# Objective
The type `Local<T>` unnecessarily has the bound `T: Sync` when the local is used in an exclusive system.
## Solution
Lift the bound.
---
## Changelog
Removed the bound `T: Sync` from `Local<T>` when used as an `ExclusiveSystemParam`.
# Objective
Fixes#3310. Fixes#6282. Fixes#6278. Fixes#3666.
## Solution
Split out `!Send` resources into `NonSendResources`. Add a `origin_thread_id` to all `!Send` Resources, check it on dropping `NonSendResourceData`, if there's a mismatch, panic. Moved all of the checks that `MainThreadValidator` would do into `NonSendResources` instead.
All `!Send` resources now individually track which thread they were inserted from. This is validated against for every access, mutation, and drop that could be done against the value.
A regression test using an altered version of the example from #3310 has been added.
This is a stopgap solution for the current status quo. A full solution may involve fully removing `!Send` resources/components from `World`, which will likely require a much more thorough design on how to handle the existing in-engine and ecosystem use cases.
This PR also introduces another breaking change:
```rust
use bevy_ecs::prelude::*;
#[derive(Resource)]
struct Resource(u32);
fn main() {
let mut world = World::new();
world.insert_resource(Resource(1));
world.insert_non_send_resource(Resource(2));
let res = world.get_resource_mut::<Resource>().unwrap();
assert_eq!(res.0, 2);
}
```
This code will run correctly on 0.9.1 but not with this PR, since NonSend resources and normal resources have become actual distinct concepts storage wise.
## Changelog
Changed: Fix soundness bug with `World: Send`. Dropping a `World` that contains a `!Send` resource on the wrong thread will now panic.
## Migration Guide
Normal resources and `NonSend` resources no longer share the same backing storage. If `R: Resource`, then `NonSend<R>` and `Res<R>` will return different instances from each other. If you are using both `Res<T>` and `NonSend<T>` (or their mutable variants), to fetch the same resources, it's strongly advised to use `Res<T>`.
# Objective
- This pulls out some of the changes to Plugin setup and sub apps from #6503 to make that PR easier to review.
- Separate the extract stage from running the sub app's schedule to allow for them to be run on separate threads in the future
- Fixes#6990
## Solution
- add a run method to `SubApp` that runs the schedule
- change the name of `sub_app_runner` to extract to make it clear that this function is only for extracting data between the main app and the sub app
- remove the extract stage from the sub app schedule so it can be run separately. This is done by adding a `setup` method to the `Plugin` trait that runs after all plugin build methods run. This is required to allow the extract stage to be removed from the schedule after all the plugins have added their systems to the stage. We will also need the setup method for pipelined rendering to setup the render thread. See e3267965e1/crates/bevy_render/src/pipelined_rendering.rs (L57-L98)
## Changelog
- Separate SubApp Extract stage from running the sub app schedule.
## Migration Guide
### SubApp `runner` has conceptually been changed to an `extract` function.
The `runner` no longer is in charge of running the sub app schedule. It's only concern is now moving data between the main world and the sub app. The `sub_app.app.schedule` is now run for you after the provided function is called.
```rust
// before
fn main() {
let sub_app = App::empty();
sub_app.add_stage(MyStage, SystemStage::parallel());
App::new().add_sub_app(MySubApp, sub_app, move |main_world, sub_app| {
extract(app_world, render_app);
render_app.app.schedule.run();
});
}
// after
fn main() {
let sub_app = App::empty();
sub_app.add_stage(MyStage, SystemStage::parallel());
App::new().add_sub_app(MySubApp, sub_app, move |main_world, sub_app| {
extract(app_world, render_app);
// schedule is automatically called for you after extract is run
});
}
```
Spiritual successor to #5205.
Actual successor to #6865.
# Objective
Currently, system params are defined using three traits: `SystemParam`, `ReadOnlySystemParam`, `SystemParamState`. The behavior for each param is specified by the `SystemParamState` trait, while `SystemParam` simply defers to the state.
Splitting the traits in this way makes it easier to implement within macros, but it increases the cognitive load. Worst of all, this approach requires each `MySystemParam` to have a public `MySystemParamState` type associated with it.
## Solution
* Merge the trait `SystemParamState` into `SystemParam`.
* Remove all trivial `SystemParam` state types.
* `OptionNonSendMutState<T>`: you will not be missed.
---
- [x] Fix/resolve the remaining test failure.
## Changelog
* Removed the trait `SystemParamState`, merging its functionality into `SystemParam`.
## Migration Guide
**Note**: this should replace the migration guide for #6865.
This is relative to Bevy 0.9, not main.
The traits `SystemParamState` and `SystemParamFetch` have been removed, and their functionality has been transferred to `SystemParam`.
```rust
// Before (0.9)
impl SystemParam for MyParam<'_, '_> {
type State = MyParamState;
}
unsafe impl SystemParamState for MyParamState {
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
}
unsafe impl<'w, 's> SystemParamFetch<'w, 's> for MyParamState {
type Item = MyParam<'w, 's>;
fn get_param(&mut self, ...) -> Self::Item;
}
unsafe impl ReadOnlySystemParamFetch for MyParamState { }
// After (0.10)
unsafe impl SystemParam for MyParam<'_, '_> {
type State = MyParamState;
type Item<'w, 's> = MyParam<'w, 's>;
fn init_state(world: &mut World, system_meta: &mut SystemMeta) -> Self::State { ... }
fn get_param<'w, 's>(state: &mut Self::State, ...) -> Self::Item<'w, 's>;
}
unsafe impl ReadOnlySystemParam for MyParam<'_, '_> { }
```
The trait `ReadOnlySystemParamFetch` has been replaced with `ReadOnlySystemParam`.
```rust
// Before
unsafe impl ReadOnlySystemParamFetch for MyParamState {}
// After
unsafe impl ReadOnlySystemParam for MyParam<'_, '_> {}
```
# Objective
- The doctest for `Mut::map_unchanged` uses a fake function `set_if_not_equal` to demonstrate usage.
- Now that #6853 has been merged, we can use `Mut::set_if_neq` directly instead of mocking it.
# Objective
`SystemParam` `Local`s documentation currently leaves out information that should be documented.
- What happens when multiple `SystemParam`s within the same system have the same `Local` type.
- What lifetime parameter is expected by `Local`.
## Solution
- Added sentences to documentation to communicate this information.
- Renamed `Local` lifetimes in code to `'s` where they previously were not. Users can get complicated incorrect suggested fixes if they pass the wrong lifetime. Some instance of the code had `'w` indicating the expected lifetime might not have been known to those that wrote the code either.
Co-authored-by: iiYese <83026177+iiYese@users.noreply.github.com>
# Objective
- Fix#4200
Currently, `#[derive(SystemParam)]` publicly exposes each field type, which makes it impossible to encapsulate private fields.
## Solution
Previously, the fields were leaked because they were used as an input generic type to the macro-generated `SystemParam::State` struct. That type has been changed to store its state in a field with a specific type, instead of a generic type.
---
## Changelog
- Fixed a bug that caused `#[derive(SystemParam)]` to leak the types of private fields.
# Objective
`Query::get` and other random access methods require looking up `EntityLocation` for every provided entity, then always looking up the `Archetype` to get the table ID and table row. This requires 4 total random fetches from memory: the `Entities` lookup, the `Archetype` lookup, the table row lookup, and the final fetch from table/sparse sets. If `EntityLocation` contains the table ID and table row, only the `Entities` lookup and the final storage fetch are required.
## Solution
Add `TableId` and table row to `EntityLocation`. Ensure it's updated whenever entities are moved around. To ensure `EntityMeta` does not grow bigger, both `TableId` and `ArchetypeId` have been shrunk to u32, and the archetype index and table row are stored as u32s instead of as usizes. This should shrink `EntityMeta` by 4 bytes, from 24 to 20 bytes, as there is no padding anymore due to the change in alignment.
This idea was partially concocted by @BoxyUwU.
## Performance
This should restore the `Query::get` "gains" lost to #6625 that were introduced in #4800 without being unsound, and also incorporates some of the memory usage reductions seen in #3678.
This also removes the same lookups during add/remove/spawn commands, so there may be a bit of a speedup in commands and `Entity{Ref,Mut}`.
---
## Changelog
Added: `EntityLocation::table_id`
Added: `EntityLocation::table_row`.
Changed: `World`s can now only hold a maximum of 2<sup>32</sup>- 1 archetypes.
Changed: `World`s can now only hold a maximum of 2<sup>32</sup> - 1 tables.
## Migration Guide
A `World` can only hold a maximum of 2<sup>32</sup> - 1 archetypes and tables now. If your use case requires more than this, please file an issue explaining your use case.
# Objective
Bevy uses custom `Ptr` types so the rust borrow checker can help ensure lifetimes are correct, even when types aren't known. However, these types don't benefit from the automatic lifetime coercion regular rust references enjoy
## Solution
Add a couple methods to Ptr, PtrMut, and MutUntyped to allow for easy usage of these types in more complex scenarios.
## Changelog
- Added `as_mut` and `as_ref` methods to `MutUntyped`.
- Added `shrink` and `as_ref` methods to `PtrMut`.
## Migration Guide
- `MutUntyped::into_inner` now marks things as changed.
# Objective
Resolve#6156.
The most common type of command is one that runs for a single entity. Built-in commands like this can be ergonomically added to the command queue using the `EntityCommands` struct. However, adding custom entity commands to the queue is quite cumbersome. You must first spawn an entity, store its ID in a local, then construct a command using that ID and add it to the queue. This prevents method chaining, which is the main benefit of using `EntityCommands`.
### Example (before)
```rust
struct MyCustomCommand(Entity);
impl Command for MyCustomCommand { ... }
let id = commands.spawn((...)).id();
commmands.add(MyCustomCommand(id));
```
## Solution
Add the `EntityCommand` trait, which allows directly adding per-entity commands to the `EntityCommands` struct.
### Example (after)
```rust
struct MyCustomCommand;
impl EntityCommand for MyCustomCommand { ... }
commands.spawn((...)).add(MyCustomCommand);
```
---
## Changelog
- Added the trait `EntityCommand`. This is a counterpart of `Command` for types that execute code for a single entity.
## Future Work
If we feel its necessary, we can simplify built-in commands (such as `Despawn`) to use this trait.
# Objective
Any closure with the signature `FnOnce(&mut World)` implicitly implements the trait `Command` due to a blanket implementation. However, this implementation unnecessarily has the `Sync` bound, which limits the types that can be used.
## Solution
Remove the bound.
---
## Changelog
- `Command` closures no longer need to implement the marker trait `std::marker::Sync`.
# Objective
- Be able to name the type that `ManualEventReader::iter/iter_with_id` returns and `EventReader::iter/iter_with_id` by proxy.
Currently for the purpose of https://github.com/bevyengine/bevy/pull/5719
## Solution
- Create a custom `Iterator` type.
# Objective
* Currently, the `SystemParam` derive does not support types with const generic parameters.
* If you try to use const generics, the error message is cryptic and unhelpful.
* Continuation of the work started in #6867 and #6957.
## Solution
Allow const generic parameters to be used with `#[derive(SystemParam)]`.
# Objective
Fixes#4729.
Continuation of #4854.
## Solution
Add documentation to `ParamSet` and its methods. Includes examples suggested by community members in the original PR.
Co-authored-by: Nanox19435 <50684926+Nanox19435@users.noreply.github.com>
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
# Objective
* The `SystemParam` derive internally uses tuples, which means it is constrained by the 16-field limit on `all_tuples`.
* The error message if you exceed this limit is abysmal.
* Supercedes #5965 -- this does the same thing, but is simpler.
## Solution
If any tuples have more than 16 fields, they are folded into tuples of tuples until they are under the 16-field limit.
# Objective
Currently, only named structs can be used with the `SystemParam` derive macro.
## Solution
Remove the restriction. Tuple structs and unit structs are now supported.
---
## Changelog
+ Added support for tuple structs and unit structs to the `SystemParam` derive macro.
# Objective
There is currently no way to iterate over key/value pairs inside an `EntityMap`, which makes the usage of this struct very awkward. I couldn't think of a good reason why the `iter()` function should not be exposed, considering the interface already exposes `keys()` and `values()`, so I made this PR.
## Solution
Implement `iter()` for `EntityMap` in terms of its inner map type.
# Objective
[Rust 1.66](https://blog.rust-lang.org/inside-rust/2022/12/12/1.66.0-prerelease.html) is coming in a few days, and bevy doesn't build with it.
Fix that.
## Solution
Replace output from a trybuild test, and fix a few new instances of `needless_borrow` and `unnecessary_cast` that are now caught.
## Note
Due to the trybuild test, this can't be merged until 1.66 is released.
# Objective
A separate `tracing` span for running a system's commands is created, even if the system doesn't have commands. This is adding extra measuring overhead (see #4892) where it's not needed.
## Solution
Move the span into `ParallelCommandState` and `CommandQueue`'s `SystemParamState::apply`. To get the right metadata for the span, a additional `&SystemMeta` parameter was added to `SystemParamState::apply`.
---
## Changelog
Added: `SystemMeta::name`
Changed: Systems without `Commands` and `ParallelCommands` will no longer show a "system_commands" span when profiling.
Changed: `SystemParamState::apply` now takes a `&SystemMeta` parameter in addition to the provided `&mut World`.
# Objective
Change detection can be spuriously triggered by setting a field to the same value as before. As a result, a common pattern is to write:
```rust
if *foo != value {
*foo = value;
}
```
This is confusing to read, and heavy on boilerplate.
Adopted from #5373, but untangled and rebased to current `bevy/main`.
## Solution
1. Add a method to the `DetectChanges` trait that implements this boilerplate when the appropriate trait bounds are met.
2. Document this minor footgun, and point users to it.
## Changelog
* added the `set_if_neq` method to avoid triggering change detection when the new and previous values are equal. This will work on both components and resources.
## Migration Guide
If you are manually checking if a component or resource's value is equal to its new value before setting it to avoid triggering change detection, migrate to the clearer and more convenient `set_if_neq` method.
## Context
Related to #2363 as it avoids triggering change detection, but not a complete solution (as it still requires triggering it when real changes are made).
Co-authored-by: Zoey <Dessix@Dessix.net>
# Objective
Speed up bundle insertion and spawning from a bundle.
## Solution
Use the same technique used in #6800 to remove the branch on storage type when writing components from a `Bundle` into storage.
- Add a `StorageType` argument to the closure on `Bundle::get_components`.
- Pass `C::Storage::STORAGE_TYPE` into that argument.
- Match on that argument instead of reading from a `Vec<StorageType>` in `BundleInfo`.
- Marked all implementations of `Bundle::get_components` as inline to encourage dead code elimination.
The `Vec<StorageType>` in `BundleInfo` was also removed as it's no longer needed. If users were reliant on this, they can either use the compile time constants or fetch the information from `Components`. Should save a rather negligible amount of memory.
## Performance
Microbenchmarks show a slight improvement to inserting components into existing entities, as well as spawning from a bundle. Ranging about 8-16% faster depending on the benchmark.
```
group main soft-constant-write-components
----- ---- ------------------------------
add_remove/sparse_set 1.08 1019.0±80.10µs ? ?/sec 1.00 944.6±66.86µs ? ?/sec
add_remove/table 1.07 1343.3±20.37µs ? ?/sec 1.00 1257.3±18.13µs ? ?/sec
add_remove_big/sparse_set 1.08 1132.4±263.10µs ? ?/sec 1.00 1050.8±240.74µs ? ?/sec
add_remove_big/table 1.02 2.6±0.05ms ? ?/sec 1.00 2.5±0.08ms ? ?/sec
get_or_spawn/batched 1.15 401.4±17.76µs ? ?/sec 1.00 349.3±11.26µs ? ?/sec
get_or_spawn/individual 1.13 732.1±43.35µs ? ?/sec 1.00 645.6±41.44µs ? ?/sec
insert_commands/insert 1.12 623.9±37.48µs ? ?/sec 1.00 557.4±34.99µs ? ?/sec
insert_commands/insert_batch 1.16 401.4±17.00µs ? ?/sec 1.00 347.4±12.87µs ? ?/sec
insert_simple/base 1.08 416.9±5.60µs ? ?/sec 1.00 385.2±4.14µs ? ?/sec
insert_simple/unbatched 1.06 934.5±44.58µs ? ?/sec 1.00 881.3±47.86µs ? ?/sec
spawn_commands/2000_entities 1.09 190.7±11.41µs ? ?/sec 1.00 174.7±9.15µs ? ?/sec
spawn_commands/4000_entities 1.10 386.5±25.33µs ? ?/sec 1.00 352.3±18.81µs ? ?/sec
spawn_commands/6000_entities 1.10 586.2±34.42µs ? ?/sec 1.00 535.3±27.25µs ? ?/sec
spawn_commands/8000_entities 1.08 778.5±45.15µs ? ?/sec 1.00 718.0±33.66µs ? ?/sec
spawn_world/10000_entities 1.04 1026.4±195.46µs ? ?/sec 1.00 985.8±253.37µs ? ?/sec
spawn_world/1000_entities 1.06 103.8±20.23µs ? ?/sec 1.00 97.6±18.22µs ? ?/sec
spawn_world/100_entities 1.15 11.4±4.25µs ? ?/sec 1.00 9.9±1.87µs ? ?/sec
spawn_world/10_entities 1.05 1030.8±229.78ns ? ?/sec 1.00 986.2±231.12ns ? ?/sec
spawn_world/1_entities 1.01 105.1±23.33ns ? ?/sec 1.00 104.6±31.84ns ? ?/sec
```
---
## Changelog
Changed: `Bundle::get_components` now takes a `FnMut(StorageType, OwningPtr)`. The provided storage type must be correct for the component being fetched.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/6417
## Solution
- clear_trackers was not being called on the render world. This causes the removed components vecs to continuously grow. This PR adds clear trackers to the end of RenderStage::Cleanup
## Migration Guide
The call to `clear_trackers` in `App` has been moved from the schedule to App::update for the main world and calls to `clear_trackers` have been added for sub_apps in the same function. This was due to needing stronger guarantees. If clear_trackers isn't called on a world it can lead to memory leaks in `RemovedComponents`.
# Objective
* Implementing a custom `SystemParam` by hand requires implementing three traits -- four if it is read-only.
* The trait `SystemParamFetch<'w, 's>` is a workaround from before we had generic associated types, and is no longer necessary.
## Solution
* Combine the trait `SystemParamFetch` with `SystemParamState`.
* I decided to remove the `Fetch` name and keep the `State` name, since the former was consistently conflated with the latter.
* Replace the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`, which simplifies trait bounds in generic code.
---
## Changelog
- Removed the trait `SystemParamFetch`, moving its functionality to `SystemParamState`.
- Replaced the trait `ReadOnlySystemParamFetch` with `ReadOnlySystemParam`.
## Migration Guide
The trait `SystemParamFetch` has been removed, and its functionality has been transferred to `SystemParamState`.
```rust
// Before
impl SystemParamState for MyParamState {
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
}
impl<'w, 's> SystemParamFetch<'w, 's> for MyParamState {
type Item = MyParam<'w, 's>;
fn get_param(...) -> Self::Item;
}
// After
impl SystemParamState for MyParamState {
type Item<'w, 's> = MyParam<'w, 's>; // Generic associated types!
fn init(world: &mut World, system_meta: &mut SystemMeta) -> Self { ... }
fn get_param<'w, 's>(...) -> Self::Item<'w, 's>;
}
```
The trait `ReadOnlySystemParamFetch` has been replaced with `ReadOnlySystemParam`.
```rust
// Before
unsafe impl ReadOnlySystemParamFetch for MyParamState {}
// After
unsafe impl<'w, 's> ReadOnlySystemParam for MyParam<'w, 's> {}
```
# Objective
It's not clear to users how to handle `!Sync` types as components and resources in the absence of engine level support for them.
## Solution
Added a section to `Component`'s and `Resource`'s type level docs on available options for making a type `Sync` when it holds `!Sync` fields, linking `bevy_utils::synccell::SyncCell` and the currently unstable `std::sync::Exclusive`.
Also added a compile_fail doctest that illustrates how to apply `SyncCell`. These will break when/if #6572 gets merged, at which point these docs should be updated.
# Objective
Fixes#6224, add ``dbg``, ``info``, ``warn`` and ``error`` system piping adapter variants to expand #5776, which call the corresponding re-exported [bevy_log macros](https://docs.rs/bevy/latest/bevy/log/macro.info.html) when the result is an error.
## Solution
* Added ``dbg``, ``info``, ``warn`` and ``error`` system piping adapter variants to ``system_piping.rs``.
* Modified and added tests for these under examples in ``system_piping.rs``.
# Objective
#6547 accidentally broke change detection for SparseSet components by using `Ticks::from_tick_cells` with the wrong argument order.
## Solution
Use the right argument order. Add a regression test.
having `doc(hidden)` on the read only version of a generated mutable world query leads to docs on the readonly item having a dead link. It also makes it annoying to have nice docs for libraries attempting to expose derived `WorldQuery` structs as re-exporting the read only item does not cause it to appear in docs even though it would be intended for users to know about the read only world query and use it.
# Objective
Prevent future unsoundness that was seen in #6623.
## Solution
Newtype both indexes in `Archetype` and `Table` as `ArchetypeRow` and `TableRow`. This avoids weird numerical manipulation on the indices, and can be stored and treated opaquely. Also enforces the source and destination of where these indices at a type level.
---
## Changelog
Changed: `Archetype` indices and `Table` rows have been newtyped as `ArchetypeRow` and `TableRow`.
# Objective
`EntityRef::get` and friends all type erase calls to fetch the target components by using passing in the `TypeId` instead of using generics. This is forcing a lookup to `Components` to fetch the storage type. This adds an extra memory lookup and forces a runtime branch instead of allowing the compiler to optimize out the unused branch.
## Solution
Leverage `Component::Storage::STORAGE_TYPE` as a constant instead of fetching the metadata from `Components`.
## Performance
This has a near 2x speedup for all calls to `World::get`. Microbenchmark results from my local machine. `Query::get_component`, which uses `EntityRef::get` internally also show a slight speed up. This has closed the gap between `World::get` and `Query::get` for the same use case.
```
group entity-ref-generics main
----- ------------------- ----
query_get_component/50000_entities_sparse 1.00 890.6±40.42µs ? ?/sec 1.10 980.6±28.22µs ? ?/sec
query_get_component/50000_entities_table 1.00 968.5±73.73µs ? ?/sec 1.08 1048.8±31.76µs ? ?/sec
query_get_component_simple/system 1.00 703.2±4.37µs ? ?/sec 1.00 702.1±6.13µs ? ?/sec
query_get_component_simple/unchecked 1.02 855.8±8.98µs ? ?/sec 1.00 843.1±8.19µs ? ?/sec
world_get/50000_entities_sparse 1.00 202.3±3.15µs ? ?/sec 1.85 374.0±20.96µs ? ?/sec
world_get/50000_entities_table 1.00 193.0±1.78µs ? ?/sec 2.02 389.2±26.55µs ? ?/sec
world_query_get/50000_entities_sparse 1.01 162.4±2.23µs ? ?/sec 1.00 161.3±0.95µs ? ?/sec
world_query_get/50000_entities_table 1.00 199.9±0.63µs ? ?/sec 1.00 200.2±0.74µs ? ?/sec
```
This should also, by proxy, speed up the `ReflectComponent` APIs as most of those use `World::get` variants internally.
# Objective
The methods `World::change_tick` and `World::read_change_tick` lack documentation and have confusingly similar behavior.
## Solution
Add documentation and clarify the distinction between the two functions.
The PR fixes the interface of `EventReader::clear`. Currently, the method consumes the reader, which makes it unusable.
## Changelog
- `EventReader::clear` now takes a mutable reference instead of consuming the event reader.
## Migration Guide
`EventReader::clear` now takes a mutable reference instead of consuming the event reader. This means that `clear` now needs explicit mutable access to the reader variable, which previously could have been omitted in some cases:
```rust
// Old (0.9)
fn clear_events(reader: EventReader<SomeEvent>) {
reader.clear();
}
// New (0.10)
fn clear_events(mut reader: EventReader<SomeEvent>) {
reader.clear();
}
```
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Fixes#6812.
## Solution
- Replaced `World::read_change_ticks` with `World::change_ticks` within `bevy_ecs` crate in places where `World` references were mutable.
---
# Objective
Partially addresses #5504. Allow users to get an `Iterator<Item = EntityRef<'a>>` over all entities in the `World`.
## Solution
Change `World::iter_entities` to return an iterator of `EntityRef` instead of `Entity`.
Not sure how to tackle making an `Iterator<Item = EntityMut<'_>>` without being horribly unsound. Might need to wait for `LendingIterator` to stabilize so we can ensure only one of them is valid at a given time.
---
## Changelog
Changed: `World::iter_entities` now returns an iterator of `EntityRef` instead of `Entity`.
# Objective
Currently, the `SystemParam` derive forces you to declare the lifetime parameters `<'w, 's>`, even if you don't use them.
If you don't follow this structure, the error message is quite nasty.
### Example (before):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, 's, E: Event> {
events: ResMut<'w, Events<E>>,
// The derive forces us to declare the `'s` lifetime even though we don't use it,
// so we have to add this `PhantomData` to please rustc.
#[system_param(ignore)]
_marker: PhantomData<&'s ()>,
}
```
## Solution
* Allow the user to omit either lifetime.
* Emit a descriptive error if any lifetimes used are invalid.
### Example (after):
```rust
#[derive(SystemParam)]
pub struct EventWriter<'w, E: Event> {
events: ResMut<'w, Events<E>>,
}
```
---
## Changelog
* The `SystemParam` derive is now more flexible, allowing you to omit unused lifetime parameters.
# Objective
The soundness of the ECS `World` partially relies on the correctness of the state of `Entities` stored within it. We're currently allowing users to (unsafely) mutate it, as well as readily construct it without using a `World`. While this is not strictly unsound so long as users (including `bevy_render`) safely use the APIs, it's a fairly easy path to unsoundness without much of a guard rail.
Addresses #3362 for `bevy_ecs::entity`. Incorporates the changes from #3985.
## Solution
Remove `Entities`'s `Default` implementation and force access to the type to only be through a properly constructed `World`.
Additional cleanup for other parts of `bevy_ecs::entity`:
- `Entity::index` and `Entity::generation` are no longer `pub(crate)`, opting to force the rest of bevy_ecs to use the public interface to access these values.
- `EntityMeta` is no longer `pub` and also not `pub(crate)` to attempt to cut down on updating `generation` without going through an `Entities` API. It's currently inaccessible except via the `pub(crate)` Vec on `Entities`, there was no way for an outside user to use it.
- Added `Entities::set`, an unsafe `pub(crate)` API for setting the location of an Entity (parallel to `Entities::get`) that replaces the internal case where we need to set the location of an entity when it's been spawned, moved, or despawned.
- `Entities::alloc_at_without_replacement` is only used in `World::get_or_spawn` within the first party crates, and I cannot find a public use of this API in any ecosystem crate that I've checked (via GitHub search).
- Attempted to document the few remaining undocumented public APIs in the module.
---
## Changelog
Removed: `Entities`'s `Default` implementation.
Removed: `EntityMeta`
Removed: `Entities::alloc_at_without_replacement` and `AllocAtWithoutReplacement`.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Document `bevy_ecs::archetype` and and declutter the public documentation for the module by making types non-`pub`.
Addresses #3362 for `bevy_ecs::archetype`.
## Solution
- Add module level documentation.
- Add type and API level documentation for all public facing types.
- Make `ArchetypeId`, `ArchetypeGeneration`, and `ArchetypeComponentId` truly opaque IDs that are not publicly constructable.
- Make `AddBundle` non-pub, make `Edges::get_add_bundle` return a `Option<ArchetypeId>` and fork the existing function into `Edges::get_add_bundle_internal`.
- Remove `pub(crate)` on fields that have a corresponding pub accessor function.
- Removed the `Archetypes: Default` impl, opting for a `pub(crate) fn new` alternative instead.
---
## Changelog
Added: `ArchetypeGeneration` now implements `Ord` and `PartialOrd`.
Removed: `Archetypes`'s `Default` implementation.
Removed: `Archetype::new` and `Archetype::is_empty`.
Removed: `ArchetypeId::new` and `ArchetypeId::value`.
Removed: `ArchetypeGeneration::value`
Removed: `ArchetypeIdentity`.
Removed: `ArchetypeComponentId::new` and `ArchetypeComponentId::value`.
Removed: `AddBundle`. `Edges::get_add_bundle` now returns `Option<ArchetypeId>`
# Objective
- The documentation describing different ways to spawn an Entity is missing reference to "method" for "Spawn an entity with components".
## Solution
- Update the documentation to add the reference to `World::spawn`.
# Objective
One of the use-cases for the function `Entity::from_raw` is creating placeholder entity ids, which are meant to be overwritten later. If we use a constant for this instead of `from_raw`, it is more ergonomic and self-documenting.
## Solution
Add a constant that returns an entity ID with an index of `u32::MAX` and a generation of zero. Users are instructed to overwrite this value before using it.
# Objective
- Reverts #5730.
- Fixes#6173, fixes#6596.
## Solution
Remove the warning entirely.
## Changelog
You will no longer be spammed about
> Missed 31 `bevy_input:🐭:MouseMotion` events. Consider
reading from the `EventReader` more often (generally the best
solution) or calling Events::update() less frequently
(normally this is called once per frame). This problem is most
likely due to run criteria/fixed timesteps or consuming events
conditionally. See the Events documentation for
more information.
when you miss events. These warnings were often (but not always) a false positive. You can still check this manually by using `ManualEventReader::missed_events`
