# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
Rotating vectors is a very common task. It is required for a variety of
things both within Bevy itself and in many third party plugins, for
example all over physics and collision detection, and for things like
Bevy's bounding volumes and several gizmo implementations.
For 3D, we can do this using a `Quat`, but for 2D, we do not have a
clear and efficient option. `Mat2` can be used for rotating vectors if
created using `Mat2::from_angle`, but this is not obvious to many users,
it doesn't have many rotation helpers, and the type does not give any
guarantees that it represents a valid rotation.
We should have a proper type for 2D rotations. In addition to allowing
for potential optimization, it would allow us to have a consistent and
explicitly documented representation used throughout the engine, i.e.
counterclockwise and in radians.
## Representation
The mathematical formula for rotating a 2D vector is the following:
```
new_x = x * cos - y * sin
new_y = x * sin + y * cos
```
Here, `sin` and `cos` are the sine and cosine of the rotation angle.
Computing these every time when a vector needs to be rotated can be
expensive, so the rotation shouldn't be just an `f32` angle. Instead, it
is often more efficient to represent the rotation using the sine and
cosine of the angle instead of storing the angle itself. This can be
freely passed around and reused without unnecessary computations.
The two options are either a 2x2 rotation matrix or a unit complex
number where the cosine is the real part and the sine is the imaginary
part. These are equivalent for the most part, but the unit complex
representation is a bit more memory efficient (two `f32`s instead of
four), so I chose that. This is like Nalgebra's
[`UnitComplex`](https://docs.rs/nalgebra/latest/nalgebra/geometry/type.UnitComplex.html)
type, which can be used for the
[`Rotation2`](https://docs.rs/nalgebra/latest/nalgebra/geometry/type.Rotation2.html)
type.
## Implementation
Add a `Rotation2d` type represented as a unit complex number:
```rust
/// A counterclockwise 2D rotation in radians.
///
/// The rotation angle is wrapped to be within the `]-pi, pi]` range.
pub struct Rotation2d {
/// The cosine of the rotation angle in radians.
///
/// This is the real part of the unit complex number representing the rotation.
pub cos: f32,
/// The sine of the rotation angle in radians.
///
/// This is the imaginary part of the unit complex number representing the rotation.
pub sin: f32,
}
```
Using it is similar to using `Quat`, but in 2D:
```rust
let rotation = Rotation2d::radians(PI / 2.0);
// Rotate vector (also works on Direction2d!)
assert_eq!(rotation * Vec2::X, Vec2::Y);
// Get angle as degrees
assert_eq!(rotation.as_degrees(), 90.0);
// Getting sin and cos is free
let (sin, cos) = rotation.sin_cos();
// "Subtract" rotations
let rotation2 = Rotation2d::FRAC_PI_4; // there are constants!
let diff = rotation * rotation2.inverse();
assert_eq!(diff.as_radians(), PI / 4.0);
// This is equivalent to the above
assert_eq!(rotation2.angle_between(rotation), PI / 4.0);
// Lerp
let rotation1 = Rotation2d::IDENTITY;
let rotation2 = Rotation2d::FRAC_PI_2;
let result = rotation1.lerp(rotation2, 0.5);
assert_eq!(result.as_radians(), std::f32::consts::FRAC_PI_4);
// Slerp
let rotation1 = Rotation2d::FRAC_PI_4);
let rotation2 = Rotation2d::degrees(-180.0); // we can use degrees too!
let result = rotation1.slerp(rotation2, 1.0 / 3.0);
assert_eq!(result.as_radians(), std::f32::consts::FRAC_PI_2);
```
There's also a `From<f32>` implementation for `Rotation2d`, which means
that methods can still accept radians as floats if the argument uses
`impl Into<Rotation2d>`. This means that adding `Rotation2d` shouldn't
even be a breaking change.
---
## Changelog
- Added `Rotation2d`
- Bounding volume methods now take an `impl Into<Rotation2d>`
- Gizmo methods with rotation now take an `impl Into<Rotation2d>`
## Future use cases
- Collision detection (a type like this is quite essential considering
how common vector rotations are)
- `Transform` helpers (e.g. return a 2D rotation about the Z axis from a
`Transform`)
- The rotation used for `Transform2d` (#8268)
- More gizmos, maybe meshes... everything in 2D that uses rotation
---------
Co-authored-by: Tristan Guichaoua <33934311+tguichaoua@users.noreply.github.com>
Co-authored-by: Robert Walter <robwalter96@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
- As part of the migration process we need to a) see the end effect of
the migration on user ergonomics b) check for serious perf regressions
c) actually migrate the code
- To accomplish this, I'm going to attempt to migrate all of the
remaining user-facing usages of `LegacyColor` in one PR, being careful
to keep a clean commit history.
- Fixes#12056.
## Solution
I've chosen to use the polymorphic `Color` type as our standard
user-facing API.
- [x] Migrate `bevy_gizmos`.
- [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs
- [x] Migrate sprites
- [x] Migrate UI
- [x] Migrate `ColorMaterial`
- [x] Migrate `MaterialMesh2D`
- [x] Migrate fog
- [x] Migrate lights
- [x] Migrate StandardMaterial
- [x] Migrate wireframes
- [x] Migrate clear color
- [x] Migrate text
- [x] Migrate gltf loader
- [x] Register color types for reflection
- [x] Remove `LegacyColor`
- [x] Make sure CI passes
Incidental improvements to ease migration:
- added `Color::srgba_u8`, `Color::srgba_from_array` and friends
- added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the
`Alpha` trait
- add and immediately deprecate (lol) `Color::rgb` and friends in favor
of more explicit and consistent `Color::srgb`
- standardized on white and black for most example text colors
- added vector field traits to `LinearRgba`: ~~`Add`, `Sub`,
`AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications
and divisions do not scale alpha. `Add` and `Sub` have been cut from
this PR.
- added `LinearRgba` and `Srgba` `RED/GREEN/BLUE`
- added `LinearRgba_to_f32_array` and `LinearRgba::to_u32`
## Migration Guide
Bevy's color types have changed! Wherever you used a
`bevy::render::Color`, a `bevy::color::Color` is used instead.
These are quite similar! Both are enums storing a color in a specific
color space (or to be more precise, using a specific color model).
However, each of the different color models now has its own type.
TODO...
- `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`,
`Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`,
`Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`.
- `Color::set_a` and `Color::a` is now `Color::set_alpha` and
`Color::alpha`. These are part of the `Alpha` trait in `bevy_color`.
- `Color::is_fully_transparent` is now part of the `Alpha` trait in
`bevy_color`
- `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for
`g`, `b` `h`, `s` and `l` have been removed due to causing silent
relatively expensive conversions. Convert your `Color` into the desired
color space, perform your operations there, and then convert it back
into a polymorphic `Color` enum.
- `Color::hex` is now `Srgba::hex`. Call `.into` or construct a
`Color::Srgba` variant manually to convert it.
- `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`,
`ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now
store a `LinearRgba`, rather than a polymorphic `Color`
- `Color::rgb_linear` and `Color::rgba_linear` are now
`Color::linear_rgb` and `Color::linear_rgba`
- The various CSS color constants are no longer stored directly on
`Color`. Instead, they're defined in the `Srgba` color space, and
accessed via `bevy::color::palettes::css`. Call `.into()` on them to
convert them into a `Color` for quick debugging use, and consider using
the much prettier `tailwind` palette for prototyping.
- The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with
the standard naming.
- Vector field arithmetic operations on `Color` (add, subtract, multiply
and divide by a f32) have been removed. Instead, convert your colors
into `LinearRgba` space, and perform your operations explicitly there.
This is particularly relevant when working with emissive or HDR colors,
whose color channel values are routinely outside of the ordinary 0 to 1
range.
- `Color::as_linear_rgba_f32` has been removed. Call
`LinearRgba::to_f32_array` instead, converting if needed.
- `Color::as_linear_rgba_u32` has been removed. Call
`LinearRgba::to_u32` instead, converting if needed.
- Several other color conversion methods to transform LCH or HSL colors
into float arrays or `Vec` types have been removed. Please reimplement
these externally or open a PR to re-add them if you found them
particularly useful.
- Various methods on `Color` such as `rgb` or `hsl` to convert the color
into a specific color space have been removed. Convert into
`LinearRgba`, then to the color space of your choice.
- Various implicitly-converting color value methods on `Color` such as
`r`, `g`, `b` or `h` have been removed. Please convert it into the color
space of your choice, then check these properties.
- `Color` no longer implements `AsBindGroup`. Store a `LinearRgba`
internally instead to avoid conversion costs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Split up from #12017, rename Bevy's direction types.
Currently, Bevy has the `Direction2d`, `Direction3d`, and `Direction3dA`
types, which provide a type-level guarantee that their contained vectors
remain normalized. They can be very useful for a lot of APIs for safety,
explicitness, and in some cases performance, as they can sometimes avoid
unnecessary normalizations.
However, many consider them to be inconvenient to use, and opt for
standard vector types like `Vec3` because of this. One reason is that
the direction type names are a bit long and can be annoying to write (of
course you can use autocomplete, but just typing `Vec3` is still nicer),
and in some intances, the extra characters can make formatting worse.
The naming is also inconsistent with Glam's shorter type names, and
results in names like `Direction3dA`, which (in my opinion) are
difficult to read and even a bit ugly.
This PR proposes renaming the types to `Dir2`, `Dir3`, and `Dir3A`.
These names are nice and easy to write, consistent with Glam, and work
well for variants like the SIMD aligned `Dir3A`. As a bonus, it can also
result in nicer formatting in a lot of cases, which can be seen from the
diff of this PR.
Some examples of what it looks like: (copied from #12017)
```rust
// Before
let ray_cast = RayCast2d::new(Vec2::ZERO, Direction2d::X, 5.0);
// After
let ray_cast = RayCast2d::new(Vec2::ZERO, Dir2::X, 5.0);
```
```rust
// Before (an example using Bevy XPBD)
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Direction3d::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
// After
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Dir3::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
```
```rust
// Before
self.circle(
Vec3::new(0.0, -2.0, 0.0),
Direction3d::Y,
5.0,
Color::TURQUOISE,
);
// After (formatting is collapsed in this case)
self.circle(Vec3::new(0.0, -2.0, 0.0), Dir3::Y, 5.0, Color::TURQUOISE);
```
## Solution
Rename `Direction2d`, `Direction3d`, and `Direction3dA` to `Dir2`,
`Dir3`, and `Dir3A`.
---
## Migration Guide
The `Direction2d` and `Direction3d` types have been renamed to `Dir2`
and `Dir3`.
## Additional Context
This has been brought up on the Discord a few times, and we had a small
[poll](https://discord.com/channels/691052431525675048/1203087353850364004/1212465038711984158)
on this. `Dir2`/`Dir3`/`Dir3A` was quite unanimously chosen as the best
option, but of course it was a very small poll and inconclusive, so
other opinions are certainly welcome too.
---------
Co-authored-by: IceSentry <c.giguere42@gmail.com>
# Objective
This PR arose as part of the migration process for `bevy_color`: see
#12056.
While examining how `bevy_gizmos` stores color types internally, I found
that rather than storing a `Color` internally, it actually stores a
`[f32;4]` for a linear RGB, type aliased to a `ColorItem`.
While we don't *have* to clean this up to complete the migration, now
that we have explicit strong typing for linear color types we should use
them rather than replicating this idea throughout the codebase.
## Solution
- Added `LinearRgba::NAN`, for when you want to do cursed rendering
things.
- Replaced the internal color representation in `bevy_gizmo`: this was
`ColorItem`, but is now `LinearRgba`.
- `LinearRgba` is now `Pod`, enabling us to use the same fast `bytemuck`
bit twiddling tricks that we were using before. This requires:
1. Forcing `LinearRgba` to be `repr(C)`
2. Implementing `Zeroable`, and unsafe trait which defines what the
struct looks like when all values are zero.
3. Implementing `Pod`, a marker trait with stringent safety requirements
that is required for "plain old data".
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Split up from #12017, add an aligned version of `Direction3d` for SIMD,
and move direction types out of `primitives`.
## Solution
Add `Direction3dA` and move direction types into a new `direction`
module.
---
## Migration Guide
The `Direction2d`, `Direction3d`, and `InvalidDirectionError` types have
been moved out of `bevy::math::primitives`.
Before:
```rust
use bevy::math::primitives::Direction3d;
```
After:
```rust
use bevy::math::Direction3d;
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Fix weird visuals when drawing a gizmo with a non-normed normal.
Fixes#11401
## Solution
Just normalize right before we draw. Could do it when constructing the
builder but that seems less consistent.
## Changelog
- gizmos.circle normal is now a Direction3d instead of a Vec3.
## Migration Guide
- Pass a Direction3d for gizmos.circle normal, eg.
`Direction3d::new(vec).unwrap_or(default)` or potentially
`Direction3d::new_unchecked(vec)` if you know your vec is definitely
normalized.
# Objective
This PR aims to implement multiple configs for gizmos as discussed in
#9187.
## Solution
Configs for the new `GizmoConfigGroup`s are stored in a
`GizmoConfigStore` resource and can be accesses using a type based key
or iterated over. This type based key doubles as a standardized location
where plugin authors can put their own configuration not covered by the
standard `GizmoConfig` struct. For example the `AabbGizmoGroup` has a
default color and toggle to show all AABBs. New configs can be
registered using `app.init_gizmo_group::<T>()` during startup.
When requesting the `Gizmos<T>` system parameter the generic type
determines which config is used. The config structs are available
through the `Gizmos` system parameter allowing for easy access while
drawing your gizmos.
Internally, resources and systems used for rendering (up to an including
the extract system) are generic over the type based key and inserted on
registering a new config.
## Alternatives
The configs could be stored as components on entities with markers which
would make better use of the ECS. I also implemented this approach
([here](https://github.com/jeliag/bevy/tree/gizmo-multiconf-comp)) and
believe that the ergonomic benefits of a central config store outweigh
the decreased use of the ECS.
## Unsafe Code
Implementing system parameter by hand is unsafe but seems to be required
to access the config store once and not on every gizmo draw function
call. This is critical for performance. ~Is there a better way to do
this?~
## Future Work
New gizmos (such as #10038, and ideas from #9400) will require custom
configuration structs. Should there be a new custom config for every
gizmo type, or should we group them together in a common configuration?
(for example `EditorGizmoConfig`, or something more fine-grained)
## Changelog
- Added `GizmoConfigStore` resource and `GizmoConfigGroup` trait
- Added `init_gizmo_group` to `App`
- Added early returns to gizmo drawing increasing performance when
gizmos are disabled
- Changed `GizmoConfig` and aabb gizmos to use new `GizmoConfigStore`
- Changed `Gizmos` system parameter to use type based key to retrieve
config
- Changed resources and systems used for gizmo rendering to be generic
over type based key
- Changed examples (3d_gizmos, 2d_gizmos) to showcase new API
## Migration Guide
- `GizmoConfig` is no longer a resource and has to be accessed through
`GizmoConfigStore` resource. The default config group is
`DefaultGizmoGroup`, but consider using your own custom config group if
applicable.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
## Objective
- Split different types of gizmos into their own files
## Solution
- Move `arc_2d` and `Arc2dBuilder` into `arcs.rs`
- turns out there's no 3d arc function! I'll add one Soon(TM) in another
MR
## Changelog
- Changed
- moved `gizmos::Arc2dBuilder` to `gizmos::arcs::Arc2dBuilder`
## Migration Guide
- `gizmos::Arc2dBuilder` -> `gizmos::arcs::Arc2dBuilder`
## Objective
- Give all the intuitive groups of gizmos their own file
- don't be a breaking change
- don't change Gizmos interface
- eventually do arcs too
- future types of gizmos should be in their own files
- see also https://github.com/bevyengine/bevy/issues/9400
## Solution
- Moved `gizmos.circle`, `gizmos.2d_circle`, and assorted helpers into
`circles.rs`
- Can also do arcs in this MR if y'all want; just figured I should do
one thing at a time.
## Changelog
- Changed
- `gizmos::CircleBuilder` moved to `gizmos::circles::Circle2dBuilder`
- `gizmos::Circle2dBuilder` moved to `gizmos::circles::Circle2dBuilder`
## Migration Guide
- change `gizmos::CircleBuilder` to `gizmos::circles::Circle2dBuilder`
- change `gizmos::Circle2dBuilder` to `gizmos::circles::Circle2dBuilder`
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Updates for rust 1.73
## Solution
- new doc check for `redundant_explicit_links`
- updated to text for compile fail tests
---
## Changelog
- updates for rust 1.73
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Repeat in `Gizmos` that they are drawned in immediate mode, which is
said at the module level but not here, and detail what it means.
- Clarify for every method of `Gizmos` that they should be called for
every frame.
- Clarify which methods belong to 3D or 2D space (kinda obvious for 2D
but still)
The first time I used gizmos I didn't understand how they work and was
confused as to why nothing showed up.
---------
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fix typos throughout the project.
## Solution
[`typos`](https://github.com/crate-ci/typos) project was used for
scanning, but no automatic corrections were applied. I checked
everything by hand before fixing.
Most of the changes are documentation/comments corrections. Also, there
are few trivial changes to code (variable name, pub(crate) function name
and a few error/panic messages).
## Unsolved
`bevy_reflect_derive` has
[typo](1b51053f19/crates/bevy_reflect/bevy_reflect_derive/src/type_path.rs (L76))
in enum variant name that I didn't fix. Enum is `pub(crate)`, so there
shouldn't be any trouble if fixed. However, code is tightly coupled with
macro usage, so I decided to leave it for more experienced contributor
just in case.
# Objective
Add a bounding box gizmo
## Changes
- Added the `AabbGizmo` component that will draw the `Aabb` component on
that entity.
- Added an option to draw all bounding boxes in a scene on the
`GizmoConfig` resource.
- Added `TransformPoint` trait to generalize over the point
transformation methods on various transform types (e.g `Transform` and
`GlobalTransform`).
- Changed the `Gizmos::cuboid` method to accept an `impl TransformPoint`
instead of separate translation, rotation, and scale.
# Objective
Added the possibility to draw arcs in 2d via gizmos
## Solution
- Added `arc_2d` function to `Gizmos`
- Added `arc_inner` function
- Added `Arc2dBuilder<'a, 's>`
- Updated `2d_gizmos.rs` example to draw an arc
---------
Co-authored-by: kjolnyr <kjolnyr@protonmail.ch>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: ira <JustTheCoolDude@gmail.com>
# Objective
Avoid queuing empty meshes for rendering.
Should prevent #8144 from triggering when no gizmos are in use. Not a
real fix, unfortunately.
## Solution
Add an `in_use` field to `GizmoStorage` and only set it to true when
there are gizmos to draw.
# Objective
Fix#8179
## Solution
- Added `#![warn(missing_docs)]` and document all public items. All
methods on `Gizmos` have doc examples.
- Expanded the docs on the module/crate. Some unfortunate duplication
there :/
- Moved the methods from `GizmoBuffer` to be directly on `Gizmos` and
made `GizmoBuffer` private. This means the methods on `Gizmos` will show
up on its doc page.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Add a convenient immediate mode drawing API for visual debugging.
Fixes#5619
Alternative to #1625
Partial alternative to #5734
Based off https://github.com/Toqozz/bevy_debug_lines with some changes:
* Simultaneous support for 2D and 3D.
* Methods for basic shapes; circles, spheres, rectangles, boxes, etc.
* 2D methods.
* Removed durations. Seemed niche, and can be handled by users.
<details>
<summary>Performance</summary>
Stress tested using Bevy's recommended optimization settings for the dev
profile with the
following command.
```bash
cargo run --example many_debug_lines \
--config "profile.dev.package.\"*\".opt-level=3" \
--config "profile.dev.opt-level=1"
```
I dipped to 65-70 FPS at 300,000 lines
CPU: 3700x
RAM Speed: 3200 Mhz
GPU: 2070 super - probably not very relevant, mostly cpu/memory bound
</details>
<details>
<summary>Fancy bloom screenshot</summary>
</details>
## Changelog
* Added `GizmoPlugin`
* Added `Gizmos` system parameter for drawing lines and wireshapes.
### TODO
- [ ] Update changelog
- [x] Update performance numbers
- [x] Add credit to PR description
### Future work
- Cache rendering primitives instead of constructing them out of line
segments each frame.
- Support for drawing solid meshes
- Interactions. (See
[bevy_mod_gizmos](https://github.com/LiamGallagher737/bevy_mod_gizmos))
- Fancier line drawing. (See
[bevy_polyline](https://github.com/ForesightMiningSoftwareCorporation/bevy_polyline))
- Support for `RenderLayers`
- Display gizmos for a certain duration. Currently everything displays
for one frame (ie. immediate mode)
- Changing settings per drawn item like drawing on top or drawing to
different `RenderLayers`
Co-Authored By: @lassade <felipe.jorge.pereira@gmail.com>
Co-Authored By: @The5-1 <agaku@hotmail.de>
Co-Authored By: @Toqozz <toqoz@hotmail.com>
Co-Authored By: @nicopap <nico@nicopap.ch>
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: IceSentry <c.giguere42@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
