# Objective
Currently, the term "value" in the context of reflection is a bit
overloaded.
For one, it can be used synonymously with "data" or "variable". An
example sentence would be "this function takes a reflected value".
However, it is also used to refer to reflected types which are
`ReflectKind::Value`. These types are usually either primitives, opaque
types, or types that don't fall into any other `ReflectKind` (or perhaps
could, but don't due to some limitation/difficulty). An example sentence
would be "this function takes a reflected value type".
This makes it difficult to write good documentation or other learning
material without causing some amount of confusion to readers. Ideally,
we'd be able to move away from the `ReflectKind::Value` usage and come
up with a better term.
## Solution
This PR replaces the terminology of "value" with "opaque" across
`bevy_reflect`. This includes in documentation, type names, variant
names, and macros.
The term "opaque" was chosen because that's essentially how the type is
treated within the reflection API. In other words, its internal
structure is hidden. All we can do is work with the type itself.
### Primitives
While primitives are not technically opaque types, I think it's still
clearer to refer to them as "opaque" rather than keep the confusing
"value" terminology.
We could consider adding another concept for primitives (e.g.
`ReflectKind::Primitive`), but I'm not sure that provides a lot of
benefit right now. In most circumstances, they'll be treated just like
an opaque type. They would also likely use the same macro (or two copies
of the same macro but with different names).
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Migration Guide
The reflection concept of "value type" has been replaced with a clearer
"opaque type". The following renames have been made to account for this:
- `ReflectKind::Value` → `ReflectKind::Opaque`
- `ReflectRef::Value` → `ReflectRef::Opaque`
- `ReflectMut::Value` → `ReflectMut::Opaque`
- `ReflectOwned::Value` → `ReflectOwned::Opaque`
- `TypeInfo::Value` → `TypeInfo::Opaque`
- `ValueInfo` → `OpaqueInfo`
- `impl_reflect_value!` → `impl_reflect_opaque!`
- `impl_from_reflect_value!` → `impl_from_reflect_opaque!`
Additionally, declaring your own opaque types no longer uses
`#[reflect_value]`. This attribute has been replaced by
`#[reflect(opaque)]`:
```rust
// BEFORE
#[derive(Reflect)]
#[reflect_value(Default)]
struct MyOpaqueType(u32);
// AFTER
#[derive(Reflect)]
#[reflect(opaque)]
#[reflect(Default)]
struct MyOpaqueType(u32);
```
Note that the order in which `#[reflect(opaque)]` appears does not
matter.
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.24.5 to
1.24.6.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.24.6</h2>
<h2>[1.24.6] - 2024-09-16</h2>
<h3>Fixes</h3>
<ul>
<li>Respect negation (<code>!</code>) in
<code>extend-exclude</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.24.6] - 2024-09-16</h2>
<h3>Fixes</h3>
<ul>
<li>Respect negation (<code>!</code>) in
<code>extend-exclude</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8e6a4285bc"><code>8e6a428</code></a>
chore: Release</li>
<li><a
href="cab7c3c4a5"><code>cab7c3c</code></a>
docs: Update changelog</li>
<li><a
href="c4a6592239"><code>c4a6592</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1100">#1100</a>
from epage/invert</li>
<li><a
href="ad3538f719"><code>ad3538f</code></a>
refactor(cli): Switch from Overrides to Gitignore</li>
<li><a
href="d9b55f966c"><code>d9b55f9</code></a>
fix(cli): Allow negative expressions in extend-exclude</li>
<li><a
href="777cf42dc2"><code>777cf42</code></a>
refactor(cli): Be explicit in overrides</li>
<li><a
href="0e8148fbbd"><code>0e8148f</code></a>
test(cli): Show inverted extend-exclude behavior</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.24.5...v1.24.6">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- Fixes#14924
- Closes#9584
## Solution
- We introduce a new trait, `SystemInput`, that serves as a type
function from the `'static` form of the input, to its lifetime'd
version, similarly to `SystemParam` or `WorldQuery`.
- System functions now take the lifetime'd wrapped version,
`SystemInput::Param<'_>`, which prevents the issue presented in #14924
(i.e. `InRef<T>`).
- Functions for running systems now take the lifetime'd unwrapped
version, `SystemInput::Inner<'_>` (i.e. `&T`).
- Due to the above change, system piping had to be re-implemented as a
standalone type, rather than `CombinatorSystem` as it was previously.
- Removes the `Trigger<'static, E, B>` transmute in observer runner
code.
## Testing
- All current tests pass.
- Added additional tests and doc-tests.
---
## Showcase
```rust
let mut world = World::new();
let mut value = 2;
// Currently possible:
fn square(In(input): In<usize>) -> usize {
input * input
}
value = world.run_system_once_with(value, square);
// Now possible:
fn square_mut(InMut(input): InMut<usize>) {
*input *= *input;
}
world.run_system_once_with(&mut value, square_mut);
// Or:
fn square_ref(InRef(input): InRef<usize>) -> usize {
*input * *input
}
value = world.run_system_once_with(&value, square_ref);
```
## Migration Guide
- All current explicit usages of the following types must be changed in
the way specified:
- `SystemId<I, O>` to `SystemId<In<I>, O>`
- `System<In = T>` to `System<In = In<T>>`
- `IntoSystem<I, O, M>` to `IntoSystem<In<I>, O, M>`
- `Condition<M, T>` to `Condition<M, In<T>>`
- `In<Trigger<E, B>>` is no longer a valid input parameter type. Use
`Trigger<E, B>` directly, instead.
---------
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
# Objective
Fixes#15351
## Solution
- Created new external crate and ported over the code
## Testing
- CI
## Migration guide
Replace references to `bevy_utils::ShortName` with
`disqualified::ShortName`.
# Objective
- Fix https://github.com/bevyengine/bevy/issues/15366. `cosmic-text`
buffers refuse to function if the `Metrics` font size is zero.
## Solution
- Trick `cosmic-text` into clearing its internal buffer when the largest
font size of segments is zero by sending it no spans and a tiny
`Metrics::font_size` and `Metrics::line_height`.
## Testing
- [x] Fixes @brandon-reinhart 's bug.
# Objective
- Fixes#10720
- Adds the ability to control font smoothing of rendered text
## Solution
- Introduce the `FontSmoothing` enum, with two possible variants
(`FontSmoothing::None` and `FontSmoothing::AntiAliased`):
- This is based on `-webkit-font-smoothing`, in line with our practice
of adopting CSS-like properties/names for UI;
- I could have gone instead for the [`font-smooth`
property](https://developer.mozilla.org/en-US/docs/Web/CSS/font-smooth)
that's also supported by browsers, but didn't since it's also
non-standard, has an uglier name, and doesn't allow controlling the type
of antialias applied.
- Having an enum instead of e.g. a boolean, leaves the path open for
adding `FontSmoothing::SubpixelAntiAliased` in the future, without a
breaking change;
- Add all the necessary plumbing to get the `FontSmoothing` information
to where we rasterize the glyphs and store them in the atlas;
- Change the font atlas key to also take into account the smoothing
setting, not only font and font size;
- Since COSMIC Text [doesn't support controlling font
smoothing](https://github.com/pop-os/cosmic-text/issues/279), we roll
out our own threshold-based “implementation”:
- This has the downside of **looking ugly for “regular” vector fonts**
⚠️, since it doesn't properly take the hinting information into account
like a proper implementation on the rasterizer side would.
- However, **for fonts that have been specifically authored to be pixel
fonts, (a common use case in games!) this is not as big of a problem**,
since all lines are vertical/horizontal, and close to the final pixel
boundaries (as long as the font is used at a multiple of the size
originally intended by the author)
- Once COSMIC exposes this functionality, we can switch to using it
directly, and get better results;
- Use a nearest neighbor sampler for atlases with font smoothing
disabled, so that you can scale the text via transform and still get the
pixelated look;
- Add a convenience method to `Text` for setting the font smoothing;
- Add a demonstration of using the `FontSmoothing` property to the
`text2d` example.
## Testing
- Did you test these changes? If so, how?
- Yes. Via the `text2d`example, and also in my game.
- Are there any parts that need more testing?
- I'd like help from someone for testing this on devices/OSs with
fractional scaling (Android/Windows)
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Both via the `text2d` example and also by using it directly on your
projects.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- macOS
---
## Showcase
```rust
commands.spawn(Text2dBundle {
text: Text::from_section("Hello, World!", default())
.with_font_smoothing(FontSmoothing::None),
..default()
});
```
<img width="740" alt="image"
src="https://github.com/user-attachments/assets/b881b02c-4e43-410b-902f-6985c25140fc">
## Migration Guide
- `Text` now contains a `font_smoothing: FontSmoothing` property, make
sure to include it or add `..default()` when using the struct directly;
- `FontSizeKey` has been renamed to `FontAtlasKey`, and now also
contains the `FontSmoothing` setting;
- The following methods now take an extra `font_smoothing:
FontSmoothing` argument:
- `FontAtlas::new()`
- `FontAtlasSet::add_glyph_to_atlas()`
- `FontAtlasSet::get_glyph_atlas_info()`
- `FontAtlasSet::get_outlined_glyph_texture()`
# Objective
In order to derive `Reflect`, all of a struct's fields must implement
`FromReflect`. [As part of looking into some of the work mentioned
here](https://github.com/bevyengine/bevy/issues/13713#issuecomment-2364786694),
I noticed that `TextureFormat` doesn't implement `Reflect`, and decided
to split that into a separate PR.
## Solution
I decided that `TextureFormat` should be a `reflect_value` since,
although one variant has fields, most users will treat this as an opaque
value set explicitly. It also substantially reduces the complexity of
the implementation.
For now, this implementation isn't actually used by any crates, so, I
decided to not preemptively enable the feature on anything. But it's
technically an option, now, and more `wgpu` types can be added in the
future.
## Testing
Everything compiles okay, and I can't really see how this could be done
incorrectly given the above constraints.
# Objective
Currently, Bevy implements reflection for `glam::EulerRot` using:
```rs
impl_reflect_value!(::glam::EulerRot(Debug, Default, Deserialize, Serialize));
```
Treating it as an opaque type. However, it's useful to expose the
EulerRot enum variants directly, which I make use of from a drop down
selection box in `bevy_egui`. This PR changes this to use
`impl_reflect!`.
**Importantly**, Bevy currently uses glam 0.28.0, in which `EulerRot`
has just 6 variants. In glam 0.29.0, this is exanded to 24 variants, see
bb2ab05613.
When Bevy updates to 0.29.0, this reflect impl must also be updated to
include the new variants.
## Solution
Replaces the `impl_reflect_value!` with `impl_reflect!` and a
handwritten version of `EulerRot` with the same variants.
## Testing
Added a `tests` module to `glam.rs` to ensure that de/serialization
works. However, my main concern is making sure that the number of enum
variants matches glam's, which I'm not sure how to do using `Enum`.
# Objective
There's currently no way to iterate through all the type data in a
`TypeRegistration`. While these are all type-erased, it can still be
useful to see what types (by `TypeId`) are registered for a given type.
Additionally, it might be good to have ways of dynamically working with
`TypeRegistration`.
## Solution
Added a way to iterate through all type data on a given
`TypeRegistration`. This PR also adds methods for working with type data
dynamically as well as methods for conveniently checking if a given type
data exists on the registration.
I also took this opportunity to reorganize the methods on
`TypeRegistration` as it has always bothered me haha (i.e. the
constructor not being at the top, etc.).
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect
```
---
## Showcase
The type-erased type data on a `TypeRegistration` can now be iterated!
```rust
#[derive(Reflect)]
struct Foo;
#[derive(Clone)]
struct DataA(i32);
#[derive(Clone)]
struct DataB(i32);
let mut registration = TypeRegistration::of::<Foo>();
registration.insert(DataA(123));
registration.insert(DataB(456));
let mut iter = registration.iter();
let (id, data) = iter.next().unwrap();
assert_eq!(id, TypeId::of::<DataA>());
assert_eq!(data.downcast_ref::<DataA>().unwrap().0, 123);
let (id, data) = iter.next().unwrap();
assert_eq!(id, TypeId::of::<DataB>());
assert_eq!(data.downcast_ref::<DataB>().unwrap().0, 456);
assert!(iter.next().is_none());
```
# Objective
- Fixes#8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
Currently, Bevy restricts animation clips to animating
`Transform::translation`, `Transform::rotation`, `Transform::scale`, or
`MorphWeights`, which correspond to the properties that glTF can
animate. This is insufficient for many use cases such as animating UI,
as the UI layout systems expect to have exclusive control over UI
elements' `Transform`s and therefore the `Style` properties must be
animated instead.
This commit fixes this, allowing for `AnimationClip`s to animate
arbitrary properties. The `Keyframes` structure has been turned into a
low-level trait that can be implemented to achieve arbitrary animation
behavior. Along with `Keyframes`, this patch adds a higher-level trait,
`AnimatableProperty`, that simplifies the task of animating single
interpolable properties. Built-in `Keyframes` implementations exist for
translation, rotation, scale, and morph weights. For the most part, you
can migrate by simply changing your code from
`Keyframes::Translation(...)` to `TranslationKeyframes(...)`, and
likewise for rotation, scale, and morph weights.
An example `AnimatableProperty` implementation for the font size of a
text section follows:
#[derive(Reflect)]
struct FontSizeProperty;
impl AnimatableProperty for FontSizeProperty {
type Component = Text;
type Property = f32;
fn get_mut(component: &mut Self::Component) -> Option<&mut
Self::Property> {
Some(&mut component.sections.get_mut(0)?.style.font_size)
}
}
In order to keep this patch relatively small, this patch doesn't include
an implementation of `AnimatableProperty` on top of the reflection
system. That can be a follow-up.
This patch builds on top of the new `EntityMutExcept<>` type in order to
widen the `AnimationTarget` query to include write access to all
components. Because `EntityMutExcept<>` has some performance overhead
over an explicit query, we continue to explicitly query `Transform` in
order to avoid regressing the performance of skeletal animation, such as
the `many_foxes` benchmark. I've measured the performance of that
benchmark and have found no significant regressions.
A new example, `animated_ui`, has been added. This example shows how to
use Bevy's built-in animation infrastructure to animate font size and
color, which wasn't possible before this patch.
## Showcase
https://github.com/user-attachments/assets/1fa73492-a9ce-405a-a8f2-4aacd7f6dc97
## Migration Guide
* Animation keyframes are now an extensible trait, not an enum. Replace
`Keyframes::Translation(...)`, `Keyframes::Scale(...)`,
`Keyframes::Rotation(...)`, and `Keyframes::Weights(...)` with
`Box::new(TranslationKeyframes(...))`, `Box::new(ScaleKeyframes(...))`,
`Box::new(RotationKeyframes(...))`, and
`Box::new(MorphWeightsKeyframes(...))` respectively.
# Objective
Functions created into `DynamicFunction[Mut]` do not currently validate
the number of arguments they are given before calling the function.
I originally did this because I felt users would want to validate this
themselves in the function rather than have it be done
behind-the-scenes. I'm now realizing, however, that we could remove this
boilerplate and if users wanted to check again then they would still be
free to do so (it'd be more of a sanity check at that point).
## Solution
Automatically validate the number of arguments passed to
`DynamicFunction::call` and `DynamicFunctionMut::call[_once]`.
This is a pretty trivial change since we just need to compare the length
of the `ArgList` to the length of the `[ArgInfo]` in the function's
`FunctionInfo`.
I also ran the benchmarks just in case and saw no regression by doing
this.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
# Objective
The goal of this PR is to introduce `SystemParam` validation in order to
reduce runtime panics.
Fixes#15265
## Solution
`SystemParam` now has a new method `validate_param(...) -> bool`, which
takes immutable variants of `get_param` arguments. The returned value
indicates whether the parameter can be acquired from the world. If
parameters cannot be acquired for a system, it won't be executed,
similarly to run conditions. This reduces panics when using params like
`Res`, `ResMut`, etc. as well as allows for new, ergonomic params like
#15264 or #15302.
Param validation happens at the level of executors. All validation
happens directly before executing a system, in case of normal systems
they are skipped, in case of conditions they return false.
Warning about system skipping is primitive and subject to change in
subsequent PRs.
## Testing
Two executor tests check that all executors:
- skip systems which have invalid parameters:
- piped systems get skipped together,
- dependent systems still run correctly,
- skip systems with invalid run conditions:
- system conditions have invalid parameters,
- system set conditions have invalid parameters.
# Objective
#13320 added convenience methods for casting a `TypeInfo` into its
respective variant:
```rust
let info: &TypeInfo = <Vec<i32> as Typed>::type_info();
// We know `info` contains a `ListInfo`, so we can simply cast it:
let list_info: &ListInfo = info.as_list().unwrap();
```
This is especially helpful when you have already verified a type is a
certain kind via `ReflectRef`, `ReflectMut`, `ReflectOwned`, or
`ReflectKind`.
As mentioned in that PR, though, it would be useful to add similar
convenience methods to those types as well.
## Solution
Added convenience casting methods to `ReflectRef`, `ReflectMut`, and
`ReflectOwned`.
With these methods, I was able to reduce our nesting in certain places
throughout the crate.
Additionally, I took this opportunity to move these types (and
`ReflectKind`) to their own module to help clean up the `reflect`
module.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Showcase
Convenience methods for casting `ReflectRef`, `ReflectMut`, and
`ReflectOwned` into their respective variants has been added! This
allows you to write cleaner code if you already know the kind of your
reflected data:
```rust
// BEFORE
let ReflectRef::List(list) = list.reflect_ref() else {
panic!("expected list");
};
// AFTER
let list = list.reflect_ref().as_list().unwrap();
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pablo Reinhardt <126117294+pablo-lua@users.noreply.github.com>
# Objective
Working with `World` is painful due to lifetime issues and a lack of
ergonomics, so you may want to delegate to the system API. Your current
options are:
- `world.run_system_once`, which initializes the system each time it's
called (performance cost) and doesn't support `Local`. The docs
recommend users not use this method outside of diagnostic use cases like
unit tests.
- `world.run_system`, which requires you to register the system and
store the `SystemId` somewhere (made easier by implementing `FromWorld`
for a newtyped `Local`, unless you're in e.g. a custom `Command` impl).
These options work, but you're choosing between a performance cost and
an ergonomic challenge.
## Solution
Provide a cached `run_system` API that accepts an `S: IntoSystem` and
checks for a `CachedSystemId<S::System>(SystemId)` resource. If it
doesn't exist, it will register the system and save its `SystemId` in
that resource.
In other words, it hides the "save the `SystemId` in a `Local` or
`Resource`" pattern as an implementation detail.
Prior work: https://github.com/bevyengine/bevy/pull/10469.
## Testing
This approach worked in a proof-of-concept:
b34ee29531/src/util/patch/run_system_cached.rs (L35).
A new unit test was added and it passes in CI.
# Objective
Fixes#15306
## Solution
- Add feature gate on the module and the place where each one is used
- Declare the features and make them default
## Testing
- CI
**Note:** This is an adoption of @Shfty 's adoption (#8131) of #3996!
All I've done is updated the branch and run the docs CI.
> **Note:** This is an adoption of #3996, originally authored by
@molikto
>
> # Objective
> Allow use of `wgpu::Features::SPIRV_SHADER_PASSTHROUGH` and the
corresponding `wgpu::Device::create_shader_module_spirv` for SPIR-V
shader assets.
>
> This enables use-cases where naga is not sufficient to load a given
(valid) SPIR-V module, i.e. cases where naga lacks support for a given
SPIR-V feature employed by a third-party codegen backend like
`rust-gpu`.
>
> ## Solution
> * Reimplemented the changes from [Spirv shader
bypass #3996](https://github.com/bevyengine/bevy/pull/3996), on account
of the original branch having been deleted.
> * Documented the new `spirv_shader_passthrough` feature flag with the
appropriate platform support context from [wgpu's
documentation](https://docs.rs/wgpu/latest/wgpu/struct.Features.html#associatedconstant.SPIRV_SHADER_PASSTHROUGH).
>
> ## Changelog
> * Adds a `spirv_shader_passthrough` feature flag to the following
crates:
>
> * `bevy`
> * `bevy_internal`
> * `bevy_render`
> * Extends `RenderDevice::create_shader_module` with a conditional call
to `wgpu::Device::create_shader_module_spirv` if
`spirv_shader_passthrough` is enabled and
`wgpu::Features::SPIRV_SHADER_PASSTHROUGH` is present for the current
platform.
> * Documents the relevant `wgpu` platform support in
`docs/cargo_features.md`
---------
Co-authored-by: Josh Palmer <1253239+Shfty@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- A utilities module is considered to be a bad practice and poor
organization of code, so this fixes it.
## Solution
- Split each struct into its own module
- Move related lose functions into their own module
- Move the last few bits into good places
## Testing
- CI
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
While #13152 added function reflection, it didn't really make functions
reflectable. Instead, it made it so that they can be called with
reflected arguments and return reflected data. But functions themselves
cannot be reflected.
In other words, we can't go from `DynamicFunction` to `dyn
PartialReflect`.
## Solution
Allow `DynamicFunction` to actually be reflected.
This PR adds the `Function` reflection subtrait (and corresponding
`ReflectRef`, `ReflectKind`, etc.). With this new trait, we're able to
implement `PartialReflect` on `DynamicFunction`.
### Implementors
`Function` is currently only implemented for `DynamicFunction<'static>`.
This is because we can't implement it generically over all
functions—even those that implement `IntoFunction`.
What about `DynamicFunctionMut`? Well, this PR does **not** implement
`Function` for `DynamicFunctionMut`.
The reasons for this are a little complicated, but it boils down to
mutability. `DynamicFunctionMut` requires `&mut self` to be invoked
since it wraps a `FnMut`. However, we can't really model this well with
`Function`. And if we make `DynamicFunctionMut` wrap its internal
`FnMut` in a `Mutex` to allow for `&self` invocations, then we run into
either concurrency issues or recursion issues (or, in the worst case,
both).
So for the time-being, we won't implement `Function` for
`DynamicFunctionMut`. It will be better to evaluate it on its own. And
we may even consider the possibility of removing it altogether if it
adds too much complexity to the crate.
### Dynamic vs Concrete
One of the issues with `DynamicFunction` is the fact that it's both a
dynamic representation (like `DynamicStruct` or `DynamicList`) and the
only way to represent a function.
Because of this, it's in a weird middle ground where we can't easily
implement full-on `Reflect`. That would require `Typed`, but what static
`TypeInfo` could it provide? Just that it's a `DynamicFunction`? None of
the other dynamic types implement `Typed`.
However, by not implementing `Reflect`, we lose the ability to downcast
back to our `DynamicStruct`. Our only option is to call
`Function::clone_dynamic`, which clones the data rather than by simply
downcasting. This works in favor of the `PartialReflect::try_apply`
implementation since it would have to clone anyways, but is definitely
not ideal. This is also the reason I had to add `Debug` as a supertrait
on `Function`.
For now, this PR chooses not to implement `Reflect` for
`DynamicFunction`. We may want to explore this in a followup PR (or even
this one if people feel strongly that it's strictly required).
The same is true for `FromReflect`. We may decide to add an
implementation there as well, but it's likely out-of-scope of this PR.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Showcase
You can now pass around a `DynamicFunction` as a `dyn PartialReflect`!
This also means you can use it as a field on a reflected type without
having to ignore it (though you do need to opt out of `FromReflect`).
```rust
#[derive(Reflect)]
#[reflect(from_reflect = false)]
struct ClickEvent {
callback: DynamicFunction<'static>,
}
let event: Box<dyn Struct> = Box::new(ClickEvent {
callback: (|| println!("Clicked!")).into_function(),
});
// We can access our `DynamicFunction` as a `dyn PartialReflect`
let callback: &dyn PartialReflect = event.field("callback").unwrap();
// And access function-related methods via the new `Function` trait
let ReflectRef::Function(callback) = callback.reflect_ref() else {
unreachable!()
};
// Including calling the function
callback.reflect_call(ArgList::new()).unwrap(); // Prints: Clicked!
```
# Objective
Add examples for manipulating sprites and meshes by either mutating the
handle or direct manipulation of the asset, as described in #15056.
Closes#3130.
(The previous PR suffered a Git-tastrophe, and was unceremoniously
closed, sry! 😅 )
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
- Goal is to minimize bevy_utils #11478
## Solution
- Move the file short_name wholesale into bevy_reflect
## Testing
- Unit tests
- CI
## Migration Guide
- References to `bevy_utils::ShortName` should instead now be
`bevy_reflect::ShortName`.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Closes#11825
## Solution
Change return type of `get_resource_ref` and `resource_ref` from `Res`
to `Ref` and implement `From Res<T> for Ref<T>`.
# Objective
Fixes#15330
## Solution
1. Add an `ExtractTextureSlice` variant to `RenderUiSystem`.
2. Add `RenderUiSystem::ExtractTextureSlice` to the `ExtractSchedule`
between `ExtractImages` and `ExtractBorders`.
3. Add `extract_ui_texture_slices` to the new `ExtractTextureSlice`
system set.
Which results in texture slice nodes being extracted before borders. No
more z-fighting, borders will always be drawn on top of texture-sliced
images.
# Objective
> Rust 1.81 released the #[expect(...)] attribute, which works like
#[allow(...)] but throws a warning if the lint isn't raised. This is
preferred to #[allow(...)] because it tells us when it can be removed.
- Adopts the parts of #15118 that are complete, and updates the branch
so it can be merged.
- There were a few conflicts, let me know if I misjudged any of 'em.
Alice's
[recommendation](https://github.com/bevyengine/bevy/issues/15059#issuecomment-2349263900)
seems well-taken, let's do this crate by crate now that @BD103 has done
the lion's share of this!
(Relates to, but doesn't yet completely finish #15059.)
Crates this _doesn't_ cover:
- bevy_input
- bevy_gilrs
- bevy_window
- bevy_winit
- bevy_state
- bevy_render
- bevy_picking
- bevy_core_pipeline
- bevy_sprite
- bevy_text
- bevy_pbr
- bevy_ui
- bevy_gltf
- bevy_gizmos
- bevy_dev_tools
- bevy_internal
- bevy_dylib
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Ben Frankel <ben.frankel7@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
# Objective
There may be times where a function in the `FunctionRegistry` doesn't
need to be fully retrieved. A user may just need to call it with a set
of arguments.
We should provide a shortcut for doing this.
## Solution
Add the `FunctionRegistry::call` method to directly call a function in
the registry with the given name and arguments.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
No hard feelings if you don't want to make this change. This is just
something I stumbled over in my very first read of the `bevy_ecs` crate.
# Objective
- the general goal here is to improve DX slightly
- make the code easier to read in general. The previous names make the
code harder to read, especially since they are so similar.
## Solution
- choose more specific names for the fields
- `index_iter` -> `freelist_indices` : "freelist" is a well established
term in the rest of the docs in this module, so we might want to reuse
it
- `index_range` -> `new_indices` : Nothing besides the doc comment
stated that these indices were actually new/fresh
## Testing
Note that the fields are private so that this is no breaking change.
They are also only used in this one module.
# Objective
- Fixes#15319
- Fixes#15317
## Solution
- Updated CI task to check for _any_ `bevy_*` crates, rather than just
`bevy_internal`
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- Intended to resolve https://github.com/bevyengine/bevy/issues/15290.
- Fix four duplicate `DragEnd` firing when drag finished.
- Fix redundant `DragStart` firing when dragging across pick-able
entities.
- Fix `Click` coming after `Drop` and obliterating finished drag
interactions.
Big thanks to B. Reinhart for testing picking in their codebase and
identifying these issues early.
## Solution
- Fix press & drag state being cleared after the first entity is read
from the hover map on pointer release, rather than after all entities
are read. This caused only the first hovered entity to receive `Up` and
`Click` events.
- Fixes `Down` being determined using the `previous_hover_map` rather
than `hover_map`, a regression compared to `bevy_mod_picking`. I think
this is what was messing up drag events.
- Fixes and issue where `PointerEnd` would fire multiple times and
`PointerStart` would fire when dragging onto a new entity.
- Re-orders events to make them easier to handle. `Out` now fired before
`DragLeave` and `Click/Up` now fire before `DragDrop`.
- Generally refactors the picking event code to be more clean and sane.
## Testing
These changes are currently sporadically tested.
# Objective
- Remove an int2ptr cast in `bevy_ptr::dangling_with_align`
- This is flagged by MIRI unless `-Zmiri-permissive-provenance` is used
(like in CI)
- Remove `-Zmiri-permissive-provenance` in CI
## Solution
- Create the raw pointer like
[`std::ptr::without_provenance`](https://doc.rust-lang.org/stable/std/ptr/fn.without_provenance_mut.html)
does, i.e. by starting from a null pointer.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- The multithreaded executor has some weird UB related to stacked
borrows and async blocks
- See my explanation on discord
https://discord.com/channels/691052431525675048/749335865876021248/1286359267921887232
- Closes#15296 (can this be used to close PRs?)
## Solution
- Don't create a `&mut World` reference outside `async` blocks and then
capture it, but instead directly create it inside the `async` blocks.
This avoids it being captured, which has some weird requirement on its
validity.
## Testing
- Added a regression test
Added a `HeadlessPlugins` plugin group, that adds more default
functionality (like logging) than the `MinimumPlugins`. Fixes#15203
Changed the headless example to use the new plugin group.
I am not entirely sure if the list of plugins is correct. Are there ones
that should be added / removed?
----
The `TerminalCtrlCHandlerPlugin` has interesting effects in the headless
example: Installing it a second time it will give a log message about
skipping installation, because it is already installed. Ctrl+C will
terminate the application in that case. However, _not_ installing it the
second time (so only on the app that runs once) has the effect that the
app that runs continuously cannot be stopped using Ctrl+C.
This implies that, even though the second app did not install the Ctrl+C
handler, it did _something_ because it was keeping the one from the
first app alive.
Not sure if this is a problem or issue, or can be labeled a wierd quirk
of having multiple Apps in one executable.
# Objective
- I was running miri locally to check the UB in #15276 and it detected
an unrelated memory leak, due to the `RawCommandQueue` changes. (I
probably should have turned the leak detection off because we do
purposely leak interned string labels and I assume that's why CI didn't
detect it.)
## Solution
- The memory allocated to `RawCommandQueue` needs to be manually
dropped. This was being done for `bytes` and `cursor`, but was missed
for `panic_recovery`.
## Testing
- Ran miri locally and the related memory leaks errors when away.
`ShortName` is lazily evaluated and does not allocate, instead providing
`Display` and `Debug` implementations which write directly to a
formatter using the original algorithm. When using `ShortName` in format
strings (`panic`, `dbg`, `format`, etc.) you can directly use the
`ShortName` type. If you require a `String`, simply call
`ShortName(...).to_string()`.
# Objective
- Remove the requirement for allocation when using `get_short_name`
## Solution
- Added new type `ShortName` which wraps a name and provides its own
`Debug` and `Display` implementations, using the original
`get_short_name` algorithm without the need for allocating.
- Removed `get_short_name`, as `ShortName(...)` is more performant and
ergonomic.
- Added `ShortName::of::<T>` method to streamline the common use-case
for name shortening.
## Testing
- CI
## Migration Guide
### For `format!`, `dbg!`, `panic!`, etc.
```rust
// Before
panic!("{} is too short!", get_short_name(name));
// After
panic!("{} is too short!", ShortName(name));
```
### Need a `String` Value
```rust
// Before
let short: String = get_short_name(name);
// After
let short: String = ShortName(name).to_string();
```
## Notes
`ShortName` lazily evaluates, and directly writes to a formatter via
`Debug` and `Display`, which removes the need to allocate a `String`
when printing a shortened type name. Because the implementation has been
moved into the `fmt` method, repeated printing of the `ShortName` type
may be less performant than converting it into a `String`. However, no
instances of this are present in Bevy, and the user can get the original
behaviour by calling `.to_string()` at no extra cost.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
It's convenient to be able to modify a component if it exist, and insert
a default value if it doesn't. You can already do most of this with
`EntityCommands::insert_if_new`, and all of this using a custom command.
However, that does not spark joy in my opinion.
Closes#10669
## Solution
Introduce a new commands type `EntityEntryCommands`, along with a method
to access it, `EntityCommands::entry`.
`EntityEntryCommands` exposes a subset of the entry API (`and_modify`,
`or_insert`, etc), however it's not an enum so it doesn't allow pattern
matching. Also, `or_insert` won't return the component because it's all
based on commands.
## Testing
Added a new test `entity_commands_entry`.
---
## Showcase
```rust
commands
.entity(player)
.entry::<Level>()
.and_modify(|mut lvl| lvl.0 += 1)
.or_default();
```
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
[*Percentage-closer soft shadows*] are a technique from 2004 that allow
shadows to become blurrier farther from the objects that cast them. It
works by introducing a *blocker search* step that runs before the normal
shadow map sampling. The blocker search step detects the difference
between the depth of the fragment being rasterized and the depth of the
nearby samples in the depth buffer. Larger depth differences result in a
larger penumbra and therefore a blurrier shadow.
To enable PCSS, fill in the `soft_shadow_size` value in
`DirectionalLight`, `PointLight`, or `SpotLight`, as appropriate. This
shadow size value represents the size of the light and should be tuned
as appropriate for your scene. Higher values result in a wider penumbra
(i.e. blurrier shadows).
When using PCSS, temporal shadow maps
(`ShadowFilteringMethod::Temporal`) are recommended. If you don't use
`ShadowFilteringMethod::Temporal` and instead use
`ShadowFilteringMethod::Gaussian`, Bevy will use the same technique as
`Temporal`, but the result won't vary over time. This produces a rather
noisy result. Doing better would likely require downsampling the shadow
map, which would be complex and slower (and would require PR #13003 to
land first).
In addition to PCSS, this commit makes the near Z plane for the shadow
map configurable on a per-light basis. Previously, it had been hardcoded
to 0.1 meters. This change was necessary to make the point light shadow
map in the example look reasonable, as otherwise the shadows appeared
far too aliased.
A new example, `pcss`, has been added. It demonstrates the
percentage-closer soft shadow technique with directional lights, point
lights, spot lights, non-temporal operation, and temporal operation. The
assets are my original work.
Both temporal and non-temporal shadows are rather noisy in the example,
and, as mentioned before, this is unavoidable without downsampling the
depth buffer, which we can't do yet. Note also that the shadows don't
look particularly great for point lights; the example simply isn't an
ideal scene for them. Nevertheless, I felt that the benefits of the
ability to do a side-by-side comparison of directional and point lights
outweighed the unsightliness of the point light shadows in that example,
so I kept the point light feature in.
Fixes#3631.
[*Percentage-closer soft shadows*]:
https://developer.download.nvidia.com/shaderlibrary/docs/shadow_PCSS.pdf
## Changelog
### Added
* Percentage-closer soft shadows (PCSS) are now supported, allowing
shadows to become blurrier as they stretch away from objects. To use
them, set the `soft_shadow_size` field in `DirectionalLight`,
`PointLight`, or `SpotLight`, as applicable.
* The near Z value for shadow maps is now customizable via the
`shadow_map_near_z` field in `DirectionalLight`, `PointLight`, and
`SpotLight`.
## Screenshots
PCSS off:
PCSS on:
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
# Objective
- Adjust `bevy_utils` to make it `no_std` compatible
- Partially replaces #6581
- Contributes to #8161
- Contributes to #6370
## Solution
Added `alloc` and `std` features to `bevy_utils` (`std` is enabled by
default), allowing the crate's use in `no_std` contexts.
## Testing
- CI passed locally.
- Used `bevy_utils` in a `no_std` crate as an experiment and compiled
successfully.
## Migration Guide
If you were importing `bevy_utils` and setting `default_features` to
`false`, but relying on elements which are now gated behind the `std` or
`alloc` features, include the relevant feature in your `Cargo.toml`.
## Notes
- Bevy already includes a single `no_std` crate, `bevy_ptr`, so there is
precedent for this change.
- As `bevy_utils` is widely used across the rest of Bevy, further work
to make Bevy `no_std` compatible would be blocked on this crate, if such
work was to be undertaken.
- Most of the changes in this PR are just the removal of an unnecessary
call to `to_string()` within unit tests.
Enabled `check-private-items` in `clippy.toml` and then fixed the
resulting errors. Most of these were simply misformatted and of the
remaining:
- ~Added `#[allow(clippy::missing_safety_doc)]` to~ Removed unsafe from
a pair of functions in `bevy_utils/futures` which are only unsafe so
that they can be passed to a function which requires `unsafe fn`
- Removed `unsafe` from `UnsafeWorldCell::observers` as from what I can
tell it is always safe like `components`, `bundles` etc. (this should be
checked)
- Added safety docs to:
- `Bundles::get_storage_unchecked`: Based on the function that writes to
`dynamic_component_storages`
- `Bundles::get_storages_unchecked`: Based on the function that writes
to `dynamic_bundle_storages`
- `QueryIterationCursor::init_empty`: Duplicated from `init`
- `QueryIterationCursor::peek_last`: Thanks Giooschi (also added
internal unsafe blocks)
- `tests::drop_ptr`: Moved safety comment out to the doc string
This lint would also apply to `missing_errors_doc`, `missing_panics_doc`
and `unnecessary_safety_doc` if we chose to enable any of those at some
point, although there is an open
[issue](https://github.com/rust-lang/rust-clippy/issues/13074) to
separate these options.
# Objective
Make it clear to the user why their program is failing rather than
having an unhelpful `called Option::unwrap() on a None value` message.
## Solution
Change the `unwrap()` calls to `expect()` calls, mirroring previously
implemented error messages.
## Testing
I have not tested these changes, but they are fairly trivial so I do not
necessarily feel they need it.
# Objective
When deriving `Reflect`, users will notice that their generic arguments
also need to implement `Reflect`:
```rust
#[derive(Reflect)]
struct Foo<T: Reflect> {
value: T
}
```
This works well for now. However, as we want to do more with `Reflect`,
these bounds might need to change. For example, to get #4154 working, we
likely need to enforce the `GetTypeRegistration` trait. So now we have:
```rust
#[derive(Reflect)]
struct Foo<T: Reflect + GetTypeRegistration> {
value: T
}
```
Not great, but not horrible. However, we might then want to do something
as suggested in
[this](https://github.com/bevyengine/bevy/issues/5745#issuecomment-1221389131)
comment and add a `ReflectTypeName` trait for stable type name support.
Well now we have:
```rust
#[derive(Reflect)]
struct Foo<T: Reflect + GetTypeRegistration + ReflectTypeName> {
value: T
}
```
Now imagine that for even two or three generic types. Yikes!
As the API changes it would be nice if users didn't need to manually
migrate their generic type bounds like this.
A lot of these traits are (or will/might be) core to the entire
reflection API. And although `Reflect` can't add them as supertraits for
object-safety reasons, they are still indirectly required for things to
function properly (manual implementors will know how easy it is to
forget to implement `GetTypeRegistration`). And they should all be
automatically implemented for user types anyways as long they're using
`#[derive(Reflect)]`.
## Solution
Add a "catch-all" trait called `Reflectable` whose supertraits are a
select handful of core reflection traits.
This allows us to consolidate all the examples above into this:
```rust
#[derive(Reflect)]
struct Foo<T: Reflectable> {
value: T
}
```
And as we experiment with the API, users can rest easy knowing they
don't need to migrate dozens upon dozens of types. It should all be
automatic!
## Discussion
1. Thoughts on the name `Reflectable`? Is it too easily confused with
`Reflect`? Or does it at least accurately describe that this contains
the core traits? If not, maybe `BaseReflect`?
---
## Changelog
- Added the `Reflectable` trait
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#15258
## Solution
If my understanding is correct, sprites with NaN anywhere in their
transform won't even get onto the screen, so should not generate pick
events. This PR filters sprites with NaN in their transforms before
sorting by depth, then uses `FloatOrd` to simplify the comparison. Since
we're guaranteed to not have NaN values, it's technically unnecessary,
and we could instead sort with `a.partial_cmp(&b).unwrap()`, or even
`unwrap_unchecked()`.
## Testing
I ran the picking example to ensure Z sorting was working as intended.
# Objective
Asset processing (added as part of #8624) is a powerful, high-impact
feature, but has been widely underused (and underdeveloped) due to poor
developer understanding.
## Solution
In this PR, I've documented what asset processing is, why it's useful,
and pointed users to the two primary entry points.
While I would like substantially more involved practical examples for
how to perform common asset-processing tasks, I've split them out from
this PR for ease of review (and actually submitting this for review
before the weekend).
We should add bread crumbs from the module docs to these docs, but
whether we add that here or in #15056 depends on which gets merged
first.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
