bevy/examples/3d/shadow_biases.rs

331 lines
11 KiB
Rust
Raw Normal View History

//! Demonstrates how shadow biases affect shadows in a 3d scene.
#[path = "../helpers/camera_controller.rs"]
mod camera_controller;
New Exposure and Lighting Defaults (and calibrate examples) (#11868) # Objective After adding configurable exposure, we set the default ev100 value to `7` (indoor). This brought us out of sync with Blender's configuration and defaults. This PR changes the default to `9.7` (bright indoor or very overcast outdoors), as I calibrated in #11577. This feels like a very reasonable default. The other changes generally center around tweaking Bevy's lighting defaults and examples to play nicely with this number, alongside a few other tweaks and improvements. Note that for artistic reasons I have reverted some examples, which changed to directional lights in #11581, back to point lights. Fixes #11577 --- ## Changelog - Changed `Exposure::ev100` from `7` to `9.7` to better match Blender - Renamed `ExposureSettings` to `Exposure` - `Camera3dBundle` now includes `Exposure` for discoverability - Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the middle-to-top of those ranges instead of near the bottom - Added new `AMBIENT_DAYLIGHT` constant and set that as the new `DirectionalLight` default illuminance. - `PointLight` and `SpotLight` now have a default `intensity` of 1,000,000 lumens. This makes them actually useful in the context of the new "semi-outdoor" exposure and puts them in the "cinema lighting" category instead of the "common household light" category. They are also reasonably close to the Blender default. - `AmbientLight` default has been bumped from `20` to `80`. ## Migration Guide - The increased `Exposure::ev100` means that all existing 3D lighting will need to be adjusted to match (DirectionalLights, PointLights, SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust the `Exposure::ev100` on your cameras to work nicely with your current lighting values. If you are currently relying on default intensity values, you might need to change the intensity to achieve the same effect. Note that in Bevy 0.12, point/spot lights had a different hard coded ev100 value than directional lights. In Bevy 0.13, they use the same ev100, so if you have both in your scene, the _scale_ between these light types has changed and you will likely need to adjust one or both of them.
2024-02-15 20:42:48 +00:00
use bevy::{pbr::ShadowFilteringMethod, prelude::*};
use camera_controller::{CameraController, CameraControllerPlugin};
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_plugins(CameraControllerPlugin)
.add_systems(Startup, setup)
.add_systems(
Update,
(
cycle_filter_methods,
adjust_light_position,
adjust_point_light_biases,
toggle_light,
adjust_directional_light_biases,
),
)
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
.run();
}
#[derive(Component)]
struct Lights;
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
/// set up a 3D scene to test shadow biases and perspective projections
fn setup(
mut commands: Commands,
mut meshes: ResMut<Assets<Mesh>>,
mut materials: ResMut<Assets<StandardMaterial>>,
) {
let spawn_plane_depth = 300.0f32;
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
let spawn_height = 2.0;
let sphere_radius = 0.25;
let white_handle = materials.add(StandardMaterial {
Migrate from `LegacyColor` to `bevy_color::Color` (#12163) # Objective - As part of the migration process we need to a) see the end effect of the migration on user ergonomics b) check for serious perf regressions c) actually migrate the code - To accomplish this, I'm going to attempt to migrate all of the remaining user-facing usages of `LegacyColor` in one PR, being careful to keep a clean commit history. - Fixes #12056. ## Solution I've chosen to use the polymorphic `Color` type as our standard user-facing API. - [x] Migrate `bevy_gizmos`. - [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs - [x] Migrate sprites - [x] Migrate UI - [x] Migrate `ColorMaterial` - [x] Migrate `MaterialMesh2D` - [x] Migrate fog - [x] Migrate lights - [x] Migrate StandardMaterial - [x] Migrate wireframes - [x] Migrate clear color - [x] Migrate text - [x] Migrate gltf loader - [x] Register color types for reflection - [x] Remove `LegacyColor` - [x] Make sure CI passes Incidental improvements to ease migration: - added `Color::srgba_u8`, `Color::srgba_from_array` and friends - added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the `Alpha` trait - add and immediately deprecate (lol) `Color::rgb` and friends in favor of more explicit and consistent `Color::srgb` - standardized on white and black for most example text colors - added vector field traits to `LinearRgba`: ~~`Add`, `Sub`, `AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications and divisions do not scale alpha. `Add` and `Sub` have been cut from this PR. - added `LinearRgba` and `Srgba` `RED/GREEN/BLUE` - added `LinearRgba_to_f32_array` and `LinearRgba::to_u32` ## Migration Guide Bevy's color types have changed! Wherever you used a `bevy::render::Color`, a `bevy::color::Color` is used instead. These are quite similar! Both are enums storing a color in a specific color space (or to be more precise, using a specific color model). However, each of the different color models now has its own type. TODO... - `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`, `Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`, `Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`. - `Color::set_a` and `Color::a` is now `Color::set_alpha` and `Color::alpha`. These are part of the `Alpha` trait in `bevy_color`. - `Color::is_fully_transparent` is now part of the `Alpha` trait in `bevy_color` - `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for `g`, `b` `h`, `s` and `l` have been removed due to causing silent relatively expensive conversions. Convert your `Color` into the desired color space, perform your operations there, and then convert it back into a polymorphic `Color` enum. - `Color::hex` is now `Srgba::hex`. Call `.into` or construct a `Color::Srgba` variant manually to convert it. - `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`, `ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now store a `LinearRgba`, rather than a polymorphic `Color` - `Color::rgb_linear` and `Color::rgba_linear` are now `Color::linear_rgb` and `Color::linear_rgba` - The various CSS color constants are no longer stored directly on `Color`. Instead, they're defined in the `Srgba` color space, and accessed via `bevy::color::palettes::css`. Call `.into()` on them to convert them into a `Color` for quick debugging use, and consider using the much prettier `tailwind` palette for prototyping. - The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with the standard naming. - Vector field arithmetic operations on `Color` (add, subtract, multiply and divide by a f32) have been removed. Instead, convert your colors into `LinearRgba` space, and perform your operations explicitly there. This is particularly relevant when working with emissive or HDR colors, whose color channel values are routinely outside of the ordinary 0 to 1 range. - `Color::as_linear_rgba_f32` has been removed. Call `LinearRgba::to_f32_array` instead, converting if needed. - `Color::as_linear_rgba_u32` has been removed. Call `LinearRgba::to_u32` instead, converting if needed. - Several other color conversion methods to transform LCH or HSL colors into float arrays or `Vec` types have been removed. Please reimplement these externally or open a PR to re-add them if you found them particularly useful. - Various methods on `Color` such as `rgb` or `hsl` to convert the color into a specific color space have been removed. Convert into `LinearRgba`, then to the color space of your choice. - Various implicitly-converting color value methods on `Color` such as `r`, `g`, `b` or `h` have been removed. Please convert it into the color space of your choice, then check these properties. - `Color` no longer implements `AsBindGroup`. Store a `LinearRgba` internally instead to avoid conversion costs. --------- Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com> Co-authored-by: Afonso Lage <lage.afonso@gmail.com> Co-authored-by: Rob Parrett <robparrett@gmail.com> Co-authored-by: Zachary Harrold <zac@harrold.com.au>
2024-02-29 19:35:12 +00:00
base_color: Color::WHITE,
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
perceptual_roughness: 1.0,
..default()
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
});
Deprecate shapes in `bevy_render::mesh::shape` (#11773) # Objective #11431 and #11688 implemented meshing support for Bevy's new geometric primitives. The next step is to deprecate the shapes in `bevy_render::mesh::shape` and to later remove them completely for 0.14. ## Solution Deprecate the shapes and reduce code duplication by utilizing the primitive meshing API for the old shapes where possible. Note that some shapes have behavior that can't be exactly reproduced with the new primitives yet: - `Box` is more of an AABB with min/max extents - `Plane` supports a subdivision count - `Quad` has a `flipped` property These types have not been changed to utilize the new primitives yet. --- ## Changelog - Deprecated all shapes in `bevy_render::mesh::shape` - Changed all examples to use new primitives for meshing ## Migration Guide Bevy has previously used rendering-specific types like `UVSphere` and `Quad` for primitive mesh shapes. These have now been deprecated to use the geometric primitives newly introduced in version 0.13. Some examples: ```rust let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0)); let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0)); let before = meshes.add(shape::Quad::default()); let after = meshes.add(Rectangle::default()); let before = meshes.add(shape::Plane::from_size(5.0)); // The surface normal can now also be specified when using `new` let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0)); let before = meshes.add( Mesh::try_from(shape::Icosphere { radius: 0.5, subdivisions: 5, }) .unwrap(), ); let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap()); ```
2024-02-08 18:01:34 +00:00
let sphere_handle = meshes.add(Sphere::new(sphere_radius));
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
let light_transform = Transform::from_xyz(5.0, 5.0, 0.0).looking_at(Vec3::ZERO, Vec3::Y);
commands
.spawn((
SpatialBundle {
transform: light_transform,
..default()
},
Lights,
))
.with_children(|builder| {
builder.spawn(PointLight {
intensity: 0.0,
range: spawn_plane_depth,
color: Color::WHITE,
shadow_depth_bias: 0.0,
shadow_normal_bias: 0.0,
shadows_enabled: true,
..default()
});
builder.spawn(DirectionalLight {
shadow_depth_bias: 0.0,
shadow_normal_bias: 0.0,
shadows_enabled: true,
..default()
});
});
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
// camera
Spawn now takes a Bundle (#6054) # Objective Now that we can consolidate Bundles and Components under a single insert (thanks to #2975 and #6039), almost 100% of world spawns now look like `world.spawn().insert((Some, Tuple, Here))`. Spawning an entity without any components is an extremely uncommon pattern, so it makes sense to give spawn the "first class" ergonomic api. This consolidated api should be made consistent across all spawn apis (such as World and Commands). ## Solution All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input: ```rust // before: commands .spawn() .insert((A, B, C)); world .spawn() .insert((A, B, C); // after commands.spawn((A, B, C)); world.spawn((A, B, C)); ``` All existing instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api. A new `spawn_empty` has been added, replacing the old `spawn` api. By allowing `world.spawn(some_bundle)` to replace `world.spawn().insert(some_bundle)`, this opened the door to removing the initial entity allocation in the "empty" archetype / table done in `spawn()` (and subsequent move to the actual archetype in `.insert(some_bundle)`). This improves spawn performance by over 10%: ![image](https://user-images.githubusercontent.com/2694663/191627587-4ab2f949-4ccd-4231-80eb-80dd4d9ad6b9.png) To take this measurement, I added a new `world_spawn` benchmark. Unfortunately, optimizing `Commands::spawn` is slightly less trivial, as Commands expose the Entity id of spawned entities prior to actually spawning. Doing the optimization would (naively) require assurances that the `spawn(some_bundle)` command is applied before all other commands involving the entity (which would not necessarily be true, if memory serves). Optimizing `Commands::spawn` this way does feel possible, but it will require careful thought (and maybe some additional checks), which deserves its own PR. For now, it has the same performance characteristics of the current `Commands::spawn_bundle` on main. **Note that 99% of this PR is simple renames and refactors. The only code that needs careful scrutiny is the new `World::spawn()` impl, which is relatively straightforward, but it has some new unsafe code (which re-uses battle tested BundlerSpawner code path).** --- ## Changelog - All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input - All instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api - World and Commands now have `spawn_empty()`, which is equivalent to the old `spawn()` behavior. ## Migration Guide ```rust // Old (0.8): commands .spawn() .insert_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): commands.spawn_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): let entity = commands.spawn().id(); // New (0.9) let entity = commands.spawn_empty().id(); // Old (0.8) let entity = world.spawn().id(); // New (0.9) let entity = world.spawn_empty(); ```
2022-09-23 19:55:54 +00:00
commands.spawn((
Camera3dBundle {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
transform: Transform::from_xyz(-1.0, 1.0, 1.0)
.looking_at(Vec3::new(-1.0, 1.0, 0.0), Vec3::Y),
..default()
Spawn now takes a Bundle (#6054) # Objective Now that we can consolidate Bundles and Components under a single insert (thanks to #2975 and #6039), almost 100% of world spawns now look like `world.spawn().insert((Some, Tuple, Here))`. Spawning an entity without any components is an extremely uncommon pattern, so it makes sense to give spawn the "first class" ergonomic api. This consolidated api should be made consistent across all spawn apis (such as World and Commands). ## Solution All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input: ```rust // before: commands .spawn() .insert((A, B, C)); world .spawn() .insert((A, B, C); // after commands.spawn((A, B, C)); world.spawn((A, B, C)); ``` All existing instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api. A new `spawn_empty` has been added, replacing the old `spawn` api. By allowing `world.spawn(some_bundle)` to replace `world.spawn().insert(some_bundle)`, this opened the door to removing the initial entity allocation in the "empty" archetype / table done in `spawn()` (and subsequent move to the actual archetype in `.insert(some_bundle)`). This improves spawn performance by over 10%: ![image](https://user-images.githubusercontent.com/2694663/191627587-4ab2f949-4ccd-4231-80eb-80dd4d9ad6b9.png) To take this measurement, I added a new `world_spawn` benchmark. Unfortunately, optimizing `Commands::spawn` is slightly less trivial, as Commands expose the Entity id of spawned entities prior to actually spawning. Doing the optimization would (naively) require assurances that the `spawn(some_bundle)` command is applied before all other commands involving the entity (which would not necessarily be true, if memory serves). Optimizing `Commands::spawn` this way does feel possible, but it will require careful thought (and maybe some additional checks), which deserves its own PR. For now, it has the same performance characteristics of the current `Commands::spawn_bundle` on main. **Note that 99% of this PR is simple renames and refactors. The only code that needs careful scrutiny is the new `World::spawn()` impl, which is relatively straightforward, but it has some new unsafe code (which re-uses battle tested BundlerSpawner code path).** --- ## Changelog - All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input - All instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api - World and Commands now have `spawn_empty()`, which is equivalent to the old `spawn()` behavior. ## Migration Guide ```rust // Old (0.8): commands .spawn() .insert_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): commands.spawn_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): let entity = commands.spawn().id(); // New (0.9) let entity = commands.spawn_empty().id(); // Old (0.8) let entity = world.spawn().id(); // New (0.9) let entity = world.spawn_empty(); ```
2022-09-23 19:55:54 +00:00
},
CameraController::default(),
ShadowFilteringMethod::Hardware2x2,
Spawn now takes a Bundle (#6054) # Objective Now that we can consolidate Bundles and Components under a single insert (thanks to #2975 and #6039), almost 100% of world spawns now look like `world.spawn().insert((Some, Tuple, Here))`. Spawning an entity without any components is an extremely uncommon pattern, so it makes sense to give spawn the "first class" ergonomic api. This consolidated api should be made consistent across all spawn apis (such as World and Commands). ## Solution All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input: ```rust // before: commands .spawn() .insert((A, B, C)); world .spawn() .insert((A, B, C); // after commands.spawn((A, B, C)); world.spawn((A, B, C)); ``` All existing instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api. A new `spawn_empty` has been added, replacing the old `spawn` api. By allowing `world.spawn(some_bundle)` to replace `world.spawn().insert(some_bundle)`, this opened the door to removing the initial entity allocation in the "empty" archetype / table done in `spawn()` (and subsequent move to the actual archetype in `.insert(some_bundle)`). This improves spawn performance by over 10%: ![image](https://user-images.githubusercontent.com/2694663/191627587-4ab2f949-4ccd-4231-80eb-80dd4d9ad6b9.png) To take this measurement, I added a new `world_spawn` benchmark. Unfortunately, optimizing `Commands::spawn` is slightly less trivial, as Commands expose the Entity id of spawned entities prior to actually spawning. Doing the optimization would (naively) require assurances that the `spawn(some_bundle)` command is applied before all other commands involving the entity (which would not necessarily be true, if memory serves). Optimizing `Commands::spawn` this way does feel possible, but it will require careful thought (and maybe some additional checks), which deserves its own PR. For now, it has the same performance characteristics of the current `Commands::spawn_bundle` on main. **Note that 99% of this PR is simple renames and refactors. The only code that needs careful scrutiny is the new `World::spawn()` impl, which is relatively straightforward, but it has some new unsafe code (which re-uses battle tested BundlerSpawner code path).** --- ## Changelog - All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input - All instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api - World and Commands now have `spawn_empty()`, which is equivalent to the old `spawn()` behavior. ## Migration Guide ```rust // Old (0.8): commands .spawn() .insert_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): commands.spawn_bundle((A, B, C)); // New (0.9) commands.spawn((A, B, C)); // Old (0.8): let entity = commands.spawn().id(); // New (0.9) let entity = commands.spawn_empty().id(); // Old (0.8) let entity = world.spawn().id(); // New (0.9) let entity = world.spawn_empty(); ```
2022-09-23 19:55:54 +00:00
));
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
for z_i32 in (-spawn_plane_depth as i32..=0).step_by(2) {
Migrate meshes and materials to required components (#15524) # Objective A big step in the migration to required components: meshes and materials! ## Solution As per the [selected proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ): - Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and `PbrBundle`. - Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`. - Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`, which wrap a `Handle<M>`. - Meshes *without* a mesh material should be rendered with a default material. The existence of a material is determined by `HasMaterial2d`/`HasMaterial3d`, which is required by `MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the generics. Previously: ```rust commands.spawn(MaterialMesh2dBundle { mesh: meshes.add(Circle::new(100.0)).into(), material: materials.add(Color::srgb(7.5, 0.0, 7.5)), transform: Transform::from_translation(Vec3::new(-200., 0., 0.)), ..default() }); ``` Now: ```rust commands.spawn(( Mesh2d(meshes.add(Circle::new(100.0))), MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))), Transform::from_translation(Vec3::new(-200., 0., 0.)), )); ``` If the mesh material is missing, previously nothing was rendered. Now, it renders a white default `ColorMaterial` in 2D and a `StandardMaterial` in 3D (this can be overridden). Below, only every other entity has a material: ![Näyttökuva 2024-09-29 181746](https://github.com/user-attachments/assets/5c8be029-d2fe-4b8c-ae89-17a72ff82c9a) ![Näyttökuva 2024-09-29 181918](https://github.com/user-attachments/assets/58adbc55-5a1e-4c7d-a2c7-ed456227b909) Why white? This is still open for discussion, but I think white makes sense for a *default* material, while *invalid* asset handles pointing to nothing should have something like a pink material to indicate that something is broken (I don't handle that in this PR yet). This is kind of a mix of Godot and Unity: Godot just renders a white material for non-existent materials, while Unity renders nothing when no materials exist, but renders pink for invalid materials. I can also change the default material to pink if that is preferable though. ## Testing I ran some 2D and 3D examples to test if anything changed visually. I have not tested all examples or features yet however. If anyone wants to test more extensively, it would be appreciated! ## Implementation Notes - The relationship between `bevy_render` and `bevy_pbr` is weird here. `bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all of the material logic, and `bevy_render` doesn't depend on it. I feel like the two crates should be refactored in some way, but I think that's out of scope for this PR. - I didn't migrate meshlets to required components yet. That can probably be done in a follow-up, as this is already a huge PR. - It is becoming increasingly clear to me that we really, *really* want to disallow raw asset handles as components. They caused me a *ton* of headache here already, and it took me a long time to find every place that queried for them or inserted them directly on entities, since there were no compiler errors for it. If we don't remove the `Component` derive, I expect raw asset handles to be a *huge* footgun for users as we transition to wrapper components, especially as handles as components have been the norm so far. I personally consider this to be a blocker for 0.15: we need to migrate to wrapper components for asset handles everywhere, and remove the `Component` derive. Also see https://github.com/bevyengine/bevy/issues/14124. --- ## Migration Guide Asset handles for meshes and mesh materials must now be wrapped in the `Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d` components for 2D and 3D respectively. Raw handles as components no longer render meshes. Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and `PbrBundle` have been deprecated. Instead, use the mesh and material components directly. Previously: ```rust commands.spawn(MaterialMesh2dBundle { mesh: meshes.add(Circle::new(100.0)).into(), material: materials.add(Color::srgb(7.5, 0.0, 7.5)), transform: Transform::from_translation(Vec3::new(-200., 0., 0.)), ..default() }); ``` Now: ```rust commands.spawn(( Mesh2d(meshes.add(Circle::new(100.0))), MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))), Transform::from_translation(Vec3::new(-200., 0., 0.)), )); ``` If the mesh material is missing, a white default material is now used. Previously, nothing was rendered if the material was missing. The `WithMesh2d` and `WithMesh3d` query filter type aliases have also been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`. --------- Co-authored-by: Tim Blackbird <justthecooldude@gmail.com> Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-01 21:33:17 +00:00
commands.spawn((
Mesh3d(sphere_handle.clone()),
MeshMaterial3d(white_handle.clone()),
Transform::from_xyz(
0.0,
if z_i32 % 4 == 0 {
spawn_height
} else {
sphere_radius
},
z_i32 as f32,
),
Migrate meshes and materials to required components (#15524) # Objective A big step in the migration to required components: meshes and materials! ## Solution As per the [selected proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ): - Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and `PbrBundle`. - Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`. - Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`, which wrap a `Handle<M>`. - Meshes *without* a mesh material should be rendered with a default material. The existence of a material is determined by `HasMaterial2d`/`HasMaterial3d`, which is required by `MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the generics. Previously: ```rust commands.spawn(MaterialMesh2dBundle { mesh: meshes.add(Circle::new(100.0)).into(), material: materials.add(Color::srgb(7.5, 0.0, 7.5)), transform: Transform::from_translation(Vec3::new(-200., 0., 0.)), ..default() }); ``` Now: ```rust commands.spawn(( Mesh2d(meshes.add(Circle::new(100.0))), MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))), Transform::from_translation(Vec3::new(-200., 0., 0.)), )); ``` If the mesh material is missing, previously nothing was rendered. Now, it renders a white default `ColorMaterial` in 2D and a `StandardMaterial` in 3D (this can be overridden). Below, only every other entity has a material: ![Näyttökuva 2024-09-29 181746](https://github.com/user-attachments/assets/5c8be029-d2fe-4b8c-ae89-17a72ff82c9a) ![Näyttökuva 2024-09-29 181918](https://github.com/user-attachments/assets/58adbc55-5a1e-4c7d-a2c7-ed456227b909) Why white? This is still open for discussion, but I think white makes sense for a *default* material, while *invalid* asset handles pointing to nothing should have something like a pink material to indicate that something is broken (I don't handle that in this PR yet). This is kind of a mix of Godot and Unity: Godot just renders a white material for non-existent materials, while Unity renders nothing when no materials exist, but renders pink for invalid materials. I can also change the default material to pink if that is preferable though. ## Testing I ran some 2D and 3D examples to test if anything changed visually. I have not tested all examples or features yet however. If anyone wants to test more extensively, it would be appreciated! ## Implementation Notes - The relationship between `bevy_render` and `bevy_pbr` is weird here. `bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all of the material logic, and `bevy_render` doesn't depend on it. I feel like the two crates should be refactored in some way, but I think that's out of scope for this PR. - I didn't migrate meshlets to required components yet. That can probably be done in a follow-up, as this is already a huge PR. - It is becoming increasingly clear to me that we really, *really* want to disallow raw asset handles as components. They caused me a *ton* of headache here already, and it took me a long time to find every place that queried for them or inserted them directly on entities, since there were no compiler errors for it. If we don't remove the `Component` derive, I expect raw asset handles to be a *huge* footgun for users as we transition to wrapper components, especially as handles as components have been the norm so far. I personally consider this to be a blocker for 0.15: we need to migrate to wrapper components for asset handles everywhere, and remove the `Component` derive. Also see https://github.com/bevyengine/bevy/issues/14124. --- ## Migration Guide Asset handles for meshes and mesh materials must now be wrapped in the `Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d` components for 2D and 3D respectively. Raw handles as components no longer render meshes. Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and `PbrBundle` have been deprecated. Instead, use the mesh and material components directly. Previously: ```rust commands.spawn(MaterialMesh2dBundle { mesh: meshes.add(Circle::new(100.0)).into(), material: materials.add(Color::srgb(7.5, 0.0, 7.5)), transform: Transform::from_translation(Vec3::new(-200., 0., 0.)), ..default() }); ``` Now: ```rust commands.spawn(( Mesh2d(meshes.add(Circle::new(100.0))), MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))), Transform::from_translation(Vec3::new(-200., 0., 0.)), )); ``` If the mesh material is missing, a white default material is now used. Previously, nothing was rendered if the material was missing. The `WithMesh2d` and `WithMesh3d` query filter type aliases have also been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`. --------- Co-authored-by: Tim Blackbird <justthecooldude@gmail.com> Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-01 21:33:17 +00:00
));
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
}
// ground plane
Deprecate shapes in `bevy_render::mesh::shape` (#11773) # Objective #11431 and #11688 implemented meshing support for Bevy's new geometric primitives. The next step is to deprecate the shapes in `bevy_render::mesh::shape` and to later remove them completely for 0.14. ## Solution Deprecate the shapes and reduce code duplication by utilizing the primitive meshing API for the old shapes where possible. Note that some shapes have behavior that can't be exactly reproduced with the new primitives yet: - `Box` is more of an AABB with min/max extents - `Plane` supports a subdivision count - `Quad` has a `flipped` property These types have not been changed to utilize the new primitives yet. --- ## Changelog - Deprecated all shapes in `bevy_render::mesh::shape` - Changed all examples to use new primitives for meshing ## Migration Guide Bevy has previously used rendering-specific types like `UVSphere` and `Quad` for primitive mesh shapes. These have now been deprecated to use the geometric primitives newly introduced in version 0.13. Some examples: ```rust let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0)); let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0)); let before = meshes.add(shape::Quad::default()); let after = meshes.add(Rectangle::default()); let before = meshes.add(shape::Plane::from_size(5.0)); // The surface normal can now also be specified when using `new` let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0)); let before = meshes.add( Mesh::try_from(shape::Icosphere { radius: 0.5, subdivisions: 5, }) .unwrap(), ); let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap()); ```
2024-02-08 18:01:34 +00:00
let plane_size = 2.0 * spawn_plane_depth;
Migrate meshes and materials to required components (#15524) # Objective A big step in the migration to required components: meshes and materials! ## Solution As per the [selected proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ): - Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and `PbrBundle`. - Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`. - Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`, which wrap a `Handle<M>`. - Meshes *without* a mesh material should be rendered with a default material. The existence of a material is determined by `HasMaterial2d`/`HasMaterial3d`, which is required by `MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the generics. Previously: ```rust commands.spawn(MaterialMesh2dBundle { mesh: meshes.add(Circle::new(100.0)).into(), material: materials.add(Color::srgb(7.5, 0.0, 7.5)), transform: Transform::from_translation(Vec3::new(-200., 0., 0.)), ..default() }); ``` Now: ```rust commands.spawn(( Mesh2d(meshes.add(Circle::new(100.0))), MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))), Transform::from_translation(Vec3::new(-200., 0., 0.)), )); ``` If the mesh material is missing, previously nothing was rendered. Now, it renders a white default `ColorMaterial` in 2D and a `StandardMaterial` in 3D (this can be overridden). Below, only every other entity has a material: ![Näyttökuva 2024-09-29 181746](https://github.com/user-attachments/assets/5c8be029-d2fe-4b8c-ae89-17a72ff82c9a) ![Näyttökuva 2024-09-29 181918](https://github.com/user-attachments/assets/58adbc55-5a1e-4c7d-a2c7-ed456227b909) Why white? This is still open for discussion, but I think white makes sense for a *default* material, while *invalid* asset handles pointing to nothing should have something like a pink material to indicate that something is broken (I don't handle that in this PR yet). This is kind of a mix of Godot and Unity: Godot just renders a white material for non-existent materials, while Unity renders nothing when no materials exist, but renders pink for invalid materials. I can also change the default material to pink if that is preferable though. ## Testing I ran some 2D and 3D examples to test if anything changed visually. I have not tested all examples or features yet however. If anyone wants to test more extensively, it would be appreciated! ## Implementation Notes - The relationship between `bevy_render` and `bevy_pbr` is weird here. `bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all of the material logic, and `bevy_render` doesn't depend on it. I feel like the two crates should be refactored in some way, but I think that's out of scope for this PR. - I didn't migrate meshlets to required components yet. That can probably be done in a follow-up, as this is already a huge PR. - It is becoming increasingly clear to me that we really, *really* want to disallow raw asset handles as components. They caused me a *ton* of headache here already, and it took me a long time to find every place that queried for them or inserted them directly on entities, since there were no compiler errors for it. If we don't remove the `Component` derive, I expect raw asset handles to be a *huge* footgun for users as we transition to wrapper components, especially as handles as components have been the norm so far. I personally consider this to be a blocker for 0.15: we need to migrate to wrapper components for asset handles everywhere, and remove the `Component` derive. Also see https://github.com/bevyengine/bevy/issues/14124. --- ## Migration Guide Asset handles for meshes and mesh materials must now be wrapped in the `Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d` components for 2D and 3D respectively. Raw handles as components no longer render meshes. Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and `PbrBundle` have been deprecated. Instead, use the mesh and material components directly. Previously: ```rust commands.spawn(MaterialMesh2dBundle { mesh: meshes.add(Circle::new(100.0)).into(), material: materials.add(Color::srgb(7.5, 0.0, 7.5)), transform: Transform::from_translation(Vec3::new(-200., 0., 0.)), ..default() }); ``` Now: ```rust commands.spawn(( Mesh2d(meshes.add(Circle::new(100.0))), MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))), Transform::from_translation(Vec3::new(-200., 0., 0.)), )); ``` If the mesh material is missing, a white default material is now used. Previously, nothing was rendered if the material was missing. The `WithMesh2d` and `WithMesh3d` query filter type aliases have also been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`. --------- Co-authored-by: Tim Blackbird <justthecooldude@gmail.com> Co-authored-by: Carter Anderson <mcanders1@gmail.com>
2024-10-01 21:33:17 +00:00
commands.spawn((
Mesh3d(meshes.add(Plane3d::default().mesh().size(plane_size, plane_size))),
MeshMaterial3d(white_handle),
));
let style = TextStyle::default();
commands
Simplified `ui_stack_system` (#9889) # Objective `ui_stack_system` generates a tree of `StackingContexts` which it then flattens to get the `UiStack`. But there's no need to construct a new tree. We can query for nodes with a global `ZIndex`, add those nodes to the root nodes list and then build the `UiStack` from a walk of the existing layout tree, ignoring any branches that have a global `Zindex`. Fixes #9877 ## Solution Split the `ZIndex` enum into two separate components, `ZIndex` and `GlobalZIndex` Query for nodes with a `GlobalZIndex`, add those nodes to the root nodes list and then build the `UiStack` from a walk of the existing layout tree, filtering branches by `Without<GlobalZIndex>` so we don't revisit nodes. ``` cargo run --profile stress-test --features trace_tracy --example many_buttons ``` <img width="672" alt="ui-stack-system-walk-split-enum" src="https://github.com/bevyengine/bevy/assets/27962798/11e357a5-477f-4804-8ada-c4527c009421"> (Yellow is this PR, red is main) --- ## Changelog `Zindex` * The `ZIndex` enum has been split into two separate components `ZIndex` (which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces `ZIndex::Global`). An entity can have both a `ZIndex` and `GlobalZIndex`, in comparisons `ZIndex` breaks ties if two `GlobalZIndex` values are equal. `ui_stack_system` * Instead of generating a tree of `StackingContexts`, query for nodes with a `GlobalZIndex`, add those nodes to the root nodes list and then build the `UiStack` from a walk of the existing layout tree, filtering branches by `Without<GlobalZIndex` so we don't revisit nodes. ## Migration Guide The `ZIndex` enum has been split into two separate components `ZIndex` (which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces `ZIndex::Global`). An entity can have both a `ZIndex` and `GlobalZIndex`, in comparisons `ZIndex` breaks ties if two `GlobalZindex` values are equal. --------- Co-authored-by: Gabriel Bourgeois <gabriel.bourgeoisv4si@gmail.com> Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
2024-09-30 18:43:57 +00:00
.spawn((
NodeBundle {
style: Style {
position_type: PositionType::Absolute,
padding: UiRect::all(Val::Px(5.0)),
..default()
},
background_color: Color::BLACK.with_alpha(0.75).into(),
..default()
},
Simplified `ui_stack_system` (#9889) # Objective `ui_stack_system` generates a tree of `StackingContexts` which it then flattens to get the `UiStack`. But there's no need to construct a new tree. We can query for nodes with a global `ZIndex`, add those nodes to the root nodes list and then build the `UiStack` from a walk of the existing layout tree, ignoring any branches that have a global `Zindex`. Fixes #9877 ## Solution Split the `ZIndex` enum into two separate components, `ZIndex` and `GlobalZIndex` Query for nodes with a `GlobalZIndex`, add those nodes to the root nodes list and then build the `UiStack` from a walk of the existing layout tree, filtering branches by `Without<GlobalZIndex>` so we don't revisit nodes. ``` cargo run --profile stress-test --features trace_tracy --example many_buttons ``` <img width="672" alt="ui-stack-system-walk-split-enum" src="https://github.com/bevyengine/bevy/assets/27962798/11e357a5-477f-4804-8ada-c4527c009421"> (Yellow is this PR, red is main) --- ## Changelog `Zindex` * The `ZIndex` enum has been split into two separate components `ZIndex` (which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces `ZIndex::Global`). An entity can have both a `ZIndex` and `GlobalZIndex`, in comparisons `ZIndex` breaks ties if two `GlobalZIndex` values are equal. `ui_stack_system` * Instead of generating a tree of `StackingContexts`, query for nodes with a `GlobalZIndex`, add those nodes to the root nodes list and then build the `UiStack` from a walk of the existing layout tree, filtering branches by `Without<GlobalZIndex` so we don't revisit nodes. ## Migration Guide The `ZIndex` enum has been split into two separate components `ZIndex` (which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces `ZIndex::Global`). An entity can have both a `ZIndex` and `GlobalZIndex`, in comparisons `ZIndex` breaks ties if two `GlobalZindex` values are equal. --------- Co-authored-by: Gabriel Bourgeois <gabriel.bourgeoisv4si@gmail.com> Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com> Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
2024-09-30 18:43:57 +00:00
GlobalZIndex(i32::MAX),
))
.with_children(|c| {
c.spawn(TextBundle::from_sections([
TextSection::new("Controls:\n", style.clone()),
TextSection::new("R / Z - reset biases to default / zero\n", style.clone()),
TextSection::new(
"L - switch between directional and point lights [",
style.clone(),
),
TextSection::new("DirectionalLight", style.clone()),
TextSection::new("]\n", style.clone()),
TextSection::new(
"F - switch directional light filter methods [",
style.clone(),
),
TextSection::new("Hardware2x2", style.clone()),
TextSection::new("]\n", style.clone()),
TextSection::new("1/2 - change point light depth bias [", style.clone()),
TextSection::new("0.00", style.clone()),
TextSection::new("]\n", style.clone()),
TextSection::new("3/4 - change point light normal bias [", style.clone()),
TextSection::new("0.0", style.clone()),
TextSection::new("]\n", style.clone()),
TextSection::new("5/6 - change direction light depth bias [", style.clone()),
TextSection::new("0.00", style.clone()),
TextSection::new("]\n", style.clone()),
TextSection::new(
"7/8 - change direction light normal bias [",
style.clone(),
),
TextSection::new("0.0", style.clone()),
TextSection::new("]\n", style.clone()),
TextSection::new(
"left/right/up/down/pgup/pgdown - adjust light position (looking at 0,0,0) [",
style.clone(),
),
TextSection::new(
format!("{:.1},", light_transform.translation.x),
style.clone(),
),
TextSection::new(
format!(" {:.1},", light_transform.translation.y),
style.clone(),
),
TextSection::new(
format!(" {:.1}", light_transform.translation.z),
style.clone(),
),
TextSection::new("]\n", style.clone()),
]));
});
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
}
fn toggle_light(
input: Res<ButtonInput<KeyCode>>,
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
mut point_lights: Query<&mut PointLight>,
mut directional_lights: Query<&mut DirectionalLight>,
mut example_text: Query<&mut Text>,
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
) {
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::KeyL) {
for mut light in &mut point_lights {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.intensity = if light.intensity == 0.0 {
example_text.single_mut().sections[3].value = "PointLight".to_string();
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
100000000.0
} else {
0.0
};
}
for mut light in &mut directional_lights {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.illuminance = if light.illuminance == 0.0 {
example_text.single_mut().sections[3].value = "DirectionalLight".to_string();
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
100000.0
} else {
0.0
};
}
}
}
fn adjust_light_position(
input: Res<ButtonInput<KeyCode>>,
mut lights: Query<&mut Transform, With<Lights>>,
mut example_text: Query<&mut Text>,
) {
let mut offset = Vec3::ZERO;
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::ArrowLeft) {
offset.x -= 1.0;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::ArrowRight) {
offset.x += 1.0;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::ArrowUp) {
offset.z -= 1.0;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::ArrowDown) {
offset.z += 1.0;
}
if input.just_pressed(KeyCode::PageDown) {
offset.y -= 1.0;
}
if input.just_pressed(KeyCode::PageUp) {
offset.y += 1.0;
}
if offset != Vec3::ZERO {
let mut example_text = example_text.single_mut();
for mut light in &mut lights {
light.translation += offset;
light.look_at(Vec3::ZERO, Vec3::Y);
example_text.sections[21].value = format!("{:.1},", light.translation.x);
example_text.sections[22].value = format!(" {:.1},", light.translation.y);
example_text.sections[23].value = format!(" {:.1}", light.translation.z);
}
}
}
fn cycle_filter_methods(
input: Res<ButtonInput<KeyCode>>,
mut filter_methods: Query<&mut ShadowFilteringMethod>,
mut example_text: Query<&mut Text>,
) {
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::KeyF) {
for mut filter_method in &mut filter_methods {
let filter_method_string;
*filter_method = match *filter_method {
ShadowFilteringMethod::Hardware2x2 => {
filter_method_string = "Gaussian".to_string();
ShadowFilteringMethod::Gaussian
}
ShadowFilteringMethod::Gaussian => {
filter_method_string = "Temporal".to_string();
ShadowFilteringMethod::Temporal
}
ShadowFilteringMethod::Temporal => {
filter_method_string = "Hardware2x2".to_string();
ShadowFilteringMethod::Hardware2x2
}
};
example_text.single_mut().sections[6].value = filter_method_string;
}
}
}
fn adjust_point_light_biases(
input: Res<ButtonInput<KeyCode>>,
mut query: Query<&mut PointLight>,
mut example_text: Query<&mut Text>,
) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
let depth_bias_step_size = 0.01;
let normal_bias_step_size = 0.1;
for mut light in &mut query {
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit1) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_depth_bias -= depth_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit2) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_depth_bias += depth_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit3) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_normal_bias -= normal_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit4) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_normal_bias += normal_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::KeyR) {
light.shadow_depth_bias = PointLight::DEFAULT_SHADOW_DEPTH_BIAS;
light.shadow_normal_bias = PointLight::DEFAULT_SHADOW_NORMAL_BIAS;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::KeyZ) {
light.shadow_depth_bias = 0.0;
light.shadow_normal_bias = 0.0;
}
example_text.single_mut().sections[9].value = format!("{:.2}", light.shadow_depth_bias);
example_text.single_mut().sections[12].value = format!("{:.1}", light.shadow_normal_bias);
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
}
}
fn adjust_directional_light_biases(
input: Res<ButtonInput<KeyCode>>,
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
mut query: Query<&mut DirectionalLight>,
mut example_text: Query<&mut Text>,
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
) {
let depth_bias_step_size = 0.01;
let normal_bias_step_size = 0.1;
for mut light in &mut query {
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit5) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_depth_bias -= depth_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit6) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_depth_bias += depth_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit7) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_normal_bias -= normal_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::Digit8) {
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
light.shadow_normal_bias += normal_bias_step_size;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::KeyR) {
light.shadow_depth_bias = DirectionalLight::DEFAULT_SHADOW_DEPTH_BIAS;
light.shadow_normal_bias = DirectionalLight::DEFAULT_SHADOW_NORMAL_BIAS;
}
Update winit dependency to 0.29 (#10702) # Objective - Update winit dependency to 0.29 ## Changelog ### KeyCode changes - Removed `ScanCode`, as it was [replaced by KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292). - `ReceivedCharacter.char` is now a `SmolStr`, [relevant doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text). - Changed most `KeyCode` values, and added more. KeyCode has changed meaning. With this PR, it refers to physical position on keyboard rather than the printed letter on keyboard keys. In practice this means: - On QWERTY keyboard layouts, nothing changes - On any other keyboard layout, `KeyCode` no longer reflects the label on key. - This is "good". In bevy 0.12, when you used WASD for movement, users with non-QWERTY keyboards couldn't play your game! This was especially bad for non-latin keyboards. Now, WASD represents the physical keys. A French player will press the ZQSD keys, which are near each other, Kyrgyz players will use "Цфыв". - This is "bad" as well. You can't know in advance what the label of the key for input is. Your UI says "press WASD to move", even if in reality, they should be pressing "ZQSD" or "Цфыв". You also no longer can use `KeyCode` for text inputs. In any case, it was a pretty bad API for text input. You should use `ReceivedCharacter` now instead. ### Other changes - Use `web-time` rather than `instant` crate. (https://github.com/rust-windowing/winit/pull/2836) - winit did split `run_return` in `run_onDemand` and `pump_events`, I did the same change in bevy_winit and used `pump_events`. - Removed `return_from_run` from `WinitSettings` as `winit::run` now returns on supported platforms. - I left the example "return_after_run" as I think it's still useful. - This winit change is done partly to allow to create a new window after quitting all windows: https://github.com/emilk/egui/issues/1918 ; this PR doesn't address. - added `width` and `height` properties in the `canvas` from wasm example (https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168) ## Known regressions (important follow ups?) - Provide an API for reacting when a specific key from current layout was released. - possible solutions: use winit::Key from winit::KeyEvent ; mapping between KeyCode and Key ; or . - We don't receive characters through alt+numpad (e.g. alt + 151 = "ù") anymore ; reproduced on winit example "ime". maybe related to https://github.com/rust-windowing/winit/issues/2945 - (windows) Window content doesn't refresh at all when resizing. By reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect we should just fire a `window.request_redraw();` from `AboutToWait`, and handle actual redrawing within `RedrawRequested`. I'm not sure how to move all that code so I'd appreciate it to be a follow up. - (windows) unreleased winit fix for using set_control_flow in AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm not sure what the implications are, but that feels bad 🤔 ## Follow up I'd like to avoid bloating this PR, here are a few follow up tasks worthy of a separate PR, or new issue to track them once this PR is closed, as they would either complicate reviews, or at risk of being controversial: - remove CanvasParentResizePlugin (https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856) - avoid mentionning explicitly winit in docs from bevy_window ? - NamedKey integration on bevy_input: https://github.com/rust-windowing/winit/pull/3143 introduced a new NamedKey variant. I implemented it only on the converters but we'd benefit making the same changes to bevy_input. - Add more info in KeyboardInput https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313 - https://github.com/bevyengine/bevy/pull/9905 added a workaround on a bug allegedly fixed by winit 0.29. We should check if it's still necessary. - update to raw_window_handle 0.6 - blocked by wgpu - Rename `KeyCode` to `PhysicalKeyCode` https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015 - remove `instant` dependency, [replaced by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd need to update to : - fastrand >= 2.0 - [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7 - [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0 - Verify license, see [discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800) - we might be missing a short notice or description of changes made - Consider using https://github.com/rust-windowing/cursor-icon directly rather than vendoring it in bevy. - investigate [this unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986) (`winit_window.canvas().unwrap();`) - Use more good things about winit's update - https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428 ## Migration Guide This PR should have one.
2023-12-21 07:40:47 +00:00
if input.just_pressed(KeyCode::KeyZ) {
light.shadow_depth_bias = 0.0;
light.shadow_normal_bias = 0.0;
}
example_text.single_mut().sections[15].value = format!("{:.2}", light.shadow_depth_bias);
example_text.single_mut().sections[18].value = format!("{:.1}", light.shadow_normal_bias);
Scale normal bias by texel size (#26) * 3d_scene_pipelined: Use a shallower directional light angle to provoke acne * cornell_box_pipelined: Remove bias tweaks * bevy_pbr2: Simplify shadow biases by moving them to linear depth * bevy_pbr2: Do not use DepthBiasState * bevy_pbr2: Do not use bilinear filtering for sampling depth textures * pbr.wgsl: Remove unnecessary comment * bevy_pbr2: Do manual shadow map depth comparisons for more flexibility * examples: Add shadow_biases_pipelined example This is useful for stress testing biases. * bevy_pbr2: Scale the point light normal bias by the shadow map texel size This allows the normal bias to be small close to the light source where the shadow map texel to screen texel ratio is high, but is appropriately large further away from the light source where the shadow map texel can easily cover multiple screen texels. * shadow_biases_pipelined: Add support for toggling directional / point light * shadow_biases_pipelined: Cleanup * bevy_pbr2: Scale the directional light normal bias by the shadow map texel size * shadow_biases_pipelined: Fit the orthographic projection around the scene * bevy_pbr2: Directional lights should have no shadows outside their projection Before this change, sampling a fragment position from outside the ndc volume would result in the return sample being clamped to the edge in x,y or possibly always casting a shadow for fragment positions past the orthographic projection's far plane. * bevy_pbr2: Fix the default directional light normal bias * Revert "bevy_pbr2: Do manual shadow map depth comparisons for more flexibility" This reverts commit 7df1bab38a42d8a33bc50ca583d4be37bd9c9f0d. * shadow_biases_pipelined: Adjust directional light normal bias in 0.1 increments * pbr.wgsl: Add a couple of clarifying comments * Revert "bevy_pbr2: Do not use bilinear filtering for sampling depth textures" This reverts commit f53baab0232ce218866a45cad6902b470f4cf2c4. * shadow_biases_pipelined: Print usage to terminal
2021-07-19 19:20:59 +00:00
}
}