Resaec
840242b68e
started on centralized printing/logging
...
some character problems with "atmosphère" and such strings
2018-09-22 05:14:43 +02:00
hexkyz
f622eac36e
fusee: Finish implementing support for 6.0.0
2018-09-20 20:02:10 +01:00
hexkyz
f864b0835d
fusee: Add support for firmware version 6.0.0.
...
fusee: Implement splash screen rendering.
fusee: Add minor notes and update lz library.
2018-09-17 21:03:03 +01:00
hexkyz
39d812f434
fusee: Move nxboot hand-off to IRAM.
...
fusee/exosphere: Minor cleanup.
2018-09-15 21:08:58 +01:00
Michael Scire
d61ec20679
fusee: add fs.mitm kernel patches for 6.0.0
2018-09-10 15:54:14 -07:00
hexkyz
28e4d4411d
Add and fix copyright notices for better GPL compliance (thanks @naehrwert and @CTCaer).
2018-09-07 16:00:13 +01:00
hexkyz
2f8edfa8e2
fusee: Minor bugfixes.
2018-09-05 20:51:03 +01:00
hexkyz
ad4605abde
fusee: Fix a bug in cluster boot code.
2018-09-04 19:16:03 +01:00
hexkyz
5542352239
fusee: Fix CAR registers' definition.
2018-09-04 19:14:29 +01:00
hexkyz
8007480a15
fusee: Re-enable built-in PM system module.
2018-09-03 18:48:01 +01:00
hexkyz
abf57d2e43
fusee: Unmount *after* reading the splash screen.
2018-08-31 22:52:31 +00:00
hexkyz
58a42be38f
fusee: Comment out splash screen delay.
2018-08-31 22:46:08 +00:00
hexkyz
97d1ca3cc9
fusee: Disable built-in PM system module.
2018-08-31 20:10:06 +00:00
hexkyz
3cf37330ca
fusee: Disable AHB redirection when necessary.
...
fusee: Add 3.0.0/3.0.1/3.0.2 warmboot fix.
2018-08-30 19:49:33 +01:00
hexkyz
611e85e6ee
fusee: Implement BootConfig and Boot Reason handling.
2018-08-29 18:28:21 +01:00
hexkyz
8edec43be2
fusee: Add automatic firmware version detection.
2018-08-23 19:57:01 +01:00
hexkyz
e5bfb95c22
fusee: Add warmboot support.
2018-08-19 17:09:30 +01:00
hexkyz
320ec38be1
fusee: Complete re-write of the hardware initialization code:
...
- Updated code to match hekate's;
- Improved nxboot (now boots firmwares 2.x successfully);
- Temporarily disabled built-in boot system module support;
- Fixed multiple bugs.
2018-08-18 17:59:33 +01:00
hexkyz
6eac78595e
fusee-secondary: Remove restriction for loading from eMMC
2018-08-01 21:15:16 +01:00
Lioncash
4b8455baf9
fusee-secondary: Correct else-if condition in xmemmove()
...
Previously both the if and else conditions were the same.
2018-07-29 20:53:01 -07:00
Lioncash
bbdf2868c9
fusee-secondary/fs_dev: Correct uninitialized cast within fsdev_seek()
...
Previously this was casting the same unassigned variable that was being
assigned to.
2018-07-29 20:15:44 -07:00
Luke Street
a3d53fbb2c
Define wait() in fusee-primary/secondary
2018-07-29 10:53:06 -07:00
hexkyz
054c65dffb
Revert unnecessary change (thanks @rajkosto)
2018-07-26 19:26:43 +01:00
hexkyz
7836609839
Fix multiple issues reported by Coverity Scan
2018-07-26 18:45:18 +01:00
hexkyz
fd88bd1d2c
fusee: Disable the SDCLK when switching to low voltage.
2018-07-24 19:06:41 +01:00
hexkyz
e58927a8ab
fusee: Fix SDMMC high speed support and other bugs.
2018-07-23 20:14:53 +01:00
hexkyz
3db9ce32fa
Fusee: Deployed new SDMMC driver in fusee-secondary. All stages boot now.
...
Fusee: Fixed wrong argument in se.c function.
Fusee: Improved timers.
2018-07-19 21:07:53 +01:00
hexkyz
3394f0cf0d
Merge pull request #161 from TheDgtl/fix_4xx_kernel
...
Fix issue with fusee-secondary 4.x kernel patches
2018-07-04 22:06:11 +01:00
hexkyz
c5e9aec013
fusee: Temporarily disable anything that prevents the fusee-primary to fusee-secondary transition.
2018-07-04 22:04:41 +01:00
Drakia
6ab81e1780
Fix issue with fusee-secondary 4.x kernel patches
2018-07-01 17:50:02 -07:00
Benoit7413
0f6d4baa8e
Replace NAND by eMMC
...
Using NAND doens't really make sense
2018-06-26 08:49:50 +02:00
Michael Scire
9687218fbc
Fusee: lfs kernel patches for 3.0.0/3.0.2
2018-06-24 16:24:22 -06:00
Michael Scire
1252c4d5e1
Fusee: Complete hashes (Thanks @Thog), lfs patches for 2.0.0
2018-06-24 15:51:29 -06:00
Michael Scire
040cfa90d3
Fusee: Add kernel patches for 1.0.0.
2018-06-24 15:20:16 -06:00
Drakia
a446aca2c4
Fix a few issues in the secondary kernel_patches.c file
2018-06-17 19:28:19 -07:00
hexkyz
fca9ed2a15
Merge pull request #145 from Traiver/master
...
fusee: Add 4.1.0 kernel patch definitions
2018-06-17 16:56:36 +01:00
Traiver
33af704ee2
Update kernel_patches.c
2018-06-17 15:54:06 +02:00
Traiver
57819fa345
Update kernel_patches.c
2018-06-17 14:02:08 +02:00
Traiver
0295c8a51d
Update kernel_patches.c
2018-06-17 12:38:57 +02:00
Traiver
b211a7cf05
add kernel patches for 4.1.0
2018-06-17 11:00:42 +02:00
DavidBuchanan314
20a721a4a6
fusee: correct 4.x free_code_space_offset value
2018-06-13 22:26:00 +01:00
DavidBuchanan314
58d2f8f0a5
fusee: Add 3.0.0-3.0.1 kernel hash (and free_code_space_offset)
2018-06-13 22:08:18 +01:00
Tomasz Moń
206c10f333
Rework sdmmc clocking configuration
...
Use 204 MHz as host clock in SDR104 mode instead of 136 MHz.
Due to this, also change the frequency init divider so the
initialization frequency is below 400 kHz.
This makes the clocks for SDMMC1 in all modes to match the TRM table.
Make it clear in the code that HS200/HS400 modes in fact use PLLP_OUT0
and not PLLC4_OUT2_LJ like the comment suggest. In fact selecting the
PLLC4_OUT2_LJ as clock source results in freeze after switching to
HS200/HS400 mode. This is most likely related to the PLLC4 not being
enabled, but it should be checked later.
Set the HS200/HS400 divider to 3, as this is what the code really did
set prior to this change - so this commit does not change that.
Configure Legacy 12 MHz clock to run at 12 MHz using the SW default
configuration (as per TRM) for the SDMMC legacy timer.
Introduce initial version of sdmmc_host_clock_delay() in order to use it
in places where the wait is host clock dependent. The way it is
implemented now does not change the sleep that was used instead.
2018-06-12 17:20:15 +02:00
Max K
d8c9399cff
fusee: Run periodic autocal only on the uSD controller ( #137 )
2018-06-10 21:09:48 -07:00
hexkyz
ceb93867b4
Merge pull request #132 from tslater2006/master
...
Add sdmmc_dump_regs function
2018-06-10 16:21:18 +01:00
Tomasz Moń
804a40830e
Fix race conditions and misconfiguration in sdmmc
...
Properly configure pull up and pull down offsets for autocal.
Run autocal prior to every transfer.
Prevent race conditions in sdmmc_wait_for_event() - make sure the fault
handler has highest priority, then the target irq, state conditions and
finally the error mask.
Do not clear all bits (|=) when acknowledging fault conditions,
only acknowledge the fault conditions itself.
Enable interrupts before preparing command registers - if sdmmc is fast
enough it can actually finish transfer before we enabled the interrupts.
Enabling interrupts clears the COMMAND COMPLETE status bit.
Temporarily print all the sdmmc messages in stage2 - for yet unknown
reason respecting the log level results in some failures.
This results in working microsd card in stage2 on my switch with Samsung
EVO+ 256GB microsd card.
2018-06-09 17:37:53 +02:00
Timothy Slater
a79d3454d8
Switched to mmc_debug, and use inttypes
2018-06-08 07:50:36 -05:00
Timothy Slater
7df8ca7c4b
use printf instead of printk for secondary
2018-06-07 13:05:41 -05:00
Timothy Slater
ca907077af
Add sdmmc_dump_regs function
2018-06-07 12:55:29 -05:00
Tomasz Moń
7b9dcd2f1a
Make sdmmc autocalibration follow TRM procedure
...
Sleep for 1 us, not 1 ms.
Timeout after 10 ms, set driver strength code values according to TRM.
Fix typo (mS) - time is in milliseconds, not milliSiemens.
2018-06-05 19:07:14 +02:00
TuxSH
0491a21a99
Fix logic bug in stage2's main function
2018-06-05 16:18:02 +02:00
Max K
6b7da2887f
package2 verification and ini1 merging fixes ( #125 )
...
* fusee: Incremet offset while reading kip1s
* fusee: Pass package2 section data along with the decrypted metadata
2018-06-04 14:04:44 -07:00
TuxSH
b2139ed182
Pass screen status and mmc struct from stage1 to 2
2018-06-04 19:17:23 +02:00
hexkyz
7e5fda86b2
Merge pull request #114 from desowin/sdmmc-errata
...
Set SDMMC controller to SDR104 as a workaround
2018-06-04 16:20:19 +01:00
langerhans
41429e9120
fusee: Add kernel hash for 4.x
2018-06-03 16:59:21 +02:00
Michael Scire
968c86578a
Fusee: Add 5.x kernel patches to allow for IPC PID mitm.
2018-06-02 20:01:44 -06:00
Michael Scire
cc69079d73
Fusee: Add mechanism for branching back at end of hook.
2018-06-02 19:11:50 -06:00
Max K
8ec3a53d73
Fix CCPLEX bringup and halt the BPMP once it's done booting. ( #118 )
2018-06-02 17:24:02 -07:00
Michael Scire
b3a7086b7e
Fusee: Add infrastructure for applying kernel patches (needed for mitm)
2018-06-02 16:06:31 -06:00
Michael Scire
1ba8a92030
Fusee: Separate kernel patching into its own file.
2018-06-02 16:06:31 -06:00
Tomasz Moń
0534e36cf8
Set SDMMC controller to SDR104 as a workaround
...
According to Tegra X1 Series Processors Silicon Errata there is possible
misalignment of received data which results in a CRC error. The issue is
present only in SDR50 mode.
2018-05-27 17:43:25 +02:00
TuxSH
c9723d7b68
Refactor fusee's makefile
2018-05-27 00:59:02 +02:00
TuxSH
d57f4c54a9
Fix mmc->allow_voltage_switching assignment in sdmmc_init
2018-05-24 17:39:36 +02:00
TuxSH
4d43a86b60
Copy latest sdmmc driver to stage2
2018-05-24 01:17:13 +02:00
TuxSH
fd77e5543e
Add debug comment for exosphère
2018-05-23 18:46:39 +02:00
TuxSH
16ad355f45
Unstub "Validate section hashes."
2018-05-23 18:45:53 +02:00
Michael Scire
c64d7904b4
Fusee: Fix se_calculate_sha256
2018-05-21 13:07:46 -06:00
TuxSH
561fa90669
Use uintX_t for the SE & copy bugfixed SE struct definition
2018-05-21 19:05:00 +02:00
TuxSH
f39622c421
Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on
2018-05-21 18:42:42 +02:00
TuxSH
5920f5a4b0
Stage2: fix various bugs in package2.c
2018-05-21 18:18:12 +02:00
TuxSH
ffd0b5df6a
Fix bug in stratosphere_get_ini1, etc.
2018-05-21 17:45:05 +02:00
TuxSH
0e9a304533
stage2: package2: bypass hash checks for now
2018-05-21 17:42:10 +02:00
TuxSH
bf2c6dff25
Stage2: Add exception handlers
2018-05-21 03:50:53 +02:00
TuxSH
83d9d874e6
Fusee use CAR reboot for fatal errors
2018-05-20 23:52:09 +02:00
TuxSH
4ec7d0fc82
Remove packed when not needed
2018-05-20 22:57:25 +02:00
TuxSH
57ff5e694a
Don't check for panics in stage2
2018-05-20 22:00:11 +02:00
TuxSH
3dd6ec5f6c
wtf pmc reboot doesn't fully work -- display doesn't reinitialize
2018-05-20 16:56:15 +02:00
TuxSH
f45bc83bc4
Introduce fatal_error
2018-05-20 16:18:48 +02:00
TuxSH
ec7e0d923d
Add custom panic driver
2018-05-20 14:11:46 +02:00
TuxSH
c820375a86
Make struct tegra_pmc not packed
2018-05-20 01:40:23 +02:00
TuxSH
64cdd2e63f
Actually don't use memcpy in sdmmc
2018-05-19 03:10:06 +02:00
TuxSH
2a98e2e3b8
Sync sdmmc changes between stage1 and 2
2018-05-19 02:50:50 +02:00
TuxSH
2bc2fe1452
Use memcpy instead of raw casts in sdmmc.c
2018-05-19 01:33:07 +02:00
TuxSH
b4eeddd7e1
Revamp all the Makefiles (thanks @fincs @WinterMute)
...
... dependencies are now properly handled (e.g. header changes, etc.)
2018-05-19 01:07:27 +02:00
TuxSH
e0a5acd0ba
[stage2] Add more debugging printfs to package2.c, etc.
2018-05-18 00:24:06 +02:00
TuxSH
993db7ee95
Fix nxboot mkey rev misconception
2018-05-18 00:11:44 +02:00
TuxSH
ec6d05892c
Refactor nxboot package2 reading, work around sdmmc issue, other changes
2018-05-17 23:18:33 +02:00
TuxSH
9ed2f92cdc
[stage2] Fix some FS bugs
2018-05-17 19:53:42 +02:00
TuxSH
3dac6c9268
Fix bug in fusee: package2.c, etc.
2018-05-17 16:11:10 +02:00
TuxSH
1b07a07353
Fusee: Change package2 loading logic (untested)
2018-05-17 15:56:02 +02:00
Michael Scire
5088851de4
Fusee: fix unused var
2018-05-17 07:15:55 -06:00
Michael Scire
bb1dcb2655
Fusee: Implement BIS crypto functions.
2018-05-17 07:15:29 -06:00
TuxSH
5631b27449
Fix out-of-bounds partition r/w bugs in raw_dev.c
2018-05-17 14:39:16 +02:00
TuxSH
858b40e5fb
GPT entry LBA range is inclusive
2018-05-17 14:38:19 +02:00
TuxSH
85bfbeccc3
Fix latest commit
2018-05-17 02:07:11 +02:00
TuxSH
52d2af86b6
Fix BCT version parsing
2018-05-17 01:54:19 +02:00
TuxSH
9309b0bed5
Don't overflow devoptabs, etc.
2018-05-17 01:53:32 +02:00
TuxSH
468a063c03
Load the appropriate package1 key. The warmboot fw is now properly read.
2018-05-16 23:19:55 +02:00
TuxSH
348b2457e0
Fix key derivation regression
2018-05-16 23:04:54 +02:00
TuxSH
c71e7c8c2e
[stage2] Add "hexdump"
2018-05-16 19:59:14 +02:00
TuxSH
0d5796fa0b
Align crypto buffers to 16 bytes in key_derivation.c
2018-05-16 19:57:36 +02:00
TuxSH
ab4518b9c1
Simplify some logic in derive_nx_keydata
2018-05-16 18:41:16 +02:00
TuxSH
c0617982b8
Fix typo in decrypting all keyblobs (thanks @tslater2006 !)
2018-05-16 16:45:44 +02:00
Michael Scire
1182ea23a5
Fusee: Fix typo when decrypting keyblobs.
2018-05-16 02:39:13 -06:00
Michael Scire
fa71e9cb15
Fusee: Decrypt all keyblobs during key derivation.
2018-05-16 02:06:59 -06:00
TuxSH
f84645e91f
Simplify package1_get_encrypted_package1
2018-05-16 02:55:48 +02:00
TuxSH
34a658ce4c
Fix package1_read_and_parse_boot0
...
Key derivation is now working
2018-05-16 01:46:08 +02:00
TuxSH
db929925f3
Fix TSEC key fetching, thanks to @rajkosto
2018-05-16 00:37:07 +02:00
TuxSH
6c50723209
Fix tsec.c (thanks @rajkosto @tslater2006), fixes #106
2018-05-15 23:59:20 +02:00
TuxSH
9a86ffec68
Fix diskio.c, etc.
2018-05-15 23:54:33 +02:00
TuxSH
42fd4f73cf
Remove stray debug printf in gpt.c
2018-05-15 22:10:45 +02:00
TuxSH
60dbc7c9d7
┬┴┬┴┤( ͡° ͜ʖ├┬┴┬┴
2018-05-15 21:08:57 +02:00
Luke Street
f5ab896343
[stage2] Invert a few checks
2018-05-15 14:40:18 -04:00
TuxSH
62ebf20e25
Fix typo in nxboot.c
2018-05-15 20:24:37 +02:00
TuxSH
1288f54965
Finish writing stratosphere_get_ini1
2018-05-15 19:50:20 +02:00
TuxSH
3c0436b98f
Write more code for stratosphere_get_ini1, make it and its caller take target_firmware
2018-05-15 16:09:06 +02:00
TuxSH
4e1a368b43
Write more of stratosphere_get_ini1
2018-05-15 12:38:07 +02:00
TuxSH
af2de57fdc
Embed exosphere, thermosphere, loader, pm, sm into fusee-secondary
...
Still needs boot and boot2 to be built as proper KIPs
2018-05-15 02:45:31 +02:00
TuxSH
172a2b679c
Fix strncpy bugs in fusée, etc.
2018-05-15 01:18:05 +02:00
TuxSH
15bba0ba0c
Make loadlist empty when booting Horizon, more nxboot.c code
2018-05-14 21:17:06 +02:00
TuxSH
c2b22a6bf2
Write all the needed pk1 code and a large part of the nxboot function
2018-05-14 02:40:35 +02:00
TuxSH
17f4a17d17
[stage2] Add debug printf in main.c
2018-05-14 00:06:48 +02:00
TuxSH
bc7369b5d1
[stage2] Add dump_to_file
2018-05-14 00:03:05 +02:00
TuxSH
8df624a10d
Rename sd_utils to fs_utils, etc
2018-05-13 23:49:50 +02:00
TuxSH
a3792d94dc
[stage2] Support sector sizes up to 4K in FatFs.
...
Note: SD cards always have a sector size of 512 bytes.
2018-05-13 20:51:57 +02:00
TuxSH
9f53aa13d1
[stage2] Implement disk_status
2018-05-13 20:32:38 +02:00
TuxSH
4f50d412f5
Redesign fs_dev, raw_dev, introducing device_partition and switch_fs.
...
In theory, one could mount an encrypted FAT partition itself coming from a disk image, etc.
2018-05-13 19:53:55 +02:00
TuxSH
396a646fa3
[stage2] Add console_get_framebuffer
2018-05-12 21:39:29 +02:00
TuxSH
00f08321c7
[stage2] Accomodate raw_mmc_dev to latest sdmmc driver changes
2018-05-12 12:23:07 +02:00
TuxSH
75169790ff
stage1 -> stage2 again
2018-05-12 11:00:36 +02:00
TuxSH
f6f8065417
We actually need the pk1 key
2018-05-11 23:57:48 +02:00
TuxSH
4ada3b6195
Merge pull request #93 from encounter/fix/stage2-args
...
Fix stage2_args_t mismatch
2018-05-11 23:38:25 +02:00
TuxSH
6e43a71b5b
Fix misconception in latest commit
2018-05-11 23:12:22 +02:00
TuxSH
3ac3183c85
[stage2] Refactor key_derivation type and function declarations
2018-05-11 23:01:13 +02:00
TuxSH
eb8573093d
Move sd init into diskio.c, write code for latest commit
2018-05-11 22:24:40 +02:00
TuxSH
f8cf7adad7
Add code to register rawnand, boot0, and bcpkg2
2018-05-10 23:48:41 +02:00
TuxSH
a790760de3
raw_mmc_dev: fields should be u64
2018-05-10 23:23:14 +02:00
TuxSH
4168a33dd1
[stage2] Implement package1_parse_boot0
2018-05-10 22:53:46 +02:00
TuxSH
1dd073d8d2
[stage2] Add bct.h
2018-05-10 21:54:58 +02:00
TuxSH
ac9939b7a1
Apply sdmmc stage1 changes to stage2
2018-05-10 21:36:26 +02:00
TuxSH
5b5aa38486
[stage2] Add GPT parsing code (tested on PC)
2018-05-10 15:16:44 +02:00
TuxSH
20c225c829
[stage2] raw_mmc_dev.c: fix various bugs
2018-05-10 00:36:13 +02:00
TuxSH
3e68441040
[stage2] Make console.c manage the display, enable it only when needed
2018-05-09 22:20:14 +02:00
TuxSH
4217d7feef
[stage2] Unstub rawmmcdev_write
2018-05-09 20:52:21 +02:00
TuxSH
ff2472385f
[sdmmc] sdmmc_handle_cpu_transfer: handle unaligned buffers
2018-05-09 20:46:16 +02:00
TuxSH
b9b13e215f
Fix struct tegra_sdmmc definition
...
Definition errors were cancelling each other (for the most part)
2018-05-09 19:33:54 +02:00
TuxSH
3206583db3
[sdmmc] Fix const-correctness issue
2018-05-09 19:11:16 +02:00
TuxSH
7ad818ed93
Use latest sdmmc driver in stage2
2018-05-09 18:01:51 +02:00
TuxSH
694289de0b
Add raw_mmc_dev (untested!)
2018-05-09 17:51:13 +02:00
TuxSH
04f9920cc3
Rename g_devices to g_fsdev_devices
2018-05-09 17:26:30 +02:00
TuxSH
3fae01b08f
Rewrite condition in fsdev_seek
2018-05-09 17:10:35 +02:00
TuxSH
bf94bf48d2
Refine error in fsdev_mount_device
2018-05-09 14:16:33 +02:00
TuxSH
b2c82c75d0
Make stdout line-buffered
2018-05-09 11:49:10 +02:00
TuxSH
7560abbfbd
Fix FindDevice and RemoveDevice calls in fs_dev.c
2018-05-09 11:36:49 +02:00
Luke Street
290fb356a1
stage2: fix init malloc size for stage2_args_t
2018-05-08 23:24:27 -04:00
TuxSH
3682a56062
O_RDONLY is 0
2018-05-09 00:53:13 +02:00
TuxSH
77faa00a57
Rewrite package2.c
2018-05-09 00:19:51 +02:00
TuxSH
7df879d346
Change the allocation logic in stratosphere.c
2018-05-08 18:46:54 +02:00
TuxSH
70bb496388
Refactor stage1's and stage2's main.c files
2018-05-08 16:51:43 +02:00
TuxSH
50498e3b20
Don't deinit the display yet, for now
2018-05-08 15:44:48 +02:00
TuxSH
d43255d484
Fix bug in crt0
2018-05-08 14:56:17 +02:00
TuxSH
461e886244
Make di.c accept arbitrary FB addresses, fix flickering issues
2018-05-08 13:45:37 +02:00
TuxSH
170cd2d8c4
[stage2] Forgot to change that, too
2018-05-08 13:45:37 +02:00
TuxSH
d390ead56f
Fix faulty IRAM check in check_32bit_address_range_in_program
2018-05-08 13:45:37 +02:00
TuxSH
880f49cfa5
Fix inverted condition issue in check_32bit_address_range_loadable
2018-05-08 13:45:37 +02:00
TuxSH
e8306361f0
Rewrote crt0, init, and chainloading code
...
start.s, init.c, linker.ld and linker.specs are meant
to be re-used by user applications, should they remove the defines
from init.c and the .chainloader* sections from the linker script
2018-05-08 13:45:37 +02:00
TuxSH
699ddfc043
Simplify fsdev_set_default_device
2018-05-08 13:44:47 +02:00
TuxSH
5084f09081
Fix warning/error, etc. in fs_dev.c
2018-05-07 23:05:53 +02:00
TuxSH
25db9fcc4a
Fix fsdev_set_default_device bug
2018-05-07 14:25:01 +02:00
TuxSH
7695b5bdbd
[stage2] Fix the ordering of rules in linker script
2018-05-07 10:53:41 +02:00
Kate J. Temkin
5065a04451
fusee-secondary: don't create 3GiB output files :)
2018-05-06 21:49:42 -06:00
TuxSH
75dfcd07a9
Add chainloader (stage2) (need to edit more files)
2018-05-07 01:02:23 +02:00
TuxSH
2c07b5a2fb
Rework fs_dev mount code
2018-05-06 18:41:40 +02:00
TuxSH
a29e800661
Revert "Fix mount code in fs_dev.c"
...
This reverts commit 306555e522
.
2018-05-06 18:14:08 +02:00
TuxSH
8b418732ad
Upgrade FatFs to R0.13b
2018-05-06 18:00:22 +02:00
TuxSH
4265dc7b65
Don't pass the mmc struct around
2018-05-06 17:22:12 +02:00
TuxSH
68eec056a9
Fix const-correctness issue in sdmmc.h
2018-05-06 15:22:35 +02:00
TuxSH
1aa6b92bc4
Normalize drivers between stage1 and 2
2018-05-06 15:02:13 +02:00
TuxSH
306555e522
Fix mount code in fs_dev.c
2018-05-06 13:03:45 +02:00
TuxSH
8f5a5acb06
Fix the g_bct0 overflow issue, malloc now works
...
The linker chose the unused symbol from loader.c.
2018-05-06 11:46:48 +02:00
TuxSH
6e5d4b8fc9
Fix bss overflow error
2018-05-06 00:45:30 +02:00
TuxSH
8648cac77b
[stage2] Remove printk, introduce UTF-8 console stdio
2018-05-05 23:56:18 +02:00
TuxSH
30b9873ab3
Use the bloated string formatting functions from newlib
2018-05-05 18:35:00 +02:00
TuxSH
67b76cc8f1
Instead of passing FatFS structs around, unmount; other changes
2018-05-05 17:33:49 +02:00
TuxSH
0fca6c2296
[stage2] Add fatfs devoptab wrapper, change ffconf accordingly
2018-05-05 16:30:25 +02:00
TuxSH
e5fff14689
Move fatfs around
2018-05-05 00:11:22 +02:00
TuxSH
0d344e45af
Initialize heap, increase stack size
2018-05-04 23:56:01 +02:00
Michael Scire
4199be2460
Merge SD stuff into fusee-secondary. Switch diskio to single-sector reads temporarily
2018-05-04 11:47:05 -06:00
Max K
0807aaea2b
Fix small issues in the stage2 loader ( #78 )
...
* stage2 loader: Fix loadlist parsing breaking out of the loop too early
* stage2 loader: Use bct0 from the loader context
2018-05-03 13:08:30 -07:00
Michael Scire
ea609e68d3
Change read_sd_file semantics to return size read.
2018-04-26 04:47:22 -06:00
Rajko Stojadinovic
4e1c12a659
Fusee: Fix BisPartition enum to correctly identify partitions.
...
* BisPartition_t was missing SAFE, meaning User and System were using wrong key_source
* Normalize tabs to spaces
* Merge User and System BisPartition_t because they are the same key anyway
* Remove extra newline
2018-04-25 09:47:39 -07:00
Michael Scire
5742571153
Fusee: Fix overflow condition in SD KIP merging
2018-04-12 02:47:27 -06:00
Michael Scire
75b29e777b
Fusee: Update INI1 size after patching
2018-04-11 22:32:45 -06:00
Michael Scire
375a0b3fa8
Fusee: Actually write SD path in stratosphere_merge_inis
2018-04-11 22:10:02 -06:00
Michael Scire
0674c4b64f
Stratosphere: Add support for custom KIPs/INI in Fusee
2018-04-11 21:56:11 -06:00
Michael Scire
e5a0cb1abe
Fusee Stage 2: Flesh out Package2 patching (implement decryption, fixing of metadata)
2018-04-11 20:29:35 -06:00
Michael Scire
a0d2642bb1
Skeleton out framework for patching package2.
2018-04-11 18:19:01 -06:00
Michael Scire
3c24bfdb79
Fusee Stage2: skeleton more of the nxboot process
2018-04-10 16:37:58 -06:00
Michael Scire
9fadec60c5
Add skeleton architecture for displaying custom splash screen
2018-04-10 16:09:00 -06:00
Michael Scire
87605563d2
Restore incorrectly deleted files
2018-04-10 15:56:45 -06:00