed to what specifically caused the error rather than just to the derive macro itself.
## Solution
Merge the trait lists in all `#[reflect(...)]` and `#[reflect_value(...)]` attributes. Additionally, make `#[reflect]` and `#[reflect_value]` mutually exclusive.
Additionally, span information is carried throughout some parts of the code now to ensure that error messages point to more useful places and better indicate what caused those errors. For example, `#[reflect(Hash, Hash)]` points to the second `Hash` as the source of an error. Also, in the following example, the compiler error now points to the `Hash` in `#[reflect(Hash)]` rather than to the derive macro:
```rs
#[derive(Reflect)]
#[reflect(Hash)] // <-- compiler error points to `Hash` for lack of a `Hash` implementation
struct Foo;
```
---
## Changelog
Changed
- Using multiple `#[reflect(...)]` or `#[reflect_value(...)]` attributes now merges the trait lists. For example, `#[reflect(Debug, Hash)] #[reflect(PartialEq, Default)]` is equivalent to `#[reflect(Debug, Hash, PartialEq, Default)]`.
- Multiple `#[reflect(...)]` and `#[reflect_value(...)]` attributes were previously accepted, but only the last attribute was respected.
- Using both `#[reflect(...)]` and `#[reflect_value(...)]` was previously accepted, but had surprising behavior. This is no longer accepted.
- Improved error messages for `#[derive(Reflect)]` by propagating useful span information. Many errors should now point to the source of those errors rather than to the derive macro.
# Objective
Currently, arrays cannot indexed using the reflection path API.
This change makes them behave like lists so `x.get_path("list[0]")` will behave the same way, whether x.list is a "List" (e.g. a Vec) or an array.
## Solution
When syntax is encounterd `[ <idx> ]` we check if the referenced type is either a `ReflectRef::List` or `ReflectRef::Array` (or `ReflectMut` for the mutable case). Since both provide the identical API for accessing entries, we do the same for both, although it requires code duplication as far as I can tell.
This was born from working on #5764, but since this seems to be an easier fix (and I am not sure if I can actually solve #5812) I figured it might be worth to split this out.
> Note: This is rebased off #4561 and can be viewed as a competitor to that PR. See `Comparison with #4561` section for details.
# Objective
The current serialization format used by `bevy_reflect` is both verbose and error-prone. Taking the following structs[^1] for example:
```rust
// -- src/inventory.rs
#[derive(Reflect)]
struct Inventory {
id: String,
max_storage: usize,
items: Vec<Item>
}
#[derive(Reflect)]
struct Item {
name: String
}
```
Given an inventory of a single item, this would serialize to something like:
```rust
// -- assets/inventory.ron
{
"type": "my_game::inventory::Inventory",
"struct": {
"id": {
"type": "alloc::string::String",
"value": "inv001",
},
"max_storage": {
"type": "usize",
"value": 10
},
"items": {
"type": "alloc::vec::Vec<alloc::string::String>",
"list": [
{
"type": "my_game::inventory::Item",
"struct": {
"name": {
"type": "alloc::string::String",
"value": "Pickaxe"
},
},
},
],
},
},
}
```
Aside from being really long and difficult to read, it also has a few "gotchas" that users need to be aware of if they want to edit the file manually. A major one is the requirement that you use the proper keys for a given type. For structs, you need `"struct"`. For lists, `"list"`. For tuple structs, `"tuple_struct"`. And so on.
It also ***requires*** that the `"type"` entry come before the actual data. Despite being a map— which in programming is almost always orderless by default— the entries need to be in a particular order. Failure to follow the ordering convention results in a failure to deserialize the data.
This makes it very prone to errors and annoyances.
## Solution
Using #4042, we can remove a lot of the boilerplate and metadata needed by this older system. Since we now have static access to type information, we can simplify our serialized data to look like:
```rust
// -- assets/inventory.ron
{
"my_game::inventory::Inventory": (
id: "inv001",
max_storage: 10,
items: [
(
name: "Pickaxe"
),
],
),
}
```
This is much more digestible and a lot less error-prone (no more key requirements and no more extra type names).
Additionally, it is a lot more familiar to users as it follows conventional serde mechanics. For example, the struct is represented with `(...)` when serialized to RON.
#### Custom Serialization
Additionally, this PR adds the opt-in ability to specify a custom serde implementation to be used rather than the one created via reflection. For example[^1]:
```rust
// -- src/inventory.rs
#[derive(Reflect, Serialize)]
#[reflect(Serialize)]
struct Item {
#[serde(alias = "id")]
name: String
}
```
```rust
// -- assets/inventory.ron
{
"my_game::inventory::Inventory": (
id: "inv001",
max_storage: 10,
items: [
(
id: "Pickaxe"
),
],
),
},
```
By allowing users to define their own serialization methods, we do two things:
1. We give more control over how data is serialized/deserialized to the end user
2. We avoid having to re-define serde's attributes and forcing users to apply both (e.g. we don't need a `#[reflect(alias)]` attribute).
### Improved Formats
One of the improvements this PR provides is the ability to represent data in ways that are more conventional and/or familiar to users. Many users are familiar with RON so here are some of the ways we can now represent data in RON:
###### Structs
```js
{
"my_crate::Foo": (
bar: 123
)
}
// OR
{
"my_crate::Foo": Foo(
bar: 123
)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "my_crate::Foo",
"struct": {
"bar": {
"type": "usize",
"value": 123
}
}
}
```
</details>
###### Tuples
```js
{
"(f32, f32)": (1.0, 2.0)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "(f32, f32)",
"tuple": [
{
"type": "f32",
"value": 1.0
},
{
"type": "f32",
"value": 2.0
}
]
}
```
</details>
###### Tuple Structs
```js
{
"my_crate::Bar": ("Hello World!")
}
// OR
{
"my_crate::Bar": Bar("Hello World!")
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "my_crate::Bar",
"tuple_struct": [
{
"type": "alloc::string::String",
"value": "Hello World!"
}
]
}
```
</details>
###### Arrays
It may be a bit surprising to some, but arrays now also use the tuple format. This is because they essentially _are_ tuples (a sequence of values with a fixed size), but only allow for homogenous types. Additionally, this is how RON handles them and is probably a result of the 32-capacity limit imposed on them (both by [serde](https://docs.rs/serde/latest/serde/trait.Serialize.html#impl-Serialize-for-%5BT%3B%2032%5D) and by [bevy_reflect](https://docs.rs/bevy/latest/bevy/reflect/trait.GetTypeRegistration.html#impl-GetTypeRegistration-for-%5BT%3B%2032%5D)).
```js
{
"[i32; 3]": (1, 2, 3)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "[i32; 3]",
"array": [
{
"type": "i32",
"value": 1
},
{
"type": "i32",
"value": 2
},
{
"type": "i32",
"value": 3
}
]
}
```
</details>
###### Enums
To make things simple, I'll just put a struct variant here, but the style applies to all variant types:
```js
{
"my_crate::ItemType": Consumable(
name: "Healing potion"
)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "my_crate::ItemType",
"enum": {
"variant": "Consumable",
"struct": {
"name": {
"type": "alloc::string::String",
"value": "Healing potion"
}
}
}
}
```
</details>
### Comparison with #4561
This PR is a rebased version of #4561. The reason for the split between the two is because this PR creates a _very_ different scene format. You may notice that the PR descriptions for either PR are pretty similar. This was done to better convey the changes depending on which (if any) gets merged first. If #4561 makes it in first, I will update this PR description accordingly.
---
## Changelog
* Re-worked serialization/deserialization for reflected types
* Added `TypedReflectDeserializer` for deserializing data with known `TypeInfo`
* Renamed `ReflectDeserializer` to `UntypedReflectDeserializer`
* ~~Replaced usages of `deserialize_any` with `deserialize_map` for non-self-describing formats~~ Reverted this change since there are still some issues that need to be sorted out (in a separate PR). By reverting this, crates like `bincode` can throw an error when attempting to deserialize non-self-describing formats (`bincode` results in `DeserializeAnyNotSupported`)
* Structs, tuples, tuple structs, arrays, and enums are now all de/serialized using conventional serde methods
## Migration Guide
* This PR reduces the verbosity of the scene format. Scenes will need to be updated accordingly:
```js
// Old format
{
"type": "my_game::item::Item",
"struct": {
"id": {
"type": "alloc::string::String",
"value": "bevycraft:stone",
},
"tags": {
"type": "alloc::vec::Vec<alloc::string::String>",
"list": [
{
"type": "alloc::string::String",
"value": "material"
},
],
},
}
// New format
{
"my_game::item::Item": (
id: "bevycraft:stone",
tags: ["material"]
)
}
```
[^1]: Some derives omitted for brevity.
# Objective
Add traits to events in `bevy_input` and `bevy_windows`: `Copy`, `Serialize`/`Deserialize`, `PartialEq`, and `Eq`, as requested in https://github.com/bevyengine/bevy/issues/6022, https://github.com/bevyengine/bevy/issues/6023, https://github.com/bevyengine/bevy/issues/6024.
## Solution
Added the traits to events in `bevy_input` and `bevy_windows`. Added dependency of `serde` in `Cargo.toml` of `bevy_input`.
## Migration Guide
If one has been `.clone()`'ing `bevy_input` events, Clippy will now complain about that. Just remove `.clone()` to solve.
## Other Notes
Some events in `bevy_input` had `f32` fields, so `Eq` trait was not derived for them.
Some events in `bevy_windows` had `String` fields, so `Copy` trait was not derived for them.
Co-authored-by: targrub <62773321+targrub@users.noreply.github.com>
# Objective
When trying derive `Debug` for type that has `DynamicEnum` it wasn't possible, since neither of `DynamicEnum`, `DynamicTuple`, `DynamicVariant` or `DynamicArray` implements `Debug`.
## Solution
Implement Debug for those types, using `derive` macro
---
## Changelog
- `DynamicEnum`, `DynamicTuple`, `DynamicVariant` and `DynamicArray` now implements `Debug`
# Objective
- To address problems outlined in https://github.com/bevyengine/bevy/issues/5245
## Solution
- Introduce `reflect(skip_serializing)` on top of `reflect(ignore)` which disables automatic serialisation to scenes, but does not disable reflection of the field.
---
## Changelog
- Adds:
- `bevy_reflect::serde::type_data` module
- `SerializationData` structure for describing which fields are to be/not to be ignored, automatically registers as type_data for struct-based types
- the `skip_serialization` flag for `#[reflect(...)]`
- Removes:
- ability to ignore Enum variants in serialization, since that didn't work anyway
## Migration Guide
- Change `#[reflect(ignore)]` to `#[reflect(skip_serializing)]` where disabling reflection is not the intended effect.
- Remove ignore/skip attributes from enum variants as these won't do anything anymore
# Objective
Fixes Issue #6005.
## Solution
Replaced WorldQuery with ReadOnlyWorldQuery on F generic in Query filters and QueryState to restrict its trait bound.
## Migration Guide
Query filter (`F`) generics are now bound by `ReadOnlyWorldQuery`, rather than `WorldQuery`. If for some reason you were requesting `Query<&A, &mut B>`, please use `Query<&A, With<B>>` instead.
# Objective
- I'm currently working on being able to call methods on reflect types (https://github.com/jakobhellermann/bevy_reflect_fns)
- for that, I'd like to add methods to the `Input<KeyCode>` resource (which I'm doing by registering type data)
- implementing `Reflect` is currently a requirement for having type data in the `TypeRegistry`
## Solution
- derive `Reflect` for `KeyCode` and `Input`
- uses `#[reflect_value]` for `Input`, since it's fields aren't supposed to be observable
- using reflect_value would need `Clone` bounds on `T`, but since all the methods (`.pressed` etc) already require `T: Copy`, I unified everything to requiring `Copy`
- add `Send + Sync + 'static` bounds, also required by reflect derive
## Unrelated improvements
I can extract into a separate PR if needed.
- the `Reflect` derive would previously ignore `#[reflect_value]` and only accept `#[reflect_value()]` which was a bit confusing
- the generated code used `val.clone()` on a reference, which is fine if `val` impls `Clone`, but otherwise also compiles with a worse error message. Change to `std::clone::Clone::clone(val)` instead which gives a neat `T does not implement Clone` error
# Objective
The documentation on `Reflect` doesn't account for the recently added reflection traits: [`Array`](https://github.com/bevyengine/bevy/pull/4701) and [`Enum`](https://github.com/bevyengine/bevy/pull/4761).
## Solution
Updated the documentation for `Reflect` to account for the `Array` and `Enum`.
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Update ron to 0.8.0
- Fix breaking changes
- Closes#5862
## Solution
- Removed now non-existing method call (behavior is now the same without it)
# Objective
Promote the `Rect` utility of `sprite::Rect`, which defines a rectangle
by its minimum and maximum corners, to the `bevy_math` crate to make it
available as a general math type to all crates without the need to
depend on the `bevy_sprite` crate.
Fixes#5575
## Solution
Move `sprite::Rect` into `bevy_math` and fix all uses.
Implement `Reflect` for `Rect` directly into the `bevy_reflect` crate by
having `bevy_reflect` depend on `bevy_math`. This looks like a new
dependency, but the `bevy_reflect` was "cheating" for other math types
by directly depending on `glam` to reflect other math types, thereby
giving the illusion that there was no dependency on `bevy_math`. In
practice conceptually Bevy's math types are reflected into the
`bevy_reflect` crate to avoid a dependency of that crate to a "lower
level" utility crate like `bevy_math` (which in turn would make
`bevy_reflect` be a dependency of most other crates, and increase the
risk of circular dependencies). So this change simply formalizes that
dependency in `Cargo.toml`.
The `Rect` struct is also augmented in this change with a collection of
utility methods to improve its usability. A few uses cases are updated
to use those new methods, resulting is more clear and concise syntax.
---
## Changelog
### Changed
- Moved the `sprite::Rect` type into `bevy_math`.
### Added
- Added several utility methods to the `math::Rect` type.
## Migration Guide
The `bevy::sprite::Rect` type moved to the math utility crate as
`bevy::math::Rect`. You should change your imports from `use
bevy::sprite::Rect` to `use bevy::math::Rect`.
# Objective
Sometimes it's useful to be able to retrieve all the fields of a container type so that they may be processed separately. With reflection, however, we typically only have access to references.
The only alternative is to "clone" the value using `Reflect::clone_value`. This, however, returns a Dynamic type in most cases. The solution there would be to use `FromReflect` instead, but this also has a problem in that it means we need to add `FromReflect` as an additional bound.
## Solution
Add a `drain` method to all container traits. This returns a `Vec<Box<dyn Reflect>>` (except for `Map` which returns `Vec<(Box<dyn Reflect>, Box<dyn Reflect>)>`).
This allows us to do things a lot simpler. For example, if we finished processing a struct and just need a particular value:
```rust
// === OLD === //
/// May or may not return a Dynamic*** value (even if `container` wasn't a `DynamicStruct`)
fn get_output(container: Box<dyn Struct>, output_index: usize) -> Box<dyn Reflect> {
container.field_at(output_index).unwrap().clone_value()
}
// === NEW === //
/// Returns _exactly_ whatever was in the given struct
fn get_output(container: Box<dyn Struct>, output_index: usize) -> Box<dyn Reflect> {
container.drain().remove(output_index).unwrap()
}
```
### Discussion
* Is `drain` the best method name? It makes sense that it "drains" all the fields and that it consumes the container in the process, but I'm open to alternatives.
---
## Changelog
* Added a `drain` method to the following traits:
* `Struct`
* `TupleStruct`
* `Tuple`
* `Array`
* `List`
* `Map`
* `Enum`
# Objective
- The reflection `List` trait does not have a `pop` function.
- Popping elements off a list is a common use case and is almost always supported by `List`-like types.
## Solution
- Add the `pop()` method to the `List` trait and add the appropriate implementations of this function.
## Migration Guide
- Any custom type that implements the `List` trait will now need to implement the `pop` method.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#5763
## Solution
Implemented as reflect value like the current `Range`. Is there a benefit to changing everything to a reflect struct?
# Objective
Some of the reflection impls for container types had unnecessary `Clone` bounds on their generic arguments. These come from before `FromReflect` when types were instead bound by `Reflect + Clone`. With `FromReflect` this is no longer necessary.
## Solution
Removed all leftover `Clone` bounds from types that use `FromReflect` instead.
## Note
I skipped `Result<T, E>`, `HashSet<T>`, and `Range<T>` since those do not use `FromReflect`. This should probably be handled in a separate PR since it would be a breaking change.
---
## Changelog
- Remove unnecessary `Clone` bounds on reflected containers
# Objective
#5658 made it so that `FromReflect` was used as the bound for `T` in `Option<T>`. However, it did not use this change effectively for the implementation of `Reflect::apply` (it was still using `take`, which would fail for Dynamic types).
Additionally, the changes were not consistent with other methods within the file, such as the ones for `Vec<T>` and `HashMap<K, V>`.
## Solution
Update `Option<T>` to fallback on `FromReflect` if `take` fails, instead of wholly relying on one or the other.
I also chose to update the error messages, as they weren't all too descriptive before.
---
## Changelog
- Use `FromReflect::from_reflect` as a fallback in the `Reflect::apply` implementation for `Option<T>`
# Objective
`SmallVec<T>` was missing a `GetTypeRegistration` impl.
## Solution
Added a `GetTypeRegistration` impl.
---
## Changelog
* Added a `GetTypeRegistration` impl for `SmallVec<T>`
# Objective
`FromReflect` is a commonly used component to the Reflect API. It's required as a bound for reflecting things like `Vec<T>` and `HashMap<K, V>` and is generally useful (if not necessary) to derive on most structs or enums.
Currently, however, it is not exported in `bevy_reflect`'s prelude. This means a module that uses `bevy_reflect` might have the following two lines:
```rust
use bevy_reflect::prelude::*;
use bevy_reflect::FromReflect;
```
Additionally, users of the full engine might need to put:
```rust
use bevy::prelude::*;
use bevy::reflect::FromReflect;
```
## Solution
Add `FromReflect` to the prelude of `bevy_reflect`.
---
## Changelog
- Added `FromReflect` to the prelude of `bevy_reflect`
# Objective
The reflection impls on `Option<T>` have the bound `T: Reflect + Clone`. This means that using `FromReflect` requires `Clone` even though we can normally get away with just `FromReflect`.
## Solution
Update the bounds on `Option<T>` to match that of `Vec<T>`, where `T: FromReflect`.
This helps remove a `Clone` implementation that may be undesired but added for the sole purpose of getting the code to compile.
---
## Changelog
* Reflection on `Option<T>` now has `T` bound by `FromReflect` rather than `Reflect + Clone`
* Added a `FromReflect` impl for `Instant`
## Migration Guide
If using `Option<T>` with Bevy's reflection API, `T` now needs to implement `FromReflect` rather than just `Clone`. This can be achieved easily by simply deriving `FromReflect`:
```rust
// OLD
#[derive(Reflect, Clone)]
struct Foo;
let reflected: Box<dyn Reflect> = Box::new(Some(Foo));
// NEW
#[derive(Reflect, FromReflect)]
struct Foo;
let reflected: Box<dyn Reflect> = Box::new(Some(Foo));
```
> Note: You can still derive `Clone`, but it's not required in order to compile.
# Objective
- The `Display` impl for `ReflectPathError` is pretty unspecific (e.g. `the current struct doesn't have a field with the given name`
- it has info for better messages available
## Solution
- make the display impl more descriptive by including values from the type
# Objective
Add reflect/from reflect impls for NonZero integer types. I'm guessing these haven't been added yet because no one has needed them as of yet.
# Objective
> This is a revival of #1347. Credit for the original PR should go to @Davier.
Currently, enums are treated as `ReflectRef::Value` types by `bevy_reflect`. Obviously, there needs to be better a better representation for enums using the reflection API.
## Solution
Based on prior work from @Davier, an `Enum` trait has been added as well as the ability to automatically implement it via the `Reflect` derive macro. This allows enums to be expressed dynamically:
```rust
#[derive(Reflect)]
enum Foo {
A,
B(usize),
C { value: f32 },
}
let mut foo = Foo::B(123);
assert_eq!("B", foo.variant_name());
assert_eq!(1, foo.field_len());
let new_value = DynamicEnum::from(Foo::C { value: 1.23 });
foo.apply(&new_value);
assert_eq!(Foo::C{value: 1.23}, foo);
```
### Features
#### Derive Macro
Use the `#[derive(Reflect)]` macro to automatically implement the `Enum` trait for enum definitions. Optionally, you can use `#[reflect(ignore)]` with both variants and variant fields, just like you can with structs. These ignored items will not be considered as part of the reflection and cannot be accessed via reflection.
```rust
#[derive(Reflect)]
enum TestEnum {
A,
// Uncomment to ignore all of `B`
// #[reflect(ignore)]
B(usize),
C {
// Uncomment to ignore only field `foo` of `C`
// #[reflect(ignore)]
foo: f32,
bar: bool,
},
}
```
#### Dynamic Enums
Enums may be created/represented dynamically via the `DynamicEnum` struct. The main purpose of this struct is to allow enums to be deserialized into a partial state and to allow dynamic patching. In order to ensure conversion from a `DynamicEnum` to a concrete enum type goes smoothly, be sure to add `FromReflect` to your derive macro.
```rust
let mut value = TestEnum::A;
// Create from a concrete instance
let dyn_enum = DynamicEnum::from(TestEnum::B(123));
value.apply(&dyn_enum);
assert_eq!(TestEnum::B(123), value);
// Create a purely dynamic instance
let dyn_enum = DynamicEnum::new("TestEnum", "A", ());
value.apply(&dyn_enum);
assert_eq!(TestEnum::A, value);
```
#### Variants
An enum value is always represented as one of its variants— never the enum in its entirety.
```rust
let value = TestEnum::A;
assert_eq!("A", value.variant_name());
// Since we are using the `A` variant, we cannot also be the `B` variant
assert_ne!("B", value.variant_name());
```
All variant types are representable within the `Enum` trait: unit, struct, and tuple.
You can get the current type like:
```rust
match value.variant_type() {
VariantType::Unit => println!("A unit variant!"),
VariantType::Struct => println!("A struct variant!"),
VariantType::Tuple => println!("A tuple variant!"),
}
```
> Notice that they don't contain any values representing the fields. These are purely tags.
If a variant has them, you can access the fields as well:
```rust
let mut value = TestEnum::C {
foo: 1.23,
bar: false
};
// Read/write specific fields
*value.field_mut("bar").unwrap() = true;
// Iterate over the entire collection of fields
for field in value.iter_fields() {
println!("{} = {:?}", field.name(), field.value());
}
```
#### Variant Swapping
It might seem odd to group all variant types under a single trait (why allow `iter_fields` on a unit variant?), but the reason this was done ~~is to easily allow *variant swapping*.~~ As I was recently drafting up the **Design Decisions** section, I discovered that other solutions could have been made to work with variant swapping. So while there are reasons to keep the all-in-one approach, variant swapping is _not_ one of them.
```rust
let mut value: Box<dyn Enum> = Box::new(TestEnum::A);
value.set(Box::new(TestEnum::B(123))).unwrap();
```
#### Serialization
Enums can be serialized and deserialized via reflection without needing to implement `Serialize` or `Deserialize` themselves (which can save thousands of lines of generated code). Below are the ways an enum can be serialized.
> Note, like the rest of reflection-based serialization, the order of the keys in these representations is important!
##### Unit
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "A"
}
}
```
##### Tuple
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "B",
"tuple": [
{
"type": "usize",
"value": 123
}
]
}
}
```
<details>
<summary>Effects on Option</summary>
This ends up making `Option` look a little ugly:
```json
{
"type": "core::option::Option<usize>",
"enum": {
"variant": "Some",
"tuple": [
{
"type": "usize",
"value": 123
}
]
}
}
```
</details>
##### Struct
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "C",
"struct": {
"foo": {
"type": "f32",
"value": 1.23
},
"bar": {
"type": "bool",
"value": false
}
}
}
}
```
## Design Decisions
<details>
<summary><strong>View Section</strong></summary>
This section is here to provide some context for why certain decisions were made for this PR, alternatives that could have been used instead, and what could be improved upon in the future.
### Variant Representation
One of the biggest decisions was to decide on how to represent variants. The current design uses a "all-in-one" design where unit, tuple, and struct variants are all simultaneously represented by the `Enum` trait. This is not the only way it could have been done, though.
#### Alternatives
##### 1. Variant Traits
One way of representing variants would be to define traits for each variant, implementing them whenever an enum featured at least one instance of them. This would allow us to define variants like:
```rust
pub trait Enum: Reflect {
fn variant(&self) -> Variant;
}
pub enum Variant<'a> {
Unit,
Tuple(&'a dyn TupleVariant),
Struct(&'a dyn StructVariant),
}
pub trait TupleVariant {
fn field_len(&self) -> usize;
// ...
}
```
And then do things like:
```rust
fn get_tuple_len(foo: &dyn Enum) -> usize {
match foo.variant() {
Variant::Tuple(tuple) => tuple.field_len(),
_ => panic!("not a tuple variant!")
}
}
```
The reason this PR does not go with this approach is because of the fact that variants are not separate types. In other words, we cannot implement traits on specific variants— these cover the *entire* enum. This means we offer an easy footgun:
```rust
let foo: Option<i32> = None;
let my_enum = Box::new(foo) as Box<dyn TupleVariant>;
```
Here, `my_enum` contains `foo`, which is a unit variant. However, since we need to implement `TupleVariant` for `Option` as a whole, it's possible to perform such a cast. This is obviously wrong, but could easily go unnoticed. So unfortunately, this makes it not a good candidate for representing variants.
##### 2. Variant Structs
To get around the issue of traits necessarily needing to apply to both the enum and its variants, we could instead use structs that are created on a per-variant basis. This was also considered but was ultimately [[removed](71d27ab3c6) due to concerns about allocations.
Each variant struct would probably look something like:
```rust
pub trait Enum: Reflect {
fn variant_mut(&self) -> VariantMut;
}
pub enum VariantMut<'a> {
Unit,
Tuple(TupleVariantMut),
Struct(StructVariantMut),
}
struct StructVariantMut<'a> {
fields: Vec<&'a mut dyn Reflect>,
field_indices: HashMap<Cow<'static, str>, usize>
}
```
This allows us to isolate struct variants into their own defined struct and define methods specifically for their use. It also prevents users from casting to it since it's not a trait. However, this is not an optimal solution. Both `field_indices` and `fields` will require an allocation (remember, a `Box<[T]>` still requires a `Vec<T>` in order to be constructed). This *might* be a problem if called frequently enough.
##### 3. Generated Structs
The original design, implemented by @Davier, instead generates structs specific for each variant. So if we had a variant path like `Foo::Bar`, we'd generate a struct named `FooBarWrapper`. This would be newtyped around the original enum and forward tuple or struct methods to the enum with the chosen variant.
Because it involved using the `Tuple` and `Struct` traits (which are also both bound on `Reflect`), this meant a bit more code had to be generated. For a single struct variant with one field, the generated code amounted to ~110LoC. However, each new field added to that variant only added ~6 more LoC.
In order to work properly, the enum had to be transmuted to the generated struct:
```rust
fn variant(&self) -> crate::EnumVariant<'_> {
match self {
Foo::Bar {value: i32} => {
let wrapper_ref = unsafe {
std::mem::transmute::<&Self, &FooBarWrapper>(self)
};
crate::EnumVariant::Struct(wrapper_ref as &dyn crate::Struct)
}
}
}
```
This works because `FooBarWrapper` is defined as `repr(transparent)`.
Out of all the alternatives, this would probably be the one most likely to be used again in the future. The reasons for why this PR did not continue to use it was because:
* To reduce generated code (which would hopefully speed up compile times)
* To avoid cluttering the code with generated structs not visible to the user
* To keep bevy_reflect simple and extensible (these generated structs act as proxies and might not play well with current or future systems)
* To avoid additional unsafe blocks
* My own misunderstanding of @Davier's code
That last point is obviously on me. I misjudged the code to be too unsafe and unable to handle variant swapping (which it probably could) when I was rebasing it. Looking over it again when writing up this whole section, I see that it was actually a pretty clever way of handling variant representation.
#### Benefits of All-in-One
As stated before, the current implementation uses an all-in-one approach. All variants are capable of containing fields as far as `Enum` is concerned. This provides a few benefits that the alternatives do not (reduced indirection, safer code, etc.).
The biggest benefit, though, is direct field access. Rather than forcing users to have to go through pattern matching, we grant direct access to the fields contained by the current variant. The reason we can do this is because all of the pattern matching happens internally. Getting the field at index `2` will automatically return `Some(...)` for the current variant if it has a field at that index or `None` if it doesn't (or can't).
This could be useful for scenarios where the variant has already been verified or just set/swapped (or even where the type of variant doesn't matter):
```rust
let dyn_enum: &mut dyn Enum = &mut Foo::Bar {value: 123};
// We know it's the `Bar` variant
let field = dyn_enum.field("value").unwrap();
```
Reflection is not a type-safe abstraction— almost every return value is wrapped in `Option<...>`. There are plenty of places to check and recheck that a value is what Reflect says it is. Forcing users to have to go through `match` each time they want to access a field might just be an extra step among dozens of other verification processes.
Some might disagree, but ultimately, my view is that the benefit here is an improvement to the ergonomics and usability of reflected enums.
</details>
---
## Changelog
### Added
* Added `Enum` trait
* Added `Enum` impl to `Reflect` derive macro
* Added `DynamicEnum` struct
* Added `DynamicVariant`
* Added `EnumInfo`
* Added `VariantInfo`
* Added `StructVariantInfo`
* Added `TupleVariantInfo`
* Added `UnitVariantInfo`
* Added serializtion/deserialization support for enums
* Added `EnumSerializer`
* Added `VariantType`
* Added `VariantFieldIter`
* Added `VariantField`
* Added `enum_partial_eq(...)`
* Added `enum_hash(...)`
### Changed
* `Option<T>` now implements `Enum`
* `bevy_window` now depends on `bevy_reflect`
* Implemented `Reflect` and `FromReflect` for `WindowId`
* Derive `FromReflect` on `PerspectiveProjection`
* Derive `FromReflect` on `OrthographicProjection`
* Derive `FromReflect` on `WindowOrigin`
* Derive `FromReflect` on `ScalingMode`
* Derive `FromReflect` on `DepthCalculation`
## Migration Guide
* Enums no longer need to be treated as values and usages of `#[reflect_value(...)]` can be removed or replaced by `#[reflect(...)]`
* Enums (including `Option<T>`) now take a different format when serializing. The format is described above, but this may cause issues for existing scenes that make use of enums.
---
Also shout out to @nicopap for helping clean up some of the code here! It's a big feature so help like this is really appreciated!
Co-authored-by: Gino Valente <gino.valente.code@gmail.com>
# Objective
Some generic types like `Option<T>`, `Vec<T>` and `HashMap<K, V>` implement `Reflect` when where their generic types `T`/`K`/`V` implement `Serialize + for<'de> Deserialize<'de>`.
This is so that in their `GetTypeRegistration` impl they can insert the `ReflectSerialize` and `ReflectDeserialize` type data structs.
This has the annoying side effect that if your struct contains a `Option<NonSerdeStruct>` you won't be able to derive reflect (https://github.com/bevyengine/bevy/issues/4054).
## Solution
- remove the `Serialize + Deserialize` bounds on wrapper types
- this means that `ReflectSerialize` and `ReflectDeserialize` will no longer be inserted even for `.register::<Option<DoesImplSerde>>()`
- add `register_type_data<T, D>` shorthand for `registry.get_mut(T).insert(D::from_type<T>())`
- require users to register their specific generic types **and the serde types** separately like
```rust
.register_type::<Option<String>>()
.register_type_data::<Option<String>, ReflectSerialize>()
.register_type_data::<Option<String>, ReflectDeserialize>()
```
I believe this is the best we can do for extensibility and convenience without specialization.
## Changelog
- `.register_type` for generic types like `Option<T>`, `Vec<T>`, `HashMap<K, V>` will no longer insert `ReflectSerialize` and `ReflectDeserialize` type data. Instead you need to register it separately for concrete generic types like so:
```rust
.register_type::<Option<String>>()
.register_type_data::<Option<String>, ReflectSerialize>()
.register_type_data::<Option<String>, ReflectDeserialize>()
```
TODO: more docs and tweaks to the scene example to demonstrate registering generic types.
# Objective
https://github.com/bevyengine/bevy/pull/4447 adds functions that can fetch resources/components as `*const ()` ptr by providing the `ComponentId`. This alone is not enough for them to be usable safely with reflection, because there is no general way to go from the raw pointer to a `&dyn Reflect` which is the pointer + a pointer to the VTable of the `Reflect` impl.
By adding a `ReflectFromPtr` type that is included in the type type registration when deriving `Reflect`, safe functions can be implemented in scripting languages that don't assume a type layout and can access the component data via reflection:
```rust
#[derive(Reflect)]
struct StringResource {
value: String
}
```
```lua
local res_id = world:resource_id_by_name("example::StringResource")
local res = world:resource(res_id)
print(res.value)
```
## Solution
1. add a `ReflectFromPtr` type with a `FromType<T: Reflect>` implementation and the following methods:
- ` pub unsafe fn as_reflect_ptr<'a>(&self, val: Ptr<'a>) -> &'a dyn Reflect`
- ` pub unsafe fn as_reflect_ptr_mut<'a>(&self, val: PtrMut<'a>) -> &'a mud dyn Reflect`
Safety requirements of the methods are that you need to check that the `ReflectFromPtr` was constructed for the correct type.
2. add that type to the `TypeRegistration` in the `GetTypeRegistration` impl generated by `#[derive(Reflect)]`.
This is different to other reflected traits because it doesn't need `#[reflect(ReflectReflectFromPtr)]` which IMO should be there by default.
Co-authored-by: Jakob Hellermann <hellermann@sipgate.de>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Remove unnecessary calls to `iter()`/`iter_mut()`.
Mainly updates the use of queries in our code, docs, and examples.
```rust
// From
for _ in list.iter() {
for _ in list.iter_mut() {
// To
for _ in &list {
for _ in &mut list {
```
We already enable the pedantic lint [clippy::explicit_iter_loop](https://rust-lang.github.io/rust-clippy/stable/) inside of Bevy. However, this only warns for a few known types from the standard library.
## Note for reviewers
As you can see the additions and deletions are exactly equal.
Maybe give it a quick skim to check I didn't sneak in a crypto miner, but you don't have to torture yourself by reading every line.
I already experienced enough pain making this PR :)
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- To implement `Reflect` for more glam types.
## Solution
insert `impl_reflect_struct` invocations for more glam types. I am not sure about the boolean vectors, since none of them implement `Serde::Serialize/Deserialize`, and the SIMD versions don't have public fields.
I do still think implementing reflection is useful for BVec's since then they can be incorporated into `Reflect`'ed components and set dynamically even if as a whole + it's more consistent.
## Changelog
Implemented `Reflect` for the following types
- BVec2
- BVec3
- **BVec3A** (on simd supported platforms only)
- BVec4
- **BVec4A** (on simd supported platforms only)
- Mat2
- Mat3A
- DMat2
- Affine2
- Affine3A
- DAffine2
- DAffine3
- EulerRot
# Objective
`glam` is an optional feature in `bevy_reflect` and there is a separate `mod test { #[cfg(feature = "glam")] mod glam { .. }}`.
The `reflect_downcast` test is not in that module and doesn't depend on glam, which breaks `cargo test -p bevy_reflect` without the `glam` feature.
## Solution
- Remove the glam types from the test, they're not relevant to it
# Objective
This is a rebase of #3701 which is currently scheduled for 0.8 but is marked for adoption.
> Fixes https://github.com/bevyengine/bevy/discussions/3609
## Solution
> - add an `insert_boxed()` method on the `Map` trait
> - implement it for `HashMap` using a new `FromReflect` generic bound
> - add a `map_apply()` helper method to implement `Map::apply()`, that inserts new values instead of ignoring them
---
## Changelog
TODO
Co-authored-by: james7132 <contact@jamessliu.com>
Removed `const_vec2`/`const_vec3`
and replaced with equivalent `.from_array`.
# Objective
Fixes#5112
## Solution
- `encase` needs to update to `glam` as well. See teoxoy/encase#4 on progress on that.
- `hexasphere` also needs to be updated, see OptimisticPeach/hexasphere#12.
# Summary
This method strips a long type name like `bevy::render:📷:PerspectiveCameraBundle` down into the bare type name (`PerspectiveCameraBundle`). This is generally useful utility method, needed by #4299 and #5121.
As a result:
- This method was moved to `bevy_utils` for easier reuse.
- The legibility and robustness of this method has been significantly improved.
- Harder test cases have been added.
This change was split out of #4299 to unblock it and make merging / reviewing the rest of those changes easier.
## Changelog
- added `bevy_utils::get_short_name`, which strips the path from a type name for convenient display.
- removed the `TypeRegistry::get_short_name` method. Use the function in `bevy_utils` instead.
# Objective
Fixes#5153
## Solution
Search for all enums and manually check if they have default impls that can use this new derive.
By my reckoning:
| enum | num |
|-|-|
| total | 159 |
| has default impl | 29 |
| default is unit variant | 23 |
# Objective
Fix some typos in bevy_reflect's readme
## Solution
- Change `Foo`'s `d` field to be of type `Vec<Baz>`
- Format `&dyn Reflect` to be monospace
# Objective
Currently, `Reflect` is unsafe to implement because of a contract in which `any` and `any_mut` must return `self`, or `downcast` will cause UB. This PR makes `Reflect` safe, makes `downcast` not use unsafe, and eliminates this contract.
## Solution
This PR adds a method to `Reflect`, `any`. It also renames the old `any` to `as_any`.
`any` now takes a `Box<Self>` and returns a `Box<dyn Any>`.
---
## Changelog
### Added:
- `any()` method
- `represents()` method
### Changed:
- `Reflect` is now a safe trait
- `downcast()` is now safe
- The old `any` is now called `as_any`, and `any_mut` is now `as_mut_any`
## Migration Guide
- Reflect derives should not have to change anything
- Manual reflect impls will need to remove the `unsafe` keyword, add `any()` implementations, and rename the old `any` and `any_mut` to `as_any` and `as_mut_any`.
- Calls to `any`/`any_mut` must be changed to `as_any`/`as_mut_any`
## Points of discussion:
- Should renaming `any` be avoided and instead name the new method `any_box`?
- ~~Could there be a performance regression from avoiding the unsafe? I doubt it, but this change does seem to introduce redundant checks.~~
- ~~Could/should `is` and `type_id()` be implemented differently? For example, moving `is` onto `Reflect` as an `fn(&self, TypeId) -> bool`~~
Co-authored-by: PROMETHIA-27 <42193387+PROMETHIA-27@users.noreply.github.com>
builds on top of #4780
# Objective
`Reflect` and `Serialize` are currently very tied together because `Reflect` has a `fn serialize(&self) -> Option<Serializable<'_>>` method. Because of that, we can either implement `Reflect` for types like `Option<T>` with `T: Serialize` and have `fn serialize` be implemented, or without the bound but having `fn serialize` return `None`.
By separating `ReflectSerialize` into a separate type (like how it already is for `ReflectDeserialize`, `ReflectDefault`), we could separately `.register::<Option<T>>()` and `.register_data::<Option<T>, ReflectSerialize>()` only if the type `T: Serialize`.
This PR does not change the registration but allows it to be changed in a future PR.
## Solution
- add the type
```rust
struct ReflectSerialize { .. }
impl<T: Reflect + Serialize> FromType<T> for ReflectSerialize { .. }
```
- remove `#[reflect(Serialize)]` special casing.
- when serializing reflect value types, look for `ReflectSerialize` in the `TypeRegistry` instead of calling `value.serialize()`
# Objective
- Update hashbrown to 0.12
## Solution
- Replace #4004
- As the 0.12 is already in Bevy dependency tree, it shouldn't be an issue to update
- The exception for the 0.11 should be removed once https://github.com/zakarumych/gpu-descriptor/pull/21 is merged and released
- Also removed a few exceptions that weren't needed anymore
# Objective
> Resolves#4504
It can be helpful to have access to type information without requiring an instance of that type. Especially for `Reflect`, a lot of the gathered type information is known at compile-time and should not necessarily require an instance.
## Solution
Created a dedicated `TypeInfo` enum to store static type information. All types that derive `Reflect` now also implement the newly created `Typed` trait:
```rust
pub trait Typed: Reflect {
fn type_info() -> &'static TypeInfo;
}
```
> Note: This trait was made separate from `Reflect` due to `Sized` restrictions.
If you only have access to a `dyn Reflect`, just call `.get_type_info()` on it. This new trait method on `Reflect` should return the same value as if you had called it statically.
If all you have is a `TypeId` or type name, you can get the `TypeInfo` directly from the registry using the `TypeRegistry::get_type_info` method (assuming it was registered).
### Usage
Below is an example of working with `TypeInfo`. As you can see, we don't have to generate an instance of `MyTupleStruct` in order to get this information.
```rust
#[derive(Reflect)]
struct MyTupleStruct(usize, i32, MyStruct);
let info = MyTupleStruct::type_info();
if let TypeInfo::TupleStruct(info) = info {
assert!(info.is::<MyTupleStruct>());
assert_eq!(std::any::type_name::<MyTupleStruct>(), info.type_name());
assert!(info.field_at(1).unwrap().is::<i32>());
} else {
panic!("Expected `TypeInfo::TupleStruct`");
}
```
### Manual Implementations
It's not recommended to manually implement `Typed` yourself, but if you must, you can use the `TypeInfoCell` to automatically create and manage the static `TypeInfo`s for you (which is very helpful for blanket/generic impls):
```rust
use bevy_reflect::{Reflect, TupleStructInfo, TypeInfo, UnnamedField};
use bevy_reflect::utility::TypeInfoCell;
struct Foo<T: Reflect>(T);
impl<T: Reflect> Typed for Foo<T> {
fn type_info() -> &'static TypeInfo {
static CELL: TypeInfoCell = TypeInfoCell::generic();
CELL.get_or_insert::<Self, _>(|| {
let fields = [UnnamedField:🆕:<T>()];
let info = TupleStructInfo:🆕:<Self>(&fields);
TypeInfo::TupleStruct(info)
})
}
}
```
## Benefits
One major benefit is that this opens the door to other serialization methods. Since we can get all the type info at compile time, we can know how to properly deserialize something like:
```rust
#[derive(Reflect)]
struct MyType {
foo: usize,
bar: Vec<String>
}
// RON to be deserialized:
(
type: "my_crate::MyType", // <- We now know how to deserialize the rest of this object
value: {
// "foo" is a value type matching "usize"
"foo": 123,
// "bar" is a list type matching "Vec<String>" with item type "String"
"bar": ["a", "b", "c"]
}
)
```
Not only is this more compact, but it has better compatibility (we can change the type of `"foo"` to `i32` without having to update our serialized data).
Of course, serialization/deserialization strategies like this may need to be discussed and fully considered before possibly making a change. However, we will be better equipped to do that now that we can access type information right from the registry.
## Discussion
Some items to discuss:
1. Duplication. There's a bit of overlap with the existing traits/structs since they require an instance of the type while the type info structs do not (for example, `Struct::field_at(&self, index: usize)` and `StructInfo::field_at(&self, index: usize)`, though only `StructInfo` is accessible without an instance object). Is this okay, or do we want to handle it in another way?
2. Should `TypeInfo::Dynamic` be removed? Since the dynamic types don't have type information available at runtime, we could consider them `TypeInfo::Value`s (or just even just `TypeInfo::Struct`). The intention with `TypeInfo::Dynamic` was to keep the distinction from these dynamic types and actual structs/values since users might incorrectly believe the methods of the dynamic type's info struct would map to some contained data (which isn't possible statically).
4. General usefulness of this change, including missing/unnecessary parts.
5. Possible changes to the scene format? (One possible issue with changing it like in the example above might be that we'd have to be careful when handling generic or trait object types.)
## Compile Tests
I ran a few tests to compare compile times (as suggested [here](https://github.com/bevyengine/bevy/pull/4042#discussion_r876408143)). I toggled `Reflect` and `FromReflect` derive macros using `cfg_attr` for both this PR (aa5178e773) and main (c309acd432).
<details>
<summary>See More</summary>
The test project included 250 of the following structs (as well as a few other structs):
```rust
#[derive(Default)]
#[cfg_attr(feature = "reflect", derive(Reflect))]
#[cfg_attr(feature = "from_reflect", derive(FromReflect))]
pub struct Big001 {
inventory: Inventory,
foo: usize,
bar: String,
baz: ItemDescriptor,
items: [Item; 20],
hello: Option<String>,
world: HashMap<i32, String>,
okay: (isize, usize, /* wesize */),
nope: ((String, String), (f32, f32)),
blah: Cow<'static, str>,
}
```
> I don't know if the compiler can optimize all these duplicate structs away, but I think it's fine either way. We're comparing times, not finding the absolute worst-case time.
I only ran each build 3 times using `cargo build --timings` (thank you @devil-ira), each of which were preceeded by a `cargo clean --package bevy_reflect_compile_test`.
Here are the times I got:
| Test | Test 1 | Test 2 | Test 3 | Average |
| -------------------------------- | ------ | ------ | ------ | ------- |
| Main | 1.7s | 3.1s | 1.9s | 2.33s |
| Main + `Reflect` | 8.3s | 8.6s | 8.1s | 8.33s |
| Main + `Reflect` + `FromReflect` | 11.6s | 11.8s | 13.8s | 12.4s |
| PR | 3.5s | 1.8s | 1.9s | 2.4s |
| PR + `Reflect` | 9.2s | 8.8s | 9.3s | 9.1s |
| PR + `Reflect` + `FromReflect` | 12.9s | 12.3s | 12.5s | 12.56s |
</details>
---
## Future Work
Even though everything could probably be made `const`, we unfortunately can't. This is because `TypeId::of::<T>()` is not yet `const` (see https://github.com/rust-lang/rust/issues/77125). When it does get stabilized, it would probably be worth coming back and making things `const`.
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
# Objective
Most of our `Iterator` impls satisfy the requirements of `std::iter::FusedIterator`, which has internal specialization that optimizes `Interator::fuse`. The std lib iterator combinators do have a few that rely on `fuse`, so this could optimize those use cases. I don't think we're using any of them in the engine itself, but beyond a light increase in compile time, it doesn't hurt to implement the trait.
## Solution
Implement the trait for all eligible iterators in first party crates. Also add a missing `ExactSizeIterator` on an iterator that could use it.
# Objective
- Users of bevy_reflect probably always want primitive types registered.
## Solution
- Register them by default.
---
This is a minor incremental change along the path of [removing catch-all functionality from bevy_core](https://github.com/bevyengine/bevy/issues/2931).
# Objective
`bevy_reflect` as different kinds of reflected types (each with their own trait), `trait Struct: Reflect`, `trait List: Reflect`, `trait Map: Reflect`, ...
Types that don't fit either of those are called reflect value types, they are opaque and can't be deconstructed further.
`bevy_reflect` can serialize `dyn Reflect` values. Any container types (struct, list, map) get deconstructed and their elements serialized separately, which can all happen without serde being involved ever (happens [here](https://github.com/bevyengine/bevy/blob/main/crates/bevy_reflect/src/serde/ser.rs#L50-L85=)).
The only point at which we require types to be serde-serializable is for *value types* (happens [here](https://github.com/bevyengine/bevy/blob/main/crates/bevy_reflect/src/serde/ser.rs#L104=)).
So reflect array serializing is solved, since arrays are container types which don't require serde.
#1213 also introduced added the `serialize` method and `Serialize` impls for `dyn Array` and `DynamicArray` which use their element's `Reflect::serializable` function. This is 1. unnecessary, because it is not used for array serialization, and 2. annoying for removing the `Serialize` bound on container types, because these impls don't have access to the `TypeRegistry`, so we can't move the serialization code there.
# Solution
Remove these impls and `fn serialize`. It's not used and annoying for other changes.
# Objective
Currently, `FromReflect` makes a couple assumptions:
* Ignored fields must implement `Default`
* Active fields must implement `FromReflect`
* The reflected must be fully populated for active fields (can't use an empty `DynamicStruct`)
However, one or both of these requirements might be unachievable, such as for external types. In these cases, it might be nice to tell `FromReflect` to use a custom default.
## Solution
Added the `#[reflect(default)]` derive helper attribute. This attribute can be applied to any field (ignored or not) and will allow a default value to be specified in place of the regular `from_reflect()` call.
It takes two forms: `#[reflect(default)]` and `#[reflect(default = "some_func")]`. The former specifies that `Default::default()` should be used while the latter specifies that `some_func()` should be used. This is pretty much [how serde does it](https://serde.rs/field-attrs.html#default).
### Example
```rust
#[derive(Reflect, FromReflect)]
struct MyStruct {
// Use `Default::default()`
#[reflect(default)]
foo: String,
// Use `get_bar_default()`
#[reflect(default = "get_bar_default")]
#[reflect(ignore)]
bar: usize,
}
fn get_bar_default() -> usize {
123
}
```
### Active Fields
As an added benefit, this also allows active fields to be completely missing from their dynamic object. This is because the attribute tells `FromReflect` how to handle missing active fields (it still tries to use `from_reflect` first so the `FromReflect` trait is still required).
```rust
let dyn_struct = DynamicStruct::default();
// We can do this without actually including the active fields since they have `#[reflect(default)]`
let my_struct = <MyStruct as FromReflect>::from_reflect(&dyn_struct);
```
### Container Defaults
Also, with the addition of #3733, people will likely start adding `#[reflect(Default)]` to their types now. Just like with the fields, we can use this to mark the entire container as "defaultable". This grants us the ability to completely remove the field markers altogether if our type implements `Default` (and we're okay with fields using that instead of their own `Default` impls):
```rust
#[derive(Reflect, FromReflect)]
#[reflect(Default)]
struct MyStruct {
foo: String,
#[reflect(ignore)]
bar: usize,
}
impl Default for MyStruct {
fn default() -> Self {
Self {
foo: String::from("Hello"),
bar: 123,
}
}
}
// Again, we can now construct this from nothing pretty much
let dyn_struct = DynamicStruct::default();
let my_struct = <MyStruct as FromReflect>::from_reflect(&dyn_struct);
```
Now if _any_ field is missing when using `FromReflect`, we simply fallback onto the container's `Default` implementation.
This behavior can be completely overridden on a per-field basis, of course, by simply defining those same field attributes like before.
### Related
* #3733
* #1395
* #2377
---
## Changelog
* Added `#[reflect(default)]` field attribute for `FromReflect`
* Allows missing fields to be given a default value when using `FromReflect`
* `#[reflect(default)]` - Use the field's `Default` implementation
* `#[reflect(default = "some_fn")]` - Use a custom function to get the default value
* Allow `#[reflect(Default)]` to have a secondary usage as a container attribute
* Allows missing fields to be given a default value based on the container's `Default` impl when using `FromReflect`
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
