# Objective
Bevy seems to want to standardize on "American English" spellings. Not
sure if this is laid out anywhere in writing, but see also #15947.
While perusing the docs for `typos`, I noticed that it has a `locale`
config option and tried it out.
## Solution
Switch to `en-us` locale in the `typos` config and run `typos -w`
## Migration Guide
The following methods or fields have been renamed from `*dependants*` to
`*dependents*`.
- `ProcessorAssetInfo::dependants`
- `ProcessorAssetInfos::add_dependant`
- `ProcessorAssetInfos::non_existent_dependants`
- `AssetInfo::dependants_waiting_on_load`
- `AssetInfo::dependants_waiting_on_recursive_dep_load`
- `AssetInfos::loader_dependants`
- `AssetInfos::remove_dependants_and_labels`
# Objective
Fixes#15791.
As raised in #11022, scaling orthographic cameras is confusing! In Bevy
0.14, there were multiple completely redundant ways to do this, and no
clear guidance on which to use.
As a result, #15075 removed the `scale` field from
`OrthographicProjection` completely, solving the redundancy issue.
However, this resulted in an unintuitive API and a painful migration, as
discussed in #15791. Users simply want to change a single parameter to
zoom, rather than deal with the irrelevant details of how the camera is
being scaled.
## Solution
This PR reverts #15075, and takes an alternate, more nuanced approach to
the redundancy problem. `ScalingMode::WindowSize` was by far the biggest
offender. This was the default variant, and stored a float that was
*fully* redundant to setting `scale`.
All of the other variants contained meaningful semantic information and
had an intuitive scale. I could have made these unitless, storing an
aspect ratio, but this would have been a worse API and resulted in a
pointlessly painful migration.
In the course of this work I've also:
- improved the documentation to explain that you should just set `scale`
to zoom cameras
- swapped to named fields for all of the variants in `ScalingMode` for
more clarity about the parameter meanings
- substantially improved the `projection_zoom` example
- removed the footgunny `Mul` and `Div` impls for `ScalingMode`,
especially since these no longer have the intended effect on
`ScalingMode::WindowSize`.
- removed a rounding step because this is now redundant 🎉
## Testing
I've tested these changes as part of my work in the `projection_zoom`
example, and things seem to work fine.
## Migration Guide
`ScalingMode` has been refactored for clarity, especially on how to zoom
orthographic cameras and their projections:
- `ScalingMode::WindowSize` no longer stores a float, and acts as if its
value was 1. Divide your camera's scale by any previous value to achieve
identical results.
- `ScalingMode::FixedVertical` and `FixedHorizontal` now use named
fields.
---------
Co-authored-by: MiniaczQ <xnetroidpl@gmail.com>
# Objective
The type `AssetLoadError` has `PartialEq` and `Eq` impls, which is
problematic due to the fact that the `AssetLoaderError` and
`AddAsyncError` variants lie in their impls: they will return `true` for
any `Box<dyn Error>` with the same `TypeId`, even if the actual value is
different. This can lead to subtle bugs if a user relies on the equality
comparison to ensure that two values are equal.
The same is true for `DependencyLoadState`,
`RecursiveDependencyLoadState`.
More generally, it is an anti-pattern for large error types involving
dynamic dispatch, such as `AssetLoadError`, to have equality
comparisons. Directly comparing two errors for equality is usually not
desired -- if some logic needs to branch based on the value of an error,
it is usually more correct to check for specific variants and inspect
their fields.
As far as I can tell, the only reason these errors have equality
comparisons is because the `LoadState` enum wraps `AssetLoadError` for
its `Failed` variant. This equality comparison is only used to check for
`== LoadState::Loaded`, which we can easily replace with an `is_loaded`
method.
## Solution
Remove the `{Partial}Eq` impls from `LoadState`, which also allows us to
remove it from the error types.
## Migration Guide
The types `bevy_asset::AssetLoadError` and `bevy_asset::LoadState` no
longer support equality comparisons. If you need to check for an asset's
load state, consider checking for a specific variant using
`LoadState::is_loaded` or the `matches!` macro. Similarly, consider
using the `matches!` macro to check for specific variants of the
`AssetLoadError` type if you need to inspect the value of an asset load
error in your code.
`DependencyLoadState` and `RecursiveDependencyLoadState` are not
released yet, so no migration needed,
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
- Required components replace bundles, but `SpatialBundle` is yet to be
deprecated
## Solution
- Deprecate `SpatialBundle`
- Insert `Transform` and `Visibility` instead in examples using it
- In `spawn` or `insert` inserting a default `Transform` or `Visibility`
with component already requiring either, remove those components from
the tuple
## Testing
- Did you test these changes? If so, how?
Yes, I ran the examples I changed and tests
- Are there any parts that need more testing?
The `gamepad_viewer` and and `custom_shader_instancing` examples don't
work as intended due to entirely unrelated code, didn't check main.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Run examples, or just check that all spawned values are identical
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Linux, wayland trough x11 (cause that's the default feature)
---
## Migration Guide
`SpatialBundle` is now deprecated, insert `Transform` and `Visibility`
instead which will automatically insert all other components that were
in the bundle. If you do not specify these values and any other
components in your `spawn`/`insert` call already requires either of
these components you can leave that one out.
before:
```rust
commands.spawn(SpatialBundle::default());
```
after:
```rust
commands.spawn((Transform::default(), Visibility::default());
```
# Objective
- Closes#15716
- Closes#15718
## Solution
- Replace `Handle<MeshletMesh>` with a new `MeshletMesh3d` component
- As expected there were some random things that needed fixing:
- A couple tests were storing handles just to prevent them from being
dropped I believe, which seems to have been unnecessary in some.
- The `SpriteBundle` still had a `Handle<Image>` field. I've removed
this.
- Tests in `bevy_sprite` incorrectly added a `Handle<Image>` field
outside of the `Sprite` component.
- A few examples were still inserting `Handle`s, switched those to their
corresponding wrappers.
- 2 examples that were still querying for `Handle<Image>` were changed
to query `Sprite`
## Testing
- I've verified that the changed example work now
## Migration Guide
`Handle` can no longer be used as a `Component`. All existing Bevy types
using this pattern have been wrapped in their own semantically
meaningful type. You should do the same for any custom `Handle`
components your project needs.
The `Handle<MeshletMesh>` component is now `MeshletMesh3d`.
The `WithMeshletMesh` type alias has been removed. Use
`With<MeshletMesh3d>` instead.
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
A step in the migration to required components: scenes!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2FPJtNGVMMQhyM0zIvCJSkbA):
- Deprecate `SceneBundle` and `DynamicSceneBundle`.
- Add `SceneRoot` and `DynamicSceneRoot` components, which wrap a
`Handle<Scene>` and `Handle<DynamicScene>` respectively.
## Migration Guide
Asset handles for scenes and dynamic scenes must now be wrapped in the
`SceneRoot` and `DynamicSceneRoot` components. Raw handles as components
no longer spawn scenes.
Additionally, `SceneBundle` and `DynamicSceneBundle` have been
deprecated. Instead, use the scene components directly.
Previously:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn(SceneBundle {
scene: model_scene,
transform: Transform::from_xyz(-4.0, 0.0, -3.0),
..default()
});
```
Now:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn((
SceneRoot(model_scene),
Transform::from_xyz(-4.0, 0.0, -3.0),
));
```
# Objective
A big step in the migration to required components: meshes and
materials!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ):
- Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle`.
- Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`.
- Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`,
which wrap a `Handle<M>`.
- Meshes *without* a mesh material should be rendered with a default
material. The existence of a material is determined by
`HasMaterial2d`/`HasMaterial3d`, which is required by
`MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the
generics.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, previously nothing was rendered. Now,
it renders a white default `ColorMaterial` in 2D and a
`StandardMaterial` in 3D (this can be overridden). Below, only every
other entity has a material:
Why white? This is still open for discussion, but I think white makes
sense for a *default* material, while *invalid* asset handles pointing
to nothing should have something like a pink material to indicate that
something is broken (I don't handle that in this PR yet). This is kind
of a mix of Godot and Unity: Godot just renders a white material for
non-existent materials, while Unity renders nothing when no materials
exist, but renders pink for invalid materials. I can also change the
default material to pink if that is preferable though.
## Testing
I ran some 2D and 3D examples to test if anything changed visually. I
have not tested all examples or features yet however. If anyone wants to
test more extensively, it would be appreciated!
## Implementation Notes
- The relationship between `bevy_render` and `bevy_pbr` is weird here.
`bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all
of the material logic, and `bevy_render` doesn't depend on it. I feel
like the two crates should be refactored in some way, but I think that's
out of scope for this PR.
- I didn't migrate meshlets to required components yet. That can
probably be done in a follow-up, as this is already a huge PR.
- It is becoming increasingly clear to me that we really, *really* want
to disallow raw asset handles as components. They caused me a *ton* of
headache here already, and it took me a long time to find every place
that queried for them or inserted them directly on entities, since there
were no compiler errors for it. If we don't remove the `Component`
derive, I expect raw asset handles to be a *huge* footgun for users as
we transition to wrapper components, especially as handles as components
have been the norm so far. I personally consider this to be a blocker
for 0.15: we need to migrate to wrapper components for asset handles
everywhere, and remove the `Component` derive. Also see
https://github.com/bevyengine/bevy/issues/14124.
---
## Migration Guide
Asset handles for meshes and mesh materials must now be wrapped in the
`Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d`
components for 2D and 3D respectively. Raw handles as components no
longer render meshes.
Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle` have been deprecated. Instead, use the mesh and material
components directly.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, a white default material is now used.
Previously, nothing was rendered if the material was missing.
The `WithMesh2d` and `WithMesh3d` query filter type aliases have also
been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`.
---------
Co-authored-by: Tim Blackbird <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Another step in the migration to required components: lights!
Note that this does not include `EnvironmentMapLight` or reflection
probes yet, because their API hasn't been fully chosen yet.
## Solution
As per the [selected
proposals](https://hackmd.io/@bevy/required_components/%2FLLnzwz9XTxiD7i2jiUXkJg):
- Deprecate `PointLightBundle` in favor of the `PointLight` component
- Deprecate `SpotLightBundle` in favor of the `PointLight` component
- Deprecate `DirectionalLightBundle` in favor of the `DirectionalLight`
component
## Testing
I ran some examples with lights.
---
## Migration Guide
`PointLightBundle`, `SpotLightBundle`, and `DirectionalLightBundle` have
been deprecated. Use the `PointLight`, `SpotLight`, and
`DirectionalLight` components instead. Adding them will now insert the
other components required by them automatically.
# Objective
Fixes#15541
A bunch of lifetimes were added during the Assets V2 rework, but after
moving to async traits in #12550 they can be elided. That PR mentions
that this might be the case, but apparently it wasn't followed up on at
the time.
~~I ended up grepping for `<'a` and finding a similar case in
`bevy_reflect` which I also fixed.~~ (edit: that one was needed
apparently)
Note that elided lifetimes are unstable in `impl Trait`. If that gets
stabilized then we can elide even more.
## Solution
Remove the extra lifetimes.
## Testing
Everything still compiles. If I have messed something up there is a
small risk that some user code stops compiling, but all the examples
still work at least.
---
## Migration Guide
The traits `AssetLoader`, `AssetSaver` and `Process` traits from
`bevy_asset` now use elided lifetimes. If you implement these then
remove the named lifetime.
# Objective
This PR extends and reworks the material from #15282 by allowing
arbitrary curves to be used by the animation system to animate arbitrary
properties. The goals of this work are to:
- Allow far greater flexibility in how animations are allowed to be
defined in order to be used with `bevy_animation`.
- Delegate responsibility over keyframe interpolation to `bevy_math` and
the `Curve` libraries and reduce reliance on keyframes in animation
definitions generally.
- Move away from allowing the glTF spec to completely define animations
on a mechanical level.
## Solution
### Overview
At a high level, curves have been incorporated into the animation system
using the `AnimationCurve` trait (closely related to what was
`Keyframes`). From the top down:
1. In `animate_targets`, animations are driven by `VariableCurve`, which
is now a thin wrapper around a `Box<dyn AnimationCurve>`.
2. `AnimationCurve` is something built out of a `Curve`, and it tells
the animation system how to use the curve's output to actually mutate
component properties. The trait looks like this:
```rust
/// A low-level trait that provides control over how curves are actually applied to entities
/// by the animation system.
///
/// Typically, this will not need to be implemented manually, since it is automatically
/// implemented by [`AnimatableCurve`] and other curves used by the animation system
/// (e.g. those that animate parts of transforms or morph weights). However, this can be
/// implemented manually when `AnimatableCurve` is not sufficiently expressive.
///
/// In many respects, this behaves like a type-erased form of [`Curve`], where the output
/// type of the curve is remembered only in the components that are mutated in the
/// implementation of [`apply`].
///
/// [`apply`]: AnimationCurve::apply
pub trait AnimationCurve: Reflect + Debug + Send + Sync {
/// Returns a boxed clone of this value.
fn clone_value(&self) -> Box<dyn AnimationCurve>;
/// The range of times for which this animation is defined.
fn domain(&self) -> Interval;
/// Write the value of sampling this curve at time `t` into `transform` or `entity`,
/// as appropriate, interpolating between the existing value and the sampled value
/// using the given `weight`.
fn apply<'a>(
&self,
t: f32,
transform: Option<Mut<'a, Transform>>,
entity: EntityMutExcept<'a, (Transform, AnimationPlayer, Handle<AnimationGraph>)>,
weight: f32,
) -> Result<(), AnimationEvaluationError>;
}
```
3. The conversion process from a `Curve` to an `AnimationCurve` involves
using wrappers which communicate the intent to animate a particular
property. For example, here is `TranslationCurve`, which wraps a
`Curve<Vec3>` and uses it to animate `Transform::translation`:
```rust
/// This type allows a curve valued in `Vec3` to become an [`AnimationCurve`] that animates
/// the translation component of a transform.
pub struct TranslationCurve<C>(pub C);
```
### Animatable Properties
The `AnimatableProperty` trait survives in the transition, and it can be
used to allow curves to animate arbitrary component properties. The
updated documentation for `AnimatableProperty` explains this process:
<details>
<summary>Expand AnimatableProperty example</summary
An `AnimatableProperty` is a value on a component that Bevy can animate.
You can implement this trait on a unit struct in order to support
animating
custom components other than transforms and morph weights. Use that type
in
conjunction with `AnimatableCurve` (and perhaps
`AnimatableKeyframeCurve`
to define the animation itself). For example, in order to animate font
size of a
text section from 24 pt. to 80 pt., you might use:
```rust
#[derive(Reflect)]
struct FontSizeProperty;
impl AnimatableProperty for FontSizeProperty {
type Component = Text;
type Property = f32;
fn get_mut(component: &mut Self::Component) -> Option<&mut Self::Property> {
Some(&mut component.sections.get_mut(0)?.style.font_size)
}
}
```
You can then create an `AnimationClip` to animate this property like so:
```rust
let mut animation_clip = AnimationClip::default();
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableKeyframeCurve::new(
[
(0.0, 24.0),
(1.0, 80.0),
]
)
.map(AnimatableCurve::<FontSizeProperty, _>::from_curve)
.expect("Failed to create font size curve")
);
```
Here, the use of `AnimatableKeyframeCurve` creates a curve out of the
given keyframe time-value
pairs, using the `Animatable` implementation of `f32` to interpolate
between them. The
invocation of `AnimatableCurve::from_curve` with `FontSizeProperty`
indicates that the `f32`
output from that curve is to be used to animate the font size of a
`Text` component (as
configured above).
</details>
### glTF Loading
glTF animations are now loaded into `Curve` types of various kinds,
depending on what is being animated and what interpolation mode is being
used. Those types get wrapped into and converted into `Box<dyn
AnimationCurve>` and shoved inside of a `VariableCurve` just like
everybody else.
### Morph Weights
There is an `IterableCurve` abstraction which allows sampling these from
a contiguous buffer without allocating. Its only reason for existing is
that Rust disallows you from naming function types, otherwise we would
just use `Curve` with an iterator output type. (The iterator involves
`Map`, and the name of the function type would have to be able to be
named, but it is not.)
A `WeightsCurve` adaptor turns an `IterableCurve` into an
`AnimationCurve`, so it behaves like everything else in that regard.
## Testing
Tested by running existing animation examples. Interpolation logic has
had additional tests added within the `Curve` API to replace the tests
in `bevy_animation`. Some kinds of out-of-bounds errors have become
impossible.
Performance testing on `many_foxes` (`animate_targets`) suggests that
performance is very similar to the existing implementation. Here are a
couple trace histograms across different runs (yellow is this branch,
red is main).
<img width="669" alt="Screenshot 2024-09-27 at 9 41 50 AM"
src="https://github.com/user-attachments/assets/5ba4e9ac-3aea-452e-aaf8-1492acc2d7fc">
<img width="673" alt="Screenshot 2024-09-27 at 9 45 18 AM"
src="https://github.com/user-attachments/assets/8982538b-04cf-46b5-97b2-164c6bc8162e">
---
## Migration Guide
Most user code that does not directly deal with `AnimationClip` and
`VariableCurve` will not need to be changed. On the other hand,
`VariableCurve` has been completely overhauled. If you were previously
defining animation curves in code using keyframes, you will need to
migrate that code to use curve constructors instead. For example, a
rotation animation defined using keyframes and added to an animation
clip like this:
```rust
animation_clip.add_curve_to_target(
animation_target_id,
VariableCurve {
keyframe_timestamps: vec![0.0, 1.0, 2.0, 3.0, 4.0],
keyframes: Keyframes::Rotation(vec![
Quat::IDENTITY,
Quat::from_axis_angle(Vec3::Y, PI / 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 3.),
Quat::IDENTITY,
]),
interpolation: Interpolation::Linear,
},
);
```
would now be added like this:
```rust
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableKeyframeCurve::new([0.0, 1.0, 2.0, 3.0, 4.0].into_iter().zip([
Quat::IDENTITY,
Quat::from_axis_angle(Vec3::Y, PI / 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 2.),
Quat::from_axis_angle(Vec3::Y, PI / 2. * 3.),
Quat::IDENTITY,
]))
.map(RotationCurve)
.expect("Failed to build rotation curve"),
);
```
Note that the interface of `AnimationClip::add_curve_to_target` has also
changed (as this example shows, if subtly), and now takes its curve
input as an `impl AnimationCurve`. If you need to add a `VariableCurve`
directly, a new method `add_variable_curve_to_target` accommodates that
(and serves as a one-to-one migration in this regard).
### For reviewers
The diff is pretty big, and the structure of some of the changes might
not be super-obvious:
- `keyframes.rs` became `animation_curves.rs`, and `AnimationCurve` is
based heavily on `Keyframes`, with the adaptors also largely following
suite.
- The Curve API adaptor structs were moved from `bevy_math::curve::mod`
into their own module `adaptors`. There are no functional changes to how
these adaptors work; this is just to make room for the specialized
reflection implementations since `mod.rs` was getting kind of cramped.
- The new module `gltf_curves` holds the additional curve constructions
that are needed by the glTF loader. Note that the loader uses a mix of
these and off-the-shelf `bevy_math` curve stuff.
- `animatable.rs` no longer holds logic related to keyframe
interpolation, which is now delegated to the existing abstractions in
`bevy_math::curve::cores`.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: aecsocket <43144841+aecsocket@users.noreply.github.com>
# Objective
- fixes https://github.com/bevyengine/bevy/issues/13473
## Solution
- When a single mesh is assigned multiple materials, it is divided into
several primitive nodes, with each primitive assigned a unique material.
Presently, these primitives are named using the format Mesh.index, which
complicates querying. To improve this, we can assign a specific name to
each primitive based on the material’s name, since each primitive
corresponds to one material exclusively.
## Testing
- I have included a simple example which shows how to query a material
and mesh part based on the new name component.
## Changelog
- adds `GltfMaterialName` component to the mesh entity of the gltf
primitive node.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#6370
- Closes#6581
## Solution
- Added the following lints to the workspace:
- `std_instead_of_core`
- `std_instead_of_alloc`
- `alloc_instead_of_core`
- Used `cargo +nightly fmt` with [item level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Item%5C%3A)
to split all `use` statements into single items.
- Used `cargo clippy --workspace --all-targets --all-features --fix
--allow-dirty` to _attempt_ to resolve the new linting issues, and
intervened where the lint was unable to resolve the issue automatically
(usually due to needing an `extern crate alloc;` statement in a crate
root).
- Manually removed certain uses of `std` where negative feature gating
prevented `--all-features` from finding the offending uses.
- Used `cargo +nightly fmt` with [crate level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Crate%5C%3A)
to re-merge all `use` statements matching Bevy's previous styling.
- Manually fixed cases where the `fmt` tool could not re-merge `use`
statements due to conditional compilation attributes.
## Testing
- Ran CI locally
## Migration Guide
The MSRV is now 1.81. Please update to this version or higher.
## Notes
- This is a _massive_ change to try and push through, which is why I've
outlined the semi-automatic steps I used to create this PR, in case this
fails and someone else tries again in the future.
- Making this change has no impact on user code, but does mean Bevy
contributors will be warned to use `core` and `alloc` instead of `std`
where possible.
- This lint is a critical first step towards investigating `no_std`
options for Bevy.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
`bevy_gltf` have an instance where `use bevy_animation` is not behind
`#[cfg(feature = "bevy_animation")]`.
This resulted in a compile error when the feature is not enabled:
`failed to resolve: use of undeclared crate or module 'bevy_animation'`.
## Solution
move this instance of `use bevy_animation` behind the `cfg` attribute.
## Testing
I no longer get the error when compiling without the feature.
Currently, Bevy restricts animation clips to animating
`Transform::translation`, `Transform::rotation`, `Transform::scale`, or
`MorphWeights`, which correspond to the properties that glTF can
animate. This is insufficient for many use cases such as animating UI,
as the UI layout systems expect to have exclusive control over UI
elements' `Transform`s and therefore the `Style` properties must be
animated instead.
This commit fixes this, allowing for `AnimationClip`s to animate
arbitrary properties. The `Keyframes` structure has been turned into a
low-level trait that can be implemented to achieve arbitrary animation
behavior. Along with `Keyframes`, this patch adds a higher-level trait,
`AnimatableProperty`, that simplifies the task of animating single
interpolable properties. Built-in `Keyframes` implementations exist for
translation, rotation, scale, and morph weights. For the most part, you
can migrate by simply changing your code from
`Keyframes::Translation(...)` to `TranslationKeyframes(...)`, and
likewise for rotation, scale, and morph weights.
An example `AnimatableProperty` implementation for the font size of a
text section follows:
#[derive(Reflect)]
struct FontSizeProperty;
impl AnimatableProperty for FontSizeProperty {
type Component = Text;
type Property = f32;
fn get_mut(component: &mut Self::Component) -> Option<&mut
Self::Property> {
Some(&mut component.sections.get_mut(0)?.style.font_size)
}
}
In order to keep this patch relatively small, this patch doesn't include
an implementation of `AnimatableProperty` on top of the reflection
system. That can be a follow-up.
This patch builds on top of the new `EntityMutExcept<>` type in order to
widen the `AnimationTarget` query to include write access to all
components. Because `EntityMutExcept<>` has some performance overhead
over an explicit query, we continue to explicitly query `Transform` in
order to avoid regressing the performance of skeletal animation, such as
the `many_foxes` benchmark. I've measured the performance of that
benchmark and have found no significant regressions.
A new example, `animated_ui`, has been added. This example shows how to
use Bevy's built-in animation infrastructure to animate font size and
color, which wasn't possible before this patch.
## Showcase
https://github.com/user-attachments/assets/1fa73492-a9ce-405a-a8f2-4aacd7f6dc97
## Migration Guide
* Animation keyframes are now an extensible trait, not an enum. Replace
`Keyframes::Translation(...)`, `Keyframes::Scale(...)`,
`Keyframes::Rotation(...)`, and `Keyframes::Weights(...)` with
`Box::new(TranslationKeyframes(...))`, `Box::new(ScaleKeyframes(...))`,
`Box::new(RotationKeyframes(...))`, and
`Box::new(MorphWeightsKeyframes(...))` respectively.
# Objective
Hello! I am adopting #11022 to resolve conflicts with `main`. tldr: this
removes `scale` in favour of `scaling_mode`. Please see the original PR
for explanation/discussion.
Also relates to #2580.
## Migration Guide
Replace all uses of `scale` with `scaling_mode`, keeping in mind that
`scale` is (was) a multiplier. For example, replace
```rust
scale: 2.0,
scaling_mode: ScalingMode::FixedHorizontal(4.0),
```
with
```rust
scaling_mode: ScalingMode::FixedHorizontal(8.0),
```
---------
Co-authored-by: Stepan Koltsov <stepan.koltsov@gmail.com>
Adopted PR from dmlary, all credit to them!
https://github.com/bevyengine/bevy/pull/9915
Original description:
# Objective
The default value for `near` in `OrthographicProjection` should be
different for 2d & 3d.
For 2d using `near = -1000` allows bevy users to build up scenes using
background `z = 0`, and foreground elements `z > 0` similar to css.
However in 3d `near = -1000` results in objects behind the camera being
rendered. Using `near = 0` works for 3d, but forces 2d users to assign
`z <= 0` for rendered elements, putting the background at some arbitrary
negative value.
There is no common value for `near` that doesn't result in a footgun or
usability issue for either 2d or 3d, so they should have separate
values.
There was discussion about other options in the discord
[0](https://discord.com/channels/691052431525675048/1154114310042292325),
but splitting `default()` into `default_2d()` and `default_3d()` seemed
like the lowest cost approach.
Related/past work https://github.com/bevyengine/bevy/issues/9138,
https://github.com/bevyengine/bevy/pull/9214,
https://github.com/bevyengine/bevy/pull/9310,
https://github.com/bevyengine/bevy/pull/9537 (thanks to @Selene-Amanita
for the list)
## Solution
This commit splits `OrthographicProjection::default` into `default_2d`
and `default_3d`.
## Migration Guide
- In initialization of `OrthographicProjection`, change `..default()` to
`..OrthographicProjection::default_2d()` or
`..OrthographicProjection::default_3d()`
Example:
```diff
--- a/examples/3d/orthographic.rs
+++ b/examples/3d/orthographic.rs
@@ -20,7 +20,7 @@ fn setup(
projection: OrthographicProjection {
scale: 3.0,
scaling_mode: ScalingMode::FixedVertical(2.0),
- ..default()
+ ..OrthographicProjection::default_3d()
}
.into(),
transform: Transform::from_xyz(5.0, 5.0, 5.0).looking_at(Vec3::ZERO, Vec3::Y),
```
---------
Co-authored-by: David M. Lary <dmlary@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
- Crate-level prelude modules, such as `bevy_ecs::prelude`, are plagued
with inconsistency! Let's fix it!
## Solution
Format all preludes based on the following rules:
1. All preludes should have brief documentation in the format of:
> The _name_ prelude.
>
> This includes the most common types in this crate, re-exported for
your convenience.
2. All documentation should be outer, not inner. (`///` instead of
`//!`.)
3. No prelude modules should be annotated with `#[doc(hidden)]`. (Items
within them may, though I'm not sure why this was done.)
## Testing
- I manually searched for the term `mod prelude` and updated all
occurrences by hand. 🫠
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Fixes#14782
## Solution
Enable the lint and fix all upcoming hints (`--fix`). Also tried to
figure out the false-positive (see review comment). Maybe split this PR
up into multiple parts where only the last one enables the lint, so some
can already be merged resulting in less many files touched / less
potential for merge conflicts?
Currently, there are some cases where it might be easier to read the
code with the qualifier, so perhaps remove the import of it and adapt
its cases? In the current stage it's just a plain adoption of the
suggestions in order to have a base to discuss.
## Testing
`cargo clippy` and `cargo run -p ci` are happy.
# Objective
Fixes#14365
## Migration Guide
- When using the iterator returned by `Mesh::attributes` or
`Mesh::attributes_mut` the first value of the tuple is not the
`MeshVertexAttribute` instead of `MeshVertexAttributeId`. To access the
`MeshVertexAttributeId` use the `MeshVertexAttribute.id` field.
Signed-off-by: Sarthak Singh <sarthak.singh99@gmail.com>
# Objective
- Make skin data of glTF meshes available for users, so it would be
possible to create skinned meshes without spawning a scene.
- I believe it contributes to
https://github.com/bevyengine/bevy/issues/13681 ?
## Solution
- Add a new `GltfSkin`, representing skin data from a glTF file, new
member `skin` to `GltfNode` and both `skins` + `named_skins` to `Gltf`
(a la meshes/nodes).
- Rewrite glTF nodes resolution as an iterator which sorts nodes by
their dependencies (nodes without dependencies first). So when we create
`GltfNodes` with their associated `GltfSkin` while iterating, their
dependencies already have been loaded.
- Make a distinction between `GltfSkin` and
`SkinnedMeshInverseBindposes` in assets: prior to this PR,
`GltfAssetLabel::Skin(n)` was responsible not for a skin, but for one of
skin's components. Now `GltfAssetLabel::InverseBindMatrices(n)` will map
to `SkinnedMeshInverseBindposes`, and `GltfAssetLabel::Skin(n)` will map
to `GltfSkin`.
## Testing
- New test `skin_node` does just that; it tests whether or not
`GltfSkin` was loaded properly.
## Migration Guide
- Change `GltfAssetLabel::Skin(..)` to
`GltfAssetLabel::InverseBindMatrices(..)`.
Due to a bug in `load_gltf`, the `GltfNode::children` links of each node
actually point to the node itself, rather than to the node's children.
This commit fixes that bug.
Note that this didn't affect the scene hierarchy of the instantiated
glTF, only the hierarchy as present in the `GltfNode` assets. This is
likely why the bug was never noticed until now.
# Objective
- `EmptyPathStream` is only used in android and wasm32
- This now makes rust nightly warn
## Solution
- flag the struct to only be present when needed
- also change how `MorphTargetNames` is used because that makes rust
happier?
# Objective
- Standard Material is starting to run out of samplers (currently uses
13 with no additional features off, I think in 0.13 it was 12).
- This change adds a new feature switch, modelled on the other ones
which add features to Standard Material, to turn off the new anisotropy
feature by default.
## Solution
- feature + texture define
## Testing
- Anisotropy example still works fine
- Other samples work fine
- Standard Material now takes 12 samplers by default on my Mac instead
of 13
## Migration Guide
- Add feature pbr_anisotropy_texture if you are using that texture in
any standard materials.
---------
Co-authored-by: John Payne <20407779+johngpayne@users.noreply.github.com>
# Objective
The `AssetReader` trait allows customizing the behavior of fetching
bytes for an `AssetPath`, and expects implementors to return `dyn
AsyncRead + AsyncSeek`. This gives implementors of `AssetLoader` great
flexibility to tightly integrate their asset loading behavior with the
asynchronous task system.
However, almost all implementors of `AssetLoader` don't use the async
functionality at all, and just call `AsyncReadExt::read_to_end(&mut
Vec<u8>)`. This is incredibly inefficient, as this method repeatedly
calls `poll_read` on the trait object, filling the vector 32 bytes at a
time. At my work we have assets that are hundreds of megabytes which
makes this a meaningful overhead.
## Solution
Turn the `Reader` type alias into an actual trait, with a provided
method `read_to_end`. This provided method should be more efficient than
the existing extension method, as the compiler will know the underlying
type of `Reader` when generating this function, which removes the
repeated dynamic dispatches and allows the compiler to make further
optimizations after inlining. Individual implementors are able to
override the provided implementation -- for simple asset readers that
just copy bytes from one buffer to another, this allows removing a large
amount of overhead from the provided implementation.
Now that `Reader` is an actual trait, I also improved the ergonomics for
implementing `AssetReader`. Currently, implementors are expected to box
their reader and return it as a trait object, which adds unnecessary
boilerplate to implementations. This PR changes that trait method to
return a pseudo trait alias, which allows implementors to return `impl
Reader` instead of `Box<dyn Reader>`. Now, the boilerplate for boxing
occurs in `ErasedAssetReader`.
## Testing
I made identical changes to my company's fork of bevy. Our app, which
makes heavy use of `read_to_end` for asset loading, still worked
properly after this. I am not aware if we have a more systematic way of
testing asset loading for correctness.
---
## Migration Guide
The trait method `bevy_asset::io::AssetReader::read` (and `read_meta`)
now return an opaque type instead of a boxed trait object. Implementors
of these methods should change the type signatures appropriately
```rust
impl AssetReader for MyReader {
// Before
async fn read<'a>(&'a self, path: &'a Path) -> Result<Box<Reader<'a>>, AssetReaderError> {
let reader = // construct a reader
Box::new(reader) as Box<Reader<'a>>
}
// After
async fn read<'a>(&'a self, path: &'a Path) -> Result<impl Reader + 'a, AssetReaderError> {
// create a reader
}
}
```
`bevy::asset::io::Reader` is now a trait, rather than a type alias for a
trait object. Implementors of `AssetLoader::load` will need to adjust
the method signature accordingly
```rust
impl AssetLoader for MyLoader {
async fn load<'a>(
&'a self,
// Before:
reader: &'a mut bevy::asset::io::Reader,
// After:
reader: &'a mut dyn bevy::asset::io::Reader,
_: &'a Self::Settings,
load_context: &'a mut LoadContext<'_>,
) -> Result<Self::Asset, Self::Error> {
}
```
Additionally, implementors of `AssetReader` that return a type
implementing `futures_io::AsyncRead` and `AsyncSeek` might need to
explicitly implement `bevy::asset::io::Reader` for that type.
```rust
impl bevy::asset::io::Reader for MyAsyncReadAndSeek {}
```
# Objective
The `BuildChildren` and `BuildWorldChildren` traits are mostly
identical, so I decided to try and merge them. I'm not sure of the
history, maybe they were added before GATs existed.
## Solution
- Add an associated type to `BuildChildren` which reflects the prior
differences between the `BuildChildren` and `BuildWorldChildren` traits.
- Add `ChildBuild` trait that is the bounds for
`BuildChildren::Builder`, with impls for `ChildBuilder` and
`WorldChildBuilder`.
- Remove `BuildWorldChildren` trait and replace it with an impl of
`BuildChildren` for `EntityWorldMut`.
## Testing
I ran several of the examples that use entity hierarchies, mainly UI.
---
## Changelog
n/a
## Migration Guide
n/a
Part of #13681
# Objective
gLTF Assets shouldn't be duplicated between Assets resource and node
children.
Also changed `asset_label` to be a method as [per previous PR
comment](https://github.com/bevyengine/bevy/pull/13558).
## Solution
- Made GltfNode children be Handles instead of asset copies.
## Testing
- Added tests that actually test loading and hierarchy as previous ones
unit tested only one function and that makes little sense.
- Made circular nodes an actual loading failure instead of a warning
no-op. You [_MUST NOT_ have cycles in
gLTF](https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html#nodes-and-hierarchy)
according to the spec.
- IMO this is a bugfix, not a breaking change. But in an extremely
unlikely event in which you relied on invalid behavior for loading gLTF
with cyclic children, you will not be able to do that anymore. You
should fix your gLTF file as it's not valid according to gLTF spec. For
it to for work someone, it had to be bevy with bevy_animation flag off.
---
## Changelog
### Changed
- `GltfNode.children` are now `Vec<Handle<GltfNode>>` instead of
`Vec<GltfNode>`
- Having children cycles between gLTF nodes in a gLTF document is now an
explicit asset loading failure.
## Migration Guide
If accessing children, use `Assets<GltfNode>` resource to get the actual
child object.
#### Before
```rs
fn gltf_print_first_node_children_system(gltf_component_query: Query<Handle<Gltf>>, gltf_assets: Res<Assets<Gltf>>, gltf_nodes: Res<Assets<GltfNode>>) {
for gltf_handle in gltf_component_query.iter() {
let gltf_root = gltf_assets.get(gltf_handle).unwrap();
let first_node_handle = gltf_root.nodes.get(0).unwrap();
let first_node = gltf_nodes.get(first_node_handle).unwrap();
let first_child = first_node.children.get(0).unwrap();
println!("First nodes child node name is {:?)", first_child.name);
}
}
```
#### After
```rs
fn gltf_print_first_node_children_system(gltf_component_query: Query<Handle<Gltf>>, gltf_assets: Res<Assets<Gltf>>, gltf_nodes: Res<Assets<GltfNode>>) {
for gltf_handle in gltf_component_query.iter() {
let gltf_root = gltf_assets.get(gltf_handle).unwrap();
let first_node_handle = gltf_root.nodes.get(0).unwrap();
let first_node = gltf_nodes.get(first_node_handle).unwrap();
let first_child_handle = first_node.children.get(0).unwrap();
let first_child = gltf_nodes.get(first_child_handle).unwrap();
println!("First nodes child node name is {:?)", first_child.name);
}
}
```
# Objective
Add labels to GltfNode and GltfMesh - they are missing from the assets
even though they are need if one wants to write a custom Gltf spawning
logic.
Eg AnimationPlayer relies on Name component of the node entities to
control the animation. There is no way to actually get names of the gltf
nodes, thus you can't manually spawn subtree from the scene and animate
it.
## Solution
- Add label field and make use of existing label creation logic to store
it there.
## Testing
- Ran all tests
- Fixed tests for node_hierarchy to use lable now
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
This commit implements support for physically-based anisotropy in Bevy's
`StandardMaterial`, following the specification for the
[`KHR_materials_anisotropy`] glTF extension.
[*Anisotropy*] (not to be confused with [anisotropic filtering]) is a
PBR feature that allows roughness to vary along the tangent and
bitangent directions of a mesh. In effect, this causes the specular
light to stretch out into lines instead of a round lobe. This is useful
for modeling brushed metal, hair, and similar surfaces. Support for
anisotropy is a common feature in major game and graphics engines;
Unity, Unreal, Godot, three.js, and Blender all support it to varying
degrees.
Two new parameters have been added to `StandardMaterial`:
`anisotropy_strength` and `anisotropy_rotation`. Anisotropy strength,
which ranges from 0 to 1, represents how much the roughness differs
between the tangent and the bitangent of the mesh. In effect, it
controls how stretched the specular highlight is. Anisotropy rotation
allows the roughness direction to differ from the tangent of the model.
In addition to these two fixed parameters, an *anisotropy texture* can
be supplied. Such a texture should be a 3-channel RGB texture, where the
red and green values specify a direction vector using the same
conventions as a normal map ([0, 1] color values map to [-1, 1] vector
values), and the the blue value represents the strength. This matches
the format that the [`KHR_materials_anisotropy`] specification requires.
Such textures should be loaded as linear and not sRGB. Note that this
texture does consume one additional texture binding in the standard
material shader.
The glTF loader has been updated to properly parse the
`KHR_materials_anisotropy` extension.
A new example, `anisotropy`, has been added. This example loads and
displays the barn lamp example from the [`glTF-Sample-Assets`]
repository. Note that the textures were rather large, so I shrunk them
down and converted them to a mixture of JPEG and KTX2 format, in the
interests of saving space in the Bevy repository.
[*Anisotropy*]:
https://google.github.io/filament/Filament.md.html#materialsystem/anisotropicmodel
[anisotropic filtering]:
https://en.wikipedia.org/wiki/Anisotropic_filtering
[`KHR_materials_anisotropy`]:
https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_anisotropy/README.md
[`glTF-Sample-Assets`]:
https://github.com/KhronosGroup/glTF-Sample-Assets/
## Changelog
### Added
* Physically-based anisotropy is now available for materials, which
enhances the look of surfaces such as brushed metal or hair. glTF scenes
can use the new feature with the `KHR_materials_anisotropy` extension.
## Screenshots
With anisotropy:
Without anisotropy:
# Objective
- Fixes#10909
- Fixes#8492
## Solution
- Name all matrices `x_from_y`, for example `world_from_view`.
## Testing
- I've tested most of the 3D examples. The `lighting` example
particularly should hit a lot of the changes and appears to run fine.
---
## Changelog
- Renamed matrices across the engine to follow a `y_from_x` naming,
making the space conversion more obvious.
## Migration Guide
- `Frustum`'s `from_view_projection`, `from_view_projection_custom_far`
and `from_view_projection_no_far` were renamed to
`from_clip_from_world`, `from_clip_from_world_custom_far` and
`from_clip_from_world_no_far`.
- `ComputedCameraValues::projection_matrix` was renamed to
`clip_from_view`.
- `CameraProjection::get_projection_matrix` was renamed to
`get_clip_from_view` (this affects implementations on `Projection`,
`PerspectiveProjection` and `OrthographicProjection`).
- `ViewRangefinder3d::from_view_matrix` was renamed to
`from_world_from_view`.
- `PreviousViewData`'s members were renamed to `view_from_world` and
`clip_from_world`.
- `ExtractedView`'s `projection`, `transform` and `view_projection` were
renamed to `clip_from_view`, `world_from_view` and `clip_from_world`.
- `ViewUniform`'s `view_proj`, `unjittered_view_proj`,
`inverse_view_proj`, `view`, `inverse_view`, `projection` and
`inverse_projection` were renamed to `clip_from_world`,
`unjittered_clip_from_world`, `world_from_clip`, `world_from_view`,
`view_from_world`, `clip_from_view` and `view_from_clip`.
- `GpuDirectionalCascade::view_projection` was renamed to
`clip_from_world`.
- `MeshTransforms`' `transform` and `previous_transform` were renamed to
`world_from_local` and `previous_world_from_local`.
- `MeshUniform`'s `transform`, `previous_transform`,
`inverse_transpose_model_a` and `inverse_transpose_model_b` were renamed
to `world_from_local`, `previous_world_from_local`,
`local_from_world_transpose_a` and `local_from_world_transpose_b` (the
`Mesh` type in WGSL mirrors this, however `transform` and
`previous_transform` were named `model` and `previous_model`).
- `Mesh2dTransforms::transform` was renamed to `world_from_local`.
- `Mesh2dUniform`'s `transform`, `inverse_transpose_model_a` and
`inverse_transpose_model_b` were renamed to `world_from_local`,
`local_from_world_transpose_a` and `local_from_world_transpose_b` (the
`Mesh2d` type in WGSL mirrors this).
- In WGSL, in `bevy_pbr::mesh_functions`, `get_model_matrix` and
`get_previous_model_matrix` were renamed to `get_world_from_local` and
`get_previous_world_from_local`.
- In WGSL, `bevy_sprite::mesh2d_functions::get_model_matrix` was renamed
to `get_world_from_local`.
# Objective
- fixes#4823
## Solution
As outlined in the discussion in the linked issue as the best current
solution, this PR adds specific GltfExtras for
- scenes
- meshes
- materials
- As it is , it is not a breaking change, I hesitated to rename the
current "GltfExtras" component to "PrimitiveGltfExtras", but that would
result in a breaking change and might be a bit confusing as to what
"primitive" that refers to.
## Testing
- I included a bare-bones example & asset (exported gltf file from
Blender) with gltf extras at all the relevant levels : scene, mesh,
material
---
## Changelog
- adds "SceneGltfExtras" injected at the scene level if any
- adds "MeshGltfExtras", injected at the mesh level if any
- adds "MaterialGltfExtras", injected at the mesh level if any: ie if a
mesh has a material that has gltf extras, the component will be injected
there.
# Objective
- Followup to #13548
- It added a list of all possible labels to documentation. This seems
hard to keep up and doesn't stop people from making spelling mistake
## Solution
- Add an enum that can create all the labels possible, and encourage its
use rather than manually typed labels
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- The Gltf loader has a ton of features to load parts of an asset that
are essentially undocumented.
## Solution
- Add some docs to explain some of those features
- The docs is definitely inspired by the bevy cheatbook page on the
subject but it goes in a lot less details
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- some gltf files are broken since #13333
```
thread 'IO Task Pool (2)' panicked at crates/bevy_render/src/mesh/mesh/mod.rs:581:9:
`compute_flat_normals` can't work on indexed geometry. Consider calling either `Mesh::compute_smooth_normals` or `Mesh::duplicate_vertices` followed by `Mesh::compute_flat_normals`.
```
- test with example `custom_gltf_vertex_attribute` or
`gltf_skinned_mesh`
## Solution
- Call the wrapper function for normals that will either call
`compute_flat_normals` or `compute_smooth_normals` as appropriate
## Testing
- Ran the two examples mentioned above
Clearcoat is a separate material layer that represents a thin
translucent layer of a material. Examples include (from the [Filament
spec]) car paint, soda cans, and lacquered wood. This commit implements
support for clearcoat following the Filament and Khronos specifications,
marking the beginnings of support for multiple PBR layers in Bevy.
The [`KHR_materials_clearcoat`] specification describes the clearcoat
support in glTF. In Blender, applying a clearcoat to the Principled BSDF
node causes the clearcoat settings to be exported via this extension. As
of this commit, Bevy parses and reads the extension data when present in
glTF. Note that the `gltf` crate has no support for
`KHR_materials_clearcoat`; this patch therefore implements the JSON
semantics manually.
Clearcoat is integrated with `StandardMaterial`, but the code is behind
a series of `#ifdef`s that only activate when clearcoat is present.
Additionally, the `pbr_feature_layer_material_textures` Cargo feature
must be active in order to enable support for clearcoat factor maps,
clearcoat roughness maps, and clearcoat normal maps. This approach
mirrors the same pattern used by the existing transmission feature and
exists to avoid running out of texture bindings on platforms like WebGL
and WebGPU. Note that constant clearcoat factors and roughness values
*are* supported in the browser; only the relatively-less-common maps are
disabled on those platforms.
This patch refactors the lighting code in `StandardMaterial`
significantly in order to better support multiple layers in a natural
way. That code was due for a refactor in any case, so this is a nice
improvement.
A new demo, `clearcoat`, has been added. It's based on [the
corresponding three.js demo], but all the assets (aside from the skybox
and environment map) are my original work.
[Filament spec]:
https://google.github.io/filament/Filament.html#materialsystem/clearcoatmodel
[`KHR_materials_clearcoat`]:
https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_clearcoat/README.md
[the corresponding three.js demo]:
https://threejs.org/examples/webgl_materials_physical_clearcoat.html
## Changelog
### Added
* `StandardMaterial` now supports a clearcoat layer, which represents a
thin translucent layer over an underlying material.
* The glTF loader now supports the `KHR_materials_clearcoat` extension,
representing materials with clearcoat layers.
## Migration Guide
* The lighting functions in the `pbr_lighting` WGSL module now have
clearcoat parameters, if `STANDARD_MATERIAL_CLEARCOAT` is defined.
* The `R` reflection vector parameter has been removed from some
lighting functions, as it was unused.
# Objective
- `cargo check --workspace` appears to merge features and dependencies
together, so it does not catch some issues where dependencies are not
properly feature-gated.
- The issues **are** caught, though, by running `cd $crate && cargo
check`.
## Solution
- Manually check each crate for issues.
```shell
# Script used
for i in crates/bevy_* do
pushd $i
cargo check
popd
done
```
- `bevy_color` had an issue where it used `#[derive(Pod, Zeroable)]`
without using `bytemuck`'s `derive` feature.
- The `FpsOverlayPlugin` in `bevy_dev_tools` uses `bevy_ui`'s
`bevy_text` integration without properly enabling `bevy_text` as a
feature.
- `bevy_gizmos`'s `light` module was not properly feature-gated behind
`bevy_pbr`.
- ~~Lights appear to only be implemented in `bevy_pbr` and not
`bevy_sprite`, so I think this is the right call. Can I get a
confirmation by a gizmos person?~~ Confirmed :)
- `bevy_gltf` imported `SmallVec`, but only used it if `bevy_animation`
was enabled.
- There was another issue, but it was more challenging to solve than the
`smallvec` one. Run `cargo check -p bevy_gltf` and it will raise an
issue about `animation_roots`.
<details>
<summary><code>bevy_gltf</code> errors</summary>
```shell
error[E0425]: cannot find value `animation_roots` in this scope
--> crates/bevy_gltf/src/loader.rs:608:26
|
608 | &animation_roots,
| ^^^^^^^^^^^^^^^ not found in this scope
warning: variable does not need to be mutable
--> crates/bevy_gltf/src/loader.rs:1015:5
|
1015 | mut animation_context: Option<AnimationContext>,
| ----^^^^^^^^^^^^^^^^^
| |
| help: remove this `mut`
|
= note: `#[warn(unused_mut)]` on by default
For more information about this error, try `rustc --explain E0425`.
warning: `bevy_gltf` (lib) generated 1 warning
error: could not compile `bevy_gltf` (lib) due to 1 previous error; 1 warning emitted
```
</details>
---
## Changelog
- Fixed `bevy_color`, `bevy_dev_tools`, and `bevy_gizmos` so they can
now compile by themselves.
# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
Currently the built docs only shows the logo and favicon for the top
level `bevy` crate. This makes views like
https://docs.rs/bevy_ecs/latest/bevy_ecs/ look potentially unrelated to
the project at first glance.
## Solution
Reproduce the docs attributes for every crate that Bevy publishes.
Ideally this would be done with some workspace level Cargo.toml control,
but AFAICT, such support does not exist.
