As reported in #14004, many third-party plugins, such as Hanabi, enqueue
entities that don't have meshes into render phases. However, the
introduction of indirect mode added a dependency on mesh-specific data,
breaking this workflow. This is because GPU preprocessing requires that
the render phases manage indirect draw parameters, which don't apply to
objects that aren't meshes. The existing code skips over binned entities
that don't have indirect draw parameters, which causes the rendering to
be skipped for such objects.
To support this workflow, this commit adds a new field,
`non_mesh_items`, to `BinnedRenderPhase`. This field contains a simple
list of (bin key, entity) pairs. After drawing batchable and unbatchable
objects, the non-mesh items are drawn one after another. Bevy itself
doesn't enqueue any items into this list; it exists solely for the
application and/or plugins to use.
Additionally, this commit switches the asset ID in the standard bin keys
to be an untyped asset ID rather than that of a mesh. This allows more
flexibility, allowing bins to be keyed off any type of asset.
This patch adds a new example, `custom_phase_item`, which simultaneously
serves to demonstrate how to use this new feature and to act as a
regression test so this doesn't break again.
Fixes#14004.
## Changelog
### Added
* `BinnedRenderPhase` now contains a `non_mesh_items` field for plugins
to add custom items to.
# Objective
`StaticSystemParam` should delegate all `SystemParam` methods to the
inner param, but it looks like it was missed when the new `queue()`
method was added in #10839.
## Solution
Implement `StaticSystemParam::queue()` to delegate to the inner param.
The comment was incorrect - we are already looking at the pyramid
texture so we do not need to transform the size in any way. Doing that
resulted in a mip that was too fine to be selected in certain cases,
which resulted in a 2x2 pixel footprint not actually fully covering the
cluster sphere - sometimes this could lead to a non-conservative depth
value being computed which resulted in the cluster being marked as
invisible incorrectly.
This change updates meshopt-rs to 0.3 to take advantage of the newly
added sparse simplification mode: by default, simplifier assumes that
the entire mesh is simplified and runs a set of calculations that are
O(vertex count), but in our case we simplify many small mesh subsets
which is inefficient.
Sparse mode instead assumes that the simplified subset is only using a
portion of the vertex buffer, and optimizes accordingly. This changes
the meaning of the error (as it becomes relative to the subset, in our
case a meshlet group); to ensure consistent error selection, we also use
the ErrorAbsolute mode which allows us to operate in mesh coordinate
space.
Additionally, meshopt 0.3 runs optimizeMeshlet automatically as part of
`build_meshlets` so we no longer need to call it ourselves.
This reduces the time to build meshlet representation for Stanford Bunny
mesh from ~1.65s to ~0.45s (3.7x) in optimized builds.
# Objective
Implement `BuildChildrenTransformExt` for `EntityWorldMut`, which is
useful when working directly with a mutable `World` ref.
## Solution
I realize this isn't the most optimal implementation in that it doesn't
reuse the existing entity location for the child, but it is terse and
reuses the existing code. I can address that if needed.
## Testing
I only tested locally. There are no tests for `set_parent_in_place` and
`remove_parent_in_place` currently, but I can add some.
---
## Changelog
`BuildChildrenTransformExt` implemented for `EntityWorldMut`.
# Objective
When using combinators such as `EntityCommand::with_entity` to build
commands, it can be easy to forget to apply that command, leading to
dead code. In many cases this doesn't even lead to an unused variable
warning, which can make these mistakes difficult to track down
## Solution
Annotate the method with `#[must_use]`
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- #14017 changed how `UiImage` and `BackgroundColor` work
- one change was missed in example `color_grading`, another in the
mobile example
## Solution
- Change it in the examples
# Objective
- After #13908, shaders imported are collected
- this is done with a hashset, so order is random between executions
## Solution
- Don't use a hashset, and keep the order they were found in the example
# Objective
- Second part of #13900
- based on #13905
## Solution
- check_dir_light_mesh_visibility defers setting the entity's
`ViewVisibility `so that Bevy can schedule it to run in parallel with
`check_point_light_mesh_visibility`.
- Reduce HashMap lookups for directional light checking as much as
possible
- Use `par_iter `to parallelize the checking process within each system.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
The trait method `with_entity` is used to add an `EntityCommand` to the
command queue. Currently this method returns `WithEntity<C>` which pairs
a command with an `Entity`. By replacing this explicit type with an
opaque type, implementors can override this default implementation by
returning a custom command or closure that does the same thing with a
lower memory footprint.
# Solution
Return an opaque type from the method. As a bonus this file is now
cleaner without the `WithEntity` boilerplate
# Objective
- #4972 introduce a benchmark to measure chang detection performance
- However,it uses `iter_batch ` cause a lot of overhead in clone data to
each routine closure(it feels like a bug in`iter_batch `) and constructs
new query in every iter.This overhead masks the real change detection
throughput we want to measure. Instead of evaluating raw change
detection, the benchmark ends up dominated by data cloning and
allocation costs.
## Solution
- Use iter_batch_ref to reduce the benchmark overload
- Use cached query to better reflect real-world usage scenarios.
- Add more benmark
---
## Changelog
# Objective
Numerous people have been confused that Bevy runs slowly, when the
reason is that the `llvmpipe` software rendered is being used.
## Solution
Printing a warning could reduce the confusion.
# Objective
- Fixes#13728
## Solution
- add a new feature `smaa_luts`. if enables, it also enables `ktx2` and
`zstd`. if not, it doesn't load the files but use placeholders instead
- adds all the resources needed in the same places that system that uses
them are added.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/13993
PR inspired by https://github.com/bevyengine/bevy/pull/14007 to
accomplish the same thing, but maybe in a clearer fashion.
@Gingeh feel free to take my changes and add them to your PR, I don't
want to steal any credit
---------
Co-authored-by: Gingeh <39150378+Gingeh@users.noreply.github.com>
Co-authored-by: Bob Gardner <rgardner@inworld.ai>
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
In Bevy 0.13, `BackgroundColor` simply tinted the image of any
`UiImage`. This was confusing: in every other case (e.g. Text), this
added a solid square behind the element. #11165 changed this, but
removed `BackgroundColor` from `ImageBundle` to avoid confusion, since
the semantic meaning had changed.
However, this resulted in a serious UX downgrade / inconsistency, as
this behavior was no longer part of the bundle (unlike for `TextBundle`
or `NodeBundle`), leaving users with a relatively frustrating upgrade
path.
Additionally, adding both `BackgroundColor` and `UiImage` resulted in a
bizarre effect, where the background color was seemingly ignored as it
was covered by a solid white placeholder image.
Fixes#13969.
## Solution
Per @viridia's design:
> - if you don't specify a background color, it's transparent.
> - if you don't specify an image color, it's white (because it's a
multiplier).
> - if you don't specify an image, no image is drawn.
> - if you specify both a background color and an image color, they are
independent.
> - the background color is drawn behind the image (in whatever pixels
are transparent)
As laid out by @benfrankel, this involves:
1. Changing the default `UiImage` to use a transparent texture but a
pure white tint.
2. Adding `UiImage::solid_color` to quickly set placeholder images.
3. Changing the default `BorderColor` and `BackgroundColor` to
transparent.
4. Removing the default overrides for these values in the other assorted
UI bundles.
5. Adding `BackgroundColor` back to `ImageBundle` and `ButtonBundle`.
6. Adding a 1x1 `Image::transparent`, which can be accessed from
`Assets<Image>` via the `TRANSPARENT_IMAGE_HANDLE` constant.
Huge thanks to everyone who helped out with the design in the linked
issue and [the Discord
thread](https://discord.com/channels/691052431525675048/1255209923890118697/1255209999278280844):
this was very much a joint design.
@cart helped me figure out how to set the UiImage's default texture to a
transparent 1x1 image, which is a much nicer fix.
## Testing
I've checked the examples modified by this PR, and the `ui` example as
well just to be sure.
## Migration Guide
- `BackgroundColor` no longer tints the color of images in `ImageBundle`
or `ButtonBundle`. Set `UiImage::color` to tint images instead.
- The default texture for `UiImage` is now a transparent white square.
Use `UiImage::solid_color` to quickly draw debug images.
- The default value for `BackgroundColor` and `BorderColor` is now
transparent. Set the color to white manually to return to previous
behavior.
# Objective
- Fixes#13811 (probably, I lost my test code...)
## Solution
- Turns out that Queue and PrepareAssets are _not_ ordered. We should
probably either rethink our system sets (again), or improve the
documentation here. For reference, I've included the current ordering
below.
- The `prepare_meshlet_meshes_X` systems need to run after
`prepare_assets::<PreparedMaterial<M>>`, and have also been moved to
QueueMeshes.
```rust
schedule.configure_sets(
(
ExtractCommands,
ManageViews,
Queue,
PhaseSort,
Prepare,
Render,
Cleanup,
)
.chain(),
);
schedule.configure_sets((ExtractCommands, PrepareAssets, Prepare).chain());
schedule.configure_sets(QueueMeshes.in_set(Queue).after(prepare_assets::<GpuMesh>));
schedule.configure_sets(
(PrepareResources, PrepareResourcesFlush, PrepareBindGroups)
.chain()
.in_set(Prepare),
);
```
## Testing
- Ambiguity checker to make sure I don't have ambiguous system ordering
# Objective
#12469 changed the `Debug` impl for `Entity`, making sure it's actually
accurate for debugging. To ensure that its can still be readily logged
in error messages and inspectors, this PR added a more concise and
human-friendly `Display` impl.
However, users found this form too verbose: the `to_bits` information
was unhelpful and too long. Fixes#13980.
## Solution
- Don't include `Entity::to_bits` in the `Display` implementation for
`Entity`. This information can readily be accessed and logged for users
who need it.
- Also clean up the implementation of `Display` for `DebugName`,
introduced in https://github.com/bevyengine/bevy/pull/13760, to simply
use the new `Display` impl (since this was the desired format there).
## Testing
I've updated an existing test to verify the output of `Entity::display`.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
- Fix issue #13821
## Solution
- Rewrote the test to ensure that it actually tests the functionality
correctly. Then made the par_read function correctly change the values
of self.reader.last_event_count.
## Testing
- Rewrote the test for par_read to run the system schedule twice,
checking the output each time
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14003
## Solution
- Expose an API to perform updates for a specific sub-app, so we can
avoid mutable borrow the app twice.
## Testing
- I have tested the API by modifying the code in the `many_lights`
example with the following changes:
```rust
impl Plugin for LogVisibleLights {
fn build(&self, app: &mut App) {
let Some(render_app) = app.get_sub_app_mut(RenderApp) else {
return;
};
render_app.add_systems(Render, print_visible_light_count.in_set(RenderSet::Prepare));
}
fn finish(&self, app: &mut App) {
app.update_sub_app_by_label(RenderApp);
}
}
```
---
## Changelog
- add the `update_sub_app_by_label` API to `App` and `SubApps`.
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
- When writing "in game" debugging tools, quite often you need the name
of an entity (for example an entity tree). DebugName is the usual way of
doing that.
- A recent change to Entity's Debug implementation meant it was no
longer a minimal {index}v{generation} but instead a more verbose auto
generated Debug.
- This made DebugName's Debug implementation also verbose
## Solution
- I changed DebugName to derive Debug automatically and added a new
(preferred) Display implementation for it which is the preferred name
for an entity. If the entity has a Name component its the contents of
that, otherwise it is {index}v{generation} (though this does not use
Display of the Entity as that is more verbose than this).
## Testing
- I've added a new test in name.rs which tests the Display
implementation for DebugName by using to_string.
---
## Migration Guide
- In code which uses DebugName you should now use the Display
implementation rather than the Debug implementation (ie {} instead of
{:?} if you were printing it out).
---------
Co-authored-by: John Payne <20407779+johngpayne@users.noreply.github.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
Co-authored-by: Andres O. Vela <andresovela@users.noreply.github.com>
# Objective
Document how to use Tracy memory profiling.
Fixes https://github.com/bevyengine/bevy/issues/8417.
## Solution
Expand Tracy documentation in profiling.md.
## Testing
New documentation tested manually; no code changes made.
# Objective
Add example of an enum Component to ecs_guide.
Fixes https://github.com/bevyengine/bevy/issues/11344.
## Solution
Extended ecs_guide "game" to include an enum tracking whether a player
is on a "hot" or "cold" streak.
## Testing
Ran example manually.
cc @MrGVSV
fixes#13944
I literally just added `Did you forget to call SystemState::apply?` to
the error message. I tested it with the code snipped from the Issue and
yeah it works
# Objective
Fixes#13982
## Solution
~~Adds a new field to `bevy_log::LogPlugin`: `ansi: bool`~~
Documents the use of `std::env::set_var("NO_COLOR", "1");` to disable
colour output in terminals.
## Testing
Yes, all tests passed when I ran `cargo run -p ci -- test` and `cargo
run -p ci -- lints`
I have only tested the code on my Mac, though I doubt this change would
have any affect on other platforms.
---
# Objective
Closes#5943. Seems like Assets v2 solved this one.
## Solution
Added a test to confirm that using `Reflect::clone_value` and then
`FromReflect::from_reflect` on a `Handle<T>` both increment the strong
count.
## Testing
A new test was added to confirm behavior.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Tight, in-frame generation, re-parenting, despawning, etc., UI
operations could sometime lead taffy to panic (invalid SlotMap key used)
when an entity with an invalid state later despawned.
Fixes#12403
## Solution
Move the `remove_entities` call after children updates.
## Testing
`sickle_ui` had a case that always caused the panic. Tested before this
change, after this change, and before the change again to make sure the
error is there without the fix. The fix worked. Test steps and used
commit described in issue #12403.
I have also ran every bevy UI example, though none of them deal with
entity re-parenting or removal. No regression detected on them.
Tested on Windows only.
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.22.7 to
1.22.9.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.22.9</h2>
<h2>[1.22.9] - 2024-06-22</h2>
<h3>Fixes</h3>
<ul>
<li>Stop correcting <code>reoccurrence</code></li>
</ul>
<h2>v1.22.8</h2>
<h2>[1.22.8] - 2024-06-21</h2>
<h3>Features</h3>
<ul>
<li><em>(action)</em> Add Arm, Mac support</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.22.9] - 2024-06-22</h2>
<h3>Fixes</h3>
<ul>
<li>Stop correcting <code>reoccurrence</code></li>
</ul>
<h2>[1.22.8] - 2024-06-21</h2>
<h3>Features</h3>
<ul>
<li><em>(action)</em> Add Arm, Mac support</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="c16dc8f5b4"><code>c16dc8f</code></a>
chore: Release</li>
<li><a
href="c7ac1f9476"><code>c7ac1f9</code></a>
chore: Release</li>
<li><a
href="b34586cef4"><code>b34586c</code></a>
docs: Update changelog</li>
<li><a
href="ceaed5b649"><code>ceaed5b</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1044">#1044</a>
from epage/reoccurrence</li>
<li><a
href="038802dc09"><code>038802d</code></a>
fix(dict): Don't correct reoccurrence</li>
<li><a
href="dde47868a5"><code>dde4786</code></a>
chore: Release</li>
<li><a
href="85d76b5b17"><code>85d76b5</code></a>
docs: Update changelog</li>
<li><a
href="ab67cbb949"><code>ab67cbb</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1040">#1040</a>
from dyc3/action-support-mac-arm</li>
<li><a
href="89fad3115d"><code>89fad31</code></a>
feat[ci]: add support for mac and arm systems to the github action</li>
<li><a
href="ff7654294c"><code>ff76542</code></a>
chore(deps): Update Rust Stable to v1.79 (<a
href="https://redirect.github.com/crate-ci/typos/issues/1035">#1035</a>)</li>
<li>See full diff in <a
href="https://github.com/crate-ci/typos/compare/v1.22.7...v1.22.9">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Fixes https://github.com/bevyengine/bevy/issues/13813
* Fixes https://github.com/bevyengine/bevy/issues/13810
Tested a combined scene with both regular meshes and meshlet meshes
with:
* Regular forward setup
* Forward + normal/motion vector prepasses
* Deferred (with depth prepass since that's required)
* Deferred + depth/normal/motion vector prepasses
Still broken:
* Using meshlet meshes rendering in deferred and regular meshes
rendering in forward + depth/normal prepass. I don't know how to fix
this at the moment, so for now I've just add instructions to not mix
them.
# Objective
`with_event` will result in unsafe casting of event data of the given
type to the type expected by the Observer system. This is inherently
unsafe.
## Solution
Flag `Observer::with_event` and `ObserverDescriptor::with_events` as
unsafe. This will not affect normal workflows as `with_event` is
intended for very specific (largely internal) use cases.
This _should_ be backported to 0.14 before release.
---
## Changelog
- `Observer::with_event` is now unsafe.
- Rename `ObserverDescriptor::with_triggers` to
`ObserverDescriptor::with_events` and make it unsafe.
# Objective
- Fixes#13702
- When creating a new window, its scale was changed to match the one
returned by winit, but its size was not which resulted in an incorrect
size until the event with the correct size was received, at least 1
frame later
## Solution
- Apply the window scale to its size when creating it
I updated my 'main' branch, which accidentally closed the original PR
#13747. I'm reopening the this from an actual branch on my repo like I
should have done in the first place. Here's the original info from the
first PR:
* * *
# Problem
The `file_watcher` feature panics if the file_watcher's path "assets" is
not present. I stumbled upon this behavior when I was actually testing
against `embedded_watcher`. I had no "assets" directory and didn't need
one for [my project](https://github.com/shanecelis/bevy_plane_cut).
```text
$ cargo run --example simple; # Runs fine.
$ cargo run --example simple --feature embedded_watcher; # Panics
thread 'main' panicked at /Users/shane/.cargo/registry/src/index.crates.io-6f17d22bba15001f/bevy_asset-0.14.0-rc.2/src/io/source.rs:503:21:
Failed to create file watcher from path "assets", Error { kind: PathNotFound, paths: ["/Users/shane/Projects/bevy_plane_cut/assets"] }
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
# Opinion
If a project runs without panicing, then adding the `file_watcher`
feature shouldn't cause it to panic.
# Suggested Solution
This PR suggests if the "assets" path does not exist, emit a warning
stating that the file watcher could not be created and why. All other
errors will be treated as before with a panic and a message.
```text
$ cargo run --example simple --feature embedded_watcher; # Panics
2024-06-08T08:55:11.385249Z WARN bevy_asset::io::source: Skip creating file watcher because path "assets" does not exist.
2024-06-08T08:55:11.385291Z WARN bevy_asset::io::source: AssetSourceId::Default does not have an AssetWatcher configured. Consider enabling the `file_watcher` feature.
```
The second warning is new and I'd prefer it didn't emit under this
condition, but I'll wait to see whether this is actually regarded as a
bug.
# Testing
No tests added. Compiled against my project and it demonstrated the
suggested behavior.
* * *
I changed the second warning to the following when the `file_watcher`
feature is present. When it's not present, it uses the same warning as
before.
```
024-06-09T01:22:16.880619Z WARN bevy_asset::io::source: Skip creating file watcher because path "assets" does not exist.
2024-06-09T01:22:16.880660Z WARN bevy_asset::io::source: AssetSourceId::Default does not have an AssetWatcher configured. Consider adding an "assets" directory.
```
# Objective
In a few examples, we're specifying a font or font size that is the same
as the current default value. Might as well use the default. That'll be
one less thing to worry about if we ever need to change the default font
size. (wink)
In a few others, we were using a value of `25.0` and it didn't seem like
it was different for an important reason, so I switched to the default
there too.
(There are a bunch of examples that use non-default font sizes for
various reasons. Not trying address them all here.)
# Objective
A couple issues with this example are evident from this screenshot of
the example showcase:
<img width="319" alt="image"
src="https://github.com/bevyengine/bevy/assets/200550/5325bb29-9576-4989-a5a3-a972c8bbf1af">
- The images are misaligned, closer to the right edge of the screen
- The example uses a custom window resolution with a different aspect
ratio from the default, which results in black bars
## Solution
- Use the default window size
- Adjust positions so that things are centered
This isn't really fixing a problem, but I also:
- Used the default font size and adjusted the text labels and gaps so
that everything still fits
Which is how I got here in the first place (one less font size to adjust
for the cosmic text PR).
## Before
<img width="1350" alt="Screenshot 2024-06-20 at 12 23 10 PM"
src="https://github.com/bevyengine/bevy/assets/200550/1c7cfcfe-7edc-4561-a4e7-9b3bc8f87f75">
## After
<img width="1280" alt="Screenshot 2024-06-20 at 12 23 30 PM"
src="https://github.com/bevyengine/bevy/assets/200550/abab8a46-4e11-4ee6-a407-ae3b8bf31975">
This is an attempt to address issue #13725, which was about the
geometric primitives in the bevy_math crate lacking some detail in the
docs.
# Objective
Fixes#13725
## Solution
Added details to the docstrings. Mostly this consisted of specifying
that the primitives are centered on the origin, or describing how
they're defined (e.g., a circle is the set of all points some distance
from the origin).
## Testing
No testing, since the only changes were to docs.
Fixes#13701
After `winit` upgrade to `0.31`, windows were no longer correctly
resizing. This appears to just have been a simple mistake, where the new
physical size was being sourced from the `winit` window rather than on
the incoming `Window` component.
## Testing
Tested on macOS, but I'm curious whether this was also broken on other
platforms.
# Objective
Fixes#13866
## Solution
Add `insert_before` in **FixedMainScheduleOrder** and
**MainScheduleOrder**, add `insert_startup_before` in
**MainScheduleOrder**, applying the same logic as `insert_after`, except
for parameters naming and insertion index.
This is a followup to https://github.com/bevyengine/bevy/pull/13904
based on the discussion there, and switches two HashMaps that used
meshlet ids as keys to Vec.
In addition to a small further performance boost for `from_mesh` (1.66s
=> 1.60s), this makes processing deterministic modulo threading issues
wrt CRT rand described in the linked PR. This is valuable for debugging,
as you can visually or programmatically inspect the meshlet distribution
before/after making changes that should not change the output, whereas
previously every asset rebuild would change the meshlet structure.
Tested with https://github.com/bevyengine/bevy/pull/13431; after this
change, the visual output of meshlets is consistent between asset
rebuilds, and the MD5 of the output GLB file does not change either,
which was not the case before.
# Objective
- Make primitive meshing behavior consisten across platforms
- Avoid using sizes bigger than `u32` since these aren't even supported
for meshes
## Solution
- Use `u32` instead of `usize` for resolution/subdivisions/segments/etc
fields
---
## Changelog
- Change resolutions in primitive mesh builders from `usize` to `u32`
## Migration Guide
- All primitive mesh builders now take `u32` instead of `usize` for
their resolution/subdivision/segment counts
# Objective
The documentation for
[`Transform::align`](https://docs.rs/bevy/0.14.0-rc.3/bevy/transform/components/struct.Transform.html#method.align)
mentions a hypothetical ship model. Showing this concretely would be a
nice improvement over using a cube.
> For example, if a spaceship model has its nose pointing in the
X-direction in its own local coordinates and its dorsal fin pointing in
the Y-direction, then align(Dir3::X, v, Dir3::Y, w) will make the
spaceship’s nose point in the direction of v, while the dorsal fin does
its best to point in the direction w.
## Solution
This commit makes the ship less hypothetical by using a kenney ship
model in the example.
The local axes for the ship needed to change to accommodate the gltf, so
the hypothetical in the documentation and this example's local axes
don't necessarily match. Docs use `align(Dir3::X, v, Dir3::Y, w)` and
this example now uses `(Vec3::NEG_Z, *first, Vec3::X, *second)`.
I manually modified the `craft_speederD` Node's `translation` to be
0,0,0 in the gltf file, which means it now differs from kenney's
original model.
Original ship from: https://kenney.nl/assets/space-kit
## Testing
```
cargo run --example align
```
# Objective
Fixes#13920
## Solution
As described in the issue.
## Testing
Moved a custom transition plugin in example before any of the app-state
methods.
# Objective
Fixes#13933.
## Solution
Changed the return type.
## Testing
Fixed and reused the pre-existing tests for `inspect_entity`.
---
## Migration Guide
- `World::inspect_entity` now returns an `Iterator` instead of a `Vec`.
If you need a `Vec`, immediately collect the iterator:
`world.inspect_entity(entity).collect<Vec<_>>()`
