# Objective
- Fix the `borders`, `ui` and `text_wrap_debug` examples.
## Solution
- Swap `TransparentUi` to use a stable sort
---
This is the smallest change to fix the examples but ideally this is
fixed by setting better sort keys for the UI elements such that we can
swap back to an unstable sort.
# Objective
- break up large build_schedule system to make it easier to read
- Clean up related error messages.
- I have a follow up PR that adds the schedule name to the error
messages, but wanted to break this up from that.
## Changelog
- refactor `build_schedule` to be easier to read
## Sample Error Messages
Dependency Cycle
```text
thread 'main' panicked at 'System dependencies contain cycle(s).
schedule has 1 before/after cycle(s):
cycle 1: system set 'A' must run before itself
system set 'A'
... which must run before system set 'B'
... which must run before system set 'A'
', crates\bevy_ecs\src\schedule\schedule.rs:228:13
```
```text
thread 'main' panicked at 'System dependencies contain cycle(s).
schedule has 1 before/after cycle(s):
cycle 1: system 'foo' must run before itself
system 'foo'
... which must run before system 'bar'
... which must run before system 'foo'
', crates\bevy_ecs\src\schedule\schedule.rs:228:13
```
Hierarchy Cycle
```text
thread 'main' panicked at 'System set hierarchy contains cycle(s).
schedule has 1 in_set cycle(s):
cycle 1: set 'A' contains itself
set 'A'
... which contains set 'B'
... which contains set 'A'
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
System Type Set
```text
thread 'main' panicked at 'Tried to order against `SystemTypeSet(fn foo())` in a schedule that has more than one `SystemTypeSet(fn foo())` instance. `SystemTypeSet(fn foo())` is a `SystemTypeSet` and cannot be used for ordering if ambiguous. Use a different set without this restriction.', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Hierarchy Redundancy
```text
thread 'main' panicked at 'System set hierarchy contains redundant edges.
hierarchy contains redundant edge(s) -- system set 'X' cannot be child of set 'A', longer path exists
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Systems have ordering but interset
```text
thread 'main' panicked at '`A` and `C` have a `before`-`after` relationship (which may be transitive) but share systems.', crates\bevy_ecs\src\schedule\schedule.rs:227:51
```
Cross Dependency
```text
thread 'main' panicked at '`A` and `B` have both `in_set` and `before`-`after` relationships (these might be transitive). This combination is unsolvable as a system cannot run before or after a set it belongs to.', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Ambiguity
```text
thread 'main' panicked at 'Systems with conflicting access have indeterminate run order.
1 pairs of systems with conflicting data access have indeterminate execution order. Consider adding `before`, `after`, or `ambiguous_with` relationships between these:
-- res_mut and res_ref
conflict on: ["bevymark::ambiguity::X"]
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
# Objective
Sometimes you want to create a plugin with a custom run condition. In a
function, you take the `Condition` trait and then make a
`BoxedCondition` from it to store it. And then you want to add that
condition to a system, but you can't, because there is only the `run_if`
function available which takes `impl Condition<M>` instead of
`BoxedCondition`. So you have to create a wrapper type for the
`BoxedCondition` and implement the `System` and `ReadOnlySystem` traits
for the wrapper (Like it's done in the picture below). It's very
inconvenient and boilerplate. But there is an easy solution for that:
make the `run_if_inner` system that takes a `BoxedCondition` public.
Also, it makes sense to make `in_set_inner` function public as well with
the same motivation.
A chunk of the source code of the `bevy-inspector-egui` crate.
## Solution
Make `run_if_inner` function public.
Rename `run_if_inner` to `run_if_dyn`.
Make `in_set_inner` function public.
Rename `in_set_inner` to `in_set_dyn`.
## Changelog
Changed visibility of `run_if_inner` from `pub(crate)` to `pub`.
Renamed `run_if_inner` to `run_if_dyn`.
Changed visibility of `in_set_inner` from `pub(crate)` to `pub`.
Renamed `in_set_inner` to `in_set_dyn`.
## Migration Guide
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
This is a continuation of this PR: #8062
# Objective
- Reorder render schedule sets to allow data preparation when phase item
order is known to support improved batching
- Part of the batching/instancing etc plan from here:
https://github.com/bevyengine/bevy/issues/89#issuecomment-1379249074
- The original idea came from @inodentry and proved to be a good one.
Thanks!
- Refactor `bevy_sprite` and `bevy_ui` to take advantage of the new
ordering
## Solution
- Move `Prepare` and `PrepareFlush` after `PhaseSortFlush`
- Add a `PrepareAssets` set that runs in parallel with other systems and
sets in the render schedule.
- Put prepare_assets systems in the `PrepareAssets` set
- If explicit dependencies are needed on Mesh or Material RenderAssets
then depend on the appropriate system.
- Add `ManageViews` and `ManageViewsFlush` sets between
`ExtractCommands` and Queue
- Move `queue_mesh*_bind_group` to the Prepare stage
- Rename them to `prepare_`
- Put systems that prepare resources (buffers, textures, etc.) into a
`PrepareResources` set inside `Prepare`
- Put the `prepare_..._bind_group` systems into a `PrepareBindGroup` set
after `PrepareResources`
- Move `prepare_lights` to the `ManageViews` set
- `prepare_lights` creates views and this must happen before `Queue`
- This system needs refactoring to stop handling all responsibilities
- Gather lights, sort, and create shadow map views. Store sorted light
entities in a resource
- Remove `BatchedPhaseItem`
- Replace `batch_range` with `batch_size` representing how many items to
skip after rendering the item or to skip the item entirely if
`batch_size` is 0.
- `queue_sprites` has been split into `queue_sprites` for queueing phase
items and `prepare_sprites` for batching after the `PhaseSort`
- `PhaseItem`s are still inserted in `queue_sprites`
- After sorting adjacent compatible sprite phase items are accumulated
into `SpriteBatch` components on the first entity of each batch,
containing a range of vertex indices. The associated `PhaseItem`'s
`batch_size` is updated appropriately.
- `SpriteBatch` items are then drawn skipping over the other items in
the batch based on the value in `batch_size`
- A very similar refactor was performed on `bevy_ui`
---
## Changelog
Changed:
- Reordered and reworked render app schedule sets. The main change is
that data is extracted, queued, sorted, and then prepared when the order
of data is known.
- Refactor `bevy_sprite` and `bevy_ui` to take advantage of the
reordering.
## Migration Guide
- Assets such as materials and meshes should now be created in
`PrepareAssets` e.g. `prepare_assets<Mesh>`
- Queueing entities to `RenderPhase`s continues to be done in `Queue`
e.g. `queue_sprites`
- Preparing resources (textures, buffers, etc.) should now be done in
`PrepareResources`, e.g. `prepare_prepass_textures`,
`prepare_mesh_uniforms`
- Prepare bind groups should now be done in `PrepareBindGroups` e.g.
`prepare_mesh_bind_group`
- Any batching or instancing can now be done in `Prepare` where the
order of the phase items is known e.g. `prepare_sprites`
## Next Steps
- Introduce some generic mechanism to ensure items that can be batched
are grouped in the phase item order, currently you could easily have
`[sprite at z 0, mesh at z 0, sprite at z 0]` preventing batching.
- Investigate improved orderings for building the MeshUniform buffer
- Implementing batching across the rest of bevy
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
* `Local` and `SystemName` implement `Debug` manually, but they could
derive it.
* `QueryState` and `dyn System` have unconventional debug formatting.
# Objective
Fixes#9509
## Solution
We use the assumption, that enum types are uppercase in contrast to
module names.
[`collapse_type_name`](crates/bevy_util/src/short_names) is now
retaining the second last segment, if it starts with a uppercase
character.
---------
Co-authored-by: Emi <emanuel.boehm@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Fixes#9533
## Solution
* Added `Val::ZERO` as a constant which is defined as `Val::Px(0.)`.
* Added manual `PartialEq` implementation for `Val` which allows any
zero value to equal any other zero value. E.g., `Val::Px(0.) ==
Val::Percent(0.)` etc. This is technically a breaking change, as
`Val::Px(0.) == Val::Percent(0.)` now equals `true` instead of `false`
(as an example)
* Replaced instances of `Val::Px(0.)`, `Val::Percent(0.)`, etc. with
`Val::ZERO`
* Fixed `bevy_ui::layout::convert::tests::test_convert_from` test to
account for Taffy not equating `Points(0.)` and `Percent(0.)`. These
tests now use `assert_eq!(...)` instead of `assert!(matches!(...))`
which gives easier to diagnose error messages.
# Objective
All delimiter symbols used by the path parser are ASCII, this means we
can entirely ignore UTF8 handling. This may improve performance.
## Solution
Instead of storing the path as an `&str` + the parser offset, and
reading the path using `&self.path[self.offset..]`, we store the parser
state in a `&[u8]`. This allows two optimizations:
1. Avoid UTF8 checking on `&self.path[self.offset..]`
2. Avoid any kind of bound checking, since the length of what is left to
read is stored in the `&[u8]`'s reference metadata, and is assumed valid
by the compiler.
This is a major improvement when comparing to the previous parser.
1. `access_following` and `next_token` now inline in `PathParser::next`
2. Benchmarking show a 20% performance increase (#9364)
Please note that while we ignore UTF-8 handling, **utf-8 is still
supported**. This is because we only handle "at the edges" what happens
exactly before and after a recognized `SYMBOL`. utf-8 is handled
transparently beyond that.
# Objective
- Unify the `ParsedPath` and `GetPath` APIs. They weirdly didn't play
well together.
- Make `ParsedPath` and `GetPath` API easier to use
## Solution
- Add the `ReflectPath` trait.
- `GetPath` methods now accept an `impl ReflectPath<'a>` instead of a
`&'a str`, this mean it also can accepts a `&ParsedPath`
- Make `GetPath: Reflect` and use default impl for `Reflect` types.
- Add `GetPath` and `ReflectPath` to the `bevy_reflect` prelude
---
## Changelog
- Add the `ReflectPath` trait.
- `GetPath` methods now accept an `impl ReflectPath<'a>` instead of a
`&'a str`, this mean it also can accept a `&ParsedPath`
- Make `GetPath: Reflect` and use default impl for `Reflect` types.
- Add `GetPath` and `ReflectPath` to the `bevy_reflect` prelude
## Migration Guide
`GetPath` now requires `Reflect`. This reduces a lot of boilerplate on
bevy's side. If you were implementing manually `GetPath` on your own
type, please get in touch!
`ParsedPath::element[_mut]` isn't an inherent method of `ParsedPath`,
you must now import `ReflectPath`. This is only relevant if you weren't
importing the bevy prelude.
```diff
-use bevy::reflect::ParsedPath;
+use bevy::reflect::{ParsedPath, ReflectPath};
parsed_path.element(reflect_type).unwrap()
parsed_path.element(reflect_type).unwrap()
# Objective
We want to measure performance on path reflection parsing.
## Solution
Benchmark path-based reflection:
- Add a benchmark for `ParsedPath::parse`
It's fairly noisy, this is why I added the 3% threshold.
Ideally we would fix the noisiness though. Supposedly I'm seeding the
RNG correctly, so there shouldn't be much observable variance. Maybe
someone can help spot the issue.
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fixes#9552
## Solution
- Only n_pixels bytes of data was being copied instead of 1 byte per
component, i.e. n_pixels * 4
---
## Changelog
- Fixed: loading of Rgb8 ktx2 files.
# Objective
- Fix blender gltf imports with emissive materials
- Progress towards https://github.com/bevyengine/bevy/issues/5178
## Solution
- Upgrade to gltf-rs 1.3 supporiting
[KHR_materials_emissive_strength](https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_emissive_strength/README.md)
---
## Changelog
- GLTF files using `emissiveStrength` (such as those exported by
blender) are now supported
## Migration Guide
- The GLTF asset loader will now factor in `emissiveStrength` when
converting to Bevy's `StandardMaterial::emissive`. Blender will export
emissive materials using this field. Remove the field from your GLTF
files or manually modify your materials post-asset-load to match how
Bevy would load these files in previous versions.
# Objective
Fixes incorrect docs in `bevy_ui` for `JustifyItems` and `JustifySelf`.
## Solution
`JustifyItems` and `JustifySelf` target the main axis and not the cross
axis.
# Objective
`round_ties_up` checks the predicate:
```rust
0. <= value || value.fract() != 0.5
```
which is meant to determine if the value is negative with a fractional
part of `0.5`.
However given a negative value, `fract` returns a negative fraction so
the predicate is true for all numeric values and `ceil` is never called.
## Solution
Changed the predicate to `value.fract() != -0.5` and added a test.
Also improved the comments a bit.
# Objective
Fix a few issues with some of the examples:
* Root UI nodes have an implicit parent with `FlexDirection::Row` and
`AlignItems::Stretch` set. Only a width constraint is needed to fill the
viewport. Specifying ```height: Val::Percent(100.)``` is unnecessary and
can cause confusing overflow behaviour.
* The default for position and size constraint properties is
`Val::Auto`. Setting `left: Val::Auto`, `max_height: Val::Auto`, etc
does nothing.
## Solution
Delete those lines. There should be no observable differences in the
behaviours of any of the examples.
Also changed a padding setting in the `flex_layout` example to use the
`axes` helper function.
# Objective
In #9355 was added an import using bevy_internal.
This change the import to use `bevy::window` instead of a
`bevy_internal` to run the example outside of the bevy repo.
# Objective
- A few of the `const DEFAULT` properties of the grid feature are not
marked as pub. This is an issue because it means you can't have a
`const` `Style` declaration anymore. Most of the existing properties are
already pub.
## Solution
- add the missing pub
# Objective
- Wireframe currently don't display since #9416
- There is an error
```
2023-08-20T10:06:54.190347Z ERROR bevy_render::render_resource::pipeline_cache: failed to process shader:
error: no definition in scope for identifier: 'vertex_no_morph'
┌─ crates/bevy_pbr/src/render/wireframe.wgsl:26:94
│
26 │ let model = bevy_pbr::mesh_functions::get_model_matrix(vertex_no_morph.instance_index);
│ ^^^^^^^^^^^^^^^ unknown identifier
│
= no definition in scope for identifier: 'vertex_no_morph'
```
## Solution
- Use the correct identifier
# Objective
- Resolves https://github.com/bevyengine/bevy/issues/9440
## Solution
- Remove the doc string mentioning the position of a `NodeBundle`, since
the doc string for the `style` component already explains this ability.
# Objective
There is a `bevy_dylib` feature that cargo automatically creates due to
the bevy_dylib crate being optional.
This can be a footgun as I think we want users to always use the
`dynamic_linking` feature for this. For example `bevy_dylib` was used in
[ridiculous_bevy_hot_reloading:lib.rs#L93](400099bcc1/src/lib.rs (L93))
and since I was using dynamic_linking it ended up hot reloading with a
slightly different configured library causing hot reloading to fail.
## Solution
Use "dep:" syntax in the `dynamic_linking` feature to prevent bevy_dylib
automatically becoming a cargo feature. This is documented here:
https://doc.rust-lang.org/cargo/reference/features.html#optional-dependencies
It will now raise this error when you try to compile with the bevy_dylib
feature:
> error: Package `bevy v0.12.0-dev (C:\Users\Paul\Projects\Rust\bevy)`
does not have feature `bevy_dylib`. It has an optional dependency with
that name, but that dependency uses the "dep:" syntax in the features
table, so it does not have an implicit feature with that name.
---
## Changelog
`bevy_dylib` is no longer a feature
## Migration Guide
If you were using Bevy's `bevy_dylib` feature, use Bevy's
`dynamic_linking` feature instead.
```shell
# 0.11
cargo run --features bevy/bevy_dylib
# 0.12
cargo run --features bevy/dynamic_linking
```
```toml
[dependencies]
# 0.11
bevy = { version = "0.11", features = ["bevy_dylib"] }
# 0.12
bevy = { version = "0.12", features = ["dynamic_linking"] }
```
# Objective
- When spawning a window, it will be white until the GPU is ready to
draw the app. To avoid this, we can make the window invisible and then
make it visible once the gpu is ready. Unfortunately, the visible flag
is not available to users.
## Solution
- Let users change the visible flag
## Notes
This is only user controlled. It would be nice if it was done
automatically by bevy instead but I want to keep this PR simple.
# Objective
PR #6360 changed `TaskPoolOptions` so it is no longer used as a
Resource, but didn't remove the `Resource` derive.
## Solution
Remove the Resource derive from `TaskPoolOptions`, as it is no longer
needed. Also add a Debug derive, because it didn't have it before.
---
## Changelog
- `TaskPoolOptions` no longer derives Resource, and `TaskPoolOptions` &
`TaskPoolThreadAssignmentPolicy` now derive Debug.
## Migration Guide
If for some reason anyone is still using `TaskPoolOptions` as a
Resource, they would now have to use a wrapper type:
```rust
#[derive(Resource)]
pub struct MyTaskPoolOptions(pub TaskPoolOptions);
```
# Objective
Add `GamepadButtonInput` event
Resolves#8988
## Solution
- Add `GamepadButtonInput` type
- Emit `GamepadButtonInput` events whenever `Input<GamepadButton>` is
written to
- Update example
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes#9488
## Solution
Set point light radius to always be 0.0. Reading this value from glTF
would require using application specific extras property.
---
## Changelog
### Fixed
- #9488 Point Lights use Range for Radius when importing from GLTF
# Objective
- Example execution on linux/vulkan on CI is segfaulting for unclear
reasons
- This makes a lot of noise on PRs
## Solution
- Switch example execution on Linux to validation jobs (on PR merged).
It will still crash but not block merging, and we'll know when it's
fixed
- Switch example execution on Windows to CI jobs (on PR push). It's a
bit longer than on Linux but provides a useful status
- Disable job commenting on PR with job execution to reduce noise
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Allow users to specify the power preference when selecting a wgpu
adapter, which is useful for testing or workaround purposes, and makes
the behaviour consistent with the already present check for
`WGPU_BACKEND`.
## Solution
In `WgpuSettings::default()`, allow users to specify the
`WGPU_POWER_PREF` to affect the wgpu adapter choice.
# Objective
fix#9452
when multiple assets are queued to a preregistered loader, only one gets
unblocked when the real loader is registered.
## Solution
i thought async_channel receivers worked like broadcast channels, but in
fact the notification is only received by a single receiver, so only a
single waiting asset is unblocked. close the sender instead so that all
blocked receivers are unblocked.
If a line has one point behind the camera(near plane) then it would
deform or, if the `depth_bias` setting was set to a negative value,
disappear.
## Solution
The issue is that performing a perspective divide does not work
correctly for points behind the near plane and a perspective divide is
used inside the shader to define the line width in screen space.
The solution is to perform near plane clipping manually inside the
shader before the perspective divide is done.
# Objective
Fixes#9455
This change has probably been forgotten in
https://github.com/bevyengine/bevy/pull/8306.
## Solution
Remove the inversion of the Y axis when propagates window change back to
winit.
# Objective
Inconvenient initialization of `UiScale`
## Solution
Change `UiScale` to a tuple struct
## Migration Guide
Replace initialization of `UiScale` like ```UiScale { scale: 1.0 }```
with ```UiScale(1.0)```
# Objective
- Fixes part of #9021
## Solution
- Joint mesh are in format `Unorm8x4` in some gltf file, but Bevy
expects a `Float32x4`. Converts them. Also converts `Unorm16x4`
- According to gltf spec:
https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html#skinned-mesh-attributes
> WEIGHTS_n: float, or normalized unsigned byte, or normalized unsigned
short
# Objective
Fix#9089
## Solution
Don't try to draw lines with less than 2 vertices. These would not be
visible either way.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Currently, (AFAIC, accidentally) after registering an event for a
Gilrs button event, we ignore all subsequent events for the same button
in the same frame, because we don't update our filter. This is rare, but
I noticed it while adding gamepad support to a terminal app rendering at
15fps.
- Related to #4664, but does not quite fix it.
## Solution
- Move the edit to the `Axis<GamepadButton>` resource to when we read
the events from Gilrs.
# Objective
Closes#9115, replaces #9117.
## Solution
Emit event when scene is ready.
---
## Changelog
### Added
- `SceneInstanceReady` event when scene becomes ready.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/9250
## Changelog
- Move scene spawner systems to a new SpawnScene schedule which is after
Update and before PostUpdate (schedule order:
[PreUpdate][Update][SpawnScene][PostUpdate])
## Migration Guide
- Move scene spawner systems to a new SpawnScene schedule which is after
Update and before PostUpdate (schedule order:
[PreUpdate][Update][SpawnScene][PostUpdate]), you might remove system
ordering code related to scene spawning as the execution order has been
guaranteed by bevy engine.
---------
Co-authored-by: Hennadii Chernyshchyk <genaloner@gmail.com>
Updates the requirements on
[tracy-client](https://github.com/nagisa/rust_tracy_client) to permit
the latest version.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f38da93ff1"><code>f38da93</code></a>
Test with 1.63.0 for MSRV</li>
<li><a
href="3621e20ccd"><code>3621e20</code></a>
tracing-client-sys: 0.21.1</li>
<li><a
href="bccf04b152"><code>bccf04b</code></a>
tracing-tracy: 0.10.3</li>
<li><a
href="bff27b5218"><code>bff27b5</code></a>
tracy-client: 0.15.2 -> 0.16.0 + fix auto update</li>
<li><a
href="9ed943bd6b"><code>9ed943b</code></a>
Add safe GPU API</li>
<li><a
href="60443cc55c"><code>60443cc</code></a>
Benches fell out of sync</li>
<li><a
href="c346a10998"><code>c346a10</code></a>
Fix version table typo</li>
<li><a
href="0763d2d16c"><code>0763d2d</code></a>
Bump MSRV to 1.60.0</li>
<li><a
href="d483998d48"><code>d483998</code></a>
Update Tracy client bindings to v0.9.1</li>
<li><a
href="dce363444f"><code>dce3634</code></a>
client-sys: 0.20.0, client: 0.15.1, tracing: 0.10.2</li>
<li>Additional commits viewable in <a
href="https://github.com/nagisa/rust_tracy_client/compare/tracy-client-v0.15.0...tracy-client-v0.16.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
