bevy/examples/window/screenshot.rs

96 lines
2.6 KiB
Rust
Raw Normal View History

//! An example showing how to save screenshots to disk
use bevy::prelude::*;
Rewrite screenshots. (#14833) # Objective Rewrite screenshotting to be able to accept any `RenderTarget`. Closes #12478 ## Solution Previously, screenshotting relied on setting a variety of state on the requested window. When extracted, the window's `swap_chain_texture_view` property would be swapped out with a texture_view created that frame for the screenshot pipeline to write back to the cpu. Besides being tightly coupled to window in a way that prevented screenshotting other render targets, this approach had the drawback of relying on the implicit state of `swap_chain_texture_view` being returned from a `NormalizedRenderTarget` when view targets were prepared. Because property is set every frame for windows, that wasn't a problem, but poses a problem for render target images. Namely, to do the equivalent trick, we'd have to replace the `GpuImage`'s texture view, and somehow restore it later. As such, this PR creates a new `prepare_view_textures` system which runs before `prepare_view_targets` that allows a new `prepare_screenshots` system to be sandwiched between and overwrite the render targets texture view if a screenshot has been requested that frame for the given target. Additionally, screenshotting itself has been changed to use a component + observer pattern. We now spawn a `Screenshot` component into the world, whose lifetime is tracked with a series of marker components. When the screenshot is read back to the CPU, we send the image over a channel back to the main world where an observer fires on the screenshot entity before being despawned the next frame. This allows the user to access resources in their save callback that might be useful (e.g. uploading the screenshot over the network, etc.). ## Testing ![image](https://github.com/user-attachments/assets/48f19aed-d9e1-4058-bb17-82b37f992b7b) TODO: - [x] Web - [ ] Manual texture view --- ## Showcase render to texture example: <img src="https://github.com/user-attachments/assets/612ac47b-8a24-4287-a745-3051837963b0" width=200/> web saving still works: <img src="https://github.com/user-attachments/assets/e2a15b17-1ff5-4006-ab2a-e5cc74888b9c" width=200/> ## Migration Guide `ScreenshotManager` has been removed. To take a screenshot, spawn a `Screenshot` entity with the specified render target and provide an observer targeting the `ScreenshotCaptured` event. See the `window/screenshot` example to see an example. --------- Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
2024-08-25 14:14:32 +00:00
use bevy::window::SystemCursorIcon;
use bevy_render::view::cursor::CursorIcon;
use bevy_render::view::screenshot::{save_to_disk, Capturing, Screenshot};
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Startup, setup)
Rewrite screenshots. (#14833) # Objective Rewrite screenshotting to be able to accept any `RenderTarget`. Closes #12478 ## Solution Previously, screenshotting relied on setting a variety of state on the requested window. When extracted, the window's `swap_chain_texture_view` property would be swapped out with a texture_view created that frame for the screenshot pipeline to write back to the cpu. Besides being tightly coupled to window in a way that prevented screenshotting other render targets, this approach had the drawback of relying on the implicit state of `swap_chain_texture_view` being returned from a `NormalizedRenderTarget` when view targets were prepared. Because property is set every frame for windows, that wasn't a problem, but poses a problem for render target images. Namely, to do the equivalent trick, we'd have to replace the `GpuImage`'s texture view, and somehow restore it later. As such, this PR creates a new `prepare_view_textures` system which runs before `prepare_view_targets` that allows a new `prepare_screenshots` system to be sandwiched between and overwrite the render targets texture view if a screenshot has been requested that frame for the given target. Additionally, screenshotting itself has been changed to use a component + observer pattern. We now spawn a `Screenshot` component into the world, whose lifetime is tracked with a series of marker components. When the screenshot is read back to the CPU, we send the image over a channel back to the main world where an observer fires on the screenshot entity before being despawned the next frame. This allows the user to access resources in their save callback that might be useful (e.g. uploading the screenshot over the network, etc.). ## Testing ![image](https://github.com/user-attachments/assets/48f19aed-d9e1-4058-bb17-82b37f992b7b) TODO: - [x] Web - [ ] Manual texture view --- ## Showcase render to texture example: <img src="https://github.com/user-attachments/assets/612ac47b-8a24-4287-a745-3051837963b0" width=200/> web saving still works: <img src="https://github.com/user-attachments/assets/e2a15b17-1ff5-4006-ab2a-e5cc74888b9c" width=200/> ## Migration Guide `ScreenshotManager` has been removed. To take a screenshot, spawn a `Screenshot` entity with the specified render target and provide an observer targeting the `ScreenshotCaptured` event. See the `window/screenshot` example to see an example. --------- Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
2024-08-25 14:14:32 +00:00
.add_systems(Update, (screenshot_on_spacebar, screenshot_saving))
.run();
}
fn screenshot_on_spacebar(
Rewrite screenshots. (#14833) # Objective Rewrite screenshotting to be able to accept any `RenderTarget`. Closes #12478 ## Solution Previously, screenshotting relied on setting a variety of state on the requested window. When extracted, the window's `swap_chain_texture_view` property would be swapped out with a texture_view created that frame for the screenshot pipeline to write back to the cpu. Besides being tightly coupled to window in a way that prevented screenshotting other render targets, this approach had the drawback of relying on the implicit state of `swap_chain_texture_view` being returned from a `NormalizedRenderTarget` when view targets were prepared. Because property is set every frame for windows, that wasn't a problem, but poses a problem for render target images. Namely, to do the equivalent trick, we'd have to replace the `GpuImage`'s texture view, and somehow restore it later. As such, this PR creates a new `prepare_view_textures` system which runs before `prepare_view_targets` that allows a new `prepare_screenshots` system to be sandwiched between and overwrite the render targets texture view if a screenshot has been requested that frame for the given target. Additionally, screenshotting itself has been changed to use a component + observer pattern. We now spawn a `Screenshot` component into the world, whose lifetime is tracked with a series of marker components. When the screenshot is read back to the CPU, we send the image over a channel back to the main world where an observer fires on the screenshot entity before being despawned the next frame. This allows the user to access resources in their save callback that might be useful (e.g. uploading the screenshot over the network, etc.). ## Testing ![image](https://github.com/user-attachments/assets/48f19aed-d9e1-4058-bb17-82b37f992b7b) TODO: - [x] Web - [ ] Manual texture view --- ## Showcase render to texture example: <img src="https://github.com/user-attachments/assets/612ac47b-8a24-4287-a745-3051837963b0" width=200/> web saving still works: <img src="https://github.com/user-attachments/assets/e2a15b17-1ff5-4006-ab2a-e5cc74888b9c" width=200/> ## Migration Guide `ScreenshotManager` has been removed. To take a screenshot, spawn a `Screenshot` entity with the specified render target and provide an observer targeting the `ScreenshotCaptured` event. See the `window/screenshot` example to see an example. --------- Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
2024-08-25 14:14:32 +00:00
mut commands: Commands,
input: Res<ButtonInput<KeyCode>>,
mut counter: Local<u32>,
) {
if input.just_pressed(KeyCode::Space) {
let path = format!("./screenshot-{}.png", *counter);
*counter += 1;
Rewrite screenshots. (#14833) # Objective Rewrite screenshotting to be able to accept any `RenderTarget`. Closes #12478 ## Solution Previously, screenshotting relied on setting a variety of state on the requested window. When extracted, the window's `swap_chain_texture_view` property would be swapped out with a texture_view created that frame for the screenshot pipeline to write back to the cpu. Besides being tightly coupled to window in a way that prevented screenshotting other render targets, this approach had the drawback of relying on the implicit state of `swap_chain_texture_view` being returned from a `NormalizedRenderTarget` when view targets were prepared. Because property is set every frame for windows, that wasn't a problem, but poses a problem for render target images. Namely, to do the equivalent trick, we'd have to replace the `GpuImage`'s texture view, and somehow restore it later. As such, this PR creates a new `prepare_view_textures` system which runs before `prepare_view_targets` that allows a new `prepare_screenshots` system to be sandwiched between and overwrite the render targets texture view if a screenshot has been requested that frame for the given target. Additionally, screenshotting itself has been changed to use a component + observer pattern. We now spawn a `Screenshot` component into the world, whose lifetime is tracked with a series of marker components. When the screenshot is read back to the CPU, we send the image over a channel back to the main world where an observer fires on the screenshot entity before being despawned the next frame. This allows the user to access resources in their save callback that might be useful (e.g. uploading the screenshot over the network, etc.). ## Testing ![image](https://github.com/user-attachments/assets/48f19aed-d9e1-4058-bb17-82b37f992b7b) TODO: - [x] Web - [ ] Manual texture view --- ## Showcase render to texture example: <img src="https://github.com/user-attachments/assets/612ac47b-8a24-4287-a745-3051837963b0" width=200/> web saving still works: <img src="https://github.com/user-attachments/assets/e2a15b17-1ff5-4006-ab2a-e5cc74888b9c" width=200/> ## Migration Guide `ScreenshotManager` has been removed. To take a screenshot, spawn a `Screenshot` entity with the specified render target and provide an observer targeting the `ScreenshotCaptured` event. See the `window/screenshot` example to see an example. --------- Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
2024-08-25 14:14:32 +00:00
commands
.spawn(Screenshot::primary_window())
.observe(save_to_disk(path));
}
}
fn screenshot_saving(
mut commands: Commands,
screenshot_saving: Query<Entity, With<Capturing>>,
windows: Query<Entity, With<Window>>,
) {
let window = windows.single();
match screenshot_saving.iter().count() {
0 => {
commands.entity(window).remove::<CursorIcon>();
}
x if x > 0 => {
commands
.entity(window)
.insert(CursorIcon::from(SystemCursorIcon::Progress));
}
_ => {}
}
}
/// set up a simple 3D scene
fn setup(
mut commands: Commands,
mut meshes: ResMut<Assets<Mesh>>,
mut materials: ResMut<Assets<StandardMaterial>>,
) {
// plane
commands.spawn(PbrBundle {
Deprecate shapes in `bevy_render::mesh::shape` (#11773) # Objective #11431 and #11688 implemented meshing support for Bevy's new geometric primitives. The next step is to deprecate the shapes in `bevy_render::mesh::shape` and to later remove them completely for 0.14. ## Solution Deprecate the shapes and reduce code duplication by utilizing the primitive meshing API for the old shapes where possible. Note that some shapes have behavior that can't be exactly reproduced with the new primitives yet: - `Box` is more of an AABB with min/max extents - `Plane` supports a subdivision count - `Quad` has a `flipped` property These types have not been changed to utilize the new primitives yet. --- ## Changelog - Deprecated all shapes in `bevy_render::mesh::shape` - Changed all examples to use new primitives for meshing ## Migration Guide Bevy has previously used rendering-specific types like `UVSphere` and `Quad` for primitive mesh shapes. These have now been deprecated to use the geometric primitives newly introduced in version 0.13. Some examples: ```rust let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0)); let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0)); let before = meshes.add(shape::Quad::default()); let after = meshes.add(Rectangle::default()); let before = meshes.add(shape::Plane::from_size(5.0)); // The surface normal can now also be specified when using `new` let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0)); let before = meshes.add( Mesh::try_from(shape::Icosphere { radius: 0.5, subdivisions: 5, }) .unwrap(), ); let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap()); ```
2024-02-08 18:01:34 +00:00
mesh: meshes.add(Plane3d::default().mesh().size(5.0, 5.0)),
Migrate from `LegacyColor` to `bevy_color::Color` (#12163) # Objective - As part of the migration process we need to a) see the end effect of the migration on user ergonomics b) check for serious perf regressions c) actually migrate the code - To accomplish this, I'm going to attempt to migrate all of the remaining user-facing usages of `LegacyColor` in one PR, being careful to keep a clean commit history. - Fixes #12056. ## Solution I've chosen to use the polymorphic `Color` type as our standard user-facing API. - [x] Migrate `bevy_gizmos`. - [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs - [x] Migrate sprites - [x] Migrate UI - [x] Migrate `ColorMaterial` - [x] Migrate `MaterialMesh2D` - [x] Migrate fog - [x] Migrate lights - [x] Migrate StandardMaterial - [x] Migrate wireframes - [x] Migrate clear color - [x] Migrate text - [x] Migrate gltf loader - [x] Register color types for reflection - [x] Remove `LegacyColor` - [x] Make sure CI passes Incidental improvements to ease migration: - added `Color::srgba_u8`, `Color::srgba_from_array` and friends - added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the `Alpha` trait - add and immediately deprecate (lol) `Color::rgb` and friends in favor of more explicit and consistent `Color::srgb` - standardized on white and black for most example text colors - added vector field traits to `LinearRgba`: ~~`Add`, `Sub`, `AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications and divisions do not scale alpha. `Add` and `Sub` have been cut from this PR. - added `LinearRgba` and `Srgba` `RED/GREEN/BLUE` - added `LinearRgba_to_f32_array` and `LinearRgba::to_u32` ## Migration Guide Bevy's color types have changed! Wherever you used a `bevy::render::Color`, a `bevy::color::Color` is used instead. These are quite similar! Both are enums storing a color in a specific color space (or to be more precise, using a specific color model). However, each of the different color models now has its own type. TODO... - `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`, `Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`, `Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`. - `Color::set_a` and `Color::a` is now `Color::set_alpha` and `Color::alpha`. These are part of the `Alpha` trait in `bevy_color`. - `Color::is_fully_transparent` is now part of the `Alpha` trait in `bevy_color` - `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for `g`, `b` `h`, `s` and `l` have been removed due to causing silent relatively expensive conversions. Convert your `Color` into the desired color space, perform your operations there, and then convert it back into a polymorphic `Color` enum. - `Color::hex` is now `Srgba::hex`. Call `.into` or construct a `Color::Srgba` variant manually to convert it. - `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`, `ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now store a `LinearRgba`, rather than a polymorphic `Color` - `Color::rgb_linear` and `Color::rgba_linear` are now `Color::linear_rgb` and `Color::linear_rgba` - The various CSS color constants are no longer stored directly on `Color`. Instead, they're defined in the `Srgba` color space, and accessed via `bevy::color::palettes::css`. Call `.into()` on them to convert them into a `Color` for quick debugging use, and consider using the much prettier `tailwind` palette for prototyping. - The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with the standard naming. - Vector field arithmetic operations on `Color` (add, subtract, multiply and divide by a f32) have been removed. Instead, convert your colors into `LinearRgba` space, and perform your operations explicitly there. This is particularly relevant when working with emissive or HDR colors, whose color channel values are routinely outside of the ordinary 0 to 1 range. - `Color::as_linear_rgba_f32` has been removed. Call `LinearRgba::to_f32_array` instead, converting if needed. - `Color::as_linear_rgba_u32` has been removed. Call `LinearRgba::to_u32` instead, converting if needed. - Several other color conversion methods to transform LCH or HSL colors into float arrays or `Vec` types have been removed. Please reimplement these externally or open a PR to re-add them if you found them particularly useful. - Various methods on `Color` such as `rgb` or `hsl` to convert the color into a specific color space have been removed. Convert into `LinearRgba`, then to the color space of your choice. - Various implicitly-converting color value methods on `Color` such as `r`, `g`, `b` or `h` have been removed. Please convert it into the color space of your choice, then check these properties. - `Color` no longer implements `AsBindGroup`. Store a `LinearRgba` internally instead to avoid conversion costs. --------- Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com> Co-authored-by: Afonso Lage <lage.afonso@gmail.com> Co-authored-by: Rob Parrett <robparrett@gmail.com> Co-authored-by: Zachary Harrold <zac@harrold.com.au>
2024-02-29 19:35:12 +00:00
material: materials.add(Color::srgb(0.3, 0.5, 0.3)),
..default()
});
// cube
commands.spawn(PbrBundle {
Deprecate shapes in `bevy_render::mesh::shape` (#11773) # Objective #11431 and #11688 implemented meshing support for Bevy's new geometric primitives. The next step is to deprecate the shapes in `bevy_render::mesh::shape` and to later remove them completely for 0.14. ## Solution Deprecate the shapes and reduce code duplication by utilizing the primitive meshing API for the old shapes where possible. Note that some shapes have behavior that can't be exactly reproduced with the new primitives yet: - `Box` is more of an AABB with min/max extents - `Plane` supports a subdivision count - `Quad` has a `flipped` property These types have not been changed to utilize the new primitives yet. --- ## Changelog - Deprecated all shapes in `bevy_render::mesh::shape` - Changed all examples to use new primitives for meshing ## Migration Guide Bevy has previously used rendering-specific types like `UVSphere` and `Quad` for primitive mesh shapes. These have now been deprecated to use the geometric primitives newly introduced in version 0.13. Some examples: ```rust let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0)); let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0)); let before = meshes.add(shape::Quad::default()); let after = meshes.add(Rectangle::default()); let before = meshes.add(shape::Plane::from_size(5.0)); // The surface normal can now also be specified when using `new` let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0)); let before = meshes.add( Mesh::try_from(shape::Icosphere { radius: 0.5, subdivisions: 5, }) .unwrap(), ); let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap()); ```
2024-02-08 18:01:34 +00:00
mesh: meshes.add(Cuboid::default()),
Migrate from `LegacyColor` to `bevy_color::Color` (#12163) # Objective - As part of the migration process we need to a) see the end effect of the migration on user ergonomics b) check for serious perf regressions c) actually migrate the code - To accomplish this, I'm going to attempt to migrate all of the remaining user-facing usages of `LegacyColor` in one PR, being careful to keep a clean commit history. - Fixes #12056. ## Solution I've chosen to use the polymorphic `Color` type as our standard user-facing API. - [x] Migrate `bevy_gizmos`. - [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs - [x] Migrate sprites - [x] Migrate UI - [x] Migrate `ColorMaterial` - [x] Migrate `MaterialMesh2D` - [x] Migrate fog - [x] Migrate lights - [x] Migrate StandardMaterial - [x] Migrate wireframes - [x] Migrate clear color - [x] Migrate text - [x] Migrate gltf loader - [x] Register color types for reflection - [x] Remove `LegacyColor` - [x] Make sure CI passes Incidental improvements to ease migration: - added `Color::srgba_u8`, `Color::srgba_from_array` and friends - added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the `Alpha` trait - add and immediately deprecate (lol) `Color::rgb` and friends in favor of more explicit and consistent `Color::srgb` - standardized on white and black for most example text colors - added vector field traits to `LinearRgba`: ~~`Add`, `Sub`, `AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications and divisions do not scale alpha. `Add` and `Sub` have been cut from this PR. - added `LinearRgba` and `Srgba` `RED/GREEN/BLUE` - added `LinearRgba_to_f32_array` and `LinearRgba::to_u32` ## Migration Guide Bevy's color types have changed! Wherever you used a `bevy::render::Color`, a `bevy::color::Color` is used instead. These are quite similar! Both are enums storing a color in a specific color space (or to be more precise, using a specific color model). However, each of the different color models now has its own type. TODO... - `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`, `Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`, `Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`. - `Color::set_a` and `Color::a` is now `Color::set_alpha` and `Color::alpha`. These are part of the `Alpha` trait in `bevy_color`. - `Color::is_fully_transparent` is now part of the `Alpha` trait in `bevy_color` - `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for `g`, `b` `h`, `s` and `l` have been removed due to causing silent relatively expensive conversions. Convert your `Color` into the desired color space, perform your operations there, and then convert it back into a polymorphic `Color` enum. - `Color::hex` is now `Srgba::hex`. Call `.into` or construct a `Color::Srgba` variant manually to convert it. - `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`, `ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now store a `LinearRgba`, rather than a polymorphic `Color` - `Color::rgb_linear` and `Color::rgba_linear` are now `Color::linear_rgb` and `Color::linear_rgba` - The various CSS color constants are no longer stored directly on `Color`. Instead, they're defined in the `Srgba` color space, and accessed via `bevy::color::palettes::css`. Call `.into()` on them to convert them into a `Color` for quick debugging use, and consider using the much prettier `tailwind` palette for prototyping. - The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with the standard naming. - Vector field arithmetic operations on `Color` (add, subtract, multiply and divide by a f32) have been removed. Instead, convert your colors into `LinearRgba` space, and perform your operations explicitly there. This is particularly relevant when working with emissive or HDR colors, whose color channel values are routinely outside of the ordinary 0 to 1 range. - `Color::as_linear_rgba_f32` has been removed. Call `LinearRgba::to_f32_array` instead, converting if needed. - `Color::as_linear_rgba_u32` has been removed. Call `LinearRgba::to_u32` instead, converting if needed. - Several other color conversion methods to transform LCH or HSL colors into float arrays or `Vec` types have been removed. Please reimplement these externally or open a PR to re-add them if you found them particularly useful. - Various methods on `Color` such as `rgb` or `hsl` to convert the color into a specific color space have been removed. Convert into `LinearRgba`, then to the color space of your choice. - Various implicitly-converting color value methods on `Color` such as `r`, `g`, `b` or `h` have been removed. Please convert it into the color space of your choice, then check these properties. - `Color` no longer implements `AsBindGroup`. Store a `LinearRgba` internally instead to avoid conversion costs. --------- Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com> Co-authored-by: Afonso Lage <lage.afonso@gmail.com> Co-authored-by: Rob Parrett <robparrett@gmail.com> Co-authored-by: Zachary Harrold <zac@harrold.com.au>
2024-02-29 19:35:12 +00:00
material: materials.add(Color::srgb(0.8, 0.7, 0.6)),
transform: Transform::from_xyz(0.0, 0.5, 0.0),
..default()
});
// light
New Exposure and Lighting Defaults (and calibrate examples) (#11868) # Objective After adding configurable exposure, we set the default ev100 value to `7` (indoor). This brought us out of sync with Blender's configuration and defaults. This PR changes the default to `9.7` (bright indoor or very overcast outdoors), as I calibrated in #11577. This feels like a very reasonable default. The other changes generally center around tweaking Bevy's lighting defaults and examples to play nicely with this number, alongside a few other tweaks and improvements. Note that for artistic reasons I have reverted some examples, which changed to directional lights in #11581, back to point lights. Fixes #11577 --- ## Changelog - Changed `Exposure::ev100` from `7` to `9.7` to better match Blender - Renamed `ExposureSettings` to `Exposure` - `Camera3dBundle` now includes `Exposure` for discoverability - Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the middle-to-top of those ranges instead of near the bottom - Added new `AMBIENT_DAYLIGHT` constant and set that as the new `DirectionalLight` default illuminance. - `PointLight` and `SpotLight` now have a default `intensity` of 1,000,000 lumens. This makes them actually useful in the context of the new "semi-outdoor" exposure and puts them in the "cinema lighting" category instead of the "common household light" category. They are also reasonably close to the Blender default. - `AmbientLight` default has been bumped from `20` to `80`. ## Migration Guide - The increased `Exposure::ev100` means that all existing 3D lighting will need to be adjusted to match (DirectionalLights, PointLights, SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust the `Exposure::ev100` on your cameras to work nicely with your current lighting values. If you are currently relying on default intensity values, you might need to change the intensity to achieve the same effect. Note that in Bevy 0.12, point/spot lights had a different hard coded ev100 value than directional lights. In Bevy 0.13, they use the same ev100, so if you have both in your scene, the _scale_ between these light types has changed and you will likely need to adjust one or both of them.
2024-02-15 20:42:48 +00:00
commands.spawn(PointLightBundle {
point_light: PointLight {
shadows_enabled: true,
..default()
},
New Exposure and Lighting Defaults (and calibrate examples) (#11868) # Objective After adding configurable exposure, we set the default ev100 value to `7` (indoor). This brought us out of sync with Blender's configuration and defaults. This PR changes the default to `9.7` (bright indoor or very overcast outdoors), as I calibrated in #11577. This feels like a very reasonable default. The other changes generally center around tweaking Bevy's lighting defaults and examples to play nicely with this number, alongside a few other tweaks and improvements. Note that for artistic reasons I have reverted some examples, which changed to directional lights in #11581, back to point lights. Fixes #11577 --- ## Changelog - Changed `Exposure::ev100` from `7` to `9.7` to better match Blender - Renamed `ExposureSettings` to `Exposure` - `Camera3dBundle` now includes `Exposure` for discoverability - Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the middle-to-top of those ranges instead of near the bottom - Added new `AMBIENT_DAYLIGHT` constant and set that as the new `DirectionalLight` default illuminance. - `PointLight` and `SpotLight` now have a default `intensity` of 1,000,000 lumens. This makes them actually useful in the context of the new "semi-outdoor" exposure and puts them in the "cinema lighting" category instead of the "common household light" category. They are also reasonably close to the Blender default. - `AmbientLight` default has been bumped from `20` to `80`. ## Migration Guide - The increased `Exposure::ev100` means that all existing 3D lighting will need to be adjusted to match (DirectionalLights, PointLights, SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust the `Exposure::ev100` on your cameras to work nicely with your current lighting values. If you are currently relying on default intensity values, you might need to change the intensity to achieve the same effect. Note that in Bevy 0.12, point/spot lights had a different hard coded ev100 value than directional lights. In Bevy 0.13, they use the same ev100, so if you have both in your scene, the _scale_ between these light types has changed and you will likely need to adjust one or both of them.
2024-02-15 20:42:48 +00:00
transform: Transform::from_xyz(4.0, 8.0, 4.0),
..default()
});
// camera
commands.spawn(Camera3dBundle {
transform: Transform::from_xyz(-2.0, 2.5, 5.0).looking_at(Vec3::ZERO, Vec3::Y),
..default()
});
commands.spawn(
TextBundle::from_section(
"Press <spacebar> to save a screenshot to disk",
TextStyle::default(),
)
.with_style(Style {
position_type: PositionType::Absolute,
top: Val::Px(12.0),
left: Val::Px(12.0),
..default()
}),
);
}