# Objective
- `for_each` methods inconsistently used an actual generic param or `impl Trait` change it to use `impl Trait` always, change them to be consistent
- some methods returned `'w 's` or `'_ '_`, change them to return `'_ 's`
## Solution
- Do what i just said
---
## Changelog
- `iter_unsafe` and `get_unchecked` no longer return borrows tied to `'w`
## Migration Guide
transmute the returned borrow from `iter_unsafe` and `get_unchecked` if this broke you (although preferably find a way to write your code that doesnt need to do this...)
# Objective
Sometimes it's useful to be able to retrieve all the fields of a container type so that they may be processed separately. With reflection, however, we typically only have access to references.
The only alternative is to "clone" the value using `Reflect::clone_value`. This, however, returns a Dynamic type in most cases. The solution there would be to use `FromReflect` instead, but this also has a problem in that it means we need to add `FromReflect` as an additional bound.
## Solution
Add a `drain` method to all container traits. This returns a `Vec<Box<dyn Reflect>>` (except for `Map` which returns `Vec<(Box<dyn Reflect>, Box<dyn Reflect>)>`).
This allows us to do things a lot simpler. For example, if we finished processing a struct and just need a particular value:
```rust
// === OLD === //
/// May or may not return a Dynamic*** value (even if `container` wasn't a `DynamicStruct`)
fn get_output(container: Box<dyn Struct>, output_index: usize) -> Box<dyn Reflect> {
container.field_at(output_index).unwrap().clone_value()
}
// === NEW === //
/// Returns _exactly_ whatever was in the given struct
fn get_output(container: Box<dyn Struct>, output_index: usize) -> Box<dyn Reflect> {
container.drain().remove(output_index).unwrap()
}
```
### Discussion
* Is `drain` the best method name? It makes sense that it "drains" all the fields and that it consumes the container in the process, but I'm open to alternatives.
---
## Changelog
* Added a `drain` method to the following traits:
* `Struct`
* `TupleStruct`
* `Tuple`
* `Array`
* `List`
* `Map`
* `Enum`
# Objective
- The reflection `List` trait does not have a `pop` function.
- Popping elements off a list is a common use case and is almost always supported by `List`-like types.
## Solution
- Add the `pop()` method to the `List` trait and add the appropriate implementations of this function.
## Migration Guide
- Any custom type that implements the `List` trait will now need to implement the `pop` method.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#5763
## Solution
Implemented as reflect value like the current `Range`. Is there a benefit to changing everything to a reflect struct?
# Objective
remove `insert_resource_with_id` because `insert_resource_by_id` exists and does almost exactly the same thing
blocked on #5587 because otherwise we will leak a resource when it's inserted
## Solution
remove the function and also add a safety invariant of to `insert_resource_by_id` that the id be valid for the world.
I didn't see any discussion in #4447 about this safety invariant being left off in favor of a panic so I'm curious if there was one or if it just seemed nicer to have less safety invariants for callers to uphold 😅
---
## Changelog
- safety invariant added to `insert_resource_by_id` requiring the id to be valid for world
## Migration Guide
- audit any calls to `insert_resource_by_id` making sure that the id is valid for the world
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#5581
## Solution
`Window::scale_factor` already has logic for selecting the overridden or actual scale factor, so use it.
I tested this with the displays I have access to, but more testing would be nice. This seems like a pretty straightforward bug/fix though.
## Changelog
### Fixed
Fixed window centering on high-dpi displays.
# Objective
Fixes#5687
## Solution
Update the methods on the `Entity` struct to be `const`, so we can
define compile-time constants and more generally use them in a const
context.
---
## Changelog
### Added
- Most `Entity` methods are now `const fn`.
# Objective
It's not obvious that the `AssetServerSettings` resource must be added before the `AssetPlugin`.
## Solution
Add a doc comment to this effect.
# Objective
- Reduce debugging burden when using events by telling user when they missed an event.
## Solution
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Fixes#5817.
- Removes std::vec::Vec ambiguities in derive_bundle macro
## Solution
Prepend :: to standard library full Vec qualified type name (::std::vec::Vec)
# Objective
- Document `QueryCombinationIter`
## Solution
- Describe the item, add usage and examples
- Copy notes about the number of query items generated from the corresponding query methods (they will be removed in #5742 ([motivation]))
## Additional notes
- Derived from #4989
[motivation]: https://github.com/bevyengine/bevy/pull/4989#issuecomment-1208421496
# Objective
Right now, users have to implement basic system adapters such as `Option` <-> `Result` conversions by themselves. This is slightly annoying and discourages the use of system chaining.
## Solution
Add the module `system_adapter` to the prelude, which contains a collection of common adapters. This is very ergonomic in practice.
## Examples
Convenient early returning.
```rust
use bevy::prelude::*;
App::new()
// If the system fails, just try again next frame.
.add_system(pet_dog.chain(system_adapter::ignore))
.run();
#[derive(Component)]
struct Dog;
fn pet_dog(dogs: Query<(&Name, Option<&Parent>), With<Dog>>) -> Option<()> {
let (dog, dad) = dogs.iter().next()?;
println!("You pet {dog}. He/she/they are a good boy/girl/pupper.");
let (dad, _) = dogs.get(dad?.get()).ok()?;
println!("Their dad's name is {dad}");
Some(())
}
```
Converting the output of a system
```rust
use bevy::prelude::*;
App::new()
.add_system(
find_name
.chain(system_adapter::new(String::from))
.chain(spawn_with_name),
)
.run();
fn find_name() -> &'static str { /* ... */ }
fn spawn_with_name(In(name): In<String>, mut commands: Commands) {
commands.spawn().insert(Name::new(name));
}
```
---
## Changelog
* Added the module `bevy_ecs::prelude::system_adapter`, which contains a collection of common system chaining adapters.
* `new` - Converts a regular fn to a system adapter.
* `unwrap` - Similar to `Result::unwrap`
* `ignore` - Discards the output of the previous system.
# Objective
- Allow users to change the scaling of the UI
- Adopted from #2808
## Solution
- This is an accessibility feature for fixed-size UI elements, allowing the developer to expose a range of UI scales for the player to set a scale that works for their needs.
> - The user can modify the UiScale struct to change the scaling at runtime. This multiplies the Px values by the scale given, while not touching any others.
> - The example showcases how this even allows for fluid transitions
> Here's how the example looks like:
https://user-images.githubusercontent.com/1631166/132979069-044161a9-8e85-45ab-9e93-fcf8e3852c2b.mp4
---
## Changelog
- Added a `UiScale` which can be used to scale all of UI
Co-authored-by: Andreas Weibye <13300393+Weibye@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Help users who are using `load_folder` in wasm builds to find a slightly shorter path to figuring out why their stuff is broken.
## Solution
Adds a warning to `read_directory` in the `WasmAssetIo`.
This is extremely similar to the warning already emitted a few lines below for `watch_for_changes`.
# Objective
Some of the reflection impls for container types had unnecessary `Clone` bounds on their generic arguments. These come from before `FromReflect` when types were instead bound by `Reflect + Clone`. With `FromReflect` this is no longer necessary.
## Solution
Removed all leftover `Clone` bounds from types that use `FromReflect` instead.
## Note
I skipped `Result<T, E>`, `HashSet<T>`, and `Range<T>` since those do not use `FromReflect`. This should probably be handled in a separate PR since it would be a breaking change.
---
## Changelog
- Remove unnecessary `Clone` bounds on reflected containers
# Objective
#5658 made it so that `FromReflect` was used as the bound for `T` in `Option<T>`. However, it did not use this change effectively for the implementation of `Reflect::apply` (it was still using `take`, which would fail for Dynamic types).
Additionally, the changes were not consistent with other methods within the file, such as the ones for `Vec<T>` and `HashMap<K, V>`.
## Solution
Update `Option<T>` to fallback on `FromReflect` if `take` fails, instead of wholly relying on one or the other.
I also chose to update the error messages, as they weren't all too descriptive before.
---
## Changelog
- Use `FromReflect::from_reflect` as a fallback in the `Reflect::apply` implementation for `Option<T>`
# Objective
`SmallVec<T>` was missing a `GetTypeRegistration` impl.
## Solution
Added a `GetTypeRegistration` impl.
---
## Changelog
* Added a `GetTypeRegistration` impl for `SmallVec<T>`
Type registrations were only present for some of the `bevy_math` types, and missing for others. This is a very strange inconsistency, given that they all impl `Reflect` and `FromReflect`. In practice, this means these types cannot be used in scenes.
In particular, this is especially problematic, because `Affine3A` is one of the missing types, and it is now used in `GlobalTransform`. Trying to create a bevy scene that contains `GlobalTransform`s results in an error due to the missing type registration.
# Objective
- While generating https://github.com/jakobhellermann/bevy_reflect_ts_type_export/blob/main/generated/types.ts, I noticed that some types that implement `Reflect` did not register themselves
- `Viewport` isn't reflect but can be (there's a TODO)
## Solution
- register all reflected types
- derive `Reflect` for `Viewport`
## Changelog
- more types are not registered in the type registry
- remove `Serialize`, `Deserialize` impls from `Viewport`
I also decided to remove the `Serialize, Deserialize` from the `Viewport`, since they were (AFAIK) only used for reflection, which now is done without serde. So this is technically a breaking change for people who relied on that impl directly.
Personally I don't think that every bevy type should implement `Serialize, Deserialize`, as that would lead to a ton of code generation that mostly isn't necessary because we can do the same with `Reflect`, but if this is deemed controversial I can remove it from this PR.
## Migration Guide
- `KeyCode` now implements `Reflect` not as `reflect_value`, but with proper struct reflection. The `Serialize` and `Deserialize` impls were removed, now that they are no longer required for scene serialization.
# Objective
Fix a nasty system ordering bug between `update_frusta` and `camera_system` that lead to incorrect frustum s, leading to excessive culling and extremely hard-to-debug visual glitches
## Solution
- add explicit system ordering
# Objective
Very small convenience constructors added to `Size`.
Does not change current examples too much but I'm working on a rather complex UI use-case where this cuts down on some extra typing :)
# Objective
- Fixes#4451
## Solution
- Conditionally compile entity ID cursor as `AtomicI32` when compiling on a platform that does not support 64-bit atomics.
- This effectively raises the MSRV to 1.60 as it uses a `#[cfg]` that was only just stabilized there. (should this be noted in changelog?)
---
## Changelog
- Added `bevy_ecs` support for platforms without 64-bit atomic ints
## Migration Guide
N/A
# Objective
- Morten Mikkelsen clarified that the world normal and tangent must be normalized in the vertex stage and the interpolated values must not be normalized in the fragment stage. This is in order to match the mikktspace approach exactly.
- Fixes#5514 by ensuring the tangent basis matrix (TBN) is orthonormal
## Solution
- Normalize the world normal in the vertex stage and not the fragment stage
- Normalize the world tangent xyz in the vertex stage
- Take into account the sign of the determinant of the local to world matrix when calculating the bitangent
---
## Changelog
- Fixed - scaling a model that uses normal mapping now has correct lighting again
# Objective
- Fixes#5365
- The `assert!()` when the resource from `World::resource_scope` is inserted into the world is not descriptive.
## Solution
- Add more context to the assert inside of `World::resource_scope` when the `FnOnce` param inserts the resource.
# Objective
`FromReflect` is a commonly used component to the Reflect API. It's required as a bound for reflecting things like `Vec<T>` and `HashMap<K, V>` and is generally useful (if not necessary) to derive on most structs or enums.
Currently, however, it is not exported in `bevy_reflect`'s prelude. This means a module that uses `bevy_reflect` might have the following two lines:
```rust
use bevy_reflect::prelude::*;
use bevy_reflect::FromReflect;
```
Additionally, users of the full engine might need to put:
```rust
use bevy::prelude::*;
use bevy::reflect::FromReflect;
```
## Solution
Add `FromReflect` to the prelude of `bevy_reflect`.
---
## Changelog
- Added `FromReflect` to the prelude of `bevy_reflect`
# Objective
- Similar to `SystemChangeTick`, probably somewhat useful for debugging messages.
---
## Changelog
- Added `SystemName` which copies the `SystemMeta::name` field so it can be accessed within a system.
Probably a copy-paste error, but `Add<Color>` and `AddAssign<Color>` should use `rhs.as_hlsa_f32()` instead of `rhs.as_linear_rgba_f32()` when the LHS is a `Color::Hsla`. Fixes#5543.
Co-authored-by: Verte <105466627+vertesians@users.noreply.github.com>
# Objective
The reflection impls on `Option<T>` have the bound `T: Reflect + Clone`. This means that using `FromReflect` requires `Clone` even though we can normally get away with just `FromReflect`.
## Solution
Update the bounds on `Option<T>` to match that of `Vec<T>`, where `T: FromReflect`.
This helps remove a `Clone` implementation that may be undesired but added for the sole purpose of getting the code to compile.
---
## Changelog
* Reflection on `Option<T>` now has `T` bound by `FromReflect` rather than `Reflect + Clone`
* Added a `FromReflect` impl for `Instant`
## Migration Guide
If using `Option<T>` with Bevy's reflection API, `T` now needs to implement `FromReflect` rather than just `Clone`. This can be achieved easily by simply deriving `FromReflect`:
```rust
// OLD
#[derive(Reflect, Clone)]
struct Foo;
let reflected: Box<dyn Reflect> = Box::new(Some(Foo));
// NEW
#[derive(Reflect, FromReflect)]
struct Foo;
let reflected: Box<dyn Reflect> = Box::new(Some(Foo));
```
> Note: You can still derive `Clone`, but it's not required in order to compile.
# Objective
Rust 1.63 resolved [an issue](https://github.com/rust-lang/rust/issues/83701) that prevents you from combining explicit generic arguments with `impl Trait` arguments.
Now, we no longer need to use dynamic dispatch to work around this.
## Migration Guide
The methods `Schedule::get_stage` and `get_stage_mut` now accept `impl StageLabel` instead of `&dyn StageLabel`.
### Before
```rust
let stage = schedule.get_stage_mut::<SystemStage>(&MyLabel)?;
```
### After
```rust
let stage = schedule.get_stage_mut::<SystemStage>(MyLabel)?;
```
# Objective
This PR changes it possible to use vertex colors without a texture using the bevy_sprite ColorMaterial.
Fixes#5679
## Solution
- Made multiplication of the output color independent of the COLOR_MATERIAL_FLAGS_TEXTURE_BIT bit
- Extended mesh2d_vertex_color_texture example to show off both vertex colors and tinting
Not sure if extending the existing example was the right call but it seems to be reasonable to me.
I couldn't find any tests for the shaders and I think adding shader testing would be beyond the scope of this PR. So no tests in this PR. 😬
Co-authored-by: Jonas Wagner <jonas@29a.ch>
# Objective
While poking around the hierarchy code, I wondered why some asserts in tests were duplicated.
Some git blame later, I found out that commit ( 8eb0440f1e ) added already existing asserts while removing others.
## Solution
Remove the duplicated asserts.
# Objective
When an invalid attribute is inserted and the LogPlugin is not enabled the full error is not printed which means makes it hard to diagnose.
## Solution
- Always print the full message in the panic.
## Notes
I originally had a separate error log because I wanted to make it clearer for users, but this is probably causing more issues than necessary.
# Objective
Remove unused `enum DepthCalculation` and its usages. This was used to compute visible entities in the [old renderer](db665b96c0/crates/bevy_render/src/camera/visible_entities.rs), but is now unused.
## Solution
`sed 's/DepthCalculation//g'`
---
## Changelog
### Changed
Removed `bevy_render:📷:DepthCalculation`.
## Migration Guide
Remove references to `bevy_render:📷:DepthCalculation`, such as `use bevy_render:📷:DepthCalculation`. Remove `depth_calculation` fields from Projections.
# Objective
Make CI pass on bevy main.
Update to rust-1.63, updated clippy to 1.63 which introduced the following enhancements:
- [undocumented_unsafe_blocks](https://rust-lang.github.io/rust-clippy/master/index.html#undocumented_unsafe_blocks): Now also lints on unsafe trait implementations
This caught two incorrectly written ( but existing) safety comments for unsafe traits.
## Solution
Fix the comment to use `SAFETY:`
# Objective
While trying out the lint `unsafe_op_in_unsafe_fn` I noticed that `insert_resource_by_id` didn't drop the old value if it already existed, and reimplemented `Column::replace` manually for no apparent reason.
## Solution
- use `Column::replace` and add a test expecting the correct drop count
---
## Changelog
- `World::insert_resource_by_id` will now correctly drop the old resource value, if one already existed
# Objective
- The `Display` impl for `ReflectPathError` is pretty unspecific (e.g. `the current struct doesn't have a field with the given name`
- it has info for better messages available
## Solution
- make the display impl more descriptive by including values from the type
# Objective
- `ReflectMut` served no purpose that wasn't met by `Mut<dyn Reflect>` which is easier to understand since you have to deal with fewer types
- there is another `ReflectMut` type that could be confused with this one
## Solution/Changelog
- relax `T: ?Sized` bound in `Mut<T>`
- replace all instances of `ReflectMut` with `Mut<dyn Reflect>`
# Objective
Provide a safe API to access an `EntityMut`'s `World`.
## Solution
* Add `EntityMut::into_world_mut` for safe access to the entity's world.
---
## Changelog
* Add `EntityMut::into_world_mut` for safe access to the entity's world.
# Objective
`ShaderData` is marked as public, but is an internal type only used by one other
internal type, so it should be made private.
## Solution
`ShaderData` is only used in `ShaderCache`, and the latter is private,
so there is no need to make the former public. This change removes the
`pub` keyword from `ShaderData`, hidding it as the implementation detail
it is.
Split from #5600
# Objective
- I often have UI nodes that are completely transparent and just for organisation
- Don't render them
- I doesn't bring a lot of improvements, but it doesn't add a lot of complexity either
*This PR description is an edited copy of #5007, written by @alice-i-cecile.*
# Objective
Follow-up to https://github.com/bevyengine/bevy/pull/2254. The `Resource` trait currently has a blanket implementation for all types that meet its bounds.
While ergonomic, this results in several drawbacks:
* it is possible to make confusing, silent mistakes such as inserting a function pointer (Foo) rather than a value (Foo::Bar) as a resource
* it is challenging to discover if a type is intended to be used as a resource
* we cannot later add customization options (see the [RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/27-derive-component.md) for the equivalent choice for Component).
* dependencies can use the same Rust type as a resource in invisibly conflicting ways
* raw Rust types used as resources cannot preserve privacy appropriately, as anyone able to access that type can read and write to internal values
* we cannot capture a definitive list of possible resources to display to users in an editor
## Notes to reviewers
* Review this commit-by-commit; there's effectively no back-tracking and there's a lot of churn in some of these commits.
*ira: My commits are not as well organized :')*
* I've relaxed the bound on Local to Send + Sync + 'static: I don't think these concerns apply there, so this can keep things simple. Storing e.g. a u32 in a Local is fine, because there's a variable name attached explaining what it does.
* I think this is a bad place for the Resource trait to live, but I've left it in place to make reviewing easier. IMO that's best tackled with https://github.com/bevyengine/bevy/issues/4981.
## Changelog
`Resource` is no longer automatically implemented for all matching types. Instead, use the new `#[derive(Resource)]` macro.
## Migration Guide
Add `#[derive(Resource)]` to all types you are using as a resource.
If you are using a third party type as a resource, wrap it in a tuple struct to bypass orphan rules. Consider deriving `Deref` and `DerefMut` to improve ergonomics.
`ClearColor` no longer implements `Component`. Using `ClearColor` as a component in 0.8 did nothing.
Use the `ClearColorConfig` in the `Camera3d` and `Camera2d` components instead.
Co-authored-by: Alice <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: devil-ira <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- I wanted to have controls independent from keyboard layout and found that bevy doesn't have a proper implementation for that
## Solution
- I created a `ScanCode` enum with two hundreds scan codes and updated `keyboard_input_system` to include and update `ResMut<Input<ScanCode>>`
- closes both https://github.com/bevyengine/bevy/issues/2052 and https://github.com/bevyengine/bevy/issues/862
Co-authored-by: Bleb1k <91003089+Bleb1k@users.noreply.github.com>
#4197 intended to remove all `pub` constructors of `Children` and `Parent` and it seems like this one was missed.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Fixes#5544
- Part of the splitting process of #3692.
## Solution
- Document everything in the `gamepad.rs` file.
- Add a doc example for mocking gamepad input.
---
## Changelog
- Added and updated the documentation inside of the `gamepad.rs` file.
# Objective
- Similar to #5512 , the `View` struct definition in the shaders in `bevy_sprite` and `bevy_ui` were out of sync with the rust-side `ViewUniform`. Only `view_proj` was being used and is the first member and as those shaders are not customisable it makes little difference in practice, unlike for `Mesh2d`.
## Solution
- Sync shader `View` struct definition in `bevy_sprite` and `bevy_ui` with the correct definition that matches `ViewUniform`
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Change frametimediagnostic from seconds to milliseconds because this will always be less than one seconds and is the common diagnostic display unit for game engines.
## Solution
- multiplied the existing value by 1000
---
## Changelog
Frametimes are now reported in milliseconds
Co-authored-by: Syama Mishra <38512086+SyamaMishra@users.noreply.github.com>
Co-authored-by: McSpidey <mcspidey@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
In Bevy 0.8, the default filter mode was changed to linear (#4465). I believe this is a sensible default, but it's also very common to want to use point filtering (e.g. for pixel art games).
## Solution
I am proposing including `bevy_render::texture::ImageSettings` in the Bevy prelude so it is more ergonomic to change the filtering in such cases.
---
## Changelog
### Added
- Added `bevy_render::texture::ImageSettings` to prelude.
# Objective
Add reflect/from reflect impls for NonZero integer types. I'm guessing these haven't been added yet because no one has needed them as of yet.
# Objective
Simplify the worldquery trait hierarchy as much as possible by putting it all in one trait. If/when gats are stabilised this can be trivially migrated over to use them, although that's not why I made this PR, those reasons are:
- Moves all of the conceptually related unsafe code for a worldquery next to eachother
- Removes now unnecessary traits simplifying the "type system magic" in bevy_ecs
---
## Changelog
All methods/functions/types/consts on `FetchState` and `Fetch` traits have been moved to the `WorldQuery` trait and the other traits removed. `WorldQueryGats` now only contains an `Item` and `Fetch` assoc type.
## Migration Guide
Implementors should move items in impls to the `WorldQuery/Gats` traits and remove any `Fetch`/`FetchState` impls
Any use sites of items in the `Fetch`/`FetchState` traits should be updated to use the `WorldQuery` trait items instead
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#5384 and maybe other issues around window closing/app not exiting
## Solution
There are three systems involved in exiting when closing a window:
- `close_when_requested` asking Winit to close the window in stage `Update`
- `exit_on_all_closed` exiting when no window remains opened in stage `Update`
- `change_window` removing windows that are closed in stage `PostUpdate`
This ordering meant that when closing a window, we had to run one more frame to actually exit. As there was no window, panics could occur in systems assuming there was a window. In case of Bevy app using a low power options, that means waiting for the timeout before actually exiting the app (60 seconds by default)
This PR changes the ordering so that `exit_on_all_closed` happens after `change_window` in the same frame, so there isn't an extra frame without window
> In draft until #4761 is merged. See the relevant commits [here](a85fe94a18).
---
# Objective
Update enums across Bevy to use the new enum reflection and get rid of `#[reflect_value(...)]` usages.
## Solution
Find and replace all[^1] instances of `#[reflect_value(...)]` on enum types.
---
## Changelog
- Updated all[^1] reflected enums to implement `Enum` (i.e. they are no longer `ReflectRef::Value`)
## Migration Guide
Bevy-defined enums have been updated to implement `Enum` and are not considered value types (`ReflectRef::Value`) anymore. This means that their serialized representations will need to be updated. For example, given the Bevy enum:
```rust
pub enum ScalingMode {
None,
WindowSize,
Auto { min_width: f32, min_height: f32 },
FixedVertical(f32),
FixedHorizontal(f32),
}
```
You will need to update the serialized versions accordingly.
```js
// OLD FORMAT
{
"type": "bevy_render:📷:projection::ScalingMode",
"value": FixedHorizontal(720),
},
// NEW FORMAT
{
"type": "bevy_render:📷:projection::ScalingMode",
"enum": {
"variant": "FixedHorizontal",
"tuple": [
{
"type": "f32",
"value": 720,
},
],
},
},
```
This may also have other smaller implications (such as `Debug` representation), but serialization is probably the most prominent.
[^1]: All enums except `HandleId` as neither `Uuid` nor `AssetPathId` implement the reflection traits
# Objective
> This is a revival of #1347. Credit for the original PR should go to @Davier.
Currently, enums are treated as `ReflectRef::Value` types by `bevy_reflect`. Obviously, there needs to be better a better representation for enums using the reflection API.
## Solution
Based on prior work from @Davier, an `Enum` trait has been added as well as the ability to automatically implement it via the `Reflect` derive macro. This allows enums to be expressed dynamically:
```rust
#[derive(Reflect)]
enum Foo {
A,
B(usize),
C { value: f32 },
}
let mut foo = Foo::B(123);
assert_eq!("B", foo.variant_name());
assert_eq!(1, foo.field_len());
let new_value = DynamicEnum::from(Foo::C { value: 1.23 });
foo.apply(&new_value);
assert_eq!(Foo::C{value: 1.23}, foo);
```
### Features
#### Derive Macro
Use the `#[derive(Reflect)]` macro to automatically implement the `Enum` trait for enum definitions. Optionally, you can use `#[reflect(ignore)]` with both variants and variant fields, just like you can with structs. These ignored items will not be considered as part of the reflection and cannot be accessed via reflection.
```rust
#[derive(Reflect)]
enum TestEnum {
A,
// Uncomment to ignore all of `B`
// #[reflect(ignore)]
B(usize),
C {
// Uncomment to ignore only field `foo` of `C`
// #[reflect(ignore)]
foo: f32,
bar: bool,
},
}
```
#### Dynamic Enums
Enums may be created/represented dynamically via the `DynamicEnum` struct. The main purpose of this struct is to allow enums to be deserialized into a partial state and to allow dynamic patching. In order to ensure conversion from a `DynamicEnum` to a concrete enum type goes smoothly, be sure to add `FromReflect` to your derive macro.
```rust
let mut value = TestEnum::A;
// Create from a concrete instance
let dyn_enum = DynamicEnum::from(TestEnum::B(123));
value.apply(&dyn_enum);
assert_eq!(TestEnum::B(123), value);
// Create a purely dynamic instance
let dyn_enum = DynamicEnum::new("TestEnum", "A", ());
value.apply(&dyn_enum);
assert_eq!(TestEnum::A, value);
```
#### Variants
An enum value is always represented as one of its variants— never the enum in its entirety.
```rust
let value = TestEnum::A;
assert_eq!("A", value.variant_name());
// Since we are using the `A` variant, we cannot also be the `B` variant
assert_ne!("B", value.variant_name());
```
All variant types are representable within the `Enum` trait: unit, struct, and tuple.
You can get the current type like:
```rust
match value.variant_type() {
VariantType::Unit => println!("A unit variant!"),
VariantType::Struct => println!("A struct variant!"),
VariantType::Tuple => println!("A tuple variant!"),
}
```
> Notice that they don't contain any values representing the fields. These are purely tags.
If a variant has them, you can access the fields as well:
```rust
let mut value = TestEnum::C {
foo: 1.23,
bar: false
};
// Read/write specific fields
*value.field_mut("bar").unwrap() = true;
// Iterate over the entire collection of fields
for field in value.iter_fields() {
println!("{} = {:?}", field.name(), field.value());
}
```
#### Variant Swapping
It might seem odd to group all variant types under a single trait (why allow `iter_fields` on a unit variant?), but the reason this was done ~~is to easily allow *variant swapping*.~~ As I was recently drafting up the **Design Decisions** section, I discovered that other solutions could have been made to work with variant swapping. So while there are reasons to keep the all-in-one approach, variant swapping is _not_ one of them.
```rust
let mut value: Box<dyn Enum> = Box::new(TestEnum::A);
value.set(Box::new(TestEnum::B(123))).unwrap();
```
#### Serialization
Enums can be serialized and deserialized via reflection without needing to implement `Serialize` or `Deserialize` themselves (which can save thousands of lines of generated code). Below are the ways an enum can be serialized.
> Note, like the rest of reflection-based serialization, the order of the keys in these representations is important!
##### Unit
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "A"
}
}
```
##### Tuple
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "B",
"tuple": [
{
"type": "usize",
"value": 123
}
]
}
}
```
<details>
<summary>Effects on Option</summary>
This ends up making `Option` look a little ugly:
```json
{
"type": "core::option::Option<usize>",
"enum": {
"variant": "Some",
"tuple": [
{
"type": "usize",
"value": 123
}
]
}
}
```
</details>
##### Struct
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "C",
"struct": {
"foo": {
"type": "f32",
"value": 1.23
},
"bar": {
"type": "bool",
"value": false
}
}
}
}
```
## Design Decisions
<details>
<summary><strong>View Section</strong></summary>
This section is here to provide some context for why certain decisions were made for this PR, alternatives that could have been used instead, and what could be improved upon in the future.
### Variant Representation
One of the biggest decisions was to decide on how to represent variants. The current design uses a "all-in-one" design where unit, tuple, and struct variants are all simultaneously represented by the `Enum` trait. This is not the only way it could have been done, though.
#### Alternatives
##### 1. Variant Traits
One way of representing variants would be to define traits for each variant, implementing them whenever an enum featured at least one instance of them. This would allow us to define variants like:
```rust
pub trait Enum: Reflect {
fn variant(&self) -> Variant;
}
pub enum Variant<'a> {
Unit,
Tuple(&'a dyn TupleVariant),
Struct(&'a dyn StructVariant),
}
pub trait TupleVariant {
fn field_len(&self) -> usize;
// ...
}
```
And then do things like:
```rust
fn get_tuple_len(foo: &dyn Enum) -> usize {
match foo.variant() {
Variant::Tuple(tuple) => tuple.field_len(),
_ => panic!("not a tuple variant!")
}
}
```
The reason this PR does not go with this approach is because of the fact that variants are not separate types. In other words, we cannot implement traits on specific variants— these cover the *entire* enum. This means we offer an easy footgun:
```rust
let foo: Option<i32> = None;
let my_enum = Box::new(foo) as Box<dyn TupleVariant>;
```
Here, `my_enum` contains `foo`, which is a unit variant. However, since we need to implement `TupleVariant` for `Option` as a whole, it's possible to perform such a cast. This is obviously wrong, but could easily go unnoticed. So unfortunately, this makes it not a good candidate for representing variants.
##### 2. Variant Structs
To get around the issue of traits necessarily needing to apply to both the enum and its variants, we could instead use structs that are created on a per-variant basis. This was also considered but was ultimately [[removed](71d27ab3c6) due to concerns about allocations.
Each variant struct would probably look something like:
```rust
pub trait Enum: Reflect {
fn variant_mut(&self) -> VariantMut;
}
pub enum VariantMut<'a> {
Unit,
Tuple(TupleVariantMut),
Struct(StructVariantMut),
}
struct StructVariantMut<'a> {
fields: Vec<&'a mut dyn Reflect>,
field_indices: HashMap<Cow<'static, str>, usize>
}
```
This allows us to isolate struct variants into their own defined struct and define methods specifically for their use. It also prevents users from casting to it since it's not a trait. However, this is not an optimal solution. Both `field_indices` and `fields` will require an allocation (remember, a `Box<[T]>` still requires a `Vec<T>` in order to be constructed). This *might* be a problem if called frequently enough.
##### 3. Generated Structs
The original design, implemented by @Davier, instead generates structs specific for each variant. So if we had a variant path like `Foo::Bar`, we'd generate a struct named `FooBarWrapper`. This would be newtyped around the original enum and forward tuple or struct methods to the enum with the chosen variant.
Because it involved using the `Tuple` and `Struct` traits (which are also both bound on `Reflect`), this meant a bit more code had to be generated. For a single struct variant with one field, the generated code amounted to ~110LoC. However, each new field added to that variant only added ~6 more LoC.
In order to work properly, the enum had to be transmuted to the generated struct:
```rust
fn variant(&self) -> crate::EnumVariant<'_> {
match self {
Foo::Bar {value: i32} => {
let wrapper_ref = unsafe {
std::mem::transmute::<&Self, &FooBarWrapper>(self)
};
crate::EnumVariant::Struct(wrapper_ref as &dyn crate::Struct)
}
}
}
```
This works because `FooBarWrapper` is defined as `repr(transparent)`.
Out of all the alternatives, this would probably be the one most likely to be used again in the future. The reasons for why this PR did not continue to use it was because:
* To reduce generated code (which would hopefully speed up compile times)
* To avoid cluttering the code with generated structs not visible to the user
* To keep bevy_reflect simple and extensible (these generated structs act as proxies and might not play well with current or future systems)
* To avoid additional unsafe blocks
* My own misunderstanding of @Davier's code
That last point is obviously on me. I misjudged the code to be too unsafe and unable to handle variant swapping (which it probably could) when I was rebasing it. Looking over it again when writing up this whole section, I see that it was actually a pretty clever way of handling variant representation.
#### Benefits of All-in-One
As stated before, the current implementation uses an all-in-one approach. All variants are capable of containing fields as far as `Enum` is concerned. This provides a few benefits that the alternatives do not (reduced indirection, safer code, etc.).
The biggest benefit, though, is direct field access. Rather than forcing users to have to go through pattern matching, we grant direct access to the fields contained by the current variant. The reason we can do this is because all of the pattern matching happens internally. Getting the field at index `2` will automatically return `Some(...)` for the current variant if it has a field at that index or `None` if it doesn't (or can't).
This could be useful for scenarios where the variant has already been verified or just set/swapped (or even where the type of variant doesn't matter):
```rust
let dyn_enum: &mut dyn Enum = &mut Foo::Bar {value: 123};
// We know it's the `Bar` variant
let field = dyn_enum.field("value").unwrap();
```
Reflection is not a type-safe abstraction— almost every return value is wrapped in `Option<...>`. There are plenty of places to check and recheck that a value is what Reflect says it is. Forcing users to have to go through `match` each time they want to access a field might just be an extra step among dozens of other verification processes.
Some might disagree, but ultimately, my view is that the benefit here is an improvement to the ergonomics and usability of reflected enums.
</details>
---
## Changelog
### Added
* Added `Enum` trait
* Added `Enum` impl to `Reflect` derive macro
* Added `DynamicEnum` struct
* Added `DynamicVariant`
* Added `EnumInfo`
* Added `VariantInfo`
* Added `StructVariantInfo`
* Added `TupleVariantInfo`
* Added `UnitVariantInfo`
* Added serializtion/deserialization support for enums
* Added `EnumSerializer`
* Added `VariantType`
* Added `VariantFieldIter`
* Added `VariantField`
* Added `enum_partial_eq(...)`
* Added `enum_hash(...)`
### Changed
* `Option<T>` now implements `Enum`
* `bevy_window` now depends on `bevy_reflect`
* Implemented `Reflect` and `FromReflect` for `WindowId`
* Derive `FromReflect` on `PerspectiveProjection`
* Derive `FromReflect` on `OrthographicProjection`
* Derive `FromReflect` on `WindowOrigin`
* Derive `FromReflect` on `ScalingMode`
* Derive `FromReflect` on `DepthCalculation`
## Migration Guide
* Enums no longer need to be treated as values and usages of `#[reflect_value(...)]` can be removed or replaced by `#[reflect(...)]`
* Enums (including `Option<T>`) now take a different format when serializing. The format is described above, but this may cause issues for existing scenes that make use of enums.
---
Also shout out to @nicopap for helping clean up some of the code here! It's a big feature so help like this is really appreciated!
Co-authored-by: Gino Valente <gino.valente.code@gmail.com>
# Objective
Currently, actually using a `Local` on a system requires that it be `T: FromWorld`, but that requirement is only expressed on the `SystemParam` machinery, which leads to the confusing error message for when the user attempts to add an invalid system. By adding these bounds to `Local` directly, it improves clarity on usage and semantics.
## Solution
- Add `T: FromWorld` bound to `Local`'s definition
## Migration Guide
- It might be possible for references to `Local`s without `T: FromWorld` to exist, but these should be exceedingly rare and probably dead code. In the event that one of these is encountered, the easiest solutions are to delete the code or wrap the inner `T` in an `Option` to allow it to be default constructed to `None`.
# Objective
- Migrate changes from #3503.
## Solution
- Change `Size<T>` and `UiRect<T>` to `Size` and `UiRect` using `Val`.
- Implement `Sub`, `SubAssign`, `Mul`, `MulAssign`, `Div` and `DivAssign` for `Val`.
- Update tests for `Size`.
---
## Changelog
### Changed
- The generic `T` of `Size` and `UiRect` got removed and instead they both now always use `Val`.
## Migration Guide
- The generic `T` of `Size` and `UiRect` got removed and instead they both now always use `Val`. If you used a `Size<f32>` consider replacing it with a `Vec2` which is way more powerful.
Co-authored-by: KDecay <KDecayMusic@protonmail.com>
# Objective
View mesh2d_view_types.wgsl was missing a couple of fields present in bevy::render::ViewUniform, causing rendering issues for shaders using later fields.
## Solution
Solved by adding the fields in question
# Objective
- Fix / support KTX2 array / cubemap / cubemap array textures
- Fixes#4495 . Supersedes #4514 .
## Solution
- Add `Option<TextureViewDescriptor>` to `Image` to enable configuration of the `TextureViewDimension` of a texture.
- This allows users to set `D2Array`, `D3`, `Cube`, `CubeArray` or whatever they need
- Automatically configure this when loading KTX2
- Transcode all layers and faces instead of just one
- Use the UASTC block size of 128 bits, and the number of blocks in x/y for a given mip level in order to determine the offset of the layer and face within the KTX2 mip level data
- `wgpu` wants data ordered as layer 0 mip 0..n, layer 1 mip 0..n, etc. See https://docs.rs/wgpu/latest/wgpu/util/trait.DeviceExt.html#tymethod.create_texture_with_data
- Reorder the data KTX2 mip X layer Y face Z to `wgpu` layer Y face Z mip X order
- Add a `skybox` example to demonstrate / test loading cubemaps from PNG and KTX2, including ASTC 4x4, BC7, and ETC2 compression for support everywhere. Note that you need to enable the `ktx2,zstd` features to be able to load the compressed textures.
---
## Changelog
- Fixed: KTX2 array / cubemap / cubemap array textures
- Fixes: Validation failure for compressed textures stored in KTX2 where the width/height are not a multiple of the block dimensions.
- Added: `Image` now has an `Option<TextureViewDescriptor>` field to enable configuration of the texture view. This is useful for configuring the `TextureViewDimension` when it is not just a plain 2D texture and the loader could/did not identify what it should be.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Replace `many_for_each_mut` with `iter_many_mut` using the same tricks to avoid aliased mutability that `iter_combinations_mut` uses.
<sub>I tried rebasing the draft PR I made for this before and it died. F</sub>
## Why
`many_for_each_mut` is worse for a few reasons:
1. The closure prevents the use of `continue`, `break`, and `return` behaves like a limited `continue`.
2. rustfmt will crumple it and double the indentation when the line gets too long.
```rust
query.many_for_each_mut(
&entity_list,
|(mut transform, velocity, mut component_c)| {
// Double trouble.
},
);
```
3. It is more surprising to have `many_for_each_mut` as a mutable counterpart to `iter_many` than `iter_many_mut`.
4. It required a separate unsafe fn; more unsafe code to maintain.
5. The `iter_many_mut` API matches the existing `iter_combinations_mut` API.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Sadly, #4944 introduces a serious exponential despawn behavior, which cannot be included in 0.8. [Handling AABBs properly is a controversial topic](https://github.com/bevyengine/bevy/pull/5423#issuecomment-1199995825) and one that deserves more time than the day we have left before release.
## Solution
This reverts commit c2b332f98a.
# Objective
- Expose the wgpu debug label on storage buffer types.
## Solution
🐄
- Add an optional cow static string and pass that to the label field of create_buffer_with_data
- This pattern is already used by Bevy for debug tags on bind group and layout descriptors.
---
Example Usage:
A buffer is given a label using the label function. Alternatively a buffer may be labeled when it is created if the default() convention is not used.
Here is the buffer appearing with the correct name in RenderDoc. Previously the buffer would have an anonymous name such as "Buffer223":
Co-authored-by: rebelroad-reinhart <reinhart@rebelroad.gg>
# Objective
- Improve performance when rendering text
## Solution
- While playing with example `many_buttons`, I noticed a lot of time was spent converting colours
- Investigating, the biggest culprit seems to be text colour. Each glyph in a text is an individual UI node for rendering, with a copy of the colour. Making the conversion to RGBA linear only once per text section reduces the number of conversion done once rendering.
- This improves FPS for example `many_buttons` from ~33 to ~42
- I did the same change for text 2d
# Objective
I found this small ux hiccup when writing the 0.8 blog post:
```rust
image.sampler = ImageSampler::Descriptor(ImageSampler::nearest_descriptor());
```
Not good!
## Solution
```rust
image.sampler = ImageSampler::nearest();
```
(there are Good Reasons to keep around the nearest_descriptor() constructor and I think it belongs on this type)
# Objective
`ReadOnlyWorldQuery` should have required `Self::ReadOnly = Self` so that calling `.iter()` on a readonly query is equivelent to calling `iter_mut()`.
## Solution
add `ReadOnly = Self` to the definition of `ReadOnlyWorldQuery`
---
## Changelog
ReadOnlyWorldQuery's `ReadOnly` assoc type is now always equal to `Self`
## Migration Guide
Make `Self::ReadOnly = Self` hold
# Objective
fix an error in shadow map indexing that occurs when point lights without shadows are used in conjunction with spotlights with shadows
## Solution
calculate point_light_count correctly
# Objective
Enable treating components and resources equally, which can
simplify the implementation of some systems where only the change
detection feature is relevant and not the kind of object (resource or
component).
## Solution
Implement `From<ResMut<T>>` and `From<NonSendMut<T>>` for
`Mut`. Since the 3 structs are similar, and only differ by their system
param role, the conversion is trivial.
---
## Changelog
Added - `From<ResMut>` and `From<NonSendMut>` for `Mut<T>`.
# Objective
- Even though it's marked as optional, it is no longer possible to not depend on `bevy_render` as it's a dependency of `bevy_scene`
## Solution
- Make `bevy_scene` optional
- For the minimalist among us, also make `bevy_asset` optional
# Objective
- Fix some typos
## Solution
For the first time in my life, I made a pull request to OSS.
Am I right?
Co-authored-by: eiei114 <60887155+eiei114@users.noreply.github.com>
# Objective
- `#![warn(missing_docs)]` was added to bevy_asset in #3536
- A method was not documented when targeting wasm
## Solution
- Add documentation for it
# Objective
Some generic types like `Option<T>`, `Vec<T>` and `HashMap<K, V>` implement `Reflect` when where their generic types `T`/`K`/`V` implement `Serialize + for<'de> Deserialize<'de>`.
This is so that in their `GetTypeRegistration` impl they can insert the `ReflectSerialize` and `ReflectDeserialize` type data structs.
This has the annoying side effect that if your struct contains a `Option<NonSerdeStruct>` you won't be able to derive reflect (https://github.com/bevyengine/bevy/issues/4054).
## Solution
- remove the `Serialize + Deserialize` bounds on wrapper types
- this means that `ReflectSerialize` and `ReflectDeserialize` will no longer be inserted even for `.register::<Option<DoesImplSerde>>()`
- add `register_type_data<T, D>` shorthand for `registry.get_mut(T).insert(D::from_type<T>())`
- require users to register their specific generic types **and the serde types** separately like
```rust
.register_type::<Option<String>>()
.register_type_data::<Option<String>, ReflectSerialize>()
.register_type_data::<Option<String>, ReflectDeserialize>()
```
I believe this is the best we can do for extensibility and convenience without specialization.
## Changelog
- `.register_type` for generic types like `Option<T>`, `Vec<T>`, `HashMap<K, V>` will no longer insert `ReflectSerialize` and `ReflectDeserialize` type data. Instead you need to register it separately for concrete generic types like so:
```rust
.register_type::<Option<String>>()
.register_type_data::<Option<String>, ReflectSerialize>()
.register_type_data::<Option<String>, ReflectDeserialize>()
```
TODO: more docs and tweaks to the scene example to demonstrate registering generic types.
# Objective
- wgpu 0.13 has validation to ensure that the width and height specified for a texture are both multiples of the respective block width and block height. This means validation fails for compressed textures with say a 4x4 block size, but non-modulo-4 image width/height.
## Solution
- Using `Extent3d`'s `physical_size()` method in the `dds` loader. It takes a `TextureFormat` argument and ensures the resolution is correct.
---
## Changelog
- Fixes: Validation failure for compressed textures stored in `dds` where the width/height are not a multiple of the block dimensions.
# Objective
the bevy pbr shader doesn't handle at all normal maps
if a mesh doesn't have backed tangents. This is a pitfall
(that I fell into) and needs to be documented.
# Solution
Document the behavior. (Also document a few other
`StandardMaterial` fields)
## Changelog
* Add documentation to `emissive`, `normal_map_texture` and `occlusion_texture` fields of `StandardMaterial`.
# Objective
I've found there is a duplicated line, probably left after some copy paste.
## Solution
- removed it
---
Co-authored-by: adsick <vadimgangsta73@gmail.com>
# Objective
UI nodes can be hidden by setting their `Visibility` property. Since #5310 was merged, this is now ergonomic to use, as visibility is now inherited.
However, UI nodes still receive (and store) interactions when hidden, resulting in surprising hidden state (and an inability to otherwise disable UI nodes.
## Solution
Fixes#5360.
I've updated the `ui_focus_system` to accomplish this in a minimally intrusive way, and updated the docs to match.
**NOTE:** I have not added automated tests to verify this behavior, as we do not currently have a good testing paradigm for `bevy_ui`. I'm not thrilled with that by any means, but I'm not sure fixing it is within scope.
## Paths not taken
### Separate `Disabled` component
This is a much larger and more controversial change, and not well-scoped to UI.
Furthermore, it is extremely rare that you want hidden UI elements to function: the most common cases are for things like changing tabs, collapsing elements or so on.
Splitting this behavior would be more complex, and substantially violate user expectations.
### A separate limbo world
Mentioned in the linked issue. Super cool, but all of the problems of the `Disabled` component solution with a whole new RFC-worth of complexity.
### Using change detection to reduce the amount of redundant work
Adds a lot of complexity for questionable performance gains. Likely involves a complete refactor of the entire system.
We simply don't have the tests or benchmarks here to justify this.
## Changelog
- UI nodes are now always in an `Interaction::None` state while they are hidden (via the `ComputedVisibility` component).
# Objective
- Fixes#5293
- UI nodes with a rotation that made the top left corner lower than the top right corner (z rotations greater than π/4) were culled
## Solution
- Do not cull nodes with a rotation, but don't do proper culling in this case
As a reminder, changing rotation and scale of UI nodes is not recommended as it won't impact layout. This is a quick fix but doesn't handle properly rotations and scale in clipping/culling. This would need a lot more work as mentioned here: c2b332f98a/crates/bevy_ui/src/render/mod.rs (L404-L405)
# Objective
I noticed while working on #5366 that the documentation for label types wasn't working correctly. Having experimented with this for a few weeks, I believe that generating docs in macros is more effort than it's worth.
## Solution
Add more boilerplate, copy-paste and edit the docs across types. This also lets us add custom doctests for specific types. Also, we don't need `concat_idents` as a dependency anymore.
# Objective
- Migrate changes from #3503.
## Solution
- Document `Size` and `UiRect`.
- I also removed the type alias from the `size_ops` test since it's unnecessary.
## Follow Up
After this change is merged I'd follow up with removing the generics from `Size` and `UiRect` since `Val` should be extensible enough. This was also discussed and decided on in #3503. let me know if this is not needed or wanted anymore!
# Objective
I want to use the `deno_runtime` crate in my game, but it has a conflict with the version of the `notify` crate that Bevy depends on.
## Solution
Updates the version of the `notify` crate the Bevy depends on.
If users try to implement a custom asset loader, they must manually import anyhow::error as it's used by the asset loader trait but not exported.
2b93ab5812/examples/asset/custom_asset.rs (L25)Fixes#3138
Co-authored-by: sark <sarkahn@hotmail.com>
# Objective
Creating UI elements is very boilerplate-y with lots of indentation.
This PR aims to reduce boilerplate around creating text elements.
## Changelog
* Renamed `Text::with_section` to `from_section`.
It no longer takes a `TextAlignment` as argument, as the vast majority of cases left it `Default::default()`.
* Added `Text::from_sections` which creates a `Text` from a list of `TextSections`.
Reduces line-count and reduces indentation by one level.
* Added `Text::with_alignment`.
A builder style method for setting the `TextAlignment` of a `Text`.
* Added `TextSection::new`.
Does not reduce line count, but reduces character count and made it easier to read. No more `.to_string()` calls!
* Added `TextSection::from_style` which creates an empty `TextSection` with a style.
No more empty strings! Reduces indentation.
* Added `TextAlignment::CENTER` and friends.
* Added methods to `TextBundle`. `from_section`, `from_sections`, `with_text_alignment` and `with_style`.
## Note for reviewers.
Because of the nature of these changes I recommend setting diff view to 'split'.
~~Look for the book icon~~ cog in the top-left of the Files changed tab.
Have fun reviewing ❤️
<sup> >:D </sup>
## Migration Guide
`Text::with_section` was renamed to `from_section` and no longer takes a `TextAlignment` as argument.
Use `with_alignment` to set the alignment instead.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Fix some small errors in the documentation of the `OwningPtr` struct.
## Solution
- Change comments with 4 slashes `////` to doc comments with 3 slashes `///`.
- Fix typos.
# Objective
Update the `calculate_bounds` system to update `Aabb`s
for entities who've either:
- gotten a new mesh
- had their mesh mutated
Fixes https://github.com/bevyengine/bevy/issues/4294.
## Solution
There are two commits here to address the two issues above:
### Commit 1
**This Commit**
Updates the `calculate_bounds` system to operate not only on entities
without `Aabb`s but also on entities whose `Handle<Mesh>` has changed.
**Why?**
So if an entity gets a new mesh, its associated `Aabb` is properly
recalculated.
**Questions**
- This type is getting pretty gnarly - should I extract some types?
- This system is public - should I add some quick docs while I'm here?
### Commit 2
**This Commit**
Updates `calculate_bounds` to update `Aabb`s of entities whose meshes
have been directly mutated.
**Why?**
So if an entity's mesh gets updated, its associated `Aabb` is properly
recalculated.
**Questions**
- I think we should be using `ahash`. Do we want to do that with a
direct `hashbrown` dependency or an `ahash` dependency that we
configure the `HashMap` with?
- There is an edge case of duplicates with `Vec<Entity>` in the
`HashMap`. If an entity gets its mesh handle changed and changed back
again it'll be added to the list twice. Do we want to use a `HashSet`
to avoid that? Or do a check in the list first (assuming iterating
over the `Vec` is faster and this edge case is rare)?
- There is an edge case where, if an entity gets a new mesh handle and
then its old mesh is updated, we'll update the entity's `Aabb` to the
new geometry of the _old_ mesh. Do we want to remove items from the
`Local<HashMap>` when handles change? Does the `Changed` event give us
the old mesh handle? If not we might need to have a
`HashMap<Entity, Handle<Mesh>>` or something so we can unlink entities
from mesh handles when the handle changes.
- I did the `zip()` with the two `HashMap` gets assuming those would
be faster than calculating the Aabb of the mesh (otherwise we could do
`meshes.get(mesh_handle).and_then(Mesh::compute_aabb).zip(entity_mesh_map...)`
or something). Is that assumption way off?
## Testing
I originally tried testing this with `bevy_mod_raycast` as mentioned in the
original issue but it seemed to work (maybe they are currently manually
updating the Aabbs?). I then tried doing it in 2D but it looks like
`Handle<Mesh>` is just for 3D. So I took [this example](https://github.com/bevyengine/bevy/blob/main/examples/3d/pbr.rs)
and added some systems to mutate/assign meshes:
<details>
<summary>Test Script</summary>
```rust
use bevy::prelude::*;
use bevy::render:📷:ScalingMode;
use bevy::render::primitives::Aabb;
/// Make sure we only mutate one mesh once.
#[derive(Eq, PartialEq, Clone, Debug, Default)]
struct MutateMeshState(bool);
/// Let's have a few global meshes that we can cycle between.
/// This way we can be assigned a new mesh, mutate the old one, and then get the old one assigned.
#[derive(Eq, PartialEq, Clone, Debug, Default)]
struct Meshes(Vec<Handle<Mesh>>);
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.init_resource::<MutateMeshState>()
.init_resource::<Meshes>()
.add_startup_system(setup)
.add_system(assign_new_mesh)
.add_system(show_aabbs.after(assign_new_mesh))
.add_system(mutate_meshes.after(show_aabbs))
.run();
}
fn setup(
mut commands: Commands,
mut meshes: ResMut<Assets<Mesh>>,
mut global_meshes: ResMut<Meshes>,
mut materials: ResMut<Assets<StandardMaterial>>,
) {
let m1 = meshes.add(Mesh::from(shape::Icosphere::default()));
let m2 = meshes.add(Mesh::from(shape::Icosphere {
radius: 0.90,
..Default::default()
}));
let m3 = meshes.add(Mesh::from(shape::Icosphere {
radius: 0.80,
..Default::default()
}));
global_meshes.0.push(m1.clone());
global_meshes.0.push(m2);
global_meshes.0.push(m3);
// add entities to the world
// sphere
commands.spawn_bundle(PbrBundle {
mesh: m1,
material: materials.add(StandardMaterial {
base_color: Color::hex("ffd891").unwrap(),
..default()
}),
..default()
});
// new 3d camera
commands.spawn_bundle(Camera3dBundle {
projection: OrthographicProjection {
scale: 3.0,
scaling_mode: ScalingMode::FixedVertical(1.0),
..default()
}
.into(),
..default()
});
// old 3d camera
// commands.spawn_bundle(OrthographicCameraBundle {
// transform: Transform::from_xyz(0.0, 0.0, 8.0).looking_at(Vec3::default(), Vec3::Y),
// orthographic_projection: OrthographicProjection {
// scale: 0.01,
// ..default()
// },
// ..OrthographicCameraBundle::new_3d()
// });
}
fn show_aabbs(query: Query<(Entity, &Handle<Mesh>, &Aabb)>) {
for thing in query.iter() {
println!("{thing:?}");
}
}
/// For testing the second part - mutating a mesh.
///
/// Without the fix we should see this mutate an old mesh and it affects the new mesh that the
/// entity currently has.
/// With the fix, the mutation doesn't affect anything until the entity is reassigned the old mesh.
fn mutate_meshes(
mut meshes: ResMut<Assets<Mesh>>,
time: Res<Time>,
global_meshes: Res<Meshes>,
mut mutate_mesh_state: ResMut<MutateMeshState>,
) {
let mutated = mutate_mesh_state.0;
if time.seconds_since_startup() > 4.5 && !mutated {
println!("Mutating {:?}", global_meshes.0[0]);
let m = meshes.get_mut(&global_meshes.0[0]).unwrap();
let mut p = m.attribute(Mesh::ATTRIBUTE_POSITION).unwrap().clone();
use bevy::render::mesh::VertexAttributeValues;
match &mut p {
VertexAttributeValues::Float32x3(v) => {
v[0] = [10.0, 10.0, 10.0];
}
_ => unreachable!(),
}
m.insert_attribute(Mesh::ATTRIBUTE_POSITION, p);
mutate_mesh_state.0 = true;
}
}
/// For testing the first part - assigning a new handle.
fn assign_new_mesh(
mut query: Query<&mut Handle<Mesh>, With<Aabb>>,
time: Res<Time>,
global_meshes: Res<Meshes>,
) {
let s = time.seconds_since_startup() as usize;
let idx = s % global_meshes.0.len();
for mut handle in query.iter_mut() {
*handle = global_meshes.0[idx].clone_weak();
}
}
```
</details>
## Changelog
### Fixed
Entity `Aabb`s not updating when meshes are mutated or re-assigned.
