# Objective
Resolve#10054.
## Solution
Make dynamic linking a no-op by omitting it from the dependency tree on
wasm targets.
To test this, try `cargo build --lib --target wasm32-unknown-unknown
--features bevy/dynamic_linking` with and without this PR.
Might need to update the book on the website to explain this when this
makes it into a release.
Co-Authored By: @daxpedda
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
- Clippy raises a few warnings on the latest nightly release. 📎
## Solution
- Use `ptr::from_ref` when possible, because it prevents you from
accidentally changing the mutability as well as its type.
- Use `ptr::addr_eq` when comparing two pointers, ignoring pointer
metadata.
# Objective
- animating a sprite in response to an event is a [common beginner
problem](https://www.reddit.com/r/bevy/comments/13xx4v7/sprite_animation_in_bevy/)
## Solution
- provide a simple example to show how to animate a sprite in response
to an event
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Both the shedule and winit runners use/reimplement `app_exit_manual`
even tough they can use `app_exit`
## Solution
Nuke `app_exit_manual` from orbit.
# Objective
- GitHub action running iOS CI has been updated to use arm runner
- This makes iOS test fail as it's not installing the correct rust
target
## Solution
- add the correct rust target, do not remove x86 targets for now as it
may be some time for a partial rollout
# Objective
Clarify the comment about the camera's coordinate system in
`examples/3d/generate_custom_mesh.rs` by explicitly stating which axes
point where.
Fixes#13018
## Solution
Copy the wording from #13012 into the example.
# Objective
- Be able to edit animation inside the editor and save them once
modified. This will allow bevy to modify animation assets with code.
- Fixes#13052
## Solution
- Expose the previously const getters of the Animation curves
---
# Objective
Follow up to #13062. As of async-executor 1.11, the crate reexports
FallibleTask, which is the only reason bevy_tasks has a direct
dependency on async-task. This should avoid the two dependencies getting
out of sync in the future and causing spurious compilation failures.
## Solution
Bump async-executor to 1.11, use the reexport, remove the dependency on
async-task.
# Objective
- bevy usually use `Parallel::scope` to collect items from `par_iter`,
but `scope` will be called with every satifified items. it will cause a
lot of unnecessary lookup.
## Solution
- similar to Rayon ,we introduce `for_each_init` for `par_iter` which
only be invoked when spawn a task for a group of items.
---
## Changelog
- added `for_each_init`
## Performance
`check_visibility ` in `many_foxes `
~40% performance gain in `check_visibility`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Allow `Gizmos` to work in `FixedUpdate` without any changes needed. This
changes `Gizmos` from being a purely immediate mode api, but allows the
user to use it as if it were an immediate mode API regardless of
schedule context.
Also allows for extending by other custom schedules by adding their own
`GizmoStorage<Clear>` and the requisite systems:
- `propagate_gizmos::<Clear>` before `update_gizmo_meshes`
- `stash_default_gizmos` when starting a clear context
- `pop_default_gizmos` when ending a clear context
- `collect_default_gizmos` when grabbing the requested gizmos
- `clear_gizmos` for clearing the context's gizmos
## Solution
Adds a generic to `Gizmos` that defaults to `Update` (the current way
gizmos works). When entering a new clear context the default `Gizmos`
gets swapped out for that context's duration so the context can collect
the gizmos requested.
Prior work: https://github.com/bevyengine/bevy/pull/9153
## To do
- [x] `FixedUpdate` should probably get its own First, Pre, Update,
Post, Last system sets for this. Otherwise users will need to make sure
to order their systems before `clear_gizmos`. This could alternatively
be fixed by moving the setup of this to `bevy_time::fixed`?
PR to fix this issue: https://github.com/bevyengine/bevy/pull/10977
- [x] use mem::take internally for the swaps?
- [x] Better name for the `Context` generic on gizmos? `Clear`?
---
## Changelog
- Gizmos drawn in `FixedMain` now last until the next `FixedMain`
iteration runs.
# Objective
- Some CI jobs specifically use `macos-14`, as compared to the default
`macos-latest`.
- `macos-latest` is equivalent to `macos-12`, but may be updated in the
future.
- The CI job that tests on the minimum supported Rust version (MSRV)
uses environmental variables to save the toolchain version.
- This specific usage is what step outputs were designed for.
- Both do the same thing, but step outputs can be checked by the [Github
Actions VSCode
Extension](https://marketplace.visualstudio.com/items?itemName=GitHub.vscode-github-actions).
- Some workflows have a `NIGHTLY_TOOLCHAIN` variable that let us pin the
nightly version, in case a new release breaks CI.
## Solution
- Document why certain actions required `macos-14`.
- Switch MSRV step to use step outputs.
- Add a small comment documenting the purpose of the `NIGHTLY_TOOLCHAIN`
environmental variable.
Bumps `async-task` to 4.7.0 , note this is what Cargo.lock has as well.
Building as a dependency gives the following:
```
Compiling async-channel v1.8.0
Compiling futures-lite v1.12.0
error[E0432]: unresolved import `async_task::Builder`
--> /Users/daniel/.cargo/registry/src/index.crates.io-6f17d22bba15001f/async-executor-1.8.0/src/lib.rs:46:18
|
46 | use async_task::{Builder, Runnable};
| ^^^^^^^ no `Builder` in the root
|
= help: consider importing this struct instead:
std:🧵:Builder
For more information about this error, try `rustc --explain E0432`.
error: could not compile `async-executor` (lib) due to 1 previous error
warning: build failed, waiting for other jobs to finish...
```
With this change, builds correctly
# Objective
Adds a few extra `#[doc(alias)]` entries to the
`bevy_math::primitives::WindingOrder` enum and its variants to improve
searchability.
## Solution
- Add "Orientation" for `WindingOrder` itself
- Add "AntiClockwise" for `CounterClockwise` variant
- Add "Collinear" for `Invalid` variant
These alternate terms seem to be quite common, especially in the
contexts of rendering and collision-detection.
Signed-off-by: Nullicorn <git@nullicorn.me>
# Objective
Fixes#12470
This adds a examples for `ButtonInput` with `KeyCode`, `MouseButton`,
and `GamepadButton`.
It also includes an example of checking a multi-key combination, and
checking multiple keys to mean roughly the same thing.
# Objective
Closes#13017.
## Solution
- Make `AppExit` a enum with a `Success` and `Error` variant.
- Make `App::run()` return a `AppExit` if it ever returns.
- Make app runners return a `AppExit` to signal if they encountered a
error.
---
## Changelog
### Added
- [`App::should_exit`](https://example.org/)
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
to the `bevy` and `bevy_app` preludes,
### Changed
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
is now a enum with 2 variants (`Success` and `Error`).
- The app's [runner
function](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.set_runner)
now has to return a `AppExit`.
-
[`App::run()`](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.run)
now also returns the `AppExit` produced by the runner function.
## Migration Guide
- Replace all usages of
[`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
with `AppExit::Success` or `AppExit::Failure`.
- Any custom app runners now need to return a `AppExit`. We suggest you
return a `AppExit::Error` if any `AppExit` raised was a Error. You can
use the new [`App::should_exit`](https://example.org/) method.
- If not exiting from `main` any other way. You should return the
`AppExit` from `App::run()` so the app correctly returns a error code if
anything fails e.g.
```rust
fn main() -> AppExit {
App::new()
//Your setup here...
.run()
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- https://github.com/rust-lang/rust/pull/123905 has been merged, so the
workaround introduced in #12913 is no longer necessary.
- Closes#12968
## Solution
- Remove unecessary `allow` attribute
- This is currently blocked until Rust beta updates.
- Last tested with `rustc 1.78.0-beta.7 (6fd191292 2024-04-12)`.
# Objective
Add support so bevy_ui can correctly handle an UI hierarchy without a
camera present.
- Fixes#12184
## Solution
As there was no default behavior for what should happen when a camera is
not present in a UI hierarchy, the solution
was based in defining that default behavior and improving the overall
handling of this "exception".
## Changelog
- Create default values to be used in upsert_node
- Add flag to control warnings about no camera present
- Create unit test no_camera_ui (to test if ui handles no camera
present)
# Objective
Allow parallel iteration over events, resolve#10766
## Solution
- Add `EventParIter` which works similarly to `QueryParIter`,
implementing a `for_each{_with_id}` operator.
I chose to not mirror `EventIteratorWithId` and instead implement both
operations on a single struct.
- Reuse `BatchingStrategy` from `QueryParIter`
## Changelog
- `EventReader` now supports parallel event iteration using
`par_read().for_each(|event| ...)`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.20.8 to
1.20.9.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.20.9</h2>
<h2>[1.20.9] - 2024-04-16</h2>
<h3>Fixes</h3>
<ul>
<li>Don't correct the unit <code>dBA</code> (as an identifier to limit
to that case)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.20.9] - 2024-04-16</h2>
<h3>Fixes</h3>
<ul>
<li>Don't correct the unit <code>dBA</code> (as an identifier to limit
to that case)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="44548ad17a"><code>44548ad</code></a>
chore: Release</li>
<li><a
href="73fb2cad75"><code>73fb2ca</code></a>
docs: Update changelog</li>
<li><a
href="21838b0e7d"><code>21838b0</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1000">#1000</a>
from epage/dba</li>
<li><a
href="ee32d77aba"><code>ee32d77</code></a>
fix(dict): Don't correct dBA</li>
<li><a
href="56df0bd8d6"><code>56df0bd</code></a>
test(dict): Show dBA behavior</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.20.8...v1.20.9">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Makes crate module docs render correctly in the docs for the monolithic
library. Fixes https://github.com/bevyengine/bevy/issues/13055.
## Solution
Swap from
```rust
pub mod foo {
pub use bevy_foo::*;
}
```
to
```rust
pub use bevy_foo as foo;
```
Adjusted the documentation to better describe the performance cost of
`ButtonInput::any_just_pressed|any_just_released|any_pressed`.
Each function iterates the full input, but each check is expected
constant cost. It was described previously as a full input check, and a
full internal list iteration, which I believe is incorrect.
# Objective
- `MeshPipelineKey` use some bits for two things
- First commit in this PR adds an assertion that doesn't work currently
on main
- This leads to some mesh topology not working anymore, for example
`LineStrip`
- With examples `lines`, there should be two groups of lines, the blue
one doesn't display currently
## Solution
- Change the `MeshPipelineKey` to be backed by a `u64` instead, to have
enough bits
# Objective
Fix#2128. Both `Query::new_archetype` and `SystemParam::new_archetype`
do not check if the `Archetype` comes from the same World the state is
initialized from. This could result in unsoundness via invalid accesses
if called incorrectly.
## Solution
Make them `unsafe` functions and lift the invariant to the caller. This
also caught one instance of us not validating the World in
`SystemState::update_archetypes_unsafe_world_cell`'s implementation.
---
## Changelog
Changed: `QueryState::new_archetype` is now an unsafe function.
Changed: `SystemParam::new_archetype` is now an unsafe function.
## Migration Guide
`QueryState::new_archetype` and `SystemParam::new_archetype` are now an
unsafe functions that must be sure that the provided `Archetype` is from
the same `World` that the state was initialized from. Callers may need
to add additional assertions or propagate the safety invariant upwards
through the callstack to ensure safety.
# Objective
- The docs says the WireframeColor is supposed to override the default
global color but it doesn't.
## Solution
- Use WireframeColor to override global color like docs said it was
supposed to do.
- Updated the example to document this feature
- I also took the opportunity to clean up the code a bit
Fixes#13032
# Objective
- Fixes#13024.
## Solution
- Run `cargo clippy --target wasm32-unknown-unknown` until there are no
more errors.
- I recommend reviewing one commit at a time :)
---
## Changelog
- Fixed Clippy lints for `wasm32-unknown-unknown` target.
- Updated `bevy_transform`'s `README.md`.
# Objective
Fixes#12900
## Solution
Added comment to example indicating that additional audio formats are
supported when the feature is added.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Closes#12930.
## Solution
- Add a corresponding optional field on `Window` and `ExtractedWindow`
---
## Changelog
### Added
- `wgpu`'s `desired_maximum_frame_latency` is exposed through window
creation. This can be used to override the default maximum number of
queued frames on the GPU (currently 2).
## Migration Guide
- The `desired_maximum_frame_latency` field must be added to instances
of `Window` and `ExtractedWindow` where all fields are explicitly
specified.
# Objective
- Many of our CI workflows contain a `NIGHTLY_TOOLCHAIN` environmental
variable.
- This specifies which nightly to use. If there is a bug in one of the
nightlies, we can pin the toolchain to be an earlier version.
- Both the daily and weekly workflows do not use the nightly compiler,
but still have a `NIGHTLY_TOOLCHAIN` variable.
## Solution
- Delete the unused variable.
# Objective
Sometimes when despawning a ui node in the PostUpdate schedule it
panics. This is because both a despawn command and insert command are
being run on the same entity.
See this example code:
```rs
use bevy::{prelude::*, ui::UiSystem};
#[derive(Resource)]
struct SliceSquare(Handle<Image>);
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Startup, setup)
.add_systems(Update, create_ui)
.add_systems(PostUpdate, despawn_nine_slice.after(UiSystem::Layout))
.run();
}
fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
commands.spawn(Camera2dBundle::default());
commands.insert_resource(SliceSquare(asset_server.load("textures/slice_square.png")));
}
fn create_ui(mut commands: Commands, slice_square: Res<SliceSquare>) {
commands.spawn((
NodeBundle {
style: Style {
width: Val::Px(200.),
height: Val::Px(200.),
..default()
},
background_color: Color::WHITE.into(),
..default()
},
UiImage::new(slice_square.0.clone()),
ImageScaleMode::Sliced(TextureSlicer {
border: BorderRect::square(220.),
center_scale_mode: SliceScaleMode::Stretch,
sides_scale_mode: SliceScaleMode::Stretch,
max_corner_scale: 1.,
}),
));
}
fn despawn_nine_slice(mut commands: Commands, mut slices: Query<Entity, With<ImageScaleMode>>) {
for entity in slices.iter_mut() {
commands.entity(entity).despawn_recursive();
}
}
```
This code spawns a UiNode with a sliced image scale mode, and despawns
it in the same frame. The
bevy_ui::texture_slice::compute_slices_on_image_change system tries to
insert the ComputedTextureSlices component on that node, but that entity
is already despawned causing this error:
```md
error[B0003]: Could not insert a bundle (of type `bevy_ui::texture_slice::ComputedTextureSlices`) for entity Entity { index: 2, generation: 3 } because it doesn't
exist in this World. See: https://bevyengine.org/learn/errors/#b0003
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Encountered a panic when applying buffers for system `bevy_ui::texture_slice::compute_slices_on_image_change`!
Encountered a panic in system `bevy_ecs::schedule::executor::apply_deferred`!
Encountered a panic in system `bevy_app::main_schedule::Main::run_main`!
```
Note that you might have to run the code a few times before this error
appears.
## Solution
Use try_insert instead of insert for non critical inserts in the bevy_ui
crate.
## Some notes
In a lot of cases it does not makes much sense to despawn ui nodes after
the layout system has finished. Except maybe if you delete the root ui
node of a tree. I personally encountered this issue in bevy `0.13.2`
with a system that was running before the layout system. And in `0.13.2`
the `compute_slices_on_image_change` system was also running before the
layout system. But now it runs after the layout system. So the only way
that this bug appears now is if you despawn ui nodes after the layout
system. So I am not 100% sure if using try_insert in this system is the
best option. But personally I still think it is better then the program
panicking.
However the `update_children_target_camera` system does still run before
the layout system. So I do think it might still be able to panic when ui
nodes are despawned before the layout system. Though I haven't been able
to verify that.
# Objective
- General clenup of the primitives in `bevy_math`
- Add `eccentricity()` to `Ellipse`
## Solution
- Moved `Bounded3d` implementation for `Triangle3d` to the `bounded`
module
- Added `eccentricity()` to `Ellipse`
- `Ellipse::semi_major()` and `::semi_minor()` now accept `&self`
instead of `self`
- `Triangle3d::is_degenerate()` actually uses `f32::EPSILON` as
documented
- Added tests for `Triangle3d`-maths
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: Miles Silberling-Cook <nth.tensor@gmail.com>
# Objective
Make visibility system ordering explicit. Fixes#12953.
## Solution
Specify `CheckVisibility` happens after all other `VisibilitySystems`
sets have happened.
---------
Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com>
# Objective
Missing docs
## Solution
Add docs paraphrased from the Cart's mouth:
https://discord.com/channels/691052431525675048/691052431974465548/1172305792154738759
> It follows the natural "results" of right handed y-up. The default
camera will face "forward" in -Z, with +X being "right". The RH y-up
setup is reasonably common. Thats why I asked for existing examples.I
think we should appeal to the masses here / see how other RH Y-up 3D
packages / engines handle this
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
When trying to be generic over `Material + Default`, the lack of a
`Default` impl for `ExtendedMaterial`, even when both of its components
implement `Default`, is problematic. I think was probably just
overlooked.
## Solution
Impl `Default` if the material and extension both impl `Default`.
---
## Changelog
## Migration Guide
# Objective
Related to #12981
Presently, there is a footgun where we allow non-normalized vectors to
be passed in the `axis` parameters of `Transform::rotate_axis` and
`Transform::rotate_local_axis`. These methods invoke
`Quat::from_axis_angle` which expects the vector to be normalized. This
PR aims to address this.
## Solution
Require `Dir3`-valued `axis` parameters for these functions so that the
vector's normalization can be enforced at type-level.
---
## Migration Guide
All calls to `Transform::rotate_axis` and `Transform::rotate_local_axis`
will need to be updated to use a `Dir3` for the `axis` parameter rather
than a `Vec3`. For a general input, this means calling `Dir3::new` and
handling the `Result`, but if the previous vector is already known to be
normalized, `Dir3::new_unchecked` can be called instead. Note that
literals like `Vec3::X` also have corresponding `Dir3` literals; e.g.
`Dir3::X`, `Dir3::NEG_Y` and so on.
---
## Discussion
This axis input is unambigiously a direction instead of a vector, and
that should probably be reflected and enforced by the function
signature. In previous cases where we used, e.g., `impl TryInto<Dir3>`,
the associated methods already implemented (and required!) additional
fall-back logic, since the input is conceptually more complicated than
merely specifying an axis. In this case, I think it's fairly
cut-and-dry, and I'm pretty sure these methods just predate our
direction types.
# Objective
As described in #12467, Bevy does not have any spans for any of the
tasks scheduled onto the IO and async compute task pools.
## Solution
Instrument all asset loads and asset processing. Since this change is
restricted to asset tasks, it does not completely solve #12467, but it
does mean we can record the asset path in the trace.
---
## Changelog
Tracing will now include spans for asset loading and asset processing.
# Objective
When learning about creating meshes in bevy using this example I
couldn't tell which coordinate system bevy uses, which caused confusion
and having to look it up else where.
## Solution
Add a comment that says what coordinate system bevy uses.
glTF files that contain lights currently panic when loaded into Bevy,
because Bevy tries to reflect on `Cascades`, which accidentally wasn't
registered.
`EntityHashSet` doesn't seem to implement `Reflect` which seems weird!
Especially since `EntityHashMap` implements `Reflect`.
This PR just added an extra `impl_reflect_value!` for `EntityHashSet`
and this seems to do the trick.
I left out doing the same for `StableHashSet` since it's marked as
deprecated.
---
I'm really wondering what was the issue here. If anyone can explain why
`EntityHashSet` can't use the `Reflect` impl of `bevy_utils::HashSet`
similar to how it's the case with the `...HashMap`s I'd be interested!
