# Objective
> This is a revival of #1347. Credit for the original PR should go to @Davier.
Currently, enums are treated as `ReflectRef::Value` types by `bevy_reflect`. Obviously, there needs to be better a better representation for enums using the reflection API.
## Solution
Based on prior work from @Davier, an `Enum` trait has been added as well as the ability to automatically implement it via the `Reflect` derive macro. This allows enums to be expressed dynamically:
```rust
#[derive(Reflect)]
enum Foo {
A,
B(usize),
C { value: f32 },
}
let mut foo = Foo::B(123);
assert_eq!("B", foo.variant_name());
assert_eq!(1, foo.field_len());
let new_value = DynamicEnum::from(Foo::C { value: 1.23 });
foo.apply(&new_value);
assert_eq!(Foo::C{value: 1.23}, foo);
```
### Features
#### Derive Macro
Use the `#[derive(Reflect)]` macro to automatically implement the `Enum` trait for enum definitions. Optionally, you can use `#[reflect(ignore)]` with both variants and variant fields, just like you can with structs. These ignored items will not be considered as part of the reflection and cannot be accessed via reflection.
```rust
#[derive(Reflect)]
enum TestEnum {
A,
// Uncomment to ignore all of `B`
// #[reflect(ignore)]
B(usize),
C {
// Uncomment to ignore only field `foo` of `C`
// #[reflect(ignore)]
foo: f32,
bar: bool,
},
}
```
#### Dynamic Enums
Enums may be created/represented dynamically via the `DynamicEnum` struct. The main purpose of this struct is to allow enums to be deserialized into a partial state and to allow dynamic patching. In order to ensure conversion from a `DynamicEnum` to a concrete enum type goes smoothly, be sure to add `FromReflect` to your derive macro.
```rust
let mut value = TestEnum::A;
// Create from a concrete instance
let dyn_enum = DynamicEnum::from(TestEnum::B(123));
value.apply(&dyn_enum);
assert_eq!(TestEnum::B(123), value);
// Create a purely dynamic instance
let dyn_enum = DynamicEnum::new("TestEnum", "A", ());
value.apply(&dyn_enum);
assert_eq!(TestEnum::A, value);
```
#### Variants
An enum value is always represented as one of its variants— never the enum in its entirety.
```rust
let value = TestEnum::A;
assert_eq!("A", value.variant_name());
// Since we are using the `A` variant, we cannot also be the `B` variant
assert_ne!("B", value.variant_name());
```
All variant types are representable within the `Enum` trait: unit, struct, and tuple.
You can get the current type like:
```rust
match value.variant_type() {
VariantType::Unit => println!("A unit variant!"),
VariantType::Struct => println!("A struct variant!"),
VariantType::Tuple => println!("A tuple variant!"),
}
```
> Notice that they don't contain any values representing the fields. These are purely tags.
If a variant has them, you can access the fields as well:
```rust
let mut value = TestEnum::C {
foo: 1.23,
bar: false
};
// Read/write specific fields
*value.field_mut("bar").unwrap() = true;
// Iterate over the entire collection of fields
for field in value.iter_fields() {
println!("{} = {:?}", field.name(), field.value());
}
```
#### Variant Swapping
It might seem odd to group all variant types under a single trait (why allow `iter_fields` on a unit variant?), but the reason this was done ~~is to easily allow *variant swapping*.~~ As I was recently drafting up the **Design Decisions** section, I discovered that other solutions could have been made to work with variant swapping. So while there are reasons to keep the all-in-one approach, variant swapping is _not_ one of them.
```rust
let mut value: Box<dyn Enum> = Box::new(TestEnum::A);
value.set(Box::new(TestEnum::B(123))).unwrap();
```
#### Serialization
Enums can be serialized and deserialized via reflection without needing to implement `Serialize` or `Deserialize` themselves (which can save thousands of lines of generated code). Below are the ways an enum can be serialized.
> Note, like the rest of reflection-based serialization, the order of the keys in these representations is important!
##### Unit
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "A"
}
}
```
##### Tuple
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "B",
"tuple": [
{
"type": "usize",
"value": 123
}
]
}
}
```
<details>
<summary>Effects on Option</summary>
This ends up making `Option` look a little ugly:
```json
{
"type": "core::option::Option<usize>",
"enum": {
"variant": "Some",
"tuple": [
{
"type": "usize",
"value": 123
}
]
}
}
```
</details>
##### Struct
```json
{
"type": "my_crate::TestEnum",
"enum": {
"variant": "C",
"struct": {
"foo": {
"type": "f32",
"value": 1.23
},
"bar": {
"type": "bool",
"value": false
}
}
}
}
```
## Design Decisions
<details>
<summary><strong>View Section</strong></summary>
This section is here to provide some context for why certain decisions were made for this PR, alternatives that could have been used instead, and what could be improved upon in the future.
### Variant Representation
One of the biggest decisions was to decide on how to represent variants. The current design uses a "all-in-one" design where unit, tuple, and struct variants are all simultaneously represented by the `Enum` trait. This is not the only way it could have been done, though.
#### Alternatives
##### 1. Variant Traits
One way of representing variants would be to define traits for each variant, implementing them whenever an enum featured at least one instance of them. This would allow us to define variants like:
```rust
pub trait Enum: Reflect {
fn variant(&self) -> Variant;
}
pub enum Variant<'a> {
Unit,
Tuple(&'a dyn TupleVariant),
Struct(&'a dyn StructVariant),
}
pub trait TupleVariant {
fn field_len(&self) -> usize;
// ...
}
```
And then do things like:
```rust
fn get_tuple_len(foo: &dyn Enum) -> usize {
match foo.variant() {
Variant::Tuple(tuple) => tuple.field_len(),
_ => panic!("not a tuple variant!")
}
}
```
The reason this PR does not go with this approach is because of the fact that variants are not separate types. In other words, we cannot implement traits on specific variants— these cover the *entire* enum. This means we offer an easy footgun:
```rust
let foo: Option<i32> = None;
let my_enum = Box::new(foo) as Box<dyn TupleVariant>;
```
Here, `my_enum` contains `foo`, which is a unit variant. However, since we need to implement `TupleVariant` for `Option` as a whole, it's possible to perform such a cast. This is obviously wrong, but could easily go unnoticed. So unfortunately, this makes it not a good candidate for representing variants.
##### 2. Variant Structs
To get around the issue of traits necessarily needing to apply to both the enum and its variants, we could instead use structs that are created on a per-variant basis. This was also considered but was ultimately [[removed](71d27ab3c6) due to concerns about allocations.
Each variant struct would probably look something like:
```rust
pub trait Enum: Reflect {
fn variant_mut(&self) -> VariantMut;
}
pub enum VariantMut<'a> {
Unit,
Tuple(TupleVariantMut),
Struct(StructVariantMut),
}
struct StructVariantMut<'a> {
fields: Vec<&'a mut dyn Reflect>,
field_indices: HashMap<Cow<'static, str>, usize>
}
```
This allows us to isolate struct variants into their own defined struct and define methods specifically for their use. It also prevents users from casting to it since it's not a trait. However, this is not an optimal solution. Both `field_indices` and `fields` will require an allocation (remember, a `Box<[T]>` still requires a `Vec<T>` in order to be constructed). This *might* be a problem if called frequently enough.
##### 3. Generated Structs
The original design, implemented by @Davier, instead generates structs specific for each variant. So if we had a variant path like `Foo::Bar`, we'd generate a struct named `FooBarWrapper`. This would be newtyped around the original enum and forward tuple or struct methods to the enum with the chosen variant.
Because it involved using the `Tuple` and `Struct` traits (which are also both bound on `Reflect`), this meant a bit more code had to be generated. For a single struct variant with one field, the generated code amounted to ~110LoC. However, each new field added to that variant only added ~6 more LoC.
In order to work properly, the enum had to be transmuted to the generated struct:
```rust
fn variant(&self) -> crate::EnumVariant<'_> {
match self {
Foo::Bar {value: i32} => {
let wrapper_ref = unsafe {
std::mem::transmute::<&Self, &FooBarWrapper>(self)
};
crate::EnumVariant::Struct(wrapper_ref as &dyn crate::Struct)
}
}
}
```
This works because `FooBarWrapper` is defined as `repr(transparent)`.
Out of all the alternatives, this would probably be the one most likely to be used again in the future. The reasons for why this PR did not continue to use it was because:
* To reduce generated code (which would hopefully speed up compile times)
* To avoid cluttering the code with generated structs not visible to the user
* To keep bevy_reflect simple and extensible (these generated structs act as proxies and might not play well with current or future systems)
* To avoid additional unsafe blocks
* My own misunderstanding of @Davier's code
That last point is obviously on me. I misjudged the code to be too unsafe and unable to handle variant swapping (which it probably could) when I was rebasing it. Looking over it again when writing up this whole section, I see that it was actually a pretty clever way of handling variant representation.
#### Benefits of All-in-One
As stated before, the current implementation uses an all-in-one approach. All variants are capable of containing fields as far as `Enum` is concerned. This provides a few benefits that the alternatives do not (reduced indirection, safer code, etc.).
The biggest benefit, though, is direct field access. Rather than forcing users to have to go through pattern matching, we grant direct access to the fields contained by the current variant. The reason we can do this is because all of the pattern matching happens internally. Getting the field at index `2` will automatically return `Some(...)` for the current variant if it has a field at that index or `None` if it doesn't (or can't).
This could be useful for scenarios where the variant has already been verified or just set/swapped (or even where the type of variant doesn't matter):
```rust
let dyn_enum: &mut dyn Enum = &mut Foo::Bar {value: 123};
// We know it's the `Bar` variant
let field = dyn_enum.field("value").unwrap();
```
Reflection is not a type-safe abstraction— almost every return value is wrapped in `Option<...>`. There are plenty of places to check and recheck that a value is what Reflect says it is. Forcing users to have to go through `match` each time they want to access a field might just be an extra step among dozens of other verification processes.
Some might disagree, but ultimately, my view is that the benefit here is an improvement to the ergonomics and usability of reflected enums.
</details>
---
## Changelog
### Added
* Added `Enum` trait
* Added `Enum` impl to `Reflect` derive macro
* Added `DynamicEnum` struct
* Added `DynamicVariant`
* Added `EnumInfo`
* Added `VariantInfo`
* Added `StructVariantInfo`
* Added `TupleVariantInfo`
* Added `UnitVariantInfo`
* Added serializtion/deserialization support for enums
* Added `EnumSerializer`
* Added `VariantType`
* Added `VariantFieldIter`
* Added `VariantField`
* Added `enum_partial_eq(...)`
* Added `enum_hash(...)`
### Changed
* `Option<T>` now implements `Enum`
* `bevy_window` now depends on `bevy_reflect`
* Implemented `Reflect` and `FromReflect` for `WindowId`
* Derive `FromReflect` on `PerspectiveProjection`
* Derive `FromReflect` on `OrthographicProjection`
* Derive `FromReflect` on `WindowOrigin`
* Derive `FromReflect` on `ScalingMode`
* Derive `FromReflect` on `DepthCalculation`
## Migration Guide
* Enums no longer need to be treated as values and usages of `#[reflect_value(...)]` can be removed or replaced by `#[reflect(...)]`
* Enums (including `Option<T>`) now take a different format when serializing. The format is described above, but this may cause issues for existing scenes that make use of enums.
---
Also shout out to @nicopap for helping clean up some of the code here! It's a big feature so help like this is really appreciated!
Co-authored-by: Gino Valente <gino.valente.code@gmail.com>
# Objective
- Nightly clippy lints should be fixed before they get stable and break CI
## Solution
- fix new clippy lints
- ignore `significant_drop_in_scrutinee` since it isn't relevant in our loop https://github.com/rust-lang/rust-clippy/issues/8987
```rust
for line in io::stdin().lines() {
...
}
```
Co-authored-by: Jakob Hellermann <hellermann@sipgate.de>
# Objective
Provide a starting point for #3951, or a partial solution.
Providing a few comment blocks to discuss, and hopefully find better one in the process.
## Solution
Since I am pretty new to pretty much anything in this context, I figured I'd just start with a draft for some file level doc blocks. For some of them I found more relevant details (or at least things I considered interessting), for some others there is less.
## Changelog
- Moved some existing comments from main() functions in the 2d examples to the file header level
- Wrote some more comment blocks for most other 2d examples
TODO:
- [x] 2d/sprite_sheet, wasnt able to come up with something good yet
- [x] all other example groups...
Also: Please let me know if the commit style is okay, or to verbose. I could certainly squash these things, or add more details if needed.
I also hope its okay to raise this PR this early, with just a few files changed. Took me long enough and I dont wanted to let it go to waste because I lost motivation to do the whole thing. Additionally I am somewhat uncertain over the style and contents of the commets. So let me know what you thing please.
# Objective
> ℹ️ **Note**: This is a rebased version of #2383. A large portion of it has not been touched (only a few minor changes) so that any additional discussion may happen here. All credit should go to @NathanSWard for their work on the original PR.
- Currently reflection is not supported for arrays.
- Fixes#1213
## Solution
* Implement reflection for arrays via the `Array` trait.
* Note, `Array` is different from `List` in the way that you cannot push elements onto an array as they are statically sized.
* Now `List` is defined as a sub-trait of `Array`.
---
## Changelog
* Added the `Array` reflection trait
* Allows arrays up to length 32 to be reflected via the `Array` trait
## Migration Guide
* The `List` trait now has the `Array` supertrait. This means that `clone_dynamic` will need to specify which version to use:
```rust
// Before
let cloned = my_list.clone_dynamic();
// After
let cloned = List::clone_dynamic(&my_list);
```
* All implementers of `List` will now need to implement `Array` (this mostly involves moving the existing methods to the `Array` impl)
Co-authored-by: NathanW <nathansward@comcast.net>
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
What is says on the tin.
This has got more to do with making `clippy` slightly more *quiet* than it does with changing anything that might greatly impact readability or performance.
that said, deriving `Default` for a couple of structs is a nice easy win
#3457 adds the `doc_markdown` clippy lint, which checks doc comments to make sure code identifiers are escaped with backticks. This causes a lot of lint errors, so this is one of a number of PR's that will fix those lint errors one crate at a time.
This PR fixes lints in the `examples` folder.
# Objective
- Remove all the `.system()` possible.
- Check for remaining missing cases.
## Solution
- Remove all `.system()`, fix compile errors
- 32 calls to `.system()` remains, mostly internals, the few others should be removed after #2446
This is extracted out of eb8f973646476b4a4926ba644a77e2b3a5772159 and includes some additional changes to remove all references to AppBuilder and fix examples that still used App::build() instead of App::new(). In addition I didn't extract the sub app feature as it isn't ready yet.
You can use `git diff --diff-filter=M eb8f973646476b4a4926ba644a77e2b3a5772159` to find all differences in this PR. The `--diff-filtered=M` filters all files added in the original commit but not in this commit away.
Co-Authored-By: Carter Anderson <mcanders1@gmail.com>
Fixes#1895
Changed most `println` to `info` in examples, some to `warn` when it was useful to differentiate from other more noisy logs.
Added doc on `LogPlugin`, how to configure it, and why (and how) you may need to disable it
This only affected 2 Examples:
* `generic_reflection`: For some reason, a `pub use` statement was used. This was removed, and alphabetically ordered.
* `wireframe`: This example used the `bevy_internal` crate directly. Changed to use `bevy` instead.
All other Example Imports are correct.
One potential subjective change is the `removel_detection` example.
Unlike all other Examples, it has its (first) explanatory comment before the Imports.
* Rename reflect 'hash' method to 'reflect_hash' to avoid colliding with std:#️⃣:Hash::hash to resolve#943.
* Rename partial_eq to reflect_partial_eq to avoid collisions with implementations of PartialEq on primitives.
