# Objective
The trait `ReadOnlySystemParam` is implemented for `NonSendMut`, when it should not be. This mistake was made in #6919.
## Solution
Remove the incorrect impl.
# Objective
Complete the first part of the migration detailed in bevyengine/rfcs#45.
## Solution
Add all the new stuff.
### TODO
- [x] Impl tuple methods.
- [x] Impl chaining.
- [x] Port ambiguity detection.
- [x] Write docs.
- [x] ~~Write more tests.~~(will do later)
- [ ] Write changelog and examples here?
- [x] ~~Replace `petgraph`.~~ (will do later)
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: Michael Hsu <mike.hsu@gmail.com>
Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
# Objective
- We rely on the construction of `EntityRef` to be valid elsewhere in unsafe code. This construction is not checked (for performance reasons), and thus this private method must be unsafe.
- Fixes#7218.
## Solution
- Make the method unsafe.
- Add safety docs.
- Improve safety docs slightly for the sibling `EntityMut::new`.
- Add debug asserts to start to verify these assumptions in debug mode.
## Context for reviewers
I attempted to verify the `EntityLocation` more thoroughly, but this turned out to be more work than expected. I've spun that off into #7221 as a result.
# Objective
Fixes#5859
## Solution
- Add `ClearChildren` and `ReplaceChildren` commands in the `crates/bevy_hierarchy/src/child_builder.rs`
---
## Changelog
- Added `ClearChildren` and `ReplaceChildren` struct
- Added `clear_children(&mut self) -> &mut Self` and `replace_children(&mut self, children: &[Entity]) -> &mut Self` function in `BuildChildren` trait
- Changed `PushChildren` `write` function body to a `push_children ` function to reused in `ReplaceChildren`
- Added `clear_children` function
- Added `push_and_replace_children_commands` and `push_and_clear_children_commands` test
Co-authored-by: ld000 <lidong9144@163.com>
Co-authored-by: lidong63 <lidong63@meituan.com>
# Objective
- Fixes a bug where `just_pressed` and `just_released` in `Input<GamepadButton>` might behave incorrectly due calling `clear` 3 times in a single frame through these three different systems: `gamepad_button_event_system`, `gamepad_axis_event_system` and `gamepad_connection_system` in any order
## Solution
- Call `clear` only once and before all the above three systems, i.e. in `gamepad_event_system`
## Additional Info
- Discussion in Discord: https://discord.com/channels/691052431525675048/768253008416342076/1064621963693273279
# Objective
The usages of the unsafe function `byte_add` are not properly documented.
Follow-up to #7151.
## Solution
Add safety comments to each call-site.
# Objective
Currently, the `AxisSettings::new` function is unusable due to
an implementation quirk. It only allows `AxisSettings` where
the bounds that are supposed to be positive are negative!
## Solution
- We fix the bound check
- We add a test to make sure the method is usable
Seems like the error slipped through because of the relatively
verbose code style. With all those `if/else`, very long names,
range syntax, the bound check is actually hard to spot. I first
refactored a lot of code, but I left out the refactor because the
fix should be integrated independently.
---
## Changelog
- Fix `AxisSettings::new` only accepting invalid bounds
# Objective
Add useful information about cursor position relative to a UI node. Fixes#7079.
## Solution
- Added a new `RelativeCursorPosition` component
---
## Changelog
- Added
- `RelativeCursorPosition`
- an example showcasing the new component
Co-authored-by: Dawid Piotrowski <41804418+Pietrek14@users.noreply.github.com>
# Objective
- Allow rendering queue systems to use a `Res<PipelineCache>` even for queueing up new rendering pipelines. This is part of unblocking parallel execution queue systems.
## Solution
- Make `PipelineCache` internally mutable w.r.t to queueing new pipelines. Pipelines are no longer immediately updated into the cache state, but rather queued into a Vec. The Vec of pending new pipelines is then later processed at the same time we actually create the queued pipelines on the GPU device.
---
## Changelog
`PipelineCache` no longer requires mutable access in order to queue render / compute pipelines.
## Migration Guide
* Most usages of `resource_mut::<PipelineCache>` and `ResMut<PipelineCache>` can be changed to `resource::<PipelineCache>` and `Res<PipelineCache>` as long as they don't use any methods requiring mutability - the only public method requiring it is `process_queue`.
# Objective
- The function `BlobVec::replace_unchecked` has informal use of safety comments.
- This function does strange things with `OwningPtr` in order to get around the borrow checker.
## Solution
- Put safety comments in front of each unsafe operation. Describe the specific invariants of each operation and how they apply here.
- Added a guard type `OnDrop`, which is used to simplify ownership transfer in case of a panic.
---
## Changelog
+ Added the guard type `bevy_utils::OnDrop`.
+ Added conversions from `Ptr`, `PtrMut`, and `OwningPtr` to `NonNull<u8>`.
# Objective
Fix#5248.
## Solution
Support `In<T>` parameters and allow returning arbitrary types in exclusive systems.
---
## Changelog
- Exclusive systems may now be used with system piping.
## Migration Guide
Exclusive systems (systems that access `&mut World`) now support system piping, so the `ExclusiveSystemParamFunction` trait now has generics for the `In`put and `Out`put types.
```rust
// Before
fn my_generic_system<T, Param>(system_function: T)
where T: ExclusiveSystemParamFunction<Param>
{ ... }
// After
fn my_generic_system<T, In, Out, Param>(system_function: T)
where T: ExclusiveSystemParamFunction<In, Out, Param>
{ ... }
```
Bevy People should be considered the source of truth for Bevy Organization roles. This replaces inline lists of maintainers and SMEs with links to Bevy People.
We are in the process of rolling out a new Bevy Organization role! (Subject Matter Expert)
This adds a new "The Bevy Organization" document and links to it from CONTRIBUTING.md. This doc describes how the Bevy Organization will work going forward. It outlines the functionality of each role, as well as the expectations we have for them. The previously existing roles (Project Lead, Maintainer) still work the same way, but their definition and scope have been made much clearer.
Tomorrow we will be announcing this publicly in a blog post. This will describe the motivation and announce the first round of SMEs . But before that it makes sense to do a quick review round first.
Given the quick turnaround on this PR, this isn't the best platform to discuss changes to the SME system (or its validity). After you have read the announcement tomorrow, feel free to start discussions wherever is preferable to you (this repo, discord, etc). So for now, please just review for clarity / typos / phrasing / missed info / etc.
[Rendered](08ceae43db/docs/the_bevy_organization.md)
# Objective
Pipelines can be customized by wrapping an existing pipeline in a newtype and adding custom logic to its implementation of `SpecializedMeshPipeline::specialize`. To make that easier, the wrapped pipeline type needs to implement `Clone`.
For example, the current non-cloneable pipelines require wrapper pipelines to pull apart the wrapped pipeline like this:
```rust
impl FromWorld for Wireframe2dPipeline {
fn from_world(world: &mut World) -> Self {
let p = &world.resource::<Material2dPipeline<ColorMaterial>>();
Self {
mesh2d_pipeline: p.mesh2d_pipeline.clone(),
material2d_layout: p.material2d_layout.clone(),
vertex_shader: p.vertex_shader.clone(),
fragment_shader: p.fragment_shader.clone(),
}
}
}
```
## Solution
Derive or implement `Clone` on all built-in pipeline types. This is easy to do since they mostly just contain cheaply clonable reference-counted types.
---
## Changelog
Implement `Clone` for all pipeline types.
# Objective
fix error with shadow shader's spotlight direction calculation when direction.y ~= 0
fixes#7152
## Solution
same as #6167: in shadows.wgsl, clamp 1-x^2-z^2 to >= 0 so that we can safely sqrt it
# Objective
There are some utility functions for actually working with `Storages` inside `entity_ref.rs` that are used both for `EntityRef/EntityMut` and `World`, with a `// TODO: move to Storages`.
This PR moves them to private methods on `World`, because that's the safest API boundary. On `Storages` you would need to ensure that you pass `Components` from the same world.
## Solution
- move get_component[_with_type], get_ticks[_with_type], get_component_and_ticks[_with_type] to `World` (still pub(crate))
- replace `pub use entity_ref::*;` with `pub use entity_ref::{EntityRef, EntityMut}` and qualified `entity_ref::get_mut[_by_id]` in `world.rs`
- add safety comments to a bunch of methods
# Objective
* `World::init_resource` and `World::get_resource_or_insert_with` are implemented naively, and as such they perform duplicate `TypeId -> ComponentId` lookups.
* `World::get_resource_or_insert_with` contains an additional duplicate `ComponentId -> ResourceData` lookup.
* This function also contains an unnecessary panic branch, which we rely on the optimizer to be able to remove.
## Solution
Implement the functions using engine-internal code, instead of combining high-level functions. This allows computed variables to persist across different branches, instead of being recomputed.
# Objective
It is often necessary to update an entity's parent
while keeping its GlobalTransform static. Currently
it is cumbersome and error-prone (two questions in
the discord `#help` channel in the past week)
- Part 2, resolves#5475
- Builds on: #7020.
## Solution
- Added the `BuildChildrenTransformExt` trait, it is part
of `bevy::prelude` and adds the following methods to `EntityCommands`:
- `set_parent_in_place`: Change the parent of an entity and
update its `Transform` in order to preserve its `GlobalTransform` after the parent change
- `remove_parent_in_place`: Remove an entity from a hierarchy,
while preserving its `GlobalTransform`.
---
## Changelog
- Added the `BuildChildrenTransformExt` trait, it is part
of `bevy::prelude` and adds the following methods to `EntityCommands`:
- `set_parent_in_place`: Change the parent of an entity and
update its `Transform` in order to preserve its `GlobalTransform` after the parent change
- `remove_parent_in_place`: Remove an entity from a hierarchy,
while preserving its `GlobalTransform`.
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- While building UI, it makes more sense for most nodes to have a `FocusPolicy` of `Pass`, so that user interaction can correctly bubble
- Only `ButtonBundle` blocks by default
This change means that for someone adding children to a button, it's not needed to change the focus policy of those children to `Pass` for the button to continue to work.
---
## Changelog
- `FocusPolicy` default has changed from `FocusPolicy::Block` to `FocusPolicy::Pass`
## Migration Guide
- `FocusPolicy` default has changed from `FocusPolicy::Block` to `FocusPolicy::Pass`
# Objective
The documentation of the bevy_render crate is still pretty incomplete.
This PR follows up on #6885 and improves the documentation of the `render_phase` module.
This module contains one of our most important rendering abstractions and the current documentation is pretty confusing. This PR tries to clarify what all of these pieces are for and how they work together to form bevy`s modular rendering logic.
## Solution
### Code Reformating
- I have moved the `rangefinder` into the `render_phase` module since it is only used there.
- I have moved the `PhaseItem` (and the `BatchedPhaseItem`) from `render_phase::draw` over to `render_phase::mod`. This does not change the public-facing API since they are reexported anyway, but this change makes the relation between `RenderPhase` and `PhaseItem` clear and easier to discover.
### Documentation
- revised all documentation in the `render_phase` module
- added a module-level explanation of how `RenderPhase`s, `RenderPass`es, `PhaseItem`s, `Draw` functions, and `RenderCommands` relate to each other and how they are used
---
## Changelog
- The `rangefinder` module has been moved into the `render_phase` module.
## Migration Guide
- The `rangefinder` module has been moved into the `render_phase` module.
```rust
//old
use bevy::render::rangefinder::*;
// new
use bevy::render::render_phase::rangefinder::*;
```
# Objective
Following #6681, both `TableRow` and `TableId` are now part of `EntityLocation`. However, the safety invariant on `EntityLocation` requires that all of the constituent fields are `repr(transprent)` or `repr(C)` and the bit pattern of all 1s must be valid. This is not true for `TableRow` and `TableId` currently.
## Solution
Mark `TableRow` and `TableId` to satisfy the safety requirement. Add safety comments on `ArchetypeId`, `ArchetypeRow`, `TableId` and `TableRow`.
# Objective
Improve safety testing when using `bevy_ptr` types. This is a follow-up to #7113.
## Solution
Add a debug-only assertion that pointers are aligned when casting to a concrete type. This should very quickly catch any unsoundness from unaligned pointers, even without miri. However, this can have a large negative perf impact on debug builds.
---
## Changelog
Added: `Ptr::deref` will now panic in debug builds if the pointer is not aligned.
Added: `PtrMut::deref_mut` will now panic in debug builds if the pointer is not aligned.
Added: `OwningPtr::read` will now panic in debug builds if the pointer is not aligned.
Added: `OwningPtr::drop_as` will now panic in debug builds if the pointer is not aligned.
# Objective
- It can be useful for third party crates to work independently on how bevy is imported
## Solution
- Expose an helper to get a subcrate path for macros
# Objective
- There is a warning when building in release:
```
warning: unused import: `bevy_ecs::system::Local`
--> crates/bevy_render/src/extract_resource.rs:5:5
|
5 | use bevy_ecs::system::Local;
| ^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
```
- It's used 59751d6e33/crates/bevy_render/src/extract_resource.rs (L47)
- Fix it
## Solution
- Gate the import
- repeat of #5320
# Objective
`MutUntyped` is a struct that stores a `PtrMut` alongside change tick metadata. Working with this type is cumbersome, and has few benefits over storing the pointer and change ticks separately.
Related: #6430 (title is out of date)
## Solution
Add a convenience method for transforming an untyped change detection pointer into its typed counterpart.
---
## Changelog
- Added the method `MutUntyped::with_type`.
As mentioned in https://github.com/bevyengine/bevy/pull/6530. It allows to not create a new constant and simply having it to show up in the documentation when someone is looking for "transparent" (case insensitive) in rustdoc search.
cc @alice-i-cecile
# Objective
Enums are now reflectable, but are not accessible via reflection paths.
This would allow us to do things like:
```rust
#[derive(Reflect)]
struct MyStruct {
data: MyEnum
}
#[derive(Reflect)]
struct MyEnum {
Foo(u32, u32),
Bar(bool)
}
let x = MyStruct {
data: MyEnum::Foo(123),
};
assert_eq!(*x.get_path::<u32>("data.1").unwrap(), 123);
```
## Solution
Added support for enums in reflection paths.
##### Note
This uses a simple approach of just getting the field with the given accessor. It does not do matching or anything else to ensure the enum is the intended variant. This means that the variant must be known ahead of time or matched outside the reflection path (i.e. path to variant, perform manual match, and continue pathing).
---
## Changelog
- Added support for enums in reflection paths
# Objective
There are times where we want to simply take an owned `dyn Reflect` and cast it to a type `T`.
Currently, this involves doing:
```rust
let value = value.take::<T>().unwrap_or_else(|value| {
T::from_reflect(&*value).unwrap_or_else(|| {
panic!(
"expected value of type {} to convert to type {}.",
value.type_name(),
std::any::type_name::<T>()
)
})
});
```
This is a common operation that could be easily be simplified.
## Solution
Add the `FromReflect::take_from_reflect` method. This first tries to `take` the value, calling `from_reflect` iff that fails.
```rust
let value = T::take_from_reflect(value).unwrap_or_else(|value| {
panic!(
"expected value of type {} to convert to type {}.",
value.type_name(),
std::any::type_name::<T>()
)
});
```
Based on suggestion from @soqb on [Discord](https://discord.com/channels/691052431525675048/1002362493634629796/1041046880316043374).
---
## Changelog
- Add `FromReflect::take_from_reflect` method
# Objective
- Fixes#7066
## Solution
- Split the ChangeDetection trait into ChangeDetection and ChangeDetectionMut
- Added Ref as equivalent to &T with change detection
---
## Changelog
- Support for Ref which allow inspecting change detection flags in an immutable way
## Migration Guide
- While bevy prelude includes both ChangeDetection and ChangeDetectionMut any code explicitly referencing ChangeDetection might need to be updated to ChangeDetectionMut or both. Specifically any reading logic requires ChangeDetection while writes requires ChangeDetectionMut.
use bevy_ecs::change_detection::DetectChanges -> use bevy_ecs::change_detection::{DetectChanges, DetectChangesMut}
- Previously Res had methods to access change detection `is_changed` and `is_added` those methods have been moved to the `DetectChanges` trait. If you are including bevy prelude you will have access to these types otherwise you will need to `use bevy_ecs::change_detection::DetectChanges` to continue using them.
# Objective
- https://github.com/bevyengine/bevy/pull/3505 marked `S-Adopt-Me` , this pr is to continue his work.
## Solution
- run `cargo clippy --workspace --all-targets --all-features -- -Aclippy::type_complexity -Wclippy::doc_markdown -Wclippy::redundant_else -Wclippy::match_same_arms -Wclippy::semicolon_if_nothing_returned -Wclippy::explicit_iter_loop -Wclippy::map_flatten -Dwarnings` under benches dir.
- fix issue according to suggestion.
# Objective
The types in the `bevy_ptr` accidentally did not document anything relating to alignment. This is unsound as many methods rely on the pointer being correctly aligned.
## Solution
This PR introduces new safety invariants on the `$ptr::new`, `$ptr::byte_offset` and `$ptr::byte_add` methods requiring them to keep the pointer aligned. This is consistent with the documentation of these pointer types which document them as being "type erased borrows".
As it was pointed out (by @JoJoJet in #7117) that working with unaligned pointers can be useful (for example our commands abstraction which does not try to align anything properly, see #7039) this PR also introduces a default type parameter to all the pointer types that specifies whether it has alignment requirements or not. I could not find any code in `bevy_ecs` that would need unaligned pointers right now so this is going unused.
---
## Changelog
- Correctly document alignment requirements on `bevy_ptr` types.
- Support variants of `bevy_ptr` types that do not require being correctly aligned for the pointee type.
## Migration Guide
- Safety invariants on `bevy_ptr` types' `new` `byte_add` and `byte_offset` methods have been changed. All callers should re-audit for soundness.
# Objective
- Spawn tasks from other threads onto an async executor, but limit those tasks to run on a specific thread.
- This is a continuation of trying to break up some of the changes in pipelined rendering.
- Eventually this will be used to allow `NonSend` systems to run on the main thread in pipelined rendering #6503 and also to solve #6552.
- For this specific PR this allows for us to store a thread executor in a thread local, rather than recreating a scope executor for every scope which should save on a little work.
## Solution
- We create a Executor that does a runtime check for what thread it's on before creating a !Send ticker. The ticker is the only way for the executor to make progress.
---
## Changelog
- create a ThreadExecutor that can only be ticked on one thread.
`Query`'s fields being `pub(crate)` means that the struct can be constructed via safe code from anywhere in `bevy_ecs` . This is Not Good since it is intended that all construction of this type goes through `Query::new` which is an `unsafe fn` letting various `Query` methods rely on those invariants holding even though they can be trivially bypassed.
This has no user facing impact
# Objective
It is possible to manually update `GlobalTransform`.
The engine actually assumes this is not possible.
For example, `propagate_transform` does not update children
of an `Entity` which **`GlobalTransform`** changed,
leading to unexpected behaviors.
A `GlobalTransform` set by the user may also be blindly
overwritten by the propagation system.
## Solution
- Remove `translation_mut`
- Explain to users that they shouldn't manually update the `GlobalTransform`
- Remove `global_vs_local.rs` example, since it misleads users
in believing that it is a valid use-case to manually update the
`GlobalTransform`
---
## Changelog
- Remove `GlobalTransform::translation_mut`
## Migration Guide
`GlobalTransform::translation_mut` has been removed without alternative,
if you were relying on this, update the `Transform` instead. If the given entity
had children or parent, you may need to remove its parent to make its transform
independent (in which case the new `Commands::set_parent_in_place` and
`Commands::remove_parent_in_place` may be of interest)
Bevy may add in the future a way to toggle transform propagation on
an entity basis.
# Objective
- Fix#7103.
- The issue is caused because I forgot to add a where clause to a generated struct in #7056.
## Solution
- Add the where clause.
`Query` relies on the `World` it stores being the same as the world used for creating the `QueryState` it stores. If they are not the same then everything is very unsound. This was not actually being checked anywhere, `Query::new` did not have a safety invariant or even an assertion that the `WorldId`'s are the same.
This shouldn't have any user facing impact unless we have really messed up in bevy and have unsoundness elsewhere (in which case we would now get a panic instead of being unsound).
# Objective
- In some cases, you need a `Mut<T>` pointer, but you only have a mutable reference to one. There is no easy way of converting `&'a mut Mut<'_, T>` -> `Mut<'a, T>` outside of the engine.
### Example (Before)
```rust
fn do_with_mut<T>(val: Mut<T>) { ... }
for x: Mut<T> in &mut query {
// The function expects a `Mut<T>`, so `x` gets moved here.
do_with_mut(x);
// Error: use of moved value.
do_a_thing(&x);
}
```
## Solution
- Add the function `reborrow`, which performs the mapping. This is analogous to `PtrMut::reborrow`.
### Example (After)
```rust
fn do_with_mut<T>(val: Mut<T>) { ... }
for x: Mut<T> in &mut query {
// We reborrow `x`, so the original does not get moved.
do_with_mut(x.reborrow());
// Works fine.
do_a_thing(&x);
}
```
---
## Changelog
- Added the method `reborrow` to `Mut`, `ResMut`, `NonSendMut`, and `MutUntyped`.
# Objective
This a follow-up to #6894, see https://github.com/bevyengine/bevy/pull/6894#discussion_r1045203113
The goal is to avoid cloning any string when getting a `&TypeRegistration` corresponding to a string which is being deserialized. As a bonus code duplication is also reduced.
## Solution
The manual deserialization of a string and lookup into the type registry has been moved into a separate `TypeRegistrationDeserializer` type, which implements `DeserializeSeed` with a `Visitor` that accepts any string with `visit_str`, even ones that may not live longer than that function call.
`BorrowedStr` has been removed since it's no longer used.
---
## Changelog
- The type `TypeRegistrationDeserializer` has been added, which simplifies getting a `&TypeRegistration` while deserializing a string.
